1 //===- InlineFunction.cpp - Code to perform function inlining -------------===//
3 // The LLVM Compiler Infrastructure
5 // This file is distributed under the University of Illinois Open Source
6 // License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
10 // This file implements inlining of a function into a call site, resolving
11 // parameters and the return value as appropriate.
13 // The code in this file for handling inlines through invoke
14 // instructions preserves semantics only under some assumptions about
15 // the behavior of unwinders which correspond to gcc-style libUnwind
16 // exception personality functions. Eventually the IR will be
17 // improved to make this unnecessary, but until then, this code is
18 // marked [LIBUNWIND].
20 //===----------------------------------------------------------------------===//
22 #include "llvm/Transforms/Utils/Cloning.h"
23 #include "llvm/Constants.h"
24 #include "llvm/DerivedTypes.h"
25 #include "llvm/Module.h"
26 #include "llvm/Instructions.h"
27 #include "llvm/IntrinsicInst.h"
28 #include "llvm/Intrinsics.h"
29 #include "llvm/Attributes.h"
30 #include "llvm/Analysis/CallGraph.h"
31 #include "llvm/Analysis/DebugInfo.h"
32 #include "llvm/Analysis/InstructionSimplify.h"
33 #include "llvm/Target/TargetData.h"
34 #include "llvm/Transforms/Utils/Local.h"
35 #include "llvm/ADT/SmallVector.h"
36 #include "llvm/ADT/StringExtras.h"
37 #include "llvm/Support/CallSite.h"
38 #include "llvm/Support/IRBuilder.h"
41 bool llvm::InlineFunction(CallInst *CI, InlineFunctionInfo &IFI) {
42 return InlineFunction(CallSite(CI), IFI);
44 bool llvm::InlineFunction(InvokeInst *II, InlineFunctionInfo &IFI) {
45 return InlineFunction(CallSite(II), IFI);
48 // FIXME: New EH - Remove the functions marked [LIBUNWIND] when new EH is
51 /// [LIBUNWIND] Look for an llvm.eh.exception call in the given block.
52 static EHExceptionInst *findExceptionInBlock(BasicBlock *bb) {
53 for (BasicBlock::iterator i = bb->begin(), e = bb->end(); i != e; i++) {
54 EHExceptionInst *exn = dyn_cast<EHExceptionInst>(i);
61 /// [LIBUNWIND] Look for the 'best' llvm.eh.selector instruction for
62 /// the given llvm.eh.exception call.
63 static EHSelectorInst *findSelectorForException(EHExceptionInst *exn) {
64 BasicBlock *exnBlock = exn->getParent();
66 EHSelectorInst *outOfBlockSelector = 0;
67 for (Instruction::use_iterator
68 ui = exn->use_begin(), ue = exn->use_end(); ui != ue; ++ui) {
69 EHSelectorInst *sel = dyn_cast<EHSelectorInst>(*ui);
72 // Immediately accept an eh.selector in the same block as the
74 if (sel->getParent() == exnBlock) return sel;
76 // Otherwise, use the first selector we see.
77 if (!outOfBlockSelector) outOfBlockSelector = sel;
80 return outOfBlockSelector;
83 /// [LIBUNWIND] Find the (possibly absent) call to @llvm.eh.selector
84 /// in the given landing pad. In principle, llvm.eh.exception is
85 /// required to be in the landing pad; in practice, SplitCriticalEdge
86 /// can break that invariant, and then inlining can break it further.
87 /// There's a real need for a reliable solution here, but until that
88 /// happens, we have some fragile workarounds here.
89 static EHSelectorInst *findSelectorForLandingPad(BasicBlock *lpad) {
90 // Look for an exception call in the actual landing pad.
91 EHExceptionInst *exn = findExceptionInBlock(lpad);
92 if (exn) return findSelectorForException(exn);
94 // Okay, if that failed, look for one in an obvious successor. If
95 // we find one, we'll fix the IR by moving things back to the
98 bool dominates = true; // does the lpad dominate the exn call
99 BasicBlock *nonDominated = 0; // if not, the first non-dominated block
100 BasicBlock *lastDominated = 0; // and the block which branched to it
102 BasicBlock *exnBlock = lpad;
104 // We need to protect against lpads that lead into infinite loops.
105 SmallPtrSet<BasicBlock*,4> visited;
106 visited.insert(exnBlock);
109 // We're not going to apply this hack to anything more complicated
110 // than a series of unconditional branches, so if the block
111 // doesn't terminate in an unconditional branch, just fail. More
112 // complicated cases can arise when, say, sinking a call into a
113 // split unwind edge and then inlining it; but that can do almost
114 // *anything* to the CFG, including leaving the selector
115 // completely unreachable. The only way to fix that properly is
116 // to (1) prohibit transforms which move the exception or selector
117 // values away from the landing pad, e.g. by producing them with
118 // instructions that are pinned to an edge like a phi, or
119 // producing them with not-really-instructions, and (2) making
120 // transforms which split edges deal with that.
121 BranchInst *branch = dyn_cast<BranchInst>(&exnBlock->back());
122 if (!branch || branch->isConditional()) return 0;
124 BasicBlock *successor = branch->getSuccessor(0);
126 // Fail if we found an infinite loop.
127 if (!visited.insert(successor)) return 0;
129 // If the successor isn't dominated by exnBlock:
130 if (!successor->getSinglePredecessor()) {
131 // We don't want to have to deal with threading the exception
132 // through multiple levels of phi, so give up if we've already
133 // followed a non-dominating edge.
134 if (!dominates) return 0;
136 // Otherwise, remember this as a non-dominating edge.
138 nonDominated = successor;
139 lastDominated = exnBlock;
142 exnBlock = successor;
145 exn = findExceptionInBlock(exnBlock);
148 // Look for a selector call for the exception we found.
149 EHSelectorInst *selector = findSelectorForException(exn);
150 if (!selector) return 0;
152 // The easy case is when the landing pad still dominates the
153 // exception call, in which case we can just move both calls back to
156 selector->moveBefore(lpad->getFirstNonPHI());
157 exn->moveBefore(selector);
161 // Otherwise, we have to split at the first non-dominating block.
162 // The CFG looks basically like this:
165 // insnsAndBranches_1
166 // br label %nonDominated
170 // %exn = call i8* @llvm.eh.exception()
171 // insnsAndBranches_4
172 // %selector = call @llvm.eh.selector(i8* %exn, ...
173 // We need to turn this into:
176 // %exn0 = call i8* @llvm.eh.exception()
177 // %selector0 = call @llvm.eh.selector(i8* %exn0, ...
178 // insnsAndBranches_1
179 // br label %split // from lastDominated
181 // phis_2 (without edge from lastDominated)
182 // %exn1 = call i8* @llvm.eh.exception()
183 // %selector1 = call i8* @llvm.eh.selector(i8* %exn1, ...
186 // phis_2 (edge from lastDominated, edge from split)
188 // %selector = phi ...
190 // insnsAndBranches_4
192 assert(nonDominated);
193 assert(lastDominated);
195 // First, make clones of the intrinsics to go in lpad.
196 EHExceptionInst *lpadExn = cast<EHExceptionInst>(exn->clone());
197 EHSelectorInst *lpadSelector = cast<EHSelectorInst>(selector->clone());
198 lpadSelector->setArgOperand(0, lpadExn);
199 lpadSelector->insertBefore(lpad->getFirstNonPHI());
200 lpadExn->insertBefore(lpadSelector);
202 // Split the non-dominated block.
204 nonDominated->splitBasicBlock(nonDominated->getFirstNonPHI(),
205 nonDominated->getName() + ".lpad-fix");
207 // Redirect the last dominated branch there.
208 cast<BranchInst>(lastDominated->back()).setSuccessor(0, split);
210 // Move the existing intrinsics to the end of the old block.
211 selector->moveBefore(&nonDominated->back());
212 exn->moveBefore(selector);
214 Instruction *splitIP = &split->front();
216 // For all the phis in nonDominated, make a new phi in split to join
217 // that phi with the edge from lastDominated.
218 for (BasicBlock::iterator
219 i = nonDominated->begin(), e = nonDominated->end(); i != e; ++i) {
220 PHINode *phi = dyn_cast<PHINode>(i);
223 PHINode *splitPhi = PHINode::Create(phi->getType(), 2, phi->getName(),
225 phi->replaceAllUsesWith(splitPhi);
226 splitPhi->addIncoming(phi, nonDominated);
227 splitPhi->addIncoming(phi->removeIncomingValue(lastDominated),
231 // Make new phis for the exception and selector.
232 PHINode *exnPhi = PHINode::Create(exn->getType(), 2, "", splitIP);
233 exn->replaceAllUsesWith(exnPhi);
234 selector->setArgOperand(0, exn); // except for this use
235 exnPhi->addIncoming(exn, nonDominated);
236 exnPhi->addIncoming(lpadExn, lastDominated);
238 PHINode *selectorPhi = PHINode::Create(selector->getType(), 2, "", splitIP);
239 selector->replaceAllUsesWith(selectorPhi);
240 selectorPhi->addIncoming(selector, nonDominated);
241 selectorPhi->addIncoming(lpadSelector, lastDominated);
247 /// A class for recording information about inlining through an invoke.
248 class InvokeInliningInfo {
249 BasicBlock *OuterUnwindDest;
250 EHSelectorInst *OuterSelector;
251 BasicBlock *InnerUnwindDest;
252 PHINode *InnerExceptionPHI;
253 PHINode *InnerSelectorPHI;
254 SmallVector<Value*, 8> UnwindDestPHIValues;
256 // FIXME: New EH - These will replace the analogous ones above.
257 BasicBlock *OuterResumeDest; //< Destination of the invoke's unwind.
258 BasicBlock *InnerResumeDest; //< Destination for the callee's resume.
259 LandingPadInst *CallerLPad; //< LandingPadInst associated with the invoke.
260 PHINode *InnerEHValuesPHI; //< PHI for EH values from landingpad insts.
263 InvokeInliningInfo(InvokeInst *II)
264 : OuterUnwindDest(II->getUnwindDest()), OuterSelector(0),
265 InnerUnwindDest(0), InnerExceptionPHI(0), InnerSelectorPHI(0),
266 OuterResumeDest(II->getUnwindDest()), InnerResumeDest(0),
267 CallerLPad(0), InnerEHValuesPHI(0) {
268 // If there are PHI nodes in the unwind destination block, we need to keep
269 // track of which values came into them from the invoke before removing
270 // the edge from this block.
271 llvm::BasicBlock *InvokeBB = II->getParent();
272 BasicBlock::iterator I = OuterUnwindDest->begin();
273 for (; isa<PHINode>(I); ++I) {
274 // Save the value to use for this edge.
275 PHINode *PHI = cast<PHINode>(I);
276 UnwindDestPHIValues.push_back(PHI->getIncomingValueForBlock(InvokeBB));
279 CallerLPad = cast<LandingPadInst>(I);
282 /// The outer unwind destination is the target of unwind edges
283 /// introduced for calls within the inlined function.
284 BasicBlock *getOuterUnwindDest() const {
285 return OuterUnwindDest;
288 EHSelectorInst *getOuterSelector() {
290 OuterSelector = findSelectorForLandingPad(OuterUnwindDest);
291 return OuterSelector;
294 BasicBlock *getInnerUnwindDest();
296 // FIXME: New EH - Rename when new EH is turned on.
297 BasicBlock *getInnerUnwindDestNewEH();
299 LandingPadInst *getLandingPadInst() const { return CallerLPad; }
301 bool forwardEHResume(CallInst *call, BasicBlock *src);
303 /// forwardResume - Forward the 'resume' instruction to the caller's landing
304 /// pad block. When the landing pad block has only one predecessor, this is
305 /// a simple branch. When there is more than one predecessor, we need to
306 /// split the landing pad block after the landingpad instruction and jump
308 void forwardResume(ResumeInst *RI);
310 /// addIncomingPHIValuesFor - Add incoming-PHI values to the unwind
311 /// destination block for the given basic block, using the values for the
312 /// original invoke's source block.
313 void addIncomingPHIValuesFor(BasicBlock *BB) const {
314 addIncomingPHIValuesForInto(BB, OuterUnwindDest);
317 void addIncomingPHIValuesForInto(BasicBlock *src, BasicBlock *dest) const {
318 BasicBlock::iterator I = dest->begin();
319 for (unsigned i = 0, e = UnwindDestPHIValues.size(); i != e; ++i, ++I) {
320 PHINode *phi = cast<PHINode>(I);
321 phi->addIncoming(UnwindDestPHIValues[i], src);
327 /// [LIBUNWIND] Get or create a target for the branch out of rewritten calls to
329 BasicBlock *InvokeInliningInfo::getInnerUnwindDest() {
330 if (InnerUnwindDest) return InnerUnwindDest;
332 // Find and hoist the llvm.eh.exception and llvm.eh.selector calls
333 // in the outer landing pad to immediately following the phis.
334 EHSelectorInst *selector = getOuterSelector();
335 if (!selector) return 0;
337 // The call to llvm.eh.exception *must* be in the landing pad.
338 Instruction *exn = cast<Instruction>(selector->getArgOperand(0));
339 assert(exn->getParent() == OuterUnwindDest);
341 // TODO: recognize when we've already done this, so that we don't
342 // get a linear number of these when inlining calls into lots of
343 // invokes with the same landing pad.
346 Instruction *splitPoint = exn->getParent()->getFirstNonPHI();
347 assert(splitPoint != selector && "selector-on-exception dominance broken!");
348 if (splitPoint == exn) {
349 selector->removeFromParent();
350 selector->insertAfter(exn);
351 splitPoint = selector->getNextNode();
353 exn->moveBefore(splitPoint);
354 selector->moveBefore(splitPoint);
357 // Split the landing pad.
358 InnerUnwindDest = OuterUnwindDest->splitBasicBlock(splitPoint,
359 OuterUnwindDest->getName() + ".body");
361 // The number of incoming edges we expect to the inner landing pad.
362 const unsigned phiCapacity = 2;
364 // Create corresponding new phis for all the phis in the outer landing pad.
365 BasicBlock::iterator insertPoint = InnerUnwindDest->begin();
366 BasicBlock::iterator I = OuterUnwindDest->begin();
367 for (unsigned i = 0, e = UnwindDestPHIValues.size(); i != e; ++i, ++I) {
368 PHINode *outerPhi = cast<PHINode>(I);
369 PHINode *innerPhi = PHINode::Create(outerPhi->getType(), phiCapacity,
370 outerPhi->getName() + ".lpad-body",
372 outerPhi->replaceAllUsesWith(innerPhi);
373 innerPhi->addIncoming(outerPhi, OuterUnwindDest);
376 // Create a phi for the exception value...
377 InnerExceptionPHI = PHINode::Create(exn->getType(), phiCapacity,
378 "exn.lpad-body", insertPoint);
379 exn->replaceAllUsesWith(InnerExceptionPHI);
380 selector->setArgOperand(0, exn); // restore this use
381 InnerExceptionPHI->addIncoming(exn, OuterUnwindDest);
383 // ...and the selector.
384 InnerSelectorPHI = PHINode::Create(selector->getType(), phiCapacity,
385 "selector.lpad-body", insertPoint);
386 selector->replaceAllUsesWith(InnerSelectorPHI);
387 InnerSelectorPHI->addIncoming(selector, OuterUnwindDest);
390 return InnerUnwindDest;
393 /// [LIBUNWIND] Try to forward the given call, which logically occurs
394 /// at the end of the given block, as a branch to the inner unwind
395 /// block. Returns true if the call was forwarded.
396 bool InvokeInliningInfo::forwardEHResume(CallInst *call, BasicBlock *src) {
397 // First, check whether this is a call to the intrinsic.
398 Function *fn = dyn_cast<Function>(call->getCalledValue());
399 if (!fn || fn->getName() != "llvm.eh.resume")
402 // At this point, we need to return true on all paths, because
403 // otherwise we'll construct an invoke of the intrinsic, which is
406 // Try to find or make an inner unwind dest, which will fail if we
407 // can't find a selector call for the outer unwind dest.
408 BasicBlock *dest = getInnerUnwindDest();
409 bool hasSelector = (dest != 0);
411 // If we failed, just use the outer unwind dest, dropping the
412 // exception and selector on the floor.
414 dest = OuterUnwindDest;
417 BranchInst::Create(dest, src);
419 // Update the phis in the destination. They were inserted in an
420 // order which makes this work.
421 addIncomingPHIValuesForInto(src, dest);
424 InnerExceptionPHI->addIncoming(call->getArgOperand(0), src);
425 InnerSelectorPHI->addIncoming(call->getArgOperand(1), src);
431 /// Get or create a target for the branch from ResumeInsts.
432 BasicBlock *InvokeInliningInfo::getInnerUnwindDestNewEH() {
433 // FIXME: New EH - rename this function when new EH is turned on.
434 if (InnerResumeDest) return InnerResumeDest;
436 // Split the landing pad.
437 BasicBlock::iterator SplitPoint = CallerLPad; ++SplitPoint;
439 OuterResumeDest->splitBasicBlock(SplitPoint,
440 OuterResumeDest->getName() + ".body");
442 // The number of incoming edges we expect to the inner landing pad.
443 const unsigned PHICapacity = 2;
445 // Create corresponding new PHIs for all the PHIs in the outer landing pad.
446 BasicBlock::iterator InsertPoint = InnerResumeDest->begin();
447 BasicBlock::iterator I = OuterResumeDest->begin();
448 for (unsigned i = 0, e = UnwindDestPHIValues.size(); i != e; ++i, ++I) {
449 PHINode *OuterPHI = cast<PHINode>(I);
450 PHINode *InnerPHI = PHINode::Create(OuterPHI->getType(), PHICapacity,
451 OuterPHI->getName() + ".lpad-body",
453 OuterPHI->replaceAllUsesWith(InnerPHI);
454 InnerPHI->addIncoming(OuterPHI, OuterResumeDest);
457 // Create a PHI for the exception values.
458 InnerEHValuesPHI = PHINode::Create(CallerLPad->getType(), PHICapacity,
459 "eh.lpad-body", InsertPoint);
460 CallerLPad->replaceAllUsesWith(InnerEHValuesPHI);
461 InnerEHValuesPHI->addIncoming(CallerLPad, OuterResumeDest);
464 return InnerResumeDest;
467 /// forwardResume - Forward the 'resume' instruction to the caller's landing pad
468 /// block. When the landing pad block has only one predecessor, this is a simple
469 /// branch. When there is more than one predecessor, we need to split the
470 /// landing pad block after the landingpad instruction and jump to there.
471 void InvokeInliningInfo::forwardResume(ResumeInst *RI) {
472 BasicBlock *Dest = getInnerUnwindDestNewEH();
473 BasicBlock *Src = RI->getParent();
475 BranchInst::Create(Dest, Src);
477 // Update the PHIs in the destination. They were inserted in an order which
479 addIncomingPHIValuesForInto(Src, Dest);
481 InnerEHValuesPHI->addIncoming(RI->getOperand(0), Src);
482 RI->eraseFromParent();
486 /// HandleCallsInBlockInlinedThroughInvoke - When we inline a basic block into
487 /// an invoke, we have to turn all of the calls that can throw into
488 /// invokes. This function analyze BB to see if there are any calls, and if so,
489 /// it rewrites them to be invokes that jump to InvokeDest and fills in the PHI
490 /// nodes in that block with the values specified in InvokeDestPHIValues.
492 /// Returns true to indicate that the next block should be skipped.
493 static bool HandleCallsInBlockInlinedThroughInvoke(BasicBlock *BB,
494 InvokeInliningInfo &Invoke) {
495 LandingPadInst *LPI = Invoke.getLandingPadInst();
497 for (BasicBlock::iterator BBI = BB->begin(), E = BB->end(); BBI != E; ) {
498 Instruction *I = BBI++;
500 if (LandingPadInst *L = dyn_cast<LandingPadInst>(I)) {
501 unsigned NumClauses = LPI->getNumClauses();
502 L->reserveClauses(NumClauses);
503 for (unsigned i = 0; i != NumClauses; ++i)
504 L->addClause(LPI->getClause(i));
507 // We only need to check for function calls: inlined invoke
508 // instructions require no special handling.
509 CallInst *CI = dyn_cast<CallInst>(I);
511 // If this call cannot unwind, don't convert it to an invoke.
512 if (!CI || CI->doesNotThrow())
515 // Convert this function call into an invoke instruction. First, split the
517 BasicBlock *Split = BB->splitBasicBlock(CI, CI->getName()+".noexc");
519 // Delete the unconditional branch inserted by splitBasicBlock
520 BB->getInstList().pop_back();
522 // Otherwise, create the new invoke instruction.
523 ImmutableCallSite CS(CI);
524 SmallVector<Value*, 8> InvokeArgs(CS.arg_begin(), CS.arg_end());
525 InvokeInst *II = InvokeInst::Create(CI->getCalledValue(), Split,
526 Invoke.getOuterUnwindDest(),
527 InvokeArgs, CI->getName(), BB);
528 II->setCallingConv(CI->getCallingConv());
529 II->setAttributes(CI->getAttributes());
531 // Make sure that anything using the call now uses the invoke! This also
532 // updates the CallGraph if present, because it uses a WeakVH.
533 CI->replaceAllUsesWith(II);
535 // Delete the original call
536 Split->getInstList().pop_front();
538 // Update any PHI nodes in the exceptional block to indicate that there is
539 // now a new entry in them.
540 Invoke.addIncomingPHIValuesFor(BB);
547 /// HandleInlinedInvoke - If we inlined an invoke site, we need to convert calls
548 /// in the body of the inlined function into invokes and turn unwind
549 /// instructions into branches to the invoke unwind dest.
551 /// II is the invoke instruction being inlined. FirstNewBlock is the first
552 /// block of the inlined code (the last block is the end of the function),
553 /// and InlineCodeInfo is information about the code that got inlined.
554 static void HandleInlinedInvoke(InvokeInst *II, BasicBlock *FirstNewBlock,
555 ClonedCodeInfo &InlinedCodeInfo) {
556 BasicBlock *InvokeDest = II->getUnwindDest();
558 Function *Caller = FirstNewBlock->getParent();
560 // The inlined code is currently at the end of the function, scan from the
561 // start of the inlined code to its end, checking for stuff we need to
562 // rewrite. If the code doesn't have calls or unwinds, we know there is
563 // nothing to rewrite.
564 if (!InlinedCodeInfo.ContainsCalls && !InlinedCodeInfo.ContainsUnwinds) {
565 // Now that everything is happy, we have one final detail. The PHI nodes in
566 // the exception destination block still have entries due to the original
567 // invoke instruction. Eliminate these entries (which might even delete the
569 InvokeDest->removePredecessor(II->getParent());
573 InvokeInliningInfo Invoke(II);
575 for (Function::iterator BB = FirstNewBlock, E = Caller->end(); BB != E; ++BB){
576 if (InlinedCodeInfo.ContainsCalls)
577 if (HandleCallsInBlockInlinedThroughInvoke(BB, Invoke)) {
578 // Honor a request to skip the next block. We don't need to
579 // consider UnwindInsts in this case either.
584 if (UnwindInst *UI = dyn_cast<UnwindInst>(BB->getTerminator())) {
585 // An UnwindInst requires special handling when it gets inlined into an
586 // invoke site. Once this happens, we know that the unwind would cause
587 // a control transfer to the invoke exception destination, so we can
588 // transform it into a direct branch to the exception destination.
589 BranchInst::Create(InvokeDest, UI);
591 // Delete the unwind instruction!
592 UI->eraseFromParent();
594 // Update any PHI nodes in the exceptional block to indicate that
595 // there is now a new entry in them.
596 Invoke.addIncomingPHIValuesFor(BB);
599 if (ResumeInst *RI = dyn_cast<ResumeInst>(BB->getTerminator())) {
600 Invoke.forwardResume(RI);
604 // Now that everything is happy, we have one final detail. The PHI nodes in
605 // the exception destination block still have entries due to the original
606 // invoke instruction. Eliminate these entries (which might even delete the
608 InvokeDest->removePredecessor(II->getParent());
611 /// UpdateCallGraphAfterInlining - Once we have cloned code over from a callee
612 /// into the caller, update the specified callgraph to reflect the changes we
613 /// made. Note that it's possible that not all code was copied over, so only
614 /// some edges of the callgraph may remain.
615 static void UpdateCallGraphAfterInlining(CallSite CS,
616 Function::iterator FirstNewBlock,
617 ValueToValueMapTy &VMap,
618 InlineFunctionInfo &IFI) {
619 CallGraph &CG = *IFI.CG;
620 const Function *Caller = CS.getInstruction()->getParent()->getParent();
621 const Function *Callee = CS.getCalledFunction();
622 CallGraphNode *CalleeNode = CG[Callee];
623 CallGraphNode *CallerNode = CG[Caller];
625 // Since we inlined some uninlined call sites in the callee into the caller,
626 // add edges from the caller to all of the callees of the callee.
627 CallGraphNode::iterator I = CalleeNode->begin(), E = CalleeNode->end();
629 // Consider the case where CalleeNode == CallerNode.
630 CallGraphNode::CalledFunctionsVector CallCache;
631 if (CalleeNode == CallerNode) {
632 CallCache.assign(I, E);
633 I = CallCache.begin();
637 for (; I != E; ++I) {
638 const Value *OrigCall = I->first;
640 ValueToValueMapTy::iterator VMI = VMap.find(OrigCall);
641 // Only copy the edge if the call was inlined!
642 if (VMI == VMap.end() || VMI->second == 0)
645 // If the call was inlined, but then constant folded, there is no edge to
646 // add. Check for this case.
647 Instruction *NewCall = dyn_cast<Instruction>(VMI->second);
648 if (NewCall == 0) continue;
650 // Remember that this call site got inlined for the client of
652 IFI.InlinedCalls.push_back(NewCall);
654 // It's possible that inlining the callsite will cause it to go from an
655 // indirect to a direct call by resolving a function pointer. If this
656 // happens, set the callee of the new call site to a more precise
657 // destination. This can also happen if the call graph node of the caller
658 // was just unnecessarily imprecise.
659 if (I->second->getFunction() == 0)
660 if (Function *F = CallSite(NewCall).getCalledFunction()) {
661 // Indirect call site resolved to direct call.
662 CallerNode->addCalledFunction(CallSite(NewCall), CG[F]);
667 CallerNode->addCalledFunction(CallSite(NewCall), I->second);
670 // Update the call graph by deleting the edge from Callee to Caller. We must
671 // do this after the loop above in case Caller and Callee are the same.
672 CallerNode->removeCallEdgeFor(CS);
675 /// HandleByValArgument - When inlining a call site that has a byval argument,
676 /// we have to make the implicit memcpy explicit by adding it.
677 static Value *HandleByValArgument(Value *Arg, Instruction *TheCall,
678 const Function *CalledFunc,
679 InlineFunctionInfo &IFI,
680 unsigned ByValAlignment) {
681 Type *AggTy = cast<PointerType>(Arg->getType())->getElementType();
683 // If the called function is readonly, then it could not mutate the caller's
684 // copy of the byval'd memory. In this case, it is safe to elide the copy and
686 if (CalledFunc->onlyReadsMemory()) {
687 // If the byval argument has a specified alignment that is greater than the
688 // passed in pointer, then we either have to round up the input pointer or
689 // give up on this transformation.
690 if (ByValAlignment <= 1) // 0 = unspecified, 1 = no particular alignment.
693 // If the pointer is already known to be sufficiently aligned, or if we can
694 // round it up to a larger alignment, then we don't need a temporary.
695 if (getOrEnforceKnownAlignment(Arg, ByValAlignment,
696 IFI.TD) >= ByValAlignment)
699 // Otherwise, we have to make a memcpy to get a safe alignment. This is bad
700 // for code quality, but rarely happens and is required for correctness.
703 LLVMContext &Context = Arg->getContext();
705 Type *VoidPtrTy = Type::getInt8PtrTy(Context);
707 // Create the alloca. If we have TargetData, use nice alignment.
710 Align = IFI.TD->getPrefTypeAlignment(AggTy);
712 // If the byval had an alignment specified, we *must* use at least that
713 // alignment, as it is required by the byval argument (and uses of the
714 // pointer inside the callee).
715 Align = std::max(Align, ByValAlignment);
717 Function *Caller = TheCall->getParent()->getParent();
719 Value *NewAlloca = new AllocaInst(AggTy, 0, Align, Arg->getName(),
720 &*Caller->begin()->begin());
722 Type *Tys[3] = {VoidPtrTy, VoidPtrTy, Type::getInt64Ty(Context)};
723 Function *MemCpyFn = Intrinsic::getDeclaration(Caller->getParent(),
726 Value *DestCast = new BitCastInst(NewAlloca, VoidPtrTy, "tmp", TheCall);
727 Value *SrcCast = new BitCastInst(Arg, VoidPtrTy, "tmp", TheCall);
731 Size = ConstantExpr::getSizeOf(AggTy);
733 Size = ConstantInt::get(Type::getInt64Ty(Context),
734 IFI.TD->getTypeStoreSize(AggTy));
736 // Always generate a memcpy of alignment 1 here because we don't know
737 // the alignment of the src pointer. Other optimizations can infer
739 Value *CallArgs[] = {
740 DestCast, SrcCast, Size,
741 ConstantInt::get(Type::getInt32Ty(Context), 1),
742 ConstantInt::getFalse(Context) // isVolatile
744 IRBuilder<>(TheCall).CreateCall(MemCpyFn, CallArgs);
746 // Uses of the argument in the function should use our new alloca
751 // isUsedByLifetimeMarker - Check whether this Value is used by a lifetime
753 static bool isUsedByLifetimeMarker(Value *V) {
754 for (Value::use_iterator UI = V->use_begin(), UE = V->use_end(); UI != UE;
756 if (IntrinsicInst *II = dyn_cast<IntrinsicInst>(*UI)) {
757 switch (II->getIntrinsicID()) {
759 case Intrinsic::lifetime_start:
760 case Intrinsic::lifetime_end:
768 // hasLifetimeMarkers - Check whether the given alloca already has
769 // lifetime.start or lifetime.end intrinsics.
770 static bool hasLifetimeMarkers(AllocaInst *AI) {
771 Type *Int8PtrTy = Type::getInt8PtrTy(AI->getType()->getContext());
772 if (AI->getType() == Int8PtrTy)
773 return isUsedByLifetimeMarker(AI);
775 // Do a scan to find all the casts to i8*.
776 for (Value::use_iterator I = AI->use_begin(), E = AI->use_end(); I != E;
778 if (I->getType() != Int8PtrTy) continue;
779 if (I->stripPointerCasts() != AI) continue;
780 if (isUsedByLifetimeMarker(*I))
786 /// updateInlinedAtInfo - Helper function used by fixupLineNumbers to recursively
787 /// update InlinedAtEntry of a DebugLoc.
788 static DebugLoc updateInlinedAtInfo(const DebugLoc &DL,
789 const DebugLoc &InlinedAtDL,
791 if (MDNode *IA = DL.getInlinedAt(Ctx)) {
792 DebugLoc NewInlinedAtDL
793 = updateInlinedAtInfo(DebugLoc::getFromDILocation(IA), InlinedAtDL, Ctx);
794 return DebugLoc::get(DL.getLine(), DL.getCol(), DL.getScope(Ctx),
795 NewInlinedAtDL.getAsMDNode(Ctx));
798 return DebugLoc::get(DL.getLine(), DL.getCol(), DL.getScope(Ctx),
799 InlinedAtDL.getAsMDNode(Ctx));
803 /// fixupLineNumbers - Update inlined instructions' line numbers to
804 /// to encode location where these instructions are inlined.
805 static void fixupLineNumbers(Function *Fn, Function::iterator FI,
806 Instruction *TheCall) {
807 DebugLoc TheCallDL = TheCall->getDebugLoc();
808 if (TheCallDL.isUnknown())
811 for (; FI != Fn->end(); ++FI) {
812 for (BasicBlock::iterator BI = FI->begin(), BE = FI->end();
814 DebugLoc DL = BI->getDebugLoc();
815 if (!DL.isUnknown()) {
816 BI->setDebugLoc(updateInlinedAtInfo(DL, TheCallDL, BI->getContext()));
817 if (DbgValueInst *DVI = dyn_cast<DbgValueInst>(BI)) {
818 LLVMContext &Ctx = BI->getContext();
819 MDNode *InlinedAt = BI->getDebugLoc().getInlinedAt(Ctx);
820 DVI->setOperand(2, createInlinedVariable(DVI->getVariable(),
828 /// InlineFunction - This function inlines the called function into the basic
829 /// block of the caller. This returns false if it is not possible to inline
830 /// this call. The program is still in a well defined state if this occurs
833 /// Note that this only does one level of inlining. For example, if the
834 /// instruction 'call B' is inlined, and 'B' calls 'C', then the call to 'C' now
835 /// exists in the instruction stream. Similarly this will inline a recursive
836 /// function by one level.
837 bool llvm::InlineFunction(CallSite CS, InlineFunctionInfo &IFI) {
838 Instruction *TheCall = CS.getInstruction();
839 LLVMContext &Context = TheCall->getContext();
840 assert(TheCall->getParent() && TheCall->getParent()->getParent() &&
841 "Instruction not in function!");
843 // If IFI has any state in it, zap it before we fill it in.
846 const Function *CalledFunc = CS.getCalledFunction();
847 if (CalledFunc == 0 || // Can't inline external function or indirect
848 CalledFunc->isDeclaration() || // call, or call to a vararg function!
849 CalledFunc->getFunctionType()->isVarArg()) return false;
851 // If the call to the callee is not a tail call, we must clear the 'tail'
852 // flags on any calls that we inline.
853 bool MustClearTailCallFlags =
854 !(isa<CallInst>(TheCall) && cast<CallInst>(TheCall)->isTailCall());
856 // If the call to the callee cannot throw, set the 'nounwind' flag on any
857 // calls that we inline.
858 bool MarkNoUnwind = CS.doesNotThrow();
860 BasicBlock *OrigBB = TheCall->getParent();
861 Function *Caller = OrigBB->getParent();
863 // GC poses two hazards to inlining, which only occur when the callee has GC:
864 // 1. If the caller has no GC, then the callee's GC must be propagated to the
866 // 2. If the caller has a differing GC, it is invalid to inline.
867 if (CalledFunc->hasGC()) {
868 if (!Caller->hasGC())
869 Caller->setGC(CalledFunc->getGC());
870 else if (CalledFunc->getGC() != Caller->getGC())
874 // Get the personality function from the callee if it contains a landing pad.
875 Value *CalleePersonality = 0;
876 for (Function::const_iterator I = CalledFunc->begin(), E = CalledFunc->end();
878 if (const InvokeInst *II = dyn_cast<InvokeInst>(I->getTerminator())) {
879 const BasicBlock *BB = II->getUnwindDest();
880 const LandingPadInst *LP = BB->getLandingPadInst();
881 CalleePersonality = LP->getPersonalityFn();
885 // Find the personality function used by the landing pads of the caller. If it
886 // exists, then check to see that it matches the personality function used in
888 if (CalleePersonality) {
889 for (Function::const_iterator I = Caller->begin(), E = Caller->end();
891 if (const InvokeInst *II = dyn_cast<InvokeInst>(I->getTerminator())) {
892 const BasicBlock *BB = II->getUnwindDest();
893 const LandingPadInst *LP = BB->getLandingPadInst();
895 // If the personality functions match, then we can perform the
896 // inlining. Otherwise, we can't inline.
897 // TODO: This isn't 100% true. Some personality functions are proper
898 // supersets of others and can be used in place of the other.
899 if (LP->getPersonalityFn() != CalleePersonality)
906 // Get an iterator to the last basic block in the function, which will have
907 // the new function inlined after it.
909 Function::iterator LastBlock = &Caller->back();
911 // Make sure to capture all of the return instructions from the cloned
913 SmallVector<ReturnInst*, 8> Returns;
914 ClonedCodeInfo InlinedFunctionInfo;
915 Function::iterator FirstNewBlock;
917 { // Scope to destroy VMap after cloning.
918 ValueToValueMapTy VMap;
920 assert(CalledFunc->arg_size() == CS.arg_size() &&
921 "No varargs calls can be inlined!");
923 // Calculate the vector of arguments to pass into the function cloner, which
924 // matches up the formal to the actual argument values.
925 CallSite::arg_iterator AI = CS.arg_begin();
927 for (Function::const_arg_iterator I = CalledFunc->arg_begin(),
928 E = CalledFunc->arg_end(); I != E; ++I, ++AI, ++ArgNo) {
929 Value *ActualArg = *AI;
931 // When byval arguments actually inlined, we need to make the copy implied
932 // by them explicit. However, we don't do this if the callee is readonly
933 // or readnone, because the copy would be unneeded: the callee doesn't
934 // modify the struct.
935 if (CS.isByValArgument(ArgNo)) {
936 ActualArg = HandleByValArgument(ActualArg, TheCall, CalledFunc, IFI,
937 CalledFunc->getParamAlignment(ArgNo+1));
939 // Calls that we inline may use the new alloca, so we need to clear
940 // their 'tail' flags if HandleByValArgument introduced a new alloca and
941 // the callee has calls.
942 MustClearTailCallFlags |= ActualArg != *AI;
948 // We want the inliner to prune the code as it copies. We would LOVE to
949 // have no dead or constant instructions leftover after inlining occurs
950 // (which can happen, e.g., because an argument was constant), but we'll be
951 // happy with whatever the cloner can do.
952 CloneAndPruneFunctionInto(Caller, CalledFunc, VMap,
953 /*ModuleLevelChanges=*/false, Returns, ".i",
954 &InlinedFunctionInfo, IFI.TD, TheCall);
956 // Remember the first block that is newly cloned over.
957 FirstNewBlock = LastBlock; ++FirstNewBlock;
959 // Update the callgraph if requested.
961 UpdateCallGraphAfterInlining(CS, FirstNewBlock, VMap, IFI);
963 // Update inlined instructions' line number information.
964 fixupLineNumbers(Caller, FirstNewBlock, TheCall);
967 // If there are any alloca instructions in the block that used to be the entry
968 // block for the callee, move them to the entry block of the caller. First
969 // calculate which instruction they should be inserted before. We insert the
970 // instructions at the end of the current alloca list.
972 BasicBlock::iterator InsertPoint = Caller->begin()->begin();
973 for (BasicBlock::iterator I = FirstNewBlock->begin(),
974 E = FirstNewBlock->end(); I != E; ) {
975 AllocaInst *AI = dyn_cast<AllocaInst>(I++);
976 if (AI == 0) continue;
978 // If the alloca is now dead, remove it. This often occurs due to code
980 if (AI->use_empty()) {
981 AI->eraseFromParent();
985 if (!isa<Constant>(AI->getArraySize()))
988 // Keep track of the static allocas that we inline into the caller.
989 IFI.StaticAllocas.push_back(AI);
991 // Scan for the block of allocas that we can move over, and move them
993 while (isa<AllocaInst>(I) &&
994 isa<Constant>(cast<AllocaInst>(I)->getArraySize())) {
995 IFI.StaticAllocas.push_back(cast<AllocaInst>(I));
999 // Transfer all of the allocas over in a block. Using splice means
1000 // that the instructions aren't removed from the symbol table, then
1002 Caller->getEntryBlock().getInstList().splice(InsertPoint,
1003 FirstNewBlock->getInstList(),
1008 // Leave lifetime markers for the static alloca's, scoping them to the
1009 // function we just inlined.
1010 if (!IFI.StaticAllocas.empty()) {
1011 IRBuilder<> builder(FirstNewBlock->begin());
1012 for (unsigned ai = 0, ae = IFI.StaticAllocas.size(); ai != ae; ++ai) {
1013 AllocaInst *AI = IFI.StaticAllocas[ai];
1015 // If the alloca is already scoped to something smaller than the whole
1016 // function then there's no need to add redundant, less accurate markers.
1017 if (hasLifetimeMarkers(AI))
1020 builder.CreateLifetimeStart(AI);
1021 for (unsigned ri = 0, re = Returns.size(); ri != re; ++ri) {
1022 IRBuilder<> builder(Returns[ri]);
1023 builder.CreateLifetimeEnd(AI);
1028 // If the inlined code contained dynamic alloca instructions, wrap the inlined
1029 // code with llvm.stacksave/llvm.stackrestore intrinsics.
1030 if (InlinedFunctionInfo.ContainsDynamicAllocas) {
1031 Module *M = Caller->getParent();
1032 // Get the two intrinsics we care about.
1033 Function *StackSave = Intrinsic::getDeclaration(M, Intrinsic::stacksave);
1034 Function *StackRestore=Intrinsic::getDeclaration(M,Intrinsic::stackrestore);
1036 // Insert the llvm.stacksave.
1037 CallInst *SavedPtr = IRBuilder<>(FirstNewBlock, FirstNewBlock->begin())
1038 .CreateCall(StackSave, "savedstack");
1040 // Insert a call to llvm.stackrestore before any return instructions in the
1041 // inlined function.
1042 for (unsigned i = 0, e = Returns.size(); i != e; ++i) {
1043 IRBuilder<>(Returns[i]).CreateCall(StackRestore, SavedPtr);
1046 // Count the number of StackRestore calls we insert.
1047 unsigned NumStackRestores = Returns.size();
1049 // If we are inlining an invoke instruction, insert restores before each
1050 // unwind. These unwinds will be rewritten into branches later.
1051 if (InlinedFunctionInfo.ContainsUnwinds && isa<InvokeInst>(TheCall)) {
1052 for (Function::iterator BB = FirstNewBlock, E = Caller->end();
1054 if (UnwindInst *UI = dyn_cast<UnwindInst>(BB->getTerminator())) {
1055 IRBuilder<>(UI).CreateCall(StackRestore, SavedPtr);
1061 // If we are inlining tail call instruction through a call site that isn't
1062 // marked 'tail', we must remove the tail marker for any calls in the inlined
1063 // code. Also, calls inlined through a 'nounwind' call site should be marked
1065 if (InlinedFunctionInfo.ContainsCalls &&
1066 (MustClearTailCallFlags || MarkNoUnwind)) {
1067 for (Function::iterator BB = FirstNewBlock, E = Caller->end();
1069 for (BasicBlock::iterator I = BB->begin(), E = BB->end(); I != E; ++I)
1070 if (CallInst *CI = dyn_cast<CallInst>(I)) {
1071 if (MustClearTailCallFlags)
1072 CI->setTailCall(false);
1074 CI->setDoesNotThrow();
1078 // If we are inlining through a 'nounwind' call site then any inlined 'unwind'
1079 // instructions are unreachable.
1080 if (InlinedFunctionInfo.ContainsUnwinds && MarkNoUnwind)
1081 for (Function::iterator BB = FirstNewBlock, E = Caller->end();
1083 TerminatorInst *Term = BB->getTerminator();
1084 if (isa<UnwindInst>(Term)) {
1085 new UnreachableInst(Context, Term);
1086 BB->getInstList().erase(Term);
1090 // If we are inlining for an invoke instruction, we must make sure to rewrite
1091 // any inlined 'unwind' instructions into branches to the invoke exception
1092 // destination, and call instructions into invoke instructions.
1093 if (InvokeInst *II = dyn_cast<InvokeInst>(TheCall))
1094 HandleInlinedInvoke(II, FirstNewBlock, InlinedFunctionInfo);
1096 // If we cloned in _exactly one_ basic block, and if that block ends in a
1097 // return instruction, we splice the body of the inlined callee directly into
1098 // the calling basic block.
1099 if (Returns.size() == 1 && std::distance(FirstNewBlock, Caller->end()) == 1) {
1100 // Move all of the instructions right before the call.
1101 OrigBB->getInstList().splice(TheCall, FirstNewBlock->getInstList(),
1102 FirstNewBlock->begin(), FirstNewBlock->end());
1103 // Remove the cloned basic block.
1104 Caller->getBasicBlockList().pop_back();
1106 // If the call site was an invoke instruction, add a branch to the normal
1108 if (InvokeInst *II = dyn_cast<InvokeInst>(TheCall))
1109 BranchInst::Create(II->getNormalDest(), TheCall);
1111 // If the return instruction returned a value, replace uses of the call with
1112 // uses of the returned value.
1113 if (!TheCall->use_empty()) {
1114 ReturnInst *R = Returns[0];
1115 if (TheCall == R->getReturnValue())
1116 TheCall->replaceAllUsesWith(UndefValue::get(TheCall->getType()));
1118 TheCall->replaceAllUsesWith(R->getReturnValue());
1120 // Since we are now done with the Call/Invoke, we can delete it.
1121 TheCall->eraseFromParent();
1123 // Since we are now done with the return instruction, delete it also.
1124 Returns[0]->eraseFromParent();
1126 // We are now done with the inlining.
1130 // Otherwise, we have the normal case, of more than one block to inline or
1131 // multiple return sites.
1133 // We want to clone the entire callee function into the hole between the
1134 // "starter" and "ender" blocks. How we accomplish this depends on whether
1135 // this is an invoke instruction or a call instruction.
1136 BasicBlock *AfterCallBB;
1137 if (InvokeInst *II = dyn_cast<InvokeInst>(TheCall)) {
1139 // Add an unconditional branch to make this look like the CallInst case...
1140 BranchInst *NewBr = BranchInst::Create(II->getNormalDest(), TheCall);
1142 // Split the basic block. This guarantees that no PHI nodes will have to be
1143 // updated due to new incoming edges, and make the invoke case more
1144 // symmetric to the call case.
1145 AfterCallBB = OrigBB->splitBasicBlock(NewBr,
1146 CalledFunc->getName()+".exit");
1148 } else { // It's a call
1149 // If this is a call instruction, we need to split the basic block that
1150 // the call lives in.
1152 AfterCallBB = OrigBB->splitBasicBlock(TheCall,
1153 CalledFunc->getName()+".exit");
1156 // Change the branch that used to go to AfterCallBB to branch to the first
1157 // basic block of the inlined function.
1159 TerminatorInst *Br = OrigBB->getTerminator();
1160 assert(Br && Br->getOpcode() == Instruction::Br &&
1161 "splitBasicBlock broken!");
1162 Br->setOperand(0, FirstNewBlock);
1165 // Now that the function is correct, make it a little bit nicer. In
1166 // particular, move the basic blocks inserted from the end of the function
1167 // into the space made by splitting the source basic block.
1168 Caller->getBasicBlockList().splice(AfterCallBB, Caller->getBasicBlockList(),
1169 FirstNewBlock, Caller->end());
1171 // Handle all of the return instructions that we just cloned in, and eliminate
1172 // any users of the original call/invoke instruction.
1173 Type *RTy = CalledFunc->getReturnType();
1176 if (Returns.size() > 1) {
1177 // The PHI node should go at the front of the new basic block to merge all
1178 // possible incoming values.
1179 if (!TheCall->use_empty()) {
1180 PHI = PHINode::Create(RTy, Returns.size(), TheCall->getName(),
1181 AfterCallBB->begin());
1182 // Anything that used the result of the function call should now use the
1183 // PHI node as their operand.
1184 TheCall->replaceAllUsesWith(PHI);
1187 // Loop over all of the return instructions adding entries to the PHI node
1190 for (unsigned i = 0, e = Returns.size(); i != e; ++i) {
1191 ReturnInst *RI = Returns[i];
1192 assert(RI->getReturnValue()->getType() == PHI->getType() &&
1193 "Ret value not consistent in function!");
1194 PHI->addIncoming(RI->getReturnValue(), RI->getParent());
1199 // Add a branch to the merge points and remove return instructions.
1200 for (unsigned i = 0, e = Returns.size(); i != e; ++i) {
1201 ReturnInst *RI = Returns[i];
1202 BranchInst::Create(AfterCallBB, RI);
1203 RI->eraseFromParent();
1205 } else if (!Returns.empty()) {
1206 // Otherwise, if there is exactly one return value, just replace anything
1207 // using the return value of the call with the computed value.
1208 if (!TheCall->use_empty()) {
1209 if (TheCall == Returns[0]->getReturnValue())
1210 TheCall->replaceAllUsesWith(UndefValue::get(TheCall->getType()));
1212 TheCall->replaceAllUsesWith(Returns[0]->getReturnValue());
1215 // Update PHI nodes that use the ReturnBB to use the AfterCallBB.
1216 BasicBlock *ReturnBB = Returns[0]->getParent();
1217 ReturnBB->replaceAllUsesWith(AfterCallBB);
1219 // Splice the code from the return block into the block that it will return
1220 // to, which contains the code that was after the call.
1221 AfterCallBB->getInstList().splice(AfterCallBB->begin(),
1222 ReturnBB->getInstList());
1224 // Delete the return instruction now and empty ReturnBB now.
1225 Returns[0]->eraseFromParent();
1226 ReturnBB->eraseFromParent();
1227 } else if (!TheCall->use_empty()) {
1228 // No returns, but something is using the return value of the call. Just
1230 TheCall->replaceAllUsesWith(UndefValue::get(TheCall->getType()));
1233 // Since we are now done with the Call/Invoke, we can delete it.
1234 TheCall->eraseFromParent();
1236 // We should always be able to fold the entry block of the function into the
1237 // single predecessor of the block...
1238 assert(cast<BranchInst>(Br)->isUnconditional() && "splitBasicBlock broken!");
1239 BasicBlock *CalleeEntry = cast<BranchInst>(Br)->getSuccessor(0);
1241 // Splice the code entry block into calling block, right before the
1242 // unconditional branch.
1243 CalleeEntry->replaceAllUsesWith(OrigBB); // Update PHI nodes
1244 OrigBB->getInstList().splice(Br, CalleeEntry->getInstList());
1246 // Remove the unconditional branch.
1247 OrigBB->getInstList().erase(Br);
1249 // Now we can remove the CalleeEntry block, which is now empty.
1250 Caller->getBasicBlockList().erase(CalleeEntry);
1252 // If we inserted a phi node, check to see if it has a single value (e.g. all
1253 // the entries are the same or undef). If so, remove the PHI so it doesn't
1254 // block other optimizations.
1256 if (Value *V = SimplifyInstruction(PHI, IFI.TD)) {
1257 PHI->replaceAllUsesWith(V);
1258 PHI->eraseFromParent();