#include "llvm/CodeGen/LiveVariables.h"
#include "llvm/CodeGen/MachineFunctionPass.h"
#include "llvm/CodeGen/MachineInstr.h"
+#include "llvm/CodeGen/MachineInstrBuilder.h"
#include "llvm/CodeGen/MachineRegisterInfo.h"
#include "llvm/Analysis/AliasAnalysis.h"
#include "llvm/Target/TargetRegisterInfo.h"
void ProcessCopy(MachineInstr *MI, MachineBasicBlock *MBB,
SmallPtrSet<MachineInstr*, 8> &Processed);
+ void CoalesceExtSubRegs(SmallVector<unsigned,4> &Srcs, unsigned DstReg);
+
/// EliminateRegSequences - Eliminate REG_SEQUENCE instructions as part
/// of the de-ssa process. This replaces sources of REG_SEQUENCE as
/// sub-register references of the register defined by REG_SEQUENCE.
bool EliminateRegSequences();
+
public:
static char ID; // Pass identification, replacement for typeid
- TwoAddressInstructionPass() : MachineFunctionPass(&ID) {}
+ TwoAddressInstructionPass() : MachineFunctionPass(ID) {
+ initializeTwoAddressInstructionPassPass(*PassRegistry::getPassRegistry());
+ }
virtual void getAnalysisUsage(AnalysisUsage &AU) const {
AU.setPreservesCFG();
AU.addPreserved<LiveVariables>();
AU.addPreservedID(MachineLoopInfoID);
AU.addPreservedID(MachineDominatorsID);
- if (StrongPHIElim)
- AU.addPreservedID(StrongPHIEliminationID);
- else
- AU.addPreservedID(PHIEliminationID);
+ AU.addPreservedID(PHIEliminationID);
MachineFunctionPass::getAnalysisUsage(AU);
}
}
char TwoAddressInstructionPass::ID = 0;
-static RegisterPass<TwoAddressInstructionPass>
-X("twoaddressinstruction", "Two-Address instruction pass");
+INITIALIZE_PASS_BEGIN(TwoAddressInstructionPass, "twoaddressinstruction",
+ "Two-Address instruction pass", false, false)
+INITIALIZE_AG_DEPENDENCY(AliasAnalysis)
+INITIALIZE_PASS_END(TwoAddressInstructionPass, "twoaddressinstruction",
+ "Two-Address instruction pass", false, false)
-const PassInfo *const llvm::TwoAddressInstructionPassID = &X;
+char &llvm::TwoAddressInstructionPassID = TwoAddressInstructionPass::ID;
/// Sink3AddrInstruction - A two-address instruction has been converted to a
/// three-address instruction to avoid clobbering a register. Try to sink it
bool &IsSrcPhys, bool &IsDstPhys) {
SrcReg = 0;
DstReg = 0;
- unsigned SrcSubIdx, DstSubIdx;
- if (!TII->isMoveInstr(MI, SrcReg, DstReg, SrcSubIdx, DstSubIdx)) {
- if (MI.isExtractSubreg()) {
- DstReg = MI.getOperand(0).getReg();
- SrcReg = MI.getOperand(1).getReg();
- } else if (MI.isInsertSubreg()) {
- DstReg = MI.getOperand(0).getReg();
- SrcReg = MI.getOperand(2).getReg();
- } else if (MI.isSubregToReg()) {
- DstReg = MI.getOperand(0).getReg();
- SrcReg = MI.getOperand(2).getReg();
- }
- }
+ if (MI.isCopy()) {
+ DstReg = MI.getOperand(0).getReg();
+ SrcReg = MI.getOperand(1).getReg();
+ } else if (MI.isInsertSubreg() || MI.isSubregToReg()) {
+ DstReg = MI.getOperand(0).getReg();
+ SrcReg = MI.getOperand(2).getReg();
+ } else
+ return false;
- if (DstReg) {
- IsSrcPhys = TargetRegisterInfo::isPhysicalRegister(SrcReg);
- IsDstPhys = TargetRegisterInfo::isPhysicalRegister(DstReg);
- return true;
- }
- return false;
+ IsSrcPhys = TargetRegisterInfo::isPhysicalRegister(SrcReg);
+ IsDstPhys = TargetRegisterInfo::isPhysicalRegister(DstReg);
+ return true;
}
/// isKilled - Test if the given register value, which is used by the given
unsigned ToRegB = getMappedReg(regB, DstRegMap);
unsigned ToRegC = getMappedReg(regC, DstRegMap);
if (!regsAreCompatible(FromRegB, ToRegB, TRI) &&
- (regsAreCompatible(FromRegB, ToRegC, TRI) ||
+ ((!FromRegC && !ToRegC) ||
+ regsAreCompatible(FromRegB, ToRegC, TRI) ||
regsAreCompatible(FromRegC, ToRegB, TRI)))
return true;
if (!LastKill)
return false;
- bool isModRef = LastKill->modifiesRegister(Kill);
+ bool isModRef = LastKill->definesRegister(Kill);
NewKills.push_back(std::make_pair(std::make_pair(Kill, isModRef),
LastKill));
}
}
}
}
+
+ // If this is an instruction with a load folded into it, try unfolding
+ // the load, e.g. avoid this:
+ // movq %rdx, %rcx
+ // addq (%rax), %rcx
+ // in favor of this:
+ // movq (%rax), %rcx
+ // addq %rdx, %rcx
+ // because it's preferable to schedule a load than a register copy.
+ if (TID.mayLoad() && !regBKilled) {
+ // Determine if a load can be unfolded.
+ unsigned LoadRegIndex;
+ unsigned NewOpc =
+ TII->getOpcodeAfterMemoryUnfold(mi->getOpcode(),
+ /*UnfoldLoad=*/true,
+ /*UnfoldStore=*/false,
+ &LoadRegIndex);
+ if (NewOpc != 0) {
+ const TargetInstrDesc &UnfoldTID = TII->get(NewOpc);
+ if (UnfoldTID.getNumDefs() == 1) {
+ MachineFunction &MF = *mbbi->getParent();
+
+ // Unfold the load.
+ DEBUG(dbgs() << "2addr: UNFOLDING: " << *mi);
+ const TargetRegisterClass *RC =
+ UnfoldTID.OpInfo[LoadRegIndex].getRegClass(TRI);
+ unsigned Reg = MRI->createVirtualRegister(RC);
+ SmallVector<MachineInstr *, 2> NewMIs;
+ if (!TII->unfoldMemoryOperand(MF, mi, Reg,
+ /*UnfoldLoad=*/true,/*UnfoldStore=*/false,
+ NewMIs)) {
+ DEBUG(dbgs() << "2addr: ABANDONING UNFOLD\n");
+ return false;
+ }
+ assert(NewMIs.size() == 2 &&
+ "Unfolded a load into multiple instructions!");
+ // The load was previously folded, so this is the only use.
+ NewMIs[1]->addRegisterKilled(Reg, TRI);
+
+ // Tentatively insert the instructions into the block so that they
+ // look "normal" to the transformation logic.
+ mbbi->insert(mi, NewMIs[0]);
+ mbbi->insert(mi, NewMIs[1]);
+
+ DEBUG(dbgs() << "2addr: NEW LOAD: " << *NewMIs[0]
+ << "2addr: NEW INST: " << *NewMIs[1]);
+
+ // Transform the instruction, now that it no longer has a load.
+ unsigned NewDstIdx = NewMIs[1]->findRegisterDefOperandIdx(regA);
+ unsigned NewSrcIdx = NewMIs[1]->findRegisterUseOperandIdx(regB);
+ MachineBasicBlock::iterator NewMI = NewMIs[1];
+ bool TransformSuccess =
+ TryInstructionTransform(NewMI, mi, mbbi,
+ NewSrcIdx, NewDstIdx, Dist);
+ if (TransformSuccess ||
+ NewMIs[1]->getOperand(NewSrcIdx).isKill()) {
+ // Success, or at least we made an improvement. Keep the unfolded
+ // instructions and discard the original.
+ if (LV) {
+ for (unsigned i = 0, e = mi->getNumOperands(); i != e; ++i) {
+ MachineOperand &MO = mi->getOperand(i);
+ if (MO.isReg() && MO.getReg() != 0 &&
+ TargetRegisterInfo::isVirtualRegister(MO.getReg())) {
+ if (MO.isUse()) {
+ if (MO.isKill()) {
+ if (NewMIs[0]->killsRegister(MO.getReg()))
+ LV->replaceKillInstruction(MO.getReg(), mi, NewMIs[0]);
+ else {
+ assert(NewMIs[1]->killsRegister(MO.getReg()) &&
+ "Kill missing after load unfold!");
+ LV->replaceKillInstruction(MO.getReg(), mi, NewMIs[1]);
+ }
+ }
+ } else if (LV->removeVirtualRegisterDead(MO.getReg(), mi)) {
+ if (NewMIs[1]->registerDefIsDead(MO.getReg()))
+ LV->addVirtualRegisterDead(MO.getReg(), NewMIs[1]);
+ else {
+ assert(NewMIs[0]->registerDefIsDead(MO.getReg()) &&
+ "Dead flag missing after load unfold!");
+ LV->addVirtualRegisterDead(MO.getReg(), NewMIs[0]);
+ }
+ }
+ }
+ }
+ LV->addVirtualRegisterKilled(Reg, NewMIs[1]);
+ }
+ mi->eraseFromParent();
+ mi = NewMIs[1];
+ if (TransformSuccess)
+ return true;
+ } else {
+ // Transforming didn't eliminate the tie and didn't lead to an
+ // improvement. Clean up the unfolded instructions and keep the
+ // original.
+ DEBUG(dbgs() << "2addr: ABANDONING UNFOLD\n");
+ NewMIs[0]->eraseFromParent();
+ NewMIs[1]->eraseFromParent();
+ }
+ }
+ }
+ }
+
return false;
}
isProfitableToReMat(regB, rc, mi, DefMI, mbbi, Dist)){
DEBUG(dbgs() << "2addr: REMATTING : " << *DefMI << "\n");
unsigned regASubIdx = mi->getOperand(DstIdx).getSubReg();
- TII->reMaterialize(*mbbi, mi, regA, regASubIdx, DefMI, TRI);
+ TII->reMaterialize(*mbbi, mi, regA, regASubIdx, DefMI, *TRI);
ReMatRegs.set(regB);
++NumReMats;
} else {
- bool Emitted = TII->copyRegToReg(*mbbi, mi, regA, regB, rc, rc,
- mi->getDebugLoc());
- (void)Emitted;
- assert(Emitted && "Unable to issue a copy instruction!\n");
+ BuildMI(*mbbi, mi, mi->getDebugLoc(), TII->get(TargetOpcode::COPY),
+ regA).addReg(regB);
}
MachineBasicBlock::iterator prevMI = prior(mi);
}
}
}
-
+
+ // Schedule the source copy / remat inserted to form two-address
+ // instruction. FIXME: Does it matter the distance map may not be
+ // accurate after it's scheduled?
+ TII->scheduleTwoAddrSource(prior(mi), mi, *TRI);
+
MadeChange = true;
DEBUG(dbgs() << "\t\trewrite to:\t" << *mi);
}
+ // Rewrite INSERT_SUBREG as COPY now that we no longer need SSA form.
+ if (mi->isInsertSubreg()) {
+ // From %reg = INSERT_SUBREG %reg, %subreg, subidx
+ // To %reg:subidx = COPY %subreg
+ unsigned SubIdx = mi->getOperand(3).getImm();
+ mi->RemoveOperand(3);
+ assert(mi->getOperand(0).getSubReg() == 0 && "Unexpected subreg idx");
+ mi->getOperand(0).setSubReg(SubIdx);
+ mi->RemoveOperand(1);
+ mi->setDesc(TII->get(TargetOpcode::COPY));
+ DEBUG(dbgs() << "\t\tconvert to:\t" << *mi);
+ }
+
// Clear TiedOperands here instead of at the top of the loop
// since most instructions do not have tied operands.
TiedOperands.clear();
}
static void UpdateRegSequenceSrcs(unsigned SrcReg,
- unsigned DstReg, unsigned SrcIdx,
- MachineRegisterInfo *MRI) {
+ unsigned DstReg, unsigned SubIdx,
+ MachineRegisterInfo *MRI,
+ const TargetRegisterInfo &TRI) {
for (MachineRegisterInfo::reg_iterator RI = MRI->reg_begin(SrcReg),
RE = MRI->reg_end(); RI != RE; ) {
MachineOperand &MO = RI.getOperand();
++RI;
- MO.setReg(DstReg);
- assert(MO.getSubReg() == 0);
- MO.setSubReg(SrcIdx);
+ MO.substVirtReg(DstReg, SubIdx, TRI);
}
}
+/// CoalesceExtSubRegs - If a number of sources of the REG_SEQUENCE are
+/// EXTRACT_SUBREG from the same register and to the same virtual register
+/// with different sub-register indices, attempt to combine the
+/// EXTRACT_SUBREGs and pre-coalesce them. e.g.
+/// %reg1026<def> = VLDMQ %reg1025<kill>, 260, pred:14, pred:%reg0
+/// %reg1029:6<def> = EXTRACT_SUBREG %reg1026, 6
+/// %reg1029:5<def> = EXTRACT_SUBREG %reg1026<kill>, 5
+/// Since D subregs 5, 6 can combine to a Q register, we can coalesce
+/// reg1026 to reg1029.
+void
+TwoAddressInstructionPass::CoalesceExtSubRegs(SmallVector<unsigned,4> &Srcs,
+ unsigned DstReg) {
+ SmallSet<unsigned, 4> Seen;
+ for (unsigned i = 0, e = Srcs.size(); i != e; ++i) {
+ unsigned SrcReg = Srcs[i];
+ if (!Seen.insert(SrcReg))
+ continue;
+
+ // Check that the instructions are all in the same basic block.
+ MachineInstr *SrcDefMI = MRI->getVRegDef(SrcReg);
+ MachineInstr *DstDefMI = MRI->getVRegDef(DstReg);
+ if (SrcDefMI->getParent() != DstDefMI->getParent())
+ continue;
+
+ // If there are no other uses than copies which feed into
+ // the reg_sequence, then we might be able to coalesce them.
+ bool CanCoalesce = true;
+ SmallVector<unsigned, 4> SrcSubIndices, DstSubIndices;
+ for (MachineRegisterInfo::use_nodbg_iterator
+ UI = MRI->use_nodbg_begin(SrcReg),
+ UE = MRI->use_nodbg_end(); UI != UE; ++UI) {
+ MachineInstr *UseMI = &*UI;
+ if (!UseMI->isCopy() || UseMI->getOperand(0).getReg() != DstReg) {
+ CanCoalesce = false;
+ break;
+ }
+ SrcSubIndices.push_back(UseMI->getOperand(1).getSubReg());
+ DstSubIndices.push_back(UseMI->getOperand(0).getSubReg());
+ }
+
+ if (!CanCoalesce || SrcSubIndices.size() < 2)
+ continue;
+
+ // Check that the source subregisters can be combined.
+ std::sort(SrcSubIndices.begin(), SrcSubIndices.end());
+ unsigned NewSrcSubIdx = 0;
+ if (!TRI->canCombineSubRegIndices(MRI->getRegClass(SrcReg), SrcSubIndices,
+ NewSrcSubIdx))
+ continue;
+
+ // Check that the destination subregisters can also be combined.
+ std::sort(DstSubIndices.begin(), DstSubIndices.end());
+ unsigned NewDstSubIdx = 0;
+ if (!TRI->canCombineSubRegIndices(MRI->getRegClass(DstReg), DstSubIndices,
+ NewDstSubIdx))
+ continue;
+
+ // If neither source nor destination can be combined to the full register,
+ // just give up. This could be improved if it ever matters.
+ if (NewSrcSubIdx != 0 && NewDstSubIdx != 0)
+ continue;
+
+ // Now that we know that all the uses are extract_subregs and that those
+ // subregs can somehow be combined, scan all the extract_subregs again to
+ // make sure the subregs are in the right order and can be composed.
+ MachineInstr *SomeMI = 0;
+ CanCoalesce = true;
+ for (MachineRegisterInfo::use_nodbg_iterator
+ UI = MRI->use_nodbg_begin(SrcReg),
+ UE = MRI->use_nodbg_end(); UI != UE; ++UI) {
+ MachineInstr *UseMI = &*UI;
+ assert(UseMI->isCopy());
+ unsigned DstSubIdx = UseMI->getOperand(0).getSubReg();
+ unsigned SrcSubIdx = UseMI->getOperand(1).getSubReg();
+ assert(DstSubIdx != 0 && "missing subreg from RegSequence elimination");
+ if ((NewDstSubIdx == 0 &&
+ TRI->composeSubRegIndices(NewSrcSubIdx, DstSubIdx) != SrcSubIdx) ||
+ (NewSrcSubIdx == 0 &&
+ TRI->composeSubRegIndices(NewDstSubIdx, SrcSubIdx) != DstSubIdx)) {
+ CanCoalesce = false;
+ break;
+ }
+ // Keep track of one of the uses.
+ SomeMI = UseMI;
+ }
+ if (!CanCoalesce)
+ continue;
+
+ // Insert a copy to replace the original.
+ MachineInstr *CopyMI = BuildMI(*SomeMI->getParent(), SomeMI,
+ SomeMI->getDebugLoc(),
+ TII->get(TargetOpcode::COPY))
+ .addReg(DstReg, RegState::Define, NewDstSubIdx)
+ .addReg(SrcReg, 0, NewSrcSubIdx);
+
+ // Remove all the old extract instructions.
+ for (MachineRegisterInfo::use_nodbg_iterator
+ UI = MRI->use_nodbg_begin(SrcReg),
+ UE = MRI->use_nodbg_end(); UI != UE; ) {
+ MachineInstr *UseMI = &*UI;
+ ++UI;
+ if (UseMI == CopyMI)
+ continue;
+ assert(UseMI->isCopy());
+ // Move any kills to the new copy or extract instruction.
+ if (UseMI->getOperand(1).isKill()) {
+ CopyMI->getOperand(1).setIsKill();
+ if (LV)
+ // Update live variables
+ LV->replaceKillInstruction(SrcReg, UseMI, &*CopyMI);
+ }
+ UseMI->eraseFromParent();
+ }
+ }
+}
+
+static bool HasOtherRegSequenceUses(unsigned Reg, MachineInstr *RegSeq,
+ MachineRegisterInfo *MRI) {
+ for (MachineRegisterInfo::use_iterator UI = MRI->use_begin(Reg),
+ UE = MRI->use_end(); UI != UE; ++UI) {
+ MachineInstr *UseMI = &*UI;
+ if (UseMI != RegSeq && UseMI->isRegSequence())
+ return true;
+ }
+ return false;
+}
+
/// EliminateRegSequences - Eliminate REG_SEQUENCE instructions as part
/// of the de-ssa process. This replaces sources of REG_SEQUENCE as
/// sub-register references of the register defined by REG_SEQUENCE. e.g.
llvm_unreachable(0);
}
+ bool IsImpDef = true;
SmallVector<unsigned, 4> RealSrcs;
SmallSet<unsigned, 4> Seen;
for (unsigned i = 1, e = MI->getNumOperands(); i < e; i += 2) {
unsigned SrcReg = MI->getOperand(i).getReg();
+ unsigned SubIdx = MI->getOperand(i+1).getImm();
if (MI->getOperand(i).getSubReg() ||
TargetRegisterInfo::isPhysicalRegister(SrcReg)) {
DEBUG(dbgs() << "Illegal REG_SEQUENCE instruction:" << *MI);
DefMI->eraseFromParent();
continue;
}
+ IsImpDef = false;
- // Remember EXTRACT_SUBREG sources. These might be candidate for
- // coalescing.
- if (DefMI->isExtractSubreg())
+ // Remember COPY sources. These might be candidate for coalescing.
+ if (DefMI->isCopy() && DefMI->getOperand(1).getSubReg())
RealSrcs.push_back(DefMI->getOperand(1).getReg());
- if (!Seen.insert(SrcReg) || MI->getParent() != DefMI->getParent()) {
+ bool isKill = MI->getOperand(i).isKill();
+ if (!Seen.insert(SrcReg) || MI->getParent() != DefMI->getParent() ||
+ !isKill || HasOtherRegSequenceUses(SrcReg, MI, MRI) ||
+ !TRI->getMatchingSuperRegClass(MRI->getRegClass(DstReg),
+ MRI->getRegClass(SrcReg), SubIdx)) {
// REG_SEQUENCE cannot have duplicated operands, add a copy.
- // Also add an copy if the source if live-in the block. We don't want
+ // Also add an copy if the source is live-in the block. We don't want
// to end up with a partial-redef of a livein, e.g.
// BB0:
// reg1051:10<def> =
// BB2:
// reg1051:9<def> =
// LiveIntervalAnalysis won't like it.
- const TargetRegisterClass *RC = MRI->getRegClass(SrcReg);
- unsigned NewReg = MRI->createVirtualRegister(RC);
+ //
+ // If the REG_SEQUENCE doesn't kill its source, keeping live variables
+ // correctly up to date becomes very difficult. Insert a copy.
+
+ // Defer any kill flag to the last operand using SrcReg. Otherwise, we
+ // might insert a COPY that uses SrcReg after is was killed.
+ if (isKill)
+ for (unsigned j = i + 2; j < e; j += 2)
+ if (MI->getOperand(j).getReg() == SrcReg) {
+ MI->getOperand(j).setIsKill();
+ isKill = false;
+ break;
+ }
+
MachineBasicBlock::iterator InsertLoc = MI;
- bool Emitted =
- TII->copyRegToReg(*MI->getParent(), InsertLoc, NewReg, SrcReg, RC, RC,
- MI->getDebugLoc());
- (void)Emitted;
- assert(Emitted && "Unable to issue a copy instruction!\n");
- MI->getOperand(i).setReg(NewReg);
- if (MI->getOperand(i).isKill()) {
- MachineBasicBlock::iterator CopyMI = prior(InsertLoc);
- MachineOperand *KillMO = CopyMI->findRegisterUseOperand(SrcReg);
- KillMO->setIsKill();
- if (LV)
- // Update live variables
- LV->replaceKillInstruction(SrcReg, MI, &*CopyMI);
- }
+ MachineInstr *CopyMI = BuildMI(*MI->getParent(), InsertLoc,
+ MI->getDebugLoc(), TII->get(TargetOpcode::COPY))
+ .addReg(DstReg, RegState::Define, SubIdx)
+ .addReg(SrcReg, getKillRegState(isKill));
+ MI->getOperand(i).setReg(0);
+ if (LV && isKill)
+ LV->replaceKillInstruction(SrcReg, MI, CopyMI);
+ DEBUG(dbgs() << "Inserted: " << *CopyMI);
}
}
for (unsigned i = 1, e = MI->getNumOperands(); i < e; i += 2) {
unsigned SrcReg = MI->getOperand(i).getReg();
- unsigned SrcIdx = MI->getOperand(i+1).getImm();
- UpdateRegSequenceSrcs(SrcReg, DstReg, SrcIdx, MRI);
+ if (!SrcReg) continue;
+ unsigned SubIdx = MI->getOperand(i+1).getImm();
+ UpdateRegSequenceSrcs(SrcReg, DstReg, SubIdx, MRI, *TRI);
}
- DEBUG(dbgs() << "Eliminated: " << *MI);
- MI->eraseFromParent();
-
- // Try coalescing some EXTRACT_SUBREG instructions.
- Seen.clear();
- for (unsigned i = 0, e = RealSrcs.size(); i != e; ++i) {
- unsigned SrcReg = RealSrcs[i];
- if (!Seen.insert(SrcReg))
- continue;
-
- // If there are no other uses than extract_subreg which feed into
- // the reg_sequence, then we might be able to coalesce them.
- bool CanCoalesce = true;
- SmallVector<unsigned, 4> SubIndices;
- for (MachineRegisterInfo::use_nodbg_iterator
- UI = MRI->use_nodbg_begin(SrcReg),
- UE = MRI->use_nodbg_end(); UI != UE; ++UI) {
- MachineInstr *UseMI = &*UI;
- if (!UseMI->isExtractSubreg() ||
- UseMI->getOperand(0).getReg() != DstReg) {
- CanCoalesce = false;
- break;
- }
- SubIndices.push_back(UseMI->getOperand(2).getImm());
- }
-
- if (!CanCoalesce)
- continue;
-
- // %reg1026<def> = VLDMQ %reg1025<kill>, 260, pred:14, pred:%reg0
- // %reg1029:6<def> = EXTRACT_SUBREG %reg1026, 6
- // %reg1029:5<def> = EXTRACT_SUBREG %reg1026<kill>, 5
- // Since D subregs 5, 6 can combine to a Q register, we can coalesce
- // reg1026 to reg1029.
- std::sort(SubIndices.begin(), SubIndices.end());
- unsigned NewSubIdx = 0;
- if (TRI->canCombinedSubRegIndex(MRI->getRegClass(SrcReg), SubIndices,
- NewSubIdx))
- UpdateRegSequenceSrcs(SrcReg, DstReg, NewSubIdx, MRI);
+ if (IsImpDef) {
+ DEBUG(dbgs() << "Turned: " << *MI << " into an IMPLICIT_DEF");
+ MI->setDesc(TII->get(TargetOpcode::IMPLICIT_DEF));
+ for (int j = MI->getNumOperands() - 1, ee = 0; j > ee; --j)
+ MI->RemoveOperand(j);
+ } else {
+ DEBUG(dbgs() << "Eliminated: " << *MI);
+ MI->eraseFromParent();
}
+
+ // Try coalescing some EXTRACT_SUBREG instructions. This can create
+ // INSERT_SUBREG instructions that must have <undef> flags added by
+ // LiveIntervalAnalysis, so only run it when LiveVariables is available.
+ if (LV)
+ CoalesceExtSubRegs(RealSrcs, DstReg);
}
RegSequences.clear();
projects / oota-llvm.git / blobdiff