#define LLVM_TARGET_TARGETINSTRINFO_H
#include "llvm/CodeGen/MachineBasicBlock.h"
+#include "llvm/CodeGen/MachineFunction.h"
#include "llvm/Support/DataTypes.h"
#include <vector>
#include <cassert>
class MachineInstr;
class TargetMachine;
-class Value;
-class Type;
-class Instruction;
-class Constant;
-class Function;
class MachineCodeForInstruction;
class TargetRegisterClass;
+class LiveVariables;
//---------------------------------------------------------------------------
// Data types used to define information about a single machine instruction
const unsigned M_LOAD_FLAG = 1 << 5;
const unsigned M_STORE_FLAG = 1 << 6;
-// M_2_ADDR_FLAG - 3-addr instructions which really work like 2-addr ones.
-const unsigned M_2_ADDR_FLAG = 1 << 7;
-
-// M_CONVERTIBLE_TO_3_ADDR - This is a M_2_ADDR_FLAG instruction which can be
+// M_CONVERTIBLE_TO_3_ADDR - This is a 2-address instruction which can be
// changed into a 3-address instruction if the first two operands cannot be
// assigned to the same register. The target must implement the
// TargetInstrInfo::convertToThreeAddress method for this instruction.
-const unsigned M_CONVERTIBLE_TO_3_ADDR = 1 << 8;
+const unsigned M_CONVERTIBLE_TO_3_ADDR = 1 << 7;
// This M_COMMUTABLE - is a 2- or 3-address instruction (of the form X = op Y,
// Z), which produces the same result if Y and Z are exchanged.
-const unsigned M_COMMUTABLE = 1 << 9;
+const unsigned M_COMMUTABLE = 1 << 8;
// M_TERMINATOR_FLAG - Is this instruction part of the terminator for a basic
// block? Typically this is things like return and branch instructions.
// Various passes use this to insert code into the bottom of a basic block, but
// before control flow occurs.
-const unsigned M_TERMINATOR_FLAG = 1 << 10;
+const unsigned M_TERMINATOR_FLAG = 1 << 9;
// M_USES_CUSTOM_DAG_SCHED_INSERTION - Set if this instruction requires custom
// insertion support when the DAG scheduler is inserting it into a machine basic
// block.
-const unsigned M_USES_CUSTOM_DAG_SCHED_INSERTION = 1 << 11;
+const unsigned M_USES_CUSTOM_DAG_SCHED_INSERTION = 1 << 10;
// M_VARIABLE_OPS - Set if this instruction can have a variable number of extra
// operands in addition to the minimum number operands specified.
-const unsigned M_VARIABLE_OPS = 1 << 12;
+const unsigned M_VARIABLE_OPS = 1 << 11;
+
+// M_PREDICABLE - Set if this instruction has a predicate operand that
+// controls execution. It may be set to 'always'.
+const unsigned M_PREDICABLE = 1 << 12;
+
+// M_REMATERIALIZIBLE - Set if this instruction can be trivally re-materialized
+// at any time, e.g. constant generation, load from constant pool.
+const unsigned M_REMATERIALIZIBLE = 1 << 13;
+
// Machine operand flags
// M_LOOK_UP_PTR_REG_CLASS - Set if this operand is a pointer value and it
// requires a callback to look up its register class.
const unsigned M_LOOK_UP_PTR_REG_CLASS = 1 << 0;
+/// M_PREDICATE_OPERAND - Set if this is one of the operands that made up of the
+/// predicate operand that controls an M_PREDICATED instruction.
+const unsigned M_PREDICATE_OPERAND = 1 << 1;
+
+namespace TOI {
+ // Operand constraints: only "tied_to" for now.
+ enum OperandConstraint {
+ TIED_TO = 0 // Must be allocated the same register as.
+ };
+}
+
/// TargetOperandInfo - This holds information about one operand of a machine
/// instruction, indicating the register class for register operands, etc.
///
class TargetInstrDescriptor {
public:
+ MachineOpCode Opcode; // The opcode.
+ unsigned short numOperands; // Num of args (may be more if variable_ops).
const char * Name; // Assembly language mnemonic for the opcode.
- unsigned numOperands; // Num of args (may be more if variable_ops).
InstrSchedClass schedClass; // enum identifying instr sched class
unsigned Flags; // flags identifying machine instr class
unsigned TSFlags; // Target Specific Flag values
const unsigned *ImplicitUses; // Registers implicitly read by this instr
const unsigned *ImplicitDefs; // Registers implicitly defined by this instr
const TargetOperandInfo *OpInfo; // 'numOperands' entries about operands.
+
+ /// getOperandConstraint - Returns the value of the specific constraint if
+ /// it is set. Returns -1 if it is not set.
+ int getOperandConstraint(unsigned OpNum,
+ TOI::OperandConstraint Constraint) const {
+ assert((OpNum < numOperands || (Flags & M_VARIABLE_OPS)) &&
+ "Invalid operand # of TargetInstrInfo");
+ if (OpNum < numOperands &&
+ (OpInfo[OpNum].Constraints & (1 << Constraint))) {
+ unsigned Pos = 16 + Constraint * 4;
+ return (int)(OpInfo[OpNum].Constraints >> Pos) & 0xf;
+ }
+ return -1;
+ }
+
+ /// findTiedToSrcOperand - Returns the operand that is tied to the specified
+ /// dest operand. Returns -1 if there isn't one.
+ int findTiedToSrcOperand(unsigned OpNum) const;
};
// Invariant opcodes: All instruction sets have these as their low opcodes.
enum {
PHI = 0,
- INLINEASM = 1
+ INLINEASM = 1,
+ LABEL = 2
};
unsigned getNumOpcodes() const { return NumOpcodes; }
return get(Opcode).Flags & M_RET_FLAG;
}
- bool isTwoAddrInstr(MachineOpCode Opcode) const {
- return get(Opcode).Flags & M_2_ADDR_FLAG;
+ bool isPredicable(MachineOpCode Opcode) const {
+ return get(Opcode).Flags & M_PREDICABLE;
+ }
+ bool isReMaterializable(MachineOpCode Opcode) const {
+ return get(Opcode).Flags & M_REMATERIALIZIBLE;
}
bool isCommutableInstr(MachineOpCode Opcode) const {
return get(Opcode).Flags & M_COMMUTABLE;
return get(Opcode).Flags & M_VARIABLE_OPS;
}
- // Operand constraints: only "tied_to" for now.
- enum OperandConstraint {
- TIED_TO = 0 // Must be allocated the same register as.
- };
-
/// getOperandConstraint - Returns the value of the specific constraint if
/// it is set. Returns -1 if it is not set.
int getOperandConstraint(MachineOpCode Opcode, unsigned OpNum,
- OperandConstraint Constraint) {
- assert(OpNum < get(Opcode).numOperands &&
- "Invalid operand # of TargetInstrInfo");
- if (get(Opcode).OpInfo[OpNum].Constraints & (1 << Constraint)) {
- unsigned Pos = 16 + Constraint * 4;
- return (int)(get(Opcode).OpInfo[OpNum].Constraints >> Pos) & 0xf;
- }
- return -1;
+ TOI::OperandConstraint Constraint) const {
+ return get(Opcode).getOperandConstraint(OpNum, Constraint);
}
- /// getDWARF_LABELOpcode - Return the opcode of the target's DWARF_LABEL
- /// instruction if it has one. This is used by codegen passes that update
- /// DWARF line number info as they modify the code.
- virtual unsigned getDWARF_LABELOpcode() const {
- return 0;
- }
-
/// Return true if the instruction is a register to register move
/// and leave the source and dest operands in the passed parameters.
virtual bool isMoveInstr(const MachineInstr& MI,
/// convertToThreeAddress - This method must be implemented by targets that
/// set the M_CONVERTIBLE_TO_3_ADDR flag. When this flag is set, the target
- /// may be able to convert a two-address instruction into a true
- /// three-address instruction on demand. This allows the X86 target (for
+ /// may be able to convert a two-address instruction into one or moretrue
+ /// three-address instructions on demand. This allows the X86 target (for
/// example) to convert ADD and SHL instructions into LEA instructions if they
/// would require register copies due to two-addressness.
///
/// This method returns a null pointer if the transformation cannot be
- /// performed, otherwise it returns the new instruction.
+ /// performed, otherwise it returns the last new instruction.
///
- virtual MachineInstr *convertToThreeAddress(MachineInstr *TA) const {
+ virtual MachineInstr *
+ convertToThreeAddress(MachineFunction::iterator &MFI,
+ MachineBasicBlock::iterator &MBBI, LiveVariables &LV) const {
return 0;
}
/// just return false, leaving TBB/FBB null.
/// 2. If this block ends with only an unconditional branch, it sets TBB to be
/// the destination block.
- /// 3. If this block ends with an conditional branch, it returns the 'true'
- /// destination in TBB, the 'false' destination in FBB, and a list of
- /// operands that evaluate the condition. These operands can be passed to
- /// other TargetInstrInfo methods to create new branches.
+ /// 3. If this block ends with an conditional branch and it falls through to
+ /// an successor block, it sets TBB to be the branch destination block and a
+ /// list of operands that evaluate the condition. These
+ /// operands can be passed to other TargetInstrInfo methods to create new
+ /// branches.
+ /// 4. If this block ends with an conditional branch and an unconditional
+ /// block, it returns the 'true' destination in TBB, the 'false' destination
+ /// in FBB, and a list of operands that evaluate the condition. These
+ /// operands can be passed to other TargetInstrInfo methods to create new
+ /// branches.
///
/// Note that RemoveBranch and InsertBranch must be implemented to support
/// cases where this method returns success.
abort();
}
+ /// PredicateInstruction - Convert the instruction into a predicated
+ /// instruction. It returns true if the operation was successful.
+ virtual bool PredicateInstruction(MachineInstr *MI,
+ std::vector<MachineOperand> &Cond) const;
+
/// getPointerRegClass - Returns a TargetRegisterClass used for pointer
/// values.
virtual const TargetRegisterClass *getPointerRegClass() const {
assert(0 && "Target didn't implement getPointerRegClass!");
abort();
+ return 0; // Must return a value in order to compile with VS 2005
}
};
projects / oota-llvm.git / blobdiff