#include "llvm/Target/TargetRegisterInfo.h"
#include "llvm/Target/TargetData.h"
#include "llvm/Target/TargetLowering.h"
+#include "llvm/Target/TargetOptions.h"
#include "llvm/Target/TargetInstrInfo.h"
#include "llvm/Target/TargetMachine.h"
#include "llvm/Support/CommandLine.h"
unsigned OldG = (Operation >> 1) & 1;
return ISD::CondCode((Operation & ~6) | // Keep the N, U, E bits
(OldL << 1) | // New G bit
- (OldG << 2)); // New L bit.
+ (OldG << 2)); // New L bit.
}
/// getSetCCInverse - Return the operation corresponding to !(X op Y), where
Operation ^= 7; // Flip L, G, E bits, but not U.
else
Operation ^= 15; // Flip all of the condition bits.
+
if (Operation > ISD::SETTRUE2)
- Operation &= ~8; // Don't let N and U bits get set.
+ Operation &= ~8; // Don't let N and U bits get set.
+
return ISD::CondCode(Operation);
}
static void AddNodeIDOperands(FoldingSetNodeID &ID,
const SDUse *Ops, unsigned NumOps) {
for (; NumOps; --NumOps, ++Ops) {
- ID.AddPointer(Ops->getVal());
- ID.AddInteger(Ops->getSDValue().getResNo());
+ ID.AddPointer(Ops->getNode());
+ ID.AddInteger(Ops->getResNo());
}
}
AddNodeIDOperands(ID, OpList, N);
}
-
-/// AddNodeIDNode - Generic routine for adding a nodes info to the NodeID
-/// data.
-static void AddNodeIDNode(FoldingSetNodeID &ID, const SDNode *N) {
- AddNodeIDOpcode(ID, N->getOpcode());
- // Add the return value info.
- AddNodeIDValueTypes(ID, N->getVTList());
- // Add the operand info.
- AddNodeIDOperands(ID, N->op_begin(), N->getNumOperands());
-
- // Handle SDNode leafs with special info.
+/// AddNodeIDCustom - If this is an SDNode with special info, add this info to
+/// the NodeID data.
+static void AddNodeIDCustom(FoldingSetNodeID &ID, const SDNode *N) {
switch (N->getOpcode()) {
default: break; // Normal nodes don't need extra info.
case ISD::ARG_FLAGS:
ID.AddInteger(ST->getRawFlags());
break;
}
- case ISD::ATOMIC_CMP_SWAP_8:
- case ISD::ATOMIC_SWAP_8:
- case ISD::ATOMIC_LOAD_ADD_8:
- case ISD::ATOMIC_LOAD_SUB_8:
- case ISD::ATOMIC_LOAD_AND_8:
- case ISD::ATOMIC_LOAD_OR_8:
- case ISD::ATOMIC_LOAD_XOR_8:
- case ISD::ATOMIC_LOAD_NAND_8:
- case ISD::ATOMIC_LOAD_MIN_8:
- case ISD::ATOMIC_LOAD_MAX_8:
- case ISD::ATOMIC_LOAD_UMIN_8:
- case ISD::ATOMIC_LOAD_UMAX_8:
- case ISD::ATOMIC_CMP_SWAP_16:
- case ISD::ATOMIC_SWAP_16:
- case ISD::ATOMIC_LOAD_ADD_16:
- case ISD::ATOMIC_LOAD_SUB_16:
- case ISD::ATOMIC_LOAD_AND_16:
- case ISD::ATOMIC_LOAD_OR_16:
- case ISD::ATOMIC_LOAD_XOR_16:
- case ISD::ATOMIC_LOAD_NAND_16:
- case ISD::ATOMIC_LOAD_MIN_16:
- case ISD::ATOMIC_LOAD_MAX_16:
- case ISD::ATOMIC_LOAD_UMIN_16:
- case ISD::ATOMIC_LOAD_UMAX_16:
- case ISD::ATOMIC_CMP_SWAP_32:
- case ISD::ATOMIC_SWAP_32:
- case ISD::ATOMIC_LOAD_ADD_32:
- case ISD::ATOMIC_LOAD_SUB_32:
- case ISD::ATOMIC_LOAD_AND_32:
- case ISD::ATOMIC_LOAD_OR_32:
- case ISD::ATOMIC_LOAD_XOR_32:
- case ISD::ATOMIC_LOAD_NAND_32:
- case ISD::ATOMIC_LOAD_MIN_32:
- case ISD::ATOMIC_LOAD_MAX_32:
- case ISD::ATOMIC_LOAD_UMIN_32:
- case ISD::ATOMIC_LOAD_UMAX_32:
- case ISD::ATOMIC_CMP_SWAP_64:
- case ISD::ATOMIC_SWAP_64:
- case ISD::ATOMIC_LOAD_ADD_64:
- case ISD::ATOMIC_LOAD_SUB_64:
- case ISD::ATOMIC_LOAD_AND_64:
- case ISD::ATOMIC_LOAD_OR_64:
- case ISD::ATOMIC_LOAD_XOR_64:
- case ISD::ATOMIC_LOAD_NAND_64:
- case ISD::ATOMIC_LOAD_MIN_64:
- case ISD::ATOMIC_LOAD_MAX_64:
- case ISD::ATOMIC_LOAD_UMIN_64:
- case ISD::ATOMIC_LOAD_UMAX_64: {
+ case ISD::ATOMIC_CMP_SWAP:
+ case ISD::ATOMIC_SWAP:
+ case ISD::ATOMIC_LOAD_ADD:
+ case ISD::ATOMIC_LOAD_SUB:
+ case ISD::ATOMIC_LOAD_AND:
+ case ISD::ATOMIC_LOAD_OR:
+ case ISD::ATOMIC_LOAD_XOR:
+ case ISD::ATOMIC_LOAD_NAND:
+ case ISD::ATOMIC_LOAD_MIN:
+ case ISD::ATOMIC_LOAD_MAX:
+ case ISD::ATOMIC_LOAD_UMIN:
+ case ISD::ATOMIC_LOAD_UMAX: {
const AtomicSDNode *AT = cast<AtomicSDNode>(N);
ID.AddInteger(AT->getRawFlags());
break;
} // end switch (N->getOpcode())
}
+/// AddNodeIDNode - Generic routine for adding a nodes info to the NodeID
+/// data.
+static void AddNodeIDNode(FoldingSetNodeID &ID, const SDNode *N) {
+ AddNodeIDOpcode(ID, N->getOpcode());
+ // Add the return value info.
+ AddNodeIDValueTypes(ID, N->getVTList());
+ // Add the operand info.
+ AddNodeIDOperands(ID, N->op_begin(), N->getNumOperands());
+
+ // Handle SDNode leafs with special info.
+ AddNodeIDCustom(ID, N);
+}
+
/// encodeMemSDNodeFlags - Generic routine for computing a value for use in
/// the CSE map that carries both alignment and volatility information.
///
-static unsigned encodeMemSDNodeFlags(bool isVolatile, unsigned Alignment) {
+static inline unsigned
+encodeMemSDNodeFlags(bool isVolatile, unsigned Alignment) {
return isVolatile | ((Log2_32(Alignment) + 1) << 1);
}
// SelectionDAG Class
//===----------------------------------------------------------------------===//
+/// doNotCSE - Return true if CSE should not be performed for this node.
+static bool doNotCSE(SDNode *N) {
+ if (N->getValueType(0) == MVT::Flag)
+ return true; // Never CSE anything that produces a flag.
+
+ switch (N->getOpcode()) {
+ default: break;
+ case ISD::HANDLENODE:
+ case ISD::DBG_LABEL:
+ case ISD::DBG_STOPPOINT:
+ case ISD::EH_LABEL:
+ case ISD::DECLARE:
+ return true; // Never CSE these nodes.
+ }
+
+ // Check that remaining values produced are not flags.
+ for (unsigned i = 1, e = N->getNumValues(); i != e; ++i)
+ if (N->getValueType(i) == MVT::Flag)
+ return true; // Never CSE anything that produces a flag.
+
+ return false;
+}
+
/// RemoveDeadNodes - This method deletes all unreachable nodes in the
/// SelectionDAG.
void SelectionDAG::RemoveDeadNodes() {
// Process the worklist, deleting the nodes and adding their uses to the
// worklist.
while (!DeadNodes.empty()) {
- SDNode *N = DeadNodes.back();
- DeadNodes.pop_back();
+ SDNode *N = DeadNodes.pop_back_val();
if (UpdateListener)
UpdateListener->NodeDeleted(N, 0);
// Next, brutally remove the operand list. This is safe to do, as there are
// no cycles in the graph.
- for (SDNode::op_iterator I = N->op_begin(), E = N->op_end(); I != E; ++I) {
- SDNode *Operand = I->getVal();
- Operand->removeUser(std::distance(N->op_begin(), I), N);
-
+ for (SDNode::op_iterator I = N->op_begin(), E = N->op_end(); I != E; ) {
+ SDUse &Use = *I++;
+ SDNode *Operand = Use.getNode();
+ Use.set(SDValue());
+
// Now that we removed this operand, see if there are no uses of it left.
if (Operand->use_empty())
DeadNodes.push_back(Operand);
}
- if (N->OperandsNeedDelete) {
- delete[] N->OperandList;
- }
- N->OperandList = 0;
- N->NumOperands = 0;
-
- // Finally, remove N itself.
- NodeAllocator.Deallocate(AllNodes.remove(N));
+
+ DeallocateNode(N);
}
}
}
void SelectionDAG::DeleteNode(SDNode *N) {
- assert(N->use_empty() && "Cannot delete a node that is not dead!");
-
// First take this out of the appropriate CSE map.
RemoveNodeFromCSEMaps(N);
}
void SelectionDAG::DeleteNodeNotInCSEMaps(SDNode *N) {
+ assert(N != AllNodes.begin() && "Cannot delete the entry node!");
+ assert(N->use_empty() && "Cannot delete a node that is not dead!");
// Drop all of the operands and decrement used node's use counts.
- for (SDNode::op_iterator I = N->op_begin(), E = N->op_end(); I != E; ++I)
- I->getVal()->removeUser(std::distance(N->op_begin(), I), N);
+ N->DropOperands();
+
+ DeallocateNode(N);
+}
+
+void SelectionDAG::DeallocateNode(SDNode *N) {
if (N->OperandsNeedDelete)
delete[] N->OperandList;
- assert(N != AllNodes.begin());
+ // Set the opcode to DELETED_NODE to help catch bugs when node
+ // memory is reallocated.
+ N->NodeType = ISD::DELETED_NODE;
+
NodeAllocator.Deallocate(AllNodes.remove(N));
}
// flag result (which cannot be CSE'd) or is one of the special cases that are
// not subject to CSE.
if (!Erased && N->getValueType(N->getNumValues()-1) != MVT::Flag &&
- !N->isMachineOpcode() &&
- N->getOpcode() != ISD::DBG_LABEL &&
- N->getOpcode() != ISD::DBG_STOPPOINT &&
- N->getOpcode() != ISD::EH_LABEL &&
- N->getOpcode() != ISD::DECLARE) {
+ !N->isMachineOpcode() && !doNotCSE(N)) {
N->dump(this);
cerr << "\n";
assert(0 && "Node is not in map!");
return Erased;
}
-/// AddNonLeafNodeToCSEMaps - Add the specified node back to the CSE maps. It
-/// has been taken out and modified in some way. If the specified node already
-/// exists in the CSE maps, do not modify the maps, but return the existing node
-/// instead. If it doesn't exist, add it and return null.
+/// AddModifiedNodeToCSEMaps - The specified node has been removed from the CSE
+/// maps and modified in place. Add it back to the CSE maps, unless an identical
+/// node already exists, in which case transfer all its users to the existing
+/// node. This transfer can potentially trigger recursive merging.
///
-SDNode *SelectionDAG::AddNonLeafNodeToCSEMaps(SDNode *N) {
- assert(N->getNumOperands() && "This is a leaf node!");
-
- if (N->getValueType(0) == MVT::Flag)
- return 0; // Never CSE anything that produces a flag.
-
- switch (N->getOpcode()) {
- default: break;
- case ISD::HANDLENODE:
- case ISD::DBG_LABEL:
- case ISD::DBG_STOPPOINT:
- case ISD::EH_LABEL:
- case ISD::DECLARE:
- return 0; // Never add these nodes.
+void
+SelectionDAG::AddModifiedNodeToCSEMaps(SDNode *N,
+ DAGUpdateListener *UpdateListener) {
+ // For node types that aren't CSE'd, just act as if no identical node
+ // already exists.
+ if (!doNotCSE(N)) {
+ SDNode *Existing = CSEMap.GetOrInsertNode(N);
+ if (Existing != N) {
+ // If there was already an existing matching node, use ReplaceAllUsesWith
+ // to replace the dead one with the existing one. This can cause
+ // recursive merging of other unrelated nodes down the line.
+ ReplaceAllUsesWith(N, Existing, UpdateListener);
+
+ // N is now dead. Inform the listener if it exists and delete it.
+ if (UpdateListener)
+ UpdateListener->NodeDeleted(N, Existing);
+ DeleteNodeNotInCSEMaps(N);
+ return;
+ }
}
-
- // Check that remaining values produced are not flags.
- for (unsigned i = 1, e = N->getNumValues(); i != e; ++i)
- if (N->getValueType(i) == MVT::Flag)
- return 0; // Never CSE anything that produces a flag.
-
- SDNode *New = CSEMap.GetOrInsertNode(N);
- if (New != N) return New; // Node already existed.
- return 0;
+
+ // If the node doesn't already exist, we updated it. Inform a listener if
+ // it exists.
+ if (UpdateListener)
+ UpdateListener->NodeUpdated(N);
}
/// FindModifiedNodeSlot - Find a slot for the specified node if its operands
/// node already exists with these operands, the slot will be non-null.
SDNode *SelectionDAG::FindModifiedNodeSlot(SDNode *N, SDValue Op,
void *&InsertPos) {
- if (N->getValueType(0) == MVT::Flag)
- return 0; // Never CSE anything that produces a flag.
+ if (doNotCSE(N))
+ return 0;
- switch (N->getOpcode()) {
- default: break;
- case ISD::HANDLENODE:
- case ISD::DBG_LABEL:
- case ISD::DBG_STOPPOINT:
- case ISD::EH_LABEL:
- return 0; // Never add these nodes.
- }
-
- // Check that remaining values produced are not flags.
- for (unsigned i = 1, e = N->getNumValues(); i != e; ++i)
- if (N->getValueType(i) == MVT::Flag)
- return 0; // Never CSE anything that produces a flag.
-
SDValue Ops[] = { Op };
FoldingSetNodeID ID;
AddNodeIDNode(ID, N->getOpcode(), N->getVTList(), Ops, 1);
+ AddNodeIDCustom(ID, N);
return CSEMap.FindNodeOrInsertPos(ID, InsertPos);
}
SDNode *SelectionDAG::FindModifiedNodeSlot(SDNode *N,
SDValue Op1, SDValue Op2,
void *&InsertPos) {
- if (N->getOpcode() == ISD::HANDLENODE || N->getValueType(0) == MVT::Flag)
-
- // Check that remaining values produced are not flags.
- for (unsigned i = 1, e = N->getNumValues(); i != e; ++i)
- if (N->getValueType(i) == MVT::Flag)
- return 0; // Never CSE anything that produces a flag.
-
+ if (doNotCSE(N))
+ return 0;
+
SDValue Ops[] = { Op1, Op2 };
FoldingSetNodeID ID;
AddNodeIDNode(ID, N->getOpcode(), N->getVTList(), Ops, 2);
+ AddNodeIDCustom(ID, N);
return CSEMap.FindNodeOrInsertPos(ID, InsertPos);
}
SDNode *SelectionDAG::FindModifiedNodeSlot(SDNode *N,
const SDValue *Ops,unsigned NumOps,
void *&InsertPos) {
- if (N->getValueType(0) == MVT::Flag)
- return 0; // Never CSE anything that produces a flag.
+ if (doNotCSE(N))
+ return 0;
- switch (N->getOpcode()) {
- default: break;
- case ISD::HANDLENODE:
- case ISD::DBG_LABEL:
- case ISD::DBG_STOPPOINT:
- case ISD::EH_LABEL:
- case ISD::DECLARE:
- return 0; // Never add these nodes.
- }
-
- // Check that remaining values produced are not flags.
- for (unsigned i = 1, e = N->getNumValues(); i != e; ++i)
- if (N->getValueType(i) == MVT::Flag)
- return 0; // Never CSE anything that produces a flag.
-
FoldingSetNodeID ID;
AddNodeIDNode(ID, N->getOpcode(), N->getVTList(), Ops, NumOps);
-
- if (const LoadSDNode *LD = dyn_cast<LoadSDNode>(N)) {
- ID.AddInteger(LD->getAddressingMode());
- ID.AddInteger(LD->getExtensionType());
- ID.AddInteger(LD->getMemoryVT().getRawBits());
- ID.AddInteger(LD->getRawFlags());
- } else if (const StoreSDNode *ST = dyn_cast<StoreSDNode>(N)) {
- ID.AddInteger(ST->getAddressingMode());
- ID.AddInteger(ST->isTruncatingStore());
- ID.AddInteger(ST->getMemoryVT().getRawBits());
- ID.AddInteger(ST->getRawFlags());
- }
-
+ AddNodeIDCustom(ID, N);
return CSEMap.FindNodeOrInsertPos(ID, InsertPos);
}
switch (N->getOpcode()) {
default:
break;
+ case ISD::BUILD_PAIR: {
+ MVT VT = N->getValueType(0);
+ assert(N->getNumValues() == 1 && "Too many results!");
+ assert(!VT.isVector() && (VT.isInteger() || VT.isFloatingPoint()) &&
+ "Wrong return type!");
+ assert(N->getNumOperands() == 2 && "Wrong number of operands!");
+ assert(N->getOperand(0).getValueType() == N->getOperand(1).getValueType() &&
+ "Mismatched operand types!");
+ assert(N->getOperand(0).getValueType().isInteger() == VT.isInteger() &&
+ "Wrong operand type!");
+ assert(VT.getSizeInBits() == 2 * N->getOperand(0).getValueSizeInBits() &&
+ "Wrong return type size");
+ break;
+ }
case ISD::BUILD_VECTOR: {
- assert(N->getNumValues() == 1 && "Too many results for BUILD_VECTOR!");
- assert(N->getValueType(0).isVector() && "Wrong BUILD_VECTOR return type!");
+ assert(N->getNumValues() == 1 && "Too many results!");
+ assert(N->getValueType(0).isVector() && "Wrong return type!");
assert(N->getNumOperands() == N->getValueType(0).getVectorNumElements() &&
- "Wrong number of BUILD_VECTOR operands!");
- MVT EltVT = N->getValueType(0).getVectorElementType();
- for (SDNode::op_iterator I = N->op_begin(), E = N->op_end(); I != E; ++I)
- assert(I->getSDValue().getValueType() == EltVT &&
- "Wrong BUILD_VECTOR operand type!");
+ "Wrong number of operands!");
+ // FIXME: Change vector_shuffle to a variadic node with mask elements being
+ // operands of the node. Currently the mask is a BUILD_VECTOR passed as an
+ // operand, and it is not always possible to legalize it. Turning off the
+ // following checks at least makes it possible to legalize most of the time.
+// MVT EltVT = N->getValueType(0).getVectorElementType();
+// for (SDNode::op_iterator I = N->op_begin(), E = N->op_end(); I != E; ++I)
+// assert(I->getValueType() == EltVT &&
+// "Wrong operand type!");
break;
}
}
AllNodes.push_back(&EntryNode);
}
-void SelectionDAG::init(MachineFunction &mf, MachineModuleInfo *mmi) {
+void SelectionDAG::init(MachineFunction &mf, MachineModuleInfo *mmi,
+ DwarfWriter *dw) {
MF = &mf;
MMI = mmi;
+ DW = dw;
}
SelectionDAG::~SelectionDAG() {
void SelectionDAG::allnodes_clear() {
assert(&*AllNodes.begin() == &EntryNode);
AllNodes.remove(AllNodes.begin());
- while (!AllNodes.empty()) {
- SDNode *N = AllNodes.remove(AllNodes.begin());
- N->SetNextInBucket(0);
- if (N->OperandsNeedDelete)
- delete [] N->OperandList;
- NodeAllocator.Deallocate(N);
- }
+ while (!AllNodes.empty())
+ DeallocateNode(AllNodes.begin());
}
void SelectionDAG::clear() {
std::fill(ValueTypeNodes.begin(), ValueTypeNodes.end(),
static_cast<SDNode*>(0));
- EntryNode.Uses = 0;
+ EntryNode.UseList = 0;
AllNodes.push_back(&EntryNode);
Root = getEntryNode();
}
getConstant(Imm, Op.getValueType()));
}
+SDValue SelectionDAG::getZeroExtendInReg(SDValue Op, DebugLoc DL, MVT VT) {
+ if (Op.getValueType() == VT) return Op;
+ APInt Imm = APInt::getLowBitsSet(Op.getValueSizeInBits(),
+ VT.getSizeInBits());
+ return getNode(ISD::AND, DL, Op.getValueType(), Op,
+ getConstant(Imm, Op.getValueType()));
+}
+
+/// getNOT - Create a bitwise NOT operation as (XOR Val, -1).
+///
+SDValue SelectionDAG::getNOT(DebugLoc DL, SDValue Val, MVT VT) {
+ SDValue NegOne;
+ if (VT.isVector()) {
+ MVT EltVT = VT.getVectorElementType();
+ SDValue NegOneElt = getConstant(EltVT.getIntegerVTBitMask(), EltVT);
+ std::vector<SDValue> NegOnes(VT.getVectorNumElements(), NegOneElt);
+ NegOne = getNode(ISD::BUILD_VECTOR, DebugLoc::getUnknownLoc(), VT,
+ &NegOnes[0], NegOnes.size());
+ } else {
+ NegOne = getConstant(VT.getIntegerVTBitMask(), VT);
+ }
+
+ return getNode(ISD::XOR, DL, VT, Val, NegOne);
+}
+
SDValue SelectionDAG::getConstant(uint64_t Val, MVT VT, bool isT) {
MVT EltVT = VT.isVector() ? VT.getVectorElementType() : VT;
+ assert((EltVT.getSizeInBits() >= 64 ||
+ (uint64_t)((int64_t)Val >> EltVT.getSizeInBits()) + 1 < 2) &&
+ "getConstant with a uint64_t value that doesn't fit in the type!");
return getConstant(APInt(EltVT.getSizeInBits(), Val), VT, isT);
}
}
SDValue SelectionDAG::getGlobalAddress(const GlobalValue *GV,
- MVT VT, int Offset,
+ MVT VT, int64_t Offset,
bool isTargetGA) {
unsigned Opc;
+ // Truncate (with sign-extension) the offset value to the pointer size.
+ unsigned BitWidth = TLI.getPointerTy().getSizeInBits();
+ if (BitWidth < 64)
+ Offset = (Offset << (64 - BitWidth) >> (64 - BitWidth));
+
const GlobalVariable *GVar = dyn_cast<GlobalVariable>(GV);
if (!GVar) {
// If GV is an alias then use the aliasee for determining thread-localness.
ID.AddInteger(Offset);
void *IP = 0;
if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
- return SDValue(E, 0);
+ return SDValue(E, 0);
SDNode *N = NodeAllocator.Allocate<GlobalAddressSDNode>();
new (N) GlobalAddressSDNode(isTargetGA, GV, VT, Offset);
CSEMap.InsertNode(N, IP);
return SDValue(N, 0);
}
+SDValue SelectionDAG::getBasicBlock(MachineBasicBlock *MBB, DebugLoc dl) {
+ FoldingSetNodeID ID;
+ AddNodeIDNode(ID, ISD::BasicBlock, getVTList(MVT::Other), 0, 0);
+ ID.AddPointer(MBB);
+ void *IP = 0;
+ if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
+ return SDValue(E, 0);
+ SDNode *N = NodeAllocator.Allocate<BasicBlockSDNode>();
+ new (N) BasicBlockSDNode(MBB, dl);
+ CSEMap.InsertNode(N, IP);
+ AllNodes.push_back(N);
+ return SDValue(N, 0);
+}
+
SDValue SelectionDAG::getArgFlags(ISD::ArgFlagsTy Flags) {
FoldingSetNodeID ID;
AddNodeIDNode(ID, ISD::ARG_FLAGS, getVTList(MVT::Other), 0, 0);
return SDValue(N, 0);
}
+SDValue SelectionDAG::getExternalSymbol(const char *Sym, DebugLoc dl, MVT VT) {
+ SDNode *&N = ExternalSymbols[Sym];
+ if (N) return SDValue(N, 0);
+ N = NodeAllocator.Allocate<ExternalSymbolSDNode>();
+ new (N) ExternalSymbolSDNode(false, dl, Sym, VT);
+ AllNodes.push_back(N);
+ return SDValue(N, 0);
+}
+
SDValue SelectionDAG::getTargetExternalSymbol(const char *Sym, MVT VT) {
SDNode *&N = TargetExternalSymbols[Sym];
if (N) return SDValue(N, 0);
return SDValue(N, 0);
}
+SDValue SelectionDAG::getTargetExternalSymbol(const char *Sym, DebugLoc dl,
+ MVT VT) {
+ SDNode *&N = TargetExternalSymbols[Sym];
+ if (N) return SDValue(N, 0);
+ N = NodeAllocator.Allocate<ExternalSymbolSDNode>();
+ new (N) ExternalSymbolSDNode(true, dl, Sym, VT);
+ AllNodes.push_back(N);
+ return SDValue(N, 0);
+}
+
SDValue SelectionDAG::getCondCode(ISD::CondCode Cond) {
if ((unsigned)Cond >= CondCodeNodes.size())
CondCodeNodes.resize(Cond+1);
return SDValue(CondCodeNodes[Cond], 0);
}
+SDValue SelectionDAG::getConvertRndSat(MVT VT, SDValue Val, SDValue DTy,
+ SDValue STy, SDValue Rnd, SDValue Sat,
+ ISD::CvtCode Code) {
+ // If the src and dest types are the same, no conversion is necessary.
+ if (DTy == STy)
+ return Val;
+
+ FoldingSetNodeID ID;
+ void* IP = 0;
+ if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
+ return SDValue(E, 0);
+ CvtRndSatSDNode *N = NodeAllocator.Allocate<CvtRndSatSDNode>();
+ SDValue Ops[] = { Val, DTy, STy, Rnd, Sat };
+ new (N) CvtRndSatSDNode(VT, Ops, 5, Code);
+ CSEMap.InsertNode(N, IP);
+ AllNodes.push_back(N);
+ return SDValue(N, 0);
+}
+
SDValue SelectionDAG::getRegister(unsigned RegNo, MVT VT) {
FoldingSetNodeID ID;
AddNodeIDNode(ID, ISD::Register, getVTList(VT), 0, 0);
}
SDValue SelectionDAG::getDbgStopPoint(SDValue Root,
- unsigned Line, unsigned Col,
- const CompileUnitDesc *CU) {
+ unsigned Line, unsigned Col,
+ Value *CU) {
SDNode *N = NodeAllocator.Allocate<DbgStopPointSDNode>();
new (N) DbgStopPointSDNode(Root, Line, Col, CU);
AllNodes.push_back(N);
return SDValue(N, 0);
}
+SDValue SelectionDAG::getLabel(unsigned Opcode, DebugLoc dl,
+ SDValue Root,
+ unsigned LabelID) {
+ FoldingSetNodeID ID;
+ SDValue Ops[] = { Root };
+ AddNodeIDNode(ID, Opcode, getVTList(MVT::Other), &Ops[0], 1);
+ ID.AddInteger(LabelID);
+ void *IP = 0;
+ if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
+ return SDValue(E, 0);
+ SDNode *N = NodeAllocator.Allocate<LabelSDNode>();
+ new (N) LabelSDNode(Opcode, dl, Root, LabelID);
+ CSEMap.InsertNode(N, IP);
+ AllNodes.push_back(N);
+ return SDValue(N, 0);
+}
+
SDValue SelectionDAG::getSrcValue(const Value *V) {
assert((!V || isa<PointerType>(V->getType())) &&
"SrcValue is not a pointer?");
}
SDValue SelectionDAG::getMemOperand(const MachineMemOperand &MO) {
+#ifndef NDEBUG
const Value *v = MO.getValue();
assert((!v || isa<PointerType>(v->getType())) &&
"SrcValue is not a pointer?");
+#endif
FoldingSetNodeID ID;
AddNodeIDNode(ID, ISD::MEMOPERAND, getVTList(MVT::Other), 0, 0);
return SDValue(N, 0);
}
+/// getShiftAmountOperand - Return the specified value casted to
+/// the target's desired shift amount type.
+SDValue SelectionDAG::getShiftAmountOperand(SDValue Op) {
+ MVT OpTy = Op.getValueType();
+ MVT ShTy = TLI.getShiftAmountTy();
+ if (OpTy == ShTy || OpTy.isVector()) return Op;
+
+ ISD::NodeType Opcode = OpTy.bitsGT(ShTy) ? ISD::TRUNCATE : ISD::ZERO_EXTEND;
+ return getNode(Opcode, ShTy, Op);
+}
+
/// CreateStackTemporary - Create a stack temporary, suitable for holding the
/// specified value type.
SDValue SelectionDAG::CreateStackTemporary(MVT VT, unsigned minAlign) {
MachineFrameInfo *FrameInfo = getMachineFunction().getFrameInfo();
- unsigned ByteSize = VT.getSizeInBits()/8;
+ unsigned ByteSize = VT.getStoreSizeInBits()/8;
const Type *Ty = VT.getTypeForMVT();
unsigned StackAlign =
std::max((unsigned)TLI.getTargetData()->getPrefTypeAlignment(Ty), minAlign);
return getFrameIndex(FrameIdx, TLI.getPointerTy());
}
+/// CreateStackTemporary - Create a stack temporary suitable for holding
+/// either of the specified value types.
+SDValue SelectionDAG::CreateStackTemporary(MVT VT1, MVT VT2) {
+ unsigned Bytes = std::max(VT1.getStoreSizeInBits(),
+ VT2.getStoreSizeInBits())/8;
+ const Type *Ty1 = VT1.getTypeForMVT();
+ const Type *Ty2 = VT2.getTypeForMVT();
+ const TargetData *TD = TLI.getTargetData();
+ unsigned Align = std::max(TD->getPrefTypeAlignment(Ty1),
+ TD->getPrefTypeAlignment(Ty2));
+
+ MachineFrameInfo *FrameInfo = getMachineFunction().getFrameInfo();
+ int FrameIdx = FrameInfo->CreateStackObject(Bytes, Align);
+ return getFrameIndex(FrameIdx, TLI.getPointerTy());
+}
+
SDValue SelectionDAG::FoldSetCC(MVT VT, SDValue N1,
SDValue N2, ISD::CondCode Cond) {
// These setcc operations always fold.
KnownOne &= KnownOne2;
KnownZero &= KnownZero2;
return;
+ case ISD::SADDO:
+ case ISD::UADDO:
+ case ISD::SSUBO:
+ case ISD::USUBO:
+ case ISD::SMULO:
+ case ISD::UMULO:
+ if (Op.getResNo() != 1)
+ return;
+ // The boolean result conforms to getBooleanContents. Fall through.
case ISD::SETCC:
// If we know the result of a setcc has the top bits zero, use this info.
- if (TLI.getSetCCResultContents() == TargetLowering::ZeroOrOneSetCCResult &&
+ if (TLI.getBooleanContents() == TargetLowering::ZeroOrOneBooleanContent &&
BitWidth > 1)
KnownZero |= APInt::getHighBitsSet(BitWidth, BitWidth - 1);
return;
if (Tmp == 1) return 1; // Early out.
Tmp2 = ComputeNumSignBits(Op.getOperand(2), Depth+1);
return std::min(Tmp, Tmp2);
-
+
+ case ISD::SADDO:
+ case ISD::UADDO:
+ case ISD::SSUBO:
+ case ISD::USUBO:
+ case ISD::SMULO:
+ case ISD::UMULO:
+ if (Op.getResNo() != 1)
+ break;
+ // The boolean result conforms to getBooleanContents. Fall through.
case ISD::SETCC:
// If setcc returns 0/-1, all bits are sign bits.
- if (TLI.getSetCCResultContents() ==
- TargetLowering::ZeroOrNegativeOneSetCCResult)
+ if (TLI.getBooleanContents() ==
+ TargetLowering::ZeroOrNegativeOneBooleanContent)
return VTBits;
break;
case ISD::ROTL:
bool SelectionDAG::isVerifiedDebugInfoDesc(SDValue Op) const {
GlobalAddressSDNode *GA = dyn_cast<GlobalAddressSDNode>(Op);
if (!GA) return false;
+ if (GA->getOffset() != 0) return false;
GlobalVariable *GV = dyn_cast<GlobalVariable>(GA->getGlobal());
if (!GV) return false;
MachineModuleInfo *MMI = getMachineModuleInfo();
- return MMI && MMI->hasDebugInfo() && MMI->isVerified(GV);
+ return MMI && MMI->hasDebugInfo();
}
if (V.getOpcode() == ISD::BIT_CONVERT) {
V = V.getOperand(0);
- if (V.getValueType().getVectorNumElements() != NumElems)
+ MVT VVT = V.getValueType();
+ if (!VVT.isVector() || VVT.getVectorNumElements() != NumElems)
return SDValue();
}
if (V.getOpcode() == ISD::SCALAR_TO_VECTOR)
/// getNode - Gets or creates the specified node.
///
SDValue SelectionDAG::getNode(unsigned Opcode, MVT VT) {
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), VT);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL, MVT VT) {
FoldingSetNodeID ID;
AddNodeIDNode(ID, Opcode, getVTList(VT), 0, 0);
void *IP = 0;
if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
return SDValue(E, 0);
SDNode *N = NodeAllocator.Allocate<SDNode>();
- new (N) SDNode(Opcode, SDNode::getSDVTList(VT));
+ new (N) SDNode(Opcode, DL, SDNode::getSDVTList(VT));
CSEMap.InsertNode(N, IP);
AllNodes.push_back(N);
}
SDValue SelectionDAG::getNode(unsigned Opcode, MVT VT, SDValue Operand) {
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), VT, Operand);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL,
+ MVT VT, SDValue Operand) {
// Constant fold unary operations with an integer constant operand.
if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Operand.getNode())) {
const APInt &Val = C->getAPIntValue();
unsigned OpOpcode = Operand.getNode()->getOpcode();
switch (Opcode) {
case ISD::TokenFactor:
+ case ISD::MERGE_VALUES:
case ISD::CONCAT_VECTORS:
- return Operand; // Factor or concat of one node? No need.
+ return Operand; // Factor, merge or concat of one node? No need.
case ISD::FP_ROUND: assert(0 && "Invalid method to make FP_ROUND node");
case ISD::FP_EXTEND:
assert(VT.isFloatingPoint() &&
return Operand.getOperand(0);
break;
case ISD::FNEG:
- if (OpOpcode == ISD::FSUB) // -(X-Y) -> (Y-X)
+ // -(X-Y) -> (Y-X) is unsafe because when X==Y, -0.0 != +0.0
+ if (UnsafeFPMath && OpOpcode == ISD::FSUB)
return getNode(ISD::FSUB, VT, Operand.getNode()->getOperand(1),
Operand.getNode()->getOperand(0));
if (OpOpcode == ISD::FNEG) // --X -> X
if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
return SDValue(E, 0);
N = NodeAllocator.Allocate<UnarySDNode>();
- new (N) UnarySDNode(Opcode, VTs, Operand);
+ new (N) UnarySDNode(Opcode, DL, VTs, Operand);
CSEMap.InsertNode(N, IP);
} else {
N = NodeAllocator.Allocate<UnarySDNode>();
- new (N) UnarySDNode(Opcode, VTs, Operand);
+ new (N) UnarySDNode(Opcode, DL, VTs, Operand);
}
AllNodes.push_back(N);
SDValue SelectionDAG::getNode(unsigned Opcode, MVT VT,
SDValue N1, SDValue N2) {
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), VT, N1, N2);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL, MVT VT,
+ SDValue N1, SDValue N2) {
ConstantSDNode *N1C = dyn_cast<ConstantSDNode>(N1.getNode());
ConstantSDNode *N2C = dyn_cast<ConstantSDNode>(N2.getNode());
switch (Opcode) {
case ISD::UREM:
case ISD::MULHU:
case ISD::MULHS:
- assert(VT.isInteger() && "This operator does not apply to FP types!");
- // fall through
case ISD::MUL:
case ISD::SDIV:
case ISD::SREM:
+ assert(VT.isInteger() && "This operator does not apply to FP types!");
+ // fall through
case ISD::FADD:
case ISD::FSUB:
case ISD::FMUL:
case ISD::FDIV:
case ISD::FREM:
+ if (UnsafeFPMath) {
+ if (Opcode == ISD::FADD) {
+ // 0+x --> x
+ if (ConstantFPSDNode *CFP = dyn_cast<ConstantFPSDNode>(N1))
+ if (CFP->getValueAPF().isZero())
+ return N2;
+ // x+0 --> x
+ if (ConstantFPSDNode *CFP = dyn_cast<ConstantFPSDNode>(N2))
+ if (CFP->getValueAPF().isZero())
+ return N1;
+ } else if (Opcode == ISD::FSUB) {
+ // x-0 --> x
+ if (ConstantFPSDNode *CFP = dyn_cast<ConstantFPSDNode>(N2))
+ if (CFP->getValueAPF().isZero())
+ return N1;
+ }
+ }
assert(N1.getValueType() == N2.getValueType() &&
N1.getValueType() == VT && "Binary operator types must match!");
break;
// EXTRACT_VECTOR_ELT of INSERT_VECTOR_ELT is often formed when vector
// operations are lowered to scalars.
if (N1.getOpcode() == ISD::INSERT_VECTOR_ELT) {
+ // If the indices are the same, return the inserted element.
if (N1.getOperand(2) == N2)
return N1.getOperand(1);
- else
+ // If the indices are known different, extract the element from
+ // the original vector.
+ else if (isa<ConstantSDNode>(N1.getOperand(2)) &&
+ isa<ConstantSDNode>(N2))
return getNode(ISD::EXTRACT_VECTOR_ELT, VT, N1.getOperand(0), N2);
}
break;
if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
return SDValue(E, 0);
N = NodeAllocator.Allocate<BinarySDNode>();
- new (N) BinarySDNode(Opcode, VTs, N1, N2);
+ new (N) BinarySDNode(Opcode, DL, VTs, N1, N2);
CSEMap.InsertNode(N, IP);
} else {
N = NodeAllocator.Allocate<BinarySDNode>();
- new (N) BinarySDNode(Opcode, VTs, N1, N2);
+ new (N) BinarySDNode(Opcode, DL, VTs, N1, N2);
}
AllNodes.push_back(N);
SDValue SelectionDAG::getNode(unsigned Opcode, MVT VT,
SDValue N1, SDValue N2, SDValue N3) {
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), VT, N1, N2, N3);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL, MVT VT,
+ SDValue N1, SDValue N2, SDValue N3) {
// Perform various simplifications.
ConstantSDNode *N1C = dyn_cast<ConstantSDNode>(N1.getNode());
ConstantSDNode *N2C = dyn_cast<ConstantSDNode>(N2.getNode());
}
break;
case ISD::VECTOR_SHUFFLE:
- assert(VT == N1.getValueType() && VT == N2.getValueType() &&
+ assert(N1.getValueType() == N2.getValueType() &&
+ N1.getValueType().isVector() &&
VT.isVector() && N3.getValueType().isVector() &&
N3.getOpcode() == ISD::BUILD_VECTOR &&
VT.getVectorNumElements() == N3.getNumOperands() &&
if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
return SDValue(E, 0);
N = NodeAllocator.Allocate<TernarySDNode>();
- new (N) TernarySDNode(Opcode, VTs, N1, N2, N3);
+ new (N) TernarySDNode(Opcode, DL, VTs, N1, N2, N3);
CSEMap.InsertNode(N, IP);
} else {
N = NodeAllocator.Allocate<TernarySDNode>();
- new (N) TernarySDNode(Opcode, VTs, N1, N2, N3);
+ new (N) TernarySDNode(Opcode, DL, VTs, N1, N2, N3);
}
AllNodes.push_back(N);
#ifndef NDEBUG
SDValue SelectionDAG::getNode(unsigned Opcode, MVT VT,
SDValue N1, SDValue N2, SDValue N3,
SDValue N4) {
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), VT, N1, N2, N3, N4);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL, MVT VT,
+ SDValue N1, SDValue N2, SDValue N3,
+ SDValue N4) {
SDValue Ops[] = { N1, N2, N3, N4 };
- return getNode(Opcode, VT, Ops, 4);
+ return getNode(Opcode, DL, VT, Ops, 4);
}
SDValue SelectionDAG::getNode(unsigned Opcode, MVT VT,
SDValue N1, SDValue N2, SDValue N3,
SDValue N4, SDValue N5) {
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), VT, N1, N2, N3, N4, N5);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL, MVT VT,
+ SDValue N1, SDValue N2, SDValue N3,
+ SDValue N4, SDValue N5) {
SDValue Ops[] = { N1, N2, N3, N4, N5 };
- return getNode(Opcode, VT, Ops, 5);
+ return getNode(Opcode, DL, VT, Ops, 5);
}
/// getMemsetValue - Vectorized representation of the memset value
return DAG.getConstantFP(APFloat(Val), VT);
}
+ const TargetLowering &TLI = DAG.getTargetLoweringInfo();
Value = DAG.getNode(ISD::ZERO_EXTEND, VT, Value);
unsigned Shift = 8;
for (unsigned i = NumBits; i > 8; i >>= 1) {
Value = DAG.getNode(ISD::OR, VT,
DAG.getNode(ISD::SHL, VT, Value,
- DAG.getConstant(Shift, MVT::i8)), Value);
+ DAG.getConstant(Shift,
+ TLI.getShiftAmountTy())),
+ Value);
Shift <<= 1;
}
isSrcStr = isMemSrcFromString(Src, Str);
bool isSrcConst = isa<ConstantSDNode>(Src);
bool AllowUnalign = TLI.allowsUnalignedMemoryAccesses();
- MVT VT= TLI.getOptimalMemOpType(Size, Align, isSrcConst, isSrcStr);
+ MVT VT = TLI.getOptimalMemOpType(Size, Align, isSrcConst, isSrcStr);
if (VT != MVT::iAny) {
unsigned NewAlign = (unsigned)
TLI.getTargetData()->getABITypeAlignment(VT.getTypeForMVT());
unsigned VTSize = VT.getSizeInBits() / 8;
SDValue Value = getMemsetValue(Src, VT, DAG);
SDValue Store = DAG.getStore(Chain, Value,
- getMemBasePlusOffset(Dst, DstOff, DAG),
- DstSV, DstSVOff + DstOff);
+ getMemBasePlusOffset(Dst, DstOff, DAG),
+ DstSV, DstSVOff + DstOff);
OutChains.push_back(Store);
DstOff += VTSize;
}
Entry.Node = Dst; Args.push_back(Entry);
Entry.Node = Src; Args.push_back(Entry);
Entry.Node = Size; Args.push_back(Entry);
+ // FIXME: pass in DebugLoc
std::pair<SDValue,SDValue> CallResult =
TLI.LowerCallTo(Chain, Type::VoidTy,
false, false, false, false, CallingConv::C, false,
getExternalSymbol("memcpy", TLI.getPointerTy()),
- Args, *this);
+ Args, *this, DebugLoc::getUnknownLoc());
return CallResult.second;
}
Entry.Node = Dst; Args.push_back(Entry);
Entry.Node = Src; Args.push_back(Entry);
Entry.Node = Size; Args.push_back(Entry);
+ // FIXME: pass in DebugLoc
std::pair<SDValue,SDValue> CallResult =
TLI.LowerCallTo(Chain, Type::VoidTy,
false, false, false, false, CallingConv::C, false,
getExternalSymbol("memmove", TLI.getPointerTy()),
- Args, *this);
+ Args, *this, DebugLoc::getUnknownLoc());
return CallResult.second;
}
Args.push_back(Entry);
Entry.Node = Size; Entry.Ty = IntPtrTy; Entry.isSExt = false;
Args.push_back(Entry);
+ // FIXME: pass in DebugLoc
std::pair<SDValue,SDValue> CallResult =
TLI.LowerCallTo(Chain, Type::VoidTy,
false, false, false, false, CallingConv::C, false,
getExternalSymbol("memset", TLI.getPointerTy()),
- Args, *this);
+ Args, *this, DebugLoc::getUnknownLoc());
return CallResult.second;
}
-SDValue SelectionDAG::getAtomic(unsigned Opcode, SDValue Chain,
+SDValue SelectionDAG::getAtomic(unsigned Opcode, MVT MemVT,
+ SDValue Chain,
SDValue Ptr, SDValue Cmp,
SDValue Swp, const Value* PtrVal,
unsigned Alignment) {
- assert((Opcode == ISD::ATOMIC_CMP_SWAP_8 ||
- Opcode == ISD::ATOMIC_CMP_SWAP_16 ||
- Opcode == ISD::ATOMIC_CMP_SWAP_32 ||
- Opcode == ISD::ATOMIC_CMP_SWAP_64) && "Invalid Atomic Op");
+ assert(Opcode == ISD::ATOMIC_CMP_SWAP && "Invalid Atomic Op");
assert(Cmp.getValueType() == Swp.getValueType() && "Invalid Atomic Op Types");
MVT VT = Cmp.getValueType();
if (Alignment == 0) // Ensure that codegen never sees alignment 0
- Alignment = getMVTAlignment(VT);
+ Alignment = getMVTAlignment(MemVT);
+
+ SDVTList VTs = getVTList(VT, MVT::Other);
+ FoldingSetNodeID ID;
+ SDValue Ops[] = {Chain, Ptr, Cmp, Swp};
+ AddNodeIDNode(ID, Opcode, VTs, Ops, 4);
+ void* IP = 0;
+ if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
+ return SDValue(E, 0);
+ SDNode* N = NodeAllocator.Allocate<AtomicSDNode>();
+ new (N) AtomicSDNode(Opcode, VTs, MemVT,
+ Chain, Ptr, Cmp, Swp, PtrVal, Alignment);
+ CSEMap.InsertNode(N, IP);
+ AllNodes.push_back(N);
+ return SDValue(N, 0);
+}
+
+SDValue SelectionDAG::getAtomic(unsigned Opcode, DebugLoc dl, MVT MemVT,
+ SDValue Chain,
+ SDValue Ptr, SDValue Cmp,
+ SDValue Swp, const Value* PtrVal,
+ unsigned Alignment) {
+ assert(Opcode == ISD::ATOMIC_CMP_SWAP && "Invalid Atomic Op");
+ assert(Cmp.getValueType() == Swp.getValueType() && "Invalid Atomic Op Types");
+
+ MVT VT = Cmp.getValueType();
+
+ if (Alignment == 0) // Ensure that codegen never sees alignment 0
+ Alignment = getMVTAlignment(MemVT);
SDVTList VTs = getVTList(VT, MVT::Other);
FoldingSetNodeID ID;
if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
return SDValue(E, 0);
SDNode* N = NodeAllocator.Allocate<AtomicSDNode>();
- new (N) AtomicSDNode(Opcode, VTs, Chain, Ptr, Cmp, Swp, PtrVal, Alignment);
+ new (N) AtomicSDNode(Opcode, dl, VTs, MemVT,
+ Chain, Ptr, Cmp, Swp, PtrVal, Alignment);
CSEMap.InsertNode(N, IP);
AllNodes.push_back(N);
return SDValue(N, 0);
}
-SDValue SelectionDAG::getAtomic(unsigned Opcode, SDValue Chain,
+SDValue SelectionDAG::getAtomic(unsigned Opcode, MVT MemVT,
+ SDValue Chain,
SDValue Ptr, SDValue Val,
const Value* PtrVal,
unsigned Alignment) {
- assert((Opcode == ISD::ATOMIC_LOAD_ADD_8 ||
- Opcode == ISD::ATOMIC_LOAD_SUB_8 ||
- Opcode == ISD::ATOMIC_LOAD_AND_8 ||
- Opcode == ISD::ATOMIC_LOAD_OR_8 ||
- Opcode == ISD::ATOMIC_LOAD_XOR_8 ||
- Opcode == ISD::ATOMIC_LOAD_NAND_8 ||
- Opcode == ISD::ATOMIC_LOAD_MIN_8 ||
- Opcode == ISD::ATOMIC_LOAD_MAX_8 ||
- Opcode == ISD::ATOMIC_LOAD_UMIN_8 ||
- Opcode == ISD::ATOMIC_LOAD_UMAX_8 ||
- Opcode == ISD::ATOMIC_SWAP_8 ||
- Opcode == ISD::ATOMIC_LOAD_ADD_16 ||
- Opcode == ISD::ATOMIC_LOAD_SUB_16 ||
- Opcode == ISD::ATOMIC_LOAD_AND_16 ||
- Opcode == ISD::ATOMIC_LOAD_OR_16 ||
- Opcode == ISD::ATOMIC_LOAD_XOR_16 ||
- Opcode == ISD::ATOMIC_LOAD_NAND_16 ||
- Opcode == ISD::ATOMIC_LOAD_MIN_16 ||
- Opcode == ISD::ATOMIC_LOAD_MAX_16 ||
- Opcode == ISD::ATOMIC_LOAD_UMIN_16 ||
- Opcode == ISD::ATOMIC_LOAD_UMAX_16 ||
- Opcode == ISD::ATOMIC_SWAP_16 ||
- Opcode == ISD::ATOMIC_LOAD_ADD_32 ||
- Opcode == ISD::ATOMIC_LOAD_SUB_32 ||
- Opcode == ISD::ATOMIC_LOAD_AND_32 ||
- Opcode == ISD::ATOMIC_LOAD_OR_32 ||
- Opcode == ISD::ATOMIC_LOAD_XOR_32 ||
- Opcode == ISD::ATOMIC_LOAD_NAND_32 ||
- Opcode == ISD::ATOMIC_LOAD_MIN_32 ||
- Opcode == ISD::ATOMIC_LOAD_MAX_32 ||
- Opcode == ISD::ATOMIC_LOAD_UMIN_32 ||
- Opcode == ISD::ATOMIC_LOAD_UMAX_32 ||
- Opcode == ISD::ATOMIC_SWAP_32 ||
- Opcode == ISD::ATOMIC_LOAD_ADD_64 ||
- Opcode == ISD::ATOMIC_LOAD_SUB_64 ||
- Opcode == ISD::ATOMIC_LOAD_AND_64 ||
- Opcode == ISD::ATOMIC_LOAD_OR_64 ||
- Opcode == ISD::ATOMIC_LOAD_XOR_64 ||
- Opcode == ISD::ATOMIC_LOAD_NAND_64 ||
- Opcode == ISD::ATOMIC_LOAD_MIN_64 ||
- Opcode == ISD::ATOMIC_LOAD_MAX_64 ||
- Opcode == ISD::ATOMIC_LOAD_UMIN_64 ||
- Opcode == ISD::ATOMIC_LOAD_UMAX_64 ||
- Opcode == ISD::ATOMIC_SWAP_64) && "Invalid Atomic Op");
+ assert((Opcode == ISD::ATOMIC_LOAD_ADD ||
+ Opcode == ISD::ATOMIC_LOAD_SUB ||
+ Opcode == ISD::ATOMIC_LOAD_AND ||
+ Opcode == ISD::ATOMIC_LOAD_OR ||
+ Opcode == ISD::ATOMIC_LOAD_XOR ||
+ Opcode == ISD::ATOMIC_LOAD_NAND ||
+ Opcode == ISD::ATOMIC_LOAD_MIN ||
+ Opcode == ISD::ATOMIC_LOAD_MAX ||
+ Opcode == ISD::ATOMIC_LOAD_UMIN ||
+ Opcode == ISD::ATOMIC_LOAD_UMAX ||
+ Opcode == ISD::ATOMIC_SWAP) &&
+ "Invalid Atomic Op");
MVT VT = Val.getValueType();
if (Alignment == 0) // Ensure that codegen never sees alignment 0
- Alignment = getMVTAlignment(VT);
+ Alignment = getMVTAlignment(MemVT);
SDVTList VTs = getVTList(VT, MVT::Other);
FoldingSetNodeID ID;
if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
return SDValue(E, 0);
SDNode* N = NodeAllocator.Allocate<AtomicSDNode>();
- new (N) AtomicSDNode(Opcode, VTs, Chain, Ptr, Val, PtrVal, Alignment);
+ new (N) AtomicSDNode(Opcode, VTs, MemVT,
+ Chain, Ptr, Val, PtrVal, Alignment);
CSEMap.InsertNode(N, IP);
AllNodes.push_back(N);
return SDValue(N, 0);
}
-/// getMergeValues - Create a MERGE_VALUES node from the given operands.
+SDValue SelectionDAG::getAtomic(unsigned Opcode, DebugLoc dl, MVT MemVT,
+ SDValue Chain,
+ SDValue Ptr, SDValue Val,
+ const Value* PtrVal,
+ unsigned Alignment) {
+ assert((Opcode == ISD::ATOMIC_LOAD_ADD ||
+ Opcode == ISD::ATOMIC_LOAD_SUB ||
+ Opcode == ISD::ATOMIC_LOAD_AND ||
+ Opcode == ISD::ATOMIC_LOAD_OR ||
+ Opcode == ISD::ATOMIC_LOAD_XOR ||
+ Opcode == ISD::ATOMIC_LOAD_NAND ||
+ Opcode == ISD::ATOMIC_LOAD_MIN ||
+ Opcode == ISD::ATOMIC_LOAD_MAX ||
+ Opcode == ISD::ATOMIC_LOAD_UMIN ||
+ Opcode == ISD::ATOMIC_LOAD_UMAX ||
+ Opcode == ISD::ATOMIC_SWAP) &&
+ "Invalid Atomic Op");
+
+ MVT VT = Val.getValueType();
+
+ if (Alignment == 0) // Ensure that codegen never sees alignment 0
+ Alignment = getMVTAlignment(MemVT);
+
+ SDVTList VTs = getVTList(VT, MVT::Other);
+ FoldingSetNodeID ID;
+ SDValue Ops[] = {Chain, Ptr, Val};
+ AddNodeIDNode(ID, Opcode, VTs, Ops, 3);
+ void* IP = 0;
+ if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
+ return SDValue(E, 0);
+ SDNode* N = NodeAllocator.Allocate<AtomicSDNode>();
+ new (N) AtomicSDNode(Opcode, dl, VTs, MemVT,
+ Chain, Ptr, Val, PtrVal, Alignment);
+ CSEMap.InsertNode(N, IP);
+ AllNodes.push_back(N);
+ return SDValue(N, 0);
+}
+
+/// getMergeValues - Create a MERGE_VALUES node from the given operands.
/// Allowed to return something different (and simpler) if Simplify is true.
-SDValue SelectionDAG::getMergeValues(const SDValue *Ops, unsigned NumOps,
- bool Simplify) {
- if (Simplify && NumOps == 1)
+SDValue SelectionDAG::getMergeValues(const SDValue *Ops, unsigned NumOps) {
+ if (NumOps == 1)
return Ops[0];
SmallVector<MVT, 4> VTs;
return getNode(ISD::MERGE_VALUES, getVTList(&VTs[0], NumOps), Ops, NumOps);
}
+SDValue
+SelectionDAG::getMemIntrinsicNode(unsigned Opcode,
+ const MVT *VTs, unsigned NumVTs,
+ const SDValue *Ops, unsigned NumOps,
+ MVT MemVT, const Value *srcValue, int SVOff,
+ unsigned Align, bool Vol,
+ bool ReadMem, bool WriteMem) {
+ return getMemIntrinsicNode(Opcode, makeVTList(VTs, NumVTs), Ops, NumOps,
+ MemVT, srcValue, SVOff, Align, Vol,
+ ReadMem, WriteMem);
+}
+
+SDValue
+SelectionDAG::getMemIntrinsicNode(unsigned Opcode, DebugLoc dl,
+ const MVT *VTs, unsigned NumVTs,
+ const SDValue *Ops, unsigned NumOps,
+ MVT MemVT, const Value *srcValue, int SVOff,
+ unsigned Align, bool Vol,
+ bool ReadMem, bool WriteMem) {
+ return getMemIntrinsicNode(Opcode, dl, makeVTList(VTs, NumVTs), Ops, NumOps,
+ MemVT, srcValue, SVOff, Align, Vol,
+ ReadMem, WriteMem);
+}
+
+SDValue
+SelectionDAG::getMemIntrinsicNode(unsigned Opcode, SDVTList VTList,
+ const SDValue *Ops, unsigned NumOps,
+ MVT MemVT, const Value *srcValue, int SVOff,
+ unsigned Align, bool Vol,
+ bool ReadMem, bool WriteMem) {
+ // Memoize the node unless it returns a flag.
+ MemIntrinsicSDNode *N;
+ if (VTList.VTs[VTList.NumVTs-1] != MVT::Flag) {
+ FoldingSetNodeID ID;
+ AddNodeIDNode(ID, Opcode, VTList, Ops, NumOps);
+ void *IP = 0;
+ if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
+ return SDValue(E, 0);
+
+ N = NodeAllocator.Allocate<MemIntrinsicSDNode>();
+ new (N) MemIntrinsicSDNode(Opcode, VTList, Ops, NumOps, MemVT,
+ srcValue, SVOff, Align, Vol, ReadMem, WriteMem);
+ CSEMap.InsertNode(N, IP);
+ } else {
+ N = NodeAllocator.Allocate<MemIntrinsicSDNode>();
+ new (N) MemIntrinsicSDNode(Opcode, VTList, Ops, NumOps, MemVT,
+ srcValue, SVOff, Align, Vol, ReadMem, WriteMem);
+ }
+ AllNodes.push_back(N);
+ return SDValue(N, 0);
+}
+
+SDValue
+SelectionDAG::getMemIntrinsicNode(unsigned Opcode, DebugLoc dl, SDVTList VTList,
+ const SDValue *Ops, unsigned NumOps,
+ MVT MemVT, const Value *srcValue, int SVOff,
+ unsigned Align, bool Vol,
+ bool ReadMem, bool WriteMem) {
+ // Memoize the node unless it returns a flag.
+ MemIntrinsicSDNode *N;
+ if (VTList.VTs[VTList.NumVTs-1] != MVT::Flag) {
+ FoldingSetNodeID ID;
+ AddNodeIDNode(ID, Opcode, VTList, Ops, NumOps);
+ void *IP = 0;
+ if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
+ return SDValue(E, 0);
+
+ N = NodeAllocator.Allocate<MemIntrinsicSDNode>();
+ new (N) MemIntrinsicSDNode(Opcode, dl, VTList, Ops, NumOps, MemVT,
+ srcValue, SVOff, Align, Vol, ReadMem, WriteMem);
+ CSEMap.InsertNode(N, IP);
+ } else {
+ N = NodeAllocator.Allocate<MemIntrinsicSDNode>();
+ new (N) MemIntrinsicSDNode(Opcode, dl, VTList, Ops, NumOps, MemVT,
+ srcValue, SVOff, Align, Vol, ReadMem, WriteMem);
+ }
+ AllNodes.push_back(N);
+ return SDValue(N, 0);
+}
+
SDValue
SelectionDAG::getCall(unsigned CallingConv, bool IsVarArgs, bool IsTailCall,
bool IsInreg, SDVTList VTs,
return SDValue(N, 0);
}
+SDValue
+SelectionDAG::getCall(unsigned CallingConv, DebugLoc dl, bool IsVarArgs,
+ bool IsTailCall, bool IsInreg, SDVTList VTs,
+ const SDValue *Operands, unsigned NumOperands) {
+ // Do not include isTailCall in the folding set profile.
+ FoldingSetNodeID ID;
+ AddNodeIDNode(ID, ISD::CALL, VTs, Operands, NumOperands);
+ ID.AddInteger(CallingConv);
+ ID.AddInteger(IsVarArgs);
+ void *IP = 0;
+ if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP)) {
+ // Instead of including isTailCall in the folding set, we just
+ // set the flag of the existing node.
+ if (!IsTailCall)
+ cast<CallSDNode>(E)->setNotTailCall();
+ return SDValue(E, 0);
+ }
+ SDNode *N = NodeAllocator.Allocate<CallSDNode>();
+ new (N) CallSDNode(CallingConv, dl, IsVarArgs, IsTailCall, IsInreg,
+ VTs, Operands, NumOperands);
+ CSEMap.InsertNode(N, IP);
+ AllNodes.push_back(N);
+ return SDValue(N, 0);
+}
+
SDValue
SelectionDAG::getLoad(ISD::MemIndexedMode AM, ISD::LoadExtType ExtType,
MVT VT, SDValue Chain,
return SDValue(N, 0);
}
+SDValue
+SelectionDAG::getLoad(ISD::MemIndexedMode AM, DebugLoc dl,
+ ISD::LoadExtType ExtType, MVT VT, SDValue Chain,
+ SDValue Ptr, SDValue Offset,
+ const Value *SV, int SVOffset, MVT EVT,
+ bool isVolatile, unsigned Alignment) {
+ if (Alignment == 0) // Ensure that codegen never sees alignment 0
+ Alignment = getMVTAlignment(VT);
+
+ if (VT == EVT) {
+ ExtType = ISD::NON_EXTLOAD;
+ } else if (ExtType == ISD::NON_EXTLOAD) {
+ assert(VT == EVT && "Non-extending load from different memory type!");
+ } else {
+ // Extending load.
+ if (VT.isVector())
+ assert(EVT.getVectorNumElements() == VT.getVectorNumElements() &&
+ "Invalid vector extload!");
+ else
+ assert(EVT.bitsLT(VT) &&
+ "Should only be an extending load, not truncating!");
+ assert((ExtType == ISD::EXTLOAD || VT.isInteger()) &&
+ "Cannot sign/zero extend a FP/Vector load!");
+ assert(VT.isInteger() == EVT.isInteger() &&
+ "Cannot convert from FP to Int or Int -> FP!");
+ }
+
+ bool Indexed = AM != ISD::UNINDEXED;
+ assert((Indexed || Offset.getOpcode() == ISD::UNDEF) &&
+ "Unindexed load with an offset!");
+
+ SDVTList VTs = Indexed ?
+ getVTList(VT, Ptr.getValueType(), MVT::Other) : getVTList(VT, MVT::Other);
+ SDValue Ops[] = { Chain, Ptr, Offset };
+ FoldingSetNodeID ID;
+ AddNodeIDNode(ID, ISD::LOAD, VTs, Ops, 3);
+ ID.AddInteger(AM);
+ ID.AddInteger(ExtType);
+ ID.AddInteger(EVT.getRawBits());
+ ID.AddInteger(encodeMemSDNodeFlags(isVolatile, Alignment));
+ void *IP = 0;
+ if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
+ return SDValue(E, 0);
+ SDNode *N = NodeAllocator.Allocate<LoadSDNode>();
+ new (N) LoadSDNode(Ops, dl, VTs, AM, ExtType, EVT, SV, SVOffset,
+ Alignment, isVolatile);
+ CSEMap.InsertNode(N, IP);
+ AllNodes.push_back(N);
+ return SDValue(N, 0);
+}
+
SDValue SelectionDAG::getLoad(MVT VT,
SDValue Chain, SDValue Ptr,
const Value *SV, int SVOffset,
SV, SVOffset, VT, isVolatile, Alignment);
}
+SDValue SelectionDAG::getLoad(MVT VT, DebugLoc dl,
+ SDValue Chain, SDValue Ptr,
+ const Value *SV, int SVOffset,
+ bool isVolatile, unsigned Alignment) {
+ SDValue Undef = getNode(ISD::UNDEF, Ptr.getValueType());
+ return getLoad(ISD::UNINDEXED, dl, ISD::NON_EXTLOAD, VT, Chain, Ptr, Undef,
+ SV, SVOffset, VT, isVolatile, Alignment);
+}
+
SDValue SelectionDAG::getExtLoad(ISD::LoadExtType ExtType, MVT VT,
SDValue Chain, SDValue Ptr,
const Value *SV,
SV, SVOffset, EVT, isVolatile, Alignment);
}
+SDValue SelectionDAG::getExtLoad(ISD::LoadExtType ExtType, DebugLoc dl, MVT VT,
+ SDValue Chain, SDValue Ptr,
+ const Value *SV,
+ int SVOffset, MVT EVT,
+ bool isVolatile, unsigned Alignment) {
+ SDValue Undef = getNode(ISD::UNDEF, Ptr.getValueType());
+ return getLoad(ISD::UNINDEXED, dl, ExtType, VT, Chain, Ptr, Undef,
+ SV, SVOffset, EVT, isVolatile, Alignment);
+}
+
SDValue
SelectionDAG::getIndexedLoad(SDValue OrigLoad, SDValue Base,
SDValue Offset, ISD::MemIndexedMode AM) {
LD->isVolatile(), LD->getAlignment());
}
+SDValue
+SelectionDAG::getIndexedLoad(SDValue OrigLoad, DebugLoc dl, SDValue Base,
+ SDValue Offset, ISD::MemIndexedMode AM) {
+ LoadSDNode *LD = cast<LoadSDNode>(OrigLoad);
+ assert(LD->getOffset().getOpcode() == ISD::UNDEF &&
+ "Load is already a indexed load!");
+ return getLoad(AM, dl, LD->getExtensionType(), OrigLoad.getValueType(),
+ LD->getChain(), Base, Offset, LD->getSrcValue(),
+ LD->getSrcValueOffset(), LD->getMemoryVT(),
+ LD->isVolatile(), LD->getAlignment());
+}
+
SDValue SelectionDAG::getStore(SDValue Chain, SDValue Val,
SDValue Ptr, const Value *SV, int SVOffset,
bool isVolatile, unsigned Alignment) {
return SDValue(N, 0);
}
+SDValue SelectionDAG::getStore(SDValue Chain, DebugLoc dl, SDValue Val,
+ SDValue Ptr, const Value *SV, int SVOffset,
+ bool isVolatile, unsigned Alignment) {
+ MVT VT = Val.getValueType();
+
+ if (Alignment == 0) // Ensure that codegen never sees alignment 0
+ Alignment = getMVTAlignment(VT);
+
+ SDVTList VTs = getVTList(MVT::Other);
+ SDValue Undef = getNode(ISD::UNDEF, Ptr.getValueType());
+ SDValue Ops[] = { Chain, Val, Ptr, Undef };
+ FoldingSetNodeID ID;
+ AddNodeIDNode(ID, ISD::STORE, VTs, Ops, 4);
+ ID.AddInteger(ISD::UNINDEXED);
+ ID.AddInteger(false);
+ ID.AddInteger(VT.getRawBits());
+ ID.AddInteger(encodeMemSDNodeFlags(isVolatile, Alignment));
+ void *IP = 0;
+ if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
+ return SDValue(E, 0);
+ SDNode *N = NodeAllocator.Allocate<StoreSDNode>();
+ new (N) StoreSDNode(Ops, dl, VTs, ISD::UNINDEXED, false,
+ VT, SV, SVOffset, Alignment, isVolatile);
+ CSEMap.InsertNode(N, IP);
+ AllNodes.push_back(N);
+ return SDValue(N, 0);
+}
+
SDValue SelectionDAG::getTruncStore(SDValue Chain, SDValue Val,
SDValue Ptr, const Value *SV,
int SVOffset, MVT SVT,
return SDValue(N, 0);
}
+SDValue SelectionDAG::getTruncStore(SDValue Chain, DebugLoc dl, SDValue Val,
+ SDValue Ptr, const Value *SV,
+ int SVOffset, MVT SVT,
+ bool isVolatile, unsigned Alignment) {
+ MVT VT = Val.getValueType();
+
+ if (VT == SVT)
+ return getStore(Chain, dl, Val, Ptr, SV, SVOffset, isVolatile, Alignment);
+
+ assert(VT.bitsGT(SVT) && "Not a truncation?");
+ assert(VT.isInteger() == SVT.isInteger() &&
+ "Can't do FP-INT conversion!");
+
+ if (Alignment == 0) // Ensure that codegen never sees alignment 0
+ Alignment = getMVTAlignment(VT);
+
+ SDVTList VTs = getVTList(MVT::Other);
+ SDValue Undef = getNode(ISD::UNDEF, Ptr.getValueType());
+ SDValue Ops[] = { Chain, Val, Ptr, Undef };
+ FoldingSetNodeID ID;
+ AddNodeIDNode(ID, ISD::STORE, VTs, Ops, 4);
+ ID.AddInteger(ISD::UNINDEXED);
+ ID.AddInteger(1);
+ ID.AddInteger(SVT.getRawBits());
+ ID.AddInteger(encodeMemSDNodeFlags(isVolatile, Alignment));
+ void *IP = 0;
+ if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
+ return SDValue(E, 0);
+ SDNode *N = NodeAllocator.Allocate<StoreSDNode>();
+ new (N) StoreSDNode(Ops, dl, VTs, ISD::UNINDEXED, true,
+ SVT, SV, SVOffset, Alignment, isVolatile);
+ CSEMap.InsertNode(N, IP);
+ AllNodes.push_back(N);
+ return SDValue(N, 0);
+}
+
SDValue
SelectionDAG::getIndexedStore(SDValue OrigStore, SDValue Base,
SDValue Offset, ISD::MemIndexedMode AM) {
return SDValue(N, 0);
}
+SDValue
+SelectionDAG::getIndexedStore(SDValue OrigStore, DebugLoc dl, SDValue Base,
+ SDValue Offset, ISD::MemIndexedMode AM) {
+ StoreSDNode *ST = cast<StoreSDNode>(OrigStore);
+ assert(ST->getOffset().getOpcode() == ISD::UNDEF &&
+ "Store is already a indexed store!");
+ SDVTList VTs = getVTList(Base.getValueType(), MVT::Other);
+ SDValue Ops[] = { ST->getChain(), ST->getValue(), Base, Offset };
+ FoldingSetNodeID ID;
+ AddNodeIDNode(ID, ISD::STORE, VTs, Ops, 4);
+ ID.AddInteger(AM);
+ ID.AddInteger(ST->isTruncatingStore());
+ ID.AddInteger(ST->getMemoryVT().getRawBits());
+ ID.AddInteger(ST->getRawFlags());
+ void *IP = 0;
+ if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
+ return SDValue(E, 0);
+ SDNode *N = NodeAllocator.Allocate<StoreSDNode>();
+ new (N) StoreSDNode(Ops, dl, VTs, AM,
+ ST->isTruncatingStore(), ST->getMemoryVT(),
+ ST->getSrcValue(), ST->getSrcValueOffset(),
+ ST->getAlignment(), ST->isVolatile());
+ CSEMap.InsertNode(N, IP);
+ AllNodes.push_back(N);
+ return SDValue(N, 0);
+}
+
SDValue SelectionDAG::getVAArg(MVT VT,
SDValue Chain, SDValue Ptr,
SDValue SV) {
SDValue SelectionDAG::getNode(unsigned Opcode, MVT VT,
const SDUse *Ops, unsigned NumOps) {
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), VT, Ops, NumOps);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL, MVT VT,
+ const SDUse *Ops, unsigned NumOps) {
switch (NumOps) {
- case 0: return getNode(Opcode, VT);
- case 1: return getNode(Opcode, VT, Ops[0]);
- case 2: return getNode(Opcode, VT, Ops[0], Ops[1]);
- case 3: return getNode(Opcode, VT, Ops[0], Ops[1], Ops[2]);
+ case 0: return getNode(Opcode, DL, VT);
+ case 1: return getNode(Opcode, DL, VT, Ops[0]);
+ case 2: return getNode(Opcode, DL, VT, Ops[0], Ops[1]);
+ case 3: return getNode(Opcode, DL, VT, Ops[0], Ops[1], Ops[2]);
default: break;
}
// Copy from an SDUse array into an SDValue array for use with
// the regular getNode logic.
SmallVector<SDValue, 8> NewOps(Ops, Ops + NumOps);
- return getNode(Opcode, VT, &NewOps[0], NumOps);
+ return getNode(Opcode, DL, VT, &NewOps[0], NumOps);
}
SDValue SelectionDAG::getNode(unsigned Opcode, MVT VT,
const SDValue *Ops, unsigned NumOps) {
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), VT, Ops, NumOps);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL, MVT VT,
+ const SDValue *Ops, unsigned NumOps) {
switch (NumOps) {
- case 0: return getNode(Opcode, VT);
- case 1: return getNode(Opcode, VT, Ops[0]);
- case 2: return getNode(Opcode, VT, Ops[0], Ops[1]);
- case 3: return getNode(Opcode, VT, Ops[0], Ops[1], Ops[2]);
+ case 0: return getNode(Opcode, DL, VT);
+ case 1: return getNode(Opcode, DL, VT, Ops[0]);
+ case 2: return getNode(Opcode, DL, VT, Ops[0], Ops[1]);
+ case 3: return getNode(Opcode, DL, VT, Ops[0], Ops[1], Ops[2]);
default: break;
}
// Memoize nodes.
SDNode *N;
SDVTList VTs = getVTList(VT);
+
if (VT != MVT::Flag) {
FoldingSetNodeID ID;
AddNodeIDNode(ID, Opcode, VTs, Ops, NumOps);
void *IP = 0;
+
if (SDNode *E = CSEMap.FindNodeOrInsertPos(ID, IP))
return SDValue(E, 0);
+
N = NodeAllocator.Allocate<SDNode>();
- new (N) SDNode(Opcode, VTs, Ops, NumOps);
+ new (N) SDNode(Opcode, DL, VTs, Ops, NumOps);
CSEMap.InsertNode(N, IP);
} else {
N = NodeAllocator.Allocate<SDNode>();
- new (N) SDNode(Opcode, VTs, Ops, NumOps);
+ new (N) SDNode(Opcode, DL, VTs, Ops, NumOps);
}
+
AllNodes.push_back(N);
#ifndef NDEBUG
VerifyNode(N);
SDValue SelectionDAG::getNode(unsigned Opcode,
const std::vector<MVT> &ResultTys,
const SDValue *Ops, unsigned NumOps) {
- return getNode(Opcode, getNodeValueTypes(ResultTys), ResultTys.size(),
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), ResultTys, Ops, NumOps);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL,
+ const std::vector<MVT> &ResultTys,
+ const SDValue *Ops, unsigned NumOps) {
+ return getNode(Opcode, DL, getNodeValueTypes(ResultTys), ResultTys.size(),
Ops, NumOps);
}
SDValue SelectionDAG::getNode(unsigned Opcode,
const MVT *VTs, unsigned NumVTs,
const SDValue *Ops, unsigned NumOps) {
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), VTs, NumVTs, Ops, NumOps);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL,
+ const MVT *VTs, unsigned NumVTs,
+ const SDValue *Ops, unsigned NumOps) {
if (NumVTs == 1)
- return getNode(Opcode, VTs[0], Ops, NumOps);
- return getNode(Opcode, makeVTList(VTs, NumVTs), Ops, NumOps);
+ return getNode(Opcode, DL, VTs[0], Ops, NumOps);
+ return getNode(Opcode, DL, makeVTList(VTs, NumVTs), Ops, NumOps);
}
SDValue SelectionDAG::getNode(unsigned Opcode, SDVTList VTList,
const SDValue *Ops, unsigned NumOps) {
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), VTList, Ops, NumOps);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL, SDVTList VTList,
+ const SDValue *Ops, unsigned NumOps) {
if (VTList.NumVTs == 1)
- return getNode(Opcode, VTList.VTs[0], Ops, NumOps);
+ return getNode(Opcode, DL, VTList.VTs[0], Ops, NumOps);
switch (Opcode) {
// FIXME: figure out how to safely handle things like
case ISD::SHL_PARTS:
if (N3.getOpcode() == ISD::SIGN_EXTEND_INREG &&
cast<VTSDNode>(N3.getOperand(1))->getVT() != MVT::i1)
- return getNode(Opcode, VT, N1, N2, N3.getOperand(0));
+ return getNode(Opcode, DL, VT, N1, N2, N3.getOperand(0));
else if (N3.getOpcode() == ISD::AND)
if (ConstantSDNode *AndRHS = dyn_cast<ConstantSDNode>(N3.getOperand(1))) {
// If the and is only masking out bits that cannot effect the shift,
// eliminate the and.
unsigned NumBits = VT.getSizeInBits()*2;
if ((AndRHS->getValue() & (NumBits-1)) == NumBits-1)
- return getNode(Opcode, VT, N1, N2, N3.getOperand(0));
+ return getNode(Opcode, DL, VT, N1, N2, N3.getOperand(0));
}
break;
#endif
return SDValue(E, 0);
if (NumOps == 1) {
N = NodeAllocator.Allocate<UnarySDNode>();
- new (N) UnarySDNode(Opcode, VTList, Ops[0]);
+ new (N) UnarySDNode(Opcode, DL, VTList, Ops[0]);
} else if (NumOps == 2) {
N = NodeAllocator.Allocate<BinarySDNode>();
- new (N) BinarySDNode(Opcode, VTList, Ops[0], Ops[1]);
+ new (N) BinarySDNode(Opcode, DL, VTList, Ops[0], Ops[1]);
} else if (NumOps == 3) {
N = NodeAllocator.Allocate<TernarySDNode>();
- new (N) TernarySDNode(Opcode, VTList, Ops[0], Ops[1], Ops[2]);
+ new (N) TernarySDNode(Opcode, DL, VTList, Ops[0], Ops[1], Ops[2]);
} else {
N = NodeAllocator.Allocate<SDNode>();
- new (N) SDNode(Opcode, VTList, Ops, NumOps);
+ new (N) SDNode(Opcode, DL, VTList, Ops, NumOps);
}
CSEMap.InsertNode(N, IP);
} else {
if (NumOps == 1) {
N = NodeAllocator.Allocate<UnarySDNode>();
- new (N) UnarySDNode(Opcode, VTList, Ops[0]);
+ new (N) UnarySDNode(Opcode, DL, VTList, Ops[0]);
} else if (NumOps == 2) {
N = NodeAllocator.Allocate<BinarySDNode>();
- new (N) BinarySDNode(Opcode, VTList, Ops[0], Ops[1]);
+ new (N) BinarySDNode(Opcode, DL, VTList, Ops[0], Ops[1]);
} else if (NumOps == 3) {
N = NodeAllocator.Allocate<TernarySDNode>();
- new (N) TernarySDNode(Opcode, VTList, Ops[0], Ops[1], Ops[2]);
+ new (N) TernarySDNode(Opcode, DL, VTList, Ops[0], Ops[1], Ops[2]);
} else {
N = NodeAllocator.Allocate<SDNode>();
- new (N) SDNode(Opcode, VTList, Ops, NumOps);
+ new (N) SDNode(Opcode, DL, VTList, Ops, NumOps);
}
}
AllNodes.push_back(N);
}
SDValue SelectionDAG::getNode(unsigned Opcode, SDVTList VTList) {
- return getNode(Opcode, VTList, 0, 0);
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), VTList);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL, SDVTList VTList) {
+ return getNode(Opcode, DL, VTList, 0, 0);
}
SDValue SelectionDAG::getNode(unsigned Opcode, SDVTList VTList,
- SDValue N1) {
+ SDValue N1) {
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), VTList, N1);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL, SDVTList VTList,
+ SDValue N1) {
SDValue Ops[] = { N1 };
- return getNode(Opcode, VTList, Ops, 1);
+ return getNode(Opcode, DL, VTList, Ops, 1);
}
SDValue SelectionDAG::getNode(unsigned Opcode, SDVTList VTList,
SDValue N1, SDValue N2) {
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), VTList, N1, N2);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL, SDVTList VTList,
+ SDValue N1, SDValue N2) {
SDValue Ops[] = { N1, N2 };
- return getNode(Opcode, VTList, Ops, 2);
+ return getNode(Opcode, DL, VTList, Ops, 2);
}
SDValue SelectionDAG::getNode(unsigned Opcode, SDVTList VTList,
SDValue N1, SDValue N2, SDValue N3) {
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), VTList, N1, N2, N3);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL, SDVTList VTList,
+ SDValue N1, SDValue N2, SDValue N3) {
SDValue Ops[] = { N1, N2, N3 };
- return getNode(Opcode, VTList, Ops, 3);
+ return getNode(Opcode, DL, VTList, Ops, 3);
}
SDValue SelectionDAG::getNode(unsigned Opcode, SDVTList VTList,
SDValue N1, SDValue N2, SDValue N3,
SDValue N4) {
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), VTList, N1, N2, N3, N4);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL, SDVTList VTList,
+ SDValue N1, SDValue N2, SDValue N3,
+ SDValue N4) {
SDValue Ops[] = { N1, N2, N3, N4 };
- return getNode(Opcode, VTList, Ops, 4);
+ return getNode(Opcode, DL, VTList, Ops, 4);
}
SDValue SelectionDAG::getNode(unsigned Opcode, SDVTList VTList,
SDValue N1, SDValue N2, SDValue N3,
SDValue N4, SDValue N5) {
+ return getNode(Opcode, DebugLoc::getUnknownLoc(), VTList, N1, N2, N3, N4, N5);
+}
+
+SDValue SelectionDAG::getNode(unsigned Opcode, DebugLoc DL, SDVTList VTList,
+ SDValue N1, SDValue N2, SDValue N3,
+ SDValue N4, SDValue N5) {
SDValue Ops[] = { N1, N2, N3, N4, N5 };
- return getNode(Opcode, VTList, Ops, 5);
+ return getNode(Opcode, DL, VTList, Ops, 5);
}
SDVTList SelectionDAG::getVTList(MVT VT) {
return Result;
}
+SDVTList SelectionDAG::getVTList(MVT VT1, MVT VT2, MVT VT3, MVT VT4) {
+ for (std::vector<SDVTList>::reverse_iterator I = VTList.rbegin(),
+ E = VTList.rend(); I != E; ++I)
+ if (I->NumVTs == 4 && I->VTs[0] == VT1 && I->VTs[1] == VT2 &&
+ I->VTs[2] == VT3 && I->VTs[3] == VT4)
+ return *I;
+
+ MVT *Array = Allocator.Allocate<MVT>(3);
+ Array[0] = VT1;
+ Array[1] = VT2;
+ Array[2] = VT3;
+ Array[3] = VT4;
+ SDVTList Result = makeVTList(Array, 4);
+ VTList.push_back(Result);
+ return Result;
+}
+
SDVTList SelectionDAG::getVTList(const MVT *VTs, unsigned NumVTs) {
switch (NumVTs) {
case 0: assert(0 && "Cannot have nodes without results!");
InsertPos = 0;
// Now we update the operands.
- N->OperandList[0].getVal()->removeUser(0, N);
- N->OperandList[0] = Op;
- N->OperandList[0].setUser(N);
- Op.getNode()->addUser(0, N);
+ N->OperandList[0].set(Op);
// If this gets put into a CSE map, add it.
if (InsertPos) CSEMap.InsertNode(N, InsertPos);
InsertPos = 0;
// Now we update the operands.
- if (N->OperandList[0] != Op1) {
- N->OperandList[0].getVal()->removeUser(0, N);
- N->OperandList[0] = Op1;
- N->OperandList[0].setUser(N);
- Op1.getNode()->addUser(0, N);
- }
- if (N->OperandList[1] != Op2) {
- N->OperandList[1].getVal()->removeUser(1, N);
- N->OperandList[1] = Op2;
- N->OperandList[1].setUser(N);
- Op2.getNode()->addUser(1, N);
- }
+ if (N->OperandList[0] != Op1)
+ N->OperandList[0].set(Op1);
+ if (N->OperandList[1] != Op2)
+ N->OperandList[1].set(Op2);
// If this gets put into a CSE map, add it.
if (InsertPos) CSEMap.InsertNode(N, InsertPos);
InsertPos = 0;
// Now we update the operands.
- for (unsigned i = 0; i != NumOps; ++i) {
- if (N->OperandList[i] != Ops[i]) {
- N->OperandList[i].getVal()->removeUser(i, N);
- N->OperandList[i] = Ops[i];
- N->OperandList[i].setUser(N);
- Ops[i].getNode()->addUser(i, N);
- }
- }
+ for (unsigned i = 0; i != NumOps; ++i)
+ if (N->OperandList[i] != Ops[i])
+ N->OperandList[i].set(Ops[i]);
// If this gets put into a CSE map, add it.
if (InsertPos) CSEMap.InsertNode(N, InsertPos);
void SDNode::DropOperands() {
// Unlike the code in MorphNodeTo that does this, we don't need to
// watch for dead nodes here.
- for (op_iterator I = op_begin(), E = op_end(); I != E; ++I)
- I->getVal()->removeUser(std::distance(op_begin(), I), this);
-
- NumOperands = 0;
+ for (op_iterator I = op_begin(), E = op_end(); I != E; ) {
+ SDUse &Use = *I++;
+ Use.set(SDValue());
+ }
}
/// SelectNodeTo - These are wrappers around MorphNodeTo that accept a
return SelectNodeTo(N, MachineOpc, VTs, Ops, NumOps);
}
+SDNode *SelectionDAG::SelectNodeTo(SDNode *N, unsigned MachineOpc,
+ MVT VT1, MVT VT2, MVT VT3, MVT VT4,
+ const SDValue *Ops, unsigned NumOps) {
+ SDVTList VTs = getVTList(VT1, VT2, VT3, VT4);
+ return SelectNodeTo(N, MachineOpc, VTs, Ops, NumOps);
+}
+
SDNode *SelectionDAG::SelectNodeTo(SDNode *N, unsigned MachineOpc,
MVT VT1, MVT VT2,
SDValue Op1) {
return SelectNodeTo(N, MachineOpc, VTs, Ops, 3);
}
+SDNode *SelectionDAG::SelectNodeTo(SDNode *N, unsigned MachineOpc,
+ MVT VT1, MVT VT2, MVT VT3,
+ SDValue Op1, SDValue Op2,
+ SDValue Op3) {
+ SDVTList VTs = getVTList(VT1, VT2, VT3);
+ SDValue Ops[] = { Op1, Op2, Op3 };
+ return SelectNodeTo(N, MachineOpc, VTs, Ops, 3);
+}
+
SDNode *SelectionDAG::SelectNodeTo(SDNode *N, unsigned MachineOpc,
SDVTList VTs, const SDValue *Ops,
unsigned NumOps) {
// Clear the operands list, updating used nodes to remove this from their
// use list. Keep track of any operands that become dead as a result.
SmallPtrSet<SDNode*, 16> DeadNodeSet;
- for (SDNode::op_iterator B = N->op_begin(), I = B, E = N->op_end();
- I != E; ++I) {
- SDNode *Used = I->getVal();
- Used->removeUser(std::distance(B, I), N);
+ for (SDNode::op_iterator I = N->op_begin(), E = N->op_end(); I != E; ) {
+ SDUse &Use = *I++;
+ SDNode *Used = Use.getNode();
+ Use.set(SDValue());
if (Used->use_empty())
DeadNodeSet.insert(Used);
}
if (NumOps > N->NumOperands) {
if (N->OperandsNeedDelete)
delete[] N->OperandList;
+
if (N->isMachineOpcode()) {
// We're creating a final node that will live unmorphed for the
// remainder of the current SelectionDAG iteration, so we can allocate
// Assign the new operands.
N->NumOperands = NumOps;
for (unsigned i = 0, e = NumOps; i != e; ++i) {
- N->OperandList[i] = Ops[i];
N->OperandList[i].setUser(N);
- SDNode *ToUse = N->OperandList[i].getVal();
- ToUse->addUser(i, N);
+ N->OperandList[i].setInitial(Ops[i]);
}
// Delete any nodes that are still dead after adding the uses for the
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT VT) {
return getNode(~Opcode, VT).getNode();
}
+SDNode *SelectionDAG::getTargetNode(unsigned Opcode, DebugLoc dl, MVT VT) {
+ return getNode(~Opcode, dl, VT).getNode();
+}
+
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT VT, SDValue Op1) {
return getNode(~Opcode, VT, Op1).getNode();
}
+SDNode *SelectionDAG::getTargetNode(unsigned Opcode, DebugLoc dl, MVT VT,
+ SDValue Op1) {
+ return getNode(~Opcode, dl, VT, Op1).getNode();
+}
+
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT VT,
SDValue Op1, SDValue Op2) {
return getNode(~Opcode, VT, Op1, Op2).getNode();
}
+SDNode *SelectionDAG::getTargetNode(unsigned Opcode, DebugLoc dl, MVT VT,
+ SDValue Op1, SDValue Op2) {
+ return getNode(~Opcode, dl, VT, Op1, Op2).getNode();
+}
+
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT VT,
SDValue Op1, SDValue Op2,
SDValue Op3) {
return getNode(~Opcode, VT, Op1, Op2, Op3).getNode();
}
+SDNode *SelectionDAG::getTargetNode(unsigned Opcode, DebugLoc dl, MVT VT,
+ SDValue Op1, SDValue Op2,
+ SDValue Op3) {
+ return getNode(~Opcode, dl, VT, Op1, Op2, Op3).getNode();
+}
+
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT VT,
const SDValue *Ops, unsigned NumOps) {
return getNode(~Opcode, VT, Ops, NumOps).getNode();
}
+SDNode *SelectionDAG::getTargetNode(unsigned Opcode, DebugLoc dl, MVT VT,
+ const SDValue *Ops, unsigned NumOps) {
+ return getNode(~Opcode, dl, VT, Ops, NumOps).getNode();
+}
+
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT VT1, MVT VT2) {
const MVT *VTs = getNodeValueTypes(VT1, VT2);
SDValue Op;
return getNode(~Opcode, VTs, 2, &Op, 0).getNode();
}
+SDNode *SelectionDAG::getTargetNode(unsigned Opcode, DebugLoc dl,
+ MVT VT1, MVT VT2) {
+ const MVT *VTs = getNodeValueTypes(VT1, VT2);
+ SDValue Op;
+ return getNode(~Opcode, dl, VTs, 2, &Op, 0).getNode();
+}
+
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT VT1,
MVT VT2, SDValue Op1) {
const MVT *VTs = getNodeValueTypes(VT1, VT2);
return getNode(~Opcode, VTs, 2, &Op1, 1).getNode();
}
+SDNode *SelectionDAG::getTargetNode(unsigned Opcode, DebugLoc dl, MVT VT1,
+ MVT VT2, SDValue Op1) {
+ const MVT *VTs = getNodeValueTypes(VT1, VT2);
+ return getNode(~Opcode, dl, VTs, 2, &Op1, 1).getNode();
+}
+
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT VT1,
MVT VT2, SDValue Op1,
SDValue Op2) {
SDValue Ops[] = { Op1, Op2 };
return getNode(~Opcode, VTs, 2, Ops, 2).getNode();
}
+SDNode *SelectionDAG::getTargetNode(unsigned Opcode, DebugLoc dl, MVT VT1,
+ MVT VT2, SDValue Op1,
+ SDValue Op2) {
+ const MVT *VTs = getNodeValueTypes(VT1, VT2);
+ SDValue Ops[] = { Op1, Op2 };
+ return getNode(~Opcode, dl, VTs, 2, Ops, 2).getNode();
+}
+
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT VT1,
MVT VT2, SDValue Op1,
SDValue Op2, SDValue Op3) {
SDValue Ops[] = { Op1, Op2, Op3 };
return getNode(~Opcode, VTs, 2, Ops, 3).getNode();
}
+SDNode *SelectionDAG::getTargetNode(unsigned Opcode, DebugLoc dl, MVT VT1,
+ MVT VT2, SDValue Op1,
+ SDValue Op2, SDValue Op3) {
+ const MVT *VTs = getNodeValueTypes(VT1, VT2);
+ SDValue Ops[] = { Op1, Op2, Op3 };
+ return getNode(~Opcode, dl, VTs, 2, Ops, 3).getNode();
+}
+
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT VT1, MVT VT2,
const SDValue *Ops, unsigned NumOps) {
const MVT *VTs = getNodeValueTypes(VT1, VT2);
return getNode(~Opcode, VTs, 2, Ops, NumOps).getNode();
}
+SDNode *SelectionDAG::getTargetNode(unsigned Opcode, DebugLoc dl,
+ MVT VT1, MVT VT2,
+ const SDValue *Ops, unsigned NumOps) {
+ const MVT *VTs = getNodeValueTypes(VT1, VT2);
+ return getNode(~Opcode, dl, VTs, 2, Ops, NumOps).getNode();
+}
+
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT VT1, MVT VT2, MVT VT3,
SDValue Op1, SDValue Op2) {
const MVT *VTs = getNodeValueTypes(VT1, VT2, VT3);
SDValue Ops[] = { Op1, Op2 };
return getNode(~Opcode, VTs, 3, Ops, 2).getNode();
}
+SDNode *SelectionDAG::getTargetNode(unsigned Opcode, DebugLoc dl,
+ MVT VT1, MVT VT2, MVT VT3,
+ SDValue Op1, SDValue Op2) {
+ const MVT *VTs = getNodeValueTypes(VT1, VT2, VT3);
+ SDValue Ops[] = { Op1, Op2 };
+ return getNode(~Opcode, dl, VTs, 3, Ops, 2).getNode();
+}
+
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT VT1, MVT VT2, MVT VT3,
SDValue Op1, SDValue Op2,
SDValue Op3) {
SDValue Ops[] = { Op1, Op2, Op3 };
return getNode(~Opcode, VTs, 3, Ops, 3).getNode();
}
+SDNode *SelectionDAG::getTargetNode(unsigned Opcode, DebugLoc dl,
+ MVT VT1, MVT VT2, MVT VT3,
+ SDValue Op1, SDValue Op2,
+ SDValue Op3) {
+ const MVT *VTs = getNodeValueTypes(VT1, VT2, VT3);
+ SDValue Ops[] = { Op1, Op2, Op3 };
+ return getNode(~Opcode, dl, VTs, 3, Ops, 3).getNode();
+}
+
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT VT1, MVT VT2, MVT VT3,
const SDValue *Ops, unsigned NumOps) {
const MVT *VTs = getNodeValueTypes(VT1, VT2, VT3);
return getNode(~Opcode, VTs, 3, Ops, NumOps).getNode();
}
+SDNode *SelectionDAG::getTargetNode(unsigned Opcode, DebugLoc dl,
+ MVT VT1, MVT VT2, MVT VT3,
+ const SDValue *Ops, unsigned NumOps) {
+ const MVT *VTs = getNodeValueTypes(VT1, VT2, VT3);
+ return getNode(~Opcode, VTs, 3, Ops, NumOps).getNode();
+}
+
SDNode *SelectionDAG::getTargetNode(unsigned Opcode, MVT VT1,
MVT VT2, MVT VT3, MVT VT4,
const SDValue *Ops, unsigned NumOps) {
const MVT *VTs = getNodeValueTypes(VTList);
return getNode(~Opcode, VTs, 4, Ops, NumOps).getNode();
}
+SDNode *SelectionDAG::getTargetNode(unsigned Opcode, DebugLoc dl, MVT VT1,
+ MVT VT2, MVT VT3, MVT VT4,
+ const SDValue *Ops, unsigned NumOps) {
+ std::vector<MVT> VTList;
+ VTList.push_back(VT1);
+ VTList.push_back(VT2);
+ VTList.push_back(VT3);
+ VTList.push_back(VT4);
+ const MVT *VTs = getNodeValueTypes(VTList);
+ return getNode(~Opcode, dl, VTs, 4, Ops, NumOps).getNode();
+}
+
SDNode *SelectionDAG::getTargetNode(unsigned Opcode,
const std::vector<MVT> &ResultTys,
const SDValue *Ops, unsigned NumOps) {
return getNode(~Opcode, VTs, ResultTys.size(),
Ops, NumOps).getNode();
}
+SDNode *SelectionDAG::getTargetNode(unsigned Opcode, DebugLoc dl,
+ const std::vector<MVT> &ResultTys,
+ const SDValue *Ops, unsigned NumOps) {
+ const MVT *VTs = getNodeValueTypes(ResultTys);
+ return getNode(~Opcode, dl, VTs, ResultTys.size(),
+ Ops, NumOps).getNode();
+}
/// getNodeIfExists - Get the specified node if it's already available, or
/// else return NULL.
return NULL;
}
-
/// ReplaceAllUsesWith - Modify anything using 'From' to use 'To' instead.
/// This can cause recursive merging of nodes in the DAG.
///
"Cannot replace with this method!");
assert(From != To.getNode() && "Cannot replace uses of with self");
- while (!From->use_empty()) {
- SDNode::use_iterator UI = From->use_begin();
- SDNode *U = *UI;
+ // Iterate over all the existing uses of From. New uses will be added
+ // to the beginning of the use list, which we avoid visiting.
+ // This specifically avoids visiting uses of From that arise while the
+ // replacement is happening, because any such uses would be the result
+ // of CSE: If an existing node looks like From after one of its operands
+ // is replaced by To, we don't want to replace of all its users with To
+ // too. See PR3018 for more info.
+ SDNode::use_iterator UI = From->use_begin(), UE = From->use_end();
+ while (UI != UE) {
+ SDNode *User = *UI;
// This node is about to morph, remove its old self from the CSE maps.
- RemoveNodeFromCSEMaps(U);
- int operandNum = 0;
- for (SDNode::op_iterator I = U->op_begin(), E = U->op_end();
- I != E; ++I, ++operandNum)
- if (I->getVal() == From) {
- From->removeUser(operandNum, U);
- *I = To;
- I->setUser(U);
- To.getNode()->addUser(operandNum, U);
- }
-
- // Now that we have modified U, add it back to the CSE maps. If it already
- // exists there, recursively merge the results together.
- if (SDNode *Existing = AddNonLeafNodeToCSEMaps(U)) {
- ReplaceAllUsesWith(U, Existing, UpdateListener);
- // U is now dead. Inform the listener if it exists and delete it.
- if (UpdateListener)
- UpdateListener->NodeDeleted(U, Existing);
- DeleteNodeNotInCSEMaps(U);
- } else {
- // If the node doesn't already exist, we updated it. Inform a listener if
- // it exists.
- if (UpdateListener)
- UpdateListener->NodeUpdated(U);
- }
+ RemoveNodeFromCSEMaps(User);
+
+ // A user can appear in a use list multiple times, and when this
+ // happens the uses are usually next to each other in the list.
+ // To help reduce the number of CSE recomputations, process all
+ // the uses of this user that we can find this way.
+ do {
+ SDUse &Use = UI.getUse();
+ ++UI;
+ Use.set(To);
+ } while (UI != UE && *UI == User);
+
+ // Now that we have modified User, add it back to the CSE maps. If it
+ // already exists there, recursively merge the results together.
+ AddModifiedNodeToCSEMaps(User, UpdateListener);
}
}
if (From == To)
return;
- while (!From->use_empty()) {
- SDNode::use_iterator UI = From->use_begin();
- SDNode *U = *UI;
+ // Iterate over just the existing users of From. See the comments in
+ // the ReplaceAllUsesWith above.
+ SDNode::use_iterator UI = From->use_begin(), UE = From->use_end();
+ while (UI != UE) {
+ SDNode *User = *UI;
// This node is about to morph, remove its old self from the CSE maps.
- RemoveNodeFromCSEMaps(U);
- int operandNum = 0;
- for (SDNode::op_iterator I = U->op_begin(), E = U->op_end();
- I != E; ++I, ++operandNum)
- if (I->getVal() == From) {
- From->removeUser(operandNum, U);
- I->getSDValue().setNode(To);
- To->addUser(operandNum, U);
- }
+ RemoveNodeFromCSEMaps(User);
- // Now that we have modified U, add it back to the CSE maps. If it already
- // exists there, recursively merge the results together.
- if (SDNode *Existing = AddNonLeafNodeToCSEMaps(U)) {
- ReplaceAllUsesWith(U, Existing, UpdateListener);
- // U is now dead. Inform the listener if it exists and delete it.
- if (UpdateListener)
- UpdateListener->NodeDeleted(U, Existing);
- DeleteNodeNotInCSEMaps(U);
- } else {
- // If the node doesn't already exist, we updated it. Inform a listener if
- // it exists.
- if (UpdateListener)
- UpdateListener->NodeUpdated(U);
- }
+ // A user can appear in a use list multiple times, and when this
+ // happens the uses are usually next to each other in the list.
+ // To help reduce the number of CSE recomputations, process all
+ // the uses of this user that we can find this way.
+ do {
+ SDUse &Use = UI.getUse();
+ ++UI;
+ Use.setNode(To);
+ } while (UI != UE && *UI == User);
+
+ // Now that we have modified User, add it back to the CSE maps. If it
+ // already exists there, recursively merge the results together.
+ AddModifiedNodeToCSEMaps(User, UpdateListener);
}
}
if (From->getNumValues() == 1) // Handle the simple case efficiently.
return ReplaceAllUsesWith(SDValue(From, 0), To[0], UpdateListener);
- while (!From->use_empty()) {
- SDNode::use_iterator UI = From->use_begin();
- SDNode *U = *UI;
+ // Iterate over just the existing users of From. See the comments in
+ // the ReplaceAllUsesWith above.
+ SDNode::use_iterator UI = From->use_begin(), UE = From->use_end();
+ while (UI != UE) {
+ SDNode *User = *UI;
// This node is about to morph, remove its old self from the CSE maps.
- RemoveNodeFromCSEMaps(U);
- int operandNum = 0;
- for (SDNode::op_iterator I = U->op_begin(), E = U->op_end();
- I != E; ++I, ++operandNum)
- if (I->getVal() == From) {
- const SDValue &ToOp = To[I->getSDValue().getResNo()];
- From->removeUser(operandNum, U);
- *I = ToOp;
- I->setUser(U);
- ToOp.getNode()->addUser(operandNum, U);
- }
+ RemoveNodeFromCSEMaps(User);
- // Now that we have modified U, add it back to the CSE maps. If it already
- // exists there, recursively merge the results together.
- if (SDNode *Existing = AddNonLeafNodeToCSEMaps(U)) {
- ReplaceAllUsesWith(U, Existing, UpdateListener);
- // U is now dead. Inform the listener if it exists and delete it.
- if (UpdateListener)
- UpdateListener->NodeDeleted(U, Existing);
- DeleteNodeNotInCSEMaps(U);
- } else {
- // If the node doesn't already exist, we updated it. Inform a listener if
- // it exists.
- if (UpdateListener)
- UpdateListener->NodeUpdated(U);
- }
+ // A user can appear in a use list multiple times, and when this
+ // happens the uses are usually next to each other in the list.
+ // To help reduce the number of CSE recomputations, process all
+ // the uses of this user that we can find this way.
+ do {
+ SDUse &Use = UI.getUse();
+ const SDValue &ToOp = To[Use.getResNo()];
+ ++UI;
+ Use.set(ToOp);
+ } while (UI != UE && *UI == User);
+
+ // Now that we have modified User, add it back to the CSE maps. If it
+ // already exists there, recursively merge the results together.
+ AddModifiedNodeToCSEMaps(User, UpdateListener);
}
}
/// ReplaceAllUsesOfValueWith - Replace any uses of From with To, leaving
-/// uses of other values produced by From.getVal() alone. The Deleted vector is
-/// handled the same way as for ReplaceAllUsesWith.
+/// uses of other values produced by From.getNode() alone. The Deleted
+/// vector is handled the same way as for ReplaceAllUsesWith.
void SelectionDAG::ReplaceAllUsesOfValueWith(SDValue From, SDValue To,
DAGUpdateListener *UpdateListener){
// Handle the really simple, really trivial case efficiently.
return;
}
- // Get all of the users of From.getNode(). We want these in a nice,
- // deterministically ordered and uniqued set, so we use a SmallSetVector.
- SmallSetVector<SDNode*, 16> Users(From.getNode()->use_begin(), From.getNode()->use_end());
+ // Iterate over just the existing users of From. See the comments in
+ // the ReplaceAllUsesWith above.
+ SDNode::use_iterator UI = From.getNode()->use_begin(),
+ UE = From.getNode()->use_end();
+ while (UI != UE) {
+ SDNode *User = *UI;
+ bool UserRemovedFromCSEMaps = false;
+
+ // A user can appear in a use list multiple times, and when this
+ // happens the uses are usually next to each other in the list.
+ // To help reduce the number of CSE recomputations, process all
+ // the uses of this user that we can find this way.
+ do {
+ SDUse &Use = UI.getUse();
+
+ // Skip uses of different values from the same node.
+ if (Use.getResNo() != From.getResNo()) {
+ ++UI;
+ continue;
+ }
- while (!Users.empty()) {
- // We know that this user uses some value of From. If it is the right
- // value, update it.
- SDNode *User = Users.back();
- Users.pop_back();
-
- // Scan for an operand that matches From.
- SDNode::op_iterator Op = User->op_begin(), E = User->op_end();
- for (; Op != E; ++Op)
- if (*Op == From) break;
-
- // If there are no matches, the user must use some other result of From.
- if (Op == E) continue;
-
- // Okay, we know this user needs to be updated. Remove its old self
- // from the CSE maps.
- RemoveNodeFromCSEMaps(User);
-
- // Update all operands that match "From" in case there are multiple uses.
- for (; Op != E; ++Op) {
- if (*Op == From) {
- From.getNode()->removeUser(Op-User->op_begin(), User);
- *Op = To;
- Op->setUser(User);
- To.getNode()->addUser(Op-User->op_begin(), User);
+ // If this node hasn't been modified yet, it's still in the CSE maps,
+ // so remove its old self from the CSE maps.
+ if (!UserRemovedFromCSEMaps) {
+ RemoveNodeFromCSEMaps(User);
+ UserRemovedFromCSEMaps = true;
}
- }
-
+
+ ++UI;
+ Use.set(To);
+ } while (UI != UE && *UI == User);
+
+ // We are iterating over all uses of the From node, so if a use
+ // doesn't use the specific value, no changes are made.
+ if (!UserRemovedFromCSEMaps)
+ continue;
+
// Now that we have modified User, add it back to the CSE maps. If it
// already exists there, recursively merge the results together.
- SDNode *Existing = AddNonLeafNodeToCSEMaps(User);
- if (!Existing) {
- if (UpdateListener) UpdateListener->NodeUpdated(User);
- continue; // Continue on to next user.
- }
-
- // If there was already an existing matching node, use ReplaceAllUsesWith
- // to replace the dead one with the existing one. This can cause
- // recursive merging of other unrelated nodes down the line.
- ReplaceAllUsesWith(User, Existing, UpdateListener);
-
- // User is now dead. Notify a listener if present.
- if (UpdateListener) UpdateListener->NodeDeleted(User, Existing);
- DeleteNodeNotInCSEMaps(User);
+ AddModifiedNodeToCSEMaps(User, UpdateListener);
+ }
+}
+
+namespace {
+ /// UseMemo - This class is used by SelectionDAG::ReplaceAllUsesOfValuesWith
+ /// to record information about a use.
+ struct UseMemo {
+ SDNode *User;
+ unsigned Index;
+ SDUse *Use;
+ };
+
+ /// operator< - Sort Memos by User.
+ bool operator<(const UseMemo &L, const UseMemo &R) {
+ return (intptr_t)L.User < (intptr_t)R.User;
}
}
/// ReplaceAllUsesOfValuesWith - Replace any uses of From with To, leaving
-/// uses of other values produced by From.getVal() alone. The same value may
-/// appear in both the From and To list. The Deleted vector is
+/// uses of other values produced by From.getNode() alone. The same value
+/// may appear in both the From and To list. The Deleted vector is
/// handled the same way as for ReplaceAllUsesWith.
void SelectionDAG::ReplaceAllUsesOfValuesWith(const SDValue *From,
const SDValue *To,
if (Num == 1)
return ReplaceAllUsesOfValueWith(*From, *To, UpdateListener);
- SmallVector<std::pair<SDNode *, unsigned>, 16> Users;
- for (unsigned i = 0; i != Num; ++i)
- for (SDNode::use_iterator UI = From[i].getNode()->use_begin(),
- E = From[i].getNode()->use_end(); UI != E; ++UI)
- Users.push_back(std::make_pair(*UI, i));
+ // Read up all the uses and make records of them. This helps
+ // processing new uses that are introduced during the
+ // replacement process.
+ SmallVector<UseMemo, 4> Uses;
+ for (unsigned i = 0; i != Num; ++i) {
+ unsigned FromResNo = From[i].getResNo();
+ SDNode *FromNode = From[i].getNode();
+ for (SDNode::use_iterator UI = FromNode->use_begin(),
+ E = FromNode->use_end(); UI != E; ++UI) {
+ SDUse &Use = UI.getUse();
+ if (Use.getResNo() == FromResNo) {
+ UseMemo Memo = { *UI, i, &Use };
+ Uses.push_back(Memo);
+ }
+ }
+ }
+
+ // Sort the uses, so that all the uses from a given User are together.
+ std::sort(Uses.begin(), Uses.end());
- while (!Users.empty()) {
+ for (unsigned UseIndex = 0, UseIndexEnd = Uses.size();
+ UseIndex != UseIndexEnd; ) {
// We know that this user uses some value of From. If it is the right
// value, update it.
- SDNode *User = Users.back().first;
- unsigned i = Users.back().second;
- Users.pop_back();
-
- // Scan for an operand that matches From.
- SDNode::op_iterator Op = User->op_begin(), E = User->op_end();
- for (; Op != E; ++Op)
- if (*Op == From[i]) break;
-
- // If there are no matches, the user must use some other result of From.
- if (Op == E) continue;
-
- // Okay, we know this user needs to be updated. Remove its old self
- // from the CSE maps.
+ SDNode *User = Uses[UseIndex].User;
+
+ // This node is about to morph, remove its old self from the CSE maps.
RemoveNodeFromCSEMaps(User);
-
- // Update all operands that match "From" in case there are multiple uses.
- for (; Op != E; ++Op) {
- if (*Op == From[i]) {
- From[i].getNode()->removeUser(Op-User->op_begin(), User);
- *Op = To[i];
- Op->setUser(User);
- To[i].getNode()->addUser(Op-User->op_begin(), User);
- }
- }
-
+
+ // The Uses array is sorted, so all the uses for a given User
+ // are next to each other in the list.
+ // To help reduce the number of CSE recomputations, process all
+ // the uses of this user that we can find this way.
+ do {
+ unsigned i = Uses[UseIndex].Index;
+ SDUse &Use = *Uses[UseIndex].Use;
+ ++UseIndex;
+
+ Use.set(To[i]);
+ } while (UseIndex != UseIndexEnd && Uses[UseIndex].User == User);
+
// Now that we have modified User, add it back to the CSE maps. If it
// already exists there, recursively merge the results together.
- SDNode *Existing = AddNonLeafNodeToCSEMaps(User);
- if (!Existing) {
- if (UpdateListener) UpdateListener->NodeUpdated(User);
- continue; // Continue on to next user.
- }
-
- // If there was already an existing matching node, use ReplaceAllUsesWith
- // to replace the dead one with the existing one. This can cause
- // recursive merging of other unrelated nodes down the line.
- ReplaceAllUsesWith(User, Existing, UpdateListener);
-
- // User is now dead. Notify a listener if present.
- if (UpdateListener) UpdateListener->NodeDeleted(User, Existing);
- DeleteNodeNotInCSEMaps(User);
+ AddModifiedNodeToCSEMaps(User, UpdateListener);
}
}
// it is at the end of the list.
allnodes_iterator SortedPos = allnodes_begin();
- // Visit all the nodes. Add nodes with no operands to the TopOrder result
- // array immediately. Annotate nodes that do have operands with their
+ // Visit all the nodes. Move nodes with no operands to the front of
+ // the list immediately. Annotate nodes that do have operands with their
// operand count. Before we do this, the Node Id fields of the nodes
// may contain arbitrary values. After, the Node Id fields for nodes
// before SortedPos will contain the topological sort index, and the
"Last node in topologic sort has unexpected id!");
assert(AllNodes.back().use_empty() &&
"Last node in topologic sort has users!");
- assert(DAGSize == allnodes_size() && "TopOrder result count mismatch!");
+ assert(DAGSize == allnodes_size() && "Node count mismatch!");
return DAGSize;
}
// SDNode Class
//===----------------------------------------------------------------------===//
-// Out-of-line virtual method to give class a home.
-void SDNode::ANCHOR() {}
-void UnarySDNode::ANCHOR() {}
-void BinarySDNode::ANCHOR() {}
-void TernarySDNode::ANCHOR() {}
-void HandleSDNode::ANCHOR() {}
-void ConstantSDNode::ANCHOR() {}
-void ConstantFPSDNode::ANCHOR() {}
-void GlobalAddressSDNode::ANCHOR() {}
-void FrameIndexSDNode::ANCHOR() {}
-void JumpTableSDNode::ANCHOR() {}
-void ConstantPoolSDNode::ANCHOR() {}
-void BasicBlockSDNode::ANCHOR() {}
-void SrcValueSDNode::ANCHOR() {}
-void MemOperandSDNode::ANCHOR() {}
-void RegisterSDNode::ANCHOR() {}
-void DbgStopPointSDNode::ANCHOR() {}
-void LabelSDNode::ANCHOR() {}
-void ExternalSymbolSDNode::ANCHOR() {}
-void CondCodeSDNode::ANCHOR() {}
-void ARG_FLAGSSDNode::ANCHOR() {}
-void VTSDNode::ANCHOR() {}
-void MemSDNode::ANCHOR() {}
-void LoadSDNode::ANCHOR() {}
-void StoreSDNode::ANCHOR() {}
-void AtomicSDNode::ANCHOR() {}
-void CallSDNode::ANCHOR() {}
-
HandleSDNode::~HandleSDNode() {
DropOperands();
}
GlobalAddressSDNode::GlobalAddressSDNode(bool isTarget, const GlobalValue *GA,
- MVT VT, int o)
+ MVT VT, int64_t o)
: SDNode(isa<GlobalVariable>(GA) &&
cast<GlobalVariable>(GA)->isThreadLocal() ?
// Thread Local
assert(isVolatile() == vol && "Volatile representation error!");
}
+MemSDNode::MemSDNode(unsigned Opc, SDVTList VTs, const SDValue *Ops,
+ unsigned NumOps, MVT memvt, const Value *srcValue,
+ int SVO, unsigned alignment, bool vol)
+ : SDNode(Opc, VTs, Ops, NumOps),
+ MemoryVT(memvt), SrcValue(srcValue), SVOffset(SVO),
+ Flags(vol | ((Log2_32(alignment) + 1) << 1)) {
+ assert(isPowerOf2_32(alignment) && "Alignment is not a power of 2!");
+ assert(getAlignment() == alignment && "Alignment representation error!");
+ assert(isVolatile() == vol && "Volatile representation error!");
+}
+
+MemSDNode::MemSDNode(unsigned Opc, DebugLoc dl, SDVTList VTs, MVT memvt,
+ const Value *srcValue, int SVO,
+ unsigned alignment, bool vol)
+ : SDNode(Opc, dl, VTs), MemoryVT(memvt), SrcValue(srcValue), SVOffset(SVO),
+ Flags(encodeMemSDNodeFlags(vol, alignment)) {
+
+ assert(isPowerOf2_32(alignment) && "Alignment is not a power of 2!");
+ assert(getAlignment() == alignment && "Alignment representation error!");
+ assert(isVolatile() == vol && "Volatile representation error!");
+}
+
+MemSDNode::MemSDNode(unsigned Opc, DebugLoc dl, SDVTList VTs,
+ const SDValue *Ops,
+ unsigned NumOps, MVT memvt, const Value *srcValue,
+ int SVO, unsigned alignment, bool vol)
+ : SDNode(Opc, dl, VTs, Ops, NumOps),
+ MemoryVT(memvt), SrcValue(srcValue), SVOffset(SVO),
+ Flags(vol | ((Log2_32(alignment) + 1) << 1)) {
+ assert(isPowerOf2_32(alignment) && "Alignment is not a power of 2!");
+ assert(getAlignment() == alignment && "Alignment representation error!");
+ assert(isVolatile() == vol && "Volatile representation error!");
+}
+
/// getMemOperand - Return a MachineMemOperand object describing the memory
/// reference performed by this memory reference.
MachineMemOperand MemSDNode::getMemOperand() const {
- int Flags;
+ int Flags = 0;
if (isa<LoadSDNode>(this))
Flags = MachineMemOperand::MOLoad;
else if (isa<StoreSDNode>(this))
Flags = MachineMemOperand::MOStore;
- else {
- assert(isa<AtomicSDNode>(this) && "Unknown MemSDNode opcode!");
+ else if (isa<AtomicSDNode>(this)) {
Flags = MachineMemOperand::MOLoad | MachineMemOperand::MOStore;
}
+ else {
+ const MemIntrinsicSDNode* MemIntrinNode = dyn_cast<MemIntrinsicSDNode>(this);
+ assert(MemIntrinNode && "Unknown MemSDNode opcode!");
+ if (MemIntrinNode->readMem()) Flags |= MachineMemOperand::MOLoad;
+ if (MemIntrinNode->writeMem()) Flags |= MachineMemOperand::MOStore;
+ }
int Size = (getMemoryVT().getSizeInBits() + 7) >> 3;
if (isVolatile()) Flags |= MachineMemOperand::MOVolatile;
// TODO: Only iterate over uses of a given value of the node
for (SDNode::use_iterator UI = use_begin(), E = use_end(); UI != E; ++UI) {
- if (UI.getUse().getSDValue().getResNo() == Value) {
+ if (UI.getUse().getResNo() == Value) {
if (NUses == 0)
return false;
--NUses;
assert(Value < getNumValues() && "Bad value!");
for (SDNode::use_iterator UI = use_begin(), E = use_end(); UI != E; ++UI)
- if (UI.getUse().getSDValue().getResNo() == Value)
+ if (UI.getUse().getResNo() == Value)
return true;
return false;
bool SDNode::isOperandOf(SDNode *N) const {
for (unsigned i = 0, e = N->NumOperands; i != e; ++i)
- if (this == N->OperandList[i].getVal())
+ if (this == N->OperandList[i].getNode())
return true;
return false;
}
return "<<Unknown Machine Node>>";
}
if (G) {
- TargetLowering &TLI = G->getTargetLoweringInfo();
+ const TargetLowering &TLI = G->getTargetLoweringInfo();
const char *Name = TLI.getTargetNodeName(getOpcode());
if (Name) return Name;
return "<<Unknown Target Node>>";
#endif
case ISD::PREFETCH: return "Prefetch";
case ISD::MEMBARRIER: return "MemBarrier";
- case ISD::ATOMIC_CMP_SWAP_8: return "AtomicCmpSwap8";
- case ISD::ATOMIC_SWAP_8: return "AtomicSwap8";
- case ISD::ATOMIC_LOAD_ADD_8: return "AtomicLoadAdd8";
- case ISD::ATOMIC_LOAD_SUB_8: return "AtomicLoadSub8";
- case ISD::ATOMIC_LOAD_AND_8: return "AtomicLoadAnd8";
- case ISD::ATOMIC_LOAD_OR_8: return "AtomicLoadOr8";
- case ISD::ATOMIC_LOAD_XOR_8: return "AtomicLoadXor8";
- case ISD::ATOMIC_LOAD_NAND_8: return "AtomicLoadNand8";
- case ISD::ATOMIC_LOAD_MIN_8: return "AtomicLoadMin8";
- case ISD::ATOMIC_LOAD_MAX_8: return "AtomicLoadMax8";
- case ISD::ATOMIC_LOAD_UMIN_8: return "AtomicLoadUMin8";
- case ISD::ATOMIC_LOAD_UMAX_8: return "AtomicLoadUMax8";
- case ISD::ATOMIC_CMP_SWAP_16: return "AtomicCmpSwap16";
- case ISD::ATOMIC_SWAP_16: return "AtomicSwap16";
- case ISD::ATOMIC_LOAD_ADD_16: return "AtomicLoadAdd16";
- case ISD::ATOMIC_LOAD_SUB_16: return "AtomicLoadSub16";
- case ISD::ATOMIC_LOAD_AND_16: return "AtomicLoadAnd16";
- case ISD::ATOMIC_LOAD_OR_16: return "AtomicLoadOr16";
- case ISD::ATOMIC_LOAD_XOR_16: return "AtomicLoadXor16";
- case ISD::ATOMIC_LOAD_NAND_16: return "AtomicLoadNand16";
- case ISD::ATOMIC_LOAD_MIN_16: return "AtomicLoadMin16";
- case ISD::ATOMIC_LOAD_MAX_16: return "AtomicLoadMax16";
- case ISD::ATOMIC_LOAD_UMIN_16: return "AtomicLoadUMin16";
- case ISD::ATOMIC_LOAD_UMAX_16: return "AtomicLoadUMax16";
- case ISD::ATOMIC_CMP_SWAP_32: return "AtomicCmpSwap32";
- case ISD::ATOMIC_SWAP_32: return "AtomicSwap32";
- case ISD::ATOMIC_LOAD_ADD_32: return "AtomicLoadAdd32";
- case ISD::ATOMIC_LOAD_SUB_32: return "AtomicLoadSub32";
- case ISD::ATOMIC_LOAD_AND_32: return "AtomicLoadAnd32";
- case ISD::ATOMIC_LOAD_OR_32: return "AtomicLoadOr32";
- case ISD::ATOMIC_LOAD_XOR_32: return "AtomicLoadXor32";
- case ISD::ATOMIC_LOAD_NAND_32: return "AtomicLoadNand32";
- case ISD::ATOMIC_LOAD_MIN_32: return "AtomicLoadMin32";
- case ISD::ATOMIC_LOAD_MAX_32: return "AtomicLoadMax32";
- case ISD::ATOMIC_LOAD_UMIN_32: return "AtomicLoadUMin32";
- case ISD::ATOMIC_LOAD_UMAX_32: return "AtomicLoadUMax32";
- case ISD::ATOMIC_CMP_SWAP_64: return "AtomicCmpSwap64";
- case ISD::ATOMIC_SWAP_64: return "AtomicSwap64";
- case ISD::ATOMIC_LOAD_ADD_64: return "AtomicLoadAdd64";
- case ISD::ATOMIC_LOAD_SUB_64: return "AtomicLoadSub64";
- case ISD::ATOMIC_LOAD_AND_64: return "AtomicLoadAnd64";
- case ISD::ATOMIC_LOAD_OR_64: return "AtomicLoadOr64";
- case ISD::ATOMIC_LOAD_XOR_64: return "AtomicLoadXor64";
- case ISD::ATOMIC_LOAD_NAND_64: return "AtomicLoadNand64";
- case ISD::ATOMIC_LOAD_MIN_64: return "AtomicLoadMin64";
- case ISD::ATOMIC_LOAD_MAX_64: return "AtomicLoadMax64";
- case ISD::ATOMIC_LOAD_UMIN_64: return "AtomicLoadUMin64";
- case ISD::ATOMIC_LOAD_UMAX_64: return "AtomicLoadUMax64";
+ case ISD::ATOMIC_CMP_SWAP: return "AtomicCmpSwap";
+ case ISD::ATOMIC_SWAP: return "AtomicSwap";
+ case ISD::ATOMIC_LOAD_ADD: return "AtomicLoadAdd";
+ case ISD::ATOMIC_LOAD_SUB: return "AtomicLoadSub";
+ case ISD::ATOMIC_LOAD_AND: return "AtomicLoadAnd";
+ case ISD::ATOMIC_LOAD_OR: return "AtomicLoadOr";
+ case ISD::ATOMIC_LOAD_XOR: return "AtomicLoadXor";
+ case ISD::ATOMIC_LOAD_NAND: return "AtomicLoadNand";
+ case ISD::ATOMIC_LOAD_MIN: return "AtomicLoadMin";
+ case ISD::ATOMIC_LOAD_MAX: return "AtomicLoadMax";
+ case ISD::ATOMIC_LOAD_UMIN: return "AtomicLoadUMin";
+ case ISD::ATOMIC_LOAD_UMAX: return "AtomicLoadUMax";
case ISD::PCMARKER: return "PCMarker";
case ISD::READCYCLECOUNTER: return "ReadCycleCounter";
case ISD::SRCVALUE: return "SrcValue";
case ISD::CARRY_FALSE: return "carry_false";
case ISD::ADDC: return "addc";
case ISD::ADDE: return "adde";
+ case ISD::SADDO: return "saddo";
+ case ISD::UADDO: return "uaddo";
+ case ISD::SSUBO: return "ssubo";
+ case ISD::USUBO: return "usubo";
+ case ISD::SMULO: return "smulo";
+ case ISD::UMULO: return "umulo";
case ISD::SUBC: return "subc";
case ISD::SUBE: return "sube";
case ISD::SHL_PARTS: return "shl_parts";
case ISD::FP_TO_SINT: return "fp_to_sint";
case ISD::FP_TO_UINT: return "fp_to_uint";
case ISD::BIT_CONVERT: return "bit_convert";
+
+ case ISD::CONVERT_RNDSAT: {
+ switch (cast<CvtRndSatSDNode>(this)->getCvtCode()) {
+ default: assert(0 && "Unknown cvt code!");
+ case ISD::CVT_FF: return "cvt_ff";
+ case ISD::CVT_FS: return "cvt_fs";
+ case ISD::CVT_FU: return "cvt_fu";
+ case ISD::CVT_SF: return "cvt_sf";
+ case ISD::CVT_UF: return "cvt_uf";
+ case ISD::CVT_SS: return "cvt_ss";
+ case ISD::CVT_SU: return "cvt_su";
+ case ISD::CVT_US: return "cvt_us";
+ case ISD::CVT_UU: return "cvt_uu";
+ }
+ }
// Control flow instructions
case ISD::BR: return "br";
}
} else if (const GlobalAddressSDNode *GADN =
dyn_cast<GlobalAddressSDNode>(this)) {
- int offset = GADN->getOffset();
+ int64_t offset = GADN->getOffset();
OS << '<';
WriteAsOperand(OS, GADN->getGlobal());
OS << '>';