#include "llvm/Support/CommandLine.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/raw_ostream.h"
+#include "llvm/Target/TargetFrameLowering.h"
#include "llvm/Target/TargetLowering.h"
#include "llvm/Target/TargetMachine.h"
#include "llvm/Target/TargetRegisterInfo.h"
unsigned SubReg2 = MI->getOperand(Idx2).getSubReg();
bool Reg1IsKill = MI->getOperand(Idx1).isKill();
bool Reg2IsKill = MI->getOperand(Idx2).isKill();
+ bool Reg1IsUndef = MI->getOperand(Idx1).isUndef();
+ bool Reg2IsUndef = MI->getOperand(Idx2).isUndef();
+ bool Reg1IsInternal = MI->getOperand(Idx1).isInternalRead();
+ bool Reg2IsInternal = MI->getOperand(Idx2).isInternalRead();
// If destination is tied to either of the commuted source register, then
// it must be updated.
if (HasDef && Reg0 == Reg1 &&
MI->getOperand(Idx1).setSubReg(SubReg2);
MI->getOperand(Idx2).setIsKill(Reg1IsKill);
MI->getOperand(Idx1).setIsKill(Reg2IsKill);
+ MI->getOperand(Idx2).setIsUndef(Reg1IsUndef);
+ MI->getOperand(Idx1).setIsUndef(Reg2IsUndef);
+ MI->getOperand(Idx2).setIsInternalRead(Reg1IsInternal);
+ MI->getOperand(Idx1).setIsInternalRead(Reg2IsInternal);
return MI;
}
bool TargetInstrInfo::getStackSlotRange(const TargetRegisterClass *RC,
unsigned SubIdx, unsigned &Size,
unsigned &Offset,
- const TargetMachine *TM) const {
+ const MachineFunction &MF) const {
if (!SubIdx) {
Size = RC->getSize();
Offset = 0;
return true;
}
- unsigned BitSize = TM->getRegisterInfo()->getSubRegIdxSize(SubIdx);
+ const TargetRegisterInfo *TRI = MF.getSubtarget().getRegisterInfo();
+ unsigned BitSize = TRI->getSubRegIdxSize(SubIdx);
// Convert bit size to byte size to be consistent with
// MCRegisterClass::getSize().
if (BitSize % 8)
return false;
- int BitOffset = TM->getRegisterInfo()->getSubRegIdxOffset(SubIdx);
+ int BitOffset = TRI->getSubRegIdxOffset(SubIdx);
if (BitOffset < 0 || BitOffset % 8)
return false;
assert(RC->getSize() >= (Offset + Size) && "bad subregister range");
- if (!TM->getDataLayout()->isLittleEndian()) {
+ if (!MF.getTarget().getDataLayout()->isLittleEndian()) {
Offset = RC->getSize() - (Offset + Size);
}
return true;
return nullptr;
}
-bool TargetInstrInfo::
-canFoldMemoryOperand(const MachineInstr *MI,
- const SmallVectorImpl<unsigned> &Ops) const {
+void TargetInstrInfo::getNoopForMachoTarget(MCInst &NopInst) const {
+ llvm_unreachable("Not a MachO target");
+}
+
+bool TargetInstrInfo::canFoldMemoryOperand(const MachineInstr *MI,
+ ArrayRef<unsigned> Ops) const {
return MI->isCopy() && Ops.size() == 1 && canFoldCopy(MI, Ops[0]);
}
-static MachineInstr* foldPatchpoint(MachineFunction &MF,
- MachineInstr *MI,
- const SmallVectorImpl<unsigned> &Ops,
- int FrameIndex,
+static MachineInstr *foldPatchpoint(MachineFunction &MF, MachineInstr *MI,
+ ArrayRef<unsigned> Ops, int FrameIndex,
const TargetInstrInfo &TII) {
unsigned StartIdx = 0;
switch (MI->getOpcode()) {
// Return false if any operands requested for folding are not foldable (not
// part of the stackmap's live values).
- for (SmallVectorImpl<unsigned>::const_iterator I = Ops.begin(), E = Ops.end();
- I != E; ++I) {
- if (*I < StartIdx)
+ for (unsigned Op : Ops) {
+ if (Op < StartIdx)
return nullptr;
}
// Compute the spill slot size and offset.
const TargetRegisterClass *RC =
MF.getRegInfo().getRegClass(MO.getReg());
- bool Valid = TII.getStackSlotRange(RC, MO.getSubReg(), SpillSize,
- SpillOffset, &MF.getTarget());
+ bool Valid =
+ TII.getStackSlotRange(RC, MO.getSubReg(), SpillSize, SpillOffset, MF);
if (!Valid)
report_fatal_error("cannot spill patchpoint subregister operand");
MIB.addImm(StackMaps::IndirectMemRefOp);
/// operand folded, otherwise NULL is returned. The client is responsible for
/// removing the old instruction and adding the new one in the instruction
/// stream.
-MachineInstr*
-TargetInstrInfo::foldMemoryOperand(MachineBasicBlock::iterator MI,
- const SmallVectorImpl<unsigned> &Ops,
- int FI) const {
+MachineInstr *TargetInstrInfo::foldMemoryOperand(MachineBasicBlock::iterator MI,
+ ArrayRef<unsigned> Ops,
+ int FI) const {
unsigned Flags = 0;
for (unsigned i = 0, e = Ops.size(); i != e; ++i)
if (MI->getOperand(Ops[i]).isDef())
const MachineOperand &MO = MI->getOperand(1-Ops[0]);
MachineBasicBlock::iterator Pos = MI;
- const TargetRegisterInfo *TRI = MF.getTarget().getRegisterInfo();
+ const TargetRegisterInfo *TRI = MF.getSubtarget().getRegisterInfo();
if (Flags == MachineMemOperand::MOStore)
storeRegToStackSlot(*MBB, Pos, MO.getReg(), MO.isKill(), FI, RC, TRI);
/// foldMemoryOperand - Same as the previous version except it allows folding
/// of any load and store from / to any address, not just from a specific
/// stack slot.
-MachineInstr*
-TargetInstrInfo::foldMemoryOperand(MachineBasicBlock::iterator MI,
- const SmallVectorImpl<unsigned> &Ops,
- MachineInstr* LoadMI) const {
+MachineInstr *TargetInstrInfo::foldMemoryOperand(MachineBasicBlock::iterator MI,
+ ArrayRef<unsigned> Ops,
+ MachineInstr *LoadMI) const {
assert(LoadMI->canFoldAsLoad() && "LoadMI isn't foldable!");
#ifndef NDEBUG
for (unsigned i = 0, e = Ops.size(); i != e; ++i)
return true;
}
+int TargetInstrInfo::getSPAdjust(const MachineInstr *MI) const {
+ const MachineFunction *MF = MI->getParent()->getParent();
+ const TargetFrameLowering *TFI = MF->getSubtarget().getFrameLowering();
+ bool StackGrowsDown =
+ TFI->getStackGrowthDirection() == TargetFrameLowering::StackGrowsDown;
+
+ unsigned FrameSetupOpcode = getCallFrameSetupOpcode();
+ unsigned FrameDestroyOpcode = getCallFrameDestroyOpcode();
+
+ if (MI->getOpcode() != FrameSetupOpcode &&
+ MI->getOpcode() != FrameDestroyOpcode)
+ return 0;
+
+ int SPAdj = MI->getOperand(0).getImm();
+
+ if ((!StackGrowsDown && MI->getOpcode() == FrameSetupOpcode) ||
+ (StackGrowsDown && MI->getOpcode() == FrameDestroyOpcode))
+ SPAdj = -SPAdj;
+
+ return SPAdj;
+}
+
/// isSchedulingBoundary - Test if the given instruction should be
/// considered a scheduling boundary. This primarily includes labels
/// and terminators.
// saves compile time, because it doesn't require every single
// stack slot reference to depend on the instruction that does the
// modification.
- const TargetLowering &TLI = *MF.getTarget().getTargetLowering();
- const TargetRegisterInfo *TRI = MF.getTarget().getRegisterInfo();
+ const TargetLowering &TLI = *MF.getSubtarget().getTargetLowering();
+ const TargetRegisterInfo *TRI = MF.getSubtarget().getRegisterInfo();
if (MI->modifiesRegister(TLI.getStackPointerRegisterToSaveRestore(), TRI))
return true;
}
/// Return the default expected latency for a def based on it's opcode.
-unsigned TargetInstrInfo::defaultDefLatency(const MCSchedModel *SchedModel,
+unsigned TargetInstrInfo::defaultDefLatency(const MCSchedModel &SchedModel,
const MachineInstr *DefMI) const {
if (DefMI->isTransient())
return 0;
if (DefMI->mayLoad())
- return SchedModel->LoadLatency;
+ return SchedModel.LoadLatency;
if (isHighLatencyDef(DefMI->getOpcode()))
- return SchedModel->HighLatency;
+ return SchedModel.HighLatency;
return 1;
}
defaultDefLatency(ItinData->SchedModel, DefMI));
return InstrLatency;
}
+
+bool TargetInstrInfo::getRegSequenceInputs(
+ const MachineInstr &MI, unsigned DefIdx,
+ SmallVectorImpl<RegSubRegPairAndIdx> &InputRegs) const {
+ assert((MI.isRegSequence() ||
+ MI.isRegSequenceLike()) && "Instruction do not have the proper type");
+
+ if (!MI.isRegSequence())
+ return getRegSequenceLikeInputs(MI, DefIdx, InputRegs);
+
+ // We are looking at:
+ // Def = REG_SEQUENCE v0, sub0, v1, sub1, ...
+ assert(DefIdx == 0 && "REG_SEQUENCE only has one def");
+ for (unsigned OpIdx = 1, EndOpIdx = MI.getNumOperands(); OpIdx != EndOpIdx;
+ OpIdx += 2) {
+ const MachineOperand &MOReg = MI.getOperand(OpIdx);
+ const MachineOperand &MOSubIdx = MI.getOperand(OpIdx + 1);
+ assert(MOSubIdx.isImm() &&
+ "One of the subindex of the reg_sequence is not an immediate");
+ // Record Reg:SubReg, SubIdx.
+ InputRegs.push_back(RegSubRegPairAndIdx(MOReg.getReg(), MOReg.getSubReg(),
+ (unsigned)MOSubIdx.getImm()));
+ }
+ return true;
+}
+
+bool TargetInstrInfo::getExtractSubregInputs(
+ const MachineInstr &MI, unsigned DefIdx,
+ RegSubRegPairAndIdx &InputReg) const {
+ assert((MI.isExtractSubreg() ||
+ MI.isExtractSubregLike()) && "Instruction do not have the proper type");
+
+ if (!MI.isExtractSubreg())
+ return getExtractSubregLikeInputs(MI, DefIdx, InputReg);
+
+ // We are looking at:
+ // Def = EXTRACT_SUBREG v0.sub1, sub0.
+ assert(DefIdx == 0 && "EXTRACT_SUBREG only has one def");
+ const MachineOperand &MOReg = MI.getOperand(1);
+ const MachineOperand &MOSubIdx = MI.getOperand(2);
+ assert(MOSubIdx.isImm() &&
+ "The subindex of the extract_subreg is not an immediate");
+
+ InputReg.Reg = MOReg.getReg();
+ InputReg.SubReg = MOReg.getSubReg();
+ InputReg.SubIdx = (unsigned)MOSubIdx.getImm();
+ return true;
+}
+
+bool TargetInstrInfo::getInsertSubregInputs(
+ const MachineInstr &MI, unsigned DefIdx,
+ RegSubRegPair &BaseReg, RegSubRegPairAndIdx &InsertedReg) const {
+ assert((MI.isInsertSubreg() ||
+ MI.isInsertSubregLike()) && "Instruction do not have the proper type");
+
+ if (!MI.isInsertSubreg())
+ return getInsertSubregLikeInputs(MI, DefIdx, BaseReg, InsertedReg);
+
+ // We are looking at:
+ // Def = INSERT_SEQUENCE v0, v1, sub0.
+ assert(DefIdx == 0 && "INSERT_SUBREG only has one def");
+ const MachineOperand &MOBaseReg = MI.getOperand(1);
+ const MachineOperand &MOInsertedReg = MI.getOperand(2);
+ const MachineOperand &MOSubIdx = MI.getOperand(3);
+ assert(MOSubIdx.isImm() &&
+ "One of the subindex of the reg_sequence is not an immediate");
+ BaseReg.Reg = MOBaseReg.getReg();
+ BaseReg.SubReg = MOBaseReg.getSubReg();
+
+ InsertedReg.Reg = MOInsertedReg.getReg();
+ InsertedReg.SubReg = MOInsertedReg.getSubReg();
+ InsertedReg.SubIdx = (unsigned)MOSubIdx.getImm();
+ return true;
+}
projects / oota-llvm.git / blobdiff