<li><a href="#i_shufflevector">'<tt>shufflevector</tt>' Instruction</a></li>
</ol>
</li>
+ <li><a href="#aggregateops">Aggregate Operations</a>
+ <ol>
+ <li><a href="#i_extractvalue">'<tt>extractvalue</tt>' Instruction</a></li>
+ <li><a href="#i_insertvalue">'<tt>insertvalue</tt>' Instruction</a></li>
+ </ol>
+ </li>
<li><a href="#memoryops">Memory Access and Addressing Operations</a>
<ol>
<li><a href="#i_malloc">'<tt>malloc</tt>' Instruction</a></li>
<ol>
<li><a href="#i_icmp">'<tt>icmp</tt>' Instruction</a></li>
<li><a href="#i_fcmp">'<tt>fcmp</tt>' Instruction</a></li>
+ <li><a href="#i_vicmp">'<tt>vicmp</tt>' Instruction</a></li>
+ <li><a href="#i_vfcmp">'<tt>vfcmp</tt>' Instruction</a></li>
<li><a href="#i_phi">'<tt>phi</tt>' Instruction</a></li>
<li><a href="#i_select">'<tt>select</tt>' Instruction</a></li>
<li><a href="#i_call">'<tt>call</tt>' Instruction</a></li>
<li><a href="#int_atomics">Atomic intrinsics</a>
<ol>
<li><a href="#int_memory_barrier"><tt>llvm.memory_barrier</tt></a></li>
- <li><a href="#int_atomic_lcs"><tt>llvm.atomic.lcs</tt></a></li>
- <li><a href="#int_atomic_las"><tt>llvm.atomic.las</tt></a></li>
+ <li><a href="#int_atomic_cmp_swap"><tt>llvm.atomic.cmp.swap</tt></a></li>
<li><a href="#int_atomic_swap"><tt>llvm.atomic.swap</tt></a></li>
+ <li><a href="#int_atomic_load_add"><tt>llvm.atomic.load.add</tt></a></li>
+ <li><a href="#int_atomic_load_sub"><tt>llvm.atomic.load.sub</tt></a></li>
+ <li><a href="#int_atomic_load_and"><tt>llvm.atomic.load.and</tt></a></li>
+ <li><a href="#int_atomic_load_nand"><tt>llvm.atomic.load.nand</tt></a></li>
+ <li><a href="#int_atomic_load_or"><tt>llvm.atomic.load.or</tt></a></li>
+ <li><a href="#int_atomic_load_xor"><tt>llvm.atomic.load.xor</tt></a></li>
+ <li><a href="#int_atomic_load_max"><tt>llvm.atomic.load.max</tt></a></li>
+ <li><a href="#int_atomic_load_min"><tt>llvm.atomic.load.min</tt></a></li>
+ <li><a href="#int_atomic_load_umax"><tt>llvm.atomic.load.umax</tt></a></li>
+ <li><a href="#int_atomic_load_umin"><tt>llvm.atomic.load.umin</tt></a></li>
</ol>
</li>
<li><a href="#int_general">General intrinsics</a>
<dl>
- <dt><tt><b><a name="linkage_internal">internal</a></b></tt> </dt>
+ <dt><tt><b><a name="linkage_internal">internal</a></b></tt>: </dt>
<dd>Global values with internal linkage are only directly accessible by
objects in the current module. In particular, linking code into a module with
allowed to be discarded.
</dd>
+ <dt><tt><b><a name="linkage_common">common</a></b></tt>: </dt>
+
+ <dd>"<tt>common</tt>" linkage is exactly the same as <tt>linkonce</tt>
+ linkage, except that unreferenced <tt>common</tt> globals may not be
+ discarded. This is used for globals that may be emitted in multiple
+ translation units, but that are not guaranteed to be emitted into every
+ translation unit that uses them. One example of this is tentative
+ definitions in C, such as "<tt>int X;</tt>" at global scope.
+ </dd>
+
<dt><tt><b><a name="linkage_weak">weak</a></b></tt>: </dt>
- <dd>"<tt>weak</tt>" linkage is exactly the same as <tt>linkonce</tt> linkage,
- except that unreferenced <tt>weak</tt> globals may not be discarded. This is
- used for globals that may be emitted in multiple translation units, but that
- are not guaranteed to be emitted into every translation unit that uses them.
- One example of this are common globals in C, such as "<tt>int X;</tt>" at
- global scope.
+ <dd>"<tt>weak</tt>" linkage is the same as <tt>common</tt> linkage, except
+ that some targets may choose to emit different assembly sequences for them
+ for target-dependent reasons. This is used for globals that are declared
+ "weak" in C source code.
</dd>
<dt><tt><b><a name="linkage_appending">appending</a></b></tt>: </dt>
(e.g. by passing things in registers). This calling convention allows the
target to use whatever tricks it wants to produce fast code for the target,
without having to conform to an externally specified ABI. Implementations of
- this convention should allow arbitrary tail call optimization to be supported.
- This calling convention does not support varargs and requires the prototype of
- all callees to exactly match the prototype of the function definition.
+ this convention should allow arbitrary
+ <a href="CodeGenerator.html#tailcallopt">tail call optimization</a> to be
+ supported. This calling convention does not support varargs and requires the
+ prototype of all callees to exactly match the prototype of the function
+ definition.
</dd>
<dt><b>"<tt>coldcc</tt>" - The cold calling convention</b>:</dt>
executing it.</dd>
<dt><tt>nest</tt></dt>
- <dd>This indicates that the parameter can be excised using the
+ <dd>This indicates that the pointer parameter can be excised using the
<a href="#int_trampoline">trampoline intrinsics</a>.</dd>
<dt><tt>readonly</tt></dt>
<dd>This function attribute indicates that the function has no side-effects
<td><a href="#t_integer">integer</a>,
<a href="#t_floating">floating point</a>,
<a href="#t_pointer">pointer</a>,
- <a href="#t_vector">vector</a>
+ <a href="#t_vector">vector</a>,
+ <a href="#t_struct">structure</a>,
+ <a href="#t_array">array</a>,
+ <a href="#t_label">label</a>.
</td>
</tr>
<tr>
<td><a href="#t_primitive">primitive</a></td>
<td><a href="#t_label">label</a>,
<a href="#t_void">void</a>,
- <a href="#t_integer">integer</a>,
<a href="#t_floating">floating point</a>.</td>
</tr>
<tr>
<p>The <a href="#t_firstclass">first class</a> types are perhaps the
most important. Values of these types are the only ones which can be
produced by instructions, passed as arguments, or used as operands to
-instructions. This means that all structures and arrays must be
-manipulated either by pointer or by component.</p>
+instructions.</p>
</div>
<!-- ======================================================================= -->
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection"> <a name="t_function">Function Type</a> </div>
<div class="doc_text">
+
<h5>Overview:</h5>
+
<p>The function type can be thought of as a function signature. It
consists of a return type and a list of formal parameter types. The
-return type of a function type is a scalar type or a void type or a struct type.
+return type of a function type is a scalar type, a void type, or a struct type.
If the return type is a struct type then all struct elements must be of first
-class types. Function types are usually used to build virtual function tables
-(which are structures of pointers to functions), for indirect function
-calls, and when defining a function.</p>
+class types, and the struct must have at least one element.</p>
<h5>Syntax:</h5>
-<pre> <returntype list> (<parameter list>)<br></pre>
+
+<pre>
+ <returntype list> (<parameter list>)
+</pre>
+
<p>...where '<tt><parameter list></tt>' is a comma-separated list of type
specifiers. Optionally, the parameter list may include a type <tt>...</tt>,
which indicates that the function takes a variable number of arguments.
href="#int_varargs">variable argument handling intrinsic</a> functions.
'<tt><returntype list></tt>' is a comma-separated list of
<a href="#t_firstclass">first class</a> type specifiers.</p>
+
<h5>Examples:</h5>
<table class="layout">
<tr class="layout">
<dt><b><tt>fcmp COND ( VAL1, VAL2 )</tt></b></dt>
<dd>Performs the <a href="#i_fcmp">fcmp operation</a> on constants.</dd>
+ <dt><b><tt>vicmp COND ( VAL1, VAL2 )</tt></b></dt>
+ <dd>Performs the <a href="#i_vicmp">vicmp operation</a> on constants.</dd>
+
+ <dt><b><tt>vfcmp COND ( VAL1, VAL2 )</tt></b></dt>
+ <dd>Performs the <a href="#i_vfcmp">vfcmp operation</a> on constants.</dd>
+
<dt><b><tt>extractelement ( VAL, IDX )</tt></b></dt>
<dd>Perform the <a href="#i_extractelement">extractelement
ret void <i>; Return from void function</i>
ret <type> <value>, <type> <value> <i>; Return two values from a non-void function </i>
</pre>
+
<h5>Overview:</h5>
+
<p>The '<tt>ret</tt>' instruction is used to return control flow (and a
value) from a function back to the caller.</p>
<p>There are two forms of the '<tt>ret</tt>' instruction: one that
-returns a value and then causes control flow, and one that just causes
+returns value(s) and then causes control flow, and one that just causes
control flow to occur.</p>
+
<h5>Arguments:</h5>
-<p>The '<tt>ret</tt>' instruction may return one or multiple values. The
-type of each return value must be a '<a href="#t_firstclass">first class</a>'
- type. Note that a function is not <a href="#wellformed">well formed</a>
-if there exists a '<tt>ret</tt>' instruction inside of the function that
-returns values that do not match the return type of the function.</p>
+
+<p>The '<tt>ret</tt>' instruction may return zero, one or multiple values.
+The type of each return value must be a '<a href="#t_firstclass">first
+class</a>' type. Note that a function is not <a href="#wellformed">well
+formed</a> if there exists a '<tt>ret</tt>' instruction inside of the
+function that returns values that do not match the return type of the
+function.</p>
+
<h5>Semantics:</h5>
+
<p>When the '<tt>ret</tt>' instruction is executed, control flow
returns back to the calling function's context. If the caller is a "<a
href="#i_call"><tt>call</tt></a>" instruction, execution continues at
return value. If the instruction returns multiple values then these
values can only be accessed through a '<a href="#i_getresult"><tt>getresult</tt>
</a>' instruction.</p>
+
<h5>Example:</h5>
-<pre> ret i32 5 <i>; Return an integer value of 5</i>
+
+<pre>
+ ret i32 5 <i>; Return an integer value of 5</i>
ret void <i>; Return from a void function</i>
ret i32 4, i8 2 <i>; Return two values 4 and 2 </i>
</pre>
<h5>Semantics:</h5>
-<p>The '<tt>unwind</tt>' intrinsic causes execution of the current function to
+<p>The '<tt>unwind</tt>' instruction causes execution of the current function to
immediately halt. The dynamic call stack is then searched for the first <a
href="#i_invoke"><tt>invoke</tt></a> instruction on the call stack. Once found,
execution continues at the "exceptional" destination block specified by the
<p>There are several different binary operators:</p>
</div>
<!-- _______________________________________________________________________ -->
-<div class="doc_subsubsection"> <a name="i_add">'<tt>add</tt>'
-Instruction</a> </div>
+<div class="doc_subsubsection">
+ <a name="i_add">'<tt>add</tt>' Instruction</a>
+</div>
+
<div class="doc_text">
+
<h5>Syntax:</h5>
-<pre> <result> = add <ty> <var1>, <var2> <i>; yields {ty}:result</i>
+
+<pre>
+ <result> = add <ty> <var1>, <var2> <i>; yields {ty}:result</i>
</pre>
+
<h5>Overview:</h5>
+
<p>The '<tt>add</tt>' instruction returns the sum of its two operands.</p>
+
<h5>Arguments:</h5>
-<p>The two arguments to the '<tt>add</tt>' instruction must be either <a
- href="#t_integer">integer</a> or <a href="#t_floating">floating point</a> values.
- This instruction can also take <a href="#t_vector">vector</a> versions of the values.
-Both arguments must have identical types.</p>
+
+<p>The two arguments to the '<tt>add</tt>' instruction must be <a
+ href="#t_integer">integer</a>, <a href="#t_floating">floating point</a>, or
+ <a href="#t_vector">vector</a> values. Both arguments must have identical
+ types.</p>
+
<h5>Semantics:</h5>
+
<p>The value produced is the integer or floating point sum of the two
operands.</p>
+
<p>If an integer sum has unsigned overflow, the result returned is the
mathematical result modulo 2<sup>n</sup>, where n is the bit width of
the result.</p>
+
<p>Because LLVM integers use a two's complement representation, this
instruction is appropriate for both signed and unsigned integers.</p>
+
<h5>Example:</h5>
-<pre> <result> = add i32 4, %var <i>; yields {i32}:result = 4 + %var</i>
+
+<pre>
+ <result> = add i32 4, %var <i>; yields {i32}:result = 4 + %var</i>
</pre>
</div>
<!-- _______________________________________________________________________ -->
-<div class="doc_subsubsection"> <a name="i_sub">'<tt>sub</tt>'
-Instruction</a> </div>
+<div class="doc_subsubsection">
+ <a name="i_sub">'<tt>sub</tt>' Instruction</a>
+</div>
+
<div class="doc_text">
+
<h5>Syntax:</h5>
-<pre> <result> = sub <ty> <var1>, <var2> <i>; yields {ty}:result</i>
+
+<pre>
+ <result> = sub <ty> <var1>, <var2> <i>; yields {ty}:result</i>
</pre>
+
<h5>Overview:</h5>
+
<p>The '<tt>sub</tt>' instruction returns the difference of its two
operands.</p>
-<p>Note that the '<tt>sub</tt>' instruction is used to represent the '<tt>neg</tt>'
-instruction present in most other intermediate representations.</p>
+
+<p>Note that the '<tt>sub</tt>' instruction is used to represent the
+'<tt>neg</tt>' instruction present in most other intermediate
+representations.</p>
+
<h5>Arguments:</h5>
-<p>The two arguments to the '<tt>sub</tt>' instruction must be either <a
- href="#t_integer">integer</a> or <a href="#t_floating">floating point</a>
-values.
-This instruction can also take <a href="#t_vector">vector</a> versions of the values.
-Both arguments must have identical types.</p>
+
+<p>The two arguments to the '<tt>sub</tt>' instruction must be <a
+ href="#t_integer">integer</a>, <a href="#t_floating">floating point</a>,
+ or <a href="#t_vector">vector</a> values. Both arguments must have identical
+ types.</p>
+
<h5>Semantics:</h5>
+
<p>The value produced is the integer or floating point difference of
the two operands.</p>
+
<p>If an integer difference has unsigned overflow, the result returned is the
mathematical result modulo 2<sup>n</sup>, where n is the bit width of
the result.</p>
+
<p>Because LLVM integers use a two's complement representation, this
instruction is appropriate for both signed and unsigned integers.</p>
+
<h5>Example:</h5>
<pre>
<result> = sub i32 4, %var <i>; yields {i32}:result = 4 - %var</i>
<result> = sub i32 0, %val <i>; yields {i32}:result = -%var</i>
</pre>
</div>
+
<!-- _______________________________________________________________________ -->
-<div class="doc_subsubsection"> <a name="i_mul">'<tt>mul</tt>'
-Instruction</a> </div>
+<div class="doc_subsubsection">
+ <a name="i_mul">'<tt>mul</tt>' Instruction</a>
+</div>
+
<div class="doc_text">
+
<h5>Syntax:</h5>
<pre> <result> = mul <ty> <var1>, <var2> <i>; yields {ty}:result</i>
</pre>
<h5>Overview:</h5>
<p>The '<tt>mul</tt>' instruction returns the product of its two
operands.</p>
+
<h5>Arguments:</h5>
-<p>The two arguments to the '<tt>mul</tt>' instruction must be either <a
- href="#t_integer">integer</a> or <a href="#t_floating">floating point</a>
-values.
-This instruction can also take <a href="#t_vector">vector</a> versions of the values.
-Both arguments must have identical types.</p>
+
+<p>The two arguments to the '<tt>mul</tt>' instruction must be <a
+href="#t_integer">integer</a>, <a href="#t_floating">floating point</a>,
+or <a href="#t_vector">vector</a> values. Both arguments must have identical
+types.</p>
+
<h5>Semantics:</h5>
+
<p>The value produced is the integer or floating point product of the
two operands.</p>
+
<p>If the result of an integer multiplication has unsigned overflow,
the result returned is the mathematical result modulo
2<sup>n</sup>, where n is the bit width of the result.</p>
<pre> <result> = mul i32 4, %var <i>; yields {i32}:result = 4 * %var</i>
</pre>
</div>
+
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection"> <a name="i_udiv">'<tt>udiv</tt>' Instruction
</a></div>
<h5>Overview:</h5>
<p>The '<tt>udiv</tt>' instruction returns the quotient of its two
operands.</p>
+
<h5>Arguments:</h5>
+
<p>The two arguments to the '<tt>udiv</tt>' instruction must be
-<a href="#t_integer">integer</a> values. Both arguments must have identical
-types. This instruction can also take <a href="#t_vector">vector</a> versions
-of the values in which case the elements must be integers.</p>
+<a href="#t_integer">integer</a> or <a href="#t_vector">vector</a> of integer
+values. Both arguments must have identical types.</p>
+
<h5>Semantics:</h5>
+
<p>The value produced is the unsigned integer quotient of the two operands.</p>
<p>Note that unsigned integer division and signed integer division are distinct
operations; for signed integer division, use '<tt>sdiv</tt>'.</p>
</a> </div>
<div class="doc_text">
<h5>Syntax:</h5>
-<pre> <result> = sdiv <ty> <var1>, <var2> <i>; yields {ty}:result</i>
+<pre>
+ <result> = sdiv <ty> <var1>, <var2> <i>; yields {ty}:result</i>
</pre>
+
<h5>Overview:</h5>
+
<p>The '<tt>sdiv</tt>' instruction returns the quotient of its two
operands.</p>
+
<h5>Arguments:</h5>
-<p>The two arguments to the '<tt>sdiv</tt>' instruction must be
-<a href="#t_integer">integer</a> values. Both arguments must have identical
-types. This instruction can also take <a href="#t_vector">vector</a> versions
-of the values in which case the elements must be integers.</p>
+
+<p>The two arguments to the '<tt>sdiv</tt>' instruction must be
+<a href="#t_integer">integer</a> or <a href="#t_vector">vector</a> of integer
+values. Both arguments must have identical types.</p>
+
<h5>Semantics:</h5>
<p>The value produced is the signed integer quotient of the two operands rounded towards zero.</p>
<p>Note that signed integer division and unsigned integer division are distinct
Instruction</a> </div>
<div class="doc_text">
<h5>Syntax:</h5>
-<pre> <result> = fdiv <ty> <var1>, <var2> <i>; yields {ty}:result</i>
+<pre>
+ <result> = fdiv <ty> <var1>, <var2> <i>; yields {ty}:result</i>
</pre>
<h5>Overview:</h5>
+
<p>The '<tt>fdiv</tt>' instruction returns the quotient of its two
operands.</p>
+
<h5>Arguments:</h5>
+
<p>The two arguments to the '<tt>fdiv</tt>' instruction must be
-<a href="#t_floating">floating point</a> values. Both arguments must have
-identical types. This instruction can also take <a href="#t_vector">vector</a>
-versions of floating point values.</p>
+<a href="#t_floating">floating point</a> or <a href="#t_vector">vector</a>
+of floating point values. Both arguments must have identical types.</p>
+
<h5>Semantics:</h5>
+
<p>The value produced is the floating point quotient of the two operands.</p>
+
<h5>Example:</h5>
-<pre> <result> = fdiv float 4.0, %var <i>; yields {float}:result = 4.0 / %var</i>
+
+<pre>
+ <result> = fdiv float 4.0, %var <i>; yields {float}:result = 4.0 / %var</i>
</pre>
</div>
+
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection"> <a name="i_urem">'<tt>urem</tt>' Instruction</a>
</div>
<p>The '<tt>urem</tt>' instruction returns the remainder from the
unsigned division of its two arguments.</p>
<h5>Arguments:</h5>
-<p>The two arguments to the '<tt>urem</tt>' instruction must be
-<a href="#t_integer">integer</a> values. Both arguments must have identical
-types. This instruction can also take <a href="#t_vector">vector</a> versions
-of the values in which case the elements must be integers.</p>
+<p>The two arguments to the '<tt>urem</tt>' instruction must be
+<a href="#t_integer">integer</a> or <a href="#t_vector">vector</a> of integer
+values. Both arguments must have identical types.</p>
<h5>Semantics:</h5>
<p>This instruction returns the unsigned integer <i>remainder</i> of a division.
This instruction always performs an unsigned division to get the remainder.</p>
</div>
<!-- _______________________________________________________________________ -->
-<div class="doc_subsubsection"> <a name="i_srem">'<tt>srem</tt>'
-Instruction</a> </div>
+<div class="doc_subsubsection">
+ <a name="i_srem">'<tt>srem</tt>' Instruction</a>
+</div>
+
<div class="doc_text">
+
<h5>Syntax:</h5>
-<pre> <result> = srem <ty> <var1>, <var2> <i>; yields {ty}:result</i>
+
+<pre>
+ <result> = srem <ty> <var1>, <var2> <i>; yields {ty}:result</i>
</pre>
+
<h5>Overview:</h5>
+
<p>The '<tt>srem</tt>' instruction returns the remainder from the
signed division of its two operands. This instruction can also take
<a href="#t_vector">vector</a> versions of the values in which case
the elements must be integers.</p>
<h5>Arguments:</h5>
+
<p>The two arguments to the '<tt>srem</tt>' instruction must be
-<a href="#t_integer">integer</a> values. Both arguments must have identical
-types.</p>
+<a href="#t_integer">integer</a> or <a href="#t_vector">vector</a> of integer
+values. Both arguments must have identical types.</p>
+
<h5>Semantics:</h5>
+
<p>This instruction returns the <i>remainder</i> of a division (where the result
has the same sign as the dividend, <tt>var1</tt>), not the <i>modulo</i>
operator (where the result has the same sign as the divisor, <tt>var2</tt>) of
</div>
<!-- _______________________________________________________________________ -->
-<div class="doc_subsubsection"> <a name="i_frem">'<tt>frem</tt>'
-Instruction</a> </div>
+<div class="doc_subsubsection">
+ <a name="i_frem">'<tt>frem</tt>' Instruction</a> </div>
+
<div class="doc_text">
+
<h5>Syntax:</h5>
<pre> <result> = frem <ty> <var1>, <var2> <i>; yields {ty}:result</i>
</pre>
division of its two operands.</p>
<h5>Arguments:</h5>
<p>The two arguments to the '<tt>frem</tt>' instruction must be
-<a href="#t_floating">floating point</a> values. Both arguments must have
-identical types. This instruction can also take <a href="#t_vector">vector</a>
-versions of floating point values.</p>
+<a href="#t_floating">floating point</a> or <a href="#t_vector">vector</a>
+of floating point values. Both arguments must have identical types.</p>
+
<h5>Semantics:</h5>
+
<p>This instruction returns the <i>remainder</i> of a division.
The remainder has the same sign as the dividend.</p>
+
<h5>Example:</h5>
-<pre> <result> = frem float 4.0, %var <i>; yields {float}:result = 4.0 % %var</i>
+
+<pre>
+ <result> = frem float 4.0, %var <i>; yields {float}:result = 4.0 % %var</i>
</pre>
</div>
<h5>Arguments:</h5>
<p>Both arguments to the '<tt>shl</tt>' instruction must be the same <a
- href="#t_integer">integer</a> type.</p>
+ href="#t_integer">integer</a> type. '<tt>var2</tt>' is treated as an
+unsigned value. This instruction does not support
+<a href="#t_vector">vector</a> operands.</p>
<h5>Semantics:</h5>
<h5>Arguments:</h5>
<p>Both arguments to the '<tt>lshr</tt>' instruction must be the same
-<a href="#t_integer">integer</a> type.</p>
+<a href="#t_integer">integer</a> type. '<tt>var2</tt>' is treated as an
+unsigned value. This instruction does not support
+<a href="#t_vector">vector</a> operands.</p>
<h5>Semantics:</h5>
<h5>Arguments:</h5>
<p>Both arguments to the '<tt>ashr</tt>' instruction must be the same
-<a href="#t_integer">integer</a> type.</p>
+<a href="#t_integer">integer</a> type. '<tt>var2</tt>' is treated as an
+unsigned value. This instruction does not support
+<a href="#t_vector">vector</a> operands.</p>
<h5>Semantics:</h5>
<p>This instruction always performs an arithmetic shift right operation,
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection"> <a name="i_and">'<tt>and</tt>'
Instruction</a> </div>
+
<div class="doc_text">
+
<h5>Syntax:</h5>
-<pre> <result> = and <ty> <var1>, <var2> <i>; yields {ty}:result</i>
+
+<pre>
+ <result> = and <ty> <var1>, <var2> <i>; yields {ty}:result</i>
</pre>
+
<h5>Overview:</h5>
+
<p>The '<tt>and</tt>' instruction returns the bitwise logical and of
its two operands.</p>
+
<h5>Arguments:</h5>
-<p>The two arguments to the '<tt>and</tt>' instruction must be <a
- href="#t_integer">integer</a> values. Both arguments must have
-identical types.</p>
+
+<p>The two arguments to the '<tt>and</tt>' instruction must be
+<a href="#t_integer">integer</a> or <a href="#t_vector">vector</a> of integer
+values. Both arguments must have identical types.</p>
+
<h5>Semantics:</h5>
<p>The truth table used for the '<tt>and</tt>' instruction is:</p>
<p> </p>
</table>
</div>
<h5>Example:</h5>
-<pre> <result> = and i32 4, %var <i>; yields {i32}:result = 4 & %var</i>
+<pre>
+ <result> = and i32 4, %var <i>; yields {i32}:result = 4 & %var</i>
<result> = and i32 15, 40 <i>; yields {i32}:result = 8</i>
<result> = and i32 4, 8 <i>; yields {i32}:result = 0</i>
</pre>
<p>The '<tt>or</tt>' instruction returns the bitwise logical inclusive
or of its two operands.</p>
<h5>Arguments:</h5>
-<p>The two arguments to the '<tt>or</tt>' instruction must be <a
- href="#t_integer">integer</a> values. Both arguments must have
-identical types.</p>
+
+<p>The two arguments to the '<tt>or</tt>' instruction must be
+<a href="#t_integer">integer</a> or <a href="#t_vector">vector</a> of integer
+values. Both arguments must have identical types.</p>
<h5>Semantics:</h5>
<p>The truth table used for the '<tt>or</tt>' instruction is:</p>
<p> </p>
or of its two operands. The <tt>xor</tt> is used to implement the
"one's complement" operation, which is the "~" operator in C.</p>
<h5>Arguments:</h5>
-<p>The two arguments to the '<tt>xor</tt>' instruction must be <a
- href="#t_integer">integer</a> values. Both arguments must have
-identical types.</p>
+<p>The two arguments to the '<tt>xor</tt>' instruction must be
+<a href="#t_integer">integer</a> or <a href="#t_vector">vector</a> of integer
+values. Both arguments must have identical types.</p>
+
<h5>Semantics:</h5>
+
<p>The truth table used for the '<tt>xor</tt>' instruction is:</p>
<p> </p>
<div style="align: center">
<h5>Syntax:</h5>
<pre>
- <result> = insertelement <n x <ty>> <val>, <ty> <elt>, i32 <idx> <i>; yields <n x <ty>></i>
+ <result> = insertelement <n x <ty>> <val>, <ty> <elt>, i32 <idx> <i>; yields <n x <ty>></i>
</pre>
<h5>Overview:</h5>
</div>
+<!-- ======================================================================= -->
+<div class="doc_subsection">
+ <a name="aggregateops">Aggregate Operations</a>
+</div>
+
+<div class="doc_text">
+
+<p>LLVM supports several instructions for working with aggregate values.
+</p>
+
+</div>
+
+<!-- _______________________________________________________________________ -->
+<div class="doc_subsubsection">
+ <a name="i_extractvalue">'<tt>extractvalue</tt>' Instruction</a>
+</div>
+
+<div class="doc_text">
+
+<h5>Syntax:</h5>
+
+<pre>
+ <result> = extractvalue <aggregate type> <val>, <idx>{, <idx>}*
+</pre>
+
+<h5>Overview:</h5>
+
+<p>
+The '<tt>extractvalue</tt>' instruction extracts the value of a struct field
+or array element from an aggregate value.
+</p>
+
+
+<h5>Arguments:</h5>
+
+<p>
+The first operand of an '<tt>extractvalue</tt>' instruction is a
+value of <a href="#t_struct">struct</a> or <a href="#t_array">array</a>
+type. The operands are constant indices to specify which value to extract
+in a similar manner as indices in a
+'<tt><a href="#i_getelementptr">getelementptr</a></tt>' instruction.
+</p>
+
+<h5>Semantics:</h5>
+
+<p>
+The result is the value at the position in the aggregate specified by
+the index operands.
+</p>
+
+<h5>Example:</h5>
+
+<pre>
+ %result = extractvalue {i32, float} %agg, 0 <i>; yields i32</i>
+</pre>
+</div>
+
+
+<!-- _______________________________________________________________________ -->
+<div class="doc_subsubsection">
+ <a name="i_insertvalue">'<tt>insertvalue</tt>' Instruction</a>
+</div>
+
+<div class="doc_text">
+
+<h5>Syntax:</h5>
+
+<pre>
+ <result> = insertvalue <aggregate type> <val>, <ty> <val>, <idx> <i>; yields <n x <ty>></i>
+</pre>
+
+<h5>Overview:</h5>
+
+<p>
+The '<tt>insertvalue</tt>' instruction inserts a value
+into a struct field or array element in an aggregate.
+</p>
+
+
+<h5>Arguments:</h5>
+
+<p>
+The first operand of an '<tt>insertvalue</tt>' instruction is a
+value of <a href="#t_struct">struct</a> or <a href="#t_array">array</a> type.
+The second operand is a first-class value to insert.
+The following operands are constant indices
+indicating the position at which to insert the value in a similar manner as
+indices in a
+'<tt><a href="#i_getelementptr">getelementptr</a></tt>' instruction.
+The value to insert must have the same type as the value identified
+by the indices.
+
+<h5>Semantics:</h5>
+
+<p>
+The result is an aggregate of the same type as <tt>val</tt>. Its
+value is that of <tt>val</tt> except that the value at the position
+specified by the indices is that of <tt>elt</tt>.
+</p>
+
+<h5>Example:</h5>
+
+<pre>
+ %result = insertvalue {i32, float} %agg, i32 1, 0 <i>; yields {i32, float}</i>
+</pre>
+</div>
+
+
<!-- ======================================================================= -->
<div class="doc_subsection">
<a name="memoryops">Memory Access and Addressing Operations</a>
bytes of memory from the operating system and returns a pointer of the
appropriate type to the program. If "NumElements" is specified, it is the
number of elements allocated, otherwise "NumElements" is defaulted to be one.
-If an alignment is specified, the value result of the allocation is guaranteed to
+If a constant alignment is specified, the value result of the allocation is guaranteed to
be aligned to at least that boundary. If not specified, or if zero, the target can
choose to align the allocation on any convenient boundary.</p>
<h5>Semantics:</h5>
<p>Memory is allocated using the system "<tt>malloc</tt>" function, and
-a pointer is returned.</p>
+a pointer is returned. The result of a zero byte allocattion is undefined. The
+result is null if there is insufficient memory available.</p>
<h5>Example:</h5>
<h5>Semantics:</h5>
<p>Access to the memory pointed to by the pointer is no longer defined
-after this instruction executes.</p>
+after this instruction executes. If the pointer is null, the operation
+is a noop.</p>
<h5>Example:</h5>
bytes of memory on the runtime stack, returning a pointer of the
appropriate type to the program. If "NumElements" is specified, it is the
number of elements allocated, otherwise "NumElements" is defaulted to be one.
-If an alignment is specified, the value result of the allocation is guaranteed
+If a constant alignment is specified, the value result of the allocation is guaranteed
to be aligned to at least that boundary. If not specified, or if zero, the target
can choose to align the allocation on any convenient boundary.</p>
<h5>Semantics:</h5>
-<p>Memory is allocated; a pointer is returned. '<tt>alloca</tt>'d
+<p>Memory is allocated; a pointer is returned. The operation is undefiend if
+there is insufficient stack space for the allocation. '<tt>alloca</tt>'d
memory is automatically released when the function returns. The '<tt>alloca</tt>'
instruction is commonly used to represent automatic variables that must
have an address available. When the function returns (either with the <tt><a
href="#i_ret">ret</a></tt> or <tt><a href="#i_unwind">unwind</a></tt>
-instructions), the memory is reclaimed.</p>
+instructions), the memory is reclaimed. Allocating zero bytes
+is legal, but the result is undefined.</p>
<h5>Example:</h5>
volatile <tt>load</tt> and <tt><a href="#i_store">store</a></tt>
instructions. </p>
<p>
-The optional "align" argument specifies the alignment of the operation
+The optional constant "align" argument specifies the alignment of the operation
(that is, the alignment of the memory address). A value of 0 or an
omitted "align" argument means that the operation has the preferential
alignment for the target. It is the responsibility of the code emitter
<h5>Arguments:</h5>
<p>There are two arguments to the '<tt>store</tt>' instruction: a value
to store and an address at which to store it. The type of the '<tt><pointer></tt>'
-operand must be a pointer to the type of the '<tt><value></tt>'
+operand must be a pointer to the <a href="#t_firstclass">first class</a> type
+of the '<tt><value></tt>'
operand. If the <tt>store</tt> is marked as <tt>volatile</tt>, then the
optimizer is not allowed to modify the number or order of execution of
this <tt>store</tt> with other volatile <tt>load</tt> and <tt><a
href="#i_store">store</a></tt> instructions.</p>
<p>
-The optional "align" argument specifies the alignment of the operation
+The optional constant "align" argument specifies the alignment of the operation
(that is, the alignment of the memory address). A value of 0 or an
omitted "align" argument means that the operation has the preferential
alignment for the target. It is the responsibility of the code emitter
'<tt>getelementptr</tt>' instruction is used to index down through the type
levels of a structure or to a specific index in an array. When indexing into a
structure, only <tt>i32</tt> integer constants are allowed. When indexing
-into an array or pointer, only integers of 32 or 64 bits are allowed, and will
-be sign extended to 64-bit values.</p>
+into an array or pointer, only integers of 32 or 64 bits are allowed; 32-bit
+values will be sign extended to 64-bits if required.</p>
<p>For example, let's consider a C code fragment and how it gets
compiled to LLVM:</p>
on the pointer type that is being indexed into. <a href="#t_pointer">Pointer</a>
and <a href="#t_array">array</a> types can use a 32-bit or 64-bit
<a href="#t_integer">integer</a> type but the value will always be sign extended
-to 64-bits. <a href="#t_struct">Structure</a> types require <tt>i32</tt>
-<b>constants</b>.</p>
+to 64-bits. <a href="#t_struct">Structure</a> and <a href="#t_pstruct">packed
+structure</a> types require <tt>i32</tt> <b>constants</b>.</p>
<p>In the example above, the first index is indexing into the '<tt>%ST*</tt>'
type, which is a pointer, yielding a '<tt>%ST</tt>' = '<tt>{ i32, double, %RT
<p>Note that it is undefined to access an array out of bounds: array and
pointer indexes must always be within the defined bounds of the array type.
-The one exception for this rules is zero length arrays. These arrays are
+The one exception for this rule is zero length arrays. These arrays are
defined to be accessible as variable length arrays, which requires access
beyond the zero'th element.</p>
</pre>
<h5>Overview:</h5>
+
<p>The '<tt>bitcast</tt>' instruction converts <tt>value</tt> to type
<tt>ty2</tt> without changing any bits.</p>
<h5>Arguments:</h5>
+
<p>The '<tt>bitcast</tt>' instruction takes a value to cast, which must be
a first class value, and a type to cast it to, which must also be a <a
href="#t_firstclass">first class</a> type. The bit sizes of <tt>value</tt>
and the destination type, <tt>ty2</tt>, must be identical. If the source
-type is a pointer, the destination type must also be a pointer.</p>
+type is a pointer, the destination type must also be a pointer. This
+instruction supports bitwise conversion of vectors to integers and to vectors
+of other types (as long as they have the same size).</p>
<h5>Semantics:</h5>
<p>The '<tt>bitcast</tt>' instruction converts <tt>value</tt> to type
</pre>
<h5>Overview:</h5>
<p>The '<tt>icmp</tt>' instruction returns a boolean value based on comparison
-of its two integer operands.</p>
+of its two integer or pointer operands.</p>
<h5>Arguments:</h5>
<p>The '<tt>icmp</tt>' instruction takes three operands. The first operand is
the condition code indicating the kind of comparison to perform. It is not
<a href="#t_floating">floating point</a> typed. They must have identical
types.</p>
<h5>Semantics:</h5>
-<p>The '<tt>fcmp</tt>' compares <tt>var1</tt> and <tt>var2</tt> according to
-the condition code given as <tt>cond</tt>. The comparison performed always
-yields a <a href="#t_primitive">i1</a> result, as follows:
+<p>The '<tt>fcmp</tt>' instruction compares <tt>var1</tt> and <tt>var2</tt>
+according to the condition code given as <tt>cond</tt>. The comparison performed
+
always yields a <a href="#t_primitive">i1</a> result, as follows:
<ol>
<li><tt>false</tt>: always yields <tt>false</tt>, regardless of operands.</li>
<li><tt>oeq</tt>: yields <tt>true</tt> if both operands are not a QNAN and
</div>
<!-- _______________________________________________________________________ -->
-<div class="doc_subsubsection"> <a name="i_phi">'<tt>phi</tt>'
-Instruction</a> </div>
+<div class="doc_subsubsection">
+ <a name="i_vicmp">'<tt>vicmp</tt>' Instruction</a>
+</div>
+<div class="doc_text">
+<h5>Syntax:</h5>
+<pre> <result> = vicmp <cond> <ty> <var1>, <var2> <i>; yields {ty}:result</i>
+</pre>
+<h5>Overview:</h5>
+<p>The '<tt>vicmp</tt>' instruction returns an integer vector value based on
+element-wise comparison of its two integer vector operands.</p>
+<h5>Arguments:</h5>
+<p>The '<tt>vicmp</tt>' instruction takes three operands. The first operand is
+the condition code indicating the kind of comparison to perform. It is not
+a value, just a keyword. The possible condition code are:
+<ol>
+ <li><tt>eq</tt>: equal</li>
+ <li><tt>ne</tt>: not equal </li>
+ <li><tt>ugt</tt>: unsigned greater than</li>
+ <li><tt>uge</tt>: unsigned greater or equal</li>
+ <li><tt>ult</tt>: unsigned less than</li>
+ <li><tt>ule</tt>: unsigned less or equal</li>
+ <li><tt>sgt</tt>: signed greater than</li>
+ <li><tt>sge</tt>: signed greater or equal</li>
+ <li><tt>slt</tt>: signed less than</li>
+ <li><tt>sle</tt>: signed less or equal</li>
+</ol>
+<p>The remaining two arguments must be <a href="#t_vector">vector</a> of
+<a href="#t_integer">integer</a> typed. They must also be identical types.</p>
+<h5>Semantics:</h5>
+<p>The '<tt>vicmp</tt>' instruction compares <tt>var1</tt> and <tt>var2</tt>
+according to the condition code given as <tt>cond</tt>. The comparison yields a
+<a href="#t_vector">vector</a> of <a href="#t_integer">integer</a> result, of
+identical type as the values being compared. The most significant bit in each
+element is 1 if the element-wise comparison evaluates to true, and is 0
+otherwise. All other bits of the result are undefined. The condition codes
+are evaluated identically to the <a href="#i_icmp">'<tt>icmp</tt>'
+instruction</a>.
+
+<h5>Example:</h5>
+<pre>
+ <result> = vicmp eq <2 x i32> < i32 4, i32 0>, < i32 5, i32 0> <i>; yields: result=<2 x i32> < i32 0, i32 -1 ></i>
+ <result> = vicmp ult <2 x i8 > < i8 1, i8 2>, < i8 2, i8 2 > <i>; yields: result=<2 x i8> < i8 -1, i8 0 ></i>
+</pre>
+</div>
+
+<!-- _______________________________________________________________________ -->
+<div class="doc_subsubsection">
+ <a name="i_vfcmp">'<tt>vfcmp</tt>' Instruction</a>
+</div>
+<div class="doc_text">
+<h5>Syntax:</h5>
+<pre> <result> = vfcmp <cond> <ty> <var1>, <var2></pre>
+<h5>Overview:</h5>
+<p>The '<tt>vfcmp</tt>' instruction returns an integer vector value based on
+element-wise comparison of its two floating point vector operands. The output
+elements have the same width as the input elements.</p>
+<h5>Arguments:</h5>
+<p>The '<tt>vfcmp</tt>' instruction takes three operands. The first operand is
+the condition code indicating the kind of comparison to perform. It is not
+a value, just a keyword. The possible condition code are:
+<ol>
+ <li><tt>false</tt>: no comparison, always returns false</li>
+ <li><tt>oeq</tt>: ordered and equal</li>
+ <li><tt>ogt</tt>: ordered and greater than </li>
+ <li><tt>oge</tt>: ordered and greater than or equal</li>
+ <li><tt>olt</tt>: ordered and less than </li>
+ <li><tt>ole</tt>: ordered and less than or equal</li>
+ <li><tt>one</tt>: ordered and not equal</li>
+ <li><tt>ord</tt>: ordered (no nans)</li>
+ <li><tt>ueq</tt>: unordered or equal</li>
+ <li><tt>ugt</tt>: unordered or greater than </li>
+ <li><tt>uge</tt>: unordered or greater than or equal</li>
+ <li><tt>ult</tt>: unordered or less than </li>
+ <li><tt>ule</tt>: unordered or less than or equal</li>
+ <li><tt>une</tt>: unordered or not equal</li>
+ <li><tt>uno</tt>: unordered (either nans)</li>
+ <li><tt>true</tt>: no comparison, always returns true</li>
+</ol>
+<p>The remaining two arguments must be <a href="#t_vector">vector</a> of
+<a href="#t_floating">floating point</a> typed. They must also be identical
+types.</p>
+<h5>Semantics:</h5>
+<p>The '<tt>vfcmp</tt>' instruction compares <tt>var1</tt> and <tt>var2</tt>
+according to the condition code given as <tt>cond</tt>. The comparison yields a
+<a href="#t_vector">vector</a> of <a href="#t_integer">integer</a> result, with
+an identical number of elements as the values being compared, and each element
+having identical with to the width of the floating point elements. The most
+significant bit in each element is 1 if the element-wise comparison evaluates to
+true, and is 0 otherwise. All other bits of the result are undefined. The
+condition codes are evaluated identically to the
+<a href="#i_fcmp">'<tt>fcmp</tt>' instruction</a>.
+
+<h5>Example:</h5>
+<pre>
+ <result> = vfcmp oeq <2 x float> < float 4, float 0 >, < float 5, float 0 > <i>; yields: result=<2 x i32> < i32 0, i32 -1 ></i>
+ <result> = vfcmp ult <2 x double> < double 1, double 2 >, < double 2, double 2> <i>; yields: result=<2 x i64> < i64 -1, i64 0 ></i>
+</pre>
+</div>
+
+<!-- _______________________________________________________________________ -->
+<div class="doc_subsubsection">
+ <a name="i_phi">'<tt>phi</tt>' Instruction</a>
+</div>
+
<div class="doc_text">
+
<h5>Syntax:</h5>
+
<pre> <result> = phi <ty> [ <val0>, <label0>], ...<br></pre>
<h5>Overview:</h5>
<p>The '<tt>phi</tt>' instruction is used to implement the φ node in
the SSA graph representing the function.</p>
<h5>Arguments:</h5>
+
<p>The type of the incoming values is specified with the first type
field. After this, the '<tt>phi</tt>' instruction takes a list of pairs
as arguments, with one pair for each predecessor basic block of the
current block. Only values of <a href="#t_firstclass">first class</a>
type may be used as the value arguments to the PHI node. Only labels
may be used as the label arguments.</p>
+
<p>There must be no non-phi instructions between the start of a basic
block and the PHI instructions: i.e. PHI instructions must be first in
a basic block.</p>
+
<h5>Semantics:</h5>
+
<p>At runtime, the '<tt>phi</tt>' instruction logically takes on the value
specified by the pair corresponding to the predecessor basic block that executed
just prior to the current block.</p>
+
<h5>Example:</h5>
-<pre>Loop: ; Infinite loop that counts from 0 on up...<br> %indvar = phi i32 [ 0, %LoopHeader ], [ %nextindvar, %Loop ]<br> %nextindvar = add i32 %indvar, 1<br> br label %Loop<br></pre>
+<pre>
+Loop: ; Infinite loop that counts from 0 on up...
+ %indvar = phi i32 [ 0, %LoopHeader ], [ %nextindvar, %Loop ]
+ %nextindvar = add i32 %indvar, 1
+ br label %Loop
+</pre>
</div>
<!-- _______________________________________________________________________ -->
<h5>Arguments:</h5>
<p>
-The '<tt>select</tt>' instruction requires a boolean value indicating the condition, and two values of the same <a href="#t_firstclass">first class</a> type.
+The '<tt>select</tt>' instruction requires an 'i1' value indicating the
+condition, and two values of the same <a href="#t_firstclass">first class</a>
+type. If the val1/val2 are vectors, the entire vectors are selected, not
+individual elements.
</p>
<h5>Semantics:</h5>
<p>
-If the boolean condition evaluates to true, the instruction returns the first
+If the i1 condition evaluates is 1, the instruction returns the first
value argument; otherwise, it returns the second value argument.
</p>
<h5>Arguments:</h5>
<p>The '<tt>getresult</tt>' instruction takes a call or invoke value as its
-first argument. The value must have <a href="#t_struct">structure type</a>.
-The second argument is an unsigned index value which must be in range for
-the number of values returned by the call.</p>
+first argument, or an undef value. The value must have <a
+href="#t_struct">structure type</a>. The second argument is a constant
+unsigned index value which must be in range for the number of values returned
+by the call.</p>
<h5>Semantics:</h5>
<h5>Semantics:</h5>
-<p>At runtime, a call to this intrinsics stores a null pointer into the "ptrloc"
+<p>At runtime, a call to this intrinsic stores a null pointer into the "ptrloc"
location. At compile-time, the code generator generates information to allow
the runtime to find the pointer at GC safe points. The '<tt>llvm.gcroot</tt>'
intrinsic may only be used in a function which <a href="#gc">specifies a GC
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="int_atomic_lcs">'<tt>llvm.atomic.lcs.*</tt>' Intrinsic</a>
+ <a name="int_atomic_cmp_swap">'<tt>llvm.atomic.cmp.swap.*</tt>' Intrinsic</a>
</div>
<div class="doc_text">
<h5>Syntax:</h5>
<p>
- This is an overloaded intrinsic. You can use <tt>llvm.atomic.lcs</tt> on any
+ This is an overloaded intrinsic. You can use <tt>llvm.atomic.cmp.swap</tt> on any
integer bit width. Not all targets support all bit widths however.</p>
<pre>
-declare i8 @llvm.atomic.lcs.i8( i8* <ptr>, i8 <cmp>, i8 <val> )
-declare i16 @llvm.atomic.lcs.i16( i16* <ptr>, i16 <cmp>, i16 <val> )
-declare i32 @llvm.atomic.lcs.i32( i32* <ptr>, i32 <cmp>, i32 <val> )
-declare i64 @llvm.atomic.lcs.i64( i64* <ptr>, i64 <cmp>, i64 <val> )
+declare i8 @llvm.atomic.cmp.swap.i8( i8* <ptr>, i8 <cmp>, i8 <val> )
+declare i16 @llvm.atomic.cmp.swap.i16( i16* <ptr>, i16 <cmp>, i16 <val> )
+declare i32 @llvm.atomic.cmp.swap.i32( i32* <ptr>, i32 <cmp>, i32 <val> )
+declare i64 @llvm.atomic.cmp.swap.i64( i64* <ptr>, i64 <cmp>, i64 <val> )
</pre>
<h5>Overview:</h5>
</p>
<h5>Arguments:</h5>
<p>
- The <tt>llvm.atomic.lcs</tt> intrinsic takes three arguments. The result as
+ The <tt>llvm.atomic.cmp.swap</tt> intrinsic takes three arguments. The result as
well as both <tt>cmp</tt> and <tt>val</tt> must be integer values with the
same bit width. The <tt>ptr</tt> argument must be a pointer to a value of
this integer type. While any bit width integer may be used, targets may only
store i32 4, %ptr
%val1 = add i32 4, 4
-%result1 = call i32 @llvm.atomic.lcs.i32( i32* %ptr, i32 4, %val1 )
+%result1 = call i32 @llvm.atomic.cmp.swap.i32( i32* %ptr, i32 4, %val1 )
<i>; yields {i32}:result1 = 4</i>
%stored1 = icmp eq i32 %result1, 4 <i>; yields {i1}:stored1 = true</i>
%memval1 = load i32* %ptr <i>; yields {i32}:memval1 = 8</i>
%val2 = add i32 1, 1
-%result2 = call i32 @llvm.atomic.lcs.i32( i32* %ptr, i32 5, %val2 )
+%result2 = call i32 @llvm.atomic.cmp.swap.i32( i32* %ptr, i32 5, %val2 )
<i>; yields {i32}:result2 = 8</i>
%stored2 = icmp eq i32 %result2, 5 <i>; yields {i1}:stored2 = false</i>
<h5>Arguments:</h5>
<p>
- The <tt>llvm.atomic.ls</tt> intrinsic takes two arguments. Both the
+ The <tt>llvm.atomic.swap</tt> intrinsic takes two arguments. Both the
<tt>val</tt> argument and the result must be integers of the same bit width.
The first argument, <tt>ptr</tt>, must be a pointer to a value of this
integer type. The targets may only lower integer representations they
<!-- _______________________________________________________________________ -->
<div class="doc_subsubsection">
- <a name="int_atomic_las">'<tt>llvm.atomic.las.*</tt>' Intrinsic</a>
+ <a name="int_atomic_load_add">'<tt>llvm.atomic.load.add.*</tt>' Intrinsic</a>
</div>
<div class="doc_text">
<h5>Syntax:</h5>
<p>
- This is an overloaded intrinsic. You can use <tt>llvm.atomic.las</tt> on any
+ This is an overloaded intrinsic. You can use <tt>llvm.atomic.load.add</tt> on any
integer bit width. Not all targets support all bit widths however.</p>
<pre>
-declare i8 @llvm.atomic.las.i8.( i8* <ptr>, i8 <delta> )
-declare i16 @llvm.atomic.las.i16.( i16* <ptr>, i16 <delta> )
-declare i32 @llvm.atomic.las.i32.( i32* <ptr>, i32 <delta> )
-declare i64 @llvm.atomic.las.i64.( i64* <ptr>, i64 <delta> )
+declare i8 @llvm.atomic.load.add.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.add.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.add.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.add.i64.( i64* <ptr>, i64 <delta> )
</pre>
<h5>Overview:</h5>
<pre>
%ptr = malloc i32
store i32 4, %ptr
-%result1 = call i32 @llvm.atomic.las.i32( i32* %ptr, i32 4 )
+%result1 = call i32 @llvm.atomic.load.add.i32( i32* %ptr, i32 4 )
<i>; yields {i32}:result1 = 4</i>
-%result2 = call i32 @llvm.atomic.las.i32( i32* %ptr, i32 2 )
+%result2 = call i32 @llvm.atomic.load.add.i32( i32* %ptr, i32 2 )
<i>; yields {i32}:result2 = 8</i>
-%result3 = call i32 @llvm.atomic.las.i32( i32* %ptr, i32 5 )
+%result3 = call i32 @llvm.atomic.load.add.i32( i32* %ptr, i32 5 )
<i>; yields {i32}:result3 = 10</i>
-%memval = load i32* %ptr <i>; yields {i32}:memval1 = 15</i>
+%memval1 = load i32* %ptr <i>; yields {i32}:memval1 = 15</i>
+</pre>
+</div>
+
+<!-- _______________________________________________________________________ -->
+<div class="doc_subsubsection">
+ <a name="int_atomic_load_sub">'<tt>llvm.atomic.load.sub.*</tt>' Intrinsic</a>
+
+</div>
+<div class="doc_text">
+<h5>Syntax:</h5>
+<p>
+ This is an overloaded intrinsic. You can use <tt>llvm.atomic.load.sub</tt> on
+ any integer bit width. Not all targets support all bit widths however.</p>
+<pre>
+declare i8 @llvm.atomic.load.sub.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.sub.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.sub.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.sub.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+<h5>Overview:</h5>
+<p>
+ This intrinsic subtracts <tt>delta</tt> to the value stored in memory at
+ <tt>ptr</tt>. It yields the original value at <tt>ptr</tt>.
+</p>
+<h5>Arguments:</h5>
+<p>
+
+ The intrinsic takes two arguments, the first a pointer to an integer value
+ and the second an integer value. The result is also an integer value. These
+ integer types can have any bit width, but they must all have the same bit
+ width. The targets may only lower integer representations they support.
+</p>
+<h5>Semantics:</h5>
+<p>
+ This intrinsic does a series of operations atomically. It first loads the
+ value stored at <tt>ptr</tt>. It then subtracts <tt>delta</tt>, stores the
+ result to <tt>ptr</tt>. It yields the original value stored at <tt>ptr</tt>.
+</p>
+
+<h5>Examples:</h5>
+<pre>
+%ptr = malloc i32
+ store i32 8, %ptr
+%result1 = call i32 @llvm.atomic.load.sub.i32( i32* %ptr, i32 4 )
+ <i>; yields {i32}:result1 = 8</i>
+%result2 = call i32 @llvm.atomic.load.sub.i32( i32* %ptr, i32 2 )
+ <i>; yields {i32}:result2 = 4</i>
+%result3 = call i32 @llvm.atomic.load.sub.i32( i32* %ptr, i32 5 )
+ <i>; yields {i32}:result3 = 2</i>
+%memval1 = load i32* %ptr <i>; yields {i32}:memval1 = -3</i>
+</pre>
+</div>
+
+<!-- _______________________________________________________________________ -->
+<div class="doc_subsubsection">
+ <a name="int_atomic_load_and">'<tt>llvm.atomic.load.and.*</tt>' Intrinsic</a><br>
+ <a name="int_atomic_load_nand">'<tt>llvm.atomic.load.nand.*</tt>' Intrinsic</a><br>
+ <a name="int_atomic_load_or">'<tt>llvm.atomic.load.or.*</tt>' Intrinsic</a><br>
+ <a name="int_atomic_load_xor">'<tt>llvm.atomic.load.xor.*</tt>' Intrinsic</a><br>
+
+</div>
+<div class="doc_text">
+<h5>Syntax:</h5>
+<p>
+ These are overloaded intrinsics. You can use <tt>llvm.atomic.load_and</tt>,
+ <tt>llvm.atomic.load_nand</tt>, <tt>llvm.atomic.load_or</tt>, and
+ <tt>llvm.atomic.load_xor</tt> on any integer bit width. Not all targets
+ support all bit widths however.</p>
+<pre>
+declare i8 @llvm.atomic.load.and.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.and.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.and.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.and.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+
+<pre>
+declare i8 @llvm.atomic.load.or.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.or.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.or.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.or.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+
+<pre>
+declare i8 @llvm.atomic.load.nand.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.nand.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.nand.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.nand.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+
+<pre>
+declare i8 @llvm.atomic.load.xor.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.xor.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.xor.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.xor.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+<h5>Overview:</h5>
+<p>
+ These intrinsics bitwise the operation (and, nand, or, xor) <tt>delta</tt> to
+ the value stored in memory at <tt>ptr</tt>. It yields the original value
+ at <tt>ptr</tt>.
+</p>
+<h5>Arguments:</h5>
+<p>
+
+ These intrinsics take two arguments, the first a pointer to an integer value
+ and the second an integer value. The result is also an integer value. These
+ integer types can have any bit width, but they must all have the same bit
+ width. The targets may only lower integer representations they support.
+</p>
+<h5>Semantics:</h5>
+<p>
+ These intrinsics does a series of operations atomically. They first load the
+ value stored at <tt>ptr</tt>. They then do the bitwise operation
+ <tt>delta</tt>, store the result to <tt>ptr</tt>. They yield the original
+ value stored at <tt>ptr</tt>.
+</p>
+
+<h5>Examples:</h5>
+<pre>
+%ptr = malloc i32
+ store i32 0x0F0F, %ptr
+%result0 = call i32 @llvm.atomic.load.nand.i32( i32* %ptr, i32 0xFF )
+ <i>; yields {i32}:result0 = 0x0F0F</i>
+%result1 = call i32 @llvm.atomic.load.and.i32( i32* %ptr, i32 0xFF )
+ <i>; yields {i32}:result1 = 0xFFFFFFF0</i>
+%result2 = call i32 @llvm.atomic.load.or.i32( i32* %ptr, i32 0F )
+ <i>; yields {i32}:result2 = 0xF0</i>
+%result3 = call i32 @llvm.atomic.load.xor.i32( i32* %ptr, i32 0F )
+ <i>; yields {i32}:result3 = FF</i>
+%memval1 = load i32* %ptr <i>; yields {i32}:memval1 = F0</i>
</pre>
</div>
+<!-- _______________________________________________________________________ -->
+<div class="doc_subsubsection">
+ <a name="int_atomic_load_max">'<tt>llvm.atomic.load.max.*</tt>' Intrinsic</a><br>
+ <a name="int_atomic_load_min">'<tt>llvm.atomic.load.min.*</tt>' Intrinsic</a><br>
+ <a name="int_atomic_load_umax">'<tt>llvm.atomic.load.umax.*</tt>' Intrinsic</a><br>
+ <a name="int_atomic_load_umin">'<tt>llvm.atomic.load.umin.*</tt>' Intrinsic</a><br>
+
+</div>
+<div class="doc_text">
+<h5>Syntax:</h5>
+<p>
+ These are overloaded intrinsics. You can use <tt>llvm.atomic.load_max</tt>,
+ <tt>llvm.atomic.load_min</tt>, <tt>llvm.atomic.load_umax</tt>, and
+ <tt>llvm.atomic.load_umin</tt> on any integer bit width. Not all targets
+ support all bit widths however.</p>
+<pre>
+declare i8 @llvm.atomic.load.max.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.max.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.max.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.max.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+
+<pre>
+declare i8 @llvm.atomic.load.min.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.min.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.min.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.min.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+
+<pre>
+declare i8 @llvm.atomic.load.umax.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.umax.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.umax.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.umax.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+
+<pre>
+declare i8 @llvm.atomic.load.umin.i8.( i8* <ptr>, i8 <delta> )
+declare i16 @llvm.atomic.load.umin.i16.( i16* <ptr>, i16 <delta> )
+declare i32 @llvm.atomic.load.umin.i32.( i32* <ptr>, i32 <delta> )
+declare i64 @llvm.atomic.load.umin.i64.( i64* <ptr>, i64 <delta> )
+
+</pre>
+<h5>Overview:</h5>
+<p>
+ These intrinsics takes the signed or unsigned minimum or maximum of
+ <tt>delta</tt> and the value stored in memory at <tt>ptr</tt>. It yields the
+ original value at <tt>ptr</tt>.
+</p>
+<h5>Arguments:</h5>
+<p>
+
+ These intrinsics take two arguments, the first a pointer to an integer value
+ and the second an integer value. The result is also an integer value. These
+ integer types can have any bit width, but they must all have the same bit
+ width. The targets may only lower integer representations they support.
+</p>
+<h5>Semantics:</h5>
+<p>
+ These intrinsics does a series of operations atomically. They first load the
+ value stored at <tt>ptr</tt>. They then do the signed or unsigned min or max
+ <tt>delta</tt> and the value, store the result to <tt>ptr</tt>. They yield
+ the original value stored at <tt>ptr</tt>.
+</p>
+
+<h5>Examples:</h5>
+<pre>
+%ptr = malloc i32
+ store i32 7, %ptr
+%result0 = call i32 @llvm.atomic.load.min.i32( i32* %ptr, i32 -2 )
+ <i>; yields {i32}:result0 = 7</i>
+%result1 = call i32 @llvm.atomic.load.max.i32( i32* %ptr, i32 8 )
+ <i>; yields {i32}:result1 = -2</i>
+%result2 = call i32 @llvm.atomic.load.umin.i32( i32* %ptr, i32 10 )
+ <i>; yields {i32}:result2 = 8</i>
+%result3 = call i32 @llvm.atomic.load.umax.i32( i32* %ptr, i32 30 )
+ <i>; yields {i32}:result3 = 8</i>
+%memval1 = load i32* %ptr <i>; yields {i32}:memval1 = 30</i>
+</pre>
+</div>
+
<!-- ======================================================================= -->
<div class="doc_subsection">
<a name="int_general">General Intrinsics</a>
projects / oota-llvm.git / blobdiff