-#===-- Makefile.rules - Common make rules for LLVM -------*- makefile -*--====
-#
+#===-- Makefile.rules - Common make rules for LLVM ---------*- Makefile -*--===#
+#
# The LLVM Compiler Infrastructure
#
# This file was developed by the LLVM research group and is distributed under
# the University of Illinois Open Source License. See LICENSE.TXT for details.
#
-##===----------------------------------------------------------------------===##
-#
-# This file is included by all of the LLVM makefiles. This file defines common
-# rules to do things like compile a .cpp file or generate dependency info.
-# These are platform dependent, so this is the file used to specify these
-# system dependent operations.
-#
-# The following functionality can be set by setting incoming variables.
-# The variable $(LEVEL) *must* be set:
-#
-# 1. LEVEL - The level of the current subdirectory from the top of the
-# MagicStats view. This level should be expressed as a path, for
-# example, ../.. for two levels deep.
-#
-# 2. DIRS - A list of subdirectories to be built. Fake targets are set up
-# so that each of the targets "all", "install", and "clean" each build
-# the subdirectories before the local target. DIRS are guaranteed to be
-# built in order.
-#
-# 3. PARALLEL_DIRS - A list of subdirectories to be built, but that may be
-# built in any order. All DIRS are built in order before PARALLEL_DIRS are
-# built, which are then built in any order.
-#
-# 4. Source - If specified, this sets the source code filenames. If this
-# is not set, it defaults to be all of the .cpp, .c, .y, and .l files
-# in the current directory. Also, if you want to build files in addition
-# to the local files, you can use the ExtraSource variable
-#
-# 5. SourceDir - If specified, this specifies a directory that the source files
-# are in, if they are not in the current directory. This should include a
-# trailing / character.
-#
-# 6. LLVM_SRC_ROOT - If specified, points to the top of the LLVM source tree.
+#===------------------------------------------------------------------------===#
#
-# 8. BUILD_SRC_DIR - The directory which contains the current set of Makefiles
-# and usually the source code too (unless SourceDir is set).
-#
-# 9. BUILD_SRC_ROOT - The root directory of the source code being compiled.
-#
-# 10. BUILD_OBJ_DIR - The directory where object code should be placed.
-#
-# 11. BUILD_OBJ_ROOT - The root directory for where object code should be
-# placed.
-#
-# For building,
-# LLVM, LLVM_SRC_ROOT = BUILD_SRC_ROOT
+# This file is included by all of the LLVM makefiles. For details on how to use
+# it properly, please see the document MakefileGuide.html in the docs directory.
#
#===-----------------------------------------------------------------------====
#
# Set the VPATH so that we can find source files.
#
-VPATH=$(SourceDir)
+VPATH=$(BUILD_SRC_DIR)
-###########################################################################
-# Default Targets:
-# The following targets are the standard top level targets for
-# building.
-###########################################################################
+###############################################################################
+# TARGETS: Define standard targets that can be invoked
+###############################################################################
-# Ensure people re-run configure when it gets updated
-all::$(LLVM_OBJ_ROOT)/config.status
+#--------------------------------------------------------------------
+# Define the various target sets
+#--------------------------------------------------------------------
+RECURSIVE_TARGETS := all clean check install uninstall
+LOCAL_TARGETS := all-local clean-local check-local install-local \
+ printvars uninstall-local
+TOPLEV_TARGETS := dist dist-check dist-clean tags
+USER_TARGETS := $(RECURSIVE_TARGETS) $(LOCAL_TARGETS) $(TOPLEV_TARGETS)
+INTERNAL_TARGETS := preconditions
-ifdef SHARED_LIBRARY
-# if SHARED_LIBRARY is specified, the default is to build the dynamic lib
-all:: dynamic
-endif
+###############################################################################
+# INITIALIZATION: Basic things the makefile needs
+###############################################################################
-ifdef BYTECODE_LIBRARY
-# if BYTECODE_LIBRARY is specified, the default is to build the bytecode lib
-all:: bytecodelib
-install:: bytecodelib-install
+#--------------------------------------------------------------------
+# Reset the list of suffixes we know how to build
+#--------------------------------------------------------------------
+.SUFFIXES:
+.SUFFIXES: .c .cpp .h .hpp .y .l .lo .o .a $(SHLIBEXT) .bc .td .ps .dot $(SUFFIXES)
+
+#--------------------------------------------------------------------
+# Mark all of these targets as phony to avoid implicit rule search
+#--------------------------------------------------------------------
+.PHONY: $(USER_TARGETS) $(INTERNAL_TARGETS)
+
+#--------------------------------------------------------------------
+# Make sure all the user-target rules are double colon rules and
+# they are defined first.
+#--------------------------------------------------------------------
+
+$(USER_TARGETS)::
+
+################################################################################
+# PRECONDITIONS: that which must be built/checked first
+################################################################################
+
+SRCMKFILES := $(filter %Makefile %Makefile.rules %Makefile.tests \
+ %Makefile.JIT,$(wildcard $(BUILD_SRC_DIR)/Makefile*))
+OBJMKFILES := $(subst $(BUILD_SRC_DIR),$(BUILD_OBJ_DIR),$(SRCMKFILES))
+CONFIGURE := $(LLVM_SRC_ROOT)/configure
+CONFIG_STATUS := $(LLVM_OBJ_ROOT)/config.status
+MAKE_CONFIG_IN:= $(LLVM_SRC_ROOT)/Makefile.config.in
+MAKE_CONFIG := $(LLVM_OBJ_ROOT)/Makefile.config
+PRECONDITIONS := $(CONFIG_STATUS) $(MAKE_CONFIG) $(OBJMKFILES)
+
+preconditions : $(PRECONDITIONS)
+
+#------------------------------------------------------------------------
+# Make sure the BUILT_SOURCES are built first
+#------------------------------------------------------------------------
+$(filter-out clean clean-local,USER_TARGETS):: $(BUILT_SOURCES)
+
+clean-local::
+ifneq ($(strip $(BUILT_SOURCES)),)
+ $(VERB) $(RM) -f $(BUILT_SOURCES)
endif
-# Default Rule: Make sure it's also a :: rule
-all ::
+$(BUILT_SOURCES) : $(BUILD_OBJ_ROOT)/Makefile
-# Default for install is to at least build everything...
-install ::
+#------------------------------------------------------------------------
+# Make sure we're not using a stale configuration
+#------------------------------------------------------------------------
+.PRECIOUS: $(CONFIG_STATUS)
+$(CONFIG_STATUS): $(CONFIGURE)
+ @$(ECHO) Reconfiguring with $<
+ $(VERB) $(CONFIG_STATUS) --recheck $(CONFIGUREFLAGS)
+ $(VERB) $(CONFIG_STATUS)
-# Default rule for test. It ensures everything has a test rule
-test::
+#------------------------------------------------------------------------
+# Make sure the configuration makefile is up to date
+#------------------------------------------------------------------------
+$(MAKE_CONFIG): $(MAKE_CONFIG_IN) $(CONFIG_STATUS)
+ @$(ECHO) Regenerating $@
+ $(VERB) cd $(LLVM_OBJ_ROOT) ; $(CONFIG_STATUS) Makefile.config
-# Default rule for building only bytecode.
-bytecode::
+#------------------------------------------------------------------------
+# If the Makefile in the source tree has been updated, copy it over into the
+# build tree. But, only do this if the source and object makefiles differ
+#------------------------------------------------------------------------
+ifneq ($(BUILD_OBJ_DIR),$(BUILD_SRC_DIR))
+
+$(BUILD_OBJ_DIR)/Makefile : $(BUILD_SRC_DIR)/Makefile
+ @$(ECHO) "Updating Makefile"
+ $(VERB) $(MKDIR) $(@D)
+ $(VERB) cp -f $< $@
+
+# Copy the Makefile.* files unless we're in the root directory which avoids
+# the copying of Makefile.config.in or other things that should be explicitly
+# taken care of.
+$(BUILD_OBJ_DIR)/Makefile% : $(BUILD_SRC_DIR)/Makefile%
+ @case '$?' in \
+ *Makefile.rules) ;; \
+ *.in) ;; \
+ *) $(ECHO) "Updating $(@F)" ; \
+ $(MKDIR) $(@D) ; \
+ cp -f $< $@ ;; \
+ esac
+
+endif
-# Print out the directories used for building
-prdirs::
- @${ECHO} "Build Source Root: " $(BUILD_SRC_ROOT)
- @${ECHO} "Build Source Dir : " $(BUILD_SRC_DIR)
- @${ECHO} "Build Object Root: " $(BUILD_OBJ_ROOT)
- @${ECHO} "Build Object Dir : " $(BUILD_OBJ_DIR)
- @${ECHO} "LLVM Source Root: " $(LLVM_SRC_ROOT)
- @${ECHO} "LLVM Object Root: " $(LLVM_OBJ_ROOT)
-
-###########################################################################
-# Suffixes and implicit rules:
-# Empty out the list of suffixes, generate a list that is only
-# used by this Makefile, and cancel useless implicit rules. This
-# will hopefully speed up compilation a little bit.
-###########################################################################
-.SUFFIXES:
-.SUFFIXES: .c .cpp .h .hpp .y .l
-.SUFFIXES: .lo .o .a .so .bc .td
-.SUFFIXES: .ps .dot .d
+#------------------------------------------------------------------------
+# Set up the basic dependencies
+#------------------------------------------------------------------------
+$(USER_TARGETS):: $(PRECONDITIONS)
-#
-# Mark all of these targets as phony. This will hopefully speed up builds
-# slightly since GNU Make will not try to find implicit rules for targets
-# which are marked as Phony.
-#
-.PHONY: all dynamic bytecodelib bytecodelib-install
-.PHONY: clean distclean install test bytecode prdirs
+all:: all-local
+check:: check-local
+clean:: clean-local
+install:: install-local
+uninstall:: uninstall-local
+check-local:: all-local
+install-local:: all-local
-###########################################################################
-# Miscellaneous paths and commands:
-# This section defines various configuration macros, such as where
-# to find burg, tblgen, and libtool.
-###########################################################################
+###############################################################################
+# VARIABLES: Set up various variables based on configuration data
+###############################################################################
#--------------------------------------------------------------------
-# Variables derived from configuration options...
+# Variables derived from configuration we are building
#--------------------------------------------------------------------
-#BinInstDir=/usr/local/bin
-#LibInstDir=/usr/local/lib/xxx
-#DocInstDir=/usr/doc/xxx
-
-BURG_OPTS = -I
-
ifdef ENABLE_PROFILING
- ENABLE_OPTIMIZED = 1
CONFIGURATION := Profile
+ CXXFLAGS += -O3 -DNDEBUG -felide-constructors -finline-functions -pg
+ CFLAGS += -O3 -DNDEBUG -pg
+ LDFLAGS += -O3 -DNDEBUG -pg
else
ifdef ENABLE_OPTIMIZED
CONFIGURATION := Release
+ CXXFLAGS += -O3 -DNDEBUG -finline-functions -felide-constructors -fomit-frame-pointer
+ CFLAGS += -O3 -DNDEBUG -fomit-frame-pointer
+ LDFLAGS += -O3 -DNDEBUG
else
CONFIGURATION := Debug
+ CXXFLAGS += -g -D_DEBUG
+ CFLAGS += -g -D_DEBUG
+ LDFLAGS += -g -D_DEBUG
+ KEEP_SYMBOLS := 1
endif
endif
-#
-# Enable this for profiling support with 'gprof'
-# This automatically enables optimized builds.
-#
-ifdef ENABLE_PROFILING
- PROFILE = -pg
-endif
+ARFLAGS := cru
-###########################################################################
-# Library Locations:
-# These variables describe various library locations:
-#
-# DEST* = Location of where libraries that are built will be placed.
-# LLVM* = Location of LLVM libraries used for linking.
-# PROJ* = Location of previously built libraries used for linking.
-###########################################################################
-
-# Libraries that are being built
-DESTLIBDEBUG := $(BUILD_OBJ_ROOT)/lib/Debug
-DESTLIBRELEASE := $(BUILD_OBJ_ROOT)/lib/Release
-DESTLIBPROFILE := $(BUILD_OBJ_ROOT)/lib/Profile
-DESTLIBBYTECODE := $(BUILD_OBJ_ROOT)/lib/BytecodeLibs
-DESTLIBCURRENT := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION)
-
-# LLVM libraries used for linking
-LLVMLIBDEBUGSOURCE := $(LLVM_OBJ_ROOT)/lib/Debug
-LLVMLIBRELEASESOURCE := $(LLVM_OBJ_ROOT)/lib/Release
-LLVMLIBPROFILESOURCE := $(LLVM_OBJ_ROOT)/lib/Profile
-LLVMLIBCURRENTSOURCE := $(LLVM_OBJ_ROOT)/lib/$(CONFIGURATION)
-
-# Libraries that were built that will now be used for linking
-PROJLIBDEBUGSOURCE := $(BUILD_OBJ_ROOT)/lib/Debug
-PROJLIBRELEASESOURCE := $(BUILD_OBJ_ROOT)/lib/Release
-PROJLIBPROFILESOURCE := $(BUILD_OBJ_ROOT)/lib/Profile
-PROJLIBCURRENTSOURCE := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION)
-
-###########################################################################
-# Tool Locations
-# These variables describe various tool locations:
-#
-# DEST* = Location of where tools that are built will be placed.
-# LLVM* = Location of LLVM tools used for building.
-# PROJ* = Location of previously built tools used for linking.
-###########################################################################
-
-DESTTOOLDEBUG := $(BUILD_OBJ_ROOT)/tools/Debug
-DESTTOOLRELEASE := $(BUILD_OBJ_ROOT)/tools/Release
-DESTTOOLPROFILE := $(BUILD_OBJ_ROOT)/tools/Profile
-DESTTOOLCURRENT := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION)
-
-LLVMTOOLDEBUG := $(LLVM_OBJ_ROOT)/tools/Debug
-LLVMTOOLRELEASE := $(LLVM_OBJ_ROOT)/tools/Release
-LLVMTOOLPROFILE := $(LLVM_OBJ_ROOT)/tools/Profile
-LLVMTOOLCURRENT := $(LLVM_OBJ_ROOT)/tools/$(CONFIGURATION)
-
-PROJTOOLDEBUG := $(BUILD_OBJ_ROOT)/tools/Debug
-PROJTOOLRELEASE := $(BUILD_OBJ_ROOT)/tools/Release
-PROJTOOLPROFILE := $(BUILD_OBJ_ROOT)/tools/Profile
-PROJTOOLCURRENT := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION)
+#--------------------------------------------------------------------
+# Directory locations
+#--------------------------------------------------------------------
+OBJDIR := $(BUILD_OBJ_DIR)/$(CONFIGURATION)
+LIBDIR := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION)
+TOOLDIR := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION)
+LLVMLIBDIR := $(LLVM_OBJ_ROOT)/lib/$(CONFIGURATION)
+LLVMTOOLDIR := $(LLVM_OBJ_ROOT)/tools/$(CONFIGURATION)
-#
-# Libtool is found in the current directory.
-#
-LIBTOOL := $(LLVM_OBJ_ROOT)/mklib
+#--------------------------------------------------------------------
+# Full Paths To Compiled Tools and Utilities
+#--------------------------------------------------------------------
+LIBTOOL := $(LLVM_OBJ_ROOT)/mklib
+LLVMAS := $(LLVMTOOLDIR)/llvm-as$(EXEEXT)
+BURG := $(LLVMTOOLDIR)/burg$(EXEEXT)
+TBLGEN := $(LLVMTOOLDIR)/tblgen$(EXEEXT)
+GCCLD := $(LLVMTOOLDIR)/gccld$(EXEEXT)
+LLVMGCC := PATH=$(LLVMTOOLDIR):$(PATH) $(LLVMGCCDIR)/bin/gcc
+LLVMGXX := PATH=$(LLVMTOOLDIR):$(PATH) $(LLVMGCCDIR)/bin/g++
-#
-# If we're not building a shared library, use the disable-shared tag with
-# libtool. This will disable the building of objects for shared libraries and
-# only generate static library objects.
-#
-# For dynamic libraries, we'll take the performance hit for now, since we
-# almost never build them.
-#
-# This should speed up compilation and require no modifications to future
-# versions of libtool.
-#
+# Need a better way to compute this.
+LLVMGCCLIBDIR := $(dir $(shell $(LLVMGCC) -print-file-name=libgcc.a))/
+
+#--------------------------------------------------------------------
+# Adjust to user's request
+#--------------------------------------------------------------------
+
+# Adjust LIBTOOL options for shared libraries, or not.
ifndef SHARED_LIBRARY
-LIBTOOL += --tag=disable-shared
+ LIBTOOL += --tag=disable-shared
+else
+ LDFLAGS += -rpath $(LIBDIR)
endif
-#
-# Verbosity levels
-#
+# Adjust settings for verbose mode
ifndef VERBOSE
-VERB := @
-LIBTOOL += --silent
+ VERB := @
+ LIBTOOL += --silent
+ AR += >/dev/null 2>/dev/null
+ CONFIGUREFLAGS += >$(BUILD_OBJ_DIR)/configure.out 2>&1
+else
+ CONFIGUREFLAGS :=
endif
-###########################################################################
-# Miscellaneous paths and commands (part deux):
-# This section defines various configuration macros, such as where
-# to find burg, tblgen, and libtool.
-###########################################################################
-
-#--------------------------------------------------------------------------
-# Utilities used while building the LLVM tree, which live in the utils dir
-#
-BURG := $(LLVMTOOLCURRENT)/burg
-RunBurg := $(BURG) $(BURG_OPTS)
-TBLGEN := $(LLVMTOOLCURRENT)/tblgen
-
-#--------------------------------------------------------------------------
-# The LLVM GCC front-end in C and C++ flavors
-#
-LLVMGCC := PATH=$(LLVMTOOLCURRENT):$(PATH) $(LLVMGCCDIR)/bin/gcc
-LCC1 := $(LLVMGCCDIR)/libexec/gcc/$(LLVMGCCARCH)/cc1
-LLVMGXX := PATH=$(LLVMTOOLCURRENT):$(PATH) $(LLVMGCCDIR)/bin/g++
-LCC1XX := $(LLVMGCCDIR)/libexec/gcc/$(LLVMGCCARCH)/cc1plus
-
-#--------------------------------------------------------------------------
-# Some of the compiled LLVM tools which are used for compilation of runtime
-# libraries.
-#
-LLVMAS := $(LLVMTOOLCURRENT)/llvm-as
-
-
-###########################################################################
-# Compile Time Flags
-###########################################################################
-
-#
-# Include both the project headers and the LLVM headers for compilation and
-# dependency computation.
-#
-# BUILD_OBJ_DIR : Files local to the particular object directory
-# (locallly generated header files).
-# BUILD_SRC_DIR : Files local to the particular source directory.
-# BUILD_SRC_ROOT/include : Files global to the project.
-# LLVM_OBJ_ROOT/include : config.h files generated by autoconf
-# LEVEL/include : config.h files for the project
-# LLVM_SRC_ROOT/include : Files global to LLVM.
-#
-CPPFLAGS += -I$(BUILD_OBJ_DIR) -I$(BUILD_SRC_DIR) -I$(LLVM_OBJ_ROOT)/include \
- -I$(BUILD_SRC_ROOT)/include -I$(LEVEL)/include \
- -I$(LLVM_SRC_ROOT)/include
-
# By default, strip symbol information from executable
ifndef KEEP_SYMBOLS
-STRIP = $(PLATFORMSTRIPOPTS)
-STRIP_WARN_MSG = "(without symbols)"
+ STRIP = $(PLATFORMSTRIPOPTS)
+ STRIP_WARN_MSG = "(without symbols)"
endif
-# Allow GNU extensions:
-CPPFLAGS += -D_GNU_SOURCE
-# Pull in limit macros from stdint.h, even in C++:
-CPPFLAGS += -D__STDC_LIMIT_MACROS
-
-CompileWarnings := -Wall -W -Wwrite-strings -Wno-unused
-CompileCommonOpts := $(CompileWarnings) -fshort-enums
-CompileOptimizeOpts := -O3 -DNDEBUG -finline-functions
-
-#
-# Compile commands with libtool.
-#
-Compile := $(LIBTOOL) --mode=compile $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $(CompileCommonOpts)
-CompileC := $(LIBTOOL) --mode=compile $(CC) -c $(CPPFLAGS) $(CFLAGS) $(CompileCommonOpts)
-
-# Compile a cpp file, don't link...
-CompileG := $(Compile) -g -D_DEBUG
-CompileO := $(Compile) $(CompileOptimizeOpts) -felide-constructors -fomit-frame-pointer
-CompileP := $(Compile) $(CompileOptimizeOpts) -felide-constructors $(PROFILE)
-
-# Compile a c file, don't link...
-CompileCG := $(CompileC) -g -D_DEBUG
-CompileCO := $(CompileC) $(CompileOptimizeOpts) -fomit-frame-pointer
-CompileCP := $(CompileC) $(CompileOptimizeOpts) $(PROFILE)
-
-###########################################################################
-# Link Time Options
-###########################################################################
-
-#
-# Link final executable
-# (Note that we always link with the C++ compiler).
-#
-Link := $(LIBTOOL) --mode=link $(CXX)
+# Adjust linker flags for building an executable
+ifdef TOOLNAME
+ LDFLAGS += -rpath $(TOOLDIR) -export-dynamic
+endif
-# link both projlib and llvmlib libraries
-LinkG := $(Link) -g -L$(PROJLIBDEBUGSOURCE) -L$(LLVMLIBDEBUGSOURCE) $(STRIP)
-LinkO := $(Link) -O3 -L$(PROJLIBRELEASESOURCE) -L$(LLVMLIBRELEASESOURCE)
-LinkP := $(Link) -O3 -L$(PROJLIBPROFILESOURCE) -L$(LLVMLIBPROFILESOURCE) $(PROFILE)
+#----------------------------------------------------------
+# Options To Invoke Tools
+#----------------------------------------------------------
-# TOOLLINKOPTSB to pass options to the linker like library search path etc
-# Note that this is different from TOOLLINKOPTS, these options
-# are passed to the linker *before* the USEDLIBS options are passed.
-# e.g. usage TOOLLINKOPTSB = -L/home/xxx/lib
-ifdef TOOLLINKOPTSB
-LinkG := $(LinkG) $(TOOLLINKOPTSB)
-LinkO := $(LinkO) $(TOOLLINKOPTSB)
-LinkP := $(LinkP) $(TOOLLINKOPTSB)
+CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused
+
+LDFLAGS += -L$(LIBDIR) -L$(LLVMLIBDIR)
+CPPFLAGS += -I$(BUILD_OBJ_DIR) \
+ -I$(BUILD_SRC_DIR) \
+ -I$(BUILD_SRC_ROOT)/include \
+ -I$(BUILD_OBJ_ROOT)/include \
+ -I$(LLVM_OBJ_ROOT)/include \
+ -I$(LLVM_SRC_ROOT)/include \
+ -D_GNU_SOURCE -D__STDC_LIMIT_MACROS
+
+Compile.C = $(CC) $(CPPFLAGS) $(CompileCommonOpts) -c $(CFLAGS)
+Compile.CXX = $(CXX) $(CPPFLAGS) $(CompileCommonOpts) $(CXXFLAGS) -c
+LTCompile.C = $(LIBTOOL) --mode=compile $(Compile.C)
+LTCompile.CXX = $(LIBTOOL) --tag=CXX --mode=compile $(Compile.CXX)
+BCCompile.CXX = $(LLVMGXX) $(CPPFLAGS) $(CompileCommonOpts) $(CXXFLAGS) -c
+BCCompile.C = $(LLVMGCC) $(CPPFLAGS) $(CompileCommonOpts) $(CFLAGS) -c
+Link = $(LIBTOOL) --tag=CXX --mode=link $(CXX) $(CPPFLAGS) \
+ $(CompileCommonOpts) $(LDFLAGS) $(STRIP)
+Relink = $(LIBTOOL) --tag=CXX --mode=link $(CXX) $(CPPFLAGS) \
+ $(CompileCommonOpts)
+BCLinkLib = $(LLVMGCC) -shared -nostdlib
+Burg = $(BURG) -I $(BUILD_SRC_DIR)
+TableGen = $(TBLGEN) -I $(BUILD_SRC_DIR)
+Archive = $(AR) $(ARFLAGS)
+ifdef RANLIB
+Ranlib = $(RANLIB)
+else
+Ranlib = ranlib
endif
-# Create one .o file from a bunch of .o files...
-Relink := ${LIBTOOL} --mode=link $(CXX)
-
-#
-# Configure where the item being compiled should go.
-#
-ifdef SHARED_LIBRARY
-Link += -rpath $(DESTLIBCURRENT)
+#----------------------------------------------------------
+# Get the list of source files
+#----------------------------------------------------------
+ifndef SOURCES
+SOURCES := $(notdir $(wildcard $(BUILD_SRC_DIR)/*.cpp \
+ $(BUILD_SRC_DIR)/*.cc $(BUILD_SRC_DIR)/*.c $(BUILD_SRC_DIR)/*.y \
+ $(BUILD_SRC_DIR)/*.l))
endif
-ifdef TOOLNAME
-Link += -rpath $(DESTTOOLCURRENT)
+ifdef BUILT_SOURCES
+SOURCES += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES))
endif
-# Create dependency file from CPP file, send to stdout.
-Depend := $(CXX) -MM -I$(LEVEL)/include $(CPPFLAGS)
-DependC := $(CC) -MM -I$(LEVEL)/include $(CPPFLAGS)
+#----------------------------------------------------------
+# Types of objects that can be built from sources
+#----------------------------------------------------------
+BASENAME_SOURCES := $(sort $(basename $(SOURCES)))
+ObjectsO := $(BASENAME_SOURCES:%=$(OBJDIR)/%.o)
+ObjectsLO := $(BASENAME_SOURCES:%=$(OBJDIR)/%.lo)
+ObjectsBC := $(BASENAME_SOURCES:%=$(OBJDIR)/%.bc)
-# Archive a bunch of .o files into a .a file...
-AR = ${AR_PATH} cq
-#----------------------------------------------------------
+###############################################################################
+# DIRECTORIES: Handle recursive descent of directory structure
+###############################################################################
-# Source includes all of the cpp files, and objects are derived from the
-# source files...
-# The local Makefile can list other Source files via ExtraSource = ...
-#
-ifndef Source
-Source := $(notdir $(ExtraSource) $(wildcard $(SourceDir)/*.cpp \
- $(SourceDir)/*.c $(SourceDir)/*.y $(SourceDir)/*.l))
-endif
+#---------------------------------------------------------
+# Provide rules to make install dirs. This must be early
+# in the file so they get built before dependencies
+#---------------------------------------------------------
-#
-# Libtool Objects
-#
-Srcs := $(sort $(basename $(Source)))
-Objs := $(addsuffix .lo, $(Srcs))
-ObjectsO := $(addprefix $(BUILD_OBJ_DIR)/Release/,$(Objs))
-ObjectsP := $(addprefix $(BUILD_OBJ_DIR)/Profile/,$(Objs))
-ObjectsG := $(addprefix $(BUILD_OBJ_DIR)/Debug/,$(Objs))
-ObjectsBC := $(addprefix $(BUILD_OBJ_DIR)/BytecodeObj/,$(addsuffix .bc, $(Srcs)))
+$(bindir):
+ $(VERB) $(MKDIR) $(bindir)
+
+$(libdir):
+ $(VERB) $(MKDIR) $(libdir)
+
+$(bytecode_libdir):
+ $(VERB) $(MKDIR) $(bytecode_libdir)
+
+$(sysconfdir):
+ $(VERB) $(MKDIR) $(sysconfdir)
-#
-# The real objects underlying the libtool objects
-#
-RObjs := $(sort $(patsubst Debug/%.o, %.o, $(addsuffix .o,$(basename $(Source)))))
-RObjectsO := $(addprefix $(BUILD_OBJ_DIR)/Release/,$(RObjs))
-RObjectsP := $(addprefix $(BUILD_OBJ_DIR)/Profile/,$(RObjs))
-RObjectsG := $(addprefix $(BUILD_OBJ_DIR)/Debug/,$(RObjs))
#---------------------------------------------------------
-# Handle the DIRS and PARALLEL_DIRS options
+# Handle the DIRS options for sequential construction
#---------------------------------------------------------
+SUBDIRS :=
ifdef DIRS
-all install clean test bytecode ::
- $(VERB) for dir in ${DIRS}; do \
- $(MKDIR) $$dir; \
- if [ ! -f $$dir/Makefile ]; \
- then \
- cp $(SourceDir)/$$dir/Makefile $$dir/Makefile; \
- fi; \
- ($(MAKE) -C $$dir $@) || exit 1; \
+SUBDIRS += $(DIRS)
+$(RECURSIVE_TARGETS)::
+ $(VERB) for dir in $(DIRS); do \
+ if [ ! -f $$dir/Makefile ]; then \
+ $(MKDIR) $$dir; \
+ cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ fi; \
+ ($(MAKE) -C $$dir $@ ) || exit 1; \
done
endif
-# Handle PARALLEL_DIRS
+#---------------------------------------------------------
+# Handle the EXPERIMENTAL_DIRS options ensuring success
+# after each directory is built.
+#---------------------------------------------------------
+ifdef EXPERIMENTAL_DIRS
+$(RECURSIVE_TARGETS)::
+ $(VERB) for dir in $(EXPERIMENTAL_DIRS); do \
+ if [ ! -f $$dir/Makefile ]; then \
+ $(MKDIR) $$dir; \
+ cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ fi; \
+ ($(MAKE) -C $$dir $@ ) || exit 0; \
+ done
+endif
+
+#---------------------------------------------------------
+# Handle the PARALLEL_DIRS options for parallel construction
+#---------------------------------------------------------
ifdef PARALLEL_DIRS
+
+SUBDIRS += $(PARALLEL_DIRS)
+# Unfortunately, this list must be maintained if new
+# recursive targets are added.
all :: $(addsuffix /.makeall , $(PARALLEL_DIRS))
-install :: $(addsuffix /.makeinstall , $(PARALLEL_DIRS))
clean :: $(addsuffix /.makeclean , $(PARALLEL_DIRS))
-test :: $(addsuffix /.maketest , $(PARALLEL_DIRS))
-bytecode :: $(addsuffix /.makebytecode, $(PARALLEL_DIRS))
+check :: $(addsuffix /.makecheck , $(PARALLEL_DIRS))
+install :: $(addsuffix /.makeinstall , $(PARALLEL_DIRS))
+uninstall:: $(addsuffix /.makeuninstall,$(PARALLEL_DIRS))
-%/.makeall %/.makeinstall %/.makeclean %/.maketest %/.makebytecode:
- $(VERB) $(MKDIR) $(@D); cp $(SourceDir)/$(@D)/Makefile $(@D); $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@)
+Parallel_Targets := $(foreach T,$(RECURSIVE_TARGETS),%/.make$(T))
+
+$(Parallel_Targets) :
+ $(VERB) if [ ! -f $(@D)/Makefile ]; then \
+ $(MKDIR) $(@D); \
+ cp $(BUILD_SRC_DIR)/$(@D)/Makefile $(@D)/Makefile; \
+ fi; \
+ $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@)
endif
-# Handle directories that may or may not exist
+#---------------------------------------------------------
+# Handle the OPTIONAL_DIRS options for directores that may
+# or may not exist.
+#---------------------------------------------------------
ifdef OPTIONAL_DIRS
-all install clean test bytecode ::
- $(VERB) for dir in ${OPTIONAL_DIRS}; do \
- if [ -d $(SourceDir)/$$dir ]; \
- then\
- $(MKDIR) $$dir; \
- if [ ! -f $$dir/Makefile ]; \
- then \
- cp $(SourceDir)/$$dir/Makefile $$dir/Makefile; \
- fi; \
- ($(MAKE) -C$$dir $@) || exit 1; \
- fi \
+
+SUBDIRS += $(OPTIONAL_DIRS)
+
+$(RECURSIVE_TARGETS)::
+ $(VERB) for dir in $(OPTIONAL_DIRS); do \
+ if [ -d $(BUILD_SRC_DIR)/$$dir ]; then\
+ if [ ! -f $$dir/Makefile ]; then \
+ $(MKDIR) $$dir; \
+ cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ fi; \
+ ($(MAKE) -C$$dir $@ ) || exit 1; \
+ fi \
done
endif
-###########################################################################
-# Library Build Rules:
-#
#---------------------------------------------------------
-# Handle the LIBRARYNAME option - used when building libs...
+# Handle the CONFIG_FILES options
#---------------------------------------------------------
-#
-# When libraries are built, they are allowed to optionally define the
-# DONT_BUILD_RELINKED make variable, which, when defined, prevents a .o file
-# from being built for the library. This .o files may then be linked to by a
-# tool if the tool does not need (or want) the semantics a .a file provides
-# (linking in only object files that are "needed"). If a library is never to
-# be used in this way, it is better to define DONT_BUILD_RELINKED, and define
-# BUILD_ARCHIVE instead.
-#
-# Some libraries must be built as .a files (libscalar for example) because if
-# it's built as a .o file, then all of the constituent .o files in it will be
-# linked into tools (for example gccas) even if they only use one of the parts
-# of it. For this reason, sometimes it's useful to use libraries as .a files.
-###########################################################################
+ifdef CONFIG_FILES
+install-local:: $(sysconfdir) $(CONFIG_FILES)
+ $(VERB)$(ECHO) Installing Configuration Files To $(sysconfdir)
+ $(VERB)for file in $(CONFIG_FILES); do \
+ $(INSTALL) $(BUILD_SRC_DIR)/$${file} $(sysconfdir) ; \
+ done
+
+uninstall-local::
+ $(VERB)$(ECHO) Uninstalling Configuration Files From $(sysconfdir)
+ $(VERB)for file in $(CONFIG_FILES); do \
+ $(RM) -f $(sysconfdir)/$${file} ; \
+ done
+
+endif
+
+###############################################################################
+# Library Build Rules: Four ways to build a library
+###############################################################################
+
+
+# if we're building a library ...
ifdef LIBRARYNAME
# Make sure there isn't any extranous whitespace on the LIBRARYNAME option
LIBRARYNAME := $(strip $(LIBRARYNAME))
+LIBNAME_LA := $(LIBDIR)/lib$(LIBRARYNAME).la
+LIBNAME_A := $(LIBDIR)/lib$(LIBRARYNAME).a
+LIBNAME_O := $(LIBDIR)/$(LIBRARYNAME).o
+LIBNAME_BC := $(LIBDIR)/lib$(LIBRARYNAME).bc
-LIBNAME_O := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).so
-LIBNAME_P := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).so
-LIBNAME_G := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).so
-LIBNAME_AO := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).a
-LIBNAME_AP := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).a
-LIBNAME_AG := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).a
-LIBNAME_OBJO := $(DESTLIBRELEASE)/$(LIBRARYNAME).o
-LIBNAME_OBJP := $(DESTLIBPROFILE)/$(LIBRARYNAME).o
-LIBNAME_OBJG := $(DESTLIBDEBUG)/$(LIBRARYNAME).o
-LIBNAME_BC := $(DESTLIBBYTECODE)/lib$(LIBRARYNAME).bc
-
-#--------------------------------------------------------------------
-# Library Targets
-# Modify the top level targets to build the desired libraries.
-#--------------------------------------------------------------------
+#---------------------------------------------------------
+# Shared Library Targets:
+# If the user asked for a shared library to be built
+# with the SHARED_LIBRARY variable, then we provide
+# targets for building them.
+#---------------------------------------------------------
+ifdef SHARED_LIBRARY
-# dynamic target builds a shared object version of the library...
-dynamic:: $(DESTLIBCURRENT)/lib$(LIBRARYNAME).so
-bytecodelib:: $(LIBNAME_BC)
-bytecodelib-install:: $(LLVMGCCDIR)/bytecode-libs/lib$(LIBRARYNAME).bc
+all-local:: $(LIBNAME_LA)
-$(LLVMGCCDIR)/bytecode-libs/lib$(LIBRARYNAME).bc: $(LIBNAME_BC)
- @${ECHO} ======= Installing $(LIBRARYNAME) bytecode library =======
- cp $< $@
+$(LIBNAME_LA): $(BUILT_SOURCES) $(ObjectsLO) $(LIBDIR)/.dir
+ @$(ECHO) Linking $(CONFIGURATION) Shared Library $(notdir $@)
+ $(VERB) $(Link) -o $@ $(ObjectsLO)
+ $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $@ $(LIBDIR)
-# Does the library want a .o version built?
-ifndef DONT_BUILD_RELINKED
-all:: $(DESTLIBCURRENT)/$(LIBRARYNAME).o
+clean-local::
+ifneq ($(strip $(LIBNAME_LA)),)
+ $(VERB) $(RM) -f $(LIBNAME_LA)
endif
-# Does the library want an archive version built?
-ifdef BUILD_ARCHIVE
-all:: $(DESTLIBCURRENT)/lib$(LIBRARYNAME).a
+DestSharedLib = $(libdir)/lib$(LIBRARYNAME)$(SHLIBEXT)
+
+install-local:: $(DestSharedLib)
+
+$(DestSharedLib): $(libdir) $(LIBNAME_LA)
+ @$(ECHO) Installing $(CONFIGURATION) Shared Library $(DestSharedLib)
+ $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_LA) $(DestSharedLib)
+ $(VERB) $(LIBTOOL) --finish $(libdir)
+
+uninstall-local::
+ @$(ECHO) Uninstalling $(CONFIGURATION) Shared Library $(DestSharedLib)
+ $(VERB) $(RM) -f $(DestSharedLib)
+
endif
-#--------------------------------------------------------------------
-# Rules for building libraries
-#--------------------------------------------------------------------
+#---------------------------------------------------------
+# Bytecode Library Targets:
+# If the user asked for a bytecode library to be built
+# with the BYTECODE_LIBRARY variable, then we provide
+# targets for building them.
+#---------------------------------------------------------
+ifdef BYTECODE_LIBRARY
-LinkBCLib := $(LLVMGCC) -shared -nostdlib
ifdef EXPORTED_SYMBOL_LIST
-LinkBCLib += -Xlinker -internalize-public-api-list=$(EXPORTED_SYMBOL_LIST)
+ BCLinkLib += -Xlinker -internalize-public-api-list=$(EXPORTED_SYMBOL_LIST)
else
ifdef EXPORTED_SYMBOL_FILE
-LinkBCLib += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
+ BCLinkLib += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
else
-LinkBCLib += -Xlinker -disable-internalize
+ BCLinkLib += -Xlinker -disable-internalize
endif
endif
+all-local:: $(LIBNAME_BC)
-# Rule for building bytecode libraries.
-$(LIBNAME_BC): $(ObjectsBC) $(LibSubDirs) $(DESTLIBBYTECODE)/.dir
- @${ECHO} Linking $(LIBRARYNAME) bytecode library
- $(VERB) $(LinkBCLib) -o $@ $(ObjectsBC) $(LibSubDirs) $(LibLinkOpts)
- @${ECHO} ======= Finished building $(LIBRARYNAME) bytecode library =======
-#
-# Rules for building dynamically linked libraries.
-#
-$(LIBNAME_O): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir
- @${ECHO} Linking $(LIBRARYNAME) dynamic release library
- $(VERB) $(Link) -o $*.la $(ObjectsO) $(LibSubDirs) $(LibLinkOpts)
- $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $*.la $(DESTLIBCURRENT)
- @${ECHO} ======= Finished building $(LIBRARYNAME) dynamic release library =======
-
-$(LIBNAME_P): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir
- @${ECHO} Linking $(LIBRARYNAME) dynamic profile library
- $(VERB) $(Link) -o $*.la $(ObjectsP) $(LibSubDirs) $(LibLinkOpts)
- $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $*.la $(DESTLIBCURRENT)
- @${ECHO} ======= Finished building $(LIBRARYNAME) dynamic profile library =======
-
-$(LIBNAME_G): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
- @${ECHO} Linking $(LIBRARYNAME) dynamic debug library
- $(VERB) $(Link) -o $*.la $(ObjectsG) $(LibSubDirs) $(LibLinkOpts)
- $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $*.la $(DESTLIBCURRENT)
- @${ECHO} ======= Finished building $(LIBRARYNAME) dynamic debug library =======
+$(LIBNAME_BC): $(BUILT_SOURCES) $(ObjectsBC) $(LIBDIR)/.dir
+ @$(ECHO) Linking $(CONFIGURATION) Bytecode Library $(notdir $@)
+ $(VERB) $(BCLinkLib) -o $@ $(ObjectsBC)
-#
-# Rules for building static archive libraries.
-#
-$(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir
- @${ECHO} Linking $(LIBRARYNAME) archive release library
- @$(RM) -f $@
- $(VERB) $(Link) -03 -o $@ $(ObjectsO) $(LibSubDirs) -static
- @${ECHO} Finished building $(LIBRARYNAME) archive release library =======
+clean-local::
+ifneq ($(strip $(LIBNAME_BC)),)
+ $(VERB) $(RM) -f $(LIBNAME_BC)
+endif
-$(LIBNAME_AP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir
- @${ECHO} Linking $(LIBRARYNAME) archive profile library
- @$(RM) -f $@
- $(VERB) $(Link) -03 $(PROFILE) -o $@ $(ObjectsP) $(LibSubDirs) -static
- @${ECHO} ======= Finished building $(LIBRARYNAME) archive profile library =======
+DestBytecodeLib = $(bytecode_libdir)/lib$(LIBRARYNAME).bc
-$(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
- @${ECHO} Linking $(LIBRARYNAME) archive debug library
- @$(RM) -f $@
- $(VERB) $(Link) -g $(STRIP) -o $@ $(ObjectsG) $(LibSubDirs) -static
- @${ECHO} ======= Finished building $(LIBRARYNAME) archive debug library =======
+install-local:: $(DestBytecodeLib)
+$(DestBytecodeLib): $(bytecode_libdir) $(LIBNAME_BC)
+ @$(ECHO) Installing $(CONFIGURATION) Bytecode Library $(DestBytecodeLib)
+ $(VERB) $(INSTALL) $(LIBNAME_BC) $@
-#
-# Rules for building .o libraries.
-#
-# JTC:
-# Note that for this special case, we specify the actual object files
-# instead of their libtool counterparts. This is because libtool
-# doesn't want to generate a reloadable object file unless it is given
-# .o files explicitly.
-#
-# Note that we're making an assumption here: If we build a .lo file,
-# it's corresponding .o file will be placed in the same directory.
-#
-# I think that is safe.
-#
-$(LIBNAME_OBJO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir
- @${ECHO} "Linking `basename $@`"
- $(VERB) $(Relink) -o $@ $(RObjectsO) $(LibSubDirs)
+uninstall-local::
+ @$(ECHO) Uninstalling $(CONFIGURATION) Bytecode Library $(DestBytecodeLib)
+ $(VERB) $(RM) -f $(DestBytecodeLib)
+
+endif
-$(LIBNAME_OBJP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir
- @${ECHO} "Linking `basename $@`"
- $(VERB) $(Relink) -o $@ $(RObjectsP) $(LibSubDirs)
+# Does the library want a .o version built?
+ifndef DONT_BUILD_RELINKED
+all-local:: $(LIBNAME_O)
-$(LIBNAME_OBJG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
- @${ECHO} "Linking `basename $@`"
- $(VERB) $(Relink) -o $@ $(RObjectsG) $(LibSubDirs)
+$(LIBNAME_O): $(BUILT_SOURCES) $(ObjectsO) $(LIBDIR)/.dir
+ @$(ECHO) Linking $(CONFIGURATION) Object Library $(notdir $@)
+ $(VERB) $(Relink) -o $@ $(ObjectsO)
+clean-local::
+ifneq ($(strip $(LIBNAME_O)),)
+ $(VERB) $(RM) -f $(LIBNAME_O)
endif
-#------------------------------------------------------------------------
-# Create a TAGS database for emacs
-#------------------------------------------------------------------------
+DestRelinkedLib = $(libdir)/$(LIBRARYNAME).o
+
+install-local:: $(DestRelinkedLib)
-ifneq ($(ETAGS),false)
-ifeq ($(LEVEL), .)
-SRCDIRS := $(wildcard $(SourceDir)/include $(SourceDir)/lib $(SourceDir)/tools)
+$(DestRelinkedLib): $(libdir) $(LIBNAME_O)
+ @$(ECHO) Installing $(CONFIGURATION) Object Library $(DestRelinkedLib)
+ $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_O) $(DestRelinkedLib)
+
+uninstall-local::
+ @$(ECHO) Uninstalling $(CONFIGURATION) Object Library $(DestRelinkedLib)
+ $(VERB) $(RM) -f $(DestRelinkedLib)
-tags:
- $(ETAGS) -l c++ `find $(SRCDIRS) -name '*.cpp' -o -name '*.h'`
-all:: tags
endif
-else
-tags:
- ${ECHO} "Cannot build $@: The program etags is not installed"
+
+# Does the library want an archive version built?
+ifdef BUILD_ARCHIVE
+all-local:: $(LIBNAME_A)
+
+$(LIBNAME_A): $(BUILT_SOURCES) $(ObjectsO) $(LIBDIR)/.dir
+ @$(ECHO) Building $(CONFIGURATION) Archive Library $(notdir $@)
+ $(VERB)$(RM) -f $@
+ $(VERB) $(Archive) $@ $(ObjectsO)
+ $(VERB) $(Ranlib) $@
+
+clean-local::
+ifneq ($(strip $(LIBNAME_A)),)
+ $(VERB) $(RM) -f $(LIBNAME_A)
endif
-#------------------------------------------------------------------------
-# Handle the TOOLNAME option - used when building tool executables...
-#------------------------------------------------------------------------
-#
-# The TOOLNAME option should be used with a USEDLIBS variable that tells the
-# libraries (and the order of the libs) that should be linked to the
-# tool. USEDLIBS should contain a list of library names (some with .a extension)
-# that are automatically linked in as .o files unless the .a suffix is added.
-#
-ifdef TOOLNAME
+DestArchiveLib := $(libdir)/lib$(LIBRARYNAME).a
-# TOOLEXENAME* - These compute the output filenames to generate...
-TOOLEXENAME_G := $(DESTTOOLDEBUG)/$(TOOLNAME)
-TOOLEXENAME_O := $(DESTTOOLRELEASE)/$(TOOLNAME)
-TOOLEXENAME_P := $(DESTTOOLPROFILE)/$(TOOLNAME)
-TOOLEXENAMES := $(DESTTOOLCURRENT)/$(TOOLNAME)
-
-# USED_LIBS_OPTIONS - Compute the options line that add -llib1 -llib2, etc.
-PROJ_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
-PROJ_LIBS_OPTIONS_G := $(patsubst %.o, $(PROJLIBDEBUGSOURCE)/%.o, $(PROJ_LIBS_OPTIONS))
-PROJ_LIBS_OPTIONS_O := $(patsubst %.o, $(PROJLIBRELEASESOURCE)/%.o,$(PROJ_LIBS_OPTIONS))
-PROJ_LIBS_OPTIONS_P := $(patsubst %.o, $(PROJLIBPROFILESOURCE)/%.o,$(PROJ_LIBS_OPTIONS))
-
-LLVM_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS)))
-LLVM_LIBS_OPTIONS_G := $(patsubst %.o, $(LLVMLIBDEBUGSOURCE)/%.o, $(LLVM_LIBS_OPTIONS))
-LLVM_LIBS_OPTIONS_O := $(patsubst %.o, $(LLVMLIBRELEASESOURCE)/%.o,$(LLVM_LIBS_OPTIONS))
-LLVM_LIBS_OPTIONS_P := $(patsubst %.o, $(LLVMLIBPROFILESOURCE)/%.o,$(LLVM_LIBS_OPTIONS))
-
-LIB_OPTS_G := $(LLVM_LIBS_OPTIONS_G) $(PROJ_LIBS_OPTIONS_G)
-LIB_OPTS_O := $(LLVM_LIBS_OPTIONS_O) $(PROJ_LIBS_OPTIONS_O)
-LIB_OPTS_P := $(LLVM_LIBS_OPTIONS_P) $(PROJ_LIBS_OPTIONS_P)
-
-# USED_LIB_PATHS - Compute the path of the libraries used so that tools are
-# rebuilt if libraries change. This has to make sure to handle .a/.so and .o
-# files separately.
-#
-STATICUSEDLIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
-USED_LIB_PATHS_G := $(addprefix $(DESTLIBDEBUG)/, $(STATICUSEDLIBS))
-USED_LIB_PATHS_O := $(addprefix $(DESTLIBRELEASE)/, $(STATICUSEDLIBS))
-USED_LIB_PATHS_P := $(addprefix $(DESTLIBPROFILE)/, $(STATICUSEDLIBS))
+install-local:: $(DestArchiveLib)
-#
-# Libtool link options:
-# Ensure that all binaries have their symbols exported so that they can
-# by dlsym'ed.
-#
-LINK_OPTS := -export-dynamic $(TOOLLINKOPTS)
+$(DestArchiveLib): $(libdir) $(LIBNAME_A)
+ @$(ECHO) Installing $(CONFIGURATION) Archive Library $(DestArchiveLib)
+ $(VERB) $(MKDIR) $(libdir)
+ $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_A) $(DestArchiveLib)
+
+uninstall-local::
+ @$(ECHO) Uninstalling $(CONFIGURATION) Archive Library $(DestArchiveLib)
+ $(VERB) $(RM) -f $(DestArchiveLib)
+endif
+# endif LIBRARYNAME
+endif
+###############################################################################
+# Tool Build Rules: Build executable tool based on TOOLNAME option
+###############################################################################
+
+ifdef TOOLNAME
+# TOOLEXENAME - This is the output filenames to generate
+TOOLEXENAME := $(TOOLDIR)/$(TOOLNAME)
+
+# LIBS_OPTIONS - Compute the options lines that add -llib1 -llib2, etc.
+PROJ_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
+PROJ_LIBS_OPTIONS := $(patsubst %.o, $(LIBDIR)/%.o, $(PROJ_LIBS_OPTIONS))
+LLVM_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS)))
+LLVM_LIBS_OPTIONS := $(patsubst %.o, $(LLVMLIBDIR)/%.o, $(LLVM_LIBS_OPTIONS))
+
+# USED_LIBS/LIBS_PATHS - Compute dependent library file paths
+PROJ_USED_LIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
+LLVM_USED_LIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS)))
+PROJ_LIBS_PATHS := $(addprefix $(LIBDIR)/,$(PROJ_USED_LIBS))
+LLVM_LIBS_PATHS := $(addprefix $(LLVMLIBDIR)/,$(LLVM_USED_LIBS))
+
+# Handle compression libraries automatically
+ifeq ($(HAVE_BZIP2),1)
+LIBS += -lbz2
+endif
+ifeq ($(HAVE_ZLIB),1)
+LIBS += -lz
+endif
# Tell make that we need to rebuild subdirectories before we can link the tool.
# This affects things like LLI which has library subdirectories.
-$(USED_LIB_PATHS_G) $(USED_LIB_PATHS_O) $(USED_LIB_PATHS_P): \
- $(addsuffix /.makeall, $(PARALLEL_DIRS))
+$(TOOLEXENAME): $(addsuffix /.makeall, $(PARALLEL_DIRS))
+
+all-local:: $(TOOLEXENAME)
+
+clean-local::
+ifneq ($(strip $(TOOLEXENAME)),)
+ $(VERB) $(RM) -f $(TOOLEXENAME)
+endif
+
+$(TOOLEXENAME): $(BUILT_SOURCES) $(ObjectsO) $(PROJ_LIBS_PATHS) $(LLVM_LIBS_PATHS) $(TOOLDIR)/.dir
+ @$(ECHO) Linking $(CONFIGURATION) executable $(TOOLNAME) $(STRIP_WARN_MSG)
+ $(VERB) $(Link) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(PROJ_LIBS_OPTIONS) \
+ $(LLVM_LIBS_OPTIONS) $(LIBS) $(TOOLLINKOPTSB)
+ @$(ECHO) ======= Finished Linking $(CONFIGURATION) Executable $(TOOLNAME) $(STRIP_WARN_MSG)
-all:: $(TOOLEXENAMES)
+DestTool = $(bindir)/$(TOOLNAME)
-clean::
- $(VERB) $(RM) -f $(TOOLEXENAMES)
+install-local:: $(DestTool)
-$(TOOLEXENAME_G): $(ObjectsG) $(USED_LIB_PATHS_G) $(DESTTOOLDEBUG)/.dir
- @${ECHO} Linking $(TOOLNAME) debug executable $(STRIP_WARN_MSG)
- $(VERB) $(LinkG) -o $@ $(ObjectsG) $(LIB_OPTS_G) $(LINK_OPTS) $(LIBS)
- @${ECHO} ======= Finished building $(TOOLNAME) debug executable $(STRIP_WARN_MSG) =======
+$(DestTool): $(bindir) $(TOOLEXENAME)
+ @$(ECHO) Installing $(CONFIGURATION) $(DestTool)
+ $(VERB) $(INSTALL) $(TOOLEXENAME) $(DestTool)
-$(TOOLEXENAME_O): $(ObjectsO) $(USED_LIB_PATHS_O) $(DESTTOOLRELEASE)/.dir
- @${ECHO} Linking $(TOOLNAME) release executable
- $(VERB) $(LinkO) -o $@ $(ObjectsO) $(LIB_OPTS_O) $(LINK_OPTS) $(LIBS)
- @${ECHO} ======= Finished building $(TOOLNAME) release executable =======
+uninstall-local::
+ @$(ECHO) Uninstalling $(CONFIGURATION) $(DestTool)
+ $(VERB) $(RM) -f $(DestTool)
-$(TOOLEXENAME_P): $(ObjectsP) $(USED_LIB_PATHS_P) $(DESTTOOLPROFILE)/.dir
- @${ECHO} Linking $(TOOLNAME) profile executable
- $(VERB) $(LinkP) -o $@ $(ObjectsP) $(LIB_OPTS_P) $(LINK_OPTS) $(LIBS)
- @${ECHO} ======= Finished building $(TOOLNAME) profile executable =======
+endif
+
+ifndef DISABLE_AUTO_DEPENDENCIES
+
+# Create .lo files in the OBJDIR directory from the .cpp and .c files...
+ifdef SHARED_LIBRARY
+
+$(OBJDIR)/%.lo $(OBJDIR)/%.o: %.cpp $(OBJDIR)/.dir
+ @$(ECHO) "Compiling $*.cpp (PIC)"
+ $(VERB) if $(LTCompile.CXX) -MD -MT $@ -MP -MF $(OBJDIR)/$*.LACXXd $< -o $@ ; \
+ then $(MV) -f "$(OBJDIR)/$*.LACXXd" "$(OBJDIR)/$*.d"; \
+ else $(RM) -f "$(OBJDIR)/$*.LACXXd"; exit 1; fi
+
+$(OBJDIR)/%.lo $(OBJDIR)/%.o: %.c $(OBJDIR)/.dir
+ @$(ECHO) "Compiling $*.c (PIC)"
+ $(VERB) if $(LTCompile.C) -MD -MT $@ -MP -MF $(OBJDIR)/$*.LACd $< -o $@ ; \
+ then $(MV) -f "$(OBJDIR)/$*.LACd" "$(OBJDIR)/$*.d"; \
+ else $(RM) -f "$(OBJDIR)/$*.LACd"; exit 1; fi
+
+else
+
+$(OBJDIR)/%.o: %.cpp $(OBJDIR)/.dir
+ @$(ECHO) "Compiling $*.cpp"
+ $(VERB) if $(Compile.CXX) -MD -MT $@ -MP -MF $(OBJDIR)/$*.CXXd $< -o $@ ; \
+ then $(MV) -f "$(OBJDIR)/$*.CXXd" "$(OBJDIR)/$*.d"; \
+ else $(RM) -f "$(OBJDIR)/$*.CXXd"; exit 1; fi
+
+$(OBJDIR)/%.o: %.c $(OBJDIR)/.dir
+ @$(ECHO) "Compiling $*.c"
+ $(VERB) if $(Compile.C) -MD -MT $@ -MP -MF $(OBJDIR)/$*.Cd $< -o $@ ; \
+ then $(MV) -f "$(OBJDIR)/$*.Cd" "$(OBJDIR)/$*.d"; \
+ else $(RM) -f "$(OBJDIR)/$*.Cd"; exit 1; fi
endif
+# Create .bc files in the OBJDIR directory from .cpp and .c files...
+$(OBJDIR)/%.bc: %.cpp $(OBJDIR)/.dir
+ @$(ECHO) "Compiling $*.cpp (bytecode)"
+ $(VERB) if $(BCCompile.CXX) -MD -MT $@ -MP -MF "$(OBJDIR)/$*.BCCXXd" $< -o $@ ; \
+ then $(MV) -f "$(OBJDIR)/$*.BCCXXd" "$(OBJDIR)/$*.d"; \
+ else $(RM) -f "$(OBJDIR)/$*.BCCXXd"; exit 1; fi
+$(OBJDIR)/%.bc: %.c $(OBJDIR)/.dir
+ @$(ECHO) "Compiling $*.c (bytecode)"
+ $(VERB) if $(BCCompile.C) -MD -MT $@ -MP -MF "$(OBJDIR)/$*.BCCd" $< -o $@ ; \
+ then $(MV) -f "$(OBJDIR)/$*.BCCd" "$(OBJDIR)/$*.d"; \
+ else $(RM) -f "$(OBJDIR)/$*.BCCd"; exit 1; fi
-#---------------------------------------------------------
-.PRECIOUS: $(BUILD_OBJ_DIR)/Depend/.dir $(BUILD_OBJ_DIR)/BytecodeObj/.dir
-.PRECIOUS: $(BUILD_OBJ_DIR)/Debug/.dir $(BUILD_OBJ_DIR)/Release/.dir
+else
-# Create .lo files in the ObjectFiles directory from the .cpp and .c files...
-$(BUILD_OBJ_DIR)/Release/%.lo: %.cpp $(BUILD_OBJ_DIR)/Release/.dir
- @${ECHO} "Compiling `basename $<`"
- $(VERB) $(CompileO) $< -o $@
+ifdef SHARED_LIBRARY
-$(BUILD_OBJ_DIR)/Release/%.lo: %.c $(BUILD_OBJ_DIR)/Release/.dir
- @${ECHO} "Compiling `basename $<`"
- $(VERB) $(CompileCO) $< -o $@
+$(OBJDIR)/%.lo $(OBJDIR)/%.o: %.cpp $(OBJDIR)/.dir
+ @$(ECHO) "Compiling $*.cpp (PIC)"
+ $(LTCompile.CXX) $< -o $@
-$(BUILD_OBJ_DIR)/Profile/%.lo: %.cpp $(BUILD_OBJ_DIR)/Profile/.dir
- @${ECHO} "Compiling `basename $<`"
- $(VERB) $(CompileP) $< -o $@
+$(OBJDIR)/%.lo $(OBJDIR)/%.o: %.c $(OBJDIR)/.dir
+ @$(ECHO) "Compiling $*.cpp (PIC)"
+ $(LTCompile.C) $< -o $@
-$(BUILD_OBJ_DIR)/Profile/%.lo: %.c $(BUILD_OBJ_DIR)/Profile/.dir
- @${ECHO} "Compiling `basename $<`"
- $(VERB) $(CompileCP) $< -o $@
+else
-$(BUILD_OBJ_DIR)/Debug/%.lo: %.cpp $(BUILD_OBJ_DIR)/Debug/.dir
- @${ECHO} "Compiling `basename $<`"
- $(VERB) $(CompileG) $< -o $@
+$(OBJDIR)/%.o: %.cpp $(OBJDIR)/.dir
+ @$(ECHO) "Compiling $*.cpp"
+ $(Compile.CXX) $< -o $@
-$(BUILD_OBJ_DIR)/Debug/%.lo: %.c $(BUILD_OBJ_DIR)/Debug/.dir
- @${ECHO} "Compiling `basename $<`"
- $(VERB) $(CompileCG) $< -o $@
+$(OBJDIR)/%.o: %.c $(OBJDIR)/.dir
+ @$(ECHO) "Compiling $*.cpp"
+ $(Compile.C) $< -o $@
+endif
+
+# Create .bc files in the OBJDIR directory from .cpp and .c files...
+$(OBJDIR)/%.bc: %.cpp $(OBJDIR)/.dir
+ @$(ECHO) "Compiling $*.cpp (bytecode)"
+ $(BCCompileCPP) $< -o $@
-$(BUILD_OBJ_DIR)/BytecodeObj/%.bc: %.cpp $(BUILD_OBJ_DIR)/BytecodeObj/.dir $(LCC1XX)
- @${ECHO} "Compiling `basename $<` to bytecode"
- $(VERB) $(LLVMGXX) $(CompileWarnings) $(CPPFLAGS) -c $< -o $@
+$(OBJDIR)/%.bc: %.c $(OBJDIR)/.dir
+ @$(ECHO) "Compiling $*.c (bytecode)"
+ $(BCCompileC) $< -o $@
-$(BUILD_OBJ_DIR)/BytecodeObj/%.bc: %.c $(BUILD_OBJ_DIR)/BytecodeObj/.dir $(LCC1)
- @${ECHO} "Compiling `basename $<` to bytecode"
- $(VERB) $(LLVMGCC) $(CompileWarnings) $(CPPFLAGS) -c $< -o $@
+endif
-$(BUILD_OBJ_DIR)/BytecodeObj/%.bc: %.ll $(BUILD_OBJ_DIR)/BytecodeObj/.dir $(LLVMAS)
- @${ECHO} "Compiling `basename $<` to bytecode"
+$(OBJDIR)/%.bc: %.ll $(OBJDIR)/.dir $(LLVMAS)
+ @$(ECHO) "Compiling $*.ll"
$(VERB) $(LLVMAS) $< -f -o $@
+ifdef TARGET
+
+TDFILES := $(strip $(wildcard $(BUILD_SRC_DIR)/*.td) $(LLVM_SRC_ROOT)/lib/Target/Target.td)
+INCFILES := $(filter %.inc,$(BUILT_SOURCES))
+
+$(INCFILES) : $(TBLGEN) $(TDFILES)
+
+%GenRegisterNames.inc : %.td
+ @$(ECHO) "Building $(<F) register names with tblgen"
+ $(VERB) $(TableGen) -gen-register-enums -o $@ $<
+
+%GenRegisterInfo.h.inc : %.td
+ @$(ECHO) "Building $(<F) register information header with tblgen"
+ $(VERB) $(TableGen) -gen-register-desc-header -o $@ $<
+
+%GenRegisterInfo.inc : %.td
+ @$(ECHO) "Building $(<F) register info implementation with tblgen"
+ $(VERB) $(TableGen) -gen-register-desc -o $@ $<
+
+%GenInstrNames.inc : %.td
+ @$(ECHO) "Building $(<F) instruction names with tblgen"
+ $(VERB) $(TableGen) -gen-instr-enums -o $@ $<
+
+%GenInstrInfo.inc : %.td
+ @$(ECHO) "Building $(<F) instruction information with tblgen"
+ $(VERB) $(TableGen) -gen-instr-desc -o $@ $<
+
+%GenAsmWriter.inc : %.td
+ @$(ECHO) "Building $(<F) assembly writer with tblgen"
+ $(VERB) $(TableGen) -gen-asm-writer -o $@ $<
+
+%GenATTAsmWriter.inc : %.td
+ @$(ECHO) "Building $(<F) AT&T assembly writer with tblgen"
+ $(VERB) $(TableGen) -gen-asm-writer -o $@ $<
+
+%GenIntelAsmWriter.inc : %.td
+ @$(ECHO) "Building $(<F) Intel assembly writer with tblgen"
+ $(VERB) $(TableGen) -gen-asm-writer -asmwriternum=1 -o $@ $<
+
+%GenInstrSelector.inc: %.td
+ @$(ECHO) "Building $(<F) instruction selector with tblgen"
+ $(VERB) $(TableGen) -gen-instr-selector -o $@ $<
+
+%GenCodeEmitter.inc:: %.td
+ @$(ECHO) "Building $(<F) code emitter with tblgen"
+ $(VERB) $(TableGen) -gen-emitter -o $@ $<
+
+clean-local::
+ $(VERB) rm -f *.inc
+
+endif
#
# Rules for building lex/yacc files
#
-LEX_FILES = $(filter %.l, $(Source))
+LEX_FILES = $(filter %.l, $(SOURCES))
LEX_OUTPUT = $(LEX_FILES:%.l=%.cpp)
-YACC_FILES = $(filter %.y, $(Source))
+YACC_FILES = $(filter %.y, $(SOURCES))
YACC_OUTPUT = $(addprefix $(YACC_FILES:%.y=%), .h .cpp .output)
.PRECIOUS: $(LEX_OUTPUT) $(YACC_OUTPUT)
# FIXME. (f.e. char Buffer[10000] )
#
%.cpp: %.l
- @${ECHO} Flexing $<
+ @$(ECHO) Flexing $<
$(VERB) $(FLEX) -t $< | \
- $(SED) '/^find_rule/d' | \
- $(SED) 's/void yyunput/inline void yyunput/' | \
- $(SED) 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \
- $(SED) 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' \
- > $@.tmp
- $(VERB) cmp -s $@ $@.tmp > /dev/null || ${MV} -f $@.tmp $@
- @# remove the output of flex if it didn't get moved over...
- @rm -f $@.tmp
+ $(SED) 's/void yyunput/inline void yyunput/' | \
+ $(SED) 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \
+ $(SED) 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' \
+ > $@
# Rule for building the bison parsers...
%.c: %.y # Cancel built-in rules for yacc
+%.cpp: %.y # Cancel built-in rules for yacc
%.h: %.y # Cancel built-in rules for yacc
%.cpp %.h : %.y
- @${ECHO} "Bisoning `basename $<`"
+ @$(ECHO) "Bisoning $*.y"
$(VERB) $(BISON) -v -d -p $(<F:%Parser.y=%) -o $*.tab.c $<
- $(VERB) cmp -s $*.tab.c $*.cpp > /dev/null || ${MV} -f $*.tab.c $*.cpp
- $(VERB) cmp -s $*.tab.h $*.h > /dev/null || ${MV} -f $*.tab.h $*.h
- @# If the files were not updated, don't leave them lying around...
- @rm -f $*.tab.c $*.tab.h
+ $(VERB) $(MV) -f $*.tab.c $*.cpp
+ $(VERB) $(MV) -f $*.tab.h $*.h
# To create the directories...
%/.dir:
- $(VERB) ${MKDIR} $* > /dev/null
+ $(VERB) $(MKDIR) $* > /dev/null
@$(DATE) > $@
+.PRECIOUS: $(OBJDIR)/.dir $(LIBDIR)/.dir $(TOOLDIR)/.dir $(LLVMLIBDIR)/.dir
+.PRECIOUS: $(LLVMTOOLDIR)/.dir
+
# To create postscript files from dot files...
ifneq ($(DOT),false)
%.ps: %.dot
- ${DOT} -Tps < $< > $@
+ $(DOT) -Tps < $< > $@
else
%.ps: %.dot
- ${ECHO} "Cannot build $@: The program dot is not installed"
+ $(ECHO) "Cannot build $@: The program dot is not installed"
endif
#
%.h:: ;
# 'make clean' nukes the tree
-clean::
- $(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/Debug $(BUILD_OBJ_DIR)/Release
- $(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/Profile $(BUILD_OBJ_DIR)/Depend
- $(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/BytecodeObj
- $(VERB) $(RM) -f core core.[0-9][0-9]* *.o *.d *.so *~ *.flc
- $(VERB) $(RM) -f $(LEX_OUTPUT) $(YACC_OUTPUT)
-
-###########################################################################
-# C/C++ Dependencies
-# Define variables and rules that generate header file dependencies
-# from C/C++ source files.
-###########################################################################
+clean-local::
+ifneq ($(strip $(OBJDIR)),)
+ $(VERB) $(RM) -rf $(OBJDIR)
+endif
+ $(VERB) $(RM) -f core core.[0-9][0-9]* *.o *.d *~ *.flc
+ifneq ($(strip $(SHLIBEXT)),) # Extra paranoia - make real sure SHLIBEXT is set
+ $(VERB) $(RM) -f *$(SHLIBEXT)
+endif
+ifneq ($(strip $(LEX_OUTPUT)),)
+ $(VERB) $(RM) -f $(LEX_OUTPUT)
+endif
+ifneq ($(strip $(YACC_OUTPUT)),)
+ $(VERB) $(RM) -f $(YACC_OUTPUT)
+endif
+###############################################################################
+# DEPENDENCIES: Include the dependency files if we should
+###############################################################################
ifndef DISABLE_AUTO_DEPENDENCIES
-# If dependencies were generated for the file that included this file,
-# include the dependencies now...
-#
-SourceBaseNames := $(basename $(Source))
-SourceDepend := $(SourceBaseNames:%=$(BUILD_OBJ_DIR)/Depend/%.d)
+# If its not one of the cleaning targets
+ifneq ($strip($(filter-out clean clean-local dist-clean, $(MAKECMDGOALS))),)
-# Create dependencies for the *.cpp files...
-$(BUILD_OBJ_DIR)/Depend/%.d: %.cpp $(BUILD_OBJ_DIR)/Depend/.dir
- $(VERB) $(Depend) $< | $(SED) 's|\.o:|\.lo:|' | $(SED) 's|$*\.lo *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@
+# Get the list of dependency files
+DependFiles := $(basename $(filter %.cpp %.c %.cc, $(SOURCES)))
+DependFiles := $(patsubst %,$(BUILD_OBJ_DIR)/$(CONFIGURATION)/%.d,$(DependFiles))
-# Create dependencies for the *.c files...
-$(BUILD_OBJ_DIR)/Depend/%.d: %.c $(BUILD_OBJ_DIR)/Depend/.dir
- $(VERB) $(DependC) -o $@ $< | $(SED) 's|\.o:|\.lo:|' | $(SED) 's|$*\.lo *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@
+-include /dev/null $(DependFiles)
-#
-# Autoconf Dependencies.
-#
-$(LLVM_OBJ_ROOT)/config.status:: $(LLVM_SRC_ROOT)/configure
- @${ECHO} "****************************************************************"
- @${ECHO} " You need to re-run $(LLVM_SRC_ROOT)/configure"
- @${ECHO} " in directory $(LLVM_OBJ_ROOT)"
- @${ECHO} "****************************************************************"
- $(VERB) exit 1
+endif
-# If the Makefile in the source tree has been updated, copy it over into the
-# build tree.
-Makefile :: $(BUILD_SRC_DIR)/Makefile
- @${ECHO} "===== Updating Makefile from source dir: `dirname $<` ====="
- cp -f $< $@
+endif # ifndef DISABLE_AUTO_DEPENDENCIES
-#
-# Include dependencies generated from C/C++ source files, but not if we
-# are cleaning (this example taken from the GNU Make Manual).
-#
-ifneq ($(MAKECMDGOALS),clean)
-ifneq ($(MAKECMDGOALS),distclean)
--include /dev/null $(SourceDepend)
+###############################################################################
+# Handle construction of a distribution tarball
+###############################################################################
+
+.PHONY: dist dist-chck dist-clean distdir dist-gzip dist-bzip2 dist-zip
+
+#------------------------------------------------------------------------
+# Define distribution related variables
+#------------------------------------------------------------------------
+DistName := $(LLVM_TARBALL_NAME)
+DistDir := $(BUILD_OBJ_ROOT)/$(DistName)
+TopDistDir := $(BUILD_OBJ_ROOT)/$(DistName)
+DistTarGZip := $(BUILD_OBJ_ROOT)/$(DistName).tar.gz
+DistZip := $(BUILD_OBJ_ROOT)/$(DistName).zip
+DistTarBZ2 := $(BUILD_OBJ_ROOT)/$(DistName).tar.bz2
+DistAlways := CREDITS.TXT LICENSE.TXT README.txt README AUTHORS COPYING \
+ ChangeLog INSTALL NEWS Makefile Makefile.common Makefile.rules \
+ Makefile.config.in configure autoconf
+DistOther := $(notdir $(wildcard \
+ $(BUILD_SRC_DIR)/*.h \
+ $(BUILD_SRC_DIR)/*.td \
+ $(BUILD_SRC_DIR)/*.def \
+ $(BUILD_SRC_DIR)/*.ll \
+ $(BUILD_SRC_DIR)/*.in))
+DistSources := $(SOURCES) $(EXTRA_DIST)
+DistSubDirs := $(SUBDIRS)
+DistFiles := $(DistAlways) $(DistSources) $(DistOther)
+
+
+#------------------------------------------------------------------------
+# We MUST build distribution with OBJ_DIR != SRC_DIR
+#------------------------------------------------------------------------
+ifeq ($(BUILD_SRC_DIR),$(BUILD_OBJ_DIR))
+dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip ::
+ @$(ECHO) ERROR: Target $@ only available with OBJ_DIR != SRC_DIR
+
+DistCheckTop :=
+else
+
+DistCheckTop := check
+#------------------------------------------------------------------------
+# Prevent catastrophic remove
+#------------------------------------------------------------------------
+ifeq ($(LLVM_TARBALL_NAME),)
+$(error LLVM_TARBALL_NAME is empty. Please rerun configure)
endif
+
+#------------------------------------------------------------------------
+# Prevent attempt to run dist targets from anywhere but the top level
+#------------------------------------------------------------------------
+ifneq ($(LEVEL),.)
+
+dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip ::
+ @$(ECHO) ERROR: You must run $@ from $(BUILD_OBJ_ROOT)
+
+else
+
+#------------------------------------------------------------------------
+# Provide the top level targets
+#------------------------------------------------------------------------
+
+dist-gzip: $(DistTarGZip)
+
+$(DistTarGZip) : distdir
+ @$(ECHO) Packing gzipped distribution tar file.
+ $(VERB) cd $(BUILD_OBJ_ROOT) ; $(TAR) chf - "$(DistName)" | gzip -c > "$(DistTarGZip)"
+
+dist-bzip2: $(DistTarBZ2)
+
+$(DistTarBZ2) : distdir
+ @$(ECHO) Packing bzipped distribution tar file.
+ $(VERB) cd $(BUILD_OBJ_ROOT) ; $(TAR) chf - $(DistName) | $(BZIP2) -c >$(DistTarBZ2)
+
+dist-zip: $(DistZip)
+
+$(DistZip) : distdir
+ @$(ECHO) Packing zipped distribution file.
+ $(VERB) rm -f $(DistZip)
+ $(VERB) cd $(BUILD_OBJ_ROOT) ; $(ZIP) -rq $(DistZip) $(DistName)
+
+dist :: $(DistTarGZip) $(DistTarBZ2) $(DistZip)
+ @$(ECHO) ===== DISTRIBUTION PACKAGING SUCESSFUL =====
+
+DistCheckDir := $(LLVM_OBJ_ROOT)/_distcheckdir
+
+dist-check:: $(DistCheckTop) $(DistTarGZip)
+ @$(ECHO) Checking distribution tar file.
+ $(VERB) if test -d $(DistCheckDir) ; then \
+ $(RM) -rf $(DistCheckDir) ; \
+ fi
+ $(VERB) $(MKDIR) $(DistCheckDir)
+ $(VERB) cd $(DistCheckDir) && \
+ $(MKDIR) $(DistCheckDir)/build && \
+ $(MKDIR) $(DistCheckDir)/install && \
+ gunzip -c $(DistTarGZip) | $(TAR) xf - && \
+ cd build && \
+ ../$(DistName)/configure --prefix="$(DistCheckDir)/install" \
+ --srcdir=../$(DistName) --with-llvmgccdir="$(LLVMGCCDIR)" && \
+ $(MAKE) check && \
+ $(MAKE) install && \
+ $(MAKE) uninstall && \
+ $(MAKE) dist && \
+ $(MAKE) clean && \
+ $(MAKE) dist-clean && \
+ $(ECHO) ===== $(DistTarGZip) Ready For Distribution =====
+
+dist-clean::
+ @$(ECHO) Cleaning distribution files
+ $(VERB) $(RM) -rf $(DistTarGZip) $(DistTarBZ2) $(DistZip) $(DistName) $(DistCheckDir)
+
endif
-endif # ifndef DISABLE_AUTO_DEPENDENCIES
+#------------------------------------------------------------------------
+# Provide the recursive distdir target for building the distribution directory
+#------------------------------------------------------------------------
+distdir : $(DistSources)
+ @$(ECHO) Building Distribution Directory $(DistDir)
+ $(VERB) if test "$(DistDir)" = "$(TopDistDir)" ; then \
+ if test -d "$(DistDir)" ; then \
+ find $(DistDir) -type d ! -perm -200 -exec chmod u+w {} ';' || \
+ exit 1 ; \
+ fi ; \
+ $(ECHO) Removing $(DistDir) ; \
+ $(RM) -rf $(DistDir); \
+ fi
+ $(VERB) $(MKDIR) $(DistDir)
+ $(VERB) srcdirstrip=`echo "$(BUILD_SRC_DIR)" | sed 's|.|.|g'`; \
+ srcrootstrip=`echo "$(BUILD_SRC_ROOT)" | sed 's|.|.|g'`; \
+ for file in $(DistFiles) ; do \
+ case "$$file" in \
+ $(BUILD_SRC_DIR)/*) file=`echo "$$file" | sed "s#^$$srcdirstrip/##"`;; \
+ $(BUILD_SRC_ROOT)/*) file=`echo "$$file" | sed "s#^$$srcrootstrip/#$(BUILD_OBJ_ROOT)/#"`;; \
+ esac; \
+ if test -f "$$file" || test -d "$$file" ; then \
+ from_dir=. ; \
+ else \
+ from_dir=$(BUILD_SRC_DIR); \
+ fi; \
+ to_dir=`echo "$$file" | sed -e 's#/[^/]*$$##'`; \
+ if test "$$to_dir" != "$$file" && test "$$to_dir" != "."; then \
+ to_dir="$(DistDir)/$$dir"; \
+ $(MKDIR) "$$to_dir" ; \
+ else \
+ to_dir="$(DistDir)"; \
+ fi; \
+ mid_dir=`echo "$$file" | sed -n -e 's#^\(.*\)/[^/]*$$#\1#p'`; \
+ if test -n "$$mid_dir" ; then \
+ $(MKDIR) "$$to_dir/$$mid_dir" || exit 1; \
+ fi ; \
+ if test -d "$$from_dir/$$file"; then \
+ if test -d "$(BUILD_SRC_DIR)/$$file" && \
+ test "$$from_dir" != "$(BUILD_SRC_DIR)" ; then \
+ cp -pR "$(BUILD_SRC_DIR)/$$file" "$$to_dir" || exit 1; \
+ fi; \
+ cp -pR $$from_dir/$$file $$to_dir || exit 1; \
+ elif test -f "$$from_dir/$$file" ; then \
+ cp -p "$$from_dir/$$file" "$(DistDir)/$$file" || exit 1; \
+ elif test -L "$$from_dir/$$file" ; then \
+ cp -pd "$$from_dir/$$file" $(DistDir)/$$file || exit 1; \
+ elif echo "$(DistAlways)" | grep -v "$$file" >/dev/null ; then \
+ $(ECHO) "===== WARNING: Distribution Source $$from_dir/$$file Not Found!" ; \
+ elif test "$(VERB)" != '@' ; then \
+ $(ECHO) "Skipping non-existent $$from_dir/$$file" ; \
+ fi; \
+ done
+ $(VERB) for subdir in $(DistSubDirs) ; do \
+ if test "$$subdir" \!= "." ; then \
+ new_distdir="$(DistDir)/$$subdir" ; \
+ test -d "$$new_distdir" || $(MKDIR) "$$new_distdir" || exit 1; \
+ ( cd $$subdir && $(MAKE) DistDir="$$new_distdir" distdir ) || exit 1; \
+ fi; \
+ done
+ $(VERB) $(MAKE) DistDir="$(DistDir)" dist-hook || exit 1
+ -$(VERB) find $(DistDir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(SHELL) $(INSTALL_SH) -c -m a+r {} {} \; \
+ || chmod -R a+r $(DistDir)
+
+dist-hook::
+
+
+endif
+
+###############################################################################
+# TOP LEVEL - targets only to apply at the top level directory
+###############################################################################
+
+ifeq ($(LEVEL),.)
+
+#------------------------------------------------------------------------
+# Install support for project's include files:
+#------------------------------------------------------------------------
+install-local::
+ @$(ECHO) Installing include files
+ $(VERB) $(MKDIR) $(includedir)
+ $(VERB) if [ -d "$(BUILD_SRC_ROOT)/include" ] ; then \
+ cd $(BUILD_SRC_ROOT)/include && \
+ find . -path '*/Internal' -prune -o '(' -type f \
+ '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' ')' \
+ -print ')' | grep -v CVS | pax -rwdvpe $(includedir) ; \
+ fi
+
+uninstall-local::
+ @$(ECHO) Uninstalling include files
+ $(VERB) if [ -d "$(BUILD_SRC_ROOT)/include" ] ; then \
+ cd $(BUILD_SRC_ROOT)/include && \
+ $(RM) -f `find . -path '*/Internal' -prune -o '(' -type f \
+ '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' ')' \
+ -print ')' | grep -v CVS | sed 's#^#$(includedir)/#'` ; \
+ fi
+
+#------------------------------------------------------------------------
+# Build tags database for Emacs/Xemacs:
+#------------------------------------------------------------------------
+tags:: TAGS
+
+TAGS:
+ find include lib tools examples -name '*.cpp' -o -name '*.h' | $(ETAGS) $(ETAGSFLAGS) -
+
+endif
+
+###############################################################################
+# MISCELLANEOUS - utility targets
+###############################################################################
+
+#------------------------------------------------------------------------
+# Print out the directories used for building
+printvars::
+ @$(ECHO) "CONFIGURATION : " $(CONFIGURATION)
+ @$(ECHO) "BUILD_SRC_ROOT: " $(BUILD_SRC_ROOT)
+ @$(ECHO) "BUILD_SRC_DIR : " $(BUILD_SRC_DIR)
+ @$(ECHO) "BUILD_OBJ_ROOT: " $(BUILD_OBJ_ROOT)
+ @$(ECHO) "BUILD_OBJ_DIR : " $(BUILD_OBJ_DIR)
+ @$(ECHO) "LLVM_SRC_ROOT : " $(LLVM_SRC_ROOT)
+ @$(ECHO) "LLVM_OBJ_ROOT : " $(LLVM_OBJ_ROOT)
+ @$(ECHO) "libdir : " $(libdir)
+ @$(ECHO) "bindir : " $(bindir)
+ @$(ECHO) "sysconfdir : " $(sysconfdir)
+ @$(ECHO) "bytecode_libdir : " $(bytecode_libdir)
+ @$(ECHO) "USER_TARGETS : " $(USER_TARGETS)
+ @$(ECHO) "OBJMKFILES: $(OBJMKFILES)"
+ @$(ECHO) "SRCMKFILES: $(SRCMKFILES)"
+ @$(ECHO) "OBJDIR: " $(OBJDIR)
+ @$(ECHO) "LIBDIR: " $(LIBDIR)
+ @$(ECHO) "TOOLDIR: " $(TOOLDIR)
+ @$(ECHO) "TDFILES:" '$(TDFILES)'
+ @$(ECHO) "Compile.CXX: " '$(Compile.CXX)'
+ @$(ECHO) "Compile.C: " '$(Compile.C)'
+
projects / oota-llvm.git / blobdiff