}
; Named metadata
- !0 = metadata !{i32 42, null, metadata !"string"}
+ !0 = !{i32 42, null, !"string"}
!foo = !{!0}
This example is made up of a :ref:`global variable <globalvars>` named
attributes <paramattrs>`), optional :ref:`function attributes <fnattrs>`,
an optional section, an optional alignment,
an optional :ref:`comdat <langref_comdats>`,
-an optional :ref:`garbage collector name <gc>`, an optional :ref:`prefix <prefixdata>`, an opening
+an optional :ref:`garbage collector name <gc>`, an optional :ref:`prefix <prefixdata>`,
+an optional :ref:`prologue <prologuedata>`, an opening
curly brace, a list of basic blocks, and a closing curly brace.
LLVM function declarations consist of the "``declare``" keyword, an
an optional ``unnamed_addr`` attribute, a return type, an optional
:ref:`parameter attribute <paramattrs>` for the return type, a function
name, a possibly empty list of arguments, an optional alignment, an optional
-:ref:`garbage collector name <gc>` and an optional :ref:`prefix <prefixdata>`.
+:ref:`garbage collector name <gc>`, an optional :ref:`prefix <prefixdata>`,
+and an optional :ref:`prologue <prologuedata>`.
A function definition contains a list of basic blocks, forming the CFG (Control
Flow Graph) for the function. Each basic block may optionally start with a label
[cconv] [ret attrs]
<ResultType> @<FunctionName> ([argument list])
[unnamed_addr] [fn Attrs] [section "name"] [comdat $<ComdatName>]
- [align N] [gc] [prefix Constant] { ... }
+ [align N] [gc] [prefix Constant] [prologue Constant] { ... }
The argument list is a comma seperated sequence of arguments where each
argument is of the following form
``IMAGE_COMDAT_SELECT_LARGEST`` containing the contents of the ``@foo`` symbol
and another COMDAT section with selection kind
``IMAGE_COMDAT_SELECT_ASSOCIATIVE`` which is associated with the first COMDAT
-section and contains the contents of the ``@baz`` symbol.
+section and contains the contents of the ``@bar`` symbol.
There are some restrictions on the properties of the global object.
It, or an alias to it, must have the same name as the COMDAT group when
Syntax::
; Some unnamed metadata nodes, which are referenced by the named metadata.
- !0 = metadata !{metadata !"zero"}
- !1 = metadata !{metadata !"one"}
- !2 = metadata !{metadata !"two"}
+ !0 = !{!"zero"}
+ !1 = !{!"one"}
+ !2 = !{!"two"}
; A named metadata.
!name = !{!0, !1, !2}
.. _noalias:
``noalias``
- This indicates that pointer values :ref:`based <pointeraliasing>` on
- the argument or return value do not alias pointer values that are
- not *based* on it, ignoring certain "irrelevant" dependencies. For a
- call to the parent function, dependencies between memory references
- from before or after the call and from those during the call are
- "irrelevant" to the ``noalias`` keyword for the arguments and return
- value used in that call. The caller shares the responsibility with
- the callee for ensuring that these requirements are met. For further
- details, please see the discussion of the NoAlias response in :ref:`alias
- analysis <Must, May, or No>`.
+ This indicates that objects accessed via pointer values
+ :ref:`based <pointeraliasing>` on the argument or return value are not also
+ accessed, during the execution of the function, via pointer values not
+ *based* on the argument or return value. The attribute on a return value
+ also has additional semantics described below. The caller shares the
+ responsibility with the callee for ensuring that these requirements are met.
+ For further details, please see the discussion of the NoAlias response in
+ :ref:`alias analysis <Must, May, or No>`.
Note that this definition of ``noalias`` is intentionally similar
- to the definition of ``restrict`` in C99 for function arguments,
- though it is slightly weaker.
+ to the definition of ``restrict`` in C99 for function arguments.
For function return values, C99's ``restrict`` is not meaningful,
- while LLVM's ``noalias`` is.
+ while LLVM's ``noalias`` is. Furthermore, the semantics of the ``noalias``
+ attribute on return values are stronger than the semantics of the attribute
+ when used on function arguments. On function return values, the ``noalias``
+ attribute indicates that the function acts like a system memory allocation
+ function, returning a pointer to allocated storage disjoint from the
+ storage for any other object accessible to the caller.
+
``nocapture``
This indicates that the callee does not make any copies of the
pointer that outlive the callee itself. This is not a valid
Prefix Data
-----------
-Prefix data is data associated with a function which the code generator
-will emit immediately before the function body. The purpose of this feature
-is to allow frontends to associate language-specific runtime metadata with
-specific functions and make it available through the function pointer while
-still allowing the function pointer to be called. To access the data for a
-given function, a program may bitcast the function pointer to a pointer to
-the constant's type. This implies that the IR symbol points to the start
-of the prefix data.
+Prefix data is data associated with a function which the code
+generator will emit immediately before the function's entrypoint.
+The purpose of this feature is to allow frontends to associate
+language-specific runtime metadata with specific functions and make it
+available through the function pointer while still allowing the
+function pointer to be called.
+
+To access the data for a given function, a program may bitcast the
+function pointer to a pointer to the constant's type and dereference
+index -1. This implies that the IR symbol points just past the end of
+the prefix data. For instance, take the example of a function annotated
+with a single ``i32``,
+
+.. code-block:: llvm
+
+ define void @f() prefix i32 123 { ... }
+
+The prefix data can be referenced as,
+
+.. code-block:: llvm
+
+ %0 = bitcast *void () @f to *i32
+ %a = getelementptr inbounds *i32 %0, i32 -1
+ %b = load i32* %a
+
+Prefix data is laid out as if it were an initializer for a global variable
+of the prefix data's type. The function will be placed such that the
+beginning of the prefix data is aligned. This means that if the size
+of the prefix data is not a multiple of the alignment size, the
+function's entrypoint will not be aligned. If alignment of the
+function's entrypoint is desired, padding must be added to the prefix
+data.
+
+A function may have prefix data but no body. This has similar semantics
+to the ``available_externally`` linkage in that the data may be used by the
+optimizers but will not be emitted in the object file.
+
+.. _prologuedata:
+
+Prologue Data
+-------------
-To maintain the semantics of ordinary function calls, the prefix data must
+The ``prologue`` attribute allows arbitrary code (encoded as bytes) to
+be inserted prior to the function body. This can be used for enabling
+function hot-patching and instrumentation.
+
+To maintain the semantics of ordinary function calls, the prologue data must
have a particular format. Specifically, it must begin with a sequence of
bytes which decode to a sequence of machine instructions, valid for the
module's target, which transfer control to the point immediately succeeding
-the prefix data, without performing any other visible action. This allows
+the prologue data, without performing any other visible action. This allows
the inliner and other passes to reason about the semantics of the function
-definition without needing to reason about the prefix data. Obviously this
-makes the format of the prefix data highly target dependent.
-
-Prefix data is laid out as if it were an initializer for a global variable
-of the prefix data's type. No padding is automatically placed between the
-prefix data and the function body. If padding is required, it must be part
-of the prefix data.
+definition without needing to reason about the prologue data. Obviously this
+makes the format of the prologue data highly target dependent.
-A trivial example of valid prefix data for the x86 architecture is ``i8 144``,
+A trivial example of valid prologue data for the x86 architecture is ``i8 144``,
which encodes the ``nop`` instruction:
.. code-block:: llvm
- define void @f() prefix i8 144 { ... }
+ define void @f() prologue i8 144 { ... }
-Generally prefix data can be formed by encoding a relative branch instruction
-which skips the metadata, as in this example of valid prefix data for the
+Generally prologue data can be formed by encoding a relative branch instruction
+which skips the metadata, as in this example of valid prologue data for the
x86_64 architecture, where the first two bytes encode ``jmp .+10``:
.. code-block:: llvm
%0 = type <{ i8, i8, i8* }>
- define void @f() prefix %0 <{ i8 235, i8 8, i8* @md}> { ... }
+ define void @f() prologue %0 <{ i8 235, i8 8, i8* @md}> { ... }
-A function may have prefix data but no body. This has similar semantics
+A function may have prologue data but no body. This has similar semantics
to the ``available_externally`` linkage in that the data may be used by the
optimizers but will not be emitted in the object file.
square brackets (``[]``)). For example:
"``[ i32 42, i32 11, i32 74 ]``". Array constants must have
:ref:`array type <t_array>`, and the number and types of elements must
- match those specified by the type.
+ match those specified by the type. As a special case, character array
+ constants may also be represented as a double-quoted string using the ``c``
+ prefix. For example: "``c"Hello World\0A\00"``".
**Vector constants**
Vector constants are represented with notation similar to vector
type definitions (a comma separated list of elements, surrounded by
having to print large zero initializers (e.g. for large arrays) and
is always exactly equivalent to using explicit zero initializers.
**Metadata node**
- A metadata node is a structure-like constant with :ref:`metadata
- type <t_metadata>`. For example:
- "``metadata !{ i32 0, metadata !"test" }``". Unlike other
- constants that are meant to be interpreted as part of the
- instruction stream, metadata is a place to attach additional
+ A metadata node is a constant tuple without types. For example:
+ "``!{!0, !{!2, !0}, !"test"}``". Metadata can reference constant values,
+ for example: "``!{!0, i32 0, i8* @global, i64 (i64)* @function, !"str"}``".
+ Unlike other typed constants that are meant to be interpreted as part of
+ the instruction stream, metadata is a place to attach additional
information such as debug info.
Global Variable and Function Addresses
%C = xor %B, %B
%D = undef
- %E = icmp lt %D, 4
+ %E = icmp slt %D, 4
%F = icmp gte %D, 4
Safe:
.. _metadata:
-Metadata Nodes and Metadata Strings
------------------------------------
+Metadata
+========
LLVM IR allows metadata to be attached to instructions in the program
that can convey extra information about the code to the optimizers and
code generator. One example application of metadata is source-level
debug information. There are two metadata primitives: strings and nodes.
-All metadata has the ``metadata`` type and is identified in syntax by a
-preceding exclamation point ('``!``').
+
+Metadata does not have a type, and is not a value. If referenced from a
+``call`` instruction, it uses the ``metadata`` type.
+
+All metadata are identified in syntax by a exclamation point ('``!``').
+
+Metadata Nodes and Metadata Strings
+-----------------------------------
A metadata string is a string surrounded by double quotes. It can
contain any character by escaping non-printable characters with
.. code-block:: llvm
- !{ metadata !"test\00", i32 10}
+ !{ !"test\00", i32 10}
A :ref:`named metadata <namedmetadatastructure>` is a collection of
metadata nodes, which can be looked up in the module symbol table. For
.. code-block:: llvm
- !foo = metadata !{!4, !3}
+ !foo = !{!4, !3}
Metadata can be used as function arguments. Here ``llvm.dbg.value``
function is using two metadata arguments:
.. code-block:: llvm
- !0 = metadata !{ metadata !"an example type tree" }
- !1 = metadata !{ metadata !"int", metadata !0 }
- !2 = metadata !{ metadata !"float", metadata !0 }
- !3 = metadata !{ metadata !"const float", metadata !2, i64 1 }
+ !0 = !{ !"an example type tree" }
+ !1 = !{ !"int", !0 }
+ !2 = !{ !"float", !0 }
+ !3 = !{ !"const float", !2, i64 1 }
The first field is an identity field. It can be any value, usually a
metadata string, which uniquely identifies the type. The most important
.. code-block:: llvm
- !4 = metadata !{ i64 0, i64 4, metadata !1, i64 8, i64 4, metadata !2 }
+ !4 = !{ i64 0, i64 4, !1, i64 8, i64 4, !2 }
This describes a struct with two fields. The first is at offset 0 bytes
with size 4 bytes, and has tbaa tag !1. The second is at offset 8 bytes
.. code-block:: llvm
; Two scope domains:
- !0 = metadata !{metadata !0}
- !1 = metadata !{metadata !1}
+ !0 = !{!0}
+ !1 = !{!1}
; Some scopes in these domains:
- !2 = metadata !{metadata !2, metadata !0}
- !3 = metadata !{metadata !3, metadata !0}
- !4 = metadata !{metadata !4, metadata !1}
+ !2 = !{!2, !0}
+ !3 = !{!3, !0}
+ !4 = !{!4, !1}
; Some scope lists:
- !5 = metadata !{metadata !4} ; A list containing only scope !4
- !6 = metadata !{metadata !4, metadata !3, metadata !2}
- !7 = metadata !{metadata !3}
+ !5 = !{!4} ; A list containing only scope !4
+ !6 = !{!4, !3, !2}
+ !7 = !{!3}
; These two instructions don't alias:
%0 = load float* %c, align 4, !alias.scope !5
.. code-block:: llvm
- !0 = metadata !{ float 2.5 } ; maximum acceptable inaccuracy is 2.5 ULPs
+ !0 = !{ float 2.5 } ; maximum acceptable inaccuracy is 2.5 ULPs
'``range``' Metadata
^^^^^^^^^^^^^^^^^^^^
%d = invoke i8 @bar() to label %cont
unwind label %lpad, !range !3 ; Can only be -2, -1, 3, 4 or 5
...
- !0 = metadata !{ i8 0, i8 2 }
- !1 = metadata !{ i8 255, i8 2 }
- !2 = metadata !{ i8 0, i8 2, i8 3, i8 6 }
- !3 = metadata !{ i8 -2, i8 0, i8 3, i8 6 }
+ !0 = !{ i8 0, i8 2 }
+ !1 = !{ i8 255, i8 2 }
+ !2 = !{ i8 0, i8 2, i8 3, i8 6 }
+ !3 = !{ i8 -2, i8 0, i8 3, i8 6 }
'``llvm.loop``'
^^^^^^^^^^^^^^^
.. code-block:: llvm
- !0 = metadata !{ metadata !0 }
- !1 = metadata !{ metadata !1 }
+ !0 = !{!0}
+ !1 = !{!1}
The loop identifier metadata can be used to specify additional
per-loop metadata. Any operands after the first operand can be treated
br i1 %exitcond, label %._crit_edge, label %.lr.ph, !llvm.loop !0
...
- !0 = metadata !{ metadata !0, metadata !1 }
- !1 = metadata !{ metadata !"llvm.loop.unroll.count", i32 4 }
+ !0 = !{!0, !1}
+ !1 = !{!"llvm.loop.unroll.count", i32 4}
'``llvm.loop.vectorize``' and '``llvm.loop.interleave``'
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. code-block:: llvm
- !0 = metadata !{ metadata !"llvm.loop.interleave.count", i32 4 }
+ !0 = !{!"llvm.loop.interleave.count", i32 4}
Note that setting ``llvm.loop.interleave.count`` to 1 disables interleaving
multiple iterations of the loop. If ``llvm.loop.interleave.count`` is set to 0
.. code-block:: llvm
- !0 = metadata !{ metadata !"llvm.loop.vectorize.enable", i1 0 }
- !1 = metadata !{ metadata !"llvm.loop.vectorize.enable", i1 1 }
+ !0 = !{!"llvm.loop.vectorize.enable", i1 0}
+ !1 = !{!"llvm.loop.vectorize.enable", i1 1}
'``llvm.loop.vectorize.width``' Metadata
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. code-block:: llvm
- !0 = metadata !{ metadata !"llvm.loop.vectorize.width", i32 4 }
+ !0 = !{!"llvm.loop.vectorize.width", i32 4}
Note that setting ``llvm.loop.vectorize.width`` to 1 disables
vectorization of the loop. If ``llvm.loop.vectorize.width`` is set to
.. code-block:: llvm
- !0 = metadata !{ metadata !"llvm.loop.unroll.count", i32 4 }
+ !0 = !{!"llvm.loop.unroll.count", i32 4}
If the trip count of the loop is less than the unroll count the loop
will be partially unrolled.
.. code-block:: llvm
- !0 = metadata !{ metadata !"llvm.loop.unroll.disable" }
+ !0 = !{!"llvm.loop.unroll.disable"}
'``llvm.loop.unroll.full``' Metadata
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. code-block:: llvm
- !0 = metadata !{ metadata !"llvm.loop.unroll.full" }
+ !0 = !{!"llvm.loop.unroll.full"}
'``llvm.mem``'
^^^^^^^^^^^^^^^
for.end:
...
- !0 = metadata !{ metadata !0 }
+ !0 = !{!0}
It is also possible to have nested parallel loops. In that case the
memory accesses refer to a list of loop identifier metadata nodes instead of
outer.for.end: ; preds = %for.body
...
- !0 = metadata !{ metadata !1, metadata !2 } ; a list of loop identifiers
- !1 = metadata !{ metadata !1 } ; an identifier for the inner loop
- !2 = metadata !{ metadata !2 } ; an identifier for the outer loop
+ !0 = !{!1, !2} ; a list of loop identifiers
+ !1 = !{!1} ; an identifier for the inner loop
+ !2 = !{!2} ; an identifier for the outer loop
Module Flags Metadata
=====================
.. code-block:: llvm
- !0 = metadata !{ i32 1, metadata !"foo", i32 1 }
- !1 = metadata !{ i32 4, metadata !"bar", i32 37 }
- !2 = metadata !{ i32 2, metadata !"qux", i32 42 }
- !3 = metadata !{ i32 3, metadata !"qux",
- metadata !{
- metadata !"foo", i32 1
+ !0 = !{ i32 1, !"foo", i32 1 }
+ !1 = !{ i32 4, !"bar", i32 37 }
+ !2 = !{ i32 2, !"qux", i32 42 }
+ !3 = !{ i32 3, !"qux",
+ !{
+ !"foo", i32 1
}
}
!llvm.module.flags = !{ !0, !1, !2, !3 }
::
- metadata !{ metadata !"foo", i32 1 }
+ !{ !"foo", i32 1 }
The behavior is to emit an error if the ``llvm.module.flags`` does not
contain a flag with the ID ``!"foo"`` that has the value '1' after linking is
linker options, presumably to link against ``libz`` and the ``Cocoa``
framework::
- !0 = metadata !{ i32 6, metadata !"Linker Options",
- metadata !{
- metadata !{ metadata !"-lz" },
- metadata !{ metadata !"-framework", metadata !"Cocoa" } } }
+ !0 = !{ i32 6, !"Linker Options",
+ !{
+ !{ !"-lz" },
+ !{ !"-framework", !"Cocoa" } } }
!llvm.module.flags = !{ !0 }
The metadata encoding as lists of lists of options, as opposed to a collapsed
enum is the smallest type which can represent all of its values::
!llvm.module.flags = !{!0, !1}
- !0 = metadata !{i32 1, metadata !"short_wchar", i32 1}
- !1 = metadata !{i32 1, metadata !"short_enum", i32 0}
+ !0 = !{i32 1, !"short_wchar", i32 1}
+ !1 = !{i32 1, !"short_enum", i32 0}
.. _intrinsicglobalvariables:
%agg1 = insertvalue {i32, float} undef, i32 1, 0 ; yields {i32 1, float undef}
%agg2 = insertvalue {i32, float} %agg1, float %val, 1 ; yields {i32 1, float %val}
- %agg3 = insertvalue {i32, {float}} %agg1, float %val, 1, 0 ; yields {i32 1, float %val}
+ %agg3 = insertvalue {i32, {float}} undef, float %val, 1, 0 ; yields {i32 undef, {float %val}}
.. _memoryops:
::
- <result> = load [volatile] <ty>* <pointer>[, align <alignment>][, !nontemporal !<index>][, !invariant.load !<index>]
+ <result> = load [volatile] <ty>* <pointer>[, align <alignment>][, !nontemporal !<index>][, !invariant.load !<index>][, !nonnull !<index>]
<result> = load atomic [volatile] <ty>* <pointer> [singlethread] <ordering>, align <alignment>
!<index> = !{ i32 1 }
The optional ``!invariant.load`` metadata must reference a single
metadata name ``<index>`` corresponding to a metadata node with no
entries. The existence of the ``!invariant.load`` metadata on the
-instruction tells the optimizer and code generator that this load
-address points to memory which does not change value during program
-execution. The optimizer may then move this load around, for example, by
-hoisting it out of loops using loop invariant code motion.
+instruction tells the optimizer and code generator that the address
+operand to this load points to memory which can be assumed unchanged.
+Being invariant does not imply that a location is dereferenceable,
+but it does imply that once the location is known dereferenceable
+its value is henceforth unchanging.
+
+The optional ``!nonnull`` metadata must reference a single
+metadata name ``<index>`` corresponding to a metadata node with no
+entries. The existence of the ``!nonnull`` metadata on the
+instruction tells the optimizer that the value loaded is known to
+never be null. This is analogous to the ''nonnull'' attribute
+on parameters and return values. This metadata can only be applied
+to loads of a pointer type.
Semantics:
""""""""""
- The calling conventions of the caller and callee must match.
- All ABI-impacting function attributes, such as sret, byval, inreg,
returned, and inalloca, must match.
+ - The callee must be varargs iff the caller is varargs. Bitcasting a
+ non-varargs function to the appropriate varargs type is legal so
+ long as the non-varargs prefixes obey the other rules.
Tail call optimization for calls marked ``tail`` is guaranteed to occur if
the following conditions are met:
.. code-block:: llvm
+ ; This struct is different for every platform. For most platforms,
+ ; it is merely an i8*.
+ %struct.va_list = type { i8* }
+
+ ; For Unix x86_64 platforms, va_list is the following struct:
+ ; %struct.va_list = type { i32, i32, i8*, i8* }
+
define i32 @test(i32 %X, ...) {
; Initialize variable argument processing
- %ap = alloca i8*
- %ap2 = bitcast i8** %ap to i8*
+ %ap = alloca %struct.va_list
+ %ap2 = bitcast %struct.va_list* %ap to i8*
call void @llvm.va_start(i8* %ap2)
; Read a single integer argument
- %tmp = va_arg i8** %ap, i32
+ %tmp = va_arg i8* %ap2, i32
; Demonstrate usage of llvm.va_copy and llvm.va_end
%aq = alloca i8*
declare i64 @llvm.read_register.i64(metadata)
declare void @llvm.write_register.i32(metadata, i32 @value)
declare void @llvm.write_register.i64(metadata, i64 @value)
- !0 = metadata !{metadata !"sp\00"}
+ !0 = !{!"sp\00"}
Overview:
"""""""""
This instrinsic does *not* empty the instruction pipeline. Modifications
of the current function are outside the scope of the intrinsic.
+'``llvm.instrprof_increment``' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+::
+
+ declare void @llvm.instrprof_increment(i8* <name>, i64 <hash>,
+ i32 <num-counters>, i32 <index>)
+
+Overview:
+"""""""""
+
+The '``llvm.instrprof_increment``' intrinsic can be emitted by a
+frontend for use with instrumentation based profiling. These will be
+lowered by the ``-instrprof`` pass to generate execution counts of a
+program at runtime.
+
+Arguments:
+""""""""""
+
+The first argument is a pointer to a global variable containing the
+name of the entity being instrumented. This should generally be the
+(mangled) function name for a set of counters.
+
+The second argument is a hash value that can be used by the consumer
+of the profile data to detect changes to the instrumented source, and
+the third is the number of counters associated with ``name``. It is an
+error if ``hash`` or ``num-counters`` differ between two instances of
+``instrprof_increment`` that refer to the same name.
+
+The last argument refers to which of the counters for ``name`` should
+be incremented. It should be a value between 0 and ``num-counters``.
+
+Semantics:
+""""""""""
+
+This intrinsic represents an increment of a profiling counter. It will
+cause the ``-instrprof`` pass to generate the appropriate data
+structures and the code to increment the appropriate value, in a
+format that can be written out by a compiler runtime and consumed via
+the ``llvm-profdata`` tool.
+
Standard C Library Intrinsics
-----------------------------
declare float @llvm.fabs.f32(float %Val)
declare double @llvm.fabs.f64(double %Val)
- declare x86_fp80 @llvm.fabs.f80(x86_fp80 %Val)
+ declare x86_fp80 @llvm.fabs.f80(x86_fp80 %Val)
declare fp128 @llvm.fabs.f128(fp128 %Val)
- declare ppc_fp128 @llvm.fabs.ppcf128(ppc_fp128 %Val)
+ declare ppc_fp128 @llvm.fabs.ppcf128(ppc_fp128 %Val)
Overview:
"""""""""
This function returns the same values as the libm ``fabs`` functions
would, and handles error conditions in the same way.
+'``llvm.minnum.*``' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+This is an overloaded intrinsic. You can use ``llvm.minnum`` on any
+floating point or vector of floating point type. Not all targets support
+all types however.
+
+::
+
+ declare float @llvm.minnum.f32(float %Val0, float %Val1)
+ declare double @llvm.minnum.f64(double %Val0, double %Val1)
+ declare x86_fp80 @llvm.minnum.f80(x86_fp80 %Val0, x86_fp80 %Val1)
+ declare fp128 @llvm.minnum.f128(fp128 %Val0, fp128 %Val1)
+ declare ppc_fp128 @llvm.minnum.ppcf128(ppc_fp128 %Val0, ppc_fp128 %Val1)
+
+Overview:
+"""""""""
+
+The '``llvm.minnum.*``' intrinsics return the minimum of the two
+arguments.
+
+
+Arguments:
+""""""""""
+
+The arguments and return value are floating point numbers of the same
+type.
+
+Semantics:
+""""""""""
+
+Follows the IEEE-754 semantics for minNum, which also match for libm's
+fmin.
+
+If either operand is a NaN, returns the other non-NaN operand. Returns
+NaN only if both operands are NaN. If the operands compare equal,
+returns a value that compares equal to both operands. This means that
+fmin(+/-0.0, +/-0.0) could return either -0.0 or 0.0.
+
+'``llvm.maxnum.*``' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+This is an overloaded intrinsic. You can use ``llvm.maxnum`` on any
+floating point or vector of floating point type. Not all targets support
+all types however.
+
+::
+
+ declare float @llvm.maxnum.f32(float %Val0, float %Val1l)
+ declare double @llvm.maxnum.f64(double %Val0, double %Val1)
+ declare x86_fp80 @llvm.maxnum.f80(x86_fp80 %Val0, x86_fp80 %Val1)
+ declare fp128 @llvm.maxnum.f128(fp128 %Val0, fp128 %Val1)
+ declare ppc_fp128 @llvm.maxnum.ppcf128(ppc_fp128 %Val0, ppc_fp128 %Val1)
+
+Overview:
+"""""""""
+
+The '``llvm.maxnum.*``' intrinsics return the maximum of the two
+arguments.
+
+
+Arguments:
+""""""""""
+
+The arguments and return value are floating point numbers of the same
+type.
+
+Semantics:
+""""""""""
+Follows the IEEE-754 semantics for maxNum, which also match for libm's
+fmax.
+
+If either operand is a NaN, returns the other non-NaN operand. Returns
+NaN only if both operands are NaN. If the operands compare equal,
+returns a value that compares equal to both operands. This means that
+fmax(+/-0.0, +/-0.0) could return either -0.0 or 0.0.
+
'``llvm.copysign.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Overview:
"""""""""
-The ``llvm.donothing`` intrinsic doesn't perform any operation. It's the
-only intrinsic that can be called with an invoke instruction.
+The ``llvm.donothing`` intrinsic doesn't perform any operation. It's one of only
+two intrinsics (besides ``llvm.experimental.patchpoint``) that can be called
+with an invoke instruction.
Arguments:
""""""""""
projects / oota-llvm.git / blobdiff