#--------------------------------------------------------------------
# Set the VPATH so that we can find source files.
#--------------------------------------------------------------------
-VPATH=$(BUILD_SRC_DIR)
+VPATH=$(PROJ_SRC_DIR)
#--------------------------------------------------------------------
# Reset the list of suffixes we know how to build
#--------------------------------------------------------------------
.SUFFIXES:
-.SUFFIXES: .c .cpp .h .hpp .y .l .lo .o .a .bc .td .ps .dot
+.SUFFIXES: .c .cpp .cc .h .hpp .y .l .lo .o .a .bc .td .ps .dot
.SUFFIXES: $(SHLIBEXT) $(SUFFIXES)
#--------------------------------------------------------------------
################################################################################
SrcMakefiles := $(filter %Makefile %Makefile.tests,\
- $(wildcard $(BUILD_SRC_DIR)/Makefile*))
-ObjMakefiles := $(subst $(BUILD_SRC_DIR),$(BUILD_OBJ_DIR),$(SrcMakefiles))
-ConfigureScript := $(LLVM_SRC_ROOT)/configure
-ConfigStatusScript := $(LLVM_OBJ_ROOT)/config.status
-MakefileConfigIn := $(LLVM_SRC_ROOT)/Makefile.config.in
-MakefileConfig := $(LLVM_OBJ_ROOT)/Makefile.config
-PreConditions := $(ConfigStatusScript) $(MakefileConfig) $(ObjMakefiles)
+ $(wildcard $(PROJ_SRC_DIR)/Makefile*))
+ObjMakefiles := $(subst $(PROJ_SRC_DIR),$(PROJ_OBJ_DIR),$(SrcMakefiles))
+ConfigureScript := $(PROJ_SRC_ROOT)/configure
+ConfigStatusScript := $(PROJ_OBJ_ROOT)/config.status
+MakefileConfigIn := $(strip $(wildcard $(PROJ_SRC_ROOT)/Makefile.config.in))
+MakefileCommonIn := $(strip $(wildcard $(PROJ_SRC_ROOT)/Makefile.common.in))
+MakefileConfig := $(PROJ_OBJ_ROOT)/Makefile.config
+MakefileCommon := $(PROJ_OBJ_ROOT)/Makefile.common
+PreConditions := $(ConfigStatusScript) $(ObjMakefiles)
+ifneq ($(MakefileCommonIn),)
+PreConditions += $(MakefileCommon)
+endif
+ifneq ($(MakefileConfigIn),)
+PreConditions += $(MakefileConfig)
+endif
preconditions : $(PreConditions)
-$(Verb) $(RM) -f $(BUILT_SOURCES)
endif
-ifneq ($(BUILD_OBJ_ROOT),$(BUILD_SRC_ROOT))
+ifneq ($(PROJ_OBJ_ROOT),$(PROJ_SRC_ROOT))
spotless:
$(Verb) if test -x config.status ; then \
- $(EchoCmd) Wiping out $(BUILD_OBJ_ROOT) ; \
+ $(EchoCmd) Wiping out $(PROJ_OBJ_ROOT) ; \
$(MKDIR) .spotless.save ; \
$(MV) config.status .spotless.save ; \
$(MV) mklib .spotless.save ; \
$(MV) .spotless.save/mklib . ; \
$(MV) .spotless.save/projects . ; \
$(RM) -rf .spotless.save ; \
- $(EchoCmd) Rebuilding configuration of $(BUILD_OBJ_ROOT) ; \
+ $(EchoCmd) Rebuilding configuration of $(PROJ_OBJ_ROOT) ; \
$(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
$(ConfigStatusScript) ; \
else \
- $(EchoCmd) "make spotless" can only be run from $(BUILD_OBJ_ROOT); \
+ $(EchoCmd) "make spotless" can only be run from $(PROJ_OBJ_ROOT); \
fi
endif
# Make sure we're not using a stale configuration
#------------------------------------------------------------------------
reconfigure:
- $(Echo) Reconfiguring $(BUILD_OBJ_ROOT)
- $(Verb) cd $(BUILD_OBJ_ROOT) && \
- if test -w $(BUILD_OBJ_ROOT)/config.cache ; then \
- $(RM) $(BUILD_OBJ_ROOT)/config.cache ; \
+ $(Echo) Reconfiguring $(PROJ_OBJ_ROOT)
+ $(Verb) cd $(PROJ_OBJ_ROOT) && \
+ if test -w $(PROJ_OBJ_ROOT)/config.cache ; then \
+ $(RM) $(PROJ_OBJ_ROOT)/config.cache ; \
fi ; \
$(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
$(ConfigStatusScript)
.PRECIOUS: $(ConfigStatusScript)
$(ConfigStatusScript): $(ConfigureScript)
$(Echo) Reconfiguring with $<
- $(Verb) cd $(BUILD_OBJ_ROOT) && \
- if test -w $(BUILD_OBJ_ROOT)/config.cache ; then \
- $(RM) $(BUILD_OBJ_ROOT)/config.cache ; \
+ $(Verb) cd $(PROJ_OBJ_ROOT) && \
+ if test -w $(PROJ_OBJ_ROOT)/config.cache ; then \
+ $(RM) $(PROJ_OBJ_ROOT)/config.cache ; \
fi ; \
$(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
$(ConfigStatusScript)
#------------------------------------------------------------------------
# Make sure the configuration makefile is up to date
#------------------------------------------------------------------------
+ifneq ($(MakefileConfigIn),)
$(MakefileConfig): $(MakefileConfigIn) $(ConfigStatusScript)
$(Echo) Regenerating $@
- $(Verb) cd $(LLVM_OBJ_ROOT) ; $(ConfigStatusScript) Makefile.config
+ $(Verb) cd $(PROJ_OBJ_ROOT) ; $(ConfigStatusScript) Makefile.config
+endif
+
+ifneq ($(MakefileCommonIn),)
+$(MakefileCommon): $(MakefileCommonIn) $(ConfigStatusScript)
+ $(Echo) Regenerating $@
+ $(Verb) cd $(PROJ_OBJ_ROOT) ; $(ConfigStatusScript) Makefile.common
+endif
#------------------------------------------------------------------------
# If the Makefile in the source tree has been updated, copy it over into the
# build tree. But, only do this if the source and object makefiles differ
#------------------------------------------------------------------------
-ifneq ($(BUILD_OBJ_DIR),$(BUILD_SRC_DIR))
+ifneq ($(PROJ_OBJ_DIR),$(PROJ_SRC_DIR))
-Makefile: $(BUILD_SRC_DIR)/Makefile
+Makefile: $(PROJ_SRC_DIR)/Makefile
$(Echo) "Updating Makefile"
$(Verb) $(MKDIR) $(@D)
$(Verb) $(CP) -f $< $@
# Copy the Makefile.* files unless we're in the root directory which avoids
# the copying of Makefile.config.in or other things that should be explicitly
# taken care of.
-$(BUILD_OBJ_DIR)/Makefile% : $(BUILD_SRC_DIR)/Makefile%
+$(PROJ_OBJ_DIR)/Makefile% : $(PROJ_SRC_DIR)/Makefile%
@case '$?' in \
*Makefile.rules) ;; \
*.in) ;; \
# Variables derived from configuration we are building
#--------------------------------------------------------------------
+
ifdef ENABLE_PROFILING
BuildMode := Profile
CXX.Flags := -O3 -DNDEBUG -felide-constructors -finline-functions -pg
else
ifdef ENABLE_OPTIMIZED
BuildMode := Release
- CXX.Flags := -O3 -DNDEBUG -finline-functions \
- -felide-constructors -fomit-frame-pointer
- C.Flags := -O3 -DNDEBUG -fomit-frame-pointer
+ # Don't use -fomit-frame-pointer on FreeBSD
+ ifneq ($(OS),FreeBSD)
+ OmitFramePointer := -fomit-frame-pointer
+ endif
+ CXX.Flags := -O3 -DNDEBUG -finline-functions -felide-constructors \
+ $(OmitFramePointer)
+ C.Flags := -O3 -DNDEBUG $(OmitFramePointer)
LD.Flags := -O3 -DNDEBUG
else
BuildMode := Debug
AR.Flags := cru
LibTool.Flags := --tag=CXX
+#Make Floating point ieee complient on alpha
+ifeq ($(ARCH),Alpha)
+ CXX.Flags += -mieee
+ CPP.Flags += -mieee
+endif
+
#--------------------------------------------------------------------
# Directory locations
#--------------------------------------------------------------------
-ObjDir := $(BUILD_OBJ_DIR)/$(BuildMode)
-LibDir := $(BUILD_OBJ_ROOT)/$(BuildMode)/lib
-ToolDir := $(BUILD_OBJ_ROOT)/$(BuildMode)/bin
-ExmplDir := $(BUILD_OBJ_ROOT)/$(BuildMode)/examples
+ObjDir := $(PROJ_OBJ_DIR)/$(BuildMode)
+LibDir := $(PROJ_OBJ_ROOT)/$(BuildMode)/lib
+ToolDir := $(PROJ_OBJ_ROOT)/$(BuildMode)/bin
+ExmplDir := $(PROJ_OBJ_ROOT)/$(BuildMode)/examples
LLVMLibDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/lib
LLVMToolDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/bin
-LExmplDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/examples
+LLVMExmplDir:= $(LLVM_OBJ_ROOT)/$(BuildMode)/examples
CFERuntimeLibDir := $(LLVMGCCDIR)/lib
#--------------------------------------------------------------------
# Full Paths To Compiled Tools and Utilities
#--------------------------------------------------------------------
-EchoCmd := $(ECHO) llvm[$(MAKELEVEL)]:
-Echo := @$(EchoCmd)
+EchoCmd = $(ECHO) llvm[$(MAKELEVEL)]:
+Echo = @$(EchoCmd)
ifndef LIBTOOL
LIBTOOL := $(LLVM_OBJ_ROOT)/mklib
endif
ifndef LOPT
LOPT := $(LLVMToolDir)/opt$(EXEEXT)
endif
-LLVMGCCWITHPATH := PATH=$(LLVMToolDir):$(PATH) $(LLVMGCC)
-LLVMGXXWITHPATH := PATH=$(LLVMToolDir):$(PATH) $(LLVMGXX)
+ifndef LBUGPOINT
+LBUGPOINT := $(LLVMToolDir)/bugpoint$(EXEEXT)
+endif
+
+LLVMGCCWITHPATH := PATH="$(LLVMToolDir):$(PATH)" $(LLVMGCC)
+LLVMGXXWITHPATH := PATH="$(LLVMToolDir):$(PATH)" $(LLVMGXX)
#--------------------------------------------------------------------
# Adjust to user's request
#--------------------------------------------------------------------
-# Adjust LIBTOOL flags for shared libraries, or not.
-ifndef SHARED_LIBRARY
- LibTool.Flags += --tag=disable-shared
-else
+# Adjust LD.Flags and Libtool.Flags depending on the kind of library that is
+# to be built. Note that if LOADABLE_MODULE is specified then the resulting
+# shared library can be opened with dlopen
+ifdef SHARED_LIBRARY
LD.Flags += -rpath $(LibDir)
+ ifdef LOADABLE_MODULE
+ LD.Flags += -module
+ endif
+else
+ LibTool.Flags += --tag=disable-shared
endif
ifdef TOOL_VERBOSE
Verb := @
LibTool.Flags += --silent
AR.Flags += >/dev/null 2>/dev/null
- ConfigureScriptFLAGS += >$(BUILD_OBJ_DIR)/configure.out 2>&1
+ ConfigureScriptFLAGS += >$(PROJ_OBJ_DIR)/configure.out 2>&1
else
ConfigureScriptFLAGS :=
endif
CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused
-LD.Flags += -L$(LibDir) -L$(LLVMLibDir)
-CPP.Flags += -I$(BUILD_OBJ_DIR) \
- -I$(BUILD_SRC_DIR) \
- -I$(BUILD_SRC_ROOT)/include \
- -I$(BUILD_OBJ_ROOT)/include \
- -I$(LLVM_OBJ_ROOT)/include \
- -I$(LLVM_SRC_ROOT)/include \
- -D_GNU_SOURCE -D__STDC_LIMIT_MACROS
+LD.Flags += -L$(LibDir) -L$(LLVMLibDir)
+CPP.Flags += -I$(PROJ_OBJ_DIR) -I$(PROJ_SRC_DIR) \
+ -I$(PROJ_OBJ_ROOT)/include \
+ -I$(PROJ_SRC_ROOT)/include \
+ -I$(LLVM_OBJ_ROOT)/include \
+ -I$(LLVM_SRC_ROOT)/include \
+ -D_GNU_SOURCE -D__STDC_LIMIT_MACROS
Compile.C = $(CC) $(CPP.Flags) $(CompileCommonOpts) -c $(C.Flags)
LTCompile.C = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.C)
$(C.Flags) -c
Compile.CXX = $(CXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -c
LTCompile.CXX = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.CXX)
-BCCompile.CXX = $(LLVMGXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -c
+BCCompile.CXX = $(LLVMGXXWITHPATH) $(CPP.Flags) $(CompileCommonOpts) \
+ $(CXX.Flags) -c
Link = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
$(CompileCommonOpts) $(LD.Flags) $(Strip)
Relink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
$(CompileCommonOpts)
LTInstall = $(LIBTOOL) $(LibTool.Flags) --mode=install $(INSTALL)
-Burg = $(BURG) -I $(BUILD_SRC_DIR)
-TableGen = $(TBLGEN) -I $(BUILD_SRC_DIR)
+Burg = $(BURG) -I $(PROJ_SRC_DIR)
+TableGen = $(TBLGEN) -I $(PROJ_SRC_DIR)
Archive = $(AR) $(AR.Flags)
LArchive = $(LLVMToolDir)/llvm-ar rcsf
ifdef RANLIB
ObjectsBC := $(BaseNameSources:%=$(ObjDir)/%.bc)
else
ifndef SOURCES
- Sources := $(notdir $(wildcard $(BUILD_SRC_DIR)/*.cpp \
- $(BUILD_SRC_DIR)/*.cc $(BUILD_SRC_DIR)/*.c $(BUILD_SRC_DIR)/*.y \
- $(BUILD_SRC_DIR)/*.l))
+ Sources := $(notdir $(wildcard $(PROJ_SRC_DIR)/*.cpp \
+ $(PROJ_SRC_DIR)/*.cc $(PROJ_SRC_DIR)/*.c $(PROJ_SRC_DIR)/*.y \
+ $(PROJ_SRC_DIR)/*.l))
else
Sources := $(SOURCES)
endif
# in the file so they get built before dependencies
#---------------------------------------------------------
-$(bindir):
- $(Verb) $(MKDIR) $(bindir)
+$(PROJ_bindir):
+ $(Verb) $(MKDIR) $(PROJ_bindir)
-$(libdir):
- $(Verb) $(MKDIR) $(libdir)
+$(PROJ_libdir):
+ $(Verb) $(MKDIR) $(PROJ_libdir)
-$(includedir):
- $(Verb) $(MKDIR) $(includedir)
+$(PROJ_includedir):
+ $(Verb) $(MKDIR) $(PROJ_includedir)
-$(sysconfdir):
- $(Verb) $(MKDIR) $(sysconfdir)
+$(PROJ_etcdir):
+ $(Verb) $(MKDIR) $(PROJ_etcdir)
# To create other directories, as needed, and timestamp their creation
%/.dir:
$(Verb) for dir in $(DIRS); do \
if [ ! -f $$dir/Makefile ]; then \
$(MKDIR) $$dir; \
- $(CP) $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ $(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
($(MAKE) -C $$dir $@ ) || exit 1; \
$(Verb) for dir in $(EXPERIMENTAL_DIRS); do \
if [ ! -f $$dir/Makefile ]; then \
$(MKDIR) $$dir; \
- $(CP) $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ $(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
($(MAKE) -C $$dir $@ ) || exit 0; \
$(ParallelTargets) :
$(Verb) if [ ! -f $(@D)/Makefile ]; then \
$(MKDIR) $(@D); \
- $(CP) $(BUILD_SRC_DIR)/$(@D)/Makefile $(@D)/Makefile; \
+ $(CP) $(PROJ_SRC_DIR)/$(@D)/Makefile $(@D)/Makefile; \
fi; \
if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
$(MAKE) -C $(@D) $(subst $(@D)/.make,,$@) ; \
$(RecursiveTargets)::
$(Verb) for dir in $(OPTIONAL_DIRS); do \
- if [ -d $(BUILD_SRC_DIR)/$$dir ]; then\
+ if [ -d $(PROJ_SRC_DIR)/$$dir ]; then\
if [ ! -f $$dir/Makefile ]; then \
$(MKDIR) $$dir; \
- $(CP) $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ $(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
($(MAKE) -C$$dir $@ ) || exit 1; \
#---------------------------------------------------------
ifdef CONFIG_FILES
-install-local:: $(sysconfdir) $(CONFIG_FILES)
- $(Echo) Installing Configuration Files To $(sysconfdir)
+install-local:: $(PROJ_etcdir) $(CONFIG_FILES)
+ $(Echo) Installing Configuration Files To $(PROJ_etcdir)
$(Verb)for file in $(CONFIG_FILES); do \
- if test -f $(BUILD_OBJ_DIR)/$${file} ; then \
- $(INSTALL) $(BUILD_OBJ_DIR)/$${file} $(sysconfdir) ; \
- elif test -f $(BUILD_SRC_DIR)/$${file} ; then \
- $(INSTALL) $(BUILD_SRC_DIR)/$${file} $(sysconfdir) ; \
+ if test -f $(PROJ_OBJ_DIR)/$${file} ; then \
+ $(INSTALL) $(PROJ_OBJ_DIR)/$${file} $(PROJ_etcdir) ; \
+ elif test -f $(PROJ_SRC_DIR)/$${file} ; then \
+ $(INSTALL) $(PROJ_SRC_DIR)/$${file} $(PROJ_etcdir) ; \
else \
$(ECHO) Error: cannot find config file $${file}. ; \
fi \
done
uninstall-local::
- $(Echo) Uninstalling Configuration Files From $(sysconfdir)
+ $(Echo) Uninstalling Configuration Files From $(PROJ_etcdir)
$(Verb)for file in $(CONFIG_FILES); do \
- $(RM) -f $(sysconfdir)/$${file} ; \
+ $(RM) -f $(PROJ_etcdir)/$${file} ; \
done
endif
#---------------------------------------------------------
ifdef MODULE_NAME
+ifeq ($(strip $(LLVMGCC)),)
+$(warning Modules require llvm-gcc but no llvm-gcc is available)
+else
Module := $(LibDir)/$(MODULE_NAME).bc
LinkModule := $(LLVMGCCWITHPATH) -shared -nostdlib
ifdef EXPORTED_SYMBOL_FILE
-LinkMOdule += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
+LinkModule += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
endif
$(Module): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir $(GCCLD)
ifdef BYTECODE_DESTINATION
ModuleDestDir := $(BYTECODE_DESTINATION)
else
-ModuleDestDir := $(libdir)
+ModuleDestDir := $(PROJ_libdir)
endif
DestModule := $(ModuleDestDir)/$(MODULE_NAME).bc
-$(Verb) $(RM) -f $(DestModule)
endif
+endif
# if we're building a library ...
ifdef LIBRARYNAME
# Make sure there isn't any extranous whitespace on the LIBRARYNAME option
LIBRARYNAME := $(strip $(LIBRARYNAME))
+ifdef LOADABLE_MODULE
+LibName.LA := $(LibDir)/$(LIBRARYNAME).la
+else
LibName.LA := $(LibDir)/lib$(LIBRARYNAME).la
+endif
LibName.A := $(LibDir)/lib$(LIBRARYNAME).a
LibName.O := $(LibDir)/$(LIBRARYNAME).o
LibName.BCA:= $(LibDir)/lib$(LIBRARYNAME).bca
-$(Verb) $(RM) -f $(LibName.LA)
endif
-DestSharedLib = $(libdir)/lib$(LIBRARYNAME)$(SHLIBEXT)
+DestSharedLib = $(PROJ_libdir)/lib$(LIBRARYNAME)$(SHLIBEXT)
install-local:: $(DestSharedLib)
-$(DestSharedLib): $(libdir) $(LibName.LA)
+$(DestSharedLib): $(PROJ_libdir) $(LibName.LA)
$(Echo) Installing $(BuildMode) Shared Library $(DestSharedLib)
$(Verb) $(LTInstall) $(LibName.LA) $(DestSharedLib)
- $(Verb) $(LIBTOOL) --finish $(libdir)
+ $(Verb) $(LIBTOOL) --finish $(PROJ_libdir)
uninstall-local::
$(Echo) Uninstalling $(BuildMode) Shared Library $(DestSharedLib)
- -$(Verb) $(RM) -f $(libdir)/lib$(LIBRARYNAME).*
+ -$(Verb) $(RM) -f $(PROJ_libdir)/lib$(LIBRARYNAME).*
endif
# targets for building them.
#---------------------------------------------------------
ifdef BYTECODE_LIBRARY
+ifeq ($(strip $(LLVMGCC)),)
+$(warning Bytecode libraries require llvm-gcc which could not be found)
+else
# make the C and C++ compilers strip debug info out of bytecode libraries.
BCCompile.C += -Wa,-strip-debug
ifdef BYTECODE_DESTINATION
BytecodeDestDir := $(BYTECODE_DESTINATION)
else
-BytecodeDestDir := $(libdir)
+BytecodeDestDir := $(PROJ_libdir)
endif
DestBytecodeLib = $(BytecodeDestDir)/lib$(LIBRARYNAME).a
-$(Verb) $(RM) -f $(DestBytecodeLib)
endif
+endif
#---------------------------------------------------------
# ReLinked Library Targets:
-$(Verb) $(RM) -f $(LibName.O)
endif
-DestRelinkedLib = $(libdir)/$(LIBRARYNAME).o
+DestRelinkedLib = $(PROJ_libdir)/$(LIBRARYNAME).o
install-local:: $(DestRelinkedLib)
-$(DestRelinkedLib): $(libdir) $(LibName.O)
+$(DestRelinkedLib): $(PROJ_libdir) $(LibName.O)
$(Echo) Installing $(BuildMode) Object Library $(DestRelinkedLib)
$(Verb) $(LTInstall) $(LibName.O) $(DestRelinkedLib)
-$(Verb) $(RM) -f $(LibName.A)
endif
-DestArchiveLib := $(libdir)/lib$(LIBRARYNAME).a
+DestArchiveLib := $(PROJ_libdir)/lib$(LIBRARYNAME).a
install-local:: $(DestArchiveLib)
-$(DestArchiveLib): $(libdir) $(LibName.A)
+$(DestArchiveLib): $(PROJ_libdir) $(LibName.A)
$(Echo) Installing $(BuildMode) Archive Library $(DestArchiveLib)
- $(Verb) $(MKDIR) $(libdir)
+ $(Verb) $(MKDIR) $(PROJ_libdir)
$(Verb) $(LTInstall) $(LibName.A) $(DestArchiveLib)
uninstall-local::
# What the X86 JIT requires
ifdef ENABLE_X86_JIT
- JIT_LIBS += LLVMX86
+ JIT_LIBS += LLVMX86 LLVMSelectionDAG
endif
# You can enable the SparcV9 JIT on a non-SparcV9 host by setting the flag
$(ToolBuildPath): $(ObjectsO) $(ProjLibsPaths) $(LLVMLibsPaths)
$(Echo) Linking $(BuildMode) executable $(TOOLNAME) $(StripWarnMsg)
$(Verb) $(Link) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(ProjLibsOptions) \
- $(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB)
+ $(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB) $(LIBS)
$(Echo) ======= Finished Linking $(BuildMode) Executable $(TOOLNAME) $(StripWarnMsg)
-DestTool = $(bindir)/$(TOOLNAME)
+DestTool = $(PROJ_bindir)/$(TOOLNAME)
install-local:: $(DestTool)
-$(DestTool): $(bindir) $(ToolBuildPath)
+$(DestTool): $(PROJ_bindir) $(ToolBuildPath)
$(Echo) Installing $(BuildMode) $(DestTool)
$(Verb) $(INSTALL) $(ToolBuildPath) $(DestTool)
then $(MV) -f "$(ObjDir)/$*.LACXXd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.LACXXd"; exit 1; fi
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build (PIC)"
+ $(Verb) if $(LTCompile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACXXd $< -o $@ ; \
+ then $(MV) -f "$(ObjDir)/$*.LACXXd" "$(ObjDir)/$*.d"; \
+ else $(RM) -f "$(ObjDir)/$*.LACXXd"; exit 1; fi
+
$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.c for $(BuildMode) build (PIC)"
$(Verb) if $(LTCompile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACd $< -o $@ ; \
then $(MV) -f "$(ObjDir)/$*.CXXd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.CXXd"; exit 1; fi
+$(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build"
+ $(Verb) if $(Compile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.CXXd $< -o $@ ; \
+ then $(MV) -f "$(ObjDir)/$*.CXXd" "$(ObjDir)/$*.d"; \
+ else $(RM) -f "$(ObjDir)/$*.CXXd"; exit 1; fi
+
$(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.c for $(BuildMode) build"
$(Verb) if $(Compile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.Cd $< -o $@ ; \
endif
#---------------------------------------------------------
-# Create .bc files in the ObjDir directory from .cpp and .c files...
+# Create .bc files in the ObjDir directory from .cpp .cc and .c files...
#---------------------------------------------------------
$(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
$(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)"
then $(MV) -f "$(ObjDir)/$*.BCCXXd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.BCCXXd"; exit 1; fi
+$(ObjDir)/%.bc: %.cc $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build (bytecode)"
+ $(Verb) if $(BCCompile.CXX) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCXXd" $< -o $@ ; \
+ then $(MV) -f "$(ObjDir)/$*.BCCXXd" "$(ObjDir)/$*.d"; \
+ else $(RM) -f "$(ObjDir)/$*.BCCXXd"; exit 1; fi
+
$(ObjDir)/%.bc: %.c $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
$(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)"
$(Verb) if $(BCCompile.C) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCd" $< -o $@ ; \
$(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)"
$(LTCompile.CXX) $< -o $@
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build (PIC)"
+ $(LTCompile.CXX) $< -o $@
+
$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.c for $(BuildMode) build (PIC)"
$(LTCompile.C) $< -o $@
$(Echo) "Compiling $*.cpp for $(BuildMode) build"
$(Compile.CXX) $< -o $@
+$(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build"
+ $(Compile.CXX) $< -o $@
+
$(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.c for $(BuildMode) build"
$(Compile.C) $< -o $@
$(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)"
$(BCCompile.CXX) $< -o $@
+$(ObjDir)/%.bc: %.cc $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build (bytecode)"
+ $(BCCompile.CXX) $< -o $@
+
$(ObjDir)/%.bc: %.c $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
$(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)"
$(BCCompile.C) $< -o $@
ifdef TARGET
-TDFiles := $(strip $(wildcard $(BUILD_SRC_DIR)/*.td) $(LLVM_SRC_ROOT)/lib/Target/Target.td)
+TDFiles := $(strip $(wildcard $(PROJ_SRC_DIR)/*.td) $(LLVM_SRC_ROOT)/lib/Target/Target.td)
INCFiles := $(filter %.inc,$(BUILT_SOURCES))
INCTMPFiles := $(INCFiles:%=$(ObjDir)/%.tmp)
.PRECIOUS: $(INCTMPFiles) $(INCFiles)
# which they can be "generated." This allows make to ignore them and
# reproduce the dependency lists.
%.h:: ;
+%.hpp:: ;
# Define clean-local to clean the current directory. Note that this uses a
# very conservative approach ensuring that empty variables do not cause
tags:: TAGS CTAGS
TAGS:
- find $(BUILD_SRC_ROOT)/include $(BUILD_SRC_ROOT)/lib \
- $(BUILD_SRC_ROOT)/tools $(BUILD_SRC_ROOT)/examples \
- $(BUILD_OBJ_ROOT)/include $(BUILD_OBJ_ROOT)/lib \
- $(BUILD_OBJ_ROOT)/tools $(BUILD_OBJ_ROOT)/examples \
+ find $(PROJ_SRC_ROOT)/include $(PROJ_SRC_ROOT)/lib \
+ $(PROJ_SRC_ROOT)/tools $(PROJ_SRC_ROOT)/examples \
+ $(PROJ_OBJ_ROOT)/include $(PROJ_OBJ_ROOT)/lib \
+ $(PROJ_OBJ_ROOT)/tools $(PROJ_OBJ_ROOT)/examples \
-name '*.cpp' -o -name '*.h' | \
$(ETAGS) $(ETAGSFLAGS) -
CTAGS:
- find $(BUILD_SRC_ROOT)/include $(BUILD_SRC_ROOT)/lib \
- $(BUILD_SRC_ROOT)/tools $(BUILD_SRC_ROOT)/examples \
- $(BUILD_OBJ_ROOT)/include $(BUILD_OBJ_ROOT)/lib \
- $(BUILD_OBJ_ROOT)/tools $(BUILD_OBJ_ROOT)/examples \
+ find $(PROJ_SRC_ROOT)/include $(PROJ_SRC_ROOT)/lib \
+ $(PROJ_SRC_ROOT)/tools $(PROJ_SRC_ROOT)/examples \
+ $(PROJ_OBJ_ROOT)/include $(PROJ_OBJ_ROOT)/lib \
+ $(PROJ_OBJ_ROOT)/tools $(PROJ_OBJ_ROOT)/examples \
\( -name '*.cpp' -o -name '*.h' \) -print | \
- ctags -ImtT -o $(BUILD_OBJ_ROOT)/CTAGS -L -
+ ctags -ImtT -o $(PROJ_OBJ_ROOT)/CTAGS -L -
###############################################################################
# Get the list of dependency files
DependFiles := $(basename $(filter %.cpp %.c %.cc, $(Sources)))
-DependFiles := $(patsubst %,$(BUILD_OBJ_DIR)/$(BuildMode)/%.d,$(DependFiles))
+DependFiles := $(patsubst %,$(PROJ_OBJ_DIR)/$(BuildMode)/%.d,$(DependFiles))
-include /dev/null $(DependFiles)
###############################################################################
check::
- $(Verb) if test -d "$(BUILD_OBJ_ROOT)/test" ; then \
- if test -f "$(BUILD_OBJ_ROOT)/test/Makefile" ; then \
+ $(Verb) if test -d "$(PROJ_OBJ_ROOT)/test" ; then \
+ if test -f "$(PROJ_OBJ_ROOT)/test/Makefile" ; then \
$(EchoCmd) Running test suite ; \
- $(MAKE) -C $(BUILD_OBJ_ROOT)/test check-local \
+ $(MAKE) -C $(PROJ_OBJ_ROOT)/test check-local \
TESTSUITE=$(TESTSUITE) ; \
else \
$(EchoCmd) No Makefile in test directory ; \
#------------------------------------------------------------------------
# Define distribution related variables
#------------------------------------------------------------------------
-DistName := $(LLVM_TARBALL_NAME)
-DistDir := $(BUILD_OBJ_ROOT)/$(DistName)
-TopDistDir := $(BUILD_OBJ_ROOT)/$(DistName)
-DistTarGZip := $(BUILD_OBJ_ROOT)/$(DistName).tar.gz
-DistZip := $(BUILD_OBJ_ROOT)/$(DistName).zip
-DistTarBZ2 := $(BUILD_OBJ_ROOT)/$(DistName).tar.bz2
+DistName := $(PROJECT_NAME)-$(PROJ_VERSION)
+DistDir := $(PROJ_OBJ_ROOT)/$(DistName)
+TopDistDir := $(PROJ_OBJ_ROOT)/$(DistName)
+DistTarGZip := $(PROJ_OBJ_ROOT)/$(DistName).tar.gz
+DistZip := $(PROJ_OBJ_ROOT)/$(DistName).zip
+DistTarBZ2 := $(PROJ_OBJ_ROOT)/$(DistName).tar.bz2
DistAlways := CREDITS.TXT LICENSE.TXT README.txt README AUTHORS COPYING \
ChangeLog INSTALL NEWS Makefile Makefile.common Makefile.rules \
Makefile.config.in configure autoconf
DistOther := $(notdir $(wildcard \
- $(BUILD_SRC_DIR)/*.h \
- $(BUILD_SRC_DIR)/*.td \
- $(BUILD_SRC_DIR)/*.def \
- $(BUILD_SRC_DIR)/*.ll \
- $(BUILD_SRC_DIR)/*.in))
+ $(PROJ_SRC_DIR)/*.h \
+ $(PROJ_SRC_DIR)/*.td \
+ $(PROJ_SRC_DIR)/*.def \
+ $(PROJ_SRC_DIR)/*.ll \
+ $(PROJ_SRC_DIR)/*.in))
DistSubDirs := $(SubDirs)
DistSources = $(Sources) $(EXTRA_DIST)
DistFiles = $(DistAlways) $(DistSources) $(DistOther)
#------------------------------------------------------------------------
# We MUST build distribution with OBJ_DIR != SRC_DIR
#------------------------------------------------------------------------
-ifeq ($(BUILD_SRC_DIR),$(BUILD_OBJ_DIR))
+ifeq ($(PROJ_SRC_DIR),$(PROJ_OBJ_DIR))
dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip ::
$(Echo) ERROR: Target $@ only available with OBJ_DIR != SRC_DIR
else
-#------------------------------------------------------------------------
-# Prevent catastrophic remove
-#------------------------------------------------------------------------
-ifeq ($(LLVM_TARBALL_NAME),)
-$(error LLVM_TARBALL_NAME is empty. Please rerun configure)
-endif
-
#------------------------------------------------------------------------
# Prevent attempt to run dist targets from anywhere but the top level
#------------------------------------------------------------------------
ifneq ($(LEVEL),.)
-
dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip ::
- $(Echo) ERROR: You must run $@ from $(BUILD_OBJ_ROOT)
-
+ $(Echo) ERROR: You must run $@ from $(PROJ_OBJ_ROOT)
else
#------------------------------------------------------------------------
$(DistTarGZip) : $(TopDistDir)/.makedistdir
$(Echo) Packing gzipped distribution tar file.
- $(Verb) cd $(BUILD_OBJ_ROOT) ; $(TAR) chf - "$(DistName)" | \
+ $(Verb) cd $(PROJ_OBJ_ROOT) ; $(TAR) chf - "$(DistName)" | \
$(GZIP) -c > "$(DistTarGZip)"
dist-bzip2:: $(DistTarBZ2)
$(DistTarBZ2) : $(TopDistDir)/.makedistdir
$(Echo) Packing bzipped distribution tar file.
- $(Verb) cd $(BUILD_OBJ_ROOT) ; $(TAR) chf - $(DistName) | \
+ $(Verb) cd $(PROJ_OBJ_ROOT) ; $(TAR) chf - $(DistName) | \
$(BZIP2) -c >$(DistTarBZ2)
dist-zip:: $(DistZip)
$(DistZip) : $(TopDistDir)/.makedistdir
$(Echo) Packing zipped distribution file.
$(Verb) rm -f $(DistZip)
- $(Verb) cd $(BUILD_OBJ_ROOT) ; $(ZIP) -rq $(DistZip) $(DistName)
+ $(Verb) cd $(PROJ_OBJ_ROOT) ; $(ZIP) -rq $(DistZip) $(DistName)
dist :: $(DistTarGZip) $(DistTarBZ2) $(DistZip)
$(Echo) ===== DISTRIBUTION PACKAGING SUCESSFUL =====
-DistCheckDir := $(LLVM_OBJ_ROOT)/_distcheckdir
+DistCheckDir := $(PROJ_OBJ_ROOT)/_distcheckdir
dist-check:: $(DistTarGZip)
$(Echo) Checking distribution tar file.
fi
$(Echo) Building Distribution Directory $(DistDir)
$(Verb) $(MKDIR) $(DistDir)
- $(Verb) srcdirstrip=`echo "$(BUILD_SRC_DIR)" | sed 's|.|.|g'`; \
- srcrootstrip=`echo "$(BUILD_SRC_ROOT)" | sed 's|.|.|g'`; \
+ $(Verb) srcdirstrip=`echo "$(PROJ_SRC_DIR)" | sed 's|.|.|g'`; \
+ srcrootstrip=`echo "$(PROJ_SRC_ROOT)" | sed 's|.|.|g'`; \
for file in $(DistFiles) ; do \
case "$$file" in \
- $(BUILD_SRC_DIR)/*) \
+ $(PROJ_SRC_DIR)/*) \
file=`echo "$$file" | sed "s#^$$srcdirstrip/##"` \
;; \
- $(BUILD_SRC_ROOT)/*) \
+ $(PROJ_SRC_ROOT)/*) \
file=`echo "$$file" | \
sed "s#^$$srcrootstrip/##"` \
;; \
esac; \
- if test -f "$(BUILD_SRC_DIR)/$$file" || \
- test -d "$(BUILD_SRC_DIR)/$$file" ; then \
- from_dir="$(BUILD_SRC_DIR)" ; \
+ if test -f "$(PROJ_SRC_DIR)/$$file" || \
+ test -d "$(PROJ_SRC_DIR)/$$file" ; then \
+ from_dir="$(PROJ_SRC_DIR)" ; \
elif test -f "$$file" || test -d "$$file" ; then \
from_dir=. ; \
fi ; \
$(MKDIR) "$$to_dir/$$mid_dir" || exit 1; \
fi ; \
if test -d "$$from_dir/$$file"; then \
- if test -d "$(BUILD_SRC_DIR)/$$file" && \
- test "$$from_dir" != "$(BUILD_SRC_DIR)" ; then \
- $(CP) -pR "$(BUILD_SRC_DIR)/$$file" "$$to_dir" || exit 1; \
+ if test -d "$(PROJ_SRC_DIR)/$$file" && \
+ test "$$from_dir" != "$(PROJ_SRC_DIR)" ; then \
+ $(CP) -pR "$(PROJ_SRC_DIR)/$$file" "$$to_dir" || exit 1; \
fi; \
$(CP) -pR $$from_dir/$$file $$to_dir || exit 1; \
elif test -f "$$from_dir/$$file" ; then \
#------------------------------------------------------------------------
install-local::
$(Echo) Installing include files
- $(Verb) $(MKDIR) $(includedir)
- $(Verb) if [ -d "$(BUILD_SRC_ROOT)/include" ] ; then \
- cd $(BUILD_SRC_ROOT)/include && \
- find . -path '*/Internal' -prune -o '(' -type f \
- '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' ')' \
- -print ')' | grep -v CVS | pax -rwdvpe $(includedir) ; \
+ $(Verb) $(MKDIR) $(PROJ_includedir)
+ $(Verb) if [ -d "$(PROJ_SRC_ROOT)/include" ] ; then \
+ cd $(PROJ_SRC_ROOT)/include && \
+ for hdr in `find . -type f '!' '(' -name '*~' -o -name '.cvsignore' \
+ -o -name '.#*' -o -name '*.in' ')' -print | grep -v CVS ` ; do \
+ $(INSTALL) $$hdr $(PROJ_includedir) ; \
+ done ; \
+ fi
+ $(Verb) if [ -d "$(PROJ_OBJ_ROOT)/include" ] ; then \
+ cd $(PROJ_OBJ_ROOT)/include && \
+ for hdr in `find . -type f -print` ; do \
+ $(INSTALL) $$hdr $(PROJ_includedir) ; \
+ done ; \
fi
uninstall-local::
$(Echo) Uninstalling include files
- $(Verb) if [ -d "$(BUILD_SRC_ROOT)/include" ] ; then \
- cd $(BUILD_SRC_ROOT)/include && \
+ $(Verb) if [ -d "$(PROJ_SRC_ROOT)/include" ] ; then \
+ cd $(PROJ_SRC_ROOT)/include && \
$(RM) -f `find . -path '*/Internal' -prune -o '(' -type f \
- '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' ')' \
- -print ')' | grep -v CVS | sed 's#^#$(includedir)/#'` ; \
- fi
+ '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' -o -name '*.in' ')' \
+ -print ')' | grep -v CVS | sed 's#^#$(PROJ_includedir)/#'` ; \
+ cd $(PROJ_SRC_ROOT)/include && \
+ $(RM) -f `find . -path '*/Internal' -prune -o '(' -type f -name '*.in' -print ')' \
+ | sed 's#\.in$$##;s#^#$(PROJ_includedir)/#'` ; \
+ fi
endif
# Print out the directories used for building
#------------------------------------------------------------------------
printvars::
- $(Echo) "BuildMode : " '$(BuildMode)'
- $(Echo) "BUILD_SRC_ROOT : " '$(BUILD_SRC_ROOT)'
- $(Echo) "BUILD_SRC_DIR : " '$(BUILD_SRC_DIR)'
- $(Echo) "BUILD_OBJ_ROOT : " '$(BUILD_OBJ_ROOT)'
- $(Echo) "BUILD_OBJ_DIR : " '$(BUILD_OBJ_DIR)'
- $(Echo) "LLVM_SRC_ROOT : " '$(LLVM_SRC_ROOT)'
- $(Echo) "LLVM_OBJ_ROOT : " '$(LLVM_OBJ_ROOT)'
- $(Echo) "libdir : " '$(libdir)'
- $(Echo) "bindir : " '$(bindir)'
- $(Echo) "sysconfdir : " '$(sysconfdir)'
- $(Echo) "UserTargets : " '$(UserTargets)'
- $(Echo) "ObjMakefiles : " '$(ObjMakefiles)'
- $(Echo) "SrcMakefiles : " '$(SrcMakefiles)'
- $(Echo) "ObjDir : " '$(ObjDir)'
- $(Echo) "LibDir : " '$(LibDir)'
- $(Echo) "ToolDir : " '$(ToolDir)'
- $(Echo) "ExmplDir : " '$(ExmplDir)'
- $(Echo) "Sources : " '$(Sources)'
- $(Echo) "TDFiles : " '$(TDFiles)'
- $(Echo) "INCFiles : " '$(INCFiles)'
- $(Echo) "INCTMPFiles : " '$(INCTMPFiles)'
- $(Echo) "Compile.CXX : " '$(Compile.CXX)'
- $(Echo) "Compile.C : " '$(Compile.C)'
- $(Echo) "Archive : " '$(Archive)'
- $(Echo) "YaccFiles : " '$(YaccFiles)'
- $(Echo) "LexFiles : " '$(LexFiles)'
- $(Echo) "Module : " '$(Module)'
+ $(Echo) "BuildMode : " '$(BuildMode)'
+ $(Echo) "PROJ_SRC_ROOT: " '$(PROJ_SRC_ROOT)'
+ $(Echo) "PROJ_SRC_DIR : " '$(PROJ_SRC_DIR)'
+ $(Echo) "PROJ_OBJ_ROOT: " '$(PROJ_OBJ_ROOT)'
+ $(Echo) "PROJ_OBJ_DIR : " '$(PROJ_OBJ_DIR)'
+ $(Echo) "LLVM_SRC_ROOT: " '$(LLVM_SRC_ROOT)'
+ $(Echo) "LLVM_OBJ_ROOT: " '$(LLVM_OBJ_ROOT)'
+ $(Echo) "PROJ_prefix : " '$(PROJ_prefix)'
+ $(Echo) "PROJ_bindir : " '$(PROJ_bindir)'
+ $(Echo) "PROJ_libdir : " '$(PROJ_libdir)'
+ $(Echo) "PROJ_etcdir : " '$(PROJ_etcdir)'
+ $(Echo) "UserTargets : " '$(UserTargets)'
+ $(Echo) "ObjMakefiles : " '$(ObjMakefiles)'
+ $(Echo) "SrcMakefiles : " '$(SrcMakefiles)'
+ $(Echo) "ObjDir : " '$(ObjDir)'
+ $(Echo) "LibDir : " '$(LibDir)'
+ $(Echo) "ToolDir : " '$(ToolDir)'
+ $(Echo) "ExmplDir : " '$(ExmplDir)'
+ $(Echo) "Sources : " '$(Sources)'
+ $(Echo) "TDFiles : " '$(TDFiles)'
+ $(Echo) "INCFiles : " '$(INCFiles)'
+ $(Echo) "INCTMPFiles : " '$(INCTMPFiles)'
+ $(Echo) "Preconditions: " '$(Preconditions)'
+ $(Echo) "Compile.CXX : " '$(Compile.CXX)'
+ $(Echo) "Compile.C : " '$(Compile.C)'
+ $(Echo) "Archive : " '$(Archive)'
+ $(Echo) "YaccFiles : " '$(YaccFiles)'
+ $(Echo) "LexFiles : " '$(LexFiles)'
+ $(Echo) "Module : " '$(Module)'
projects / oota-llvm.git / blobdiff