#--------------------------------------------------------------------
# Define the various target sets
#--------------------------------------------------------------------
-RecursiveTargets := all clean clean-all check install uninstall
+RecursiveTargets := all clean clean-all install uninstall install-bytecode
LocalTargets := all-local clean-local clean-all-local check-local \
- install-local printvars uninstall-local
-TopLevelTargets := dist dist-check dist-clean tags dist-gzip dist-bzip2 \
+ install-local printvars uninstall-local \
+ install-bytecode-local
+TopLevelTargets := check dist dist-check dist-clean tags dist-gzip dist-bzip2 \
dist-zip
UserTargets := $(RecursiveTargets) $(LocalTargets) $(TopLevelTargets)
InternalTargets := preconditions distdir dist-hook
#--------------------------------------------------------------------
# Set the VPATH so that we can find source files.
#--------------------------------------------------------------------
-VPATH=$(BUILD_SRC_DIR)
+VPATH=$(PROJ_SRC_DIR)
#--------------------------------------------------------------------
# Reset the list of suffixes we know how to build
#--------------------------------------------------------------------
.SUFFIXES:
-.SUFFIXES: .c .cpp .h .hpp .y .l .lo .o .a .bc .td .ps .dot
+.SUFFIXES: .c .cpp .cc .h .hpp .y .l .lo .o .a .bc .td .ps .dot
.SUFFIXES: $(SHLIBEXT) $(SUFFIXES)
#--------------------------------------------------------------------
# PRECONDITIONS: that which must be built/checked first
################################################################################
-SrcMakefiles := $(filter %Makefile %Makefile.tests %Makefile.JIT,\
- $(wildcard $(BUILD_SRC_DIR)/Makefile*))
-ObjMakefiles := $(subst $(BUILD_SRC_DIR),$(BUILD_OBJ_DIR),$(SrcMakefiles))
-ConfigureScript := $(LLVM_SRC_ROOT)/configure
-ConfigStatusScript := $(LLVM_OBJ_ROOT)/config.status
-MakefileConfigIn := $(LLVM_SRC_ROOT)/Makefile.config.in
-MakefileConfig := $(LLVM_OBJ_ROOT)/Makefile.config
-PreConditions := $(ConfigStatusScript) $(MakefileConfig) $(ObjMakefiles)
+SrcMakefiles := $(filter %Makefile %Makefile.tests,\
+ $(wildcard $(PROJ_SRC_DIR)/Makefile*))
+ObjMakefiles := $(subst $(PROJ_SRC_DIR),$(PROJ_OBJ_DIR),$(SrcMakefiles))
+ConfigureScript := $(PROJ_SRC_ROOT)/configure
+ConfigStatusScript := $(PROJ_OBJ_ROOT)/config.status
+MakefileConfigIn := $(strip $(wildcard $(PROJ_SRC_ROOT)/Makefile.config.in))
+MakefileCommonIn := $(strip $(wildcard $(PROJ_SRC_ROOT)/Makefile.common.in))
+MakefileConfig := $(PROJ_OBJ_ROOT)/Makefile.config
+MakefileCommon := $(PROJ_OBJ_ROOT)/Makefile.common
+PreConditions := $(ConfigStatusScript) $(ObjMakefiles)
+ifneq ($(MakefileCommonIn),)
+PreConditions += $(MakefileCommon)
+endif
+ifneq ($(MakefileConfigIn),)
+PreConditions += $(MakefileConfig)
+endif
preconditions : $(PreConditions)
#------------------------------------------------------------------------
# Make sure the BUILT_SOURCES are built first
#------------------------------------------------------------------------
-$(filter-out clean clean-local,UserTargets):: $(BUILT_SOURCES)
+$(filter-out clean clean-local,$(UserTargets)):: $(BUILT_SOURCES)
clean-local::
ifneq ($(strip $(BUILT_SOURCES)),)
-$(Verb) $(RM) -f $(BUILT_SOURCES)
endif
+ifneq ($(PROJ_OBJ_ROOT),$(PROJ_SRC_ROOT))
+spotless:
+ $(Verb) if test -x config.status ; then \
+ $(EchoCmd) Wiping out $(PROJ_OBJ_ROOT) ; \
+ $(MKDIR) .spotless.save ; \
+ $(MV) config.status .spotless.save ; \
+ $(MV) mklib .spotless.save ; \
+ $(MV) projects .spotless.save ; \
+ $(RM) -rf * ; \
+ $(MV) .spotless.save/config.status . ; \
+ $(MV) .spotless.save/mklib . ; \
+ $(MV) .spotless.save/projects . ; \
+ $(RM) -rf .spotless.save ; \
+ $(EchoCmd) Rebuilding configuration of $(PROJ_OBJ_ROOT) ; \
+ $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
+ $(ConfigStatusScript) ; \
+ else \
+ $(EchoCmd) "make spotless" can only be run from $(PROJ_OBJ_ROOT); \
+ fi
+endif
+
$(BUILT_SOURCES) : $(ObjMakefiles)
#------------------------------------------------------------------------
# Make sure we're not using a stale configuration
#------------------------------------------------------------------------
+reconfigure:
+ $(Echo) Reconfiguring $(PROJ_OBJ_ROOT)
+ $(Verb) cd $(PROJ_OBJ_ROOT) && \
+ if test -w $(PROJ_OBJ_ROOT)/config.cache ; then \
+ $(RM) $(PROJ_OBJ_ROOT)/config.cache ; \
+ fi ; \
+ $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
+ $(ConfigStatusScript)
+
.PRECIOUS: $(ConfigStatusScript)
$(ConfigStatusScript): $(ConfigureScript)
$(Echo) Reconfiguring with $<
- $(Verb) $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS)
- $(Verb) $(ConfigStatusScript)
+ $(Verb) cd $(PROJ_OBJ_ROOT) && \
+ if test -w $(PROJ_OBJ_ROOT)/config.cache ; then \
+ $(RM) $(PROJ_OBJ_ROOT)/config.cache ; \
+ fi ; \
+ $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
+ $(ConfigStatusScript)
#------------------------------------------------------------------------
# Make sure the configuration makefile is up to date
#------------------------------------------------------------------------
+ifneq ($(MakefileConfigIn),)
$(MakefileConfig): $(MakefileConfigIn) $(ConfigStatusScript)
$(Echo) Regenerating $@
- $(Verb) cd $(LLVM_OBJ_ROOT) ; $(ConfigStatusScript) Makefile.config
+ $(Verb) cd $(PROJ_OBJ_ROOT) ; $(ConfigStatusScript) Makefile.config
+endif
+
+ifneq ($(MakefileCommonIn),)
+$(MakefileCommon): $(MakefileCommonIn) $(ConfigStatusScript)
+ $(Echo) Regenerating $@
+ $(Verb) cd $(PROJ_OBJ_ROOT) ; $(ConfigStatusScript) Makefile.common
+endif
#------------------------------------------------------------------------
# If the Makefile in the source tree has been updated, copy it over into the
# build tree. But, only do this if the source and object makefiles differ
#------------------------------------------------------------------------
-ifneq ($(BUILD_OBJ_DIR),$(BUILD_SRC_DIR))
+ifneq ($(PROJ_OBJ_DIR),$(PROJ_SRC_DIR))
-Makefile: $(BUILD_SRC_DIR)/Makefile
+Makefile: $(PROJ_SRC_DIR)/Makefile
$(Echo) "Updating Makefile"
$(Verb) $(MKDIR) $(@D)
- $(Verb) cp -f $< $@
+ $(Verb) $(CP) -f $< $@
# Copy the Makefile.* files unless we're in the root directory which avoids
# the copying of Makefile.config.in or other things that should be explicitly
# taken care of.
-$(BUILD_OBJ_DIR)/Makefile% : $(BUILD_SRC_DIR)/Makefile%
+$(PROJ_OBJ_DIR)/Makefile% : $(PROJ_SRC_DIR)/Makefile%
@case '$?' in \
*Makefile.rules) ;; \
*.in) ;; \
*) $(Echo) "Updating $(@F)" ; \
$(MKDIR) $(@D) ; \
- cp -f $< $@ ;; \
+ $(CP) -f $< $@ ;; \
esac
endif
$(UserTargets):: $(PreConditions)
all:: all-local
-check:: check-local
clean:: clean-local
clean-all:: clean-local clean-all-local
install:: install-local
uninstall:: uninstall-local
-check-local:: all-local
install-local:: all-local
+install-bytecode:: install-bytecode-local
###############################################################################
# VARIABLES: Set up various variables based on configuration data
# Variables derived from configuration we are building
#--------------------------------------------------------------------
+
ifdef ENABLE_PROFILING
BuildMode := Profile
CXX.Flags := -O3 -DNDEBUG -felide-constructors -finline-functions -pg
else
ifdef ENABLE_OPTIMIZED
BuildMode := Release
- CXX.Flags := -O3 -DNDEBUG -finline-functions -felide-constructors -fomit-frame-pointer
- C.Flags := -O3 -DNDEBUG -fomit-frame-pointer
+ # Don't use -fomit-frame-pointer on FreeBSD
+ ifneq ($(OS),FreeBSD)
+ OmitFramePointer := -fomit-frame-pointer
+ endif
+ CXX.Flags := -O3 -DNDEBUG -finline-functions -felide-constructors \
+ $(OmitFramePointer)
+ C.Flags := -O3 -DNDEBUG $(OmitFramePointer)
LD.Flags := -O3 -DNDEBUG
else
BuildMode := Debug
- CXX.Flags := -g -D_DEBUG
+ CXX.Flags := -g -D_DEBUG
C.Flags := -g -D_DEBUG
LD.Flags := -g -D_DEBUG
KEEP_SYMBOLS := 1
AR.Flags := cru
LibTool.Flags := --tag=CXX
+#Make Floating point ieee complient on alpha
+ifeq ($(ARCH),Alpha)
+ CXX.Flags += -mieee
+ CPP.Flags += -mieee
+endif
+
#--------------------------------------------------------------------
# Directory locations
#--------------------------------------------------------------------
-ObjDir := $(BUILD_OBJ_DIR)/$(BuildMode)
-LibDir := $(BUILD_OBJ_ROOT)/$(BuildMode)/lib
-ToolDir := $(BUILD_OBJ_ROOT)/$(BuildMode)/bin
-ExmplDir := $(BUILD_OBJ_ROOT)/$(BuildMode)/examples
+ObjDir := $(PROJ_OBJ_DIR)/$(BuildMode)
+LibDir := $(PROJ_OBJ_ROOT)/$(BuildMode)/lib
+ToolDir := $(PROJ_OBJ_ROOT)/$(BuildMode)/bin
+ExmplDir := $(PROJ_OBJ_ROOT)/$(BuildMode)/examples
LLVMLibDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/lib
LLVMToolDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/bin
-LExmplDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/examples
+LLVMExmplDir:= $(LLVM_OBJ_ROOT)/$(BuildMode)/examples
+CFERuntimeLibDir := $(LLVMGCCDIR)/lib
#--------------------------------------------------------------------
# Full Paths To Compiled Tools and Utilities
#--------------------------------------------------------------------
-EchoCmd := $(ECHO) llvm[$(MAKELEVEL)]:
-Echo := @$(EchoCmd)
+EchoCmd = $(ECHO) llvm[$(MAKELEVEL)]:
+Echo = @$(EchoCmd)
ifndef LIBTOOL
LIBTOOL := $(LLVM_OBJ_ROOT)/mklib
endif
ifndef TBLGEN
TBLGEN := $(LLVMToolDir)/tblgen$(EXEEXT)
endif
+ifndef GCCAS
+GCCAS := $(LLVMToolDir)/gccas$(EXEEXT)
+endif
ifndef GCCLD
GCCLD := $(LLVMToolDir)/gccld$(EXEEXT)
endif
-ifndef LLVMGCC
-LLVMGCC := PATH=$(LLVMToolDir):$(PATH) $(LLVMGCCDIR)/bin/gcc
+ifndef LDIS
+LLVMDIS := $(LLVMToolDir)/llvm-dis$(EXEEXT)
+endif
+ifndef LLI
+LLI := $(LLVMToolDir)/lli$(EXEEXT)
endif
-ifndef LLVMGXX
-LLVMGXX := PATH=$(LLVMToolDir):$(PATH) $(LLVMGCCDIR)/bin/g++
+ifndef LOPT
+LOPT := $(LLVMToolDir)/opt$(EXEEXT)
+endif
+ifndef LBUGPOINT
+LBUGPOINT := $(LLVMToolDir)/bugpoint$(EXEEXT)
endif
-# Need a better way to compute this.
-LLVMGCCLibDir := $(dir $(shell $(LLVMGCC) -print-file-name=libgcc.a))/
+LLVMGCCWITHPATH := PATH="$(LLVMToolDir):$(PATH)" $(LLVMGCC)
+LLVMGXXWITHPATH := PATH="$(LLVMToolDir):$(PATH)" $(LLVMGXX)
#--------------------------------------------------------------------
# Adjust to user's request
#--------------------------------------------------------------------
-# Adjust LIBTOOL flags for shared libraries, or not.
-ifndef SHARED_LIBRARY
- LibTool.Flags += --tag=disable-shared
-else
+# Adjust LD.Flags and Libtool.Flags depending on the kind of library that is
+# to be built. Note that if LOADABLE_MODULE is specified then the resulting
+# shared library can be opened with dlopen
+ifdef SHARED_LIBRARY
LD.Flags += -rpath $(LibDir)
+ ifdef LOADABLE_MODULE
+ LD.Flags += -module
+ endif
+else
+ LibTool.Flags += --tag=disable-shared
endif
ifdef TOOL_VERBOSE
C.Flags += -v
CXX.Flags += -v
LD.Flags += -v
- BCLinkLib.Flags += -v
VERBOSE := 1
endif
Verb := @
LibTool.Flags += --silent
AR.Flags += >/dev/null 2>/dev/null
- ConfigureScriptFLAGS += >$(BUILD_OBJ_DIR)/configure.out 2>&1
+ ConfigureScriptFLAGS += >$(PROJ_OBJ_DIR)/configure.out 2>&1
else
ConfigureScriptFLAGS :=
endif
CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused
-LD.Flags += -L$(LibDir) -L$(LLVMLibDir)
-CPP.Flags += -I$(BUILD_OBJ_DIR) \
- -I$(BUILD_SRC_DIR) \
- -I$(BUILD_SRC_ROOT)/include \
- -I$(BUILD_OBJ_ROOT)/include \
- -I$(LLVM_OBJ_ROOT)/include \
- -I$(LLVM_SRC_ROOT)/include \
- -D_GNU_SOURCE -D__STDC_LIMIT_MACROS
+LD.Flags += -L$(LibDir) -L$(LLVMLibDir)
+CPP.Flags += -I$(PROJ_OBJ_DIR) -I$(PROJ_SRC_DIR) \
+ -I$(PROJ_OBJ_ROOT)/include \
+ -I$(PROJ_SRC_ROOT)/include \
+ -I$(LLVM_OBJ_ROOT)/include \
+ -I$(LLVM_SRC_ROOT)/include \
+ -D_GNU_SOURCE -D__STDC_LIMIT_MACROS
Compile.C = $(CC) $(CPP.Flags) $(CompileCommonOpts) -c $(C.Flags)
LTCompile.C = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.C)
-BCCompile.C = $(LLVMGCC) $(CPP.Flags) $(CompileCommonOpts) $(C.Flags) -c
+BCCompile.C = $(LLVMGCCWITHPATH) $(CPP.Flags) $(CompileCommonOpts) \
+ $(C.Flags) -c
Compile.CXX = $(CXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -c
LTCompile.CXX = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.CXX)
-BCCompile.CXX = $(LLVMGXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -c
+BCCompile.CXX = $(LLVMGXXWITHPATH) $(CPP.Flags) $(CompileCommonOpts) \
+ $(CXX.Flags) -c
Link = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
$(CompileCommonOpts) $(LD.Flags) $(Strip)
Relink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
$(CompileCommonOpts)
-BCLinkLib = $(LLVMGCC) -shared -nostdlib $(BCLinkLib.Flags)
LTInstall = $(LIBTOOL) $(LibTool.Flags) --mode=install $(INSTALL)
-Burg = $(BURG) -I $(BUILD_SRC_DIR)
-TableGen = $(TBLGEN) -I $(BUILD_SRC_DIR)
+Burg = $(BURG) -I $(PROJ_SRC_DIR)
+TableGen = $(TBLGEN) -I $(PROJ_SRC_DIR)
Archive = $(AR) $(AR.Flags)
-LArchive = $(ToolDir)/llvm-ar rcsf
+LArchive = $(LLVMToolDir)/llvm-ar rcsf
ifdef RANLIB
Ranlib = $(RANLIB)
else
endif
#----------------------------------------------------------
-# Get the list of source files
+# Get the list of source files and compute object file
+# names from them.
#----------------------------------------------------------
-ifndef SOURCES
- Sources := $(notdir $(wildcard $(BUILD_SRC_DIR)/*.cpp \
- $(BUILD_SRC_DIR)/*.cc $(BUILD_SRC_DIR)/*.c $(BUILD_SRC_DIR)/*.y \
- $(BUILD_SRC_DIR)/*.l))
+ifdef FAKE_SOURCES
+ Sources :=
+ FakeSources := $(FAKE_SOURCES)
+ ifdef BUILT_SOURCES
+ FakeSources += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES))
+ endif
+ BaseNameSources := $(sort $(basename $(FakeSources)))
+ ObjectsO := $(BaseNameSources:%=$(ObjDir)/%.o)
+ ObjectsLO := $(BaseNameSources:%=$(ObjDir)/%.lo)
+ ObjectsBC := $(BaseNameSources:%=$(ObjDir)/%.bc)
else
- Sources := $(SOURCES)
-endif
+ ifndef SOURCES
+ Sources := $(notdir $(wildcard $(PROJ_SRC_DIR)/*.cpp \
+ $(PROJ_SRC_DIR)/*.cc $(PROJ_SRC_DIR)/*.c $(PROJ_SRC_DIR)/*.y \
+ $(PROJ_SRC_DIR)/*.l))
+ else
+ Sources := $(SOURCES)
+ endif
-ifdef BUILT_SOURCES
-Sources += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES))
-endif
+ ifdef BUILT_SOURCES
+ Sources += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES))
+ endif
-#----------------------------------------------------------
-# Types of objects that can be built from sources
-#----------------------------------------------------------
-BaseNameSources := $(sort $(basename $(Sources)))
-ObjectsO := $(BaseNameSources:%=$(ObjDir)/%.o)
-ObjectsLO := $(BaseNameSources:%=$(ObjDir)/%.lo)
-ObjectsBC := $(BaseNameSources:%=$(ObjDir)/%.bc)
+ BaseNameSources := $(sort $(basename $(Sources)))
+ ObjectsO := $(BaseNameSources:%=$(ObjDir)/%.o)
+ ObjectsLO := $(BaseNameSources:%=$(ObjDir)/%.lo)
+ ObjectsBC := $(BaseNameSources:%=$(ObjDir)/%.bc)
+endif
###############################################################################
# DIRECTORIES: Handle recursive descent of directory structure
# in the file so they get built before dependencies
#---------------------------------------------------------
-$(bindir):
- $(Verb) $(MKDIR) $(bindir)
+$(PROJ_bindir):
+ $(Verb) $(MKDIR) $(PROJ_bindir)
-$(libdir):
- $(Verb) $(MKDIR) $(libdir)
+$(PROJ_libdir):
+ $(Verb) $(MKDIR) $(PROJ_libdir)
-$(bytecode_libdir):
- $(Verb) $(MKDIR) $(bytecode_libdir)
+$(PROJ_includedir):
+ $(Verb) $(MKDIR) $(PROJ_includedir)
-$(sysconfdir):
- $(Verb) $(MKDIR) $(sysconfdir)
+$(PROJ_etcdir):
+ $(Verb) $(MKDIR) $(PROJ_etcdir)
# To create other directories, as needed, and timestamp their creation
%/.dir:
$(Verb) $(MKDIR) $* > /dev/null
- @$(DATE) > $@
+ $(Verb) $(DATE) > $@
.PRECIOUS: $(ObjDir)/.dir $(LibDir)/.dir $(ToolDir)/.dir $(ExmplDir)/.dir
.PRECIOUS: $(LLVMLibDir)/.dir $(LLVMToolDir)/.dir $(LLVMExmplDir)/.dir
$(Verb) for dir in $(DIRS); do \
if [ ! -f $$dir/Makefile ]; then \
$(MKDIR) $$dir; \
- cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ $(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
- ($(MAKE) -C $$dir $@ ) || exit 1; \
+ if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
+ ($(MAKE) -C $$dir $@ ) || exit 1; \
+ fi ; \
done
endif
$(Verb) for dir in $(EXPERIMENTAL_DIRS); do \
if [ ! -f $$dir/Makefile ]; then \
$(MKDIR) $$dir; \
- cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ $(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
- ($(MAKE) -C $$dir $@ ) || exit 0; \
+ if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
+ ($(MAKE) -C $$dir $@ ) || exit 0; \
+ fi ; \
done
endif
SubDirs += $(PARALLEL_DIRS)
-# Unfortunately, this list must be maintained if new
-# recursive targets are added.
+# Unfortunately, this list must be maintained if new recursive targets are added
all :: $(addsuffix /.makeall ,$(PARALLEL_DIRS))
clean :: $(addsuffix /.makeclean ,$(PARALLEL_DIRS))
clean-all:: $(addsuffix /.makeclean-all,$(PARALLEL_DIRS))
-check :: $(addsuffix /.makecheck ,$(PARALLEL_DIRS))
install :: $(addsuffix /.makeinstall ,$(PARALLEL_DIRS))
uninstall:: $(addsuffix /.makeuninstall,$(PARALLEL_DIRS))
+install-bytecode :: $(addsuffix /.makeinstall-bytecode,$(PARALLEL_DIRS))
-Parallel_Targets := $(foreach T,$(RecursiveTargets),%/.make$(T))
+ParallelTargets := $(foreach T,$(RecursiveTargets),%/.make$(T))
-$(Parallel_Targets) :
+$(ParallelTargets) :
$(Verb) if [ ! -f $(@D)/Makefile ]; then \
$(MKDIR) $(@D); \
- cp $(BUILD_SRC_DIR)/$(@D)/Makefile $(@D)/Makefile; \
+ $(CP) $(PROJ_SRC_DIR)/$(@D)/Makefile $(@D)/Makefile; \
fi; \
- $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@)
+ if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
+ $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@) ; \
+ fi
endif
#---------------------------------------------------------
$(RecursiveTargets)::
$(Verb) for dir in $(OPTIONAL_DIRS); do \
- if [ -d $(BUILD_SRC_DIR)/$$dir ]; then\
+ if [ -d $(PROJ_SRC_DIR)/$$dir ]; then\
if [ ! -f $$dir/Makefile ]; then \
$(MKDIR) $$dir; \
- cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ $(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
- ($(MAKE) -C$$dir $@ ) || exit 1; \
+ if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
+ ($(MAKE) -C$$dir $@ ) || exit 1; \
+ fi ; \
fi \
done
endif
#---------------------------------------------------------
ifdef CONFIG_FILES
-install-local:: $(sysconfdir) $(CONFIG_FILES)
- $(Echo) Installing Configuration Files To $(sysconfdir)
+install-local:: $(PROJ_etcdir) $(CONFIG_FILES)
+ $(Echo) Installing Configuration Files To $(PROJ_etcdir)
$(Verb)for file in $(CONFIG_FILES); do \
- $(INSTALL) $(BUILD_SRC_DIR)/$${file} $(sysconfdir) ; \
+ if test -f $(PROJ_OBJ_DIR)/$${file} ; then \
+ $(INSTALL) $(PROJ_OBJ_DIR)/$${file} $(PROJ_etcdir) ; \
+ elif test -f $(PROJ_SRC_DIR)/$${file} ; then \
+ $(INSTALL) $(PROJ_SRC_DIR)/$${file} $(PROJ_etcdir) ; \
+ else \
+ $(ECHO) Error: cannot find config file $${file}. ; \
+ fi \
done
uninstall-local::
- $(Echo) Uninstalling Configuration Files From $(sysconfdir)
+ $(Echo) Uninstalling Configuration Files From $(PROJ_etcdir)
$(Verb)for file in $(CONFIG_FILES); do \
- $(RM) -f $(sysconfdir)/$${file} ; \
+ $(RM) -f $(PROJ_etcdir)/$${file} ; \
done
endif
# Library Build Rules: Four ways to build a library
###############################################################################
+#---------------------------------------------------------
+# Bytecode Module Targets:
+# If the user set MODULE_NAME then they want to build a
+# bytecode module from the sources. We compile all the
+# sources and link it together into a single bytecode
+# module.
+#---------------------------------------------------------
+
+ifdef MODULE_NAME
+ifeq ($(strip $(LLVMGCC)),)
+$(warning Modules require llvm-gcc but no llvm-gcc is available)
+else
+
+Module := $(LibDir)/$(MODULE_NAME).bc
+LinkModule := $(LLVMGCCWITHPATH) -shared -nostdlib
+
+ifdef EXPORTED_SYMBOL_FILE
+LinkModule += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
+endif
+
+$(Module): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir $(GCCLD)
+ $(Echo) Building $(BuildMOde) Bytecode Module $(notdir $@)
+ $(Verb) $(LinkModule) -o $@ $(ObjectsBC)
+
+all-local:: $(Module)
+
+clean-local::
+ifneq ($(strip $(Module)),)
+ -$(Verb) $(RM) -f $(Module)
+endif
+
+ifdef BYTECODE_DESTINATION
+ModuleDestDir := $(BYTECODE_DESTINATION)
+else
+ModuleDestDir := $(PROJ_libdir)
+endif
+
+DestModule := $(ModuleDestDir)/$(MODULE_NAME).bc
+
+install-module:: $(DestModule)
+install-local:: $(DestModule)
+
+$(DestModule): $(ModuleDestDir) $(Module)
+ $(Echo) Installing $(BuildMode) Bytecode Module $(DestModule)
+ $(Verb) $(INSTALL) $(Module) $@
+
+uninstall-local::
+ $(Echo) Uninstalling $(BuildMode) Bytecode Module $(DestModule)
+ -$(Verb) $(RM) -f $(DestModule)
+
+endif
+endif
# if we're building a library ...
ifdef LIBRARYNAME
# Make sure there isn't any extranous whitespace on the LIBRARYNAME option
LIBRARYNAME := $(strip $(LIBRARYNAME))
+ifdef LOADABLE_MODULE
+LibName.LA := $(LibDir)/$(LIBRARYNAME).la
+else
LibName.LA := $(LibDir)/lib$(LIBRARYNAME).la
+endif
LibName.A := $(LibDir)/lib$(LIBRARYNAME).a
LibName.O := $(LibDir)/$(LIBRARYNAME).o
-LibName.BC := $(LibDir)/lib$(LIBRARYNAME).bc
+LibName.BCA:= $(LibDir)/lib$(LIBRARYNAME).bca
#---------------------------------------------------------
# Shared Library Targets:
all-local:: $(LibName.LA)
-$(LibName.LA): $(BUILT_SOURCES) $(ObjectsLO) $(LibDir)/.dir
+$(LibName.LA): $(ObjectsLO) $(LibDir)/.dir
$(Echo) Linking $(BuildMode) Shared Library $(LIBRARYNAME)$(SHLIBEXT)
$(Verb) $(Link) -o $@ $(ObjectsLO)
$(Verb) $(LTInstall) $@ $(LibDir)
-$(Verb) $(RM) -f $(LibName.LA)
endif
-DestSharedLib = $(libdir)/lib$(LIBRARYNAME)$(SHLIBEXT)
+DestSharedLib = $(PROJ_libdir)/lib$(LIBRARYNAME)$(SHLIBEXT)
install-local:: $(DestSharedLib)
-$(DestSharedLib): $(libdir) $(LibName.LA)
+$(DestSharedLib): $(PROJ_libdir) $(LibName.LA)
$(Echo) Installing $(BuildMode) Shared Library $(DestSharedLib)
$(Verb) $(LTInstall) $(LibName.LA) $(DestSharedLib)
- $(Verb) $(LIBTOOL) --finish $(libdir)
+ $(Verb) $(LIBTOOL) --finish $(PROJ_libdir)
uninstall-local::
$(Echo) Uninstalling $(BuildMode) Shared Library $(DestSharedLib)
- -$(Verb) $(RM) -f $(libdir)/lib$(LIBRARYNAME).*
+ -$(Verb) $(RM) -f $(PROJ_libdir)/lib$(LIBRARYNAME).*
endif
# targets for building them.
#---------------------------------------------------------
ifdef BYTECODE_LIBRARY
-
-ifdef EXPORTED_SYMBOL_LIST
- BCLinkLib += -Xlinker -internalize-public-api-list=$(EXPORTED_SYMBOL_LIST)
+ifeq ($(strip $(LLVMGCC)),)
+$(warning Bytecode libraries require llvm-gcc which could not be found)
else
- ifdef EXPORTED_SYMBOL_FILE
- BCLinkLib += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
- else
- BCLinkLib += -Xlinker -disable-internalize
- endif
-endif
-all-local:: $(LibName.BC)
+# make the C and C++ compilers strip debug info out of bytecode libraries.
+BCCompile.C += -Wa,-strip-debug
+BCCompile.CXX += -Wa,-strip-debug
+
+all-local:: $(LibName.BCA)
-$(LibName.BC): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir
- $(Echo) Linking $(BuildMode) Bytecode Library $(notdir $@)
- $(Verb) $(BCLinkLib) -o $@ $(ObjectsBC)
+ifdef EXPORTED_SYMBOL_FILE
+BCLinkLib = $(LLVMGCCWITHPATH) -shared -nostdlib -Xlinker \
+ -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
+
+$(LibName.BCA): $(ObjectsBC) $(LibDir)/.dir $(GCCLD) \
+ $(LLVMToolDir)/llvm-ar
+ $(Echo) Building $(BuildMode) Bytecode Archive $(notdir $@) \
+ "(internalize)"
+ $(Verb) $(BCLinkLib) -o $(ObjDir)/$(LIBRARYNAME).o $(ObjectsBC)
+ $(Verb) $(RM) -f $@
+ $(Verb) $(LArchive) $@ $(ObjDir)/$(LIBRARYNAME).o
+else
+$(LibName.BCA): $(ObjectsBC) $(LibDir)/.dir \
+ $(LLVMToolDir)/llvm-ar
+ $(Echo) Building $(BuildMode) Bytecode Archive $(notdir $@)
+ $(Verb) $(RM) -f $@
+ $(Verb) $(LArchive) $@ $(ObjectsBC)
+
+endif
clean-local::
-ifneq ($(strip $(LibName.BC)),)
- -$(Verb) $(RM) -f $(LibName.BC)
+ifneq ($(strip $(LibName.BCA)),)
+ -$(Verb) $(RM) -f $(LibName.BCA)
endif
-DestBytecodeLib = $(bytecode_libdir)/lib$(LIBRARYNAME).bc
+ifdef BYTECODE_DESTINATION
+BytecodeDestDir := $(BYTECODE_DESTINATION)
+else
+BytecodeDestDir := $(PROJ_libdir)
+endif
+
+DestBytecodeLib = $(BytecodeDestDir)/lib$(LIBRARYNAME).a
+
+install-bytecode-local:: $(DestBytecodeLib)
install-local:: $(DestBytecodeLib)
-$(DestBytecodeLib): $(bytecode_libdir) $(LibName.BC)
- $(Echo) Installing $(BuildMode) Bytecode Library $(DestBytecodeLib)
- $(Verb) $(INSTALL) $(LibName.BC) $@
+$(DestBytecodeLib): $(BytecodeDestDir) $(LibName.BCA)
+ $(Echo) Installing $(BuildMode) Bytecode Archive $(DestBytecodeLib)
+ $(Verb) $(INSTALL) $(LibName.BCA) $@
uninstall-local::
- $(Echo) Uninstalling $(BuildMode) Bytecode Library $(DestBytecodeLib)
+ $(Echo) Uninstalling $(BuildMode) Bytecode Archive $(DestBytecodeLib)
-$(Verb) $(RM) -f $(DestBytecodeLib)
endif
+endif
#---------------------------------------------------------
# ReLinked Library Targets:
all-local:: $(LibName.O)
-$(LibName.O): $(BUILT_SOURCES) $(ObjectsO) $(LibDir)/.dir
+$(LibName.O): $(ObjectsO) $(LibDir)/.dir
$(Echo) Linking $(BuildMode) Object Library $(notdir $@)
$(Verb) $(Relink) -o $@ $(ObjectsO)
-$(Verb) $(RM) -f $(LibName.O)
endif
-DestRelinkedLib = $(libdir)/$(LIBRARYNAME).o
+DestRelinkedLib = $(PROJ_libdir)/$(LIBRARYNAME).o
install-local:: $(DestRelinkedLib)
-$(DestRelinkedLib): $(libdir) $(LibName.O)
+$(DestRelinkedLib): $(PROJ_libdir) $(LibName.O)
$(Echo) Installing $(BuildMode) Object Library $(DestRelinkedLib)
$(Verb) $(LTInstall) $(LibName.O) $(DestRelinkedLib)
all-local:: $(LibName.A)
-$(LibName.A): $(BUILT_SOURCES) $(ObjectsO) $(LibDir)/.dir
+$(LibName.A): $(ObjectsO) $(LibDir)/.dir
$(Echo) Building $(BuildMode) Archive Library $(notdir $@)
-$(Verb) $(RM) -f $@
$(Verb) $(Archive) $@ $(ObjectsO)
-$(Verb) $(RM) -f $(LibName.A)
endif
-DestArchiveLib := $(libdir)/lib$(LIBRARYNAME).a
+DestArchiveLib := $(PROJ_libdir)/lib$(LIBRARYNAME).a
install-local:: $(DestArchiveLib)
-$(DestArchiveLib): $(libdir) $(LibName.A)
+$(DestArchiveLib): $(PROJ_libdir) $(LibName.A)
$(Echo) Installing $(BuildMode) Archive Library $(DestArchiveLib)
- $(Verb) $(MKDIR) $(libdir)
+ $(Verb) $(MKDIR) $(PROJ_libdir)
$(Verb) $(LTInstall) $(LibName.A) $(DestArchiveLib)
uninstall-local::
ifdef TOOLNAME
+#---------------------------------------------------------
+# Handle the special "JIT" value for LLVM_LIBS which is a
+# shorthand for a bunch of libraries that get the correct
+# JIT support for a tool that runs JIT.
+#---------------------------------------------------------
+ifeq ($(LLVMLIBS),JIT)
+
+# Make sure we can get our own symbols in the tool
+Link += -dlopen self
+
+# Generic JIT libraries
+JIT_LIBS := LLVMInterpreter LLVMJIT LLVMCodeGen LLVMExecutionEngine
+
+# You can enable the X86 JIT on a non-X86 host by setting the flag
+# ENABLE_X86_JIT on the make command line. If not, it will still be
+# enabled automagically on an X86 host.
+ifeq ($(ARCH), x86)
+ ENABLE_X86_JIT = 1
+endif
+
+# What the X86 JIT requires
+ifdef ENABLE_X86_JIT
+ JIT_LIBS += LLVMX86 LLVMSelectionDAG
+endif
+
+# You can enable the SparcV9 JIT on a non-SparcV9 host by setting the flag
+# ENABLE_SPARCV9_JIT on the make command line. If not, it will still be
+# enabled automagically on an SparcV9 host.
+ifeq ($(ARCH), Sparc)
+ ENABLE_SPARCV9_JIT = 1
+endif
+
+# What the Sparc JIT requires
+ifdef ENABLE_SPARCV9_JIT
+ JIT_LIBS += LLVMSparcV9 LLVMSparcV9ModuloSched LLVMSparcV9InstrSched \
+ LLVMSparcV9LiveVar LLVMInstrumentation.a LLVMProfilePaths \
+ LLVMBCWriter LLVMTransforms.a LLVMipo.a LLVMipa.a \
+ LLVMDataStructure.a LLVMSparcV9RegAlloc
+endif
+
+# You can enable the PowerPC JIT on a non-PowerPC host by setting the flag
+# ENABLE_PPC_JIT on the make command line. If not, it will still be
+# enabled automagically on an PowerPC host.
+ifeq ($(ARCH), PowerPC)
+ ENABLE_PPC_JIT = 1
+endif
+
+# What the PowerPC JIT requires
+ifdef ENABLE_PPC_JIT
+ JIT_LIBS += LLVMPowerPC
+endif
+
+LLVMLIBS := $(JIT_LIBS) LLVMScalarOpts LLVMAnalysis.a LLVMTransformUtils.a \
+ LLVMBCReader LLVMCore LLVMSupport.a LLVMTarget.a LLVMbzip2 \
+ LLVMSystem.a $(PLATFORMLIBDL)
+endif
+
#---------------------------------------------------------
# Set up variables for building a tool.
#---------------------------------------------------------
ProjLibsPaths := $(addprefix $(LibDir)/,$(ProjUsedLibs))
LLVMLibsPaths := $(addprefix $(LLVMLibDir)/,$(LLVMUsedLibs))
-#---------------------------------------------------------
-# Handle optional compression libraries automatically
-#---------------------------------------------------------
-ExtraLibs := $(LIBS)
-ifeq ($(HAVE_BZIP2),1)
-ExtraLibs += -lbz2
-endif
-ifeq ($(HAVE_ZLIB),1)
-ExtraLibs += -lz
-endif
-
#---------------------------------------------------------
# Tell make that we need to rebuild subdirectories before
# we can link the tool. This affects things like LLI which
$(ToolBuildPath): $(ToolDir)/.dir
endif
-$(ToolBuildPath): $(BUILT_SOURCES) $(ObjectsO) $(ProjLibsPaths) $(LLVMLibsPaths)
+$(ToolBuildPath): $(ObjectsO) $(ProjLibsPaths) $(LLVMLibsPaths)
$(Echo) Linking $(BuildMode) executable $(TOOLNAME) $(StripWarnMsg)
$(Verb) $(Link) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(ProjLibsOptions) \
- $(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB)
+ $(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB) $(LIBS)
$(Echo) ======= Finished Linking $(BuildMode) Executable $(TOOLNAME) $(StripWarnMsg)
-DestTool = $(bindir)/$(TOOLNAME)
+DestTool = $(PROJ_bindir)/$(TOOLNAME)
install-local:: $(DestTool)
-$(DestTool): $(bindir) $(ToolBuildPath)
+$(DestTool): $(PROJ_bindir) $(ToolBuildPath)
$(Echo) Installing $(BuildMode) $(DestTool)
$(Verb) $(INSTALL) $(ToolBuildPath) $(DestTool)
#---------------------------------------------------------
ifdef SHARED_LIBRARY
-$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)"
$(Verb) if $(LTCompile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACXXd $< -o $@ ; \
then $(MV) -f "$(ObjDir)/$*.LACXXd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.LACXXd"; exit 1; fi
-$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build (PIC)"
+ $(Verb) if $(LTCompile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACXXd $< -o $@ ; \
+ then $(MV) -f "$(ObjDir)/$*.LACXXd" "$(ObjDir)/$*.d"; \
+ else $(RM) -f "$(ObjDir)/$*.LACXXd"; exit 1; fi
+
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.c for $(BuildMode) build (PIC)"
$(Verb) if $(LTCompile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACd $< -o $@ ; \
then $(MV) -f "$(ObjDir)/$*.LACd" "$(ObjDir)/$*.d"; \
#---------------------------------------------------------
else
-$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir
+$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.cpp for $(BuildMode) build"
$(Verb) if $(Compile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.CXXd $< -o $@ ; \
then $(MV) -f "$(ObjDir)/$*.CXXd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.CXXd"; exit 1; fi
-$(ObjDir)/%.o: %.c $(ObjDir)/.dir
+$(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build"
+ $(Verb) if $(Compile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.CXXd $< -o $@ ; \
+ then $(MV) -f "$(ObjDir)/$*.CXXd" "$(ObjDir)/$*.d"; \
+ else $(RM) -f "$(ObjDir)/$*.CXXd"; exit 1; fi
+
+$(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.c for $(BuildMode) build"
$(Verb) if $(Compile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.Cd $< -o $@ ; \
then $(MV) -f "$(ObjDir)/$*.Cd" "$(ObjDir)/$*.d"; \
endif
#---------------------------------------------------------
-# Create .bc files in the ObjDir directory from .cpp and .c files...
+# Create .bc files in the ObjDir directory from .cpp .cc and .c files...
#---------------------------------------------------------
-$(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir
+$(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
$(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)"
$(Verb) if $(BCCompile.CXX) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCXXd" $< -o $@ ; \
then $(MV) -f "$(ObjDir)/$*.BCCXXd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.BCCXXd"; exit 1; fi
-$(ObjDir)/%.bc: %.c $(ObjDir)/.dir
+$(ObjDir)/%.bc: %.cc $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build (bytecode)"
+ $(Verb) if $(BCCompile.CXX) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCXXd" $< -o $@ ; \
+ then $(MV) -f "$(ObjDir)/$*.BCCXXd" "$(ObjDir)/$*.d"; \
+ else $(RM) -f "$(ObjDir)/$*.BCCXXd"; exit 1; fi
+
+$(ObjDir)/%.bc: %.c $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
$(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)"
$(Verb) if $(BCCompile.C) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCd" $< -o $@ ; \
then $(MV) -f "$(ObjDir)/$*.BCCd" "$(ObjDir)/$*.d"; \
ifdef SHARED_LIBRARY
-$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)"
$(LTCompile.CXX) $< -o $@
-$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir
- $(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)"
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build (PIC)"
+ $(LTCompile.CXX) $< -o $@
+
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.c for $(BuildMode) build (PIC)"
$(LTCompile.C) $< -o $@
else
-$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir
+$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.cpp for $(BuildMode) build"
$(Compile.CXX) $< -o $@
-$(ObjDir)/%.o: %.c $(ObjDir)/.dir
- $(Echo) "Compiling $*.cpp for $(BuildMode) build"
+$(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build"
+ $(Compile.CXX) $< -o $@
+
+$(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.c for $(BuildMode) build"
$(Compile.C) $< -o $@
endif
-$(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir
+$(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
$(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)"
$(BCCompile.CXX) $< -o $@
-$(ObjDir)/%.bc: %.c $(ObjDir)/.dir
+$(ObjDir)/%.bc: %.cc $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build (bytecode)"
+ $(BCCompile.CXX) $< -o $@
+
+$(ObjDir)/%.bc: %.c $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
$(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)"
$(BCCompile.C) $< -o $@
ifdef TARGET
-TDFiles := $(strip $(wildcard $(BUILD_SRC_DIR)/*.td) $(LLVM_SRC_ROOT)/lib/Target/Target.td)
+TDFiles := $(strip $(wildcard $(PROJ_SRC_DIR)/*.td) $(LLVM_SRC_ROOT)/lib/Target/Target.td)
INCFiles := $(filter %.inc,$(BUILT_SOURCES))
-
-$(INCFiles) : $(TBLGEN) $(TDFiles)
-
-%GenRegisterNames.inc : %.td
+INCTMPFiles := $(INCFiles:%=$(ObjDir)/%.tmp)
+.PRECIOUS: $(INCTMPFiles) $(INCFiles)
+
+# All of these files depend on tblgen and the .td files.
+$(INCTMPFiles) : $(TBLGEN) $(TDFiles)
+
+# INCFiles rule: All of the tblgen generated files are emitted to
+# $(ObjDir)/%.inc.tmp, instead of emitting them directly to %.inc. This allows
+# us to only "touch" the real file if the contents of it change. IOW, if
+# tblgen is modified, all of the .inc.tmp files are regereated, but no
+# dependencies of the .inc files are, unless the contents of the .inc file
+# changes.
+$(INCFiles) : %.inc : $(ObjDir)/%.inc.tmp
+ $(Verb) $(CMP) -s $@ $< || $(CP) $< $@
+
+$(TARGET:%=$(ObjDir)/%GenRegisterNames.inc.tmp): \
+$(ObjDir)/%GenRegisterNames.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) register names with tblgen"
$(Verb) $(TableGen) -gen-register-enums -o $@ $<
-%GenRegisterInfo.h.inc : %.td
+$(TARGET:%=$(ObjDir)/%GenRegisterInfo.h.inc.tmp): \
+$(ObjDir)/%GenRegisterInfo.h.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) register information header with tblgen"
$(Verb) $(TableGen) -gen-register-desc-header -o $@ $<
-%GenRegisterInfo.inc : %.td
+$(TARGET:%=$(ObjDir)/%GenRegisterInfo.inc.tmp): \
+$(ObjDir)/%GenRegisterInfo.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) register info implementation with tblgen"
$(Verb) $(TableGen) -gen-register-desc -o $@ $<
-%GenInstrNames.inc : %.td
+$(TARGET:%=$(ObjDir)/%GenInstrNames.inc.tmp): \
+$(ObjDir)/%GenInstrNames.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) instruction names with tblgen"
$(Verb) $(TableGen) -gen-instr-enums -o $@ $<
-%GenInstrInfo.inc : %.td
+$(TARGET:%=$(ObjDir)/%GenInstrInfo.inc.tmp): \
+$(ObjDir)/%GenInstrInfo.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) instruction information with tblgen"
$(Verb) $(TableGen) -gen-instr-desc -o $@ $<
-%GenAsmWriter.inc : %.td
+$(TARGET:%=$(ObjDir)/%GenAsmWriter.inc.tmp): \
+$(ObjDir)/%GenAsmWriter.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) assembly writer with tblgen"
$(Verb) $(TableGen) -gen-asm-writer -o $@ $<
-%GenATTAsmWriter.inc : %.td
- $(Echo) "Building $(<F) AT&T assembly writer with tblgen"
- $(Verb) $(TableGen) -gen-asm-writer -o $@ $<
-
-%GenIntelAsmWriter.inc : %.td
- $(Echo) "Building $(<F) Intel assembly writer with tblgen"
+$(TARGET:%=$(ObjDir)/%GenAsmWriter1.inc.tmp): \
+$(ObjDir)/%GenAsmWriter1.inc.tmp : %.td $(ObjDir)/.dir
+ $(Echo) "Building $(<F) assembly writer #1 with tblgen"
$(Verb) $(TableGen) -gen-asm-writer -asmwriternum=1 -o $@ $<
-%GenInstrSelector.inc: %.td
- $(Echo) "Building $(<F) instruction selector with tblgen"
- $(Verb) $(TableGen) -gen-instr-selector -o $@ $<
-
-%GenCodeEmitter.inc:: %.td
+$(TARGET:%=$(ObjDir)/%GenCodeEmitter.inc.tmp): \
+$(ObjDir)/%GenCodeEmitter.inc.tmp: %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) code emitter with tblgen"
$(Verb) $(TableGen) -gen-emitter -o $@ $<
# this is a hack around it.
# FIXME. (f.e. char Buffer[10000] )
%.cpp: %.l
- $(Echo) Flexing $<
+ $(Echo) Flexing $*.l
$(Verb) $(FLEX) -t $< | \
$(SED) 's/void yyunput/inline void yyunput/' | \
$(SED) 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \
# which they can be "generated." This allows make to ignore them and
# reproduce the dependency lists.
%.h:: ;
+%.hpp:: ;
# Define clean-local to clean the current directory. Note that this uses a
# very conservative approach ensuring that empty variables do not cause
tags:: TAGS CTAGS
TAGS:
- find $(BUILD_SRC_ROOT)/include $(BUILD_SRC_ROOT)/lib \
- $(BUILD_SRC_ROOT)/tools $(BUILD_SRC_ROOT)/examples \
- $(BUILD_OBJ_ROOT)/include $(BUILD_OBJ_ROOT)/lib \
- $(BUILD_OBJ_ROOT)/tools $(BUILD_OBJ_ROOT)/examples \
+ find $(PROJ_SRC_ROOT)/include $(PROJ_SRC_ROOT)/lib \
+ $(PROJ_SRC_ROOT)/tools $(PROJ_SRC_ROOT)/examples \
+ $(PROJ_OBJ_ROOT)/include $(PROJ_OBJ_ROOT)/lib \
+ $(PROJ_OBJ_ROOT)/tools $(PROJ_OBJ_ROOT)/examples \
-name '*.cpp' -o -name '*.h' | \
$(ETAGS) $(ETAGSFLAGS) -
CTAGS:
- find $(BUILD_SRC_ROOT)/include $(BUILD_SRC_ROOT)/lib \
- $(BUILD_SRC_ROOT)/tools $(BUILD_SRC_ROOT)/examples \
- $(BUILD_OBJ_ROOT)/include $(BUILD_OBJ_ROOT)/lib \
- $(BUILD_OBJ_ROOT)/tools $(BUILD_OBJ_ROOT)/examples \
+ find $(PROJ_SRC_ROOT)/include $(PROJ_SRC_ROOT)/lib \
+ $(PROJ_SRC_ROOT)/tools $(PROJ_SRC_ROOT)/examples \
+ $(PROJ_OBJ_ROOT)/include $(PROJ_OBJ_ROOT)/lib \
+ $(PROJ_OBJ_ROOT)/tools $(PROJ_OBJ_ROOT)/examples \
\( -name '*.cpp' -o -name '*.h' \) -print | \
- ctags -ImtT -o $(BUILD_OBJ_ROOT)/CTAGS -L -
+ ctags -ImtT -o $(PROJ_OBJ_ROOT)/CTAGS -L -
###############################################################################
# Get the list of dependency files
DependFiles := $(basename $(filter %.cpp %.c %.cc, $(Sources)))
-DependFiles := $(patsubst %,$(BUILD_OBJ_DIR)/$(BuildMode)/%.d,$(DependFiles))
+DependFiles := $(patsubst %,$(PROJ_OBJ_DIR)/$(BuildMode)/%.d,$(DependFiles))
-include /dev/null $(DependFiles)
endif
+###############################################################################
+# CHECK: Running the test suite
+###############################################################################
+
+check::
+ $(Verb) if test -d "$(PROJ_OBJ_ROOT)/test" ; then \
+ if test -f "$(PROJ_OBJ_ROOT)/test/Makefile" ; then \
+ $(EchoCmd) Running test suite ; \
+ $(MAKE) -C $(PROJ_OBJ_ROOT)/test check-local \
+ TESTSUITE=$(TESTSUITE) ; \
+ else \
+ $(EchoCmd) No Makefile in test directory ; \
+ fi ; \
+ else \
+ $(EchoCmd) No test directory ; \
+ fi
+
###############################################################################
# DISTRIBUTION: Handle construction of a distribution tarball
###############################################################################
#------------------------------------------------------------------------
# Define distribution related variables
#------------------------------------------------------------------------
-DistName := $(LLVM_TARBALL_NAME)
-DistDir := $(BUILD_OBJ_ROOT)/$(DistName)
-TopDistDir := $(BUILD_OBJ_ROOT)/$(DistName)
-DistTarGZip := $(BUILD_OBJ_ROOT)/$(DistName).tar.gz
-DistZip := $(BUILD_OBJ_ROOT)/$(DistName).zip
-DistTarBZ2 := $(BUILD_OBJ_ROOT)/$(DistName).tar.bz2
+DistName := $(PROJECT_NAME)-$(PROJ_VERSION)
+DistDir := $(PROJ_OBJ_ROOT)/$(DistName)
+TopDistDir := $(PROJ_OBJ_ROOT)/$(DistName)
+DistTarGZip := $(PROJ_OBJ_ROOT)/$(DistName).tar.gz
+DistZip := $(PROJ_OBJ_ROOT)/$(DistName).zip
+DistTarBZ2 := $(PROJ_OBJ_ROOT)/$(DistName).tar.bz2
DistAlways := CREDITS.TXT LICENSE.TXT README.txt README AUTHORS COPYING \
ChangeLog INSTALL NEWS Makefile Makefile.common Makefile.rules \
Makefile.config.in configure autoconf
DistOther := $(notdir $(wildcard \
- $(BUILD_SRC_DIR)/*.h \
- $(BUILD_SRC_DIR)/*.td \
- $(BUILD_SRC_DIR)/*.def \
- $(BUILD_SRC_DIR)/*.ll \
- $(BUILD_SRC_DIR)/*.in))
-DistSources := $(Sources) $(EXTRA_DIST)
+ $(PROJ_SRC_DIR)/*.h \
+ $(PROJ_SRC_DIR)/*.td \
+ $(PROJ_SRC_DIR)/*.def \
+ $(PROJ_SRC_DIR)/*.ll \
+ $(PROJ_SRC_DIR)/*.in))
DistSubDirs := $(SubDirs)
-DistFiles := $(DistAlways) $(DistSources) $(DistOther)
+DistSources = $(Sources) $(EXTRA_DIST)
+DistFiles = $(DistAlways) $(DistSources) $(DistOther)
#------------------------------------------------------------------------
# We MUST build distribution with OBJ_DIR != SRC_DIR
#------------------------------------------------------------------------
-ifeq ($(BUILD_SRC_DIR),$(BUILD_OBJ_DIR))
+ifeq ($(PROJ_SRC_DIR),$(PROJ_OBJ_DIR))
dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip ::
$(Echo) ERROR: Target $@ only available with OBJ_DIR != SRC_DIR
-DistCheckTop :=
else
-DistCheckTop := check
-
-#------------------------------------------------------------------------
-# Prevent catastrophic remove
-#------------------------------------------------------------------------
-ifeq ($(LLVM_TARBALL_NAME),)
-$(error LLVM_TARBALL_NAME is empty. Please rerun configure)
-endif
-
#------------------------------------------------------------------------
# Prevent attempt to run dist targets from anywhere but the top level
#------------------------------------------------------------------------
ifneq ($(LEVEL),.)
-
dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip ::
- $(Echo) ERROR: You must run $@ from $(BUILD_OBJ_ROOT)
-
+ $(Echo) ERROR: You must run $@ from $(PROJ_OBJ_ROOT)
else
#------------------------------------------------------------------------
dist-gzip:: $(DistTarGZip)
-$(DistTarGZip) : distdir
+$(DistTarGZip) : $(TopDistDir)/.makedistdir
$(Echo) Packing gzipped distribution tar file.
- $(Verb) cd $(BUILD_OBJ_ROOT) ; $(TAR) chf - "$(DistName)" | gzip -c > "$(DistTarGZip)"
+ $(Verb) cd $(PROJ_OBJ_ROOT) ; $(TAR) chf - "$(DistName)" | \
+ $(GZIP) -c > "$(DistTarGZip)"
dist-bzip2:: $(DistTarBZ2)
-$(DistTarBZ2) : distdir
+$(DistTarBZ2) : $(TopDistDir)/.makedistdir
$(Echo) Packing bzipped distribution tar file.
- $(Verb) cd $(BUILD_OBJ_ROOT) ; $(TAR) chf - $(DistName) | $(BZIP2) -c >$(DistTarBZ2)
+ $(Verb) cd $(PROJ_OBJ_ROOT) ; $(TAR) chf - $(DistName) | \
+ $(BZIP2) -c >$(DistTarBZ2)
dist-zip:: $(DistZip)
-$(DistZip) : distdir
+$(DistZip) : $(TopDistDir)/.makedistdir
$(Echo) Packing zipped distribution file.
$(Verb) rm -f $(DistZip)
- $(Verb) cd $(BUILD_OBJ_ROOT) ; $(ZIP) -rq $(DistZip) $(DistName)
+ $(Verb) cd $(PROJ_OBJ_ROOT) ; $(ZIP) -rq $(DistZip) $(DistName)
dist :: $(DistTarGZip) $(DistTarBZ2) $(DistZip)
$(Echo) ===== DISTRIBUTION PACKAGING SUCESSFUL =====
-DistCheckDir := $(LLVM_OBJ_ROOT)/_distcheckdir
+DistCheckDir := $(PROJ_OBJ_ROOT)/_distcheckdir
-dist-check:: $(DistCheckTop) $(DistTarGZip)
+dist-check:: $(DistTarGZip)
$(Echo) Checking distribution tar file.
$(Verb) if test -d $(DistCheckDir) ; then \
$(RM) -rf $(DistCheckDir) ; \
gunzip -c $(DistTarGZip) | $(TAR) xf - && \
cd build && \
../$(DistName)/configure --prefix="$(DistCheckDir)/install" \
- --srcdir=../$(DistName) --with-llvmgccdir="$(LLVMGCCDIR)" && \
+ --srcdir=../$(DistName) && \
+ $(MAKE) all && \
$(MAKE) check && \
$(MAKE) install && \
$(MAKE) uninstall && \
dist-clean::
$(Echo) Cleaning distribution files
- -$(Verb) $(RM) -rf $(DistTarGZip) $(DistTarBZ2) $(DistZip) $(DistName) $(DistCheckDir)
+ -$(Verb) $(RM) -rf $(DistTarGZip) $(DistTarBZ2) $(DistZip) $(DistName) \
+ $(DistCheckDir)
endif
#------------------------------------------------------------------------
# Provide the recursive distdir target for building the distribution directory
#------------------------------------------------------------------------
-distdir : $(DistSources)
- $(Echo) Building Distribution Directory $(DistDir)
+distdir: $(DistDir)/.makedistdir
+$(DistDir)/.makedistdir: $(DistSources)
$(Verb) if test "$(DistDir)" = "$(TopDistDir)" ; then \
if test -d "$(DistDir)" ; then \
find $(DistDir) -type d ! -perm -200 -exec chmod u+w {} ';' || \
exit 1 ; \
fi ; \
- $(EchoCmd) Removing $(DistDir) ; \
+ $(EchoCmd) Removing old $(DistDir) ; \
$(RM) -rf $(DistDir); \
+ $(EchoCmd) Making 'all' to verify build ; \
+ $(MAKE) all ; \
fi
+ $(Echo) Building Distribution Directory $(DistDir)
$(Verb) $(MKDIR) $(DistDir)
- $(Verb) srcdirstrip=`echo "$(BUILD_SRC_DIR)" | sed 's|.|.|g'`; \
- srcrootstrip=`echo "$(BUILD_SRC_ROOT)" | sed 's|.|.|g'`; \
+ $(Verb) srcdirstrip=`echo "$(PROJ_SRC_DIR)" | sed 's|.|.|g'`; \
+ srcrootstrip=`echo "$(PROJ_SRC_ROOT)" | sed 's|.|.|g'`; \
for file in $(DistFiles) ; do \
case "$$file" in \
- $(BUILD_SRC_DIR)/*) file=`echo "$$file" | sed "s#^$$srcdirstrip/##"`;; \
- $(BUILD_SRC_ROOT)/*) file=`echo "$$file" | sed "s#^$$srcrootstrip/#$(BUILD_OBJ_ROOT)/#"`;; \
+ $(PROJ_SRC_DIR)/*) \
+ file=`echo "$$file" | sed "s#^$$srcdirstrip/##"` \
+ ;; \
+ $(PROJ_SRC_ROOT)/*) \
+ file=`echo "$$file" | \
+ sed "s#^$$srcrootstrip/##"` \
+ ;; \
esac; \
- if test -f "$$file" || test -d "$$file" ; then \
+ if test -f "$(PROJ_SRC_DIR)/$$file" || \
+ test -d "$(PROJ_SRC_DIR)/$$file" ; then \
+ from_dir="$(PROJ_SRC_DIR)" ; \
+ elif test -f "$$file" || test -d "$$file" ; then \
from_dir=. ; \
- else \
- from_dir=$(BUILD_SRC_DIR); \
- fi; \
- to_dir=`echo "$$file" | sed -e 's#/[^/]*$$##'`; \
+ fi ; \
+ to_dir=`echo "$$file" | sed -e 's#/[^/]*$$##'` ; \
if test "$$to_dir" != "$$file" && test "$$to_dir" != "."; then \
to_dir="$(DistDir)/$$dir"; \
$(MKDIR) "$$to_dir" ; \
$(MKDIR) "$$to_dir/$$mid_dir" || exit 1; \
fi ; \
if test -d "$$from_dir/$$file"; then \
- if test -d "$(BUILD_SRC_DIR)/$$file" && \
- test "$$from_dir" != "$(BUILD_SRC_DIR)" ; then \
- cp -pR "$(BUILD_SRC_DIR)/$$file" "$$to_dir" || exit 1; \
+ if test -d "$(PROJ_SRC_DIR)/$$file" && \
+ test "$$from_dir" != "$(PROJ_SRC_DIR)" ; then \
+ $(CP) -pR "$(PROJ_SRC_DIR)/$$file" "$$to_dir" || exit 1; \
fi; \
- cp -pR $$from_dir/$$file $$to_dir || exit 1; \
+ $(CP) -pR $$from_dir/$$file $$to_dir || exit 1; \
elif test -f "$$from_dir/$$file" ; then \
- cp -p "$$from_dir/$$file" "$(DistDir)/$$file" || exit 1; \
+ $(CP) -p "$$from_dir/$$file" "$(DistDir)/$$file" || exit 1; \
elif test -L "$$from_dir/$$file" ; then \
- cp -pd "$$from_dir/$$file" $(DistDir)/$$file || exit 1; \
+ $(CP) -pd "$$from_dir/$$file" $(DistDir)/$$file || exit 1; \
elif echo "$(DistAlways)" | grep -v "$$file" >/dev/null ; then \
- $(EchoCmd) "===== WARNING: Distribution Source $$from_dir/$$file Not Found!" ; \
+ $(EchoCmd) "===== WARNING: Distribution Source " \
+ "$$from_dir/$$file Not Found!" ; \
elif test "$(Verb)" != '@' ; then \
$(EchoCmd) "Skipping non-existent $$from_dir/$$file" ; \
fi; \
if test "$$subdir" \!= "." ; then \
new_distdir="$(DistDir)/$$subdir" ; \
test -d "$$new_distdir" || $(MKDIR) "$$new_distdir" || exit 1; \
- ( cd $$subdir && $(MAKE) DistDir="$$new_distdir" distdir ) || exit 1; \
+ ( cd $$subdir && $(MAKE) DistDir="$$new_distdir" distdir ) || \
+ exit 1; \
fi; \
done
- $(Verb) $(MAKE) DistDir="$(DistDir)" dist-hook || exit 1
- -$(Verb) find $(DistDir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(SHELL) $(INSTALL_SH) -c -m a+r {} {} \; \
- || chmod -R a+r $(DistDir)
+ $(Verb) if test "$(DistDir)" = "$(TopDistDir)" ; then \
+ $(EchoCmd) Eliminating CVS directories from distribution ; \
+ $(RM) -rf `find $(TopDistDir) -type d -name CVS -print` ;\
+ $(MAKE) dist-hook ; \
+ $(FIND) $(TopDistDir) -type d ! -perm -777 -exec chmod a+rwx {} \; \
+ -o ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; \
+ -o ! -type d ! -perm -400 -exec chmod a+r {} \; \
+ -o ! -type d ! -perm -444 -exec \
+ $(SHELL) $(INSTALL_SH) -c -m a+r {} {} \; \
+ || chmod -R a+r $(DistDir) ; \
+ fi
# This is invoked by distdir target, define it as a no-op to avoid errors if not
# defined by user.
ifeq ($(LEVEL),.)
#------------------------------------------------------------------------
-# Install support for project's include files:
+# Install support for the project's include files:
#------------------------------------------------------------------------
install-local::
$(Echo) Installing include files
- $(Verb) $(MKDIR) $(includedir)
- $(Verb) if [ -d "$(BUILD_SRC_ROOT)/include" ] ; then \
- cd $(BUILD_SRC_ROOT)/include && \
- find . -path '*/Internal' -prune -o '(' -type f \
- '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' ')' \
- -print ')' | grep -v CVS | pax -rwdvpe $(includedir) ; \
+ $(Verb) $(MKDIR) $(PROJ_includedir)
+ $(Verb) if [ -d "$(PROJ_SRC_ROOT)/include" ] ; then \
+ cd $(PROJ_SRC_ROOT)/include && \
+ for hdr in `find . -type f '!' '(' -name '*~' -o -name '.cvsignore' \
+ -o -name '.#*' -o -name '*.in' ')' -print | grep -v CVS ` ; do \
+ $(INSTALL) $$hdr $(PROJ_includedir) ; \
+ done ; \
+ fi
+ $(Verb) if [ -d "$(PROJ_OBJ_ROOT)/include" ] ; then \
+ cd $(PROJ_OBJ_ROOT)/include && \
+ for hdr in `find . -type f -print` ; do \
+ $(INSTALL) $$hdr $(PROJ_includedir) ; \
+ done ; \
fi
uninstall-local::
$(Echo) Uninstalling include files
- $(Verb) if [ -d "$(BUILD_SRC_ROOT)/include" ] ; then \
- cd $(BUILD_SRC_ROOT)/include && \
+ $(Verb) if [ -d "$(PROJ_SRC_ROOT)/include" ] ; then \
+ cd $(PROJ_SRC_ROOT)/include && \
$(RM) -f `find . -path '*/Internal' -prune -o '(' -type f \
- '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' ')' \
- -print ')' | grep -v CVS | sed 's#^#$(includedir)/#'` ; \
- fi
+ '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' -o -name '*.in' ')' \
+ -print ')' | grep -v CVS | sed 's#^#$(PROJ_includedir)/#'` ; \
+ cd $(PROJ_SRC_ROOT)/include && \
+ $(RM) -f `find . -path '*/Internal' -prune -o '(' -type f -name '*.in' -print ')' \
+ | sed 's#\.in$$##;s#^#$(PROJ_includedir)/#'` ; \
+ fi
endif
# Print out the directories used for building
#------------------------------------------------------------------------
printvars::
- $(Echo) "BuildMode : " '$(BuildMode)'
- $(Echo) "BUILD_SRC_ROOT : " '$(BUILD_SRC_ROOT)'
- $(Echo) "BUILD_SRC_DIR : " '$(BUILD_SRC_DIR)'
- $(Echo) "BUILD_OBJ_ROOT : " '$(BUILD_OBJ_ROOT)'
- $(Echo) "BUILD_OBJ_DIR : " '$(BUILD_OBJ_DIR)'
- $(Echo) "LLVM_SRC_ROOT : " '$(LLVM_SRC_ROOT)'
- $(Echo) "LLVM_OBJ_ROOT : " '$(LLVM_OBJ_ROOT)'
- $(Echo) "libdir : " '$(libdir)'
- $(Echo) "bindir : " '$(bindir)'
- $(Echo) "sysconfdir : " '$(sysconfdir)'
- $(Echo) "bytecode_libdir: " '$(bytecode_libdir)'
- $(Echo) "UserTargets : " '$(UserTargets)'
- $(Echo) "ObjMakefiles : " '$(ObjMakefiles)'
- $(Echo) "SrcMakefiles : " '$(SrcMakefiles)'
- $(Echo) "ObjDir : " '$(ObjDir)'
- $(Echo) "LibDir : " '$(LibDir)'
- $(Echo) "ToolDir : " '$(ToolDir)'
- $(Echo) "ExmplDir : " '$(ExmplDir)'
- $(Echo) "TDFiles : " '$(TDFiles)'
- $(Echo) "INCFiles : " '$(INCFiles)'
- $(Echo) "Compile.CXX : " '$(Compile.CXX)'
- $(Echo) "Compile.C : " '$(Compile.C)'
- $(Echo) "Archive : " '$(Archive)'
- $(Echo) "YaccFiles : " '$(YaccFiles)'
- $(Echo) "LexFiles : " '$(LexFiles)'
+ $(Echo) "BuildMode : " '$(BuildMode)'
+ $(Echo) "PROJ_SRC_ROOT: " '$(PROJ_SRC_ROOT)'
+ $(Echo) "PROJ_SRC_DIR : " '$(PROJ_SRC_DIR)'
+ $(Echo) "PROJ_OBJ_ROOT: " '$(PROJ_OBJ_ROOT)'
+ $(Echo) "PROJ_OBJ_DIR : " '$(PROJ_OBJ_DIR)'
+ $(Echo) "LLVM_SRC_ROOT: " '$(LLVM_SRC_ROOT)'
+ $(Echo) "LLVM_OBJ_ROOT: " '$(LLVM_OBJ_ROOT)'
+ $(Echo) "PROJ_prefix : " '$(PROJ_prefix)'
+ $(Echo) "PROJ_bindir : " '$(PROJ_bindir)'
+ $(Echo) "PROJ_libdir : " '$(PROJ_libdir)'
+ $(Echo) "PROJ_etcdir : " '$(PROJ_etcdir)'
+ $(Echo) "UserTargets : " '$(UserTargets)'
+ $(Echo) "ObjMakefiles : " '$(ObjMakefiles)'
+ $(Echo) "SrcMakefiles : " '$(SrcMakefiles)'
+ $(Echo) "ObjDir : " '$(ObjDir)'
+ $(Echo) "LibDir : " '$(LibDir)'
+ $(Echo) "ToolDir : " '$(ToolDir)'
+ $(Echo) "ExmplDir : " '$(ExmplDir)'
+ $(Echo) "Sources : " '$(Sources)'
+ $(Echo) "TDFiles : " '$(TDFiles)'
+ $(Echo) "INCFiles : " '$(INCFiles)'
+ $(Echo) "INCTMPFiles : " '$(INCTMPFiles)'
+ $(Echo) "Preconditions: " '$(Preconditions)'
+ $(Echo) "Compile.CXX : " '$(Compile.CXX)'
+ $(Echo) "Compile.C : " '$(Compile.C)'
+ $(Echo) "Archive : " '$(Archive)'
+ $(Echo) "YaccFiles : " '$(YaccFiles)'
+ $(Echo) "LexFiles : " '$(LexFiles)'
+ $(Echo) "Module : " '$(Module)'
projects / oota-llvm.git / blobdiff