//
def ARMtcall : SDNode<"ARMISD::tCALL", SDT_ARMcall,
- [SDNPHasChain, SDNPOptInFlag, SDNPOutFlag]>;
+ [SDNPHasChain, SDNPOptInFlag, SDNPOutFlag,
+ SDNPVariadic]>;
def imm_neg_XFORM : SDNodeXForm<imm, [{
return CurDAG->getTargetConstant(-(int)N->getZExtValue(), MVT::i32);
// Miscellaneous Instructions.
//
-let Defs = [SP], Uses = [SP] in {
+// FIXME: Marking these as hasSideEffects is necessary to prevent machine DCE
+// from removing one half of the matched pairs. That breaks PEI, which assumes
+// these will always be in pairs, and asserts if it finds otherwise. Better way?
+let Defs = [SP], Uses = [SP], hasSideEffects = 1 in {
def tADJCALLSTACKUP :
PseudoInst<(outs), (ins i32imm:$amt1, i32imm:$amt2), NoItinerary,
- "@ tADJCALLSTACKUP $amt1",
+ "${:comment} tADJCALLSTACKUP $amt1",
[(ARMcallseq_end imm:$amt1, imm:$amt2)]>, Requires<[IsThumb1Only]>;
def tADJCALLSTACKDOWN :
PseudoInst<(outs), (ins i32imm:$amt), NoItinerary,
- "@ tADJCALLSTACKDOWN $amt",
+ "${:comment} tADJCALLSTACKDOWN $amt",
[(ARMcallseq_start imm:$amt)]>, Requires<[IsThumb1Only]>;
}
+def tNOP : T1pI<(outs), (ins), NoItinerary, "nop", "",
+ [/* For disassembly only; pattern left blank */]>,
+ T1Encoding<0b101111> {
+ let Inst{9-8} = 0b11;
+ let Inst{7-0} = 0b00000000;
+}
+
+def tYIELD : T1pI<(outs), (ins), NoItinerary, "yield", "",
+ [/* For disassembly only; pattern left blank */]>,
+ T1Encoding<0b101111> {
+ let Inst{9-8} = 0b11;
+ let Inst{7-0} = 0b00010000;
+}
+
+def tWFE : T1pI<(outs), (ins), NoItinerary, "wfe", "",
+ [/* For disassembly only; pattern left blank */]>,
+ T1Encoding<0b101111> {
+ let Inst{9-8} = 0b11;
+ let Inst{7-0} = 0b00100000;
+}
+
+def tWFI : T1pI<(outs), (ins), NoItinerary, "wfi", "",
+ [/* For disassembly only; pattern left blank */]>,
+ T1Encoding<0b101111> {
+ let Inst{9-8} = 0b11;
+ let Inst{7-0} = 0b00110000;
+}
+
+def tSEV : T1pI<(outs), (ins), NoItinerary, "sev", "",
+ [/* For disassembly only; pattern left blank */]>,
+ T1Encoding<0b101111> {
+ let Inst{9-8} = 0b11;
+ let Inst{7-0} = 0b01000000;
+}
+
+def tSETENDBE : T1I<(outs), (ins), NoItinerary, "setend\tbe",
+ [/* For disassembly only; pattern left blank */]>,
+ T1Encoding<0b101101> {
+ let Inst{9-5} = 0b10010;
+ let Inst{3} = 1;
+}
+
+def tSETENDLE : T1I<(outs), (ins), NoItinerary, "setend\tle",
+ [/* For disassembly only; pattern left blank */]>,
+ T1Encoding<0b101101> {
+ let Inst{9-5} = 0b10010;
+ let Inst{3} = 0;
+}
+
+// The i32imm operand $val can be used by a debugger to store more information
+// about the breakpoint.
+def tBKPT : T1I<(outs), (ins i32imm:$val), NoItinerary, "bkpt\t$val",
+ [/* For disassembly only; pattern left blank */]>,
+ T1Encoding<0b101111> {
+ let Inst{9-8} = 0b10;
+}
+
+// Change Processor State is a system instruction -- for disassembly only.
+// The singleton $opt operand contains the following information:
+// opt{4-0} = mode ==> don't care
+// opt{5} = changemode ==> 0 (false for 16-bit Thumb instr)
+// opt{8-6} = AIF from Inst{2-0}
+// opt{10-9} = 1:imod from Inst{4} with 0b10 as enable and 0b11 as disable
+//
+// The opt{4-0} and opt{5} sub-fields are to accommodate 32-bit Thumb and ARM
+// CPS which has more options.
+def tCPS : T1I<(outs), (ins cps_opt:$opt), NoItinerary, "cps$opt",
+ [/* For disassembly only; pattern left blank */]>,
+ T1Misc<0b0110011>;
+
// For both thumb1 and thumb2.
let isNotDuplicable = 1 in
def tPICADD : TIt<(outs GPR:$dst), (ins GPR:$lhs, pclabel:$cp), IIC_iALUr,
T1Encoding<{1,0,1,0,0,?}>; // A6.2 & A8.6.10
// ADD rd, sp, #imm8
+// This is rematerializable, which is particularly useful for taking the
+// address of locals.
+let isReMaterializable = 1 in {
def tADDrSPi : T1I<(outs tGPR:$dst), (ins GPR:$sp, t_imm_s4:$rhs), IIC_iALUi,
"add\t$dst, $sp, $rhs", []>,
T1Encoding<{1,0,1,0,1,?}>; // A6.2 & A8.6.8
+}
// ADD sp, sp, #imm7
def tADDspi : TIt<(outs GPR:$dst), (ins GPR:$lhs, t_imm_s4:$rhs), IIC_iALUi,
let Inst{2-0} = 0b101;
}
-// Pseudo instruction that will expand into a tSUBspi + a copy.
-let usesCustomInserter = 1 in { // Expanded after instruction selection.
-def tSUBspi_ : PseudoInst<(outs GPR:$dst), (ins GPR:$lhs, t_imm_s4:$rhs),
- NoItinerary, "@ sub\t$dst, $rhs", []>;
-
-def tADDspr_ : PseudoInst<(outs GPR:$dst), (ins GPR:$lhs, GPR:$rhs),
- NoItinerary, "@ add\t$dst, $rhs", []>;
-
-let Defs = [CPSR] in
-def tANDsp : PseudoInst<(outs tGPR:$dst), (ins tGPR:$lhs, tGPR:$rhs),
- NoItinerary, "@ and\t$dst, $rhs", []>;
-} // usesCustomInserter
-
//===----------------------------------------------------------------------===//
// Control Flow Instructions.
//
let Inst{6-3} = 0b1110; // Rm = lr
}
// Alternative return instruction used by vararg functions.
- def tBX_RET_vararg : TI<(outs), (ins tGPR:$target), IIC_Br, "bx\t$target", []>,
+ def tBX_RET_vararg : TI<(outs), (ins tGPR:$target), IIC_Br, "bx\t$target",[]>,
T1Special<{1,1,0,?}>; // A6.2.3 & A8.6.25
}
let isBranch = 1, isTerminator = 1, isBarrier = 1, isIndirectBranch = 1 in {
def tBRIND : TI<(outs), (ins GPR:$dst), IIC_Br, "mov\tpc, $dst",
[(brind GPR:$dst)]>,
- T1Special<{1,0,1,1}> {
+ T1Special<{1,0,1,?}> {
// <Rd> = Inst{7:2-0} = pc
let Inst{2-0} = 0b111;
}
// FIXME: remove when we have a way to marking a MI with these properties.
let isReturn = 1, isTerminator = 1, isBarrier = 1, mayLoad = 1,
hasExtraDefRegAllocReq = 1 in
-def tPOP_RET : T1I<(outs), (ins pred:$p, reglist:$wb, variable_ops), IIC_Br,
- "pop${p}\t$wb", []>,
+def tPOP_RET : T1I<(outs), (ins pred:$p, reglist:$dsts, variable_ops), IIC_Br,
+ "pop${p}\t$dsts", []>,
T1Misc<{1,1,0,?,?,?,?}>;
let isCall = 1,
D24, D25, D26, D27, D28, D29, D30, D31, CPSR, FPSCR] in {
// Also used for Thumb2
def tBL : TIx2<0b11110, 0b11, 1,
- (outs), (ins i32imm:$func, variable_ops), IIC_Br,
+ (outs), (ins i32imm:$func, variable_ops), IIC_Br,
"bl\t${func:call}",
[(ARMtcall tglobaladdr:$func)]>,
Requires<[IsThumb, IsNotDarwin]>;
// ARMv5T and above, also used for Thumb2
def tBLXi : TIx2<0b11110, 0b11, 0,
- (outs), (ins i32imm:$func, variable_ops), IIC_Br,
+ (outs), (ins i32imm:$func, variable_ops), IIC_Br,
"blx\t${func:call}",
[(ARMcall tglobaladdr:$func)]>,
Requires<[IsThumb, HasV5T, IsNotDarwin]>;
// Also used for Thumb2
- def tBLXr : TI<(outs), (ins GPR:$func, variable_ops), IIC_Br,
+ def tBLXr : TI<(outs), (ins GPR:$func, variable_ops), IIC_Br,
"blx\t$func",
[(ARMtcall GPR:$func)]>,
Requires<[IsThumb, HasV5T, IsNotDarwin]>,
// ARMv4T
def tBX : TIx2<{?,?,?,?,?}, {?,?}, ?,
- (outs), (ins tGPR:$func, variable_ops), IIC_Br,
+ (outs), (ins tGPR:$func, variable_ops), IIC_Br,
"mov\tlr, pc\n\tbx\t$func",
[(ARMcall_nolink tGPR:$func)]>,
Requires<[IsThumb1Only, IsNotDarwin]>;
D24, D25, D26, D27, D28, D29, D30, D31, CPSR, FPSCR] in {
// Also used for Thumb2
def tBLr9 : TIx2<0b11110, 0b11, 1,
- (outs), (ins i32imm:$func, variable_ops), IIC_Br,
+ (outs), (ins i32imm:$func, variable_ops), IIC_Br,
"bl\t${func:call}",
[(ARMtcall tglobaladdr:$func)]>,
Requires<[IsThumb, IsDarwin]>;
// ARMv5T and above, also used for Thumb2
def tBLXi_r9 : TIx2<0b11110, 0b11, 0,
- (outs), (ins i32imm:$func, variable_ops), IIC_Br,
+ (outs), (ins i32imm:$func, variable_ops), IIC_Br,
"blx\t${func:call}",
[(ARMcall tglobaladdr:$func)]>,
Requires<[IsThumb, HasV5T, IsDarwin]>;
// Also used for Thumb2
- def tBLXr_r9 : TI<(outs), (ins GPR:$func, variable_ops), IIC_Br,
+ def tBLXr_r9 : TI<(outs), (ins GPR:$func, variable_ops), IIC_Br,
"blx\t$func",
[(ARMtcall GPR:$func)]>,
Requires<[IsThumb, HasV5T, IsDarwin]>,
// ARMv4T
def tBXr9 : TIx2<{?,?,?,?,?}, {?,?}, ?,
- (outs), (ins tGPR:$func, variable_ops), IIC_Br,
+ (outs), (ins tGPR:$func, variable_ops), IIC_Br,
"mov\tlr, pc\n\tbx\t$func",
[(ARMcall_nolink tGPR:$func)]>,
Requires<[IsThumb1Only, IsDarwin]>;
// Far jump
let Defs = [LR] in
- def tBfar : TIx2<0b11110, 0b11, 1, (outs), (ins brtarget:$target), IIC_Br,
- "bl\t$target\t@ far jump",[]>;
+ def tBfar : TIx2<0b11110, 0b11, 1, (outs), (ins brtarget:$target), IIC_Br,
+ "bl\t$target\t${:comment} far jump",[]>;
def tBR_JTr : T1JTI<(outs),
(ins tGPR:$target, jtblock_operand:$jt, i32imm:$id),
- IIC_Br, "mov\tpc, $target\n\t.align\t2\n$jt",
+ IIC_Br, "mov\tpc, $target\n\t.align\t2$jt",
[(ARMbrjt tGPR:$target, tjumptable:$jt, imm:$id)]>,
Encoding16 {
let Inst{15-7} = 0b010001101;
T1Misc<{1,0,?,1,?,?,?}>;
}
+// A8.6.218 Supervisor Call (Software Interrupt) -- for disassembly only
+// A8.6.16 B: Encoding T1
+// If Inst{11-8} == 0b1111 then SEE SVC
+let isCall = 1 in {
+def tSVC : T1pI<(outs), (ins i32imm:$svc), IIC_Br, "svc", "\t$svc", []>,
+ Encoding16 {
+ let Inst{15-12} = 0b1101;
+ let Inst{11-8} = 0b1111;
+}
+}
+
+// A8.6.16 B: Encoding T1
+// If Inst{11-8} == 0b1110 then UNDEFINED
+// FIXME: Temporary emitted as raw bytes until this pseudo-op will be added to
+// binutils
+let isBarrier = 1, isTerminator = 1 in
+def tTRAP : TI<(outs), (ins), IIC_Br,
+ ".short 0xdefe ${:comment} trap", [(trap)]>, Encoding16 {
+ let Inst{15-12} = 0b1101;
+ let Inst{11-8} = 0b1110;
+}
+
//===----------------------------------------------------------------------===//
// Load Store Instructions.
//
-let canFoldAsLoad = 1, isReMaterializable = 1, mayHaveSideEffects = 1 in
-def tLDR : T1pI4<(outs tGPR:$dst), (ins t_addrmode_s4:$addr), IIC_iLoadr,
+let canFoldAsLoad = 1, isReMaterializable = 1 in
+def tLDR : T1pI4<(outs tGPR:$dst), (ins t_addrmode_s4:$addr), IIC_iLoadr,
"ldr", "\t$dst, $addr",
[(set tGPR:$dst, (load t_addrmode_s4:$addr))]>,
T1LdSt<0b100>;
-def tLDRi: T1pI4<(outs tGPR:$dst), (ins t_addrmode_s4:$addr), IIC_iLoadr,
+def tLDRi: T1pI4<(outs tGPR:$dst), (ins t_addrmode_s4:$addr), IIC_iLoadr,
"ldr", "\t$dst, $addr",
[]>,
T1LdSt4Imm<{1,?,?}>;
// Special instruction for restore. It cannot clobber condition register
// when it's expanded by eliminateCallFramePseudoInstr().
-let canFoldAsLoad = 1, mayLoad = 1 in
+let canFoldAsLoad = 1, mayLoad = 1, neverHasSideEffects = 1 in
def tRestore : T1pIs<(outs tGPR:$dst), (ins t_addrmode_sp:$addr), IIC_iLoadi,
"ldr", "\t$dst, $addr", []>,
T1LdStSP<{1,?,?}>;
// Load tconstpool
// FIXME: Use ldr.n to work around a Darwin assembler bug.
-let canFoldAsLoad = 1, isReMaterializable = 1, mayHaveSideEffects = 1 in
+let canFoldAsLoad = 1, isReMaterializable = 1 in
def tLDRpci : T1pIs<(outs tGPR:$dst), (ins i32imm:$addr), IIC_iLoadi,
"ldr", ".n\t$dst, $addr",
[(set tGPR:$dst, (load (ARMWrapper tconstpool:$addr)))]>,
T1Encoding<{0,1,0,0,1,?}>; // A6.2 & A8.6.59
// Special LDR for loads from non-pc-relative constpools.
-let canFoldAsLoad = 1, mayLoad = 1, isReMaterializable = 1,
- mayHaveSideEffects = 1 in
+let canFoldAsLoad = 1, mayLoad = 1, neverHasSideEffects = 1,
+ isReMaterializable = 1 in
def tLDRcp : T1pIs<(outs tGPR:$dst), (ins i32imm:$addr), IIC_iLoadi,
"ldr", "\t$dst, $addr", []>,
T1LdStSP<{1,?,?}>;
[(store tGPR:$src, t_addrmode_sp:$addr)]>,
T1LdStSP<{0,?,?}>;
-let mayStore = 1 in {
+let mayStore = 1, neverHasSideEffects = 1 in {
// Special instruction for spill. It cannot clobber condition register
// when it's expanded by eliminateCallFramePseudoInstr().
def tSpill : T1pIs<(outs), (ins tGPR:$src, t_addrmode_sp:$addr), IIC_iStorei,
//
// These requires base address to be written back or one of the loaded regs.
-let mayLoad = 1, hasExtraDefRegAllocReq = 1 in
+let mayLoad = 1, neverHasSideEffects = 1, hasExtraDefRegAllocReq = 1 in {
def tLDM : T1I<(outs),
- (ins addrmode4:$addr, pred:$p, reglist:$wb, variable_ops),
+ (ins addrmode4:$addr, pred:$p, reglist:$dsts, variable_ops),
IIC_iLoadm,
- "ldm${addr:submode}${p}\t$addr, $wb", []>,
+ "ldm${addr:submode}${p}\t$addr, $dsts", []>,
T1Encoding<{1,1,0,0,1,?}>; // A6.2 & A8.6.53
-let mayStore = 1, hasExtraSrcRegAllocReq = 1 in
-def tSTM : T1I<(outs),
- (ins addrmode4:$addr, pred:$p, reglist:$wb, variable_ops),
- IIC_iStorem,
- "stm${addr:submode}${p}\t$addr, $wb", []>,
+def tLDM_UPD : T1It<(outs tGPR:$wb),
+ (ins addrmode4:$addr, pred:$p, reglist:$dsts, variable_ops),
+ IIC_iLoadm,
+ "ldm${addr:submode}${p}\t$addr!, $dsts",
+ "$addr.addr = $wb", []>,
+ T1Encoding<{1,1,0,0,1,?}>; // A6.2 & A8.6.53
+} // mayLoad, neverHasSideEffects = 1, hasExtraDefRegAllocReq
+
+let mayStore = 1, neverHasSideEffects = 1, hasExtraSrcRegAllocReq = 1 in
+def tSTM_UPD : T1It<(outs tGPR:$wb),
+ (ins addrmode4:$addr, pred:$p, reglist:$srcs, variable_ops),
+ IIC_iStorem,
+ "stm${addr:submode}${p}\t$addr!, $srcs",
+ "$addr.addr = $wb", []>,
T1Encoding<{1,1,0,0,0,?}>; // A6.2 & A8.6.189
let mayLoad = 1, Uses = [SP], Defs = [SP], hasExtraDefRegAllocReq = 1 in
-def tPOP : T1I<(outs), (ins pred:$p, reglist:$wb, variable_ops), IIC_Br,
- "pop${p}\t$wb", []>,
+def tPOP : T1I<(outs), (ins pred:$p, reglist:$dsts, variable_ops), IIC_Br,
+ "pop${p}\t$dsts", []>,
T1Misc<{1,1,0,?,?,?,?}>;
let mayStore = 1, Uses = [SP], Defs = [SP], hasExtraSrcRegAllocReq = 1 in
-def tPUSH : T1I<(outs), (ins pred:$p, reglist:$wb, variable_ops), IIC_Br,
- "push${p}\t$wb", []>,
+def tPUSH : T1I<(outs), (ins pred:$p, reglist:$srcs, variable_ops), IIC_Br,
+ "push${p}\t$srcs", []>,
T1Misc<{0,1,0,?,?,?,?}>;
//===----------------------------------------------------------------------===//
// CMN register
let Defs = [CPSR] in {
-def tCMN : T1pI<(outs), (ins tGPR:$lhs, tGPR:$rhs), IIC_iCMPr,
- "cmn", "\t$lhs, $rhs",
- [(ARMcmp tGPR:$lhs, (ineg tGPR:$rhs))]>,
- T1DataProcessing<0b1011>;
+//FIXME: Disable CMN, as CCodes are backwards from compare expectations
+// Compare-to-zero still works out, just not the relationals
+//def tCMN : T1pI<(outs), (ins tGPR:$lhs, tGPR:$rhs), IIC_iCMPr,
+// "cmn", "\t$lhs, $rhs",
+// [(ARMcmp tGPR:$lhs, (ineg tGPR:$rhs))]>,
+// T1DataProcessing<0b1011>;
def tCMNz : T1pI<(outs), (ins tGPR:$lhs, tGPR:$rhs), IIC_iCMPr,
"cmn", "\t$lhs, $rhs",
[(ARMcmpZ tGPR:$lhs, (ineg tGPR:$rhs))]>,
// FIXME: Make these predicable.
def tMOVgpr2tgpr : T1I<(outs tGPR:$dst), (ins GPR:$src), IIC_iMOVr,
"mov\t$dst, $src", []>,
- T1Special<{1,0,0,1}>;
+ T1Special<{1,0,0,?}>;
def tMOVtgpr2gpr : T1I<(outs GPR:$dst), (ins tGPR:$src), IIC_iMOVr,
"mov\t$dst, $src", []>,
- T1Special<{1,0,1,0}>;
+ T1Special<{1,0,?,0}>;
def tMOVgpr2gpr : T1I<(outs GPR:$dst), (ins GPR:$src), IIC_iMOVr,
"mov\t$dst, $src", []>,
- T1Special<{1,0,1,1}>;
+ T1Special<{1,0,?,?}>;
} // neverHasSideEffects
// multiply register
let isCommutable = 1 in
def tMUL : T1sIt<(outs tGPR:$dst), (ins tGPR:$lhs, tGPR:$rhs), IIC_iMUL32,
- "mul", "\t$dst, $rhs",
+ "mul", "\t$dst, $rhs, $dst", /* A8.6.105 MUL Encoding T1 */
[(set tGPR:$dst, (mul tGPR:$lhs, tGPR:$rhs))]>,
T1DataProcessing<0b1101>;
T1Misc<{0,0,1,0,1,0,?}>;
-// Conditional move tMOVCCr - Used to implement the Thumb SELECT_CC DAG operation.
+// Conditional move tMOVCCr - Used to implement the Thumb SELECT_CC operation.
// Expanded after instruction selection into a branch sequence.
let usesCustomInserter = 1 in // Expanded after instruction selection.
def tMOVCCr_pseudo :
PseudoInst<(outs tGPR:$dst), (ins tGPR:$false, tGPR:$true, pred:$cc),
- NoItinerary, "@ tMOVCCr $cc",
+ NoItinerary, "${:comment} tMOVCCr $cc",
[/*(set tGPR:$dst, (ARMcmov tGPR:$false, tGPR:$true, imm:$cc))*/]>;
// 16-bit movcc in IT blocks for Thumb2.
+let neverHasSideEffects = 1 in {
def tMOVCCr : T1pIt<(outs GPR:$dst), (ins GPR:$lhs, GPR:$rhs), IIC_iCMOVr,
"mov", "\t$dst, $rhs", []>,
- T1Special<{1,0,1,1}>;
+ T1Special<{1,0,?,?}>;
-def tMOVCCi : T1pIt<(outs GPR:$dst), (ins GPR:$lhs, i32imm:$rhs), IIC_iCMOVi,
+def tMOVCCi : T1pIt<(outs tGPR:$dst), (ins tGPR:$lhs, i32imm:$rhs), IIC_iCMOVi,
"mov", "\t$dst, $rhs", []>,
T1General<{1,0,0,?,?}>;
+} // neverHasSideEffects
// tLEApcrel - Load a pc-relative address into a register without offending the
// assembler.
+let neverHasSideEffects = 1 in {
+let isReMaterializable = 1 in
def tLEApcrel : T1I<(outs tGPR:$dst), (ins i32imm:$label, pred:$p), IIC_iALUi,
"adr$p\t$dst, #$label", []>,
T1Encoding<{1,0,1,0,0,?}>; // A6.2 & A8.6.10
+} // neverHasSideEffects
def tLEApcrelJT : T1I<(outs tGPR:$dst),
(ins i32imm:$label, nohash_imm:$id, pred:$p),
IIC_iALUi, "adr$p\t$dst, #${label}_${id}", []>,
// except for our own input by listing the relevant registers in Defs. By
// doing so, we also cause the prologue/epilogue code to actively preserve
// all of the callee-saved resgisters, which is exactly what we want.
+// $val is a scratch register for our use.
let Defs =
- [ R0, R1, R2, R3, R4, R5, R6, R7, R12 ] in {
- def tInt_eh_sjlj_setjmp : ThumbXI<(outs), (ins GPR:$src),
+ [ R0, R1, R2, R3, R4, R5, R6, R7, R12 ], hasSideEffects = 1,
+ isBarrier = 1 in {
+ def tInt_eh_sjlj_setjmp : ThumbXI<(outs),(ins tGPR:$src, tGPR:$val),
AddrModeNone, SizeSpecial, NoItinerary,
- "mov\tr12, r1\t@ begin eh.setjmp\n"
- "\tmov\tr1, sp\n"
- "\tstr\tr1, [$src, #8]\n"
- "\tadr\tr1, 0f\n"
- "\tadds\tr1, #1\n"
- "\tstr\tr1, [$src, #4]\n"
- "\tmov\tr1, r12\n"
- "\tmovs\tr0, #0\n"
- "\tb\t1f\n"
- ".align 2\n"
- "0:\tmovs\tr0, #1\t@ end eh.setjmp\n"
+ "mov\t$val, pc\t${:comment} begin eh.setjmp\n\t"
+ "adds\t$val, #7\n\t"
+ "str\t$val, [$src, #4]\n\t"
+ "movs\tr0, #0\n\t"
+ "b\t1f\n\t"
+ "movs\tr0, #1\t${:comment} end eh.setjmp\n\t"
"1:", "",
- [(set R0, (ARMeh_sjlj_setjmp GPR:$src))]>;
+ [(set R0, (ARMeh_sjlj_setjmp tGPR:$src, tGPR:$val))]>;
}
+
+// FIXME: Non-Darwin version(s)
+let isBarrier = 1, hasSideEffects = 1, isTerminator = 1,
+ Defs = [ R7, LR, SP ] in {
+def tInt_eh_sjlj_longjmp : XI<(outs), (ins GPR:$src, GPR:$scratch),
+ AddrModeNone, SizeSpecial, IndexModeNone,
+ Pseudo, NoItinerary,
+ "ldr\t$scratch, [$src, #8]\n\t"
+ "mov\tsp, $scratch\n\t"
+ "ldr\t$scratch, [$src, #4]\n\t"
+ "ldr\tr7, [$src]\n\t"
+ "bx\t$scratch", "",
+ [(ARMeh_sjlj_longjmp GPR:$src, GPR:$scratch)]>,
+ Requires<[IsThumb, IsDarwin]>;
+}
+
//===----------------------------------------------------------------------===//
// Non-Instruction Patterns
//
// scheduling.
let isReMaterializable = 1 in
def tLDRpci_pic : PseudoInst<(outs GPR:$dst), (ins i32imm:$addr, pclabel:$cp),
- NoItinerary, "@ ldr.n\t$dst, $addr\n$cp:\n\tadd\t$dst, pc",
+ NoItinerary,
+ "${:comment} ldr.n\t$dst, $addr\n$cp:\n\tadd\t$dst, pc",
[(set GPR:$dst, (ARMpic_add (load (ARMWrapper tconstpool:$addr)),
imm:$cp))]>,
Requires<[IsThumb1Only]>;
projects / oota-llvm.git / blobdiff