#
#===------------------------------------------------------------------------===#
#
-# This file is included by all of the LLVM makefiles. This file defines common
-# rules to do things like compile a .cpp file or generate dependency info.
-# These are platform dependent, so this is the file used to specify these
-# system dependent operations.
-#
-# The following functionality can be set by setting incoming variables.
-# The variable $(LEVEL) *must* be set:
-#
-# 1. LEVEL - The level of the current subdirectory from the top of the
-# MagicStats view. This level should be expressed as a path, for
-# example, ../.. for two levels deep.
-#
-# 2. DIRS - A list of subdirectories to be built. Fake targets are set up
-# so that each of the targets "all", "install", and "clean" each build
-# the subdirectories before the local target. DIRS are guaranteed to be
-# built in order.
-#
-# 3. PARALLEL_DIRS - A list of subdirectories to be built, but that may be
-# built in any order. All DIRS are built in order before PARALLEL_DIRS are
-# built, which are then built in any order.
-#
-# 4. Source - If specified, this sets the source code filenames. If this
-# is not set, it defaults to be all of the .cpp, .c, .y, and .l files
-# in the current directory. Also, if you want to build files in addition
-# to the local files, you can use the BUILT_SOURCES variable
-#
-# 6. LLVM_SRC_ROOT - If specified, points to the top of the LLVM source tree.
-#
-# 8. BUILD_SRC_DIR - The directory which contains the current set of Makefiles
-# and usually the source code too (unless SourceDir is set).
-#
-# 9. BUILD_SRC_ROOT - The root directory of the source code being compiled.
-#
-# 10. BUILD_OBJ_DIR - The directory where object code should be placed.
-#
-# 11. BUILD_OBJ_ROOT - The root directory for where object code should be
-# placed.
-#
-# For building,
-# LLVM, LLVM_SRC_ROOT = BUILD_SRC_ROOT
+# This file is included by all of the LLVM makefiles. For details on how to use
+# it properly, please see the document MakefileGuide.html in the docs directory.
#
#===-----------------------------------------------------------------------====
-#
+################################################################################
+# TARGETS: Define standard targets that can be invoked
+################################################################################
+
+#--------------------------------------------------------------------
+# Define the various target sets
+#--------------------------------------------------------------------
+RecursiveTargets := all clean clean-all install uninstall install-bytecode
+LocalTargets := all-local clean-local clean-all-local check-local \
+ install-local printvars uninstall-local \
+ install-bytecode-local
+TopLevelTargets := check dist dist-check dist-clean tags dist-gzip dist-bzip2 \
+ dist-zip
+UserTargets := $(RecursiveTargets) $(LocalTargets) $(TopLevelTargets)
+InternalTargets := preconditions distdir dist-hook
+
+################################################################################
+# INITIALIZATION: Basic things the makefile needs
+################################################################################
+
+#--------------------------------------------------------------------
# Set the VPATH so that we can find source files.
-#
+#--------------------------------------------------------------------
VPATH=$(BUILD_SRC_DIR)
-###########################################################################
-# Default Targets:
-# The following targets are the standard top level targets for
-# building.
-###########################################################################
-
-
-# Ensure all preconditions are met
-all:: preconditions
-
-# Make sure all the user-target rules are double colon rules
-all :: preconditions
-clean:: preconditions
-install :: preconditions
-uninstall :: preconditions
-check:: preconditions
-dist:: preconditions
-distcheck:: preconditions
-distclean:: preconditions
-
-
-###########################################################################
-# Suffixes and implicit rules:
-# Empty out the list of suffixes, generate a list that is only
-# used by this Makefile, and cancel useless implicit rules. This
-# will hopefully speed up compilation a little bit.
-###########################################################################
+#--------------------------------------------------------------------
+# Reset the list of suffixes we know how to build
+#--------------------------------------------------------------------
.SUFFIXES:
-.SUFFIXES: .c .cpp .h .hpp .y .l
-.SUFFIXES: .lo .o .a $(SHLIBEXT) .bc .td
-.SUFFIXES: .ps .dot .d
+.SUFFIXES: .c .cpp .h .hpp .y .l .lo .o .a .bc .td .ps .dot
+.SUFFIXES: $(SHLIBEXT) $(SUFFIXES)
-#
-# Mark all of these targets as phony. This will hopefully speed up builds
-# slightly since GNU Make will not try to find implicit rules for targets
-# which are marked as Phony.
-#
-ALL_TARGETS= all dynamic bytecodelib install-bytecode-library clean distclean install test bytecode prdirs
-.PHONY: $(ALL_TARGETS) preconditions
+#--------------------------------------------------------------------
+# Mark all of these targets as phony to avoid implicit rule search
+#--------------------------------------------------------------------
+.PHONY: $(UserTargets) $(InternalTargets)
+
+#--------------------------------------------------------------------
+# Make sure all the user-target rules are double colon rules and
+# they are defined first.
+#--------------------------------------------------------------------
+
+$(UserTargets)::
+
+################################################################################
+# PRECONDITIONS: that which must be built/checked first
+################################################################################
+
+SrcMakefiles := $(filter %Makefile %Makefile.tests,\
+ $(wildcard $(BUILD_SRC_DIR)/Makefile*))
+ObjMakefiles := $(subst $(BUILD_SRC_DIR),$(BUILD_OBJ_DIR),$(SrcMakefiles))
+ConfigureScript := $(BUILD_SRC_ROOT)/configure
+ConfigStatusScript := $(BUILD_OBJ_ROOT)/config.status
+LConfigStatusScript:= $(LLVM_OBJ_ROOT)/config.status
+MakefileConfigIn := $(LLVM_SRC_ROOT)/Makefile.config.in
+MakefileConfig := $(LLVM_OBJ_ROOT)/Makefile.config
+PreConditions := $(ConfigStatusScript) $(MakefileConfig) $(ObjMakefiles)
-###########################################################################
-# Miscellaneous paths and commands:
-# This section defines various configuration macros, such as where
-# to find burg, tblgen, and libtool.
-###########################################################################
+preconditions : $(PreConditions)
+
+#------------------------------------------------------------------------
+# Make sure the BUILT_SOURCES are built first
+#------------------------------------------------------------------------
+$(filter-out clean clean-local,$(UserTargets)):: $(BUILT_SOURCES)
+
+clean-local::
+ifneq ($(strip $(BUILT_SOURCES)),)
+ -$(Verb) $(RM) -f $(BUILT_SOURCES)
+endif
+
+ifneq ($(BUILD_OBJ_ROOT),$(BUILD_SRC_ROOT))
+spotless:
+ $(Verb) if test -x config.status ; then \
+ $(EchoCmd) Wiping out $(BUILD_OBJ_ROOT) ; \
+ $(MKDIR) .spotless.save ; \
+ $(MV) config.status .spotless.save ; \
+ $(MV) mklib .spotless.save ; \
+ $(MV) projects .spotless.save ; \
+ $(RM) -rf * ; \
+ $(MV) .spotless.save/config.status . ; \
+ $(MV) .spotless.save/mklib . ; \
+ $(MV) .spotless.save/projects . ; \
+ $(RM) -rf .spotless.save ; \
+ $(EchoCmd) Rebuilding configuration of $(BUILD_OBJ_ROOT) ; \
+ $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
+ $(ConfigStatusScript) ; \
+ else \
+ $(EchoCmd) "make spotless" can only be run from $(BUILD_OBJ_ROOT); \
+ fi
+endif
+
+$(BUILT_SOURCES) : $(ObjMakefiles)
+
+#------------------------------------------------------------------------
+# Make sure we're not using a stale configuration
+#------------------------------------------------------------------------
+reconfigure:
+ $(Echo) Reconfiguring $(BUILD_OBJ_ROOT)
+ $(Verb) cd $(BUILD_OBJ_ROOT) && \
+ if test -w $(BUILD_OBJ_ROOT)/config.cache ; then \
+ $(RM) $(BUILD_OBJ_ROOT)/config.cache ; \
+ fi ; \
+ $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
+ $(ConfigStatusScript)
+
+.PRECIOUS: $(ConfigStatusScript)
+$(ConfigStatusScript): $(ConfigureScript)
+ $(Echo) Reconfiguring with $<
+ $(Verb) cd $(BUILD_OBJ_ROOT) && \
+ if test -w $(BUILD_OBJ_ROOT)/config.cache ; then \
+ $(RM) $(BUILD_OBJ_ROOT)/config.cache ; \
+ fi ; \
+ $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
+ $(ConfigStatusScript)
+
+#------------------------------------------------------------------------
+# Make sure the configuration makefile is up to date
+#------------------------------------------------------------------------
+$(MakefileConfig): $(MakefileConfigIn) $(LConfigStatusScript)
+ $(Echo) Regenerating $@
+ $(Verb) cd $(LLVM_OBJ_ROOT) ; $(LConfigStatusScript) Makefile.config
+
+#------------------------------------------------------------------------
+# If the Makefile in the source tree has been updated, copy it over into the
+# build tree. But, only do this if the source and object makefiles differ
+#------------------------------------------------------------------------
+ifneq ($(BUILD_OBJ_DIR),$(BUILD_SRC_DIR))
+
+Makefile: $(BUILD_SRC_DIR)/Makefile
+ $(Echo) "Updating Makefile"
+ $(Verb) $(MKDIR) $(@D)
+ $(Verb) $(CP) -f $< $@
+
+# Copy the Makefile.* files unless we're in the root directory which avoids
+# the copying of Makefile.config.in or other things that should be explicitly
+# taken care of.
+$(BUILD_OBJ_DIR)/Makefile% : $(BUILD_SRC_DIR)/Makefile%
+ @case '$?' in \
+ *Makefile.rules) ;; \
+ *.in) ;; \
+ *) $(Echo) "Updating $(@F)" ; \
+ $(MKDIR) $(@D) ; \
+ $(CP) -f $< $@ ;; \
+ esac
+
+endif
+
+#------------------------------------------------------------------------
+# Set up the basic dependencies
+#------------------------------------------------------------------------
+$(UserTargets):: $(PreConditions)
+
+all:: all-local
+clean:: clean-local
+clean-all:: clean-local clean-all-local
+install:: install-local
+uninstall:: uninstall-local
+install-local:: all-local
+install-bytecode:: install-bytecode-local
+
+###############################################################################
+# VARIABLES: Set up various variables based on configuration data
+###############################################################################
#--------------------------------------------------------------------
-# Variables derived from configuration options...
+# Variables derived from configuration we are building
#--------------------------------------------------------------------
ifdef ENABLE_PROFILING
- CONFIGURATION := Profile
- CXXFLAGS += -O3 -DNDEBUG -felide-constructors -finline-functions -pg
- CFLAGS += -O3 -DNDEBUG -pg
- LDFLAGS += -O3 -DNDEBUG -pg
+ BuildMode := Profile
+ CXX.Flags := -O3 -DNDEBUG -felide-constructors -finline-functions -pg
+ C.Flags := -O3 -DNDEBUG -pg
+ LD.Flags := -O3 -DNDEBUG -pg
else
ifdef ENABLE_OPTIMIZED
- CONFIGURATION := Release
- CXXFLAGS += -O3 -DNDEBUG -finline-functions -felide-constructors -fomit-frame-pointer
- CFLAGS += -O3 -DNDEBUG -fomit-frame-pointer
- LDFLAGS += -O3 -DNDEBUG
+ BuildMode := Release
+ CXX.Flags := -O3 -DNDEBUG -finline-functions \
+ -felide-constructors -fomit-frame-pointer
+ C.Flags := -O3 -DNDEBUG -fomit-frame-pointer
+ LD.Flags := -O3 -DNDEBUG
else
- CONFIGURATION := Debug
- CXXFLAGS += -g -D_DEBUG
- CFLAGS += -g -D_DEBUG
- LDFLAGS += -g -D_DEBUG
+ BuildMode := Debug
+ CXX.Flags := -g -D_DEBUG
+ C.Flags := -g -D_DEBUG
+ LD.Flags := -g -D_DEBUG
KEEP_SYMBOLS := 1
endif
endif
-ARFLAGS := cru
-#------------------------------------------------------------------------------
+CXX.Flags += $(CXXFLAGS)
+C.Flags += $(CFLAGS)
+CPP.Flags += $(CPPFLAGS)
+LD.Flags += $(LDFLAGS)
+AR.Flags := cru
+LibTool.Flags := --tag=CXX
+
+#--------------------------------------------------------------------
# Directory locations
-OBJDIR := $(BUILD_OBJ_DIR)/$(CONFIGURATION)
-LIBDIR := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION)
-TOOLDIR := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION)
-LLVMLIBDIR := $(LLVM_OBJ_ROOT)/lib/$(CONFIGURATION)
-LLVMTOOLDIR := $(LLVM_OBJ_ROOT)/tools/$(CONFIGURATION)
+#--------------------------------------------------------------------
+ObjDir := $(BUILD_OBJ_DIR)/$(BuildMode)
+LibDir := $(BUILD_OBJ_ROOT)/$(BuildMode)/lib
+ToolDir := $(BUILD_OBJ_ROOT)/$(BuildMode)/bin
+ExmplDir := $(BUILD_OBJ_ROOT)/$(BuildMode)/examples
+LLVMLibDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/lib
+LLVMToolDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/bin
+LExmplDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/examples
+CFERuntimeLibDir := $(LLVMGCCDIR)/lib
-#------------------------------------------------------------------------------
+#--------------------------------------------------------------------
# Full Paths To Compiled Tools and Utilities
+#--------------------------------------------------------------------
+EchoCmd := $(ECHO) llvm[$(MAKELEVEL)]:
+Echo := @$(EchoCmd)
+ifndef LIBTOOL
LIBTOOL := $(LLVM_OBJ_ROOT)/mklib
-LLVMAS := $(LLVMTOOLDIR)/llvm-as$(EXEEXT)
-BURG := $(LLVMTOOLDIR)/burg$(EXEEXT)
-TBLGEN := $(LLVMTOOLDIR)/tblgen$(EXEEXT)
-GCCLD := $(LLVMTOOLDIR)/gccld$(EXEEXT)
-LLVMGCC := PATH=$(LLVMTOOLDIR):$(PATH) $(LLVMGCCDIR)/bin/gcc
-LLVMGXX := PATH=$(LLVMTOOLDIR):$(PATH) $(LLVMGCCDIR)/bin/g++
-
-# Need a better way to compute this.
-LLVMGCCLIBDIR := $(dir $(shell $(LLVMGCC) -print-file-name=libgcc.a))/
+endif
+ifndef LLVMAS
+LLVMAS := $(LLVMToolDir)/llvm-as$(EXEEXT)
+endif
+ifndef BURG
+BURG := $(LLVMToolDir)/burg$(EXEEXT)
+endif
+ifndef TBLGEN
+TBLGEN := $(LLVMToolDir)/tblgen$(EXEEXT)
+endif
+ifndef GCCAS
+GCCAS := $(LLVMToolDir)/gccas$(EXEEXT)
+endif
+ifndef GCCLD
+GCCLD := $(LLVMToolDir)/gccld$(EXEEXT)
+endif
+ifndef LDIS
+LLVMDIS := $(LLVMToolDir)/llvm-dis$(EXEEXT)
+endif
+ifndef LLI
+LLI := $(LLVMToolDir)/lli$(EXEEXT)
+endif
+ifndef LOPT
+LOPT := $(LLVMToolDir)/opt$(EXEEXT)
+endif
+LLVMGCCWITHPATH := PATH=$(LLVMToolDir):$(PATH) $(LLVMGCC)
+LLVMGXXWITHPATH := PATH=$(LLVMToolDir):$(PATH) $(LLVMGXX)
-#------------------------------------------------------------------------------
+#--------------------------------------------------------------------
# Adjust to user's request
+#--------------------------------------------------------------------
+# Adjust LIBTOOL flags for shared libraries, or not.
ifndef SHARED_LIBRARY
- LIBTOOL += --tag=disable-shared
+ LibTool.Flags += --tag=disable-shared
else
- LDFLAGS += -rpath $(LIBDIR)
+ LD.Flags += -rpath $(LibDir)
endif
-#
-# Verbosity levels
-#
+ifdef TOOL_VERBOSE
+ C.Flags += -v
+ CXX.Flags += -v
+ LD.Flags += -v
+ VERBOSE := 1
+endif
+
+# Adjust settings for verbose mode
ifndef VERBOSE
- VERB := @
- LIBTOOL += --silent
- AR += >/dev/null 2>/dev/null
+ Verb := @
+ LibTool.Flags += --silent
+ AR.Flags += >/dev/null 2>/dev/null
+ ConfigureScriptFLAGS += >$(BUILD_OBJ_DIR)/configure.out 2>&1
+else
+ ConfigureScriptFLAGS :=
endif
# By default, strip symbol information from executable
ifndef KEEP_SYMBOLS
- STRIP = $(PLATFORMSTRIPOPTS)
- STRIP_WARN_MSG = "(without symbols)"
+ Strip := $(PLATFORMSTRIPOPTS)
+ StripWarnMsg := "(without symbols)"
endif
+# Adjust linker flags for building an executable
ifdef TOOLNAME
- LDFLAGS += -rpath $(TOOLDIR) -export-dynamic $(TOOLLINKOPTS)
+ifdef EXAMPLE_TOOL
+ LD.Flags += -rpath $(ExmplDir) -export-dynamic
+else
+ LD.Flags += -rpath $(ToolDir) -export-dynamic
endif
-
-# TOOLLINKOPTSB to pass options to the linker like library search path etc
-# Note that this is different from TOOLLINKOPTS, these options
-# are passed to the linker *before* the USEDLIBS options are passed.
-# e.g. usage TOOLLINKOPTSB = -L/home/xxx/lib
-ifdef TOOLLINKOPTSB
-LDFLAGS += $(TOOLLINKOPTSB)
endif
-LDFLAGS += -L$(LIBDIR) -L$(LLVMLIBDIR)
-
-#------------------------------------------------------------------------------
+#----------------------------------------------------------
# Options To Invoke Tools
+#----------------------------------------------------------
CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused
-CPPFLAGS += -I$(BUILD_OBJ_DIR) \
- -I$(BUILD_SRC_DIR) \
- -I$(BUILD_SRC_ROOT)/include \
- -I$(BUILD_OBJ_ROOT)/include \
- -I$(LLVM_OBJ_ROOT)/include \
- -I$(LLVM_SRC_ROOT)/include \
- -D_GNU_SOURCE -D__STDC_LIMIT_MACROS
-
-CXXCompile := $(CXX) $(CPPFLAGS) $(CompileCommonOpts) $(CXXFLAGS) -c
-LTCXXCompile := $(LIBTOOL) --tag=CXX --mode=compile $(CXXCompile)
-CCompile := $(CC) $(CPPFLAGS) $(CompileCommonOpts) -c $(CFLAGS)
-LTCCompile := $(LIBTOOL) --mode=compile $(CCompile)
-BCCXXCompile := $(LLVMGXX) $(CPPFLAGS) $(CompileCommonOpts) $(CXXFLAGS) -c
-BCCCompile := $(LLVMGCC) $(CPPFLAGS) $(CompileCommonOpts) $(CFLAGS) -c
-Link := $(LIBTOOL) --tag=CXX --mode=link $(CXX) $(CPPFLAGS) $(CompileCommonOpts) $(LDFLAGS) $(STRIP)
-Relink := $(LIBTOOL) --tag=CXX --mode=link $(CXX)
-BCLinkLib := $(LLVMGCC) -shared -nostdlib
-Burg := $(BURG) -I $(BUILD_SRC_DIR)
-TableGen := $(TBLGEN) -I $(BUILD_SRC_DIR)
-Archive := $(AR) $(ARFLAGS)
+LD.Flags += -L$(LibDir) -L$(LLVMLibDir)
+CPP.Flags += -I$(BUILD_OBJ_DIR) \
+ -I$(BUILD_SRC_DIR) \
+ -I$(BUILD_SRC_ROOT)/include \
+ -I$(BUILD_OBJ_ROOT)/include \
+ -I$(LLVM_OBJ_ROOT)/include \
+ -I$(LLVM_SRC_ROOT)/include \
+ -D_GNU_SOURCE -D__STDC_LIMIT_MACROS
+
+Compile.C = $(CC) $(CPP.Flags) $(CompileCommonOpts) -c $(C.Flags)
+LTCompile.C = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.C)
+BCCompile.C = $(LLVMGCCWITHPATH) $(CPP.Flags) $(CompileCommonOpts) \
+ $(C.Flags) -c
+Compile.CXX = $(CXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -c
+LTCompile.CXX = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.CXX)
+BCCompile.CXX = $(LLVMGXXWITHPATH) $(CPP.Flags) $(CompileCommonOpts) \
+ $(CXX.Flags) -c
+Link = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
+ $(CompileCommonOpts) $(LD.Flags) $(Strip)
+Relink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
+ $(CompileCommonOpts)
+LTInstall = $(LIBTOOL) $(LibTool.Flags) --mode=install $(INSTALL)
+Burg = $(BURG) -I $(BUILD_SRC_DIR)
+TableGen = $(TBLGEN) -I $(BUILD_SRC_DIR)
+Archive = $(AR) $(AR.Flags)
+LArchive = $(LLVMToolDir)/llvm-ar rcsf
ifdef RANLIB
-Ranlib := $(RANLIB)
+Ranlib = $(RANLIB)
else
-Ranlib := ranlib
+Ranlib = ranlib
endif
#----------------------------------------------------------
-# Source includes all of the cpp files, and objects are derived from the
-# source files...
-# The local Makefile can list other Source files via BUILT_SOURCES = ...
-#
-ifndef Source
+# Get the list of source files and compute object file
+# names from them.
+#----------------------------------------------------------
+ifdef FAKE_SOURCES
+ Sources :=
+ FakeSources := $(FAKE_SOURCES)
+ ifdef BUILT_SOURCES
+ FakeSources += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES))
+ endif
+ BaseNameSources := $(sort $(basename $(FakeSources)))
+ ObjectsO := $(BaseNameSources:%=$(ObjDir)/%.o)
+ ObjectsLO := $(BaseNameSources:%=$(ObjDir)/%.lo)
+ ObjectsBC := $(BaseNameSources:%=$(ObjDir)/%.bc)
+else
+ ifndef SOURCES
+ Sources := $(notdir $(wildcard $(BUILD_SRC_DIR)/*.cpp \
+ $(BUILD_SRC_DIR)/*.cc $(BUILD_SRC_DIR)/*.c $(BUILD_SRC_DIR)/*.y \
+ $(BUILD_SRC_DIR)/*.l))
+ else
+ Sources := $(SOURCES)
+ endif
-Source := $(notdir $(wildcard $(BUILD_SRC_DIR)/*.cpp \
- $(BUILD_SRC_DIR)/*.cc $(BUILD_SRC_DIR)/*.c $(BUILD_SRC_DIR)/*.y \
- $(BUILD_SRC_DIR)/*.l))
-endif
+ ifdef BUILT_SOURCES
+ Sources += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES))
+ endif
-ifdef BUILT_SOURCES
-Source += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES))
+ BaseNameSources := $(sort $(basename $(Sources)))
+ ObjectsO := $(BaseNameSources:%=$(ObjDir)/%.o)
+ ObjectsLO := $(BaseNameSources:%=$(ObjDir)/%.lo)
+ ObjectsBC := $(BaseNameSources:%=$(ObjDir)/%.bc)
endif
-#
-# Libtool Objects
-#
-Srcs := $(sort $(basename $(Source)))
-ObjectsO := $(Srcs:%=$(OBJDIR)/%.o)
-ObjectsLO := $(Srcs:%=$(OBJDIR)/%.lo)
-ObjectsBC := $(Srcs:%=$(OBJDIR)/%.bc)
+###############################################################################
+# DIRECTORIES: Handle recursive descent of directory structure
+###############################################################################
+
+#---------------------------------------------------------
+# Provide rules to make install dirs. This must be early
+# in the file so they get built before dependencies
+#---------------------------------------------------------
+
+$(bindir):
+ $(Verb) $(MKDIR) $(bindir)
+
+$(libdir):
+ $(Verb) $(MKDIR) $(libdir)
+
+$(includedir):
+ $(Verb) $(MKDIR) $(includedir)
+
+$(sysconfdir):
+ $(Verb) $(MKDIR) $(sysconfdir)
+
+# To create other directories, as needed, and timestamp their creation
+%/.dir:
+ $(Verb) $(MKDIR) $* > /dev/null
+ $(Verb) $(DATE) > $@
+
+.PRECIOUS: $(ObjDir)/.dir $(LibDir)/.dir $(ToolDir)/.dir $(ExmplDir)/.dir
+.PRECIOUS: $(LLVMLibDir)/.dir $(LLVMToolDir)/.dir $(LLVMExmplDir)/.dir
#---------------------------------------------------------
-# Handle the DIRS and PARALLEL_DIRS options
+# Handle the DIRS options for sequential construction
#---------------------------------------------------------
+SubDirs :=
ifdef DIRS
-$(ALL_TARGETS)::
- $(VERB) for dir in $(DIRS); do \
+SubDirs += $(DIRS)
+$(RecursiveTargets)::
+ $(Verb) for dir in $(DIRS); do \
+ if [ ! -f $$dir/Makefile ]; then \
+ $(MKDIR) $$dir; \
+ $(CP) $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ fi; \
+ if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
+ ($(MAKE) -C $$dir $@ ) || exit 1; \
+ fi ; \
+ done
+endif
+
+#---------------------------------------------------------
+# Handle the EXPERIMENTAL_DIRS options ensuring success
+# after each directory is built.
+#---------------------------------------------------------
+ifdef EXPERIMENTAL_DIRS
+$(RecursiveTargets)::
+ $(Verb) for dir in $(EXPERIMENTAL_DIRS); do \
if [ ! -f $$dir/Makefile ]; then \
$(MKDIR) $$dir; \
- cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ $(CP) $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
- ($(MAKE) -C $$dir $@ $(MFLAGS)) || exit 1; \
+ if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
+ ($(MAKE) -C $$dir $@ ) || exit 0; \
+ fi ; \
done
endif
-# Handle PARALLEL_DIRS
+#---------------------------------------------------------
+# Handle the PARALLEL_DIRS options for parallel construction
+#---------------------------------------------------------
ifdef PARALLEL_DIRS
-all :: $(addsuffix /.makeall , $(PARALLEL_DIRS))
-install :: $(addsuffix /.makeinstall , $(PARALLEL_DIRS))
-clean :: $(addsuffix /.makeclean , $(PARALLEL_DIRS))
-test :: $(addsuffix /.maketest , $(PARALLEL_DIRS))
-bytecode :: $(addsuffix /.makebytecode, $(PARALLEL_DIRS))
-stripped-bytecode :: $(addsuffix /.makestripped-bytecode, $(PARALLEL_DIRS))
-install-bytecode :: $(addsuffix /.makeinstall-bytecode, $(PARALLEL_DIRS))
-
-%/.makeall %/.makeinstall %/.makeclean %/.maketest %/.makebytecode %/.makestripped-bytecode %/.makeinstall-bytecode:
- $(VERB) if [ ! -f $(@D)/Makefile ]; then \
+
+SubDirs += $(PARALLEL_DIRS)
+
+# Unfortunately, this list must be maintained if new recursive targets are added
+all :: $(addsuffix /.makeall ,$(PARALLEL_DIRS))
+clean :: $(addsuffix /.makeclean ,$(PARALLEL_DIRS))
+clean-all:: $(addsuffix /.makeclean-all,$(PARALLEL_DIRS))
+install :: $(addsuffix /.makeinstall ,$(PARALLEL_DIRS))
+uninstall:: $(addsuffix /.makeuninstall,$(PARALLEL_DIRS))
+install-bytecode :: $(addsuffix /.makeinstall-bytecode,$(PARALLEL_DIRS))
+
+ParallelTargets := $(foreach T,$(RecursiveTargets),%/.make$(T))
+
+$(ParallelTargets) :
+ $(Verb) if [ ! -f $(@D)/Makefile ]; then \
$(MKDIR) $(@D); \
- cp $(BUILD_SRC_DIR)/$(@D)/Makefile $(@D)/Makefile; \
+ $(CP) $(BUILD_SRC_DIR)/$(@D)/Makefile $(@D)/Makefile; \
fi; \
- $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@) $(MFLAGS)
+ if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
+ $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@) ; \
+ fi
endif
-# Handle directories that may or may not exist
+#---------------------------------------------------------
+# Handle the OPTIONAL_DIRS options for directores that may
+# or may not exist.
+#---------------------------------------------------------
ifdef OPTIONAL_DIRS
-$(ALL_TARGETS)::
- $(VERB) for dir in $(OPTIONAL_DIRS); do \
+
+SubDirs += $(OPTIONAL_DIRS)
+
+$(RecursiveTargets)::
+ $(Verb) for dir in $(OPTIONAL_DIRS); do \
if [ -d $(BUILD_SRC_DIR)/$$dir ]; then\
if [ ! -f $$dir/Makefile ]; then \
$(MKDIR) $$dir; \
- cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ $(CP) $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
- ($(MAKE) -C$$dir $@ $(MFLAGS)) || exit 1; \
+ if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
+ ($(MAKE) -C$$dir $@ ) || exit 1; \
+ fi ; \
fi \
done
endif
# Handle the CONFIG_FILES options
#---------------------------------------------------------
ifdef CONFIG_FILES
-install:: install-config-files
-$(sysconfdir):
- $(MKDIR) $(sysconfdir)
+install-local:: $(sysconfdir) $(CONFIG_FILES)
+ $(Echo) Installing Configuration Files To $(sysconfdir)
+ $(Verb)for file in $(CONFIG_FILES); do \
+ if test -f $(BUILD_OBJ_DIR)/$${file} ; then \
+ $(INSTALL) $(BUILD_OBJ_DIR)/$${file} $(sysconfdir) ; \
+ elif test -f $(BUILD_SRC_DIR)/$${file} ; then \
+ $(INSTALL) $(BUILD_SRC_DIR)/$${file} $(sysconfdir) ; \
+ else \
+ $(ECHO) Error: cannot find config file $${file}. ; \
+ fi \
+ done
-install-config-files: $(sysconfdir) $(CONFIG_FILES)
- $(VERB)$(ECHO) Installing Configuration Files To $(sysconfdir)
- $(VERB)for file in $(CONFIG_FILES); do \
- $(INSTALL) $(BUILD_SRC_DIR)/$${file} $(sysconfdir) ; \
+uninstall-local::
+ $(Echo) Uninstalling Configuration Files From $(sysconfdir)
+ $(Verb)for file in $(CONFIG_FILES); do \
+ $(RM) -f $(sysconfdir)/$${file} ; \
done
+
endif
-###########################################################################
-# Library Build Rules:
-#
+###############################################################################
+# Library Build Rules: Four ways to build a library
+###############################################################################
+
#---------------------------------------------------------
-# Handle the LIBRARYNAME option - used when building libs...
+# Bytecode Module Targets:
+# If the user set MODULE_NAME then they want to build a
+# bytecode module from the sources. We compile all the
+# sources and link it together into a single bytecode
+# module.
#---------------------------------------------------------
-#
-# When libraries are built, they are allowed to optionally define the
-# DONT_BUILD_RELINKED make variable, which, when defined, prevents a .o file
-# from being built for the library. This .o files may then be linked to by a
-# tool if the tool does not need (or want) the semantics a .a file provides
-# (linking in only object files that are "needed"). If a library is never to
-# be used in this way, it is better to define DONT_BUILD_RELINKED, and define
-# BUILD_ARCHIVE instead.
-#
-# Some libraries must be built as .a files (libscalar for example) because if
-# it's built as a .o file, then all of the constituent .o files in it will be
-# linked into tools (for example gccas) even if they only use one of the parts
-# of it. For this reason, sometimes it's useful to use libraries as .a files.
-###########################################################################
-# Install rule for making bytecode library directory if it does not exist.
-# Trigger this by making libraries that need to be installed here depend on it.
-$(DESTDIR)$(bytecode_libdir):
- $(MKDIR) $@
+ifdef MODULE_NAME
+
+Module := $(LibDir)/$(MODULE_NAME).bc
+LinkModule := $(LLVMGCCWITHPATH) -shared -nostdlib
+
+ifdef EXPORTED_SYMBOL_FILE
+LinkMOdule += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
+endif
+
+$(Module): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir $(GCCLD)
+ $(Echo) Building $(BuildMOde) Bytecode Module $(notdir $@)
+ $(Verb) $(LinkModule) -o $@ $(ObjectsBC)
+
+all-local:: $(Module)
+
+clean-local::
+ifneq ($(strip $(Module)),)
+ -$(Verb) $(RM) -f $(Module)
+endif
+
+ifdef BYTECODE_DESTINATION
+ModuleDestDir := $(BYTECODE_DESTINATION)
+else
+ModuleDestDir := $(libdir)
+endif
+
+DestModule := $(ModuleDestDir)/$(MODULE_NAME).bc
+
+install-module:: $(DestModule)
+install-local:: $(DestModule)
+
+$(DestModule): $(ModuleDestDir) $(Module)
+ $(Echo) Installing $(BuildMode) Bytecode Module $(DestModule)
+ $(Verb) $(INSTALL) $(Module) $@
+
+uninstall-local::
+ $(Echo) Uninstalling $(BuildMode) Bytecode Module $(DestModule)
+ -$(Verb) $(RM) -f $(DestModule)
+
+endif
+# if we're building a library ...
ifdef LIBRARYNAME
# Make sure there isn't any extranous whitespace on the LIBRARYNAME option
LIBRARYNAME := $(strip $(LIBRARYNAME))
-LIBNAME_LA := $(LIBDIR)/lib$(LIBRARYNAME).la
-LIBNAME_A := $(LIBDIR)/lib$(LIBRARYNAME).a
-LIBNAME_O := $(LIBDIR)/$(LIBRARYNAME).o
-LIBNAME_BC := $(LIBDIR)/lib$(LIBRARYNAME).bc
+LibName.LA := $(LibDir)/lib$(LIBRARYNAME).la
+LibName.A := $(LibDir)/lib$(LIBRARYNAME).a
+LibName.O := $(LibDir)/$(LIBRARYNAME).o
+LibName.BCA:= $(LibDir)/lib$(LIBRARYNAME).bca
-#-------------------------------------------------------------------------------
-# Shared Library Targets
-# Modify the top level targets to build the desired libraries.
-#-------------------------------------------------------------------------------
-
-# Does the library want a shared library version built?
+#---------------------------------------------------------
+# Shared Library Targets:
+# If the user asked for a shared library to be built
+# with the SHARED_LIBRARY variable, then we provide
+# targets for building them.
+#---------------------------------------------------------
ifdef SHARED_LIBRARY
-all:: $(LIBNAME_LA)
+all-local:: $(LibName.LA)
+
+$(LibName.LA): $(ObjectsLO) $(LibDir)/.dir
+ $(Echo) Linking $(BuildMode) Shared Library $(LIBRARYNAME)$(SHLIBEXT)
+ $(Verb) $(Link) -o $@ $(ObjectsLO)
+ $(Verb) $(LTInstall) $@ $(LibDir)
+
+clean-local::
+ifneq ($(strip $(LibName.LA)),)
+ -$(Verb) $(RM) -f $(LibName.LA)
+endif
+
+DestSharedLib = $(libdir)/lib$(LIBRARYNAME)$(SHLIBEXT)
+
+install-local:: $(DestSharedLib)
-$(LIBNAME_LA): $(BUILT_SOURCES) $(ObjectsLO) $(LIBDIR)/.dir
- @$(ECHO) Linking shared library $(notdir $@)
- $(VERB) $(Link) -o $@ $(ObjectsLO)
- $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $@ $(LIBDIR)
- @$(ECHO) Finished linking shared library $(LIBRARYNAME).la
-clean::
- $(VERB) $(RM) -f $(LIBNAME_LA)
+$(DestSharedLib): $(libdir) $(LibName.LA)
+ $(Echo) Installing $(BuildMode) Shared Library $(DestSharedLib)
+ $(Verb) $(LTInstall) $(LibName.LA) $(DestSharedLib)
+ $(Verb) $(LIBTOOL) --finish $(libdir)
-install:: $(DESTDIR)$(libdir)/lib$(LIBRARYNAME)$(SHLIBEXT)
+uninstall-local::
+ $(Echo) Uninstalling $(BuildMode) Shared Library $(DestSharedLib)
+ -$(Verb) $(RM) -f $(libdir)/lib$(LIBRARYNAME).*
-$(DESTDIR)/lib/lib$(LIBRARYNAME)$(SHLIBEXT): $(LIBNAME_LA)
- @$(ECHO) Installing shared library $(notdir $@)
- $(VERB) $(MKDIR) $(DESTDIR)
- $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_LA) $(DESTDIR)$(libdir)/lib$(LIBRARYNAME)$(SHLIBEXT)
- $(VERB) $(LIBTOOL) --finish $(DESTDIR)$(libdir)
endif
-# Does the library want a bytecode version built?
+#---------------------------------------------------------
+# Bytecode Library Targets:
+# If the user asked for a bytecode library to be built
+# with the BYTECODE_LIBRARY variable, then we provide
+# targets for building them.
+#---------------------------------------------------------
ifdef BYTECODE_LIBRARY
-ifdef EXPORTED_SYMBOL_LIST
- BCLinkLib += -Xlinker -internalize-public-api-list=$(EXPORTED_SYMBOL_LIST)
+# make the C and C++ compilers strip debug info out of bytecode libraries.
+BCCompile.C += -Wa,-strip-debug
+BCCompile.CXX += -Wa,-strip-debug
+
+all-local:: $(LibName.BCA)
+
+ifdef EXPORTED_SYMBOL_FILE
+BCLinkLib = $(LLVMGCCWITHPATH) -shared -nostdlib -Xlinker \
+ -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
+
+$(LibName.BCA): $(ObjectsBC) $(LibDir)/.dir $(GCCLD) \
+ $(LLVMToolDir)/llvm-ar
+ $(Echo) Building $(BuildMode) Bytecode Archive $(notdir $@) \
+ "(internalize)"
+ $(Verb) $(BCLinkLib) -o $(ObjDir)/$(LIBRARYNAME).o $(ObjectsBC)
+ $(Verb) $(RM) -f $@
+ $(Verb) $(LArchive) $@ $(ObjDir)/$(LIBRARYNAME).o
else
- ifdef EXPORTED_SYMBOL_FILE
- BCLinkLib += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
- else
- BCLinkLib += -Xlinker -disable-internalize
- endif
+$(LibName.BCA): $(ObjectsBC) $(LibDir)/.dir \
+ $(LLVMToolDir)/llvm-ar
+ $(Echo) Building $(BuildMode) Bytecode Archive $(notdir $@)
+ $(Verb) $(RM) -f $@
+ $(Verb) $(LArchive) $@ $(ObjectsBC)
+
+endif
+
+clean-local::
+ifneq ($(strip $(LibName.BCA)),)
+ -$(Verb) $(RM) -f $(LibName.BCA)
+endif
+
+ifdef BYTECODE_DESTINATION
+BytecodeDestDir := $(BYTECODE_DESTINATION)
+else
+BytecodeDestDir := $(libdir)
endif
-all:: $(LIBNAME_BC)
+DestBytecodeLib = $(BytecodeDestDir)/lib$(LIBRARYNAME).a
-$(LIBNAME_BC): $(BUILT_SOURCES) $(ObjectsBC) $(LIBDIR)/.dir
- @$(ECHO) Linking bytecode library $(notdir $@)
- $(VERB) $(BCLinkLib) -o $@ $(ObjectsBC)
+install-bytecode-local:: $(DestBytecodeLib)
-clean::
- $(VERB) $(RM) -f $(LIBNAME_BC)
+install-local:: $(DestBytecodeLib)
-install:: $(DESTDIR)$(bytecode_libdir)/lib$(LIBRARYNAME).bc
+$(DestBytecodeLib): $(BytecodeDestDir) $(LibName.BCA)
+ $(Echo) Installing $(BuildMode) Bytecode Archive $(DestBytecodeLib)
+ $(Verb) $(INSTALL) $(LibName.BCA) $@
-$(DESTDIR)$(bytecode_libdir)/lib$(LIBRARYNAME).bc: $(LIBNAME_BC) $(DESTDIR)$(bytecode_libdir)
- @$(ECHO) Installing bytecode library $(notdir $@)
- $(VERB)$(INSTALL) $< $@
+uninstall-local::
+ $(Echo) Uninstalling $(BuildMode) Bytecode Archive $(DestBytecodeLib)
+ -$(Verb) $(RM) -f $(DestBytecodeLib)
endif
-# Does the library want a .o version built?
+#---------------------------------------------------------
+# ReLinked Library Targets:
+# If the user didn't explicitly forbid building a
+# relinked then we provide targets for building them.
+#---------------------------------------------------------
ifndef DONT_BUILD_RELINKED
-all:: $(LIBNAME_O)
-$(LIBNAME_O): $(BUILT_SOURCES) $(ObjectsO) $(LIBDIR)/.dir
- @$(ECHO) Linking object $(notdir $@)
- $(VERB) $(Relink) -o $@ $(ObjectsO)
+all-local:: $(LibName.O)
+
+$(LibName.O): $(ObjectsO) $(LibDir)/.dir
+ $(Echo) Linking $(BuildMode) Object Library $(notdir $@)
+ $(Verb) $(Relink) -o $@ $(ObjectsO)
+
+clean-local::
+ifneq ($(strip $(LibName.O)),)
+ -$(Verb) $(RM) -f $(LibName.O)
+endif
+
+DestRelinkedLib = $(libdir)/$(LIBRARYNAME).o
-install:: $(DESTDIR)$(libdir)/$(LIBRARYNAME).o
+install-local:: $(DestRelinkedLib)
-$(DESTDIR)$(libdir)/$(LIBRARYNAME).o: $(LIBNAME_O)
- @$(ECHO) Installing object library $(notdir $@)
- $(VERB) $(MKDIR) $(DESTDIR)$(libdir)
- $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_O) $(DESTDIR)$(libdir)/$(LIBRARYNAME).o
+$(DestRelinkedLib): $(libdir) $(LibName.O)
+ $(Echo) Installing $(BuildMode) Object Library $(DestRelinkedLib)
+ $(Verb) $(LTInstall) $(LibName.O) $(DestRelinkedLib)
-clean::
- $(VERB) $(RM) -f $(LIBNAME_O)
+uninstall-local::
+ $(Echo) Uninstalling $(BuildMode) Object Library $(DestRelinkedLib)
+ -$(Verb) $(RM) -f $(DestRelinkedLib)
endif
-# Does the library want an archive version built?
+#---------------------------------------------------------
+# Archive Library Targets:
+# If the user wanted a regular archive library built,
+# then we provide targets for building them.
+#---------------------------------------------------------
ifdef BUILD_ARCHIVE
-all:: $(LIBNAME_A)
-$(LIBNAME_A): $(BUILT_SOURCES) $(ObjectsO) $(LIBDIR)/.dir
- @$(ECHO) Linking archive $(notdir $@) library
- $(VERB)$(RM) -f $@
- $(VERB) $(Archive) $@ $(ObjectsO)
- $(VERB) $(Ranlib) $@
+all-local:: $(LibName.A)
-clean::
- $(VERB) $(RM) -f $(LIBNAME_A)
+$(LibName.A): $(ObjectsO) $(LibDir)/.dir
+ $(Echo) Building $(BuildMode) Archive Library $(notdir $@)
+ -$(Verb) $(RM) -f $@
+ $(Verb) $(Archive) $@ $(ObjectsO)
+ $(Verb) $(Ranlib) $@
+
+clean-local::
+ifneq ($(strip $(LibName.A)),)
+ -$(Verb) $(RM) -f $(LibName.A)
+endif
-install:: $(DESTDIR)$(libdir)/lib$(LIBRARYNAME).a
+DestArchiveLib := $(libdir)/lib$(LIBRARYNAME).a
+
+install-local:: $(DestArchiveLib)
+
+$(DestArchiveLib): $(libdir) $(LibName.A)
+ $(Echo) Installing $(BuildMode) Archive Library $(DestArchiveLib)
+ $(Verb) $(MKDIR) $(libdir)
+ $(Verb) $(LTInstall) $(LibName.A) $(DestArchiveLib)
+
+uninstall-local::
+ $(Echo) Uninstalling $(BuildMode) Archive Library $(DestArchiveLib)
+ -$(Verb) $(RM) -f $(DestArchiveLib)
-$(DESTDIR)$(libdir)/lib$(LIBRARYNAME).a: $(LIBNAME_A)
- $(MKDIR) $(DESTDIR)$(libdir)
- $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_A) $(DESTDIR)$(libdir)/lib$(LIBRARYNAME).a
endif
-# if LIBRARYNAME
+# endif LIBRARYNAME
endif
-#------------------------------------------------------------------------
-# Handle the TOOLNAME option - used when building tool executables...
-#------------------------------------------------------------------------
-#
-# The TOOLNAME option should be used with a USEDLIBS variable that tells the
-# libraries (and the order of the libs) that should be linked to the
-# tool. USEDLIBS should contain a list of library names (some with .a extension)
-# that are automatically linked in as .o files unless the .a suffix is added.
-#
+###############################################################################
+# Tool Build Rules: Build executable tool based on TOOLNAME option
+###############################################################################
+
ifdef TOOLNAME
-# TOOLLINKOPTSB to pass options to the linker like library search path etc
-# Note that this is different from TOOLLINKOPTS, these options
-# are passed to the linker *before* the USEDLIBS options are passed.
-# e.g. usage TOOLLINKOPTSB = -L/home/xxx/lib
-ifdef TOOLLINKOPTSB
-Link += $(TOOLLINKOPTSB)
+#---------------------------------------------------------
+# Handle the special "JIT" value for LLVM_LIBS which is a
+# shorthand for a bunch of libraries that get the correct
+# JIT support for a tool that runs JIT.
+#---------------------------------------------------------
+ifeq ($(LLVMLIBS),JIT)
+
+# Make sure we can get our own symbols in the tool
+Link += -dlopen self
+
+# Generic JIT libraries
+JIT_LIBS := LLVMInterpreter LLVMJIT LLVMCodeGen LLVMExecutionEngine
+
+# You can enable the X86 JIT on a non-X86 host by setting the flag
+# ENABLE_X86_JIT on the make command line. If not, it will still be
+# enabled automagically on an X86 host.
+ifeq ($(ARCH), x86)
+ ENABLE_X86_JIT = 1
endif
-# TOOLEXENAME* - These compute the output filenames to generate...
-TOOLEXENAME := $(TOOLDIR)/$(TOOLNAME)
+# What the X86 JIT requires
+ifdef ENABLE_X86_JIT
+ JIT_LIBS += LLVMX86
+endif
-# USED_LIBS_OPTIONS - Compute the options line that add -llib1 -llib2, etc.
-PROJ_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
-PROJ_LIBS_OPTIONS := $(patsubst %.o, $(LIBDIR)/%.o, $(PROJ_LIBS_OPTIONS))
-LLVM_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS)))
-LLVM_LIBS_OPTIONS := $(patsubst %.o, $(LLVMLIBDIR)/%.o, $(LLVM_LIBS_OPTIONS))
+# You can enable the SparcV9 JIT on a non-SparcV9 host by setting the flag
+# ENABLE_SPARCV9_JIT on the make command line. If not, it will still be
+# enabled automagically on an SparcV9 host.
+ifeq ($(ARCH), Sparc)
+ ENABLE_SPARCV9_JIT = 1
+endif
-PROJ_USED_LIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
-LLVM_USED_LIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS)))
-PROJ_LIBS_PATHS := $(addprefix $(LIBDIR)/,$(PROJ_USED_LIBS))
-LLVM_LIBS_PATHS := $(addprefix $(LLVMLIBDIR)/,$(LLVM_USED_LIBS))
+# What the Sparc JIT requires
+ifdef ENABLE_SPARCV9_JIT
+ JIT_LIBS += LLVMSparcV9 LLVMSparcV9ModuloSched LLVMSparcV9InstrSched \
+ LLVMSparcV9LiveVar LLVMInstrumentation.a LLVMProfilePaths \
+ LLVMBCWriter LLVMTransforms.a LLVMipo.a LLVMipa.a \
+ LLVMDataStructure.a LLVMSparcV9RegAlloc
+endif
-LINK_OPTS := $(TOOLLINKOPTS) $(PROJ_LIBS_OPTIONS) $(LLVM_LIBS_OPTIONS)
+# You can enable the PowerPC JIT on a non-PowerPC host by setting the flag
+# ENABLE_PPC_JIT on the make command line. If not, it will still be
+# enabled automagically on an PowerPC host.
+ifeq ($(ARCH), PowerPC)
+ ENABLE_PPC_JIT = 1
+endif
-#
-# Libtool link options:
-# Ensure that all binaries have their symbols exported so that they can
-# by dlsym'ed.
-#
+# What the PowerPC JIT requires
+ifdef ENABLE_PPC_JIT
+ JIT_LIBS += LLVMPowerPC
+endif
+
+LLVMLIBS := $(JIT_LIBS) LLVMScalarOpts LLVMAnalysis.a LLVMTransformUtils.a \
+ LLVMBCReader LLVMCore LLVMSupport.a LLVMTarget.a LLVMbzip2 \
+ LLVMSystem.a $(PLATFORMLIBDL)
+endif
+
+#---------------------------------------------------------
+# Set up variables for building a tool.
+#---------------------------------------------------------
+ifdef EXAMPLE_TOOL
+ToolBuildPath := $(ExmplDir)/$(TOOLNAME)$(EXEEXT)
+else
+ToolBuildPath := $(ToolDir)/$(TOOLNAME)$(EXEEXT)
+endif
+ProjLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
+ProjLibsOptions := $(patsubst %.o, $(LibDir)/%.o, $(ProjLibsOptions))
+LLVMLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS)))
+LLVMLibsOptions := $(patsubst %.o, $(LLVMLibDir)/%.o, $(LLVMLibsOptions))
+ProjUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
+LLVMUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS)))
+ProjLibsPaths := $(addprefix $(LibDir)/,$(ProjUsedLibs))
+LLVMLibsPaths := $(addprefix $(LLVMLibDir)/,$(LLVMUsedLibs))
+
+#---------------------------------------------------------
+# Tell make that we need to rebuild subdirectories before
+# we can link the tool. This affects things like LLI which
+# has library subdirectories.
+#---------------------------------------------------------
+$(ToolBuildPath): $(addsuffix /.makeall, $(PARALLEL_DIRS))
+
+#---------------------------------------------------------
+# Provide targets for building the tools
+#---------------------------------------------------------
+all-local:: $(ToolBuildPath)
-# Handle compression libraries automatically
-ifeq ($(HAVE_BZIP2),1)
-LIBS += -lbz2
+clean-local::
+ifneq ($(strip $(ToolBuildPath)),)
+ -$(Verb) $(RM) -f $(ToolBuildPath)
endif
-ifeq ($(HAVE_ZLIB),1)
-LIBS += -lz
+
+ifdef EXAMPLE_TOOL
+$(ToolBuildPath): $(ExmplDir)/.dir
+else
+$(ToolBuildPath): $(ToolDir)/.dir
endif
-# Tell make that we need to rebuild subdirectories before we can link the tool.
-# This affects things like LLI which has library subdirectories.
-$(LIBS): $(addsuffix /.makeall, $(PARALLEL_DIRS))
+$(ToolBuildPath): $(ObjectsO) $(ProjLibsPaths) $(LLVMLibsPaths)
+ $(Echo) Linking $(BuildMode) executable $(TOOLNAME) $(StripWarnMsg)
+ $(Verb) $(Link) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(ProjLibsOptions) \
+ $(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB)
+ $(Echo) ======= Finished Linking $(BuildMode) Executable $(TOOLNAME) $(StripWarnMsg)
+
+DestTool = $(bindir)/$(TOOLNAME)
-all:: $(TOOLEXENAME)
+install-local:: $(DestTool)
-clean::
- $(VERB) $(RM) -f $(TOOLEXENAME)
+$(DestTool): $(bindir) $(ToolBuildPath)
+ $(Echo) Installing $(BuildMode) $(DestTool)
+ $(Verb) $(INSTALL) $(ToolBuildPath) $(DestTool)
-$(TOOLEXENAME): $(BUILT_SOURCES) $(ObjectsO) $(PROJ_LIBS_PATHS) $(LLVM_LIBS_PATHS) $(TOOLDIR)/.dir
- @$(ECHO) Linking $(CONFIGURATION) executable $(TOOLNAME) $(STRIP_WARN_MSG)
- $(VERB) $(Link) -o $@ $(ObjectsO) $(PROJ_LIBS_OPTIONS) $(LLVM_LIBS_OPTIONS) $(LIBS)
- @$(ECHO) ======= Finished linking $(CONFIGURATION) executable $(TOOLNAME) $(STRIP_WARN_MSG)
+uninstall-local::
+ $(Echo) Uninstalling $(BuildMode) $(DestTool)
+ -$(Verb) $(RM) -f $(DestTool)
-install:: $(TOOLEXENAME)
- @$(ECHO) Installing $(TOOLNAME)
- $(VERB) $(INSTALL) $(TOOLEXENAME) $(DESTDIR)/bin
endif
+###############################################################################
+# Object Build Rules: Build object files based on sources
+###############################################################################
+
+# Provide rule sets for when dependency generation is enabled
ifndef DISABLE_AUTO_DEPENDENCIES
-# Create .lo files in the OBJDIR directory from the .cpp and .c files...
-$(OBJDIR)/%.lo: %.cpp $(OBJDIR)/.dir
- @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Shared Library"
- $(VERB) if $(LTCXXCompile) -MD -MT $@ -MP -MF $(OBJDIR)/$*.Td $< -o $@ ; \
- then mv -f "$(OBJDIR)/$*.Td" "$(OBJDIR)/$*.d"; else rm -f "$(OBJDIR)/$*.Td"; exit 1; fi
-
-$(OBJDIR)/%.o: %.cpp $(OBJDIR)/.dir
- @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Archive"
- $(VERB) if $(CXXCompile) -MD -MT $@ -MP -MF $(OBJDIR)/$*.Td $< -o $@ ; \
- then mv -f "$(OBJDIR)/$*.Td" "$(OBJDIR)/$*.d"; else rm -f "$(OBJDIR)/$*.Td"; exit 1; fi
-
-$(OBJDIR)/%.lo: %.c $(OBJDIR)/.dir
- @$(ECHO) "Compiling $(CONFIGURATION) $*.c For Shared Library"
- $(VERB) if $(LTCCompile) -MD -MT $@ -MP -MF $(OBJDIR)/$*.Td $< -o $@ ; \
- then mv -f "$(OBJDIR)/$*.Td" "$(OBJDIR)/$*.d"; else rm -f "$(OBJDIR)/$*.Td"; exit 1; fi
-
-$(OBJDIR)/%.o: %.c $(OBJDIR)/.dir
- @$(ECHO) "Compiling $(CONFIGURATION) $*.c For Archive"
- $(VERB) if $(CCompile) -MD -MT $@ -MP -MF $(OBJDIR)/$*.Td $< -o $@ ; \
- then mv -f "$(OBJDIR)/$*.Td" "$(OBJDIR)/$*.d"; else rm -f "$(OBJDIR)/$*.Td"; exit 1; fi
-
-# Create .bc files in the OBJDIR directory from .cpp and .c files...
-$(OBJDIR)/%.bc: %.cpp $(OBJDIR)/.dir
- @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp to bytecode"
- $(VERB) if $(BCCXXCompile) -MD -MT $@ -MP -MF "$(OBJDIR)/$*.Td" $< -o $@ ; \
- then mv -f "$(OBJDIR)/$*.Td" "$(OBJDIR)/$*.d"; else rm -f "$(OBJDIR)/$*.Td"; exit 1; fi
-
-$(OBJDIR)/%.bc: %.c $(OBJDIR)/.dir
- @$(ECHO) "Compiling $(CONFIGURATION) $*.c to bytecode"
- $(VERB) if $(BCCCompile) -MD -MT $@ -MP -MF "$(OBJDIR)/$*.Td" $< -o $@ ; \
- then mv -f "$(OBJDIR)/$*.Td" "$(OBJDIR)/$*.d"; else rm -f "$(OBJDIR)/$*.Tpo"; exit 1; fi
+#---------------------------------------------------------
+# Create .lo files in the ObjDir directory from the .cpp and .c files...
+#---------------------------------------------------------
+ifdef SHARED_LIBRARY
+
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)"
+ $(Verb) if $(LTCompile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACXXd $< -o $@ ; \
+ then $(MV) -f "$(ObjDir)/$*.LACXXd" "$(ObjDir)/$*.d"; \
+ else $(RM) -f "$(ObjDir)/$*.LACXXd"; exit 1; fi
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.c for $(BuildMode) build (PIC)"
+ $(Verb) if $(LTCompile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACd $< -o $@ ; \
+ then $(MV) -f "$(ObjDir)/$*.LACd" "$(ObjDir)/$*.d"; \
+ else $(RM) -f "$(ObjDir)/$*.LACd"; exit 1; fi
+
+#---------------------------------------------------------
+# Create .o files in the ObjDir directory from the .cpp and .c files...
+#---------------------------------------------------------
else
-$(OBJDIR)/%.lo: %.cpp $(OBJDIR)/.dir
- @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Shared Library"
- $(LTCXXCompile) $< -o $@
+$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cpp for $(BuildMode) build"
+ $(Verb) if $(Compile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.CXXd $< -o $@ ; \
+ then $(MV) -f "$(ObjDir)/$*.CXXd" "$(ObjDir)/$*.d"; \
+ else $(RM) -f "$(ObjDir)/$*.CXXd"; exit 1; fi
-$(OBJDIR)/%.o: %.cpp $(OBJDIR)/.dir
- @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Archive"
- $(CXXCompile) $< -o $@
+$(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.c for $(BuildMode) build"
+ $(Verb) if $(Compile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.Cd $< -o $@ ; \
+ then $(MV) -f "$(ObjDir)/$*.Cd" "$(ObjDir)/$*.d"; \
+ else $(RM) -f "$(ObjDir)/$*.Cd"; exit 1; fi
-$(OBJDIR)/%.lo: %.c $(OBJDIR)/.dir
- @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Shared Library"
- $(LTCCompile) $< -o $@
+endif
-$(OBJDIR)/%.o: %.c $(OBJDIR)/.dir
- @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Archive"
- $(CCompile) $< -o $@
+#---------------------------------------------------------
+# Create .bc files in the ObjDir directory from .cpp and .c files...
+#---------------------------------------------------------
+$(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)"
+ $(Verb) if $(BCCompile.CXX) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCXXd" $< -o $@ ; \
+ then $(MV) -f "$(ObjDir)/$*.BCCXXd" "$(ObjDir)/$*.d"; \
+ else $(RM) -f "$(ObjDir)/$*.BCCXXd"; exit 1; fi
+
+$(ObjDir)/%.bc: %.c $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)"
+ $(Verb) if $(BCCompile.C) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCd" $< -o $@ ; \
+ then $(MV) -f "$(ObjDir)/$*.BCCd" "$(ObjDir)/$*.d"; \
+ else $(RM) -f "$(ObjDir)/$*.BCCd"; exit 1; fi
+
+# Provide alternate rule sets if dependencies are disabled
+else
-# Create .bc files in the OBJDIR directory from .cpp and .c files...
-$(OBJDIR)/%.bc: %.cpp $(OBJDIR)/.dir
- @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp To Bytecode"
- $(BCCompileCPP) $< -o $@
+ifdef SHARED_LIBRARY
-$(OBJDIR)/%.bc: %.c $(OBJDIR)/.dir
- @$(ECHO) "Compiling $(CONFIGURATION) $*.c To Bytecode"
- $(BCCompileC) $< -o $@
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)"
+ $(LTCompile.CXX) $< -o $@
-endif
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.c for $(BuildMode) build (PIC)"
+ $(LTCompile.C) $< -o $@
-$(OBJDIR)/%.bc: %.ll $(OBJDIR)/.dir $(LLVMAS)
- @$(ECHO) "Compiling $*.ll To Bytecode"
- $(VERB) $(LLVMAS) $< -f -o $@
+else
-ifdef TARGET
+$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cpp for $(BuildMode) build"
+ $(Compile.CXX) $< -o $@
-TDFILES := $(strip $(wildcard $(BUILD_SRC_DIR)/*.td) $(BUILD_SRC_ROOT)/lib/Target/Target.td)
+$(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.c for $(BuildMode) build"
+ $(Compile.C) $< -o $@
+endif
-$(BUILT_SOURCES): $(TDFILES)
+$(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)"
+ $(BCCompile.CXX) $< -o $@
-%GenRegisterNames.inc : %.td
- @echo "Building $(<F) register names with tblgen"
- $(VERB) $(TableGen) -gen-register-enums -o $@ $<
+$(ObjDir)/%.bc: %.c $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)"
+ $(BCCompile.C) $< -o $@
-%GenRegisterInfo.h.inc : %.td
- @echo "Building $(<F) register information header with tblgen"
- $(VERB) $(TableGen) -gen-register-desc-header -o $@ $<
+endif
-%GenRegisterInfo.inc : %.td
- @echo "Building $(<F) register info implementation with tblgen"
- $(VERB) $(TableGen) -gen-register-desc -o $@ $<
+#---------------------------------------------------------
+# Provide rule to build .bc files from .ll sources,
+# regardless of dependencies
+#---------------------------------------------------------
+$(ObjDir)/%.bc: %.ll $(ObjDir)/.dir $(LLVMAS)
+ $(Echo) "Compiling $*.ll for $(BuildMode) build"
+ $(Verb) $(LLVMAS) $< -f -o $@
-%GenInstrNames.inc : %.td
- @echo "Building $(<F) instruction names with tblgen"
- $(VERB) $(TableGen) -gen-instr-enums -o $@ $<
+###############################################################################
+# TABLEGEN: Provide rules for running tblgen to produce *.inc files
+###############################################################################
-%GenInstrInfo.inc : %.td
- @echo "Building $(<F) instruction information with tblgen"
- $(VERB) $(TableGen) -gen-instr-desc -o $@ $<
+ifdef TARGET
-%GenAsmWriter.inc : %.td
- @echo "Building $(<F) assembly writer with tblgen"
- $(VERB) $(TableGen) -gen-asm-writer -o $@ $<
+TDFiles := $(strip $(wildcard $(BUILD_SRC_DIR)/*.td) $(LLVM_SRC_ROOT)/lib/Target/Target.td)
+INCFiles := $(filter %.inc,$(BUILT_SOURCES))
+INCTMPFiles := $(INCFiles:%=$(ObjDir)/%.tmp)
+.PRECIOUS: $(INCTMPFiles) $(INCFiles)
+
+# All of these files depend on tblgen and the .td files.
+$(INCTMPFiles) : $(TBLGEN) $(TDFiles)
+
+# INCFiles rule: All of the tblgen generated files are emitted to
+# $(ObjDir)/%.inc.tmp, instead of emitting them directly to %.inc. This allows
+# us to only "touch" the real file if the contents of it change. IOW, if
+# tblgen is modified, all of the .inc.tmp files are regereated, but no
+# dependencies of the .inc files are, unless the contents of the .inc file
+# changes.
+$(INCFiles) : %.inc : $(ObjDir)/%.inc.tmp
+ $(Verb) $(CMP) -s $@ $< || $(CP) $< $@
+
+$(TARGET:%=$(ObjDir)/%GenRegisterNames.inc.tmp): \
+$(ObjDir)/%GenRegisterNames.inc.tmp : %.td $(ObjDir)/.dir
+ $(Echo) "Building $(<F) register names with tblgen"
+ $(Verb) $(TableGen) -gen-register-enums -o $@ $<
+
+$(TARGET:%=$(ObjDir)/%GenRegisterInfo.h.inc.tmp): \
+$(ObjDir)/%GenRegisterInfo.h.inc.tmp : %.td $(ObjDir)/.dir
+ $(Echo) "Building $(<F) register information header with tblgen"
+ $(Verb) $(TableGen) -gen-register-desc-header -o $@ $<
+
+$(TARGET:%=$(ObjDir)/%GenRegisterInfo.inc.tmp): \
+$(ObjDir)/%GenRegisterInfo.inc.tmp : %.td $(ObjDir)/.dir
+ $(Echo) "Building $(<F) register info implementation with tblgen"
+ $(Verb) $(TableGen) -gen-register-desc -o $@ $<
+
+$(TARGET:%=$(ObjDir)/%GenInstrNames.inc.tmp): \
+$(ObjDir)/%GenInstrNames.inc.tmp : %.td $(ObjDir)/.dir
+ $(Echo) "Building $(<F) instruction names with tblgen"
+ $(Verb) $(TableGen) -gen-instr-enums -o $@ $<
+
+$(TARGET:%=$(ObjDir)/%GenInstrInfo.inc.tmp): \
+$(ObjDir)/%GenInstrInfo.inc.tmp : %.td $(ObjDir)/.dir
+ $(Echo) "Building $(<F) instruction information with tblgen"
+ $(Verb) $(TableGen) -gen-instr-desc -o $@ $<
+
+$(TARGET:%=$(ObjDir)/%GenAsmWriter.inc.tmp): \
+$(ObjDir)/%GenAsmWriter.inc.tmp : %.td $(ObjDir)/.dir
+ $(Echo) "Building $(<F) assembly writer with tblgen"
+ $(Verb) $(TableGen) -gen-asm-writer -o $@ $<
+
+$(TARGET:%=$(ObjDir)/%GenAsmWriter1.inc.tmp): \
+$(ObjDir)/%GenAsmWriter1.inc.tmp : %.td $(ObjDir)/.dir
+ $(Echo) "Building $(<F) assembly writer #1 with tblgen"
+ $(Verb) $(TableGen) -gen-asm-writer -asmwriternum=1 -o $@ $<
+
+$(TARGET:%=$(ObjDir)/%GenCodeEmitter.inc.tmp): \
+$(ObjDir)/%GenCodeEmitter.inc.tmp: %.td $(ObjDir)/.dir
+ $(Echo) "Building $(<F) code emitter with tblgen"
+ $(Verb) $(TableGen) -gen-emitter -o $@ $<
+
+clean-local::
+ -$(Verb) $(RM) -f $(INCFiles)
-%GenATTAsmWriter.inc : %.td
- @echo "Building $(<F) AT&T assembly writer with tblgen"
- $(VERB) $(TableGen) -gen-asm-writer -o $@ $<
+endif
-%GenIntelAsmWriter.inc : %.td
- @echo "Building $(<F) Intel assembly writer with tblgen"
- $(VERB) $(TableGen) -gen-asm-writer -asmwriternum=1 -o $@ $<
+###############################################################################
+# LEX AND YACC: Provide rules for generating sources with lex and yacc
+###############################################################################
-%GenInstrSelector.inc: %.td
- @echo "Building $(<F) instruction selector with tblgen"
- $(VERB) $(TableGen) -gen-instr-selector -o $@ $<
+#---------------------------------------------------------
+# Provide rules for generating a .cpp source file from
+# (f)lex input sources.
+#---------------------------------------------------------
-%GenCodeEmitter.inc:: %.td
- @echo "Building $(<F) code emitter with tblgen"
- $(VERB) $(TableGen) -gen-emitter -o $@ $<
+LexFiles := $(filter %.l,$(Sources))
-clean::
- $(VERB) rm -f *.inc
+ifneq ($(LexFiles),)
-endif
+LexOutput := $(strip $(patsubst %.l,%.cpp,$(LexFiles)))
-#
-# Rules for building lex/yacc files
-#
-LEX_FILES = $(filter %.l, $(Source))
-LEX_OUTPUT = $(LEX_FILES:%.l=%.cpp)
-YACC_FILES = $(filter %.y, $(Source))
-YACC_OUTPUT = $(addprefix $(YACC_FILES:%.y=%), .h .cpp .output)
-.PRECIOUS: $(LEX_OUTPUT) $(YACC_OUTPUT)
-
-# Create a .cpp source file from a flex input file... this uses sed to cut down
-# on the warnings emited by GCC...
-#
-# The last line is a gross hack to work around flex aparently not being able to
-# resize the buffer on a large token input. Currently, for uninitialized string
-# buffers in LLVM we can generate very long tokens, so this is a hack around it.
+.PRECIOUS: $(LexOutput)
+
+# Note the extra sed filtering here, used to cut down on the warnings emited
+# by GCC. The last line is a gross hack to work around flex aparently not
+# being able to resize the buffer on a large token input. Currently, for
+# uninitialized string buffers in LLVM we can generate very long tokens, so
+# this is a hack around it.
# FIXME. (f.e. char Buffer[10000] )
-#
%.cpp: %.l
- @$(ECHO) Flexing $<
- $(VERB) $(FLEX) -t $< | \
- $(SED) '/^find_rule/d' | \
+ $(Echo) Flexing $*.l
+ $(Verb) $(FLEX) -t $< | \
$(SED) 's/void yyunput/inline void yyunput/' | \
$(SED) 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \
$(SED) 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' \
- > $@.tmp
- $(VERB) cmp -s $@ $@.tmp > /dev/null || $(MV) -f $@.tmp $@
- @# remove the output of flex if it didn't get moved over...
- @rm -f $@.tmp
+ > $@
+
+clean-local::
+ -$(Verb) $(RM) -f $(LexOutput)
+ $(Verb) $(RM) -f $(LexOutput)
+
+endif
+
+#---------------------------------------------------------
+# Provide rules for generating a .cpp and .h source files
+# from yacc (bison) input sources.
+#---------------------------------------------------------
+
+YaccFiles := $(filter %.y,$(Sources))
+ifneq ($(YaccFiles),)
+YaccOutput := $(addprefix $(patsubst %.y,%,$(YaccFiles)),.h .cpp .output)
+
+.PRECIOUS: $(YaccOutput)
+
+# Cancel built-in rules for yacc
+%.c: %.y
+%.cpp: %.y
+%.h: %.y
# Rule for building the bison parsers...
-%.c: %.y # Cancel built-in rules for yacc
-%.h: %.y # Cancel built-in rules for yacc
%.cpp %.h : %.y
- @$(ECHO) "Bisoning $*.y"
- $(VERB) $(BISON) -v -d -p $(<F:%Parser.y=%) -o $*.tab.c $<
- $(VERB) cmp -s $*.tab.c $*.cpp > /dev/null || $(MV) -f $*.tab.c $*.cpp
- $(VERB) cmp -s $*.tab.h $*.h > /dev/null || $(MV) -f $*.tab.h $*.h
- @# If the files were not updated, don't leave them lying around...
- @rm -f $*.tab.c $*.tab.h
-
-# To create the directories...
-%/.dir:
- $(VERB) $(MKDIR) $* > /dev/null
- @$(DATE) > $@
+ $(Echo) "Bisoning $*.y"
+ $(Verb) $(BISON) -v -d -p $(<F:%Parser.y=%) -o $*.tab.c $<
+ $(Verb) $(MV) -f $*.tab.c $*.cpp
+ $(Verb) $(MV) -f $*.tab.h $*.h
+
+clean-local::
+ -$(Verb) $(RM) -f $(YaccOutput)
+ $(Verb) $(RM) -f $(YaccOutput)
+endif
-.PRECIOUS: $(OBJDIR)/.dir $(LIBDIR)/.dir $(TOOLDIR)/.dir $(LLVMLIBDIR)/.dir
-.PRECIOUS: $(LLVMTOOLDIR)/.dir
+###############################################################################
+# OTHER RULES: Other rules needed
+###############################################################################
# To create postscript files from dot files...
ifneq ($(DOT),false)
$(DOT) -Tps < $< > $@
else
%.ps: %.dot
- $(ECHO) "Cannot build $@: The program dot is not installed"
+ $(Echo) "Cannot build $@: The program dot is not installed"
endif
-#
# This rules ensures that header files that are removed still have a rule for
# which they can be "generated." This allows make to ignore them and
# reproduce the dependency lists.
-#
%.h:: ;
-# 'make clean' nukes the tree
-clean::
- $(VERB) $(RM) -rf $(OBJDIR)
- $(VERB) $(RM) -f core core.[0-9][0-9]* *.o *.d *~ *.flc
+# Define clean-local to clean the current directory. Note that this uses a
+# very conservative approach ensuring that empty variables do not cause
+# errors or disastrous removal.
+clean-local::
+ifneq ($(strip $(ObjDir)),)
+ -$(Verb) $(RM) -rf $(ObjDir)
+endif
+ -$(Verb) $(RM) -f core core.[0-9][0-9]* *.o *.d *~ *.flc
ifneq ($(strip $(SHLIBEXT)),) # Extra paranoia - make real sure SHLIBEXT is set
- $(VERB) $(RM) -f *$(SHLIBEXT)
+ -$(Verb) $(RM) -f *$(SHLIBEXT)
endif
- $(VERB) $(RM) -f $(LEX_OUTPUT) $(YACC_OUTPUT)
-###########################################################################
-# C/C++ Dependencies
-# Define variables and rules that generate header file dependencies
-# from C/C++ source files.
-###########################################################################
+clean-all-local::
+ -$(Verb) $(RM) -rf Debug Release Profile
+# Build tags database for Emacs/Xemacs:
+tags:: TAGS CTAGS
+
+TAGS:
+ find $(BUILD_SRC_ROOT)/include $(BUILD_SRC_ROOT)/lib \
+ $(BUILD_SRC_ROOT)/tools $(BUILD_SRC_ROOT)/examples \
+ $(BUILD_OBJ_ROOT)/include $(BUILD_OBJ_ROOT)/lib \
+ $(BUILD_OBJ_ROOT)/tools $(BUILD_OBJ_ROOT)/examples \
+ -name '*.cpp' -o -name '*.h' | \
+ $(ETAGS) $(ETAGSFLAGS) -
+
+CTAGS:
+ find $(BUILD_SRC_ROOT)/include $(BUILD_SRC_ROOT)/lib \
+ $(BUILD_SRC_ROOT)/tools $(BUILD_SRC_ROOT)/examples \
+ $(BUILD_OBJ_ROOT)/include $(BUILD_OBJ_ROOT)/lib \
+ $(BUILD_OBJ_ROOT)/tools $(BUILD_OBJ_ROOT)/examples \
+ \( -name '*.cpp' -o -name '*.h' \) -print | \
+ ctags -ImtT -o $(BUILD_OBJ_ROOT)/CTAGS -L -
+
+
+###############################################################################
+# DEPENDENCIES: Include the dependency files if we should
+###############################################################################
ifndef DISABLE_AUTO_DEPENDENCIES
-# If dependencies were generated for the file that included this file,
-# include the dependencies now...
-#
+# If its not one of the cleaning targets
+ifneq ($strip($(filter-out clean clean-local dist-clean,$(MAKECMDGOALS))),)
-SourceBaseNames := $(basename $(Source))
-SourceDepend := $(SourceBaseNames:%=$(BUILD_OBJ_DIR)/$(CONFIGURATION)/%.d)
+# Get the list of dependency files
+DependFiles := $(basename $(filter %.cpp %.c %.cc, $(Sources)))
+DependFiles := $(patsubst %,$(BUILD_OBJ_DIR)/$(BuildMode)/%.d,$(DependFiles))
+
+-include /dev/null $(DependFiles)
-#
-# Include dependencies generated from C/C++ source files, but not if we
-# are cleaning (this example taken from the GNU Make Manual).
-#
-ifneq ($(MAKECMDGOALS),clean)
-ifneq ($(MAKECMDGOALS),distclean)
--include /dev/null $(SourceDepend)
-endif
endif
-endif # ifndef DISABLE_AUTO_DEPENDENCIES
+endif
###############################################################################
-# PRECONDITIONS - that which must be built/checked first
+# CHECK: Running the test suite
###############################################################################
-OBJMKFILE := $(BUILD_OBJ_DIR)/Makefile
-SRCMKFILE := $(BUILD_SRC_DIR)/Makefile
-CONFIGURE := $(LLVM_SRC_ROOT)/configure
-CONFIG_STATUS := $(LLVM_OBJ_ROOT)/config.status
-MAKE_CONFIG_IN := $(LLVM_SRC_ROOT)/Makefile.config.in
-MAKE_CONFIG := $(LLVM_OBJ_ROOT)/Makefile.config
+check::
+ $(Verb) if test -d "$(BUILD_OBJ_ROOT)/test" ; then \
+ if test -f "$(BUILD_OBJ_ROOT)/test/Makefile" ; then \
+ $(EchoCmd) Running test suite ; \
+ $(MAKE) -C $(BUILD_OBJ_ROOT)/test check-local \
+ TESTSUITE=$(TESTSUITE) ; \
+ else \
+ $(EchoCmd) No Makefile in test directory ; \
+ fi ; \
+ else \
+ $(EchoCmd) No test directory ; \
+ fi
+
+###############################################################################
+# DISTRIBUTION: Handle construction of a distribution tarball
+###############################################################################
#------------------------------------------------------------------------
-# List of the preconditions
-preconditions: $(CONFIG_STATUS) $(MAKE_CONFIG) $(OBJMKFILE)
+# Define distribution related variables
+#------------------------------------------------------------------------
+DistName := $(LLVM_TARBALL_NAME)
+DistDir := $(BUILD_OBJ_ROOT)/$(DistName)
+TopDistDir := $(BUILD_OBJ_ROOT)/$(DistName)
+DistTarGZip := $(BUILD_OBJ_ROOT)/$(DistName).tar.gz
+DistZip := $(BUILD_OBJ_ROOT)/$(DistName).zip
+DistTarBZ2 := $(BUILD_OBJ_ROOT)/$(DistName).tar.bz2
+DistAlways := CREDITS.TXT LICENSE.TXT README.txt README AUTHORS COPYING \
+ ChangeLog INSTALL NEWS Makefile Makefile.common Makefile.rules \
+ Makefile.config.in configure autoconf
+DistOther := $(notdir $(wildcard \
+ $(BUILD_SRC_DIR)/*.h \
+ $(BUILD_SRC_DIR)/*.td \
+ $(BUILD_SRC_DIR)/*.def \
+ $(BUILD_SRC_DIR)/*.ll \
+ $(BUILD_SRC_DIR)/*.in))
+DistSubDirs := $(SubDirs)
+DistSources = $(Sources) $(EXTRA_DIST)
+DistFiles = $(DistAlways) $(DistSources) $(DistOther)
-all dist distcheck install:: $(BUILT_SOURCES)
+#------------------------------------------------------------------------
+# We MUST build distribution with OBJ_DIR != SRC_DIR
+#------------------------------------------------------------------------
+ifeq ($(BUILD_SRC_DIR),$(BUILD_OBJ_DIR))
+dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip ::
+ $(Echo) ERROR: Target $@ only available with OBJ_DIR != SRC_DIR
-clean::
- $(VERB) $(RM) -f $(BUILT_SOURCES)
+else
#------------------------------------------------------------------------
-# Make sure we're not using a stale configuration
-.PRECIOUS: $(CONFIG_STATUS)
-$(CONFIG_STATUS): $(CONFIGURE)
- @$(ECHO) Reconfiguring with $@
- $(VERB) $(CONFIG_STATUS) --recheck
+# Prevent catastrophic remove
+#------------------------------------------------------------------------
+ifeq ($(LLVM_TARBALL_NAME),)
+$(error LLVM_TARBALL_NAME is empty. Please rerun configure)
+endif
#------------------------------------------------------------------------
-# Make sure the configuration makefile is up to date
-$(MAKE_CONFIG): $(MAKE_CONFIG_IN)
- @$(ECHO) Regenerating $@
- $(VERB) cd $(LLVM_OBJ_ROOT) ; $(CONFIG_STATUS) Makefile.config
- $(VERB) $(MAKE) $(MAKEFLAGS) $(MAKECMDGOALS)
- @exit 0;
+# Prevent attempt to run dist targets from anywhere but the top level
+#------------------------------------------------------------------------
+ifneq ($(LEVEL),.)
+
+dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip ::
+ $(Echo) ERROR: You must run $@ from $(BUILD_OBJ_ROOT)
+
+else
#------------------------------------------------------------------------
-# If the Makefile in the source tree has been updated, copy it over into the
-# build tree.
-.PRECIOUS: $(OBJMKFILE)
-$(OBJMKFILE): $(SRCMKFILE)
- @$(ECHO) "Updating Makefile from : $(dir $<)"
- $(VERB) $(MKDIR) $(@D)
- $(VERB) cp -f $< $@
- $(VERB) $(MAKE) $(MAKEFLAGS) $(MAKECMDGOALS)
- @exit 0;
+# Provide the top level targets
+#------------------------------------------------------------------------
+
+dist-gzip:: $(DistTarGZip)
+
+$(DistTarGZip) : $(TopDistDir)/.makedistdir
+ $(Echo) Packing gzipped distribution tar file.
+ $(Verb) cd $(BUILD_OBJ_ROOT) ; $(TAR) chf - "$(DistName)" | \
+ $(GZIP) -c > "$(DistTarGZip)"
+
+dist-bzip2:: $(DistTarBZ2)
+
+$(DistTarBZ2) : $(TopDistDir)/.makedistdir
+ $(Echo) Packing bzipped distribution tar file.
+ $(Verb) cd $(BUILD_OBJ_ROOT) ; $(TAR) chf - $(DistName) | \
+ $(BZIP2) -c >$(DistTarBZ2)
+
+dist-zip:: $(DistZip)
+
+$(DistZip) : $(TopDistDir)/.makedistdir
+ $(Echo) Packing zipped distribution file.
+ $(Verb) rm -f $(DistZip)
+ $(Verb) cd $(BUILD_OBJ_ROOT) ; $(ZIP) -rq $(DistZip) $(DistName)
+
+dist :: $(DistTarGZip) $(DistTarBZ2) $(DistZip)
+ $(Echo) ===== DISTRIBUTION PACKAGING SUCESSFUL =====
+
+DistCheckDir := $(LLVM_OBJ_ROOT)/_distcheckdir
+
+dist-check:: $(DistTarGZip)
+ $(Echo) Checking distribution tar file.
+ $(Verb) if test -d $(DistCheckDir) ; then \
+ $(RM) -rf $(DistCheckDir) ; \
+ fi
+ $(Verb) $(MKDIR) $(DistCheckDir)
+ $(Verb) cd $(DistCheckDir) && \
+ $(MKDIR) $(DistCheckDir)/build && \
+ $(MKDIR) $(DistCheckDir)/install && \
+ gunzip -c $(DistTarGZip) | $(TAR) xf - && \
+ cd build && \
+ ../$(DistName)/configure --prefix="$(DistCheckDir)/install" \
+ --srcdir=../$(DistName) && \
+ $(MAKE) all && \
+ $(MAKE) check && \
+ $(MAKE) install && \
+ $(MAKE) uninstall && \
+ $(MAKE) dist && \
+ $(MAKE) clean && \
+ $(MAKE) dist-clean && \
+ $(EchoCmd) ===== $(DistTarGZip) Ready For Distribution =====
+
+dist-clean::
+ $(Echo) Cleaning distribution files
+ -$(Verb) $(RM) -rf $(DistTarGZip) $(DistTarBZ2) $(DistZip) $(DistName) \
+ $(DistCheckDir)
+
+endif
+
+#------------------------------------------------------------------------
+# Provide the recursive distdir target for building the distribution directory
+#------------------------------------------------------------------------
+distdir: $(DistDir)/.makedistdir
+$(DistDir)/.makedistdir: $(DistSources)
+ $(Verb) if test "$(DistDir)" = "$(TopDistDir)" ; then \
+ if test -d "$(DistDir)" ; then \
+ find $(DistDir) -type d ! -perm -200 -exec chmod u+w {} ';' || \
+ exit 1 ; \
+ fi ; \
+ $(EchoCmd) Removing old $(DistDir) ; \
+ $(RM) -rf $(DistDir); \
+ $(EchoCmd) Making 'all' to verify build ; \
+ $(MAKE) all ; \
+ fi
+ $(Echo) Building Distribution Directory $(DistDir)
+ $(Verb) $(MKDIR) $(DistDir)
+ $(Verb) srcdirstrip=`echo "$(BUILD_SRC_DIR)" | sed 's|.|.|g'`; \
+ srcrootstrip=`echo "$(BUILD_SRC_ROOT)" | sed 's|.|.|g'`; \
+ for file in $(DistFiles) ; do \
+ case "$$file" in \
+ $(BUILD_SRC_DIR)/*) \
+ file=`echo "$$file" | sed "s#^$$srcdirstrip/##"` \
+ ;; \
+ $(BUILD_SRC_ROOT)/*) \
+ file=`echo "$$file" | \
+ sed "s#^$$srcrootstrip/##"` \
+ ;; \
+ esac; \
+ if test -f "$(BUILD_SRC_DIR)/$$file" || \
+ test -d "$(BUILD_SRC_DIR)/$$file" ; then \
+ from_dir="$(BUILD_SRC_DIR)" ; \
+ elif test -f "$$file" || test -d "$$file" ; then \
+ from_dir=. ; \
+ fi ; \
+ to_dir=`echo "$$file" | sed -e 's#/[^/]*$$##'` ; \
+ if test "$$to_dir" != "$$file" && test "$$to_dir" != "."; then \
+ to_dir="$(DistDir)/$$dir"; \
+ $(MKDIR) "$$to_dir" ; \
+ else \
+ to_dir="$(DistDir)"; \
+ fi; \
+ mid_dir=`echo "$$file" | sed -n -e 's#^\(.*\)/[^/]*$$#\1#p'`; \
+ if test -n "$$mid_dir" ; then \
+ $(MKDIR) "$$to_dir/$$mid_dir" || exit 1; \
+ fi ; \
+ if test -d "$$from_dir/$$file"; then \
+ if test -d "$(BUILD_SRC_DIR)/$$file" && \
+ test "$$from_dir" != "$(BUILD_SRC_DIR)" ; then \
+ $(CP) -pR "$(BUILD_SRC_DIR)/$$file" "$$to_dir" || exit 1; \
+ fi; \
+ $(CP) -pR $$from_dir/$$file $$to_dir || exit 1; \
+ elif test -f "$$from_dir/$$file" ; then \
+ $(CP) -p "$$from_dir/$$file" "$(DistDir)/$$file" || exit 1; \
+ elif test -L "$$from_dir/$$file" ; then \
+ $(CP) -pd "$$from_dir/$$file" $(DistDir)/$$file || exit 1; \
+ elif echo "$(DistAlways)" | grep -v "$$file" >/dev/null ; then \
+ $(EchoCmd) "===== WARNING: Distribution Source " \
+ "$$from_dir/$$file Not Found!" ; \
+ elif test "$(Verb)" != '@' ; then \
+ $(EchoCmd) "Skipping non-existent $$from_dir/$$file" ; \
+ fi; \
+ done
+ $(Verb) for subdir in $(DistSubDirs) ; do \
+ if test "$$subdir" \!= "." ; then \
+ new_distdir="$(DistDir)/$$subdir" ; \
+ test -d "$$new_distdir" || $(MKDIR) "$$new_distdir" || exit 1; \
+ ( cd $$subdir && $(MAKE) DistDir="$$new_distdir" distdir ) || \
+ exit 1; \
+ fi; \
+ done
+ $(Verb) if test "$(DistDir)" = "$(TopDistDir)" ; then \
+ $(EchoCmd) Eliminating CVS directories from distribution ; \
+ $(RM) -rf `find $(TopDistDir) -type d -name CVS -print` ;\
+ $(MAKE) dist-hook ; \
+ $(FIND) $(TopDistDir) -type d ! -perm -777 -exec chmod a+rwx {} \; \
+ -o ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; \
+ -o ! -type d ! -perm -400 -exec chmod a+r {} \; \
+ -o ! -type d ! -perm -444 -exec \
+ $(SHELL) $(INSTALL_SH) -c -m a+r {} {} \; \
+ || chmod -R a+r $(DistDir) ; \
+ fi
+
+# This is invoked by distdir target, define it as a no-op to avoid errors if not
+# defined by user.
+dist-hook::
+
+endif
###############################################################################
-# MISCELLANEOUS - utility targets
+# TOP LEVEL - targets only to apply at the top level directory
###############################################################################
+ifeq ($(LEVEL),.)
+
+#------------------------------------------------------------------------
+# Install support for the project's include files:
+#------------------------------------------------------------------------
+install-local::
+ $(Echo) Installing include files
+ $(Verb) $(MKDIR) $(includedir)
+ $(Verb) if [ -d "$(BUILD_SRC_ROOT)/include" ] ; then \
+ cd $(BUILD_SRC_ROOT)/include && \
+ find . -path '*/Internal' -prune -o '(' -type f \
+ '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' ')' \
+ -print ')' | grep -v CVS | pax -rwdvpe $(includedir) ; \
+ fi
+
+uninstall-local::
+ $(Echo) Uninstalling include files
+ $(Verb) if [ -d "$(BUILD_SRC_ROOT)/include" ] ; then \
+ cd $(BUILD_SRC_ROOT)/include && \
+ $(RM) -f `find . -path '*/Internal' -prune -o '(' -type f \
+ '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' ')' \
+ -print ')' | grep -v CVS | sed 's#^#$(includedir)/#'` ; \
+ fi
+
+endif
+
#------------------------------------------------------------------------
# Print out the directories used for building
-printvars:
- @$(ECHO) "BUILD_SRC_ROOT: " $(BUILD_SRC_ROOT)
- @$(ECHO) "BUILD_SRC_DIR : " $(BUILD_SRC_DIR)
- @$(ECHO) "BUILD_OBJ_ROOT: " $(BUILD_OBJ_ROOT)
- @$(ECHO) "BUILD_OBJ_DIR : " $(BUILD_OBJ_DIR)
- @$(ECHO) "LLVM_SRC_ROOT : " $(LLVM_SRC_ROOT)
- @$(ECHO) "LLVM_OBJ_ROOT : " $(LLVM_OBJ_ROOT)
- @$(ECHO) "CONFIGURATION : " $(CONFIGURATION)
- @$(ECHO) "OBJDIR: " $(OBJDIR)
- @$(ECHO) "LIBDIR: " $(LIBDIR)
- @$(ECHO) "TOOLDIR: " $(TOOLDIR)
- @$(ECHO) "TDFILES:" '$(TDFILES)'
- @$(ECHO) "CXXCompile: " '$(CXXCompile)'
- @$(ECHO) "CCompile: " '$(CCompile)'
+#------------------------------------------------------------------------
+printvars::
+ $(Echo) "BuildMode : " '$(BuildMode)'
+ $(Echo) "BUILD_SRC_ROOT : " '$(BUILD_SRC_ROOT)'
+ $(Echo) "BUILD_SRC_DIR : " '$(BUILD_SRC_DIR)'
+ $(Echo) "BUILD_OBJ_ROOT : " '$(BUILD_OBJ_ROOT)'
+ $(Echo) "BUILD_OBJ_DIR : " '$(BUILD_OBJ_DIR)'
+ $(Echo) "LLVM_SRC_ROOT : " '$(LLVM_SRC_ROOT)'
+ $(Echo) "LLVM_OBJ_ROOT : " '$(LLVM_OBJ_ROOT)'
+ $(Echo) "libdir : " '$(libdir)'
+ $(Echo) "bindir : " '$(bindir)'
+ $(Echo) "sysconfdir : " '$(sysconfdir)'
+ $(Echo) "UserTargets : " '$(UserTargets)'
+ $(Echo) "ObjMakefiles : " '$(ObjMakefiles)'
+ $(Echo) "SrcMakefiles : " '$(SrcMakefiles)'
+ $(Echo) "ObjDir : " '$(ObjDir)'
+ $(Echo) "LibDir : " '$(LibDir)'
+ $(Echo) "ToolDir : " '$(ToolDir)'
+ $(Echo) "ExmplDir : " '$(ExmplDir)'
+ $(Echo) "Sources : " '$(Sources)'
+ $(Echo) "TDFiles : " '$(TDFiles)'
+ $(Echo) "INCFiles : " '$(INCFiles)'
+ $(Echo) "INCTMPFiles : " '$(INCTMPFiles)'
+ $(Echo) "Compile.CXX : " '$(Compile.CXX)'
+ $(Echo) "Compile.C : " '$(Compile.C)'
+ $(Echo) "Archive : " '$(Archive)'
+ $(Echo) "YaccFiles : " '$(YaccFiles)'
+ $(Echo) "LexFiles : " '$(LexFiles)'
+ $(Echo) "Module : " '$(Module)'
projects / oota-llvm.git / blobdiff