// ComposedOf - A list of two SubRegIndex instances, [A, B].
// This indicates that this SubRegIndex is the result of composing A and B.
list<SubRegIndex> ComposedOf = comps;
+
+ // CoveringSubRegIndices - A list of two or more sub-register indexes that
+ // cover this sub-register.
+ //
+ // This field should normally be left blank as TableGen can infer it.
+ //
+ // TableGen automatically detects sub-registers that straddle the registers
+ // in the SubRegs field of a Register definition. For example:
+ //
+ // Q0 = dsub_0 -> D0, dsub_1 -> D1
+ // Q1 = dsub_0 -> D2, dsub_1 -> D3
+ // D1_D2 = dsub_0 -> D1, dsub_1 -> D2
+ // QQ0 = qsub_0 -> Q0, qsub_1 -> Q1
+ //
+ // TableGen will infer that D1_D2 is a sub-register of QQ0. It will be given
+ // the synthetic index dsub_1_dsub_2 unless some SubRegIndex is defined with
+ // CoveringSubRegIndices = [dsub_1, dsub_2].
+ list<SubRegIndex> CoveringSubRegIndices = [];
}
// RegAltNameIndex - The alternate name set to use for register operands of
// register.
list<RegAltNameIndex> RegAltNameIndices = [];
- // CompositeIndices - Specify subreg indices that don't correspond directly to
- // a register in SubRegs and are not inherited. The following formats are
- // supported:
- //
- // (a) Identity - Reg:a == Reg
- // (a b) Alias - Reg:a == Reg:b
- // (a b,c) Composite - Reg:a == (Reg:b):c
- //
- // This can be used to disambiguate a sub-sub-register that exists in more
- // than one subregister and other weird stuff.
- list<dag> CompositeIndices = [];
-
// DwarfNumbers - Numbers used internally by gcc/gdb to identify the register.
// These values can be determined by locating the <target>.h file in the
// directory llvmgcc/gcc/config/<target>/ and looking for REGISTER_NAMES. The
// SubRegIndices - N SubRegIndex instances. This provides the names of the
// sub-registers in the synthesized super-registers.
list<SubRegIndex> SubRegIndices = Indices;
-
- // Compose sub-register indices like in a normal Register.
- list<dag> CompositeIndices = [];
}
bit isCompare = 0; // Is this instruction a comparison instruction?
bit isMoveImm = 0; // Is this instruction a move immediate instruction?
bit isBitcast = 0; // Is this instruction a bitcast instruction?
+ bit isSelect = 0; // Is this instruction a select instruction?
bit isBarrier = 0; // Can control flow fall through this instruction?
bit isCall = 0; // Is this instruction a call instruction?
bit canFoldAsLoad = 0; // Can this be folded as a simple memory operand?
- bit mayLoad = 0; // Is it possible for this inst to read memory?
- bit mayStore = 0; // Is it possible for this inst to write memory?
+ bit mayLoad = ?; // Is it possible for this inst to read memory?
+ bit mayStore = ?; // Is it possible for this inst to write memory?
bit isConvertibleToThreeAddress = 0; // Can this 2-addr instruction promote?
bit isCommutable = 0; // Is this 3 operand instruction commutable?
bit isTerminator = 0; // Is this part of the terminator for a basic block?
//
// neverHasSideEffects - Set on an instruction with no pattern if it has no
// side effects.
- bit hasSideEffects = 0;
+ bit hasSideEffects = ?;
bit neverHasSideEffects = 0;
// Is this instruction a "real" instruction (with a distinct machine
/// unknown definition - Mark this operand as being of unknown type, causing
/// it to be resolved by inference in the context it is used.
-def unknown;
+class unknown_class;
+def unknown : unknown_class;
/// AsmOperandClass - Representation for the kinds of operands which the target
/// specific parser can create and the assembly matcher may need to distinguish.
AsmOperandClass ParserMatchClass = ImmAsmOperand;
}
-class RegisterOperand<RegisterClass regclass, string pm = "printOperand"> {
+class RegisterOperand<RegisterClass regclass, string pm = "printOperand">
+ : DAGOperand {
// RegClass - The register class of the operand.
RegisterClass RegClass = regclass;
// PrintMethod - The target method to call to print register operands of
///
def zero_reg;
+/// OperandWithDefaultOps - This Operand class can be used as the parent class
+/// for an Operand that needs to be initialized with a default value if
+/// no value is supplied in a pattern. This class can be used to simplify the
+/// pattern definitions for instructions that have target specific flags
+/// encoded as immediate operands.
+class OperandWithDefaultOps<ValueType ty, dag defaultops>
+ : Operand<ty> {
+ dag DefaultOps = defaultops;
+}
+
/// PredicateOperand - This can be used to define a predicate operand for an
/// instruction. OpTypes specifies the MIOperandInfo for the operand, and
/// AlwaysVal specifies the value of this predicate when set to "always
/// execute".
class PredicateOperand<ValueType ty, dag OpTypes, dag AlwaysVal>
- : Operand<ty> {
+ : OperandWithDefaultOps<ty, AlwaysVal> {
let MIOperandInfo = OpTypes;
- dag DefaultOps = AlwaysVal;
}
/// OptionalDefOperand - This is used to define a optional definition operand
/// for an instruction. DefaultOps is the register the operand represents if
/// none is supplied, e.g. zero_reg.
class OptionalDefOperand<ValueType ty, dag OpTypes, dag defaultops>
- : Operand<ty> {
+ : OperandWithDefaultOps<ty, defaultops> {
let MIOperandInfo = OpTypes;
- dag DefaultOps = defaultops;
}
// Sparc manual specifies its instructions in the format [31..0] (big), while
// PowerPC specifies them using the format [0..31] (little).
bit isLittleEndianEncoding = 0;
+
+ // The instruction properties mayLoad, mayStore, and hasSideEffects are unset
+ // by default, and TableGen will infer their value from the instruction
+ // pattern when possible.
+ //
+ // Normally, TableGen will issue an error it it can't infer the value of a
+ // property that hasn't been set explicitly. When guessInstructionProperties
+ // is set, it will guess a safe value instead.
+ //
+ // This option is a temporary migration help. It will go away.
+ bit guessInstructionProperties = 1;
}
// Standard Pseudo Instructions.
let InOperandList = (ins variable_ops);
let AsmString = "BUNDLE";
}
+def LIFETIME_START : Instruction {
+ let OutOperandList = (outs);
+ let InOperandList = (ins i32imm:$id);
+ let AsmString = "LIFETIME_START";
+ let neverHasSideEffects = 1;
+}
+def LIFETIME_END : Instruction {
+ let OutOperandList = (outs);
+ let InOperandList = (ins i32imm:$id);
+ let AsmString = "LIFETIME_END";
+ let neverHasSideEffects = 1;
+}
}
//===----------------------------------------------------------------------===//
// function of the AsmParser class to call on every matched instruction.
// This can be used to perform target specific instruction post-processing.
string AsmParserInstCleanup = "";
+
+ //ShouldEmitMatchRegisterName - Set to false if the target needs a hand
+ //written register name matcher
+ bit ShouldEmitMatchRegisterName = 1;
}
def DefaultAsmParser : AsmParser;
//
string Name = n;
+ // SchedModel - The machine model for scheduling and instruction cost.
+ //
+ SchedMachineModel SchedModel = NoSchedModel;
+
// ProcItin - The scheduling information for the target processor.
//
ProcessorItineraries ProcItin = pi;
list<SubtargetFeature> Features = f;
}
+// ProcessorModel allows subtargets to specify the more general
+// SchedMachineModel instead if a ProcessorItinerary. Subtargets will
+// gradually move to this newer form.
+//
+// Although this class always passes NoItineraries to the Processor
+// class, the SchedMachineModel may still define valid Itineraries.
+class ProcessorModel<string n, SchedMachineModel m, list<SubtargetFeature> f>
+ : Processor<n, NoItineraries, f> {
+ let SchedModel = m;
+}
+
+//===----------------------------------------------------------------------===//
+// InstrMapping - This class is used to create mapping tables to relate
+// instructions with each other based on the values specified in RowFields,
+// ColFields, KeyCol and ValueCols.
+//
+class InstrMapping {
+ // FilterClass - Used to limit search space only to the instructions that
+ // define the relationship modeled by this InstrMapping record.
+ string FilterClass;
+
+ // RowFields - List of fields/attributes that should be same for all the
+ // instructions in a row of the relation table. Think of this as a set of
+ // properties shared by all the instructions related by this relationship
+ // model and is used to categorize instructions into subgroups. For instance,
+ // if we want to define a relation that maps 'Add' instruction to its
+ // predicated forms, we can define RowFields like this:
+ //
+ // let RowFields = BaseOp
+ // All add instruction predicated/non-predicated will have to set their BaseOp
+ // to the same value.
+ //
+ // def Add: { let BaseOp = 'ADD'; let predSense = 'nopred' }
+ // def Add_predtrue: { let BaseOp = 'ADD'; let predSense = 'true' }
+ // def Add_predfalse: { let BaseOp = 'ADD'; let predSense = 'false' }
+ list<string> RowFields = [];
+
+ // List of fields/attributes that are same for all the instructions
+ // in a column of the relation table.
+ // Ex: let ColFields = 'predSense' -- It means that the columns are arranged
+ // based on the 'predSense' values. All the instruction in a specific
+ // column have the same value and it is fixed for the column according
+ // to the values set in 'ValueCols'.
+ list<string> ColFields = [];
+
+ // Values for the fields/attributes listed in 'ColFields'.
+ // Ex: let KeyCol = 'nopred' -- It means that the key instruction (instruction
+ // that models this relation) should be non-predicated.
+ // In the example above, 'Add' is the key instruction.
+ list<string> KeyCol = [];
+
+ // List of values for the fields/attributes listed in 'ColFields', one for
+ // each column in the relation table.
+ //
+ // Ex: let ValueCols = [['true'],['false']] -- It adds two columns in the
+ // table. First column requires all the instructions to have predSense
+ // set to 'true' and second column requires it to be 'false'.
+ list<list<string> > ValueCols = [];
+}
+
//===----------------------------------------------------------------------===//
// Pull in the common support for calling conventions.
//