setLibcallCallingConv(RTLIB::FPEXT_F16_F32, CallingConv::ARM_APCS);
}
+ // In EABI, these functions have an __aeabi_ prefix, but in GNUEABI they have
+ // a __gnu_ prefix (which is the default).
+ if (Subtarget->isTargetAEABI()) {
+ setLibcallName(RTLIB::FPROUND_F32_F16, "__aeabi_f2h");
+ setLibcallName(RTLIB::FPROUND_F64_F16, "__aeabi_d2h");
+ setLibcallName(RTLIB::FPEXT_F16_F32, "__aeabi_h2f");
+ }
+
if (Subtarget->isThumb1Only())
addRegisterClass(MVT::i32, &ARM::tGPRRegClass);
else
case ARMISD::VORRIMM: return "ARMISD::VORRIMM";
case ARMISD::VBICIMM: return "ARMISD::VBICIMM";
case ARMISD::VBSL: return "ARMISD::VBSL";
+ case ARMISD::MEMCPY: return "ARMISD::MEMCPY";
case ARMISD::VLD2DUP: return "ARMISD::VLD2DUP";
case ARMISD::VLD3DUP: return "ARMISD::VLD3DUP";
case ARMISD::VLD4DUP: return "ARMISD::VLD4DUP";
CallingConv::ID CallerCC = CallerF->getCallingConv();
bool CCMatch = CallerCC == CalleeCC;
+ assert(Subtarget->supportsTailCall());
+
// Look for obvious safe cases to perform tail call optimization that do not
// require ABI changes. This is what gcc calls sibcall.
if (isCalleeStructRet || isCallerStructRet)
return false;
- // FIXME: Completely disable sibcall for Thumb1 since ThumbRegisterInfo::
- // emitEpilogue is not ready for them. Thumb tail calls also use t2B, as
- // the Thumb1 16-bit unconditional branch doesn't have sufficient relocation
- // support in the assembler and linker to be used. This would need to be
- // fixed to fully support tail calls in Thumb1.
- //
- // Doing this is tricky, since the LDM/POP instruction on Thumb doesn't take
- // LR. This means if we need to reload LR, it takes an extra instructions,
- // which outweighs the value of the tail call; but here we don't know yet
- // whether LR is going to be used. Probably the right approach is to
- // generate the tail call here and turn it back into CALL/RET in
- // emitEpilogue if LR is used.
-
- // Thumb1 PIC calls to external symbols use BX, so they can be tail calls,
- // but we need to make sure there are enough registers; the only valid
- // registers are the 4 used for parameters. We don't currently do this
- // case.
- if (Subtarget->isThumb1Only())
- return false;
-
// Externally-defined functions with weak linkage should not be
// tail-called on ARM when the OS does not support dynamic
// pre-emption of symbols, as the AAELF spec requires normal calls
if (!CI->isTailCall() || Attr.getValueAsString() == "true")
return false;
- return !Subtarget->isThumb1Only();
+ return true;
}
// Trying to write a 64 bit value so need to split into two 32 bit values first,
}
}
+/// \brief Attaches vregs to MEMCPY that it will use as scratch registers
+/// when it is expanded into LDM/STM. This is done as a post-isel lowering
+/// instead of as a custom inserter because we need the use list from the SDNode.
+static void attachMEMCPYScratchRegs(const ARMSubtarget *Subtarget,
+ MachineInstr *MI, const SDNode *Node) {
+ bool isThumb1 = Subtarget->isThumb1Only();
+
+ DebugLoc DL = MI->getDebugLoc();
+ MachineFunction *MF = MI->getParent()->getParent();
+ MachineRegisterInfo &MRI = MF->getRegInfo();
+ MachineInstrBuilder MIB(*MF, MI);
+
+ // If the new dst/src is unused mark it as dead.
+ if (!Node->hasAnyUseOfValue(0)) {
+ MI->getOperand(0).setIsDead(true);
+ }
+ if (!Node->hasAnyUseOfValue(1)) {
+ MI->getOperand(1).setIsDead(true);
+ }
+
+ // The MEMCPY both defines and kills the scratch registers.
+ for (unsigned I = 0; I != MI->getOperand(4).getImm(); ++I) {
+ unsigned TmpReg = MRI.createVirtualRegister(isThumb1 ? &ARM::tGPRRegClass
+ : &ARM::GPRRegClass);
+ MIB.addReg(TmpReg, RegState::Define|RegState::Dead);
+ }
+}
+
void ARMTargetLowering::AdjustInstrPostInstrSelection(MachineInstr *MI,
SDNode *Node) const {
+ if (MI->getOpcode() == ARM::MEMCPY) {
+ attachMEMCPYScratchRegs(Subtarget, MI, Node);
+ return;
+ }
+
const MCInstrDesc *MCID = &MI->getDesc();
// Adjust potentially 's' setting instructions after isel, i.e. ADC, SBC, RSB,
// RSC. Coming out of isel, they have an implicit CPSR def, but the optional
return SDValue();
}
-// isConstVecPow2 - Return true if each vector element is a power of 2, all
-// elements are the same constant, C, and Log2(C) ranges from 1 to 32.
-static bool isConstVecPow2(SDValue ConstVec, bool isSigned, uint64_t &C)
-{
- integerPart cN;
- integerPart c0 = 0;
- for (unsigned I = 0, E = ConstVec.getValueType().getVectorNumElements();
- I != E; I++) {
- ConstantFPSDNode *C = dyn_cast<ConstantFPSDNode>(ConstVec.getOperand(I));
- if (!C)
- return false;
-
- bool isExact;
- APFloat APF = C->getValueAPF();
- if (APF.convertToInteger(&cN, 64, isSigned, APFloat::rmTowardZero, &isExact)
- != APFloat::opOK || !isExact)
- return false;
-
- c0 = (I == 0) ? cN : c0;
- if (!isPowerOf2_64(cN) || c0 != cN || Log2_64(c0) < 1 || Log2_64(c0) > 32)
- return false;
- }
- C = c0;
- return true;
-}
-
/// PerformVCVTCombine - VCVT (floating-point to fixed-point, Advanced SIMD)
/// can replace combinations of VMUL and VCVT (floating-point to integer)
/// when the VMUL has a constant operand that is a power of 2.
/// vcvt.s32.f32 d16, d16
/// becomes:
/// vcvt.s32.f32 d16, d16, #3
-static SDValue PerformVCVTCombine(SDNode *N,
- TargetLowering::DAGCombinerInfo &DCI,
+static SDValue PerformVCVTCombine(SDNode *N, SelectionDAG &DAG,
const ARMSubtarget *Subtarget) {
- SelectionDAG &DAG = DCI.DAG;
- SDValue Op = N->getOperand(0);
+ if (!Subtarget->hasNEON())
+ return SDValue();
- if (!Subtarget->hasNEON() || !Op.getValueType().isVector() ||
- Op.getOpcode() != ISD::FMUL)
+ SDValue Op = N->getOperand(0);
+ if (!Op.getValueType().isVector() || Op.getOpcode() != ISD::FMUL)
return SDValue();
- uint64_t C;
- SDValue N0 = Op->getOperand(0);
SDValue ConstVec = Op->getOperand(1);
- bool isSigned = N->getOpcode() == ISD::FP_TO_SINT;
-
- if (ConstVec.getOpcode() != ISD::BUILD_VECTOR ||
- !isConstVecPow2(ConstVec, isSigned, C))
+ if (!isa<BuildVectorSDNode>(ConstVec))
return SDValue();
MVT FloatTy = Op.getSimpleValueType().getVectorElementType();
+ uint32_t FloatBits = FloatTy.getSizeInBits();
MVT IntTy = N->getSimpleValueType(0).getVectorElementType();
+ uint32_t IntBits = IntTy.getSizeInBits();
unsigned NumLanes = Op.getValueType().getVectorNumElements();
- if (FloatTy.getSizeInBits() != 32 || IntTy.getSizeInBits() > 32 ||
- NumLanes > 4) {
+ if (FloatBits != 32 || IntBits > 32 || NumLanes > 4) {
// These instructions only exist converting from f32 to i32. We can handle
// smaller integers by generating an extra truncate, but larger ones would
// be lossy. We also can't handle more then 4 lanes, since these intructions
return SDValue();
}
+ BitVector UndefElements;
+ BuildVectorSDNode *BV = cast<BuildVectorSDNode>(ConstVec);
+ int32_t C = BV->getConstantFPSplatPow2ToLog2Int(&UndefElements, 33);
+ if (C == -1 || C == 0 || C > 32)
+ return SDValue();
+
SDLoc dl(N);
+ bool isSigned = N->getOpcode() == ISD::FP_TO_SINT;
unsigned IntrinsicOpcode = isSigned ? Intrinsic::arm_neon_vcvtfp2fxs :
Intrinsic::arm_neon_vcvtfp2fxu;
- SDValue FixConv = DAG.getNode(ISD::INTRINSIC_WO_CHAIN, dl,
- NumLanes == 2 ? MVT::v2i32 : MVT::v4i32,
- DAG.getConstant(IntrinsicOpcode, dl, MVT::i32),
- N0,
- DAG.getConstant(Log2_64(C), dl, MVT::i32));
+ SDValue FixConv = DAG.getNode(
+ ISD::INTRINSIC_WO_CHAIN, dl, NumLanes == 2 ? MVT::v2i32 : MVT::v4i32,
+ DAG.getConstant(IntrinsicOpcode, dl, MVT::i32), Op->getOperand(0),
+ DAG.getConstant(C, dl, MVT::i32));
- if (IntTy.getSizeInBits() < FloatTy.getSizeInBits())
+ if (IntBits < FloatBits)
FixConv = DAG.getNode(ISD::TRUNCATE, dl, N->getValueType(0), FixConv);
return FixConv;
/// vdiv.f32 d16, d17, d16
/// becomes:
/// vcvt.f32.s32 d16, d16, #3
-static SDValue PerformVDIVCombine(SDNode *N,
- TargetLowering::DAGCombinerInfo &DCI,
+static SDValue PerformVDIVCombine(SDNode *N, SelectionDAG &DAG,
const ARMSubtarget *Subtarget) {
- SelectionDAG &DAG = DCI.DAG;
+ if (!Subtarget->hasNEON())
+ return SDValue();
+
SDValue Op = N->getOperand(0);
unsigned OpOpcode = Op.getNode()->getOpcode();
-
- if (!Subtarget->hasNEON() || !N->getValueType(0).isVector() ||
+ if (!N->getValueType(0).isVector() ||
(OpOpcode != ISD::SINT_TO_FP && OpOpcode != ISD::UINT_TO_FP))
return SDValue();
- uint64_t C;
SDValue ConstVec = N->getOperand(1);
- bool isSigned = OpOpcode == ISD::SINT_TO_FP;
-
- if (ConstVec.getOpcode() != ISD::BUILD_VECTOR ||
- !isConstVecPow2(ConstVec, isSigned, C))
+ if (!isa<BuildVectorSDNode>(ConstVec))
return SDValue();
MVT FloatTy = N->getSimpleValueType(0).getVectorElementType();
+ uint32_t FloatBits = FloatTy.getSizeInBits();
MVT IntTy = Op.getOperand(0).getSimpleValueType().getVectorElementType();
- if (FloatTy.getSizeInBits() != 32 || IntTy.getSizeInBits() > 32) {
+ uint32_t IntBits = IntTy.getSizeInBits();
+ unsigned NumLanes = Op.getValueType().getVectorNumElements();
+ if (FloatBits != 32 || IntBits > 32 || NumLanes > 4) {
// These instructions only exist converting from i32 to f32. We can handle
// smaller integers by generating an extra extend, but larger ones would
- // be lossy.
+ // be lossy. We also can't handle more then 4 lanes, since these intructions
+ // only support v2i32/v4i32 types.
return SDValue();
}
+ BitVector UndefElements;
+ BuildVectorSDNode *BV = cast<BuildVectorSDNode>(ConstVec);
+ int32_t C = BV->getConstantFPSplatPow2ToLog2Int(&UndefElements, 33);
+ if (C == -1 || C == 0 || C > 32)
+ return SDValue();
+
SDLoc dl(N);
+ bool isSigned = OpOpcode == ISD::SINT_TO_FP;
SDValue ConvInput = Op.getOperand(0);
- unsigned NumLanes = Op.getValueType().getVectorNumElements();
- if (IntTy.getSizeInBits() < FloatTy.getSizeInBits())
+ if (IntBits < FloatBits)
ConvInput = DAG.getNode(isSigned ? ISD::SIGN_EXTEND : ISD::ZERO_EXTEND,
dl, NumLanes == 2 ? MVT::v2i32 : MVT::v4i32,
ConvInput);
return DAG.getNode(ISD::INTRINSIC_WO_CHAIN, dl,
Op.getValueType(),
DAG.getConstant(IntrinsicOpcode, dl, MVT::i32),
- ConvInput, DAG.getConstant(Log2_64(C), dl, MVT::i32));
+ ConvInput, DAG.getConstant(C, dl, MVT::i32));
}
/// Getvshiftimm - Check if this is a valid build_vector for the immediate
case ISD::VECTOR_SHUFFLE: return PerformVECTOR_SHUFFLECombine(N, DCI.DAG);
case ARMISD::VDUPLANE: return PerformVDUPLANECombine(N, DCI);
case ISD::FP_TO_SINT:
- case ISD::FP_TO_UINT: return PerformVCVTCombine(N, DCI, Subtarget);
- case ISD::FDIV: return PerformVDIVCombine(N, DCI, Subtarget);
+ case ISD::FP_TO_UINT:
+ return PerformVCVTCombine(N, DCI.DAG, Subtarget);
+ case ISD::FDIV:
+ return PerformVDIVCombine(N, DCI.DAG, Subtarget);
case ISD::INTRINSIC_WO_CHAIN: return PerformIntrinsicCombine(N, DCI.DAG);
case ISD::SHL:
case ISD::SRA:
void ARMTargetLowering::emitAtomicCmpXchgNoStoreLLBalance(
IRBuilder<> &Builder) const {
+ if (!Subtarget->hasV7Ops())
+ return;
Module *M = Builder.GetInsertBlock()->getParent()->getParent();
Builder.CreateCall(llvm::Intrinsic::getDeclaration(M, Intrinsic::arm_clrex));
}
unsigned VecSize = DL.getTypeAllocSizeInBits(VecTy);
bool EltIs64Bits = DL.getTypeAllocSizeInBits(EltTy) == 64;
- // Skip illegal vector types and vector types of i64/f64 element (vldN doesn't
- // support i64/f64 element).
- if ((VecSize != 64 && VecSize != 128) || EltIs64Bits)
+ // Skip if we do not have NEON and skip illegal vector types and vector types
+ // with i64/f64 elements (vldN doesn't support i64/f64 elements).
+ if (!Subtarget->hasNEON() || (VecSize != 64 && VecSize != 128) || EltIs64Bits)
return false;
// A pointer vector can not be the return type of the ldN intrinsics. Need to
Intrinsic::arm_neon_vld3,
Intrinsic::arm_neon_vld4};
- Function *VldnFunc =
- Intrinsic::getDeclaration(LI->getModule(), LoadInts[Factor - 2], VecTy);
-
IRBuilder<> Builder(LI);
SmallVector<Value *, 2> Ops;
Ops.push_back(Builder.CreateBitCast(LI->getPointerOperand(), Int8Ptr));
Ops.push_back(Builder.getInt32(LI->getAlignment()));
+ Type *Tys[] = { VecTy, Int8Ptr };
+ Function *VldnFunc =
+ Intrinsic::getDeclaration(LI->getModule(), LoadInts[Factor - 2], Tys);
CallInst *VldN = Builder.CreateCall(VldnFunc, Ops, "vldN");
// Replace uses of each shufflevector with the corresponding vector loaded
unsigned SubVecSize = DL.getTypeAllocSizeInBits(SubVecTy);
bool EltIs64Bits = DL.getTypeAllocSizeInBits(EltTy) == 64;
- // Skip illegal sub vector types and vector types of i64/f64 element (vstN
- // doesn't support i64/f64 element).
- if ((SubVecSize != 64 && SubVecSize != 128) || EltIs64Bits)
+ // Skip if we do not have NEON and skip illegal vector types and vector types
+ // with i64/f64 elements (vstN doesn't support i64/f64 elements).
+ if (!Subtarget->hasNEON() || (SubVecSize != 64 && SubVecSize != 128) ||
+ EltIs64Bits)
return false;
Value *Op0 = SVI->getOperand(0);
static Intrinsic::ID StoreInts[3] = {Intrinsic::arm_neon_vst2,
Intrinsic::arm_neon_vst3,
Intrinsic::arm_neon_vst4};
- Function *VstNFunc = Intrinsic::getDeclaration(
- SI->getModule(), StoreInts[Factor - 2], SubVecTy);
-
SmallVector<Value *, 6> Ops;
Type *Int8Ptr = Builder.getInt8PtrTy(SI->getPointerAddressSpace());
Ops.push_back(Builder.CreateBitCast(SI->getPointerOperand(), Int8Ptr));
+ Type *Tys[] = { Int8Ptr, SubVecTy };
+ Function *VstNFunc = Intrinsic::getDeclaration(
+ SI->getModule(), StoreInts[Factor - 2], Tys);
+
// Split the shufflevector operands into sub vectors for the new vstN call.
for (unsigned i = 0; i < Factor; i++)
Ops.push_back(Builder.CreateShuffleVector(