#include "llvm/LLVMContext.h"
#include "llvm/Target/TargetData.h"
#include "llvm/ADT/STLExtras.h"
+
using namespace llvm;
-/// ReuseOrCreateCast - Arange for there to be a cast of V to Ty at IP,
+/// ReuseOrCreateCast - Arrange for there to be a cast of V to Ty at IP,
/// reusing an existing cast if a suitable one exists, moving an existing
/// cast if a suitable one exists but isn't in the right place, or
-/// or creating a new one.
-Value *SCEVExpander::ReuseOrCreateCast(Value *V, const Type *Ty,
+/// creating a new one.
+Value *SCEVExpander::ReuseOrCreateCast(Value *V, Type *Ty,
Instruction::CastOps Op,
BasicBlock::iterator IP) {
// Check to see if there is already a cast!
for (Value::use_iterator UI = V->use_begin(), E = V->use_end();
- UI != E; ++UI)
- if ((*UI)->getType() == Ty)
- if (CastInst *CI = dyn_cast<CastInst>(cast<Instruction>(*UI)))
+ UI != E; ++UI) {
+ User *U = *UI;
+ if (U->getType() == Ty)
+ if (CastInst *CI = dyn_cast<CastInst>(U))
if (CI->getOpcode() == Op) {
// If the cast isn't where we want it, fix it.
if (BasicBlock::iterator(CI) != IP) {
rememberInstruction(CI);
return CI;
}
+ }
// Create a new cast.
Instruction *I = CastInst::Create(Op, V, Ty, V->getName(), IP);
/// InsertNoopCastOfTo - Insert a cast of V to the specified type,
/// which must be possible with a noop cast, doing what we can to share
/// the casts.
-Value *SCEVExpander::InsertNoopCastOfTo(Value *V, const Type *Ty) {
+Value *SCEVExpander::InsertNoopCastOfTo(Value *V, Type *Ty) {
Instruction::CastOps Op = CastInst::getCastOpcode(V, false, Ty, false);
assert((Op == Instruction::BitCast ||
Op == Instruction::PtrToInt ||
while ((isa<BitCastInst>(IP) &&
isa<Argument>(cast<BitCastInst>(IP)->getOperand(0)) &&
cast<BitCastInst>(IP)->getOperand(0) != A) ||
- isa<DbgInfoIntrinsic>(IP))
+ isa<DbgInfoIntrinsic>(IP) ||
+ isa<LandingPadInst>(IP))
++IP;
return ReuseOrCreateCast(A, Ty, Op, IP);
}
BasicBlock::iterator IP = I; ++IP;
if (InvokeInst *II = dyn_cast<InvokeInst>(I))
IP = II->getNormalDest()->begin();
- while (isa<PHINode>(IP) || isa<DbgInfoIntrinsic>(IP)) ++IP;
+ while (isa<PHINode>(IP) || isa<DbgInfoIntrinsic>(IP) ||
+ isa<LandingPadInst>(IP))
+ ++IP;
return ReuseOrCreateCast(I, Ty, Op, IP);
}
}
// If we haven't found this binop, insert it.
- Value *BO = Builder.CreateBinOp(Opcode, LHS, RHS, "tmp");
+ Instruction *BO = cast<Instruction>(Builder.CreateBinOp(Opcode, LHS, RHS));
+ BO->setDebugLoc(SaveInsertPt->getDebugLoc());
rememberInstruction(BO);
// Restore the original insert point.
const SCEV *Start = A->getStart();
if (!FactorOutConstant(Start, Remainder, Factor, SE, TD))
return false;
- S = SE.getAddRecExpr(Start, Step, A->getLoop());
+ // FIXME: can use A->getNoWrapFlags(FlagNW)
+ S = SE.getAddRecExpr(Start, Step, A->getLoop(), SCEV::FlagAnyWrap);
return true;
}
/// the list.
///
static void SimplifyAddOperands(SmallVectorImpl<const SCEV *> &Ops,
- const Type *Ty,
+ Type *Ty,
ScalarEvolution &SE) {
unsigned NumAddRecs = 0;
for (unsigned i = Ops.size(); i > 0 && isa<SCEVAddRecExpr>(Ops[i-1]); --i)
/// into GEP indices.
///
static void SplitAddRecs(SmallVectorImpl<const SCEV *> &Ops,
- const Type *Ty,
+ Type *Ty,
ScalarEvolution &SE) {
// Find the addrecs.
SmallVector<const SCEV *, 8> AddRecs;
const SCEV *Zero = SE.getConstant(Ty, 0);
AddRecs.push_back(SE.getAddRecExpr(Zero,
A->getStepRecurrence(SE),
- A->getLoop()));
+ A->getLoop(),
+ // FIXME: A->getNoWrapFlags(FlagNW)
+ SCEV::FlagAnyWrap));
if (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(Start)) {
Ops[i] = Zero;
Ops.append(Add->op_begin(), Add->op_end());
///
Value *SCEVExpander::expandAddToGEP(const SCEV *const *op_begin,
const SCEV *const *op_end,
- const PointerType *PTy,
- const Type *Ty,
+ PointerType *PTy,
+ Type *Ty,
Value *V) {
- const Type *ElTy = PTy->getElementType();
+ Type *ElTy = PTy->getElementType();
SmallVector<Value *, 4> GepIndices;
SmallVector<const SCEV *, 8> Ops(op_begin, op_end);
bool AnyNonZeroIndices = false;
GepIndices.push_back(Scaled);
// Collect struct field index operands.
- while (const StructType *STy = dyn_cast<StructType>(ElTy)) {
+ while (StructType *STy = dyn_cast<StructType>(ElTy)) {
bool FoundFieldNo = false;
// An empty struct has no fields.
if (STy->getNumElements() == 0) break;
// appropriate struct type.
for (unsigned i = 0, e = Ops.size(); i != e; ++i)
if (const SCEVUnknown *U = dyn_cast<SCEVUnknown>(Ops[i])) {
- const Type *CTy;
+ Type *CTy;
Constant *FieldNo;
if (U->isOffsetOf(CTy, FieldNo) && CTy == STy) {
GepIndices.push_back(FieldNo);
}
}
- if (
const ArrayType *ATy = dyn_cast<ArrayType>(ElTy))
+ if (ArrayType *ATy = dyn_cast<ArrayType>(ElTy))
ElTy = ATy->getElementType();
else
break;
// Fold a GEP with constant operands.
if (Constant *CLHS = dyn_cast<Constant>(V))
if (Constant *CRHS = dyn_cast<Constant>(Idx))
- return ConstantExpr::getGetElementPtr(CLHS, &CRHS, 1);
+ return ConstantExpr::getGetElementPtr(CLHS, CRHS);
// Do a quick scan to see if we have this GEP nearby. If so, reuse it.
unsigned ScanLimit = 6;
if (V->getType() != PTy)
Casted = InsertNoopCastOfTo(Casted, PTy);
Value *GEP = Builder.CreateGEP(Casted,
- GepIndices.begin(),
- GepIndices.end(),
+ GepIndices,
"scevgep");
Ops.push_back(SE.getUnknown(GEP));
rememberInstruction(GEP);
return A; // Arbitrarily break the tie.
}
-/// GetRelevantLoop - Get the most relevant loop associated with the given
+/// getRelevantLoop - Get the most relevant loop associated with the given
/// expression, according to PickMostRelevantLoop.
-static const Loop *GetRelevantLoop(const SCEV *S, LoopInfo &LI,
- DominatorTree &DT) {
+const Loop *SCEVExpander::getRelevantLoop(const SCEV *S) {
+ // Test whether we've already computed the most relevant loop for this SCEV.
+ std::pair<DenseMap<const SCEV *, const Loop *>::iterator, bool> Pair =
+ RelevantLoops.insert(std::make_pair(S, static_cast<const Loop *>(0)));
+ if (!Pair.second)
+ return Pair.first->second;
+
if (isa<SCEVConstant>(S))
+ // A constant has no relevant loops.
return 0;
if (const SCEVUnknown *U = dyn_cast<SCEVUnknown>(S)) {
if (const Instruction *I = dyn_cast<Instruction>(U->getValue()))
- return LI.getLoopFor(I->getParent());
+ return Pair.first->second = SE.LI->getLoopFor(I->getParent());
+ // A non-instruction has no relevant loops.
return 0;
}
if (const SCEVNAryExpr *N = dyn_cast<SCEVNAryExpr>(S)) {
L = AR->getLoop();
for (SCEVNAryExpr::op_iterator I = N->op_begin(), E = N->op_end();
I != E; ++I)
- L = PickMostRelevantLoop(L, GetRelevantLoop(*I, LI, DT), DT);
- return L;
+ L = PickMostRelevantLoop(L, getRelevantLoop(*I), *SE.DT);
+ return RelevantLoops[N] = L;
+ }
+ if (const SCEVCastExpr *C = dyn_cast<SCEVCastExpr>(S)) {
+ const Loop *Result = getRelevantLoop(C->getOperand());
+ return RelevantLoops[C] = Result;
+ }
+ if (const SCEVUDivExpr *D = dyn_cast<SCEVUDivExpr>(S)) {
+ const Loop *Result =
+ PickMostRelevantLoop(getRelevantLoop(D->getLHS()),
+ getRelevantLoop(D->getRHS()),
+ *SE.DT);
+ return RelevantLoops[D] = Result;
}
- if (const SCEVCastExpr *C = dyn_cast<SCEVCastExpr>(S))
- return GetRelevantLoop(C->getOperand(), LI, DT);
- if (const SCEVUDivExpr *D = dyn_cast<SCEVUDivExpr>(S))
- return PickMostRelevantLoop(GetRelevantLoop(D->getLHS(), LI, DT),
- GetRelevantLoop(D->getRHS(), LI, DT),
- DT);
llvm_unreachable("Unexpected SCEV type!");
+ return 0;
}
namespace {
bool operator()(std::pair<const Loop *, const SCEV *> LHS,
std::pair<const Loop *, const SCEV *> RHS) const {
+ // Keep pointer operands sorted at the end.
+ if (LHS.second->getType()->isPointerTy() !=
+ RHS.second->getType()->isPointerTy())
+ return LHS.second->getType()->isPointerTy();
+
// Compare loops with PickMostRelevantLoop.
if (LHS.first != RHS.first)
return PickMostRelevantLoop(LHS.first, RHS.first, DT) != LHS.first;
}
Value *SCEVExpander::visitAddExpr(const SCEVAddExpr *S) {
- const Type *Ty = SE.getEffectiveSCEVType(S->getType());
+ Type *Ty = SE.getEffectiveSCEVType(S->getType());
// Collect all the add operands in a loop, along with their associated loops.
// Iterate in reverse so that constants are emitted last, all else equal, and
SmallVector<std::pair<const Loop *, const SCEV *>, 8> OpsAndLoops;
for (std::reverse_iterator<SCEVAddExpr::op_iterator> I(S->op_end()),
E(S->op_begin()); I != E; ++I)
- OpsAndLoops.push_back(std::make_pair(GetRelevantLoop(*I, *SE.LI, *SE.DT),
- *I));
+ OpsAndLoops.push_back(std::make_pair(getRelevantLoop(*I), *I));
// Sort by loop. Use a stable sort so that constants follow non-constants and
// pointer operands precede non-pointer operands.
// This is the first operand. Just expand it.
Sum = expand(Op);
++I;
- } else if (
const PointerType *PTy = dyn_cast<PointerType>(Sum->getType())) {
+ } else if (PointerType *PTy = dyn_cast<PointerType>(Sum->getType())) {
// The running sum expression is a pointer. Try to form a getelementptr
// at this level with that as the base.
SmallVector<const SCEV *, 4> NewOps;
- for (; I != E && I->first == CurLoop; ++I)
- NewOps.push_back(I->second);
+ for (; I != E && I->first == CurLoop; ++I) {
+ // If the operand is SCEVUnknown and not instructions, peek through
+ // it, to enable more of it to be folded into the GEP.
+ const SCEV *X = I->second;
+ if (const SCEVUnknown *U = dyn_cast<SCEVUnknown>(X))
+ if (!isa<Instruction>(U->getValue()))
+ X = SE.getSCEV(U->getValue());
+ NewOps.push_back(X);
+ }
Sum = expandAddToGEP(NewOps.begin(), NewOps.end(), PTy, Ty, Sum);
- } else if (
const PointerType *PTy = dyn_cast<PointerType>(Op->getType())) {
+ } else if (PointerType *PTy = dyn_cast<PointerType>(Op->getType())) {
// The running sum is an integer, and there's a pointer at this level.
// Try to form a getelementptr. If the running sum is instructions,
// use a SCEVUnknown to avoid re-analyzing them.
}
Value *SCEVExpander::visitMulExpr(const SCEVMulExpr *S) {
- const Type *Ty = SE.getEffectiveSCEVType(S->getType());
+ Type *Ty = SE.getEffectiveSCEVType(S->getType());
// Collect all the mul operands in a loop, along with their associated loops.
// Iterate in reverse so that constants are emitted last, all else equal.
SmallVector<std::pair<const Loop *, const SCEV *>, 8> OpsAndLoops;
for (std::reverse_iterator<SCEVMulExpr::op_iterator> I(S->op_end()),
E(S->op_begin()); I != E; ++I)
- OpsAndLoops.push_back(std::make_pair(GetRelevantLoop(*I, *SE.LI, *SE.DT),
- *I));
+ OpsAndLoops.push_back(std::make_pair(getRelevantLoop(*I), *I));
// Sort by loop. Use a stable sort so that constants follow non-constants.
std::stable_sort(OpsAndLoops.begin(), OpsAndLoops.end(), LoopCompare(*SE.DT));
}
Value *SCEVExpander::visitUDivExpr(const SCEVUDivExpr *S) {
- const Type *Ty = SE.getEffectiveSCEVType(S->getType());
+ Type *Ty = SE.getEffectiveSCEVType(S->getType());
Value *LHS = expandCodeFor(S->getLHS(), Ty);
if (const SCEVConstant *SC = dyn_cast<SCEVConstant>(S->getRHS())) {
Rest = SE.getAddExpr(Rest,
SE.getAddRecExpr(SE.getConstant(A->getType(), 0),
A->getStepRecurrence(SE),
- A->getLoop()));
+ A->getLoop(),
+ // FIXME: A->getNoWrapFlags(FlagNW)
+ SCEV::FlagAnyWrap));
}
if (const SCEVAddExpr *A = dyn_cast<SCEVAddExpr>(Base)) {
Base = A->getOperand(A->getNumOperands()-1);
PHINode *
SCEVExpander::getAddRecExprPHILiterally(const SCEVAddRecExpr *Normalized,
const Loop *L,
- const Type *ExpandTy,
- const Type *IntTy) {
+ Type *ExpandTy,
+ Type *IntTy) {
+ assert((!IVIncInsertLoop||IVIncInsertPos) && "Uninitialized insert position");
+
// Reuse a previously-inserted PHI, if present.
for (BasicBlock::iterator I = L->getHeader()->begin();
PHINode *PN = dyn_cast<PHINode>(I); ++I)
// loop already visited by LSR for example, but it wouldn't have
// to be.
do {
- if (IncV->getNumOperands() == 0 || isa<PHINode>(IncV)) {
+ if (IncV->getNumOperands() == 0 || isa<PHINode>(IncV) ||
+ (isa<CastInst>(IncV) && !isa<BitCastInst>(IncV))) {
IncV = 0;
break;
}
// If any of the operands don't dominate the insert position, bail.
// Addrec operands are always loop-invariant, so this can only happen
// if there are instructions which haven't been hoisted.
- for (User::op_iterator OI = IncV->op_begin()+1,
- OE = IncV->op_end(); OI != OE; ++OI)
- if (Instruction *OInst = dyn_cast<Instruction>(OI))
- if (!SE.DT->dominates(OInst, IVIncInsertPos)) {
- IncV = 0;
- break;
- }
+ if (L == IVIncInsertLoop) {
+ for (User::op_iterator OI = IncV->op_begin()+1,
+ OE = IncV->op_end(); OI != OE; ++OI)
+ if (Instruction *OInst = dyn_cast<Instruction>(OI))
+ if (!SE.DT->dominates(OInst, IVIncInsertPos)) {
+ IncV = 0;
+ break;
+ }
+ }
if (!IncV)
break;
// Advance to the next instruction.
Value *StartV = expandCodeFor(Normalized->getStart(), ExpandTy,
L->getHeader()->begin());
+ // StartV must be hoisted into L's preheader to dominate the new phi.
+ assert(!isa<Instruction>(StartV) ||
+ SE.DT->properlyDominates(cast<Instruction>(StartV)->getParent(),
+ L->getHeader()));
+
// Expand code for the step value. Insert instructions right before the
// terminator corresponding to the back-edge. Do this before creating the PHI
// so that PHI reuse code doesn't see an incomplete PHI. If the stride is
Value *StepV = expandCodeFor(Step, IntTy, L->getHeader()->begin());
// Create the PHI.
- Builder.SetInsertPoint(L->getHeader(), L->getHeader()->begin());
- PHINode *PN = Builder.CreatePHI(ExpandTy, "lsr.iv");
+ BasicBlock *Header = L->getHeader();
+ Builder.SetInsertPoint(Header, Header->begin());
+ pred_iterator HPB = pred_begin(Header), HPE = pred_end(Header);
+ PHINode *PN = Builder.CreatePHI(ExpandTy, std::distance(HPB, HPE),
+ Twine(IVName) + ".iv");
rememberInstruction(PN);
// Create the step instructions and populate the PHI.
- BasicBlock *Header = L->getHeader();
- for (pred_iterator HPI = pred_begin(Header), HPE = pred_end(Header);
- HPI != HPE; ++HPI) {
+ for (pred_iterator HPI = HPB; HPI != HPE; ++HPI) {
BasicBlock *Pred = *HPI;
// Add a start value.
// at IVIncInsertPos.
Instruction *InsertPos = L == IVIncInsertLoop ?
IVIncInsertPos : Pred->getTerminator();
- Builder.SetInsertPoint(InsertPos->getParent(), InsertPos);
+ Builder.SetInsertPoint(InsertPos);
Value *IncV;
// If the PHI is a pointer, use a GEP, otherwise use an add or sub.
if (isPointer) {
-
const PointerType *GEPPtrTy = cast<PointerType>(ExpandTy);
+ PointerType *GEPPtrTy = cast<PointerType>(ExpandTy);
// If the step isn't constant, don't use an implicitly scaled GEP, because
// that would require a multiply inside the loop.
if (!isa<ConstantInt>(StepV))
const SCEV *const StepArray[1] = { SE.getSCEV(StepV) };
IncV = expandAddToGEP(StepArray, StepArray+1, GEPPtrTy, IntTy, PN);
if (IncV->getType() != PN->getType()) {
- IncV = Builder.CreateBitCast(IncV, PN->getType(), "tmp");
+ IncV = Builder.CreateBitCast(IncV, PN->getType());
rememberInstruction(IncV);
}
} else {
IncV = isNegative ?
- Builder.CreateSub(PN, StepV, "lsr.iv.next") :
- Builder.CreateAdd(PN, StepV, "lsr.iv.next");
+ Builder.CreateSub(PN, StepV, Twine(IVName) + ".iv.next") :
+ Builder.CreateAdd(PN, StepV, Twine(IVName) + ".iv.next");
rememberInstruction(IncV);
}
PN->addIncoming(IncV, Pred);
}
Value *SCEVExpander::expandAddRecExprLiterally(const SCEVAddRecExpr *S) {
- const Type *STy = S->getType();
- const Type *IntTy = SE.getEffectiveSCEVType(STy);
+ Type *STy = S->getType();
+ Type *IntTy = SE.getEffectiveSCEVType(STy);
const Loop *L = S->getLoop();
// Determine a normalized form of this expression, which is the expression
// Strip off any non-loop-dominating component from the addrec start.
const SCEV *Start = Normalized->getStart();
const SCEV *PostLoopOffset = 0;
- if (!Start->properlyDominates(L->getHeader(), SE.DT)) {
+ if (!SE.properlyDominates(Start, L->getHeader())) {
PostLoopOffset = Start;
Start = SE.getConstant(Normalized->getType(), 0);
- Normalized =
- cast<SCEVAddRecExpr>(SE.getAddRecExpr(Start,
- Normalized->getStepRecurrence(SE),
- Normalized->getLoop()));
+ Normalized = cast<SCEVAddRecExpr>(
+ SE.getAddRecExpr(Start, Normalized->getStepRecurrence(SE),
+ Normalized->getLoop(),
+ // FIXME: Normalized->getNoWrapFlags(FlagNW)
+ SCEV::FlagAnyWrap));
}
// Strip off any non-loop-dominating component from the addrec step.
const SCEV *Step = Normalized->getStepRecurrence(SE);
const SCEV *PostLoopScale = 0;
- if (!Step->dominates(L->getHeader(), SE.DT)) {
+ if (!SE.dominates(Step, L->getHeader())) {
PostLoopScale = Step;
Step = SE.getConstant(Normalized->getType(), 1);
Normalized =
cast<SCEVAddRecExpr>(SE.getAddRecExpr(Start, Step,
- Normalized->getLoop()));
+ Normalized->getLoop(),
+ // FIXME: Normalized
+ // ->getNoWrapFlags(FlagNW)
+ SCEV::FlagAnyWrap));
}
// Expand the core addrec. If we need post-loop scaling, force it to
// expand to an integer type to avoid the need for additional casting.
- const Type *ExpandTy = PostLoopScale ? IntTy : STy;
+ Type *ExpandTy = PostLoopScale ? IntTy : STy;
PHINode *PN = getAddRecExprPHILiterally(Normalized, L, ExpandTy, IntTy);
// Accommodate post-inc mode, if necessary.
// Re-apply any non-loop-dominating offset.
if (PostLoopOffset) {
- if (
const PointerType *PTy = dyn_cast<PointerType>(ExpandTy)) {
+ if (PointerType *PTy = dyn_cast<PointerType>(ExpandTy)) {
const SCEV *const OffsetArray[1] = { PostLoopOffset };
Result = expandAddToGEP(OffsetArray, OffsetArray+1, PTy, IntTy, Result);
} else {
Value *SCEVExpander::visitAddRecExpr(const SCEVAddRecExpr *S) {
if (!CanonicalMode) return expandAddRecExprLiterally(S);
- const Type *Ty = SE.getEffectiveSCEVType(S->getType());
+ Type *Ty = SE.getEffectiveSCEVType(S->getType());
const Loop *L = S->getLoop();
// First check for an existing canonical IV in a suitable type.
PHINode *CanonicalIV = 0;
if (PHINode *PN = L->getCanonicalInductionVariable())
- if (SE.isSCEVable(PN->getType()) &&
- SE.getEffectiveSCEVType(PN->getType())->isIntegerTy() &&
- SE.getTypeSizeInBits(PN->getType()) >= SE.getTypeSizeInBits(Ty))
+ if (SE.getTypeSizeInBits(PN->getType()) >= SE.getTypeSizeInBits(Ty))
CanonicalIV = PN;
// Rewrite an AddRec in terms of the canonical induction variable, if
SmallVector<const SCEV *, 4> NewOps(S->getNumOperands());
for (unsigned i = 0, e = S->getNumOperands(); i != e; ++i)
NewOps[i] = SE.getAnyExtendExpr(S->op_begin()[i], CanonicalIV->getType());
- Value *V = expand(SE.getAddRecExpr(NewOps, S->getLoop()));
+ Value *V = expand(SE.getAddRecExpr(NewOps, S->getLoop(),
+ // FIXME: S->getNoWrapFlags(FlagNW)
+ SCEV::FlagAnyWrap));
BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
BasicBlock::iterator NewInsertPt =
llvm::next(BasicBlock::iterator(cast<Instruction>(V)));
- while (isa<PHINode>(NewInsertPt) || isa<DbgInfoIntrinsic>(NewInsertPt))
+ while (isa<PHINode>(NewInsertPt) || isa<DbgInfoIntrinsic>(NewInsertPt) ||
+ isa<LandingPadInst>(NewInsertPt))
++NewInsertPt;
V = expandCodeFor(SE.getTruncateExpr(SE.getUnknown(V), Ty), 0,
NewInsertPt);
if (!S->getStart()->isZero()) {
SmallVector<const SCEV *, 4> NewOps(S->op_begin(), S->op_end());
NewOps[0] = SE.getConstant(Ty, 0);
- const SCEV *Rest = SE.getAddRecExpr(NewOps, L);
+ // FIXME: can use S->getNoWrapFlags()
+ const SCEV *Rest = SE.getAddRecExpr(NewOps, L, SCEV::FlagAnyWrap);
// Turn things like ptrtoint+arithmetic+inttoptr into GEP. See the
// comments on expandAddToGEP for details.
// Dig into the expression to find the pointer base for a GEP.
ExposePointerBase(Base, RestArray[0], SE);
// If we found a pointer, expand the AddRec with a GEP.
- if (
const PointerType *PTy = dyn_cast<PointerType>(Base->getType())) {
+ if (PointerType *PTy = dyn_cast<PointerType>(Base->getType())) {
// Make sure the Base isn't something exotic, such as a multiplied
// or divided pointer value. In those cases, the result type isn't
// actually a pointer type.
SE.getUnknown(expand(Rest))));
}
- // {0,+,1} --> Insert a canonical induction variable into the loop!
- if (S->isAffine() && S->getOperand(1)->isOne()) {
- // If there's a canonical IV, just use it.
- if (CanonicalIV) {
- assert(Ty == SE.getEffectiveSCEVType(CanonicalIV->getType()) &&
- "IVs with types different from the canonical IV should "
- "already have been handled!");
- return CanonicalIV;
- }
-
+ // If we don't yet have a canonical IV, create one.
+ if (!CanonicalIV) {
// Create and insert the PHI node for the induction variable in the
// specified loop.
BasicBlock *Header = L->getHeader();
- PHINode *PN = PHINode::Create(Ty, "indvar", Header->begin());
- rememberInstruction(PN);
+ pred_iterator HPB = pred_begin(Header), HPE = pred_end(Header);
+ CanonicalIV = PHINode::Create(Ty, std::distance(HPB, HPE), "indvar",
+ Header->begin());
+ rememberInstruction(CanonicalIV);
Constant *One = ConstantInt::get(Ty, 1);
- for (pred_iterator HPI = pred_begin(Header), HPE = pred_end(Header);
- HPI != HPE; ++HPI) {
+ for (pred_iterator HPI = HPB; HPI != HPE; ++HPI) {
BasicBlock *HP = *HPI;
if (L->contains(HP)) {
// Insert a unit add instruction right before the terminator
// corresponding to the back-edge.
- Instruction *Add = BinaryOperator::CreateAdd(PN, One, "indvar.next",
- HP->getTerminator());
+ Instruction *Add = BinaryOperator::CreateAdd(CanonicalIV, One,
+ "indvar.next",
+ HP->getTerminator());
+ Add->setDebugLoc(HP->getTerminator()->getDebugLoc());
rememberInstruction(Add);
- PN->addIncoming(Add, HP);
+ CanonicalIV->addIncoming(Add, HP);
} else {
- PN->addIncoming(Constant::getNullValue(Ty), HP);
+ CanonicalIV->addIncoming(Constant::getNullValue(Ty), HP);
}
}
}
+ // {0,+,1} --> Insert a canonical induction variable into the loop!
+ if (S->isAffine() && S->getOperand(1)->isOne()) {
+ assert(Ty == SE.getEffectiveSCEVType(CanonicalIV->getType()) &&
+ "IVs with types different from the canonical IV should "
+ "already have been handled!");
+ return CanonicalIV;
+ }
+
// {0,+,F} --> {0,+,1} * F
- // Get the canonical induction variable I for this loop.
- Value *I = CanonicalIV ?
- CanonicalIV :
- getOrInsertCanonicalInductionVariable(L, Ty);
// If this is a simple linear addrec, emit it now as a special case.
if (S->isAffine()) // {0,+,F} --> i*F
return
expand(SE.getTruncateOrNoop(
- SE.getMulExpr(SE.getUnknown(I),
+ SE.getMulExpr(SE.getUnknown(CanonicalIV),
SE.getNoopOrAnyExtend(S->getOperand(1),
- I->getType())),
+ CanonicalIV->getType())),
Ty));
// If this is a chain of recurrences, turn it into a closed form, using the
// folders, then expandCodeFor the closed form. This allows the folders to
// simplify the expression without having to build a bunch of special code
// into this folder.
- const SCEV *IH = SE.getUnknown(I); // Get I as a "symbolic" SCEV.
+ const SCEV *IH = SE.getUnknown(CanonicalIV); // Get I as a "symbolic" SCEV.
// Promote S up to the canonical IV type, if the cast is foldable.
const SCEV *NewS = S;
- const SCEV *Ext = SE.getNoopOrAnyExtend(S, I->getType());
+ const SCEV *Ext = SE.getNoopOrAnyExtend(S, CanonicalIV->getType());
if (isa<SCEVAddRecExpr>(Ext))
NewS = Ext;
}
Value *SCEVExpander::visitTruncateExpr(const SCEVTruncateExpr *S) {
- const Type *Ty = SE.getEffectiveSCEVType(S->getType());
+ Type *Ty = SE.getEffectiveSCEVType(S->getType());
Value *V = expandCodeFor(S->getOperand(),
SE.getEffectiveSCEVType(S->getOperand()->getType()));
- Value *I = Builder.CreateTrunc(V, Ty, "tmp");
+ Value *I = Builder.CreateTrunc(V, Ty);
rememberInstruction(I);
return I;
}
Value *SCEVExpander::visitZeroExtendExpr(const SCEVZeroExtendExpr *S) {
- const Type *Ty = SE.getEffectiveSCEVType(S->getType());
+ Type *Ty = SE.getEffectiveSCEVType(S->getType());
Value *V = expandCodeFor(S->getOperand(),
SE.getEffectiveSCEVType(S->getOperand()->getType()));
- Value *I = Builder.CreateZExt(V, Ty, "tmp");
+ Value *I = Builder.CreateZExt(V, Ty);
rememberInstruction(I);
return I;
}
Value *SCEVExpander::visitSignExtendExpr(const SCEVSignExtendExpr *S) {
- const Type *Ty = SE.getEffectiveSCEVType(S->getType());
+ Type *Ty = SE.getEffectiveSCEVType(S->getType());
Value *V = expandCodeFor(S->getOperand(),
SE.getEffectiveSCEVType(S->getOperand()->getType()));
- Value *I = Builder.CreateSExt(V, Ty, "tmp");
+ Value *I = Builder.CreateSExt(V, Ty);
rememberInstruction(I);
return I;
}
Value *SCEVExpander::visitSMaxExpr(const SCEVSMaxExpr *S) {
Value *LHS = expand(S->getOperand(S->getNumOperands()-1));
- const Type *Ty = LHS->getType();
+ Type *Ty = LHS->getType();
for (int i = S->getNumOperands()-2; i >= 0; --i) {
// In the case of mixed integer and pointer types, do the
// rest of the comparisons as integer.
LHS = InsertNoopCastOfTo(LHS, Ty);
}
Value *RHS = expandCodeFor(S->getOperand(i), Ty);
- Value *ICmp = Builder.CreateICmpSGT(LHS, RHS, "tmp");
+ Value *ICmp = Builder.CreateICmpSGT(LHS, RHS);
rememberInstruction(ICmp);
Value *Sel = Builder.CreateSelect(ICmp, LHS, RHS, "smax");
rememberInstruction(Sel);
Value *SCEVExpander::visitUMaxExpr(const SCEVUMaxExpr *S) {
Value *LHS = expand(S->getOperand(S->getNumOperands()-1));
- const Type *Ty = LHS->getType();
+ Type *Ty = LHS->getType();
for (int i = S->getNumOperands()-2; i >= 0; --i) {
// In the case of mixed integer and pointer types, do the
// rest of the comparisons as integer.
LHS = InsertNoopCastOfTo(LHS, Ty);
}
Value *RHS = expandCodeFor(S->getOperand(i), Ty);
- Value *ICmp = Builder.CreateICmpUGT(LHS, RHS, "tmp");
+ Value *ICmp = Builder.CreateICmpUGT(LHS, RHS);
rememberInstruction(ICmp);
Value *Sel = Builder.CreateSelect(ICmp, LHS, RHS, "umax");
rememberInstruction(Sel);
return LHS;
}
-Value *SCEVExpander::expandCodeFor(const SCEV *SH, const Type *Ty,
+Value *SCEVExpander::expandCodeFor(const SCEV *SH, Type *Ty,
Instruction *I) {
BasicBlock::iterator IP = I;
while (isInsertedInstruction(IP) || isa<DbgInfoIntrinsic>(IP))
return expandCodeFor(SH, Ty);
}
-Value *SCEVExpander::expandCodeFor(const SCEV *SH, const Type *Ty) {
+Value *SCEVExpander::expandCodeFor(const SCEV *SH, Type *Ty) {
// Expand the code for this SCEV.
Value *V = expand(SH);
if (Ty) {
Instruction *InsertPt = Builder.GetInsertPoint();
for (Loop *L = SE.LI->getLoopFor(Builder.GetInsertBlock()); ;
L = L->getParentLoop())
- if (S->isLoopInvariant(L)) {
+ if (SE.isLoopInvariant(S, L)) {
if (!L) break;
if (BasicBlock *Preheader = L->getLoopPreheader())
InsertPt = Preheader->getTerminator();
// If the SCEV is computable at this level, insert it into the header
// after the PHIs (and after any other instructions that we've inserted
// there) so that it is guaranteed to dominate any user inside the loop.
- if (L && S->hasComputableLoopEvolution(L) && !PostIncLoops.count(L))
- InsertPt = L->getHeader()->getFirstNonPHI();
+ if (L && SE.hasComputableLoopEvolution(S, L) && !PostIncLoops.count(L))
+ InsertPt = L->getHeader()->getFirstInsertionPt();
while (isInsertedInstruction(InsertPt) || isa<DbgInfoIntrinsic>(InsertPt))
InsertPt = llvm::next(BasicBlock::iterator(InsertPt));
break;
InsertedValues.insert(I);
// If we just claimed an existing instruction and that instruction had
- // been the insert point, adjust the insert point forward so that
+ // been the insert point, adjust the insert point forward so that
// subsequently inserted code will be dominated.
if (Builder.GetInsertPoint() == I) {
BasicBlock::iterator It = cast<Instruction>(I);
/// canonical induction variable of the specified type for the specified
/// loop (inserting one if there is none). A canonical induction variable
/// starts at zero and steps by one on each iteration.
-Value *
+PHINode *
SCEVExpander::getOrInsertCanonicalInductionVariable(const Loop *L,
- const Type *Ty) {
+ Type *Ty) {
assert(Ty->isIntegerTy() && "Can only insert integer induction variables!");
+
+ // Build a SCEV for {0,+,1}<L>.
+ // Conservatively use FlagAnyWrap for now.
const SCEV *H = SE.getAddRecExpr(SE.getConstant(Ty, 0),
- SE.getConstant(Ty, 1), L);
+ SE.getConstant(Ty, 1), L, SCEV::FlagAnyWrap);
+
+ // Emit code for it.
BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
- Value *V = expandCodeFor(H, 0, L->getHeader()->begin());
+ PHINode *V = cast<PHINode>(expandCodeFor(H, 0, L->getHeader()->begin()));
if (SaveInsertBB)
restoreInsertPoint(SaveInsertBB, SaveInsertPt);
+
return V;
}
projects / oota-llvm.git / blobdiff