CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused
+ifeq ($(OS),HP-UX)
+ CompileCommonOpts += -D_REENTRANT -D_HPUX_SOURCE
+endif
+
LD.Flags += -L$(LibDir) -L$(LLVMLibDir)
CPP.Flags += -I$(PROJ_OBJ_DIR) -I$(PROJ_SRC_DIR) \
-I$(PROJ_OBJ_ROOT)/include \
# in the file so they get built before dependencies
#---------------------------------------------------------
-$(PROJ_bindir):
- $(Verb) $(MKDIR) $(PROJ_bindir)
-
-$(PROJ_libdir):
- $(Verb) $(MKDIR) $(PROJ_libdir)
-
-$(PROJ_includedir):
- $(Verb) $(MKDIR) $(PROJ_includedir)
-
-$(PROJ_etcdir):
- $(Verb) $(MKDIR) $(PROJ_etcdir)
+$(PROJ_bindir): $(PROJ_bindir)/.dir
+$(PROJ_libdir): $(PROJ_libdir)/.dir
+$(PROJ_includedir): $(PROJ_includedir)/.dir
+$(PROJ_etcdir): $(PROJ_etcdir)/.dir
# To create other directories, as needed, and timestamp their creation
%/.dir:
endif
+###############################################################################
+# Set up variables for building libararies
+###############################################################################
+
+#---------------------------------------------------------
+# Handle the special "JIT" value for LLVM_LIBS which is a
+# shorthand for a bunch of libraries that get the correct
+# JIT support for a library or a tool that runs JIT.
+#---------------------------------------------------------
+ifeq ($(LLVMLIBS),JIT)
+
+# Make sure we can get our own symbols in the tool
+Link += -dlopen self
+
+# Generic JIT libraries
+JIT_LIBS := LLVMInterpreter LLVMJIT LLVMCodeGen LLVMExecutionEngine
+
+# You can enable the X86 JIT on a non-X86 host by setting the flag
+# ENABLE_X86_JIT on the make command line. If not, it will still be
+# enabled automagically on an X86 host.
+ifeq ($(ARCH), x86)
+ ENABLE_X86_JIT = 1
+endif
+
+# What the X86 JIT requires
+ifdef ENABLE_X86_JIT
+ JIT_LIBS += LLVMX86 LLVMSelectionDAG
+endif
+
+# You can enable the SparcV9 JIT on a non-SparcV9 host by setting the flag
+# ENABLE_SPARCV9_JIT on the make command line. If not, it will still be
+# enabled automagically on an SparcV9 host.
+ifeq ($(ARCH), Sparc)
+ ENABLE_SPARCV9_JIT = 1
+endif
+
+# What the Sparc JIT requires
+ifdef ENABLE_SPARCV9_JIT
+ JIT_LIBS += LLVMSparcV9 LLVMSparcV9ModuloSched LLVMSparcV9InstrSched \
+ LLVMSparcV9LiveVar LLVMInstrumentation.a LLVMProfilePaths \
+ LLVMBCWriter LLVMTransforms.a LLVMipo.a LLVMipa.a \
+ LLVMDataStructure.a LLVMSparcV9RegAlloc
+endif
+
+# You can enable the PowerPC JIT on a non-PowerPC host by setting the flag
+# ENABLE_PPC_JIT on the make command line. If not, it will still be
+# enabled automagically on an PowerPC host.
+ifeq ($(ARCH), PowerPC)
+ ENABLE_PPC_JIT = 1
+endif
+
+# What the PowerPC JIT requires
+ifdef ENABLE_PPC_JIT
+ JIT_LIBS += LLVMPowerPC LLVMSelectionDAG
+endif
+
+# You can enable the Alpha JIT on a non-Alpha host by setting the flag
+# ENABLE_ALPHA_JIT on the make command line. If not, it will still be
+# enabled automagically on an Alpha host.
+ifeq ($(ARCH), Alpha)
+ ENABLE_ALPHA_JIT = 1
+endif
+
+# What the Alpha JIT requires
+ifdef ENABLE_ALPHA_JIT
+ JIT_LIBS += LLVMAlpha LLVMSelectionDAG
+endif
+
+LLVMLIBS := $(JIT_LIBS) LLVMScalarOpts LLVMAnalysis.a LLVMTransformUtils.a \
+ LLVMBCReader LLVMCore LLVMSupport.a LLVMTarget.a LLVMbzip2 \
+ LLVMSystem.a $(PLATFORMLIBDL)
+endif
+
+#---------------------------------------------------------
+# Define various command line options pertaining to the
+# libraries needed when linking. There are "Proj" libs
+# (defined by the user's project) and "LLVM" libs (defined
+# by the # LLVM project).
+#---------------------------------------------------------
+#some versions of gcc on alpha produce to many symbols, so use a .a file
+ifeq ($(ARCH),Alpha)
+USEDLIBS := $(subst LLVMCore, LLVMCore.a, $(USEDLIBS))
+LLVMLIBS := $(subst LLVMCore, LLVMCore.a, $(LLVMLIBS))
+endif
+
+ProjLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
+ProjLibsOptions := $(patsubst %.o, $(LibDir)/%.o, $(ProjLibsOptions))
+LLVMLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS)))
+LLVMLibsOptions := $(patsubst %.o, $(LLVMLibDir)/%.o, $(LLVMLibsOptions))
+ProjUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
+LLVMUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS)))
+ProjLibsPaths := $(addprefix $(LibDir)/,$(ProjUsedLibs))
+LLVMLibsPaths := $(addprefix $(LLVMLibDir)/,$(LLVMUsedLibs))
+
###############################################################################
# Library Build Rules: Four ways to build a library
###############################################################################
ifdef MODULE_NAME
ifeq ($(strip $(LLVMGCC)),)
-$(warning Modules require llvm-gcc but no llvm-gcc is available)
+$(warning Modules require llvm-gcc but no llvm-gcc is available ****)
else
Module := $(LibDir)/$(MODULE_NAME).bc
endif
$(Module): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir $(GCCLD)
- $(Echo) Building $(BuildMOde) Bytecode Module $(notdir $@)
+ $(Echo) Building $(BuildMode) Bytecode Module $(notdir $@)
$(Verb) $(LinkModule) -o $@ $(ObjectsBC)
all-local:: $(Module)
all-local:: $(LibName.LA)
+ifdef LINK_LIBS_IN_SHARED
+$(LibName.LA): $(ObjectsLO) $(LibDir)/.dir
+ $(Echo) Linking $(BuildMode) Shared Library $(LIBRARYNAME)$(SHLIBEXT)
+ $(Verb) $(Link) -o $@ $(ObjectsLO) \
+ $(ProjLibsOptions) $(LLVMLibsOptions)
+ $(Verb) $(LTInstall) $@ $(LibDir)
+else
$(LibName.LA): $(ObjectsLO) $(LibDir)/.dir
$(Echo) Linking $(BuildMode) Shared Library $(LIBRARYNAME)$(SHLIBEXT)
$(Verb) $(Link) -o $@ $(ObjectsLO)
$(Verb) $(LTInstall) $@ $(LibDir)
+endif
clean-local::
ifneq ($(strip $(LibName.LA)),)
#---------------------------------------------------------
ifdef BYTECODE_LIBRARY
ifeq ($(strip $(LLVMGCC)),)
-$(warning Bytecode libraries require llvm-gcc which could not be found)
+$(warning Bytecode libraries require llvm-gcc which could not be found ****)
else
# make the C and C++ compilers strip debug info out of bytecode libraries.
ifdef TOOLNAME
-#---------------------------------------------------------
-# Handle the special "JIT" value for LLVM_LIBS which is a
-# shorthand for a bunch of libraries that get the correct
-# JIT support for a tool that runs JIT.
-#---------------------------------------------------------
-ifeq ($(LLVMLIBS),JIT)
-
-# Make sure we can get our own symbols in the tool
-Link += -dlopen self
-
-# Generic JIT libraries
-JIT_LIBS := LLVMInterpreter LLVMJIT LLVMCodeGen LLVMExecutionEngine
-
-# You can enable the X86 JIT on a non-X86 host by setting the flag
-# ENABLE_X86_JIT on the make command line. If not, it will still be
-# enabled automagically on an X86 host.
-ifeq ($(ARCH), x86)
- ENABLE_X86_JIT = 1
-endif
-
-# What the X86 JIT requires
-ifdef ENABLE_X86_JIT
- JIT_LIBS += LLVMX86 LLVMSelectionDAG
-endif
-
-# You can enable the SparcV9 JIT on a non-SparcV9 host by setting the flag
-# ENABLE_SPARCV9_JIT on the make command line. If not, it will still be
-# enabled automagically on an SparcV9 host.
-ifeq ($(ARCH), Sparc)
- ENABLE_SPARCV9_JIT = 1
-endif
-
-# What the Sparc JIT requires
-ifdef ENABLE_SPARCV9_JIT
- JIT_LIBS += LLVMSparcV9 LLVMSparcV9ModuloSched LLVMSparcV9InstrSched \
- LLVMSparcV9LiveVar LLVMInstrumentation.a LLVMProfilePaths \
- LLVMBCWriter LLVMTransforms.a LLVMipo.a LLVMipa.a \
- LLVMDataStructure.a LLVMSparcV9RegAlloc
-endif
-
-# You can enable the PowerPC JIT on a non-PowerPC host by setting the flag
-# ENABLE_PPC_JIT on the make command line. If not, it will still be
-# enabled automagically on an PowerPC host.
-ifeq ($(ARCH), PowerPC)
- ENABLE_PPC_JIT = 1
-endif
-
-# What the PowerPC JIT requires
-ifdef ENABLE_PPC_JIT
- JIT_LIBS += LLVMPowerPC LLVMSelectionDAG
-endif
-
-LLVMLIBS := $(JIT_LIBS) LLVMScalarOpts LLVMAnalysis.a LLVMTransformUtils.a \
- LLVMBCReader LLVMCore LLVMSupport.a LLVMTarget.a LLVMbzip2 \
- LLVMSystem.a $(PLATFORMLIBDL)
-endif
-
#---------------------------------------------------------
# Set up variables for building a tool.
#---------------------------------------------------------
ifdef EXAMPLE_TOOL
-ToolBuildPath := $(ExmplDir)/$(TOOLNAME)$(EXEEXT)
+ToolBuildPath := $(ExmplDir)/$(strip $(TOOLNAME))$(EXEEXT)
else
-ToolBuildPath := $(ToolDir)/$(TOOLNAME)$(EXEEXT)
+ToolBuildPath := $(ToolDir)/$(strip $(TOOLNAME))$(EXEEXT)
endif
-ProjLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
-ProjLibsOptions := $(patsubst %.o, $(LibDir)/%.o, $(ProjLibsOptions))
-LLVMLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS)))
-LLVMLibsOptions := $(patsubst %.o, $(LLVMLibDir)/%.o, $(LLVMLibsOptions))
-ProjUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
-LLVMUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS)))
-ProjLibsPaths := $(addprefix $(LibDir)/,$(ProjUsedLibs))
-LLVMLibsPaths := $(addprefix $(LLVMLibDir)/,$(LLVMUsedLibs))
#---------------------------------------------------------
# Tell make that we need to rebuild subdirectories before
gunzip -c $(DistTarGZip) | $(TAR) xf - && \
cd build && \
../$(DistName)/configure --prefix="$(DistCheckDir)/install" \
- --srcdir=../$(DistName) && \
+ --srcdir=../$(DistName) $(DIST_CHECK_CONFIG_OPTIONS) && \
$(MAKE) all && \
$(MAKE) check && \
$(MAKE) install && \
if test -d "$$from_dir/$$file"; then \
if test -d "$(PROJ_SRC_DIR)/$$file" && \
test "$$from_dir" != "$(PROJ_SRC_DIR)" ; then \
- $(CP) -pR "$(PROJ_SRC_DIR)/$$file" "$$to_dir" || exit 1; \
+ cd $(PROJ_SRC_DIR) ; \
+ $(TAR) cf - $$file --exclude .svn --exclude CVS | \
+ ( cd $$to_dir ; $(TAR) xf - ) ; \
+ cd $(PROJ_OBJ_DIR) ; \
+ else \
+ cd $$from_dir ; \
+ $(TAR) cf - $$file --exclude .svn --exclude CVS | \
+ ( cd $$to_dir ; $(TAR) xf - ) ; \
+ cd $(PROJ_OBJ_DIR) ; \
fi; \
- $(CP) -pR $$from_dir/$$file $$to_dir || exit 1; \
elif test -f "$$from_dir/$$file" ; then \
$(CP) -p "$$from_dir/$$file" "$(DistDir)/$$file" || exit 1; \
elif test -L "$$from_dir/$$file" ; then \
fi; \
done
$(Verb) if test "$(DistDir)" = "$(TopDistDir)" ; then \
- $(EchoCmd) Eliminating CVS directories from distribution ; \
- $(RM) -rf `find $(TopDistDir) -type d -name CVS -print` ;\
+ $(EchoCmd) Eliminating CVS/.svn directories from distribution ; \
+ $(RM) -rf `find $(TopDistDir) -type d \( -name CVS -o -name .svn \) -print` ;\
$(MAKE) dist-hook ; \
$(FIND) $(TopDistDir) -type d ! -perm -777 -exec chmod a+rwx {} \; \
-o ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; \
projects / oota-llvm.git / blobdiff