//
//===----------------------------------------------------------------------===//
-#define DEBUG_TYPE "dagcombine"
#include "llvm/CodeGen/SelectionDAG.h"
#include "llvm/ADT/SmallPtrSet.h"
#include "llvm/ADT/Statistic.h"
#include <algorithm>
using namespace llvm;
+#define DEBUG_TYPE "dagcombine"
+
STATISTIC(NodesCombined , "Number of dag nodes combined");
STATISTIC(PreIndexedNodes , "Number of pre-indexed nodes created");
STATISTIC(PostIndexedNodes, "Number of post-indexed nodes created");
bool CombineToPostIndexedLoadStore(SDNode *N);
bool SliceUpLoad(SDNode *N);
+ /// \brief Replace an ISD::EXTRACT_VECTOR_ELT of a load with a narrowed
+ /// load.
+ ///
+ /// \param EVE ISD::EXTRACT_VECTOR_ELT to be replaced.
+ /// \param InVecVT type of the input vector to EVE with bitcasts resolved.
+ /// \param EltNo index of the vector element to load.
+ /// \param OriginalLoad load that EVE came from to be replaced.
+ /// \returns EVE on success SDValue() on failure.
+ SDValue ReplaceExtractVectorEltOfLoadWithNarrowedLoad(
+ SDNode *EVE, EVT InVecVT, SDValue EltNo, LoadSDNode *OriginalLoad);
void ReplaceLoadWithPromotedLoad(SDNode *Load, SDNode *ExtLoad);
SDValue PromoteOperand(SDValue Op, EVT PVT, bool &Replace);
SDValue SExtPromoteOperand(SDValue Op, EVT PVT);
/// isAlias - Return true if there is any possibility that the two addresses
/// overlap.
- bool isAlias(SDValue Ptr1, int64_t Size1, bool IsVolatile1,
- const Value *SrcValue1, int SrcValueOffset1,
- unsigned SrcValueAlign1,
- const MDNode *TBAAInfo1,
- SDValue Ptr2, int64_t Size2, bool IsVolatile2,
- const Value *SrcValue2, int SrcValueOffset2,
- unsigned SrcValueAlign2,
- const MDNode *TBAAInfo2) const;
-
- /// isAlias - Return true if there is any possibility that the two addresses
- /// overlap.
- bool isAlias(LSBaseSDNode *Op0, LSBaseSDNode *Op1);
-
- /// FindAliasInfo - Extracts the relevant alias information from the memory
- /// node. Returns true if the operand was a load.
- bool FindAliasInfo(SDNode *N,
- SDValue &Ptr, int64_t &Size, bool &IsVolatile,
- const Value *&SrcValue, int &SrcValueOffset,
- unsigned &SrcValueAlignment,
- const MDNode *&TBAAInfo) const;
+ bool isAlias(LSBaseSDNode *Op0, LSBaseSDNode *Op1) const;
/// FindBetterChain - Walk up chain skipping non-aliasing memory nodes,
/// looking for a better chain (aliasing node.)
if (ConstantSDNode *CN = dyn_cast<ConstantSDNode>(N))
return CN;
- if (BuildVectorSDNode *BV = dyn_cast<BuildVectorSDNode>(N))
- return BV->getConstantSplatValue();
+ if (BuildVectorSDNode *BV = dyn_cast<BuildVectorSDNode>(N)) {
+ BitVector UndefElements;
+ ConstantSDNode *CN = BV->getConstantSplatNode(&UndefElements);
+
+ // BuildVectors can truncate their operands. Ignore that case here.
+ // FIXME: We blindly ignore splats which include undef which is overly
+ // pessimistic.
+ if (CN && UndefElements.none() &&
+ CN->getValueType(0) == N.getValueType().getScalarType())
+ return CN;
+ }
return nullptr;
}
// Constant operands are canonicalized to RHS.
if (isa<ConstantSDNode>(N0) || !isa<ConstantSDNode>(N1)) {
- SDValue Ops[] = { N1, N0 };
- SDNode *CSENode = DAG.getNodeIfExists(N->getOpcode(), N->getVTList(),
- Ops, 2);
+ SDValue Ops[] = {N1, N0};
+ SDNode *CSENode;
+ if (const BinaryWithFlagsSDNode *BinNode =
+ dyn_cast<BinaryWithFlagsSDNode>(N)) {
+ CSENode = DAG.getNodeIfExists(
+ N->getOpcode(), N->getVTList(), Ops, BinNode->hasNoUnsignedWrap(),
+ BinNode->hasNoSignedWrap(), BinNode->isExact());
+ } else {
+ CSENode = DAG.getNodeIfExists(N->getOpcode(), N->getVTList(), Ops);
+ }
if (CSENode)
return SDValue(CSENode, 0);
}
Result = DAG.getEntryNode();
} else {
// New and improved token factor.
- Result = DAG.getNode(ISD::TokenFactor, SDLoc(N),
- MVT::Other, &Ops[0], Ops.size());
+ Result = DAG.getNode(ISD::TokenFactor, SDLoc(N), MVT::Other, Ops);
}
// Don't add users to work list.
if (VT.isInteger() && !VT.isVector()) {
APInt LHSZero, LHSOne;
APInt RHSZero, RHSOne;
- DAG.ComputeMaskedBits(N0, LHSZero, LHSOne);
+ DAG.computeKnownBits(N0, LHSZero, LHSOne);
if (LHSZero.getBoolValue()) {
- DAG.ComputeMaskedBits(N1, RHSZero, RHSOne);
+ DAG.computeKnownBits(N1, RHSZero, RHSOne);
// If all possibly-set bits on the LHS are clear on the RHS, return an OR.
// If all possibly-set bits on the RHS are clear on the LHS, return an OR.
// fold (addc a, b) -> (or a, b), CARRY_FALSE iff a and b share no bits.
APInt LHSZero, LHSOne;
APInt RHSZero, RHSOne;
- DAG.ComputeMaskedBits(N0, LHSZero, LHSOne);
+ DAG.computeKnownBits(N0, LHSZero, LHSOne);
if (LHSZero.getBoolValue()) {
- DAG.ComputeMaskedBits(N1, RHSZero, RHSOne);
+ DAG.computeKnownBits(N1, RHSZero, RHSOne);
// If all possibly-set bits on the LHS are clear on the RHS, return an OR.
// If all possibly-set bits on the RHS are clear on the LHS, return an OR.
SDValue DAGCombiner::visitSDIV(SDNode *N) {
SDValue N0 = N->getOperand(0);
SDValue N1 = N->getOperand(1);
- ConstantSDNode *N0C = dyn_cast<ConstantSDNode>(N0.getNode());
- ConstantSDNode *N1C = dyn_cast<ConstantSDNode>(N1.getNode());
+ ConstantSDNode *N0C = isConstOrConstSplat(N0);
+ ConstantSDNode *N1C = isConstOrConstSplat(N1);
EVT VT = N->getValueType(0);
// fold vector ops
return DAG.getNode(ISD::UDIV, SDLoc(N), N1.getValueType(),
N0, N1);
}
+
// fold (sdiv X, pow2) -> simple ops after legalize
- if (N1C && !N1C->isNullValue() &&
- (N1C->getAPIntValue().isPowerOf2() ||
- (-N1C->getAPIntValue()).isPowerOf2())) {
+ if (N1C && !N1C->isNullValue() && (N1C->getAPIntValue().isPowerOf2() ||
+ (-N1C->getAPIntValue()).isPowerOf2())) {
// If dividing by powers of two is cheap, then don't perform the following
// fold.
if (TLI.isPow2DivCheap())
unsigned lg2 = N1C->getAPIntValue().countTrailingZeros();
// Splat the sign bit into the register
- SDValue SGN = DAG.getNode(ISD::SRA, SDLoc(N), VT, N0,
- DAG.getConstant(VT.getSizeInBits()-1,
- getShiftAmountTy(N0.getValueType())));
+ SDValue SGN =
+ DAG.getNode(ISD::SRA, SDLoc(N), VT, N0,
+ DAG.getConstant(VT.getScalarSizeInBits() - 1,
+ getShiftAmountTy(N0.getValueType())));
AddToWorkList(SGN.getNode());
// Add (N0 < 0) ? abs2 - 1 : 0;
- SDValue SRL = DAG.getNode(ISD::SRL, SDLoc(N), VT, SGN,
- DAG.getConstant(VT.getSizeInBits() - lg2,
- getShiftAmountTy(SGN.getValueType())));
+ SDValue SRL =
+ DAG.getNode(ISD::SRL, SDLoc(N), VT, SGN,
+ DAG.getConstant(VT.getScalarSizeInBits() - lg2,
+ getShiftAmountTy(SGN.getValueType())));
SDValue ADD = DAG.getNode(ISD::ADD, SDLoc(N), VT, N0, SRL);
AddToWorkList(SRL.getNode());
AddToWorkList(ADD.getNode()); // Divide by pow2
return SRA;
AddToWorkList(SRA.getNode());
- return DAG.getNode(ISD::SUB, SDLoc(N), VT,
- DAG.getConstant(0, VT), SRA);
+ return DAG.getNode(ISD::SUB, SDLoc(N), VT, DAG.getConstant(0, VT), SRA);
}
// if integer divide is expensive and we satisfy the requirements, emit an
// alternate sequence.
- if (N1C && !N1C->isNullValue() && !TLI.isIntDivCheap()) {
+ if (N1C && !TLI.isIntDivCheap()) {
SDValue Op = BuildSDIV(N);
if (Op.getNode()) return Op;
}
SDValue DAGCombiner::visitUDIV(SDNode *N) {
SDValue N0 = N->getOperand(0);
SDValue N1 = N->getOperand(1);
- ConstantSDNode *N0C = dyn_cast<ConstantSDNode>(N0.getNode());
- ConstantSDNode *N1C = dyn_cast<ConstantSDNode>(N1.getNode());
+ ConstantSDNode *N0C = isConstOrConstSplat(N0);
+ ConstantSDNode *N1C = isConstOrConstSplat(N1);
EVT VT = N->getValueType(0);
// fold vector ops
}
}
// fold (udiv x, c) -> alternate
- if (N1C && !N1C->isNullValue() && !TLI.isIntDivCheap()) {
+ if (N1C && !TLI.isIntDivCheap()) {
SDValue Op = BuildUDIV(N);
if (Op.getNode()) return Op;
}
SDValue DAGCombiner::visitSREM(SDNode *N) {
SDValue N0 = N->getOperand(0);
SDValue N1 = N->getOperand(1);
- ConstantSDNode *N0C = dyn_cast<ConstantSDNode>(N0);
- ConstantSDNode *N1C = dyn_cast<ConstantSDNode>(N1);
+ ConstantSDNode *N0C = isConstOrConstSplat(N0);
+ ConstantSDNode *N1C = isConstOrConstSplat(N1);
EVT VT = N->getValueType(0);
// fold (srem c1, c2) -> c1%c2
SDValue DAGCombiner::visitUREM(SDNode *N) {
SDValue N0 = N->getOperand(0);
SDValue N1 = N->getOperand(1);
- ConstantSDNode *N0C = dyn_cast<ConstantSDNode>(N0);
- ConstantSDNode *N1C = dyn_cast<ConstantSDNode>(N1);
+ ConstantSDNode *N0C = isConstOrConstSplat(N0);
+ ConstantSDNode *N1C = isConstOrConstSplat(N1);
EVT VT = N->getValueType(0);
// fold (urem c1, c2) -> c1%c2
(!LegalOperations ||
TLI.isOperationLegalOrCustom(LoOp, N->getValueType(0)))) {
SDValue Res = DAG.getNode(LoOp, SDLoc(N), N->getValueType(0),
- N->op_begin(), N->getNumOperands());
+ ArrayRef<SDUse>(N->op_begin(), N->op_end()));
return CombineTo(N, Res, Res);
}
(!LegalOperations ||
TLI.isOperationLegal(HiOp, N->getValueType(1)))) {
SDValue Res = DAG.getNode(HiOp, SDLoc(N), N->getValueType(1),
- N->op_begin(), N->getNumOperands());
+ ArrayRef<SDUse>(N->op_begin(), N->op_end()));
return CombineTo(N, Res, Res);
}
// If the two computed results can be simplified separately, separate them.
if (LoExists) {
SDValue Lo = DAG.getNode(LoOp, SDLoc(N), N->getValueType(0),
- N->op_begin(), N->getNumOperands());
+ ArrayRef<SDUse>(N->op_begin(), N->op_end()));
AddToWorkList(Lo.getNode());
SDValue LoOpt = combine(Lo.getNode());
if (LoOpt.getNode() && LoOpt.getNode() != Lo.getNode() &&
if (HiExists) {
SDValue Hi = DAG.getNode(HiOp, SDLoc(N), N->getValueType(1),
- N->op_begin(), N->getNumOperands());
+ ArrayRef<SDUse>(N->op_begin(), N->op_end()));
AddToWorkList(Hi.getNode());
SDValue HiOpt = combine(Hi.getNode());
if (HiOpt.getNode() && HiOpt != Hi &&
assert(N0.getOperand(0).getValueType() == N1.getOperand(0).getValueType() &&
"Inputs to shuffles are not the same type");
-
+
// Check that both shuffles use the same mask. The masks are known to be of
// the same length because the result vector type is the same.
// Check also that shuffles have only one use to avoid introducing extra
// Do this only if the resulting shuffle is legal.
if (isa<ShuffleVectorSDNode>(N0) &&
isa<ShuffleVectorSDNode>(N1) &&
+ // Avoid folding a node with illegal type.
+ TLI.isTypeLegal(VT) &&
N0->getOperand(1) == N1->getOperand(1) &&
ISD::isBuildVectorAllZeros(N0.getOperand(1).getNode())) {
bool CanFold = true;
// two ways to fold this node into a shuffle.
SmallVector<int,4> Mask1;
SmallVector<int,4> Mask2;
-
+
for (unsigned i = 0; i != NumElts && CanFold; ++i) {
int M0 = SV0->getMaskElt(i);
int M1 = SV1->getMaskElt(i);
-
+
// Both shuffle indexes are undef. Propagate Undef.
if (M0 < 0 && M1 < 0) {
Mask1.push_back(M0);
CanFold = false;
break;
}
-
+
Mask1.push_back(M0 < (int)NumElts ? M0 : M1 + NumElts);
Mask2.push_back(M1 < (int)NumElts ? M1 : M0 + NumElts);
}
HasPos ? Pos : Neg).getNode();
}
- // fold (or (shl (*ext x), (*ext y)),
- // (srl (*ext x), (*ext (sub 32, y)))) ->
- // (*ext (rotl x, y)) or (*ext (rotr x, (sub 32, y)))
- //
- // fold (or (shl (*ext x), (*ext (sub 32, y))),
- // (srl (*ext x), (*ext y))) ->
- // (*ext (rotr x, y)) or (*ext (rotl x, (sub 32, y)))
- if (Shifted.getOpcode() == ISD::ZERO_EXTEND ||
- Shifted.getOpcode() == ISD::ANY_EXTEND) {
- SDValue InnerShifted = Shifted.getOperand(0);
- EVT InnerVT = InnerShifted.getValueType();
- bool HasPosInner = TLI.isOperationLegalOrCustom(PosOpcode, InnerVT);
- if (HasPosInner || TLI.isOperationLegalOrCustom(NegOpcode, InnerVT)) {
- if (matchRotateSub(InnerPos, InnerNeg, InnerVT.getSizeInBits())) {
- SDValue V = DAG.getNode(HasPosInner ? PosOpcode : NegOpcode, DL,
- InnerVT, InnerShifted, HasPosInner ? Pos : Neg);
- return DAG.getNode(Shifted.getOpcode(), DL, VT, V).getNode();
- }
- }
- }
-
return nullptr;
}
return SDValue();
}
+ if (!TLI.isDesirableToCommuteWithShift(LHS))
+ return SDValue();
+
// Fold the constants, shifting the binop RHS by the shift amount.
SDValue NewRHS = DAG.getNode(N->getOpcode(), SDLoc(LHS->getOperand(1)),
N->getValueType(0),
// If setcc produces all-one true value then:
// (shl (and (setcc) N01CV) N1CV) -> (and (setcc) N01CV<<N1CV)
if (N1CV && N1CV->isConstant()) {
- if (N0.getOpcode() == ISD::AND &&
- TLI.getBooleanContents(true) ==
- TargetLowering::ZeroOrNegativeOneBooleanContent) {
+ if (N0.getOpcode() == ISD::AND) {
SDValue N00 = N0->getOperand(0);
SDValue N01 = N0->getOperand(1);
BuildVectorSDNode *N01CV = dyn_cast<BuildVectorSDNode>(N01);
- if (N01CV && N01CV->isConstant() && N00.getOpcode() == ISD::SETCC) {
+ if (N01CV && N01CV->isConstant() && N00.getOpcode() == ISD::SETCC &&
+ TLI.getBooleanContents(N00.getOperand(0).getValueType()) ==
+ TargetLowering::ZeroOrNegativeOneBooleanContent) {
SDValue C = DAG.FoldConstantArithmetic(ISD::SHL, VT, N01CV, N1CV);
if (C.getNode())
return DAG.getNode(ISD::AND, SDLoc(N), VT, N00, C);
if (N1C && N0.getOpcode() == ISD::CTLZ &&
N1C->getAPIntValue() == Log2_32(OpSizeInBits)) {
APInt KnownZero, KnownOne;
- DAG.ComputeMaskedBits(N0.getOperand(0), KnownZero, KnownOne);
+ DAG.computeKnownBits(N0.getOperand(0), KnownZero, KnownOne);
// If any of the input bits are KnownOne, then the input couldn't be all
// zeros, thus the result of the srl will always be zero.
if (VT == MVT::i1 && N1C && N1C->getAPIntValue() == 1)
return DAG.getNode(ISD::OR, SDLoc(N), VT, N0, N2);
// fold (select C, 0, 1) -> (xor C, 1)
+ // We can't do this reliably if integer based booleans have different contents
+ // to floating point based booleans. This is because we can't tell whether we
+ // have an integer-based boolean or a floating-point-based boolean unless we
+ // can find the SETCC that produced it and inspect its operands. This is
+ // fairly easy if C is the SETCC node, but it can potentially be
+ // undiscoverable (or not reasonably discoverable). For example, it could be
+ // in another basic block or it could require searching a complicated
+ // expression.
if (VT.isInteger() &&
- (VT0 == MVT::i1 ||
- (VT0.isInteger() &&
- TLI.getBooleanContents(false) ==
- TargetLowering::ZeroOrOneBooleanContent)) &&
+ (VT0 == MVT::i1 || (VT0.isInteger() &&
+ TLI.getBooleanContents(false, false) ==
+ TLI.getBooleanContents(false, true) &&
+ TLI.getBooleanContents(false, false) ==
+ TargetLowering::ZeroOrOneBooleanContent)) &&
N1C && N2C && N1C->isNullValue() && N2C->getAPIntValue() == 1) {
SDValue XORNode;
if (VT == VT0)
// fold selects based on a setcc into other things, such as min/max/abs
if (N0.getOpcode() == ISD::SETCC) {
- // FIXME:
- // Check against MVT::Other for SELECT_CC, which is a workaround for targets
- // having to say they don't support SELECT_CC on every type the DAG knows
- // about, since there is no way to mark an opcode illegal at all value types
- if (TLI.isOperationLegalOrCustom(ISD::SELECT_CC, MVT::Other) &&
- TLI.isOperationLegalOrCustom(ISD::SELECT_CC, VT))
+ if ((!LegalOperations &&
+ TLI.isOperationLegalOrCustom(ISD::SELECT_CC, VT)) ||
+ TLI.isOperationLegal(ISD::SELECT_CC, VT))
return DAG.getNode(ISD::SELECT_CC, SDLoc(N), VT,
N0.getOperand(0), N0.getOperand(1),
N1, N2, N0.getOperand(2));
return std::make_pair(Lo, Hi);
}
+// This function assumes all the vselect's arguments are CONCAT_VECTOR
+// nodes and that the condition is a BV of ConstantSDNodes (or undefs).
+static SDValue ConvertSelectToConcatVector(SDNode *N, SelectionDAG &DAG) {
+ SDLoc dl(N);
+ SDValue Cond = N->getOperand(0);
+ SDValue LHS = N->getOperand(1);
+ SDValue RHS = N->getOperand(2);
+ MVT VT = N->getSimpleValueType(0);
+ int NumElems = VT.getVectorNumElements();
+ assert(LHS.getOpcode() == ISD::CONCAT_VECTORS &&
+ RHS.getOpcode() == ISD::CONCAT_VECTORS &&
+ Cond.getOpcode() == ISD::BUILD_VECTOR);
+
+ // We're sure we have an even number of elements due to the
+ // concat_vectors we have as arguments to vselect.
+ // Skip BV elements until we find one that's not an UNDEF
+ // After we find an UNDEF element, keep looping until we get to half the
+ // length of the BV and see if all the non-undef nodes are the same.
+ ConstantSDNode *BottomHalf = nullptr;
+ for (int i = 0; i < NumElems / 2; ++i) {
+ if (Cond->getOperand(i)->getOpcode() == ISD::UNDEF)
+ continue;
+
+ if (BottomHalf == nullptr)
+ BottomHalf = cast<ConstantSDNode>(Cond.getOperand(i));
+ else if (Cond->getOperand(i).getNode() != BottomHalf)
+ return SDValue();
+ }
+
+ // Do the same for the second half of the BuildVector
+ ConstantSDNode *TopHalf = nullptr;
+ for (int i = NumElems / 2; i < NumElems; ++i) {
+ if (Cond->getOperand(i)->getOpcode() == ISD::UNDEF)
+ continue;
+
+ if (TopHalf == nullptr)
+ TopHalf = cast<ConstantSDNode>(Cond.getOperand(i));
+ else if (Cond->getOperand(i).getNode() != TopHalf)
+ return SDValue();
+ }
+
+ assert(TopHalf && BottomHalf &&
+ "One half of the selector was all UNDEFs and the other was all the "
+ "same value. This should have been addressed before this function.");
+ return DAG.getNode(
+ ISD::CONCAT_VECTORS, dl, VT,
+ BottomHalf->isNullValue() ? RHS->getOperand(0) : LHS->getOperand(0),
+ TopHalf->isNullValue() ? RHS->getOperand(1) : LHS->getOperand(1));
+}
+
SDValue DAGCombiner::visitVSELECT(SDNode *N) {
SDValue N0 = N->getOperand(0);
SDValue N1 = N->getOperand(1);
if (ISD::isBuildVectorAllZeros(N0.getNode()))
return N2;
+ // The ConvertSelectToConcatVector function is assuming both the above
+ // checks for (vselect (build_vector all{ones,zeros) ...) have been made
+ // and addressed.
+ if (N1.getOpcode() == ISD::CONCAT_VECTORS &&
+ N2.getOpcode() == ISD::CONCAT_VECTORS &&
+ ISD::isBuildVectorOfConstantSDNodes(N0.getNode())) {
+ SDValue CV = ConvertSelectToConcatVector(N, DAG);
+ if (CV.getNode())
+ return CV;
+ }
+
return SDValue();
}
// tryToFoldExtendOfConstant - Try to fold a sext/zext/aext
// dag node into a ConstantSDNode or a build_vector of constants.
// This function is called by the DAGCombiner when visiting sext/zext/aext
-// dag nodes (see for example method DAGCombiner::visitSIGN_EXTEND).
+// dag nodes (see for example method DAGCombiner::visitSIGN_EXTEND).
// Vector extends are not folded if operations are legal; this is to
// avoid introducing illegal build_vector dag nodes.
static SDNode *tryToFoldExtendOfConstant(SDNode *N, const TargetLowering &TLI,
(!LegalTypes || (!LegalOperations && TLI.isTypeLegal(SVT))) &&
ISD::isBuildVectorOfConstantSDNodes(N0.getNode())))
return nullptr;
-
+
// We can fold this node into a build_vector.
unsigned VTBits = SVT.getSizeInBits();
unsigned EVTBits = N0->getValueType(0).getScalarType().getSizeInBits();
SVT));
}
- return DAG.getNode(ISD::BUILD_VECTOR, DL, VT, &Elts[0], NumElts).getNode();
+ return DAG.getNode(ISD::BUILD_VECTOR, DL, VT, Elts).getNode();
}
// ExtendUsesToFormExtLoad - Trying to extend uses of a load to enable this:
}
Ops.push_back(SetCC->getOperand(2));
- CombineTo(SetCC, DAG.getNode(ISD::SETCC, DL, SetCC->getValueType(0),
- &Ops[0], Ops.size()));
+ CombineTo(SetCC, DAG.getNode(ISD::SETCC, DL, SetCC->getValueType(0), Ops));
}
}
}
if (N0.getOpcode() == ISD::SETCC) {
+ EVT N0VT = N0.getOperand(0).getValueType();
// sext(setcc) -> sext_in_reg(vsetcc) for vectors.
// Only do this before legalize for now.
if (VT.isVector() && !LegalOperations &&
- TLI.getBooleanContents(true) ==
- TargetLowering::ZeroOrNegativeOneBooleanContent) {
- EVT N0VT = N0.getOperand(0).getValueType();
+ TLI.getBooleanContents(N0VT) ==
+ TargetLowering::ZeroOrNegativeOneBooleanContent) {
// On some architectures (such as SSE/NEON/etc) the SETCC result type is
// of the same size as the compared operands. Only optimize sext(setcc())
// if this is the case.
// isTruncateOf - If N is a truncate of some other value, return true, record
// the value being truncated in Op and which of Op's bits are zero in KnownZero.
// This function computes KnownZero to avoid a duplicated call to
-// ComputeMaskedBits in the caller.
+// computeKnownBits in the caller.
static bool isTruncateOf(SelectionDAG &DAG, SDValue N, SDValue &Op,
APInt &KnownZero) {
APInt KnownOne;
if (N->getOpcode() == ISD::TRUNCATE) {
Op = N->getOperand(0);
- DAG.ComputeMaskedBits(Op, KnownZero, KnownOne);
+ DAG.computeKnownBits(Op, KnownZero, KnownOne);
return true;
}
else
return false;
- DAG.ComputeMaskedBits(Op, KnownZero, KnownOne);
+ DAG.computeKnownBits(Op, KnownZero, KnownOne);
if (!(KnownZero | APInt(Op.getValueSizeInBits(), 1)).isAllOnesValue())
return false;
N0.getOperand(1),
cast<CondCodeSDNode>(N0.getOperand(2))->get()),
DAG.getNode(ISD::BUILD_VECTOR, SDLoc(N), VT,
- &OneOps[0], OneOps.size()));
+ OneOps));
// If the desired elements are smaller or larger than the source
// elements we can use a matching integer vector type and then
cast<CondCodeSDNode>(N0.getOperand(2))->get());
return DAG.getNode(ISD::AND, SDLoc(N), VT,
DAG.getSExtOrTrunc(VsetCC, SDLoc(N), VT),
- DAG.getNode(ISD::BUILD_VECTOR, SDLoc(N), VT,
- &OneOps[0], OneOps.size()));
+ DAG.getNode(ISD::BUILD_VECTOR, SDLoc(N), VT, OneOps));
}
// zext(setcc x,y,cc) -> select_cc x, y, 1, 0, cc
// scalars.
if (ISD::isNON_EXTLoad(N0.getNode()) && !VT.isVector() &&
ISD::isUNINDEXEDLoad(N0.getNode()) &&
- ((!LegalOperations && !cast<LoadSDNode>(N0)->isVolatile()) ||
- TLI.isLoadExtLegal(ISD::EXTLOAD, N0.getValueType()))) {
+ TLI.isLoadExtLegal(ISD::EXTLOAD, N0.getValueType())) {
bool DoXform = true;
SmallVector<SDNode*, 4> SetCCs;
if (!N0.hasOneUse())
}
if (N0.getOpcode() == ISD::SETCC) {
- // aext(setcc) -> sext_in_reg(vsetcc) for vectors.
+ // For vectors:
+ // aext(setcc) -> vsetcc
+ // aext(setcc) -> truncate(vsetcc)
+ // aext(setcc) -> aext(vsetcc)
// Only do this before legalize for now.
if (VT.isVector() && !LegalOperations) {
EVT N0VT = N0.getOperand(0).getValueType();
cast<CondCodeSDNode>(N0.getOperand(2))->get());
// If the desired elements are smaller or larger than the source
// elements we can use a matching integer vector type and then
- // truncate/sign extend
+ // truncate/any extend
else {
- EVT MatchingElementType =
- EVT::getIntegerVT(*DAG.getContext(),
- N0VT.getScalarType().getSizeInBits());
- EVT MatchingVectorType =
- EVT::getVectorVT(*DAG.getContext(), MatchingElementType,
- N0VT.getVectorNumElements());
+ EVT MatchingVectorType = N0VT.changeVectorElementTypeToInteger();
SDValue VsetCC =
DAG.getSetCC(SDLoc(N), MatchingVectorType, N0.getOperand(0),
N0.getOperand(1),
cast<CondCodeSDNode>(N0.getOperand(2))->get());
- return DAG.getSExtOrTrunc(VsetCC, SDLoc(N), VT);
+ return DAG.getAnyExtOrTrunc(VsetCC, SDLoc(N), VT);
}
}
Op.getValueType()));
}
- return DAG.getNode(ISD::BUILD_VECTOR, SDLoc(N), VT, &Elts[0], NumElts);
+ return DAG.getNode(ISD::BUILD_VECTOR, SDLoc(N), VT, Elts);
}
return SDValue();
}
}
+ // trunc (select c, a, b) -> select c, (trunc a), (trunc b)
+ if (N0.getOpcode() == ISD::SELECT) {
+ EVT SrcVT = N0.getValueType();
+ if ((!LegalOperations || TLI.isOperationLegal(ISD::SELECT, SrcVT)) &&
+ TLI.isTruncateFree(SrcVT, VT)) {
+ SDLoc SL(N0);
+ SDValue Cond = N0.getOperand(0);
+ SDValue TruncOp0 = DAG.getNode(ISD::TRUNCATE, SL, VT, N0.getOperand(1));
+ SDValue TruncOp1 = DAG.getNode(ISD::TRUNCATE, SL, VT, N0.getOperand(2));
+ return DAG.getNode(ISD::SELECT, SDLoc(N), VT, Cond, TruncOp0, TruncOp1);
+ }
+ }
+
// Fold a series of buildvector, bitcast, and truncate if possible.
// For example fold
// (2xi32 trunc (bitcast ((4xi32)buildvector x, x, y, y) 2xi64)) to
for (unsigned i = 0, e = BuildVecNumElts; i != e; i += TruncEltOffset)
Opnds.push_back(BuildVect.getOperand(i));
- return DAG.getNode(ISD::BUILD_VECTOR, SDLoc(N), VT, &Opnds[0],
- Opnds.size());
+ return DAG.getNode(ISD::BUILD_VECTOR, SDLoc(N), VT, Opnds);
}
}
AddToWorkList(NV.getNode());
Opnds.push_back(NV);
}
- return DAG.getNode(ISD::CONCAT_VECTORS, SDLoc(N), VT,
- &Opnds[0], Opnds.size());
+ return DAG.getNode(ISD::CONCAT_VECTORS, SDLoc(N), VT, Opnds);
}
}
if (ISD::isNormalLoad(N0.getNode()) && N0.hasOneUse() &&
// Do not change the width of a volatile load.
!cast<LoadSDNode>(N0)->isVolatile() &&
+ // Do not remove the cast if the types differ in endian layout.
+ TLI.hasBigEndianPartOrdering(N0.getValueType()) ==
+ TLI.hasBigEndianPartOrdering(VT) &&
(!LegalOperations || TLI.isOperationLegal(ISD::LOAD, VT)) &&
TLI.isLoadBitCastBeneficial(N0.getValueType(), VT)) {
LoadSDNode *LN0 = cast<LoadSDNode>(N0);
DstEltVT, Op));
AddToWorkList(Ops.back().getNode());
}
- return DAG.getNode(ISD::BUILD_VECTOR, SDLoc(BV), VT,
- &Ops[0], Ops.size());
+ return DAG.getNode(ISD::BUILD_VECTOR, SDLoc(BV), VT, Ops);
}
// Otherwise, we're growing or shrinking the elements. To avoid having to
}
EVT VT = EVT::getVectorVT(*DAG.getContext(), DstEltVT, Ops.size());
- return DAG.getNode(ISD::BUILD_VECTOR, SDLoc(BV), VT,
- &Ops[0], Ops.size());
+ return DAG.getNode(ISD::BUILD_VECTOR, SDLoc(BV), VT, Ops);
}
// Finally, this must be the case where we are shrinking elements: each input
std::reverse(Ops.end()-NumOutputsPerInput, Ops.end());
}
- return DAG.getNode(ISD::BUILD_VECTOR, SDLoc(BV), VT,
- &Ops[0], Ops.size());
+ return DAG.getNode(ISD::BUILD_VECTOR, SDLoc(BV), VT, Ops);
}
SDValue DAGCombiner::visitFADD(SDNode *N) {
}
// The next optimizations are desirable only if SELECT_CC can be lowered.
- // Check against MVT::Other for SELECT_CC, which is a workaround for targets
- // having to say they don't support SELECT_CC on every type the DAG knows
- // about, since there is no way to mark an opcode illegal at all value types
- // (See also visitSELECT)
- if (TLI.isOperationLegalOrCustom(ISD::SELECT_CC, MVT::Other)) {
+ if (TLI.isOperationLegalOrCustom(ISD::SELECT_CC, VT) || !LegalOperations) {
// fold (sint_to_fp (setcc x, y, cc)) -> (select_cc x, y, -1.0, 0.0,, cc)
if (N0.getOpcode() == ISD::SETCC && N0.getValueType() == MVT::i1 &&
!VT.isVector() &&
{ N0.getOperand(0), N0.getOperand(1),
DAG.getConstantFP(-1.0, VT) , DAG.getConstantFP(0.0, VT),
N0.getOperand(2) };
- return DAG.getNode(ISD::SELECT_CC, SDLoc(N), VT, Ops, 5);
+ return DAG.getNode(ISD::SELECT_CC, SDLoc(N), VT, Ops);
}
// fold (sint_to_fp (zext (setcc x, y, cc))) ->
{ N0.getOperand(0).getOperand(0), N0.getOperand(0).getOperand(1),
DAG.getConstantFP(1.0, VT) , DAG.getConstantFP(0.0, VT),
N0.getOperand(0).getOperand(2) };
- return DAG.getNode(ISD::SELECT_CC, SDLoc(N), VT, Ops, 5);
+ return DAG.getNode(ISD::SELECT_CC, SDLoc(N), VT, Ops);
}
}
}
// The next optimizations are desirable only if SELECT_CC can be lowered.
- // Check against MVT::Other for SELECT_CC, which is a workaround for targets
- // having to say they don't support SELECT_CC on every type the DAG knows
- // about, since there is no way to mark an opcode illegal at all value types
- // (See also visitSELECT)
- if (TLI.isOperationLegalOrCustom(ISD::SELECT_CC, MVT::Other)) {
+ if (TLI.isOperationLegalOrCustom(ISD::SELECT_CC, VT) || !LegalOperations) {
// fold (uint_to_fp (setcc x, y, cc)) -> (select_cc x, y, -1.0, 0.0,, cc)
if (N0.getOpcode() == ISD::SETCC && !VT.isVector() &&
{ N0.getOperand(0), N0.getOperand(1),
DAG.getConstantFP(1.0, VT), DAG.getConstantFP(0.0, VT),
N0.getOperand(2) };
- return DAG.getNode(ISD::SELECT_CC, SDLoc(N), VT, Ops, 5);
+ return DAG.getNode(ISD::SELECT_CC, SDLoc(N), VT, Ops);
}
}
// fold (fpext (load x)) -> (fpext (fptrunc (extload x)))
if (ISD::isNormalLoad(N0.getNode()) && N0.hasOneUse() &&
- ((!LegalOperations && !cast<LoadSDNode>(N0)->isVolatile()) ||
- TLI.isLoadExtLegal(ISD::EXTLOAD, N0.getValueType()))) {
+ TLI.isLoadExtLegal(ISD::EXTLOAD, N0.getValueType())) {
LoadSDNode *LN0 = cast<LoadSDNode>(N0);
SDValue ExtLoad = DAG.getExtLoad(ISD::EXTLOAD, SDLoc(N), VT,
LN0->getChain(),
// (fneg (fmul c, x)) -> (fmul -c, x)
if (N0.getOpcode() == ISD::FMUL) {
ConstantFPSDNode *CFP1 = dyn_cast<ConstantFPSDNode>(N0.getOperand(1));
- if (CFP1)
- return DAG.getNode(ISD::FMUL, SDLoc(N), VT,
- N0.getOperand(0),
- DAG.getNode(ISD::FNEG, SDLoc(N), VT,
- N0.getOperand(1)));
+ if (CFP1) {
+ APFloat CVal = CFP1->getValueAPF();
+ CVal.changeSign();
+ if (Level >= AfterLegalizeDAG &&
+ (TLI.isFPImmLegal(CVal, N->getValueType(0)) ||
+ TLI.isOperationLegal(ISD::ConstantFP, N->getValueType(0))))
+ return DAG.getNode(
+ ISD::FMUL, SDLoc(N), VT, N0.getOperand(0),
+ DAG.getNode(ISD::FNEG, SDLoc(N), VT, N0.getOperand(1)));
+ }
}
return SDValue();
}
SDValue Chain = DAG.getNode(ISD::TokenFactor, SDLoc(LD), MVT::Other,
- &ArgChains[0], ArgChains.size());
+ ArgChains);
DAG.ReplaceAllUsesOfValueWith(SDValue(N, 1), Chain);
return true;
}
return SDValue();
unsigned Elt = cast<ConstantSDNode>(EltNo)->getZExtValue();
+ // Canonicalize insert_vector_elt dag nodes.
+ // Example:
+ // (insert_vector_elt (insert_vector_elt A, Idx0), Idx1)
+ // -> (insert_vector_elt (insert_vector_elt A, Idx1), Idx0)
+ //
+ // Do this only if the child insert_vector node has one use; also
+ // do this only if indices are both constants and Idx1 < Idx0.
+ if (InVec.getOpcode() == ISD::INSERT_VECTOR_ELT && InVec.hasOneUse()
+ && isa<ConstantSDNode>(InVec.getOperand(2))) {
+ unsigned OtherElt =
+ cast<ConstantSDNode>(InVec.getOperand(2))->getZExtValue();
+ if (Elt < OtherElt) {
+ // Swap nodes.
+ SDValue NewOp = DAG.getNode(ISD::INSERT_VECTOR_ELT, SDLoc(N), VT,
+ InVec.getOperand(0), InVal, EltNo);
+ AddToWorkList(NewOp.getNode());
+ return DAG.getNode(ISD::INSERT_VECTOR_ELT, SDLoc(InVec.getNode()),
+ VT, NewOp, InVec.getOperand(1), InVec.getOperand(2));
+ }
+ }
+
// Check that the operand is a BUILD_VECTOR (or UNDEF, which can essentially
// be converted to a BUILD_VECTOR). Fill in the Ops vector with the
// vector elements.
}
// Return the new vector
- return DAG.getNode(ISD::BUILD_VECTOR, dl,
- VT, &Ops[0], Ops.size());
+ return DAG.getNode(ISD::BUILD_VECTOR, dl, VT, Ops);
+}
+
+SDValue DAGCombiner::ReplaceExtractVectorEltOfLoadWithNarrowedLoad(
+ SDNode *EVE, EVT InVecVT, SDValue EltNo, LoadSDNode *OriginalLoad) {
+ EVT ResultVT = EVE->getValueType(0);
+ EVT VecEltVT = InVecVT.getVectorElementType();
+ unsigned Align = OriginalLoad->getAlignment();
+ unsigned NewAlign = TLI.getDataLayout()->getABITypeAlignment(
+ VecEltVT.getTypeForEVT(*DAG.getContext()));
+
+ if (NewAlign > Align || !TLI.isOperationLegalOrCustom(ISD::LOAD, VecEltVT))
+ return SDValue();
+
+ Align = NewAlign;
+
+ SDValue NewPtr = OriginalLoad->getBasePtr();
+ SDValue Offset;
+ EVT PtrType = NewPtr.getValueType();
+ MachinePointerInfo MPI;
+ if (auto *ConstEltNo = dyn_cast<ConstantSDNode>(EltNo)) {
+ int Elt = ConstEltNo->getZExtValue();
+ unsigned PtrOff = VecEltVT.getSizeInBits() * Elt / 8;
+ if (TLI.isBigEndian())
+ PtrOff = InVecVT.getSizeInBits() / 8 - PtrOff;
+ Offset = DAG.getConstant(PtrOff, PtrType);
+ MPI = OriginalLoad->getPointerInfo().getWithOffset(PtrOff);
+ } else {
+ Offset = DAG.getNode(
+ ISD::MUL, SDLoc(EVE), EltNo.getValueType(), EltNo,
+ DAG.getConstant(VecEltVT.getStoreSize(), EltNo.getValueType()));
+ if (TLI.isBigEndian())
+ Offset = DAG.getNode(
+ ISD::SUB, SDLoc(EVE), EltNo.getValueType(),
+ DAG.getConstant(InVecVT.getStoreSize(), EltNo.getValueType()), Offset);
+ MPI = OriginalLoad->getPointerInfo();
+ }
+ NewPtr = DAG.getNode(ISD::ADD, SDLoc(EVE), PtrType, NewPtr, Offset);
+
+ // The replacement we need to do here is a little tricky: we need to
+ // replace an extractelement of a load with a load.
+ // Use ReplaceAllUsesOfValuesWith to do the replacement.
+ // Note that this replacement assumes that the extractvalue is the only
+ // use of the load; that's okay because we don't want to perform this
+ // transformation in other cases anyway.
+ SDValue Load;
+ SDValue Chain;
+ if (ResultVT.bitsGT(VecEltVT)) {
+ // If the result type of vextract is wider than the load, then issue an
+ // extending load instead.
+ ISD::LoadExtType ExtType = TLI.isLoadExtLegal(ISD::ZEXTLOAD, VecEltVT)
+ ? ISD::ZEXTLOAD
+ : ISD::EXTLOAD;
+ Load = DAG.getExtLoad(ExtType, SDLoc(EVE), ResultVT, OriginalLoad->getChain(),
+ NewPtr, MPI, VecEltVT, OriginalLoad->isVolatile(),
+ OriginalLoad->isNonTemporal(), Align,
+ OriginalLoad->getTBAAInfo());
+ Chain = Load.getValue(1);
+ } else {
+ Load = DAG.getLoad(
+ VecEltVT, SDLoc(EVE), OriginalLoad->getChain(), NewPtr, MPI,
+ OriginalLoad->isVolatile(), OriginalLoad->isNonTemporal(),
+ OriginalLoad->isInvariant(), Align, OriginalLoad->getTBAAInfo());
+ Chain = Load.getValue(1);
+ if (ResultVT.bitsLT(VecEltVT))
+ Load = DAG.getNode(ISD::TRUNCATE, SDLoc(EVE), ResultVT, Load);
+ else
+ Load = DAG.getNode(ISD::BITCAST, SDLoc(EVE), ResultVT, Load);
+ }
+ WorkListRemover DeadNodes(*this);
+ SDValue From[] = { SDValue(EVE, 0), SDValue(OriginalLoad, 1) };
+ SDValue To[] = { Load, Chain };
+ DAG.ReplaceAllUsesOfValuesWith(From, To, 2);
+ // Since we're explicitly calling ReplaceAllUses, add the new node to the
+ // worklist explicitly as well.
+ AddToWorkList(Load.getNode());
+ AddUsersToWorkList(Load.getNode()); // Add users too
+ // Make sure to revisit this node to clean it up; it will usually be dead.
+ AddToWorkList(EVE);
+ ++OpsNarrowed;
+ return SDValue(EVE, 0);
}
SDValue DAGCombiner::visitEXTRACT_VECTOR_ELT(SDNode *N) {
}
}
+ bool BCNumEltsChanged = false;
+ EVT ExtVT = VT.getVectorElementType();
+ EVT LVT = ExtVT;
+
+ // If the result of load has to be truncated, then it's not necessarily
+ // profitable.
+ if (NVT.bitsLT(LVT) && !TLI.isTruncateFree(LVT, NVT))
+ return SDValue();
+
+ if (InVec.getOpcode() == ISD::BITCAST) {
+ // Don't duplicate a load with other uses.
+ if (!InVec.hasOneUse())
+ return SDValue();
+
+ EVT BCVT = InVec.getOperand(0).getValueType();
+ if (!BCVT.isVector() || ExtVT.bitsGT(BCVT.getVectorElementType()))
+ return SDValue();
+ if (VT.getVectorNumElements() != BCVT.getVectorNumElements())
+ BCNumEltsChanged = true;
+ InVec = InVec.getOperand(0);
+ ExtVT = BCVT.getVectorElementType();
+ }
+
+ // (vextract (vN[if]M load $addr), i) -> ([if]M load $addr + i * size)
+ if (!LegalOperations && !ConstEltNo && InVec.hasOneUse() &&
+ ISD::isNormalLoad(InVec.getNode())) {
+ SDValue Index = N->getOperand(1);
+ if (LoadSDNode *OrigLoad = dyn_cast<LoadSDNode>(InVec))
+ return ReplaceExtractVectorEltOfLoadWithNarrowedLoad(N, VT, Index,
+ OrigLoad);
+ }
+
// Perform only after legalization to ensure build_vector / vector_shuffle
// optimizations have already been done.
if (!LegalOperations) return SDValue();
if (ConstEltNo) {
int Elt = cast<ConstantSDNode>(EltNo)->getZExtValue();
- bool NewLoad = false;
- bool BCNumEltsChanged = false;
- EVT ExtVT = VT.getVectorElementType();
- EVT LVT = ExtVT;
-
- // If the result of load has to be truncated, then it's not necessarily
- // profitable.
- if (NVT.bitsLT(LVT) && !TLI.isTruncateFree(LVT, NVT))
- return SDValue();
-
- if (InVec.getOpcode() == ISD::BITCAST) {
- // Don't duplicate a load with other uses.
- if (!InVec.hasOneUse())
- return SDValue();
-
- EVT BCVT = InVec.getOperand(0).getValueType();
- if (!BCVT.isVector() || ExtVT.bitsGT(BCVT.getVectorElementType()))
- return SDValue();
- if (VT.getVectorNumElements() != BCVT.getVectorNumElements())
- BCNumEltsChanged = true;
- InVec = InVec.getOperand(0);
- ExtVT = BCVT.getVectorElementType();
- NewLoad = true;
- }
LoadSDNode *LN0 = nullptr;
const ShuffleVectorSDNode *SVN = nullptr;
if (ISD::isNormalLoad(InVec.getNode())) {
LN0 = cast<LoadSDNode>(InVec);
Elt = (Idx < (int)NumElems) ? Idx : Idx - (int)NumElems;
+ EltNo = DAG.getConstant(Elt, EltNo.getValueType());
}
}
if (Elt == -1)
return DAG.getUNDEF(LVT);
- unsigned Align = LN0->getAlignment();
- if (NewLoad) {
- // Check the resultant load doesn't need a higher alignment than the
- // original load.
- unsigned NewAlign =
- TLI.getDataLayout()
- ->getABITypeAlignment(LVT.getTypeForEVT(*DAG.getContext()));
-
- if (NewAlign > Align || !TLI.isOperationLegalOrCustom(ISD::LOAD, LVT))
- return SDValue();
-
- Align = NewAlign;
- }
-
- SDValue NewPtr = LN0->getBasePtr();
- unsigned PtrOff = 0;
-
- if (Elt) {
- PtrOff = LVT.getSizeInBits() * Elt / 8;
- EVT PtrType = NewPtr.getValueType();
- if (TLI.isBigEndian())
- PtrOff = VT.getSizeInBits() / 8 - PtrOff;
- NewPtr = DAG.getNode(ISD::ADD, SDLoc(N), PtrType, NewPtr,
- DAG.getConstant(PtrOff, PtrType));
- }
-
- // The replacement we need to do here is a little tricky: we need to
- // replace an extractelement of a load with a load.
- // Use ReplaceAllUsesOfValuesWith to do the replacement.
- // Note that this replacement assumes that the extractvalue is the only
- // use of the load; that's okay because we don't want to perform this
- // transformation in other cases anyway.
- SDValue Load;
- SDValue Chain;
- if (NVT.bitsGT(LVT)) {
- // If the result type of vextract is wider than the load, then issue an
- // extending load instead.
- ISD::LoadExtType ExtType = TLI.isLoadExtLegal(ISD::ZEXTLOAD, LVT)
- ? ISD::ZEXTLOAD : ISD::EXTLOAD;
- Load = DAG.getExtLoad(ExtType, SDLoc(N), NVT, LN0->getChain(),
- NewPtr, LN0->getPointerInfo().getWithOffset(PtrOff),
- LVT, LN0->isVolatile(), LN0->isNonTemporal(),
- Align, LN0->getTBAAInfo());
- Chain = Load.getValue(1);
- } else {
- Load = DAG.getLoad(LVT, SDLoc(N), LN0->getChain(), NewPtr,
- LN0->getPointerInfo().getWithOffset(PtrOff),
- LN0->isVolatile(), LN0->isNonTemporal(),
- LN0->isInvariant(), Align, LN0->getTBAAInfo());
- Chain = Load.getValue(1);
- if (NVT.bitsLT(LVT))
- Load = DAG.getNode(ISD::TRUNCATE, SDLoc(N), NVT, Load);
- else
- Load = DAG.getNode(ISD::BITCAST, SDLoc(N), NVT, Load);
- }
- WorkListRemover DeadNodes(*this);
- SDValue From[] = { SDValue(N, 0), SDValue(LN0,1) };
- SDValue To[] = { Load, Chain };
- DAG.ReplaceAllUsesOfValuesWith(From, To, 2);
- // Since we're explcitly calling ReplaceAllUses, add the new node to the
- // worklist explicitly as well.
- AddToWorkList(Load.getNode());
- AddUsersToWorkList(Load.getNode()); // Add users too
- // Make sure to revisit this node to clean it up; it will usually be dead.
- AddToWorkList(N);
- return SDValue(N, 0);
+ return ReplaceExtractVectorEltOfLoadWithNarrowedLoad(N, VT, EltNo, LN0);
}
return SDValue();
if (!isTypeLegal(VecVT)) return SDValue();
// Make the new BUILD_VECTOR.
- SDValue BV = DAG.getNode(ISD::BUILD_VECTOR, dl, VecVT, &Ops[0], Ops.size());
+ SDValue BV = DAG.getNode(ISD::BUILD_VECTOR, dl, VecVT, Ops);
// The new BUILD_VECTOR node has the potential to be further optimized.
AddToWorkList(BV.getNode());
else
Opnds.push_back(In.getOperand(0));
}
- SDValue BV = DAG.getNode(ISD::BUILD_VECTOR, dl, NVT,
- &Opnds[0], Opnds.size());
+ SDValue BV = DAG.getNode(ISD::BUILD_VECTOR, dl, NVT, Opnds);
AddToWorkList(BV.getNode());
return DAG.getNode(Opcode, dl, VT, BV);
}
}
- // If everything is good, we can make a shuffle operation.
+ // If everything is good, we can make a shuffle operation.
if (VecIn1.getNode()) {
SmallVector<int, 8> Mask;
for (unsigned i = 0; i != NumInScalars; ++i) {
SmallVector<SDValue, 8> Opnds;
unsigned BuildVecNumElts = N0.getNumOperands();
- for (unsigned i = 0; i != BuildVecNumElts; ++i)
- Opnds.push_back(N0.getOperand(i));
- for (unsigned i = 0; i != BuildVecNumElts; ++i)
- Opnds.push_back(N1.getOperand(i));
+ EVT SclTy0 = N0.getOperand(0)->getValueType(0);
+ EVT SclTy1 = N1.getOperand(0)->getValueType(0);
+ if (SclTy0.isFloatingPoint()) {
+ for (unsigned i = 0; i != BuildVecNumElts; ++i)
+ Opnds.push_back(N0.getOperand(i));
+ for (unsigned i = 0; i != BuildVecNumElts; ++i)
+ Opnds.push_back(N1.getOperand(i));
+ } else {
+ // If BUILD_VECTOR are from built from integer, they may have different
+ // operand types. Get the smaller type and truncate all operands to it.
+ EVT MinTy = SclTy0.bitsLE(SclTy1) ? SclTy0 : SclTy1;
+ for (unsigned i = 0; i != BuildVecNumElts; ++i)
+ Opnds.push_back(DAG.getNode(ISD::TRUNCATE, SDLoc(N), MinTy,
+ N0.getOperand(i)));
+ for (unsigned i = 0; i != BuildVecNumElts; ++i)
+ Opnds.push_back(DAG.getNode(ISD::TRUNCATE, SDLoc(N), MinTy,
+ N1.getOperand(i)));
+ }
- return DAG.getNode(ISD::BUILD_VECTOR, SDLoc(N), VT, &Opnds[0],
- Opnds.size());
+ return DAG.getNode(ISD::BUILD_VECTOR, SDLoc(N), VT, Opnds);
}
// Type legalization of vectors and DAG canonicalization of SHUFFLE_VECTOR
}
}
- return DAG.getNode(ISD::CONCAT_VECTORS, SDLoc(N), VT, Ops.data(),
- Ops.size());
+ return DAG.getNode(ISD::CONCAT_VECTORS, SDLoc(N), VT, Ops);
}
SDValue DAGCombiner::visitVECTOR_SHUFFLE(SDNode *N) {
}
// If this shuffle node is simply a swizzle of another shuffle node,
- // and it reverses the swizzle of the previous shuffle then we can
- // optimize shuffle(shuffle(x, undef), undef) -> x.
+ // then try to simplify it.
if (N0.getOpcode() == ISD::VECTOR_SHUFFLE && Level < AfterLegalizeDAG &&
N1.getOpcode() == ISD::UNDEF) {
ShuffleVectorSDNode *OtherSV = cast<ShuffleVectorSDNode>(N0);
- // Shuffle nodes can only reverse shuffles with a single non-undef value.
- if (N0.getOperand(1).getOpcode() != ISD::UNDEF)
- return SDValue();
-
// The incoming shuffle must be of the same type as the result of the
// current shuffle.
assert(OtherSV->getOperand(0).getValueType() == VT &&
"Shuffle types don't match");
+ SmallVector<int, 4> Mask;
+ // Compute the combined shuffle mask.
for (unsigned i = 0; i != NumElts; ++i) {
int Idx = SVN->getMaskElt(i);
assert(Idx < (int)NumElts && "Index references undef operand");
// shuffle. Adopt the incoming index.
if (Idx >= 0)
Idx = OtherSV->getMaskElt(Idx);
+ Mask.push_back(Idx);
+ }
+
+ bool CommuteOperands = false;
+ if (N0.getOperand(1).getOpcode() != ISD::UNDEF) {
+ // To be valid, the combine shuffle mask should only reference elements
+ // from one of the two vectors in input to the inner shufflevector.
+ bool IsValidMask = true;
+ for (unsigned i = 0; i != NumElts && IsValidMask; ++i)
+ // See if the combined mask only reference undefs or elements coming
+ // from the first shufflevector operand.
+ IsValidMask = Mask[i] < 0 || (unsigned)Mask[i] < NumElts;
+
+ if (!IsValidMask) {
+ IsValidMask = true;
+ for (unsigned i = 0; i != NumElts && IsValidMask; ++i)
+ // Check that all the elements come from the second shuffle operand.
+ IsValidMask = Mask[i] < 0 || (unsigned)Mask[i] >= NumElts;
+ CommuteOperands = IsValidMask;
+ }
- // The combined shuffle must map each index to itself.
- if (Idx >= 0 && (unsigned)Idx != i)
+ // Early exit if the combined shuffle mask is not valid.
+ if (!IsValidMask)
return SDValue();
}
- return OtherSV->getOperand(0);
+ // See if this pair of shuffles can be safely folded according to either
+ // of the following rules:
+ // shuffle(shuffle(x, y), undef) -> x
+ // shuffle(shuffle(x, undef), undef) -> x
+ // shuffle(shuffle(x, y), undef) -> y
+ bool IsIdentityMask = true;
+ unsigned BaseMaskIndex = CommuteOperands ? NumElts : 0;
+ for (unsigned i = 0; i != NumElts && IsIdentityMask; ++i) {
+ // Skip Undefs.
+ if (Mask[i] < 0)
+ continue;
+
+ // The combined shuffle must map each index to itself.
+ IsIdentityMask = (unsigned)Mask[i] == i + BaseMaskIndex;
+ }
+
+ if (IsIdentityMask) {
+ if (CommuteOperands)
+ // optimize shuffle(shuffle(x, y), undef) -> y.
+ return OtherSV->getOperand(1);
+
+ // optimize shuffle(shuffle(x, undef), undef) -> x
+ // optimize shuffle(shuffle(x, y), undef) -> x
+ return OtherSV->getOperand(0);
+ }
+
+ // It may still be beneficial to combine the two shuffles if the
+ // resulting shuffle is legal.
+ if (TLI.isTypeLegal(VT) && TLI.isShuffleMaskLegal(Mask, VT)) {
+ if (!CommuteOperands)
+ // shuffle(shuffle(x, undef, M1), undef, M2) -> shuffle(x, undef, M3).
+ // shuffle(shuffle(x, y, M1), undef, M2) -> shuffle(x, undef, M3)
+ return DAG.getVectorShuffle(VT, SDLoc(N), N0->getOperand(0), N1,
+ &Mask[0]);
+
+ // shuffle(shuffle(x, y, M1), undef, M2) -> shuffle(undef, y, M3)
+ return DAG.getVectorShuffle(VT, SDLoc(N), N1, N0->getOperand(1),
+ &Mask[0]);
+ }
+ }
+
+ // Try to fold according to rules:
+ // shuffle(shuffle(A, B, M0), B, M1) -> shuffle(A, B, M2)
+ // shuffle(shuffle(A, B, M0), A, M1) -> shuffle(A, B, M2)
+ // shuffle(shuffle(A, Undef, M0), B, M1) -> shuffle(A, B, M2)
+ // shuffle(shuffle(A, Undef, M0), A, M1) -> shuffle(A, Undef, M2)
+ // Don't try to fold shuffles with illegal type.
+ if (N0.getOpcode() == ISD::VECTOR_SHUFFLE && Level < AfterLegalizeDAG &&
+ N1.getOpcode() != ISD::UNDEF && TLI.isTypeLegal(VT)) {
+ ShuffleVectorSDNode *OtherSV = cast<ShuffleVectorSDNode>(N0);
+
+ // The incoming shuffle must be of the same type as the result of the
+ // current shuffle.
+ assert(OtherSV->getOperand(0).getValueType() == VT &&
+ "Shuffle types don't match");
+
+ SDValue SV0 = OtherSV->getOperand(0);
+ SDValue SV1 = OtherSV->getOperand(1);
+ bool HasSameOp0 = N1 == SV0;
+ bool IsSV1Undef = SV1.getOpcode() == ISD::UNDEF;
+ if (!HasSameOp0 && !IsSV1Undef && N1 != SV1)
+ // Early exit.
+ return SDValue();
+
+ SmallVector<int, 4> Mask;
+ // Compute the combined shuffle mask for a shuffle with SV0 as the first
+ // operand, and SV1 as the second operand.
+ for (unsigned i = 0; i != NumElts; ++i) {
+ int Idx = SVN->getMaskElt(i);
+ if (Idx < 0) {
+ // Propagate Undef.
+ Mask.push_back(Idx);
+ continue;
+ }
+
+ if (Idx < (int)NumElts) {
+ Idx = OtherSV->getMaskElt(Idx);
+ if (IsSV1Undef && Idx >= (int) NumElts)
+ Idx = -1; // Propagate Undef.
+ } else
+ Idx = HasSameOp0 ? Idx - NumElts : Idx;
+
+ Mask.push_back(Idx);
+ }
+
+ // Avoid introducing shuffles with illegal mask.
+ if (TLI.isShuffleMaskLegal(Mask, VT)) {
+ if (IsSV1Undef)
+ // shuffle(shuffle(A, Undef, M0), B, M1) -> shuffle(A, B, M2)
+ // shuffle(shuffle(A, Undef, M0), A, M1) -> shuffle(A, Undef, M2)
+ return DAG.getVectorShuffle(VT, SDLoc(N), SV0, N1, &Mask[0]);
+ return DAG.getVectorShuffle(VT, SDLoc(N), SV0, SV1, &Mask[0]);
+ }
}
return SDValue();
EVT EltVT = RVT.getVectorElementType();
SmallVector<SDValue,8> ZeroOps(RVT.getVectorNumElements(),
DAG.getConstant(0, EltVT));
- SDValue Zero = DAG.getNode(ISD::BUILD_VECTOR, SDLoc(N),
- RVT, &ZeroOps[0], ZeroOps.size());
+ SDValue Zero = DAG.getNode(ISD::BUILD_VECTOR, SDLoc(N), RVT, ZeroOps);
LHS = DAG.getNode(ISD::BITCAST, dl, RVT, LHS);
SDValue Shuf = DAG.getVectorShuffle(RVT, dl, LHS, Zero, &Indices[0]);
return DAG.getNode(ISD::BITCAST, dl, VT, Shuf);
}
if (Ops.size() == LHS.getNumOperands())
- return DAG.getNode(ISD::BUILD_VECTOR, SDLoc(N),
- LHS.getValueType(), &Ops[0], Ops.size());
+ return DAG.getNode(ISD::BUILD_VECTOR, SDLoc(N), LHS.getValueType(), Ops);
+ }
+
+ // Type legalization might introduce new shuffles in the DAG.
+ // Fold (VBinOp (shuffle (A, Undef, Mask)), (shuffle (B, Undef, Mask)))
+ // -> (shuffle (VBinOp (A, B)), Undef, Mask).
+ if (LegalTypes && isa<ShuffleVectorSDNode>(LHS) &&
+ isa<ShuffleVectorSDNode>(RHS) && LHS.hasOneUse() && RHS.hasOneUse() &&
+ LHS.getOperand(1).getOpcode() == ISD::UNDEF &&
+ RHS.getOperand(1).getOpcode() == ISD::UNDEF) {
+ ShuffleVectorSDNode *SVN0 = cast<ShuffleVectorSDNode>(LHS);
+ ShuffleVectorSDNode *SVN1 = cast<ShuffleVectorSDNode>(RHS);
+
+ if (SVN0->getMask().equals(SVN1->getMask())) {
+ EVT VT = N->getValueType(0);
+ SDValue UndefVector = LHS.getOperand(1);
+ SDValue NewBinOp = DAG.getNode(N->getOpcode(), SDLoc(N), VT,
+ LHS.getOperand(0), RHS.getOperand(0));
+ AddUsersToWorkList(N);
+ return DAG.getVectorShuffle(VT, SDLoc(N), NewBinOp, UndefVector,
+ &SVN0->getMask()[0]);
+ }
}
return SDValue();
if (Ops.size() != N0.getNumOperands())
return SDValue();
- return DAG.getNode(ISD::BUILD_VECTOR, SDLoc(N),
- N0.getValueType(), &Ops[0], Ops.size());
+ return DAG.getNode(ISD::BUILD_VECTOR, SDLoc(N), N0.getValueType(), Ops);
}
SDValue DAGCombiner::SimplifySelect(SDLoc DL, SDValue N0,
if (ConstantFPSDNode *FV = dyn_cast<ConstantFPSDNode>(N3)) {
if (TLI.isTypeLegal(N2.getValueType()) &&
(TLI.getOperationAction(ISD::ConstantFP, N2.getValueType()) !=
- TargetLowering::Legal) &&
+ TargetLowering::Legal &&
+ !TLI.isFPImmLegal(TV->getValueAPF(), TV->getValueType(0)) &&
+ !TLI.isFPImmLegal(FV->getValueAPF(), FV->getValueType(0))) &&
// If both constants have multiple uses, then we won't need to do an
// extra load, they are likely around in registers for other users.
(TV->hasOneUse() || FV->hasOneUse())) {
// fold select C, 16, 0 -> shl C, 4
if (N2C && N3C && N3C->isNullValue() && N2C->getAPIntValue().isPowerOf2() &&
- TLI.getBooleanContents(N0.getValueType().isVector()) ==
- TargetLowering::ZeroOrOneBooleanContent) {
+ TLI.getBooleanContents(N0.getValueType()) ==
+ TargetLowering::ZeroOrOneBooleanContent) {
// If the caller doesn't want us to simplify this into a zext of a compare,
// don't do it.
/// multiplying by a magic number. See:
/// <http://the.wall.riscom.net/books/proc/ppc/cwg/code2.html>
SDValue DAGCombiner::BuildSDIV(SDNode *N) {
+ ConstantSDNode *C = isConstOrConstSplat(N->getOperand(1));
+ if (!C)
+ return SDValue();
+
+ // Avoid division by zero.
+ if (!C->getAPIntValue())
+ return SDValue();
+
std::vector<SDNode*> Built;
- SDValue S = TLI.BuildSDIV(N, DAG, LegalOperations, &Built);
+ SDValue S =
+ TLI.BuildSDIV(N, C->getAPIntValue(), DAG, LegalOperations, &Built);
- for (std::vector<SDNode*>::iterator ii = Built.begin(), ee = Built.end();
- ii != ee; ++ii)
- AddToWorkList(*ii);
+ for (SDNode *N : Built)
+ AddToWorkList(N);
return S;
}
-/// BuildUDIVSequence - Given an ISD::UDIV node expressing a divide by constant,
+/// BuildUDIV - Given an ISD::UDIV node expressing a divide by constant,
/// return a DAG expression to select that will generate the same value by
/// multiplying by a magic number. See:
/// <http://the.wall.riscom.net/books/proc/ppc/cwg/code2.html>
SDValue DAGCombiner::BuildUDIV(SDNode *N) {
+ ConstantSDNode *C = isConstOrConstSplat(N->getOperand(1));
+ if (!C)
+ return SDValue();
+
+ // Avoid division by zero.
+ if (!C->getAPIntValue())
+ return SDValue();
+
std::vector<SDNode*> Built;
- SDValue S = TLI.BuildUDIV(N, DAG, LegalOperations, &Built);
+ SDValue S =
+ TLI.BuildUDIV(N, C->getAPIntValue(), DAG, LegalOperations, &Built);
- for (std::vector<SDNode*>::iterator ii = Built.begin(), ee = Built.end();
- ii != ee; ++ii)
- AddToWorkList(*ii);
+ for (SDNode *N : Built)
+ AddToWorkList(N);
return S;
}
/// isAlias - Return true if there is any possibility that the two addresses
/// overlap.
-bool DAGCombiner::isAlias(SDValue Ptr1, int64_t Size1, bool IsVolatile1,
- const Value *SrcValue1, int SrcValueOffset1,
- unsigned SrcValueAlign1,
- const MDNode *TBAAInfo1,
- SDValue Ptr2, int64_t Size2, bool IsVolatile2,
- const Value *SrcValue2, int SrcValueOffset2,
- unsigned SrcValueAlign2,
- const MDNode *TBAAInfo2) const {
+bool DAGCombiner::isAlias(LSBaseSDNode *Op0, LSBaseSDNode *Op1) const {
// If they are the same then they must be aliases.
- if (Ptr1 == Ptr2) return true;
+ if (Op0->getBasePtr() == Op1->getBasePtr()) return true;
// If they are both volatile then they cannot be reordered.
- if (IsVolatile1 && IsVolatile2) return true;
+ if (Op0->isVolatile() && Op1->isVolatile()) return true;
// Gather base node and offset information.
SDValue Base1, Base2;
int64_t Offset1, Offset2;
const GlobalValue *GV1, *GV2;
const void *CV1, *CV2;
- bool isFrameIndex1 = FindBaseOffset(Ptr1, Base1, Offset1, GV1, CV1);
- bool isFrameIndex2 = FindBaseOffset(Ptr2, Base2, Offset2, GV2, CV2);
+ bool isFrameIndex1 = FindBaseOffset(Op0->getBasePtr(),
+ Base1, Offset1, GV1, CV1);
+ bool isFrameIndex2 = FindBaseOffset(Op1->getBasePtr(),
+ Base2, Offset2, GV2, CV2);
// If they have a same base address then check to see if they overlap.
if (Base1 == Base2 || (GV1 && (GV1 == GV2)) || (CV1 && (CV1 == CV2)))
- return !((Offset1 + Size1) <= Offset2 || (Offset2 + Size2) <= Offset1);
+ return !((Offset1 + (Op0->getMemoryVT().getSizeInBits() >> 3)) <= Offset2 ||
+ (Offset2 + (Op1->getMemoryVT().getSizeInBits() >> 3)) <= Offset1);
// It is possible for different frame indices to alias each other, mostly
// when tail call optimization reuses return address slots for arguments.
MachineFrameInfo *MFI = DAG.getMachineFunction().getFrameInfo();
Offset1 += MFI->getObjectOffset(cast<FrameIndexSDNode>(Base1)->getIndex());
Offset2 += MFI->getObjectOffset(cast<FrameIndexSDNode>(Base2)->getIndex());
- return !((Offset1 + Size1) <= Offset2 || (Offset2 + Size2) <= Offset1);
+ return !((Offset1 + (Op0->getMemoryVT().getSizeInBits() >> 3)) <= Offset2 ||
+ (Offset2 + (Op1->getMemoryVT().getSizeInBits() >> 3)) <= Offset1);
}
// Otherwise, if we know what the bases are, and they aren't identical, then
// compared to the size and offset of the access, we may be able to prove they
// do not alias. This check is conservative for now to catch cases created by
// splitting vector types.
- if ((SrcValueAlign1 == SrcValueAlign2) &&
- (SrcValueOffset1 != SrcValueOffset2) &&
- (Size1 == Size2) && (SrcValueAlign1 > Size1)) {
- int64_t OffAlign1 = SrcValueOffset1 % SrcValueAlign1;
- int64_t OffAlign2 = SrcValueOffset2 % SrcValueAlign1;
+ if ((Op0->getOriginalAlignment() == Op1->getOriginalAlignment()) &&
+ (Op0->getSrcValueOffset() != Op1->getSrcValueOffset()) &&
+ (Op0->getMemoryVT().getSizeInBits() >> 3 ==
+ Op1->getMemoryVT().getSizeInBits() >> 3) &&
+ (Op0->getOriginalAlignment() > Op0->getMemoryVT().getSizeInBits()) >> 3) {
+ int64_t OffAlign1 = Op0->getSrcValueOffset() % Op0->getOriginalAlignment();
+ int64_t OffAlign2 = Op1->getSrcValueOffset() % Op1->getOriginalAlignment();
// There is no overlap between these relatively aligned accesses of similar
// size, return no alias.
- if ((OffAlign1 + Size1) <= OffAlign2 || (OffAlign2 + Size2) <= OffAlign1)
+ if ((OffAlign1 + (Op0->getMemoryVT().getSizeInBits() >> 3)) <= OffAlign2 ||
+ (OffAlign2 + (Op1->getMemoryVT().getSizeInBits() >> 3)) <= OffAlign1)
return false;
}
CombinerAAOnlyFunc != DAG.getMachineFunction().getName())
UseAA = false;
#endif
- if (UseAA && SrcValue1 && SrcValue2) {
+ if (UseAA &&
+ Op0->getMemOperand()->getValue() && Op1->getMemOperand()->getValue()) {
// Use alias analysis information.
- int64_t MinOffset = std::min(SrcValueOffset1, SrcValueOffset2);
- int64_t Overlap1 = Size1 + SrcValueOffset1 - MinOffset;
- int64_t Overlap2 = Size2 + SrcValueOffset2 - MinOffset;
+ int64_t MinOffset = std::min(Op0->getSrcValueOffset(),
+ Op1->getSrcValueOffset());
+ int64_t Overlap1 = (Op0->getMemoryVT().getSizeInBits() >> 3) +
+ Op0->getSrcValueOffset() - MinOffset;
+ int64_t Overlap2 = (Op1->getMemoryVT().getSizeInBits() >> 3) +
+ Op1->getSrcValueOffset() - MinOffset;
AliasAnalysis::AliasResult AAResult =
- AA.alias(AliasAnalysis::Location(SrcValue1, Overlap1,
- UseTBAA ? TBAAInfo1 : nullptr),
- AliasAnalysis::Location(SrcValue2, Overlap2,
- UseTBAA ? TBAAInfo2 : nullptr));
+ AA.alias(AliasAnalysis::Location(Op0->getMemOperand()->getValue(),
+ Overlap1,
+ UseTBAA ? Op0->getTBAAInfo() : nullptr),
+ AliasAnalysis::Location(Op1->getMemOperand()->getValue(),
+ Overlap2,
+ UseTBAA ? Op1->getTBAAInfo() : nullptr));
if (AAResult == AliasAnalysis::NoAlias)
return false;
}
return true;
}
-bool DAGCombiner::isAlias(LSBaseSDNode *Op0, LSBaseSDNode *Op1) {
- SDValue Ptr0, Ptr1;
- int64_t Size0, Size1;
- bool IsVolatile0, IsVolatile1;
- const Value *SrcValue0, *SrcValue1;
- int SrcValueOffset0, SrcValueOffset1;
- unsigned SrcValueAlign0, SrcValueAlign1;
- const MDNode *SrcTBAAInfo0, *SrcTBAAInfo1;
- FindAliasInfo(Op0, Ptr0, Size0, IsVolatile0, SrcValue0, SrcValueOffset0,
- SrcValueAlign0, SrcTBAAInfo0);
- FindAliasInfo(Op1, Ptr1, Size1, IsVolatile1, SrcValue1, SrcValueOffset1,
- SrcValueAlign1, SrcTBAAInfo1);
- return isAlias(Ptr0, Size0, IsVolatile0, SrcValue0, SrcValueOffset0,
- SrcValueAlign0, SrcTBAAInfo0,
- Ptr1, Size1, IsVolatile1, SrcValue1, SrcValueOffset1,
- SrcValueAlign1, SrcTBAAInfo1);
-}
-
-/// FindAliasInfo - Extracts the relevant alias information from the memory
-/// node. Returns true if the operand was a nonvolatile load.
-bool DAGCombiner::FindAliasInfo(SDNode *N,
- SDValue &Ptr, int64_t &Size, bool &IsVolatile,
- const Value *&SrcValue,
- int &SrcValueOffset,
- unsigned &SrcValueAlign,
- const MDNode *&TBAAInfo) const {
- LSBaseSDNode *LS = cast<LSBaseSDNode>(N);
-
- Ptr = LS->getBasePtr();
- Size = LS->getMemoryVT().getSizeInBits() >> 3;
- IsVolatile = LS->isVolatile();
- SrcValue = LS->getSrcValue();
- SrcValueOffset = LS->getSrcValueOffset();
- SrcValueAlign = LS->getOriginalAlignment();
- TBAAInfo = LS->getTBAAInfo();
- return isa<LoadSDNode>(LS) && !IsVolatile;
-}
-
/// GatherAllAliases - Walk up chain skipping non-aliasing memory nodes,
/// looking for aliasing nodes and adding them to the Aliases vector.
void DAGCombiner::GatherAllAliases(SDNode *N, SDValue OriginalChain,
SmallPtrSet<SDNode *, 16> Visited; // Visited node set.
// Get alias information for node.
- SDValue Ptr;
- int64_t Size;
- bool IsVolatile;
- const Value *SrcValue;
- int SrcValueOffset;
- unsigned SrcValueAlign;
- const MDNode *SrcTBAAInfo;
- bool IsLoad = FindAliasInfo(N, Ptr, Size, IsVolatile, SrcValue,
- SrcValueOffset, SrcValueAlign, SrcTBAAInfo);
+ bool IsLoad = isa<LoadSDNode>(N) && !cast<LSBaseSDNode>(N)->isVolatile();
// Starting off.
Chains.push_back(OriginalChain);
case ISD::LOAD:
case ISD::STORE: {
// Get alias information for Chain.
- SDValue OpPtr;
- int64_t OpSize;
- bool OpIsVolatile;
- const Value *OpSrcValue;
- int OpSrcValueOffset;
- unsigned OpSrcValueAlign;
- const MDNode *OpSrcTBAAInfo;
- bool IsOpLoad = FindAliasInfo(Chain.getNode(), OpPtr, OpSize,
- OpIsVolatile, OpSrcValue, OpSrcValueOffset,
- OpSrcValueAlign,
- OpSrcTBAAInfo);
+ bool IsOpLoad = isa<LoadSDNode>(Chain.getNode()) &&
+ !cast<LSBaseSDNode>(Chain.getNode())->isVolatile();
// If chain is alias then stop here.
if (!(IsLoad && IsOpLoad) &&
- isAlias(Ptr, Size, IsVolatile, SrcValue, SrcValueOffset,
- SrcValueAlign, SrcTBAAInfo,
- OpPtr, OpSize, OpIsVolatile, OpSrcValue, OpSrcValueOffset,
- OpSrcValueAlign, OpSrcTBAAInfo)) {
+ isAlias(cast<LSBaseSDNode>(N), cast<LSBaseSDNode>(Chain.getNode()))) {
Aliases.push_back(Chain);
} else {
// Look further up the chain.
return Aliases[0];
// Construct a custom tailored token factor.
- return DAG.getNode(ISD::TokenFactor, SDLoc(N), MVT::Other,
- &Aliases[0], Aliases.size());
+ return DAG.getNode(ISD::TokenFactor, SDLoc(N), MVT::Other, Aliases);
}
// SelectionDAG::Combine - This is the entry point for the file.
projects / oota-llvm.git / blobdiff