-#===-- Makefile.config - Local configuration for LLVM ------*- makefile -*--====
+#===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===#
+#
+# The LLVM Compiler Infrastructure
+#
+# This file is distributed under the University of Illinois Open Source
+# License. See LICENSE.TXT for details.
+#
+#===------------------------------------------------------------------------===#
#
# This file is included by Makefile.common. It defines paths and other
# values specific to a particular installation of LLVM.
-#===-----------------------------------------------------------------------====
+#
+#===------------------------------------------------------------------------===#
+
+# Define LLVM specific info and directories based on the autoconf variables
+LLVMPackageName := @PACKAGE_NAME@
+LLVMVersion := @PACKAGE_VERSION@
+LLVM_CONFIGTIME := @LLVM_CONFIGTIME@
+###########################################################################
+# Directory Configuration
+# This section of the Makefile determines what is where. To be
+# specific, there are several locations that need to be defined:
+#
+# o LLVM_SRC_ROOT : The root directory of the LLVM source code.
+# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code.
#
-# Target operating system for which LLVM will be compiled.
+# o PROJ_SRC_DIR : The directory containing the code to build.
+# o PROJ_SRC_ROOT : The root directory of the code to build.
#
+# o PROJ_OBJ_DIR : The directory in which compiled code will be placed.
+# o PROJ_OBJ_ROOT : The root directory in which compiled code is placed.
+#
+###########################################################################
+
+PWD := @BINPWD@
+# Set the project name to LLVM if its not defined
+ifndef PROJECT_NAME
+PROJECT_NAME := $(LLVMPackageName)
+endif
+
+PROJ_OBJ_DIR := $(shell $(PWD))
+PROJ_OBJ_ROOT := $(shell cd $(PROJ_OBJ_DIR)/$(LEVEL); $(PWD))
+
+ifeq ($(PROJECT_NAME),llvm)
+LLVM_SRC_ROOT := $(shell cd @abs_top_srcdir@; $(PWD))
+LLVM_OBJ_ROOT := $(shell cd @abs_top_builddir@; $(PWD))
+PROJ_SRC_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(PWD))
+PROJ_SRC_DIR := $(shell cd $(LLVM_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD))
+prefix := @prefix@
+PROJ_prefix := $(prefix)
+PROJ_VERSION := $(LLVMVersion)
+else
+ifndef PROJ_SRC_ROOT
+$(error Projects must define PROJ_SRC_ROOT)
+endif
+ifndef PROJ_OBJ_ROOT
+$(error Projects must define PROJ_OBJ_ROOT)
+endif
+ifndef PROJ_INSTALL_ROOT
+$(error Projects must define PROJ_INSTALL_ROOT)
+endif
+ifndef LLVM_SRC_ROOT
+$(error Projects must define LLVM_SRC_ROOT)
+endif
+ifndef LLVM_OBJ_ROOT
+$(error Projects must define LLVM_OBJ_ROOT)
+endif
+PROJ_SRC_DIR := $(shell cd $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD))
+prefix := $(PROJ_INSTALL_ROOT)
+PROJ_prefix := $(prefix)
+ifndef PROJ_VERSION
+PROJ_VERSION := 1.0
+endif
+endif
+
+LLVMMAKE := $(LLVM_SRC_ROOT)/make
+
+PROJ_bindir := $(PROJ_prefix)/bin
+PROJ_libdir := $(PROJ_prefix)/lib
+PROJ_datadir := $(PROJ_prefix)/share
+PROJ_docsdir := $(PROJ_prefix)/docs/llvm
+PROJ_etcdir := $(PROJ_prefix)/etc/llvm
+PROJ_includedir := $(PROJ_prefix)/include
+PROJ_infodir := $(PROJ_prefix)/info
+PROJ_mandir := $(PROJ_prefix)/share/man
+
+# Determine if we're on a unix type operating system
+LLVM_ON_UNIX:=@LLVM_ON_UNIX@
+LLVM_ON_WIN32:=@LLVM_ON_WIN32@
+
+# Host operating system for which LLVM will be run.
OS=@OS@
+HOST_OS=@HOST_OS@
+# Target operating system for which LLVM will compile for.
+TARGET_OS=@TARGET_OS@
-#
# Target hardware architecture
-#
ARCH=@ARCH@
+# Indicates, whether we're cross-compiling LLVM or not
+LLVM_CROSS_COMPILING=@LLVM_CROSS_COMPILING@
+
+# Executable file extension for build platform (mainly for
+# tablegen call if we're cross-compiling).
+BUILD_EXEEXT=@BUILD_EXEEXT@
+
+# Compilers for the build platflorm (mainly for tablegen
+# call if we're cross-compiling).
+BUILD_CC=@BUILD_CC@
+BUILD_CXX=@BUILD_CXX@
+
+# Triple for configuring build tools when cross-compiling
+BUILD_TRIPLE=@build@
+
+# Target triple (cpu-vendor-os) for which we should generate code
+TARGET_TRIPLE=@target@
+
+# Extra options to compile LLVM with
+EXTRA_OPTIONS=@EXTRA_OPTIONS@
+
+# Endian-ness of the target
+ENDIAN=@ENDIAN@
+
# Path to the C++ compiler to use. This is an optional setting, which defaults
# to whatever your gmake defaults to.
-#
-# Under Linux, for some reason the compiler driver wants to search the PATH to
-# find the system assembler, which breaks if the LLVM assembler is in our path.
-# Hack it to use the assembler in /usr/bin directly.
-#
CXX = @CXX@
-# We have the same problem with the CC binary, which use used by testcases for
-# native builds.
-#
+# Path to the CC binary, which use used by testcases for native builds.
CC := @CC@
-#
-# Compilation flags for the C and C++ compilers.
-#
-
-#
-# Removing the compiler flags for now. They interfere with the test suite
-# (which has its own autoconf stuff), and we don't use -DHAVE_CONFIG_H anyway.
-#
-#CPPFLAGS+=@DEFS@
-#CCFLAGS+=@DEFS@
+# Linker flags.
LDFLAGS+=@LDFLAGS@
-#
-# Removed since it prevents the tests from working properly.
-#
-#LIBS+=@LIBS@
+# Path to the library archiver program.
+AR_PATH = @AR@
+AR = @AR@
-#
-# Libraries needed by tools
-#
-TOOLLINKOPTS=@LIBS@
+# Path to the nm program
+NM_PATH = @NM@
-#
-# Path to the archiver program.
-#
-AR_PATH = @AR@
+# The pathnames of the programs we require to build
+CMP := @CMP@
+CP := @CP@
+DATE := @DATE@
+FIND := @FIND@
+GREP := @GREP@
+INSTALL := @INSTALL@
+MKDIR := $(LLVM_SRC_ROOT)/autoconf/mkinstalldirs
+MV := @MV@
+RANLIB := @RANLIB@
+RM := @RM@
+SED := @SED@
+TAR := @TAR@
-#
-# The pathnames of the Flex and Bison programs, respectively.
-#
-BISON = @YACC@
-FLEX = @LEX@
+# Paths to miscellaneous programs we hope are present but might not be
+PERL := @PERL@
+BZIP2 := @BZIP2@
+CAT := @CAT@
+DOT := @DOT@
+DOXYGEN := @DOXYGEN@
+GROFF := @GROFF@
+GZIP := @GZIP@
+OCAMLC := @OCAMLC@
+OCAMLOPT := @OCAMLOPT@
+OCAMLDEP := @OCAMLDEP@
+OCAMLDOC := @OCAMLDOC@
+GAS := @GAS@
+POD2HTML := @POD2HTML@
+POD2MAN := @POD2MAN@
+PDFROFF := @PDFROFF@
+RUNTEST := @RUNTEST@
+TCLSH := @TCLSH@
+ZIP := @ZIP@
-#
-# Paths to miscellaneous programs.
-#
-SED = @SED@
-RM = @RM@
-ECHO = @ECHO@
-MKDIR = @abs_top_srcdir@/mkinstalldirs
-DATE = @DATE@
-MV = @MV@
-INSTALL = @INSTALL@
-DOT = @DOT@
-ETAGS = @ETAGS@
+HAVE_PERL := @HAVE_PERL@
+HAVE_PTHREAD := @HAVE_PTHREAD@
-#
-# Determine the target for which LLVM should generate code.
-#
-LLVMGCCARCH := @target@/3.4-llvm
+LIBS := @LIBS@
-# Path to directory where object files should be stored during a build.
-# Set OBJ_ROOT to "." if you do not want to use a separate place for
-# object files.
-#
-#OBJ_ROOT = .
-OBJ_ROOT := @OBJROOT@
+# Targets that we should build
+TARGETS_TO_BUILD=@TARGETS_TO_BUILD@
-# Path to location for LLVM front-end this should only be specified here if you
-# want to override the value set in Makefile.$(uname)
-#
+# Path to location for LLVM C/C++ front-end. You can modify this if you
+# want to override the value set by configure.
LLVMGCCDIR := @LLVMGCCDIR@
-# When this setting is set to true, programs in the llvm/test/Programs hierarchy
-# are not recompiled from source code. Instead, the bytecode for the file is
-# pulled from the BYTECODE_REPOSITORY directory. This can be useful when disk
-# space is limited or when you just don't want to spend time running the C
-# frontend.
-#
-#USE_PRECOMPILED_BYTECODE := 1
-@UPB@
+# Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries:
+LLVMGCC := @LLVMGCC@
+LLVMGXX := @LLVMGXX@
+LLVMCC1 := @LLVMCC1@
+LLVMCC1PLUS := @LLVMCC1PLUS@
+LLVMGCC_LANGS := @LLVMGCC_LANGS@
-# This path specifies the cannonical location of bytecode files for compiled
-# versions of the test/Programs/* programs. This is used as the bytecode source
-# when USE_PRECOMPILED_BYTECODE is specified or when source code is not
-# available for the program (such as SPEC).
-#
-BYTECODE_REPOSITORY := @BCR@
+# Information on Clang, if configured.
+CLANGPATH := @CLANGPATH@
+CLANGXXPATH := @CLANGXXPATH@
+ENABLE_BUILT_CLANG := @ENABLE_BUILT_CLANG@
-# Path to location for purify, this is only needed if you build with
-# ENABLE_PURIFY=1
-#
-PURIFY = @PURIFY@
+# The LLVM capable compiler to use.
+LLVMCC_OPTION := @LLVMCC_OPTION@
-#
-# SPEC benchmarks:
-# Set the USE_SPEC variable to enable the use of the SPEC benchmarks.
-# You must provide the SPEC benchmarks on your own.
-#
-@USE_SPEC@
+# Path to directory where object files should be stored during a build.
+# Set OBJ_ROOT to "." if you do not want to use a separate place for
+# object files.
+OBJ_ROOT := .
-#
-# Path to the SPEC benchmarks. If you have the SPEC benchmarks, place the
-# path here.
-#
-#SPEC_ROOT := /home/vadve/shared/benchmarks/speccpu2000/benchspec
-SPEC_ROOT := @SPEC_ROOT@
+# What to pass as rpath flag to g++
+RPATH := @RPATH@
-#
-# Path to the PAPI code. This is used by the reoptimizer only.
-#
-#PAPIDIR := /home/vadve/shared/papi-2.3.4.1
-PAPIDIR := @PAPIDIR@
+# What to pass as -rdynamic flag to g++
+RDYNAMIC := @RDYNAMIC@
# These are options that can either be enabled here, or can be enabled on the
-# make command line (ie, make ENABLE_PROFILING=1)
-#
+# make command line (ie, make ENABLE_PROFILING=1):
-# When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are
-# turned on, and Debug builds are turned off.
-#
+# When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put
+# into the "Release" directories. Otherwise, LLVM code is not optimized and
+# output is put in the "Debug" directories.
#ENABLE_OPTIMIZED = 1
@ENABLE_OPTIMIZED@
+# When ENABLE_PROFILING is enabled, profile instrumentation is done
+# and output is put into the "<Flavor>+Profile" directories, where
+# <Flavor> is either Debug or Release depending on how other builkd
+# flags are set.. Otherwise, output is put in the <Flavor>
+# directories.
+#ENABLE_PROFILING = 1
+@ENABLE_PROFILING@
+
+# When DISABLE_ASSERTIONS is enabled, builds of all of the LLVM code will
+# exclude assertion checks, otherwise they are included.
+#DISABLE_ASSERTIONS = 1
+@DISABLE_ASSERTIONS@
+
+# When ENABLE_EXPENSIVE_CHECKS is enabled, builds of all of the LLVM
+# code will include expensive checks, otherwise they are excluded.
+#ENABLE_EXPENSIVE_CHECKS = 0
+@ENABLE_EXPENSIVE_CHECKS@
+
+# When DEBUG_RUNTIME is enabled, the runtime libraries will retain debug
+# symbols.
+#DEBUG_RUNTIME = 1
+@DEBUG_RUNTIME@
+
+# When DEBUG_SYMBOLS is enabled, the compiler libraries will retain debug
+# symbols.
+#DEBUG_SYMBOLS = 1
+@DEBUG_SYMBOLS@
+
+# The compiler flags to use for optimized builds.
+OPTIMIZE_OPTION := @OPTIMIZE_OPTION@
+
# When ENABLE_PROFILING is enabled, the llvm source base is built with profile
# information to allow gprof to be used to get execution frequencies.
-#
#ENABLE_PROFILING = 1
-#
+# When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built
+ENABLE_DOXYGEN = @ENABLE_DOXYGEN@
+
+# Do we want to enable threads?
+ENABLE_THREADS := @ENABLE_THREADS@
+
+# Do we want to build with position independent code?
+ENABLE_PIC := @ENABLE_PIC@
+
+# Do we want to build a shared library and link the tools with it?
+ENABLE_SHARED := @ENABLE_SHARED@
+
+# Use -fvisibility-inlines-hidden?
+ENABLE_VISIBILITY_INLINES_HIDDEN := @ENABLE_VISIBILITY_INLINES_HIDDEN@
+
+# Do we want to allow timestamping information into builds?
+ENABLE_TIMESTAMPS := @ENABLE_TIMESTAMPS@
+
# This option tells the Makefiles to produce verbose output.
# It essentially prints the commands that make is executing
-#
#VERBOSE = 1
-# When ENABLE_PURIFY is set to 1, the LLVM tools are linked with purify (which
-# must be locally installed) to allow for some automated memory error debugging.
-#
-#ENABLE_PURIFY = 1
-@ENABLE_PURIFY@
-
-#
# Enable JIT for this platform
-#
-@JIT@
+TARGET_HAS_JIT = @TARGET_HAS_JIT@
-#
-# Disable LLC diffs for testing.
-#
-@DISABLE_LLC_DIFFS@
+# Environment variable to set to change the runtime shared library search path.
+SHLIBPATH_VAR = @SHLIBPATH_VAR@
+
+# Shared library extension for host platform.
+SHLIBEXT = @SHLIBEXT@
+
+# Executable file extension for host platform.
+EXEEXT = @EXEEXT@
+
+# Things we just assume are "there"
+ECHO := echo
+
+# Get the options for causing archives to link all their content instead of
+# just missing symbols, and the inverse of that. This is used for certain LLVM
+# tools that permit loadable modules. It ensures that the LLVM symbols will be
+# available to those loadable modules.
+LINKALL := @LINKALL@
+NOLINKALL := @NOLINKALL@
+
+# Get the value of HUGE_VAL_SANITY which will be either "yes" or "no" depending
+# on the check.
+HUGE_VAL_SANITY = @HUGE_VAL_SANITY@
+
+# Bindings that we should build
+BINDINGS_TO_BUILD := @BINDINGS_TO_BUILD@
+ALL_BINDINGS := @ALL_BINDINGS@
+OCAML_LIBDIR := @OCAML_LIBDIR@
+
+# When compiling under Mingw/Cygwin, executables such as tblgen
+# expect Windows paths, whereas the build system uses Unix paths.
+# The function SYSPATH transforms Unix paths into Windows paths.
+ifneq (,$(findstring -mno-cygwin, $(CXX)))
+ SYSPATH = $(shell echo $(1) | cygpath -m -f -)
+else
+ SYSPATH = $(1)
+endif
+
+# Location of the plugin header file for gold.
+BINUTILS_INCDIR := @BINUTILS_INCDIR@
+
+# When ENABLE_LLVMC_DYNAMIC is enabled, LLVMC will link libCompilerDriver
+# dynamically. This is needed to make dynamic plugins work on some targets
+# (Windows).
+ENABLE_LLVMC_DYNAMIC = 0
+#@ENABLE_LLVMC_DYNAMIC@
+
+# When ENABLE_LLVMC_DYNAMIC_PLUGINS is enabled, LLVMC will have dynamic plugin
+# support (via the -load option).
+ENABLE_LLVMC_DYNAMIC_PLUGINS = 1
+#@ENABLE_LLVMC_DYNAMIC_PLUGINS@
+
+# Optional flags supported by the compiler
+# -Wno-missing-field-initializers
+NO_MISSING_FIELD_INITIALIZERS = @NO_MISSING_FIELD_INITIALIZERS@
+# -Wno-variadic-macros
+NO_VARIADIC_MACROS = @NO_VARIADIC_MACROS@
+# Flags supported by the linker.
+# bfd ld / gold --version-script=file
+HAVE_LINK_VERSION_SCRIPT = @HAVE_LINK_VERSION_SCRIPT@