#include "llvm/CodeGen/MachineFrameInfo.h"
#include "llvm/Analysis/AliasAnalysis.h"
#include "llvm/Target/TargetData.h"
+#include "llvm/Target/TargetFrameInfo.h"
#include "llvm/Target/TargetLowering.h"
#include "llvm/Target/TargetMachine.h"
#include "llvm/Target/TargetOptions.h"
bool NotExtCompare = false);
SDOperand SimplifySetCC(MVT::ValueType VT, SDOperand N0, SDOperand N1,
ISD::CondCode Cond, bool foldBooleans = true);
- bool SimplifyNodeWithTwoResults(SDNode *N, unsigned LoOp, unsigned HiOp);
+ SDOperand SimplifyNodeWithTwoResults(SDNode *N, unsigned LoOp,
+ unsigned HiOp);
SDOperand ConstantFoldBIT_CONVERTofBUILD_VECTOR(SDNode *, MVT::ValueType);
SDOperand BuildSDIV(SDNode *N);
SDOperand BuildUDIV(SDNode *N);
continue;
++NodesCombined;
+
// If we get back the same node we passed in, rather than a new node or
// zero, we know that the node must have defined multiple values and
// CombineTo was used. Since CombineTo takes care of the worklist
if (N->getNumValues() == RV.Val->getNumValues())
DAG.ReplaceAllUsesWith(N, RV.Val, &NowDead);
else {
- assert(N->getValueType(0) == RV.getValueType() && "Type mismatch");
+ assert(N->getValueType(0) == RV.getValueType() &&
+ N->getNumValues() == 1 && "Type mismatch");
SDOperand OpV = RV;
DAG.ReplaceAllUsesWith(N, &OpV, &NowDead);
}
// X%C to the equivalent of X-X/C*C.
if (N1C && !N1C->isNullValue()) {
SDOperand Div = DAG.getNode(ISD::SDIV, VT, N0, N1);
+ AddToWorkList(Div.Val);
SDOperand OptimizedDiv = combine(Div.Val);
if (OptimizedDiv.Val && OptimizedDiv.Val != Div.Val) {
SDOperand Mul = DAG.getNode(ISD::MUL, VT, OptimizedDiv, N1);
/// compute two values. LoOp and HiOp give the opcodes for the two computations
/// that are being performed. Return true if a simplification was made.
///
-bool DAGCombiner::SimplifyNodeWithTwoResults(SDNode *N,
- unsigned LoOp, unsigned HiOp) {
+SDOperand DAGCombiner::SimplifyNodeWithTwoResults(SDNode *N, unsigned LoOp,
+ unsigned HiOp) {
// If the high half is not needed, just compute the low half.
bool HiExists = N->hasAnyUseOfValue(1);
if (!HiExists &&
(!AfterLegalize ||
TLI.isOperationLegal(LoOp, N->getValueType(0)))) {
- DAG.ReplaceAllUsesOfValueWith(SDOperand(N, 0),
- DAG.getNode(LoOp, N->getValueType(0),
- N->op_begin(),
- N->getNumOperands()));
- return true;
+ SDOperand Res = DAG.getNode(LoOp, N->getValueType(0), N->op_begin(),
+ N->getNumOperands());
+ return CombineTo(N, Res, Res);
}
// If the low half is not needed, just compute the high half.
if (!LoExists &&
(!AfterLegalize ||
TLI.isOperationLegal(HiOp, N->getValueType(1)))) {
- DAG.ReplaceAllUsesOfValueWith(SDOperand(N, 1),
- DAG.getNode(HiOp, N->getValueType(1),
- N->op_begin(),
- N->getNumOperands()));
- return true;
+ SDOperand Res = DAG.getNode(HiOp, N->getValueType(1), N->op_begin(),
+ N->getNumOperands());
+ return CombineTo(N, Res, Res);
}
// If both halves are used, return as it is.
if (LoExists && HiExists)
- return false;
+ return SDOperand();
// If the two computed results can be simplified separately, separate them.
- bool RetVal = false;
if (LoExists) {
SDOperand Lo = DAG.getNode(LoOp, N->getValueType(0),
N->op_begin(), N->getNumOperands());
+ AddToWorkList(Lo.Val);
SDOperand LoOpt = combine(Lo.Val);
- if (LoOpt.Val && LoOpt != Lo &&
- TLI.isOperationLegal(LoOpt.getOpcode(), LoOpt.getValueType())) {
- RetVal = true;
- DAG.ReplaceAllUsesOfValueWith(SDOperand(N, 0), LoOpt);
- } else
- DAG.DeleteNode(Lo.Val);
+ if (LoOpt.Val && LoOpt.Val != Lo.Val &&
+ TLI.isOperationLegal(LoOpt.getOpcode(), LoOpt.getValueType()))
+ return CombineTo(N, LoOpt, LoOpt);
}
if (HiExists) {
SDOperand Hi = DAG.getNode(HiOp, N->getValueType(1),
N->op_begin(), N->getNumOperands());
+ AddToWorkList(Hi.Val);
SDOperand HiOpt = combine(Hi.Val);
if (HiOpt.Val && HiOpt != Hi &&
- TLI.isOperationLegal(HiOpt.getOpcode(), HiOpt.getValueType())) {
- RetVal = true;
- DAG.ReplaceAllUsesOfValueWith(SDOperand(N, 1), HiOpt);
- } else
- DAG.DeleteNode(Hi.Val);
+ TLI.isOperationLegal(HiOpt.getOpcode(), HiOpt.getValueType()))
+ return CombineTo(N, HiOpt, HiOpt);
}
-
- return RetVal;
+ return SDOperand();
}
SDOperand DAGCombiner::visitSMUL_LOHI(SDNode *N) {
-
- if (SimplifyNodeWithTwoResults(N, ISD::MUL, ISD::MULHS))
- return SDOperand();
+ SDOperand Res = SimplifyNodeWithTwoResults(N, ISD::MUL, ISD::MULHS);
+ if (Res.Val) return Res;
return SDOperand();
}
SDOperand DAGCombiner::visitUMUL_LOHI(SDNode *N) {
-
- if (SimplifyNodeWithTwoResults(N, ISD::MUL, ISD::MULHU))
- return SDOperand();
+ SDOperand Res = SimplifyNodeWithTwoResults(N, ISD::MUL, ISD::MULHU);
+ if (Res.Val) return Res;
return SDOperand();
}
SDOperand DAGCombiner::visitSDIVREM(SDNode *N) {
-
- if (SimplifyNodeWithTwoResults(N, ISD::SDIV, ISD::SREM))
- return SDOperand();
+ SDOperand Res = SimplifyNodeWithTwoResults(N, ISD::SDIV, ISD::SREM);
+ if (Res.Val) return Res;
return SDOperand();
}
SDOperand DAGCombiner::visitUDIVREM(SDNode *N) {
-
- if (SimplifyNodeWithTwoResults(N, ISD::UDIV, ISD::UREM))
- return SDOperand();
+ SDOperand Res = SimplifyNodeWithTwoResults(N, ISD::UDIV, ISD::UREM);
+ if (Res.Val) return Res;
return SDOperand();
}
static unsigned InferAlignment(SDOperand Ptr, SelectionDAG &DAG) {
// If this is a direct reference to a stack slot, use information about the
// stack slot's alignment.
+ int FrameIdx = 1 << 31;
+ int64_t FrameOffset = 0;
if (FrameIndexSDNode *FI = dyn_cast<FrameIndexSDNode>(Ptr)) {
- return DAG.getMachineFunction().getFrameInfo()->
- getObjectAlignment(FI->getIndex());
+ FrameIdx = FI->getIndex();
+ } else if (Ptr.getOpcode() == ISD::ADD &&
+ isa<ConstantSDNode>(Ptr.getOperand(1)) &&
+ isa<FrameIndexSDNode>(Ptr.getOperand(0))) {
+ FrameIdx = cast<FrameIndexSDNode>(Ptr.getOperand(0))->getIndex();
+ FrameOffset = Ptr.getConstantOperandVal(1);
+ }
+
+ if (FrameIdx != (1 << 31)) {
+ // FIXME: Handle FI+CST.
+ const MachineFrameInfo &MFI = *DAG.getMachineFunction().getFrameInfo();
+ if (MFI.isFixedObjectIndex(FrameIdx)) {
+ int64_t ObjectOffset = MFI.getObjectOffset(FrameIdx);
+
+ // The alignment of the frame index can be determined from its offset from
+ // the incoming frame position. If the frame object is at offset 32 and
+ // the stack is guaranteed to be 16-byte aligned, then we know that the
+ // object is 16-byte aligned.
+ unsigned StackAlign = DAG.getTarget().getFrameInfo()->getStackAlignment();
+ unsigned Align = MinAlign(ObjectOffset, StackAlign);
+
+ // Finally, the frame object itself may have a known alignment. Factor
+ // the alignment + offset into a new alignment. For example, if we know
+ // the FI is 8 byte aligned, but the pointer is 4 off, we really have a
+ // 4-byte alignment of the resultant pointer. Likewise align 4 + 4-byte
+ // offset = 4-byte alignment, align 4 + 1-byte offset = align 1, etc.
+ unsigned FIInfoAlign = MinAlign(MFI.getObjectAlignment(FrameIdx),
+ FrameOffset);
+ return std::max(Align, FIInfoAlign);
+ }
}
- // FIXME: Handle FI+CST.
-
return 0;
}
projects / oota-llvm.git / blobdiff