1 //===-- PPCISelLowering.h - PPC32 DAG Lowering Interface --------*- C++ -*-===//
3 // The LLVM Compiler Infrastructure
5 // This file is distributed under the University of Illinois Open Source
6 // License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
10 // This file defines the interfaces that PPC uses to lower LLVM code into a
13 //===----------------------------------------------------------------------===//
15 #ifndef LLVM_TARGET_POWERPC_PPC32ISELLOWERING_H
16 #define LLVM_TARGET_POWERPC_PPC32ISELLOWERING_H
19 #include "PPCInstrInfo.h"
20 #include "PPCRegisterInfo.h"
21 #include "PPCSubtarget.h"
22 #include "llvm/CodeGen/SelectionDAG.h"
23 #include "llvm/Target/TargetLowering.h"
28 // Start the numbering where the builtin ops and target ops leave off.
29 FIRST_NUMBER = ISD::BUILTIN_OP_END,
31 /// FSEL - Traditional three-operand fsel node.
35 /// FCFID - The FCFID instruction, taking an f64 operand and producing
36 /// and f64 value containing the FP representation of the integer that
37 /// was temporarily in the f64 operand.
40 /// Newer FCFID[US] integer-to-floating-point conversion instructions for
41 /// unsigned integers and single-precision outputs.
42 FCFIDU, FCFIDS, FCFIDUS,
44 /// FCTI[D,W]Z - The FCTIDZ and FCTIWZ instructions, taking an f32 or f64
45 /// operand, producing an f64 value containing the integer representation
49 /// Newer FCTI[D,W]UZ floating-point-to-integer conversion instructions for
50 /// unsigned integers.
53 /// Reciprocal estimate instructions (unary FP ops).
56 // VMADDFP, VNMSUBFP - The VMADDFP and VNMSUBFP instructions, taking
57 // three v4f32 operands and producing a v4f32 result.
60 /// VPERM - The PPC VPERM Instruction.
64 /// Hi/Lo - These represent the high and low 16-bit parts of a global
65 /// address respectively. These nodes have two operands, the first of
66 /// which must be a TargetGlobalAddress, and the second of which must be a
67 /// Constant. Selected naively, these turn into 'lis G+C' and 'li G+C',
68 /// though these are usually folded into other nodes.
73 /// The following three target-specific nodes are used for calls through
74 /// function pointers in the 64-bit SVR4 ABI.
76 /// Restore the TOC from the TOC save area of the current stack frame.
77 /// This is basically a hard coded load instruction which additionally
78 /// takes/produces a flag.
81 /// Like a regular LOAD but additionally taking/producing a flag.
84 /// LOAD into r2 (also taking/producing a flag). Like TOC_RESTORE, this is
85 /// a hard coded load instruction.
88 /// OPRC, CHAIN = DYNALLOC(CHAIN, NEGSIZE, FRAME_INDEX)
89 /// This instruction is lowered in PPCRegisterInfo::eliminateFrameIndex to
90 /// compute an allocation on the stack.
93 /// GlobalBaseReg - On Darwin, this node represents the result of the mflr
94 /// at function entry, used for PIC code.
97 /// These nodes represent the 32-bit PPC shifts that operate on 6-bit
98 /// shift amounts. These nodes are generated by the multi-precision shift
102 /// CALL - A direct function call.
103 /// CALL_NOP is a call with the special NOP which follows 64-bit
107 /// CHAIN,FLAG = MTCTR(VAL, CHAIN[, INFLAG]) - Directly corresponds to a
108 /// MTCTR instruction.
111 /// CHAIN,FLAG = BCTRL(CHAIN, INFLAG) - Directly corresponds to a
112 /// BCTRL instruction.
115 /// Return with a flag operand, matched by 'blr'
118 /// R32 = MFCR(CRREG, INFLAG) - Represents the MFCRpseud/MFOCRF
119 /// instructions. This copies the bits corresponding to the specified
120 /// CRREG into the resultant GPR. Bits corresponding to other CR regs
124 // EH_SJLJ_SETJMP - SjLj exception handling setjmp.
127 // EH_SJLJ_LONGJMP - SjLj exception handling longjmp.
130 /// RESVEC = VCMP(LHS, RHS, OPC) - Represents one of the altivec VCMP*
131 /// instructions. For lack of better number, we use the opcode number
132 /// encoding for the OPC field to identify the compare. For example, 838
136 /// RESVEC, OUTFLAG = VCMPo(LHS, RHS, OPC) - Represents one of the
137 /// altivec VCMP*o instructions. For lack of better number, we use the
138 /// opcode number encoding for the OPC field to identify the compare. For
139 /// example, 838 is VCMPGTSH.
142 /// CHAIN = COND_BRANCH CHAIN, CRRC, OPC, DESTBB [, INFLAG] - This
143 /// corresponds to the COND_BRANCH pseudo instruction. CRRC is the
144 /// condition register to branch on, OPC is the branch opcode to use (e.g.
145 /// PPC::BLE), DESTBB is the destination block to branch to, and INFLAG is
146 /// an optional input flag argument.
149 /// F8RC = FADDRTZ F8RC, F8RC - This is an FADD done with rounding
150 /// towards zero. Used only as part of the long double-to-int
151 /// conversion sequence.
154 /// F8RC = MFFS - This moves the FPSCR (not modeled) into the register.
157 /// LARX = This corresponds to PPC l{w|d}arx instrcution: load and
158 /// reserve indexed. This is used to implement atomic operations.
161 /// STCX = This corresponds to PPC stcx. instrcution: store conditional
162 /// indexed. This is used to implement atomic operations.
165 /// TC_RETURN - A tail call return.
167 /// operand #1 callee (register or absolute)
168 /// operand #2 stack adjustment
169 /// operand #3 optional in flag
172 /// ch, gl = CR6[UN]SET ch, inglue - Toggle CR bit 6 for SVR4 vararg calls
176 /// G8RC = ADDIS_GOT_TPREL_HA %X2, Symbol - Used by the initial-exec
177 /// TLS model, produces an ADDIS8 instruction that adds the GOT
178 /// base to sym\@got\@tprel\@ha.
181 /// G8RC = LD_GOT_TPREL_L Symbol, G8RReg - Used by the initial-exec
182 /// TLS model, produces a LD instruction with base register G8RReg
183 /// and offset sym\@got\@tprel\@l. This completes the addition that
184 /// finds the offset of "sym" relative to the thread pointer.
187 /// G8RC = ADD_TLS G8RReg, Symbol - Used by the initial-exec TLS
188 /// model, produces an ADD instruction that adds the contents of
189 /// G8RReg to the thread pointer. Symbol contains a relocation
190 /// sym\@tls which is to be replaced by the thread pointer and
191 /// identifies to the linker that the instruction is part of a
195 /// G8RC = ADDIS_TLSGD_HA %X2, Symbol - For the general-dynamic TLS
196 /// model, produces an ADDIS8 instruction that adds the GOT base
197 /// register to sym\@got\@tlsgd\@ha.
200 /// G8RC = ADDI_TLSGD_L G8RReg, Symbol - For the general-dynamic TLS
201 /// model, produces an ADDI8 instruction that adds G8RReg to
202 /// sym\@got\@tlsgd\@l.
205 /// G8RC = GET_TLS_ADDR %X3, Symbol - For the general-dynamic TLS
206 /// model, produces a call to __tls_get_addr(sym\@tlsgd).
209 /// G8RC = ADDIS_TLSLD_HA %X2, Symbol - For the local-dynamic TLS
210 /// model, produces an ADDIS8 instruction that adds the GOT base
211 /// register to sym\@got\@tlsld\@ha.
214 /// G8RC = ADDI_TLSLD_L G8RReg, Symbol - For the local-dynamic TLS
215 /// model, produces an ADDI8 instruction that adds G8RReg to
216 /// sym\@got\@tlsld\@l.
219 /// G8RC = GET_TLSLD_ADDR %X3, Symbol - For the local-dynamic TLS
220 /// model, produces a call to __tls_get_addr(sym\@tlsld).
223 /// G8RC = ADDIS_DTPREL_HA %X3, Symbol, Chain - For the
224 /// local-dynamic TLS model, produces an ADDIS8 instruction
225 /// that adds X3 to sym\@dtprel\@ha. The Chain operand is needed
226 /// to tie this in place following a copy to %X3 from the result
227 /// of a GET_TLSLD_ADDR.
230 /// G8RC = ADDI_DTPREL_L G8RReg, Symbol - For the local-dynamic TLS
231 /// model, produces an ADDI8 instruction that adds G8RReg to
232 /// sym\@got\@dtprel\@l.
235 /// VRRC = VADD_SPLAT Elt, EltSize - Temporary node to be expanded
236 /// during instruction selection to optimize a BUILD_VECTOR into
237 /// operations on splats. This is necessary to avoid losing these
238 /// optimizations due to constant folding.
241 /// CHAIN = SC CHAIN, Imm128 - System call. The 7-bit unsigned
242 /// operand identifies the operating system entry point.
245 /// CHAIN = STBRX CHAIN, GPRC, Ptr, Type - This is a
246 /// byte-swapping store instruction. It byte-swaps the low "Type" bits of
247 /// the GPRC input, then stores it through Ptr. Type can be either i16 or
249 STBRX = ISD::FIRST_TARGET_MEMORY_OPCODE,
251 /// GPRC, CHAIN = LBRX CHAIN, Ptr, Type - This is a
252 /// byte-swapping load instruction. It loads "Type" bits, byte swaps it,
253 /// then puts it in the bottom bits of the GPRC. TYPE can be either i16
257 /// STFIWX - The STFIWX instruction. The first operand is an input token
258 /// chain, then an f64 value to store, then an address to store it to.
261 /// GPRC, CHAIN = LFIWAX CHAIN, Ptr - This is a floating-point
262 /// load which sign-extends from a 32-bit integer value into the
263 /// destination 64-bit register.
266 /// GPRC, CHAIN = LFIWZX CHAIN, Ptr - This is a floating-point
267 /// load which zero-extends from a 32-bit integer value into the
268 /// destination 64-bit register.
271 /// G8RC = ADDIS_TOC_HA %X2, Symbol - For medium and large code model,
272 /// produces an ADDIS8 instruction that adds the TOC base register to
276 /// G8RC = LD_TOC_L Symbol, G8RReg - For medium and large code model,
277 /// produces a LD instruction with base register G8RReg and offset
278 /// sym\@toc\@l. Preceded by an ADDIS_TOC_HA to form a full 32-bit offset.
281 /// G8RC = ADDI_TOC_L G8RReg, Symbol - For medium code model, produces
282 /// an ADDI8 instruction that adds G8RReg to sym\@toc\@l.
283 /// Preceded by an ADDIS_TOC_HA to form a full 32-bit offset.
288 /// Define some predicates that are used for node matching.
290 /// isVPKUHUMShuffleMask - Return true if this is the shuffle mask for a
291 /// VPKUHUM instruction.
292 bool isVPKUHUMShuffleMask(ShuffleVectorSDNode *N, bool isUnary);
294 /// isVPKUWUMShuffleMask - Return true if this is the shuffle mask for a
295 /// VPKUWUM instruction.
296 bool isVPKUWUMShuffleMask(ShuffleVectorSDNode *N, bool isUnary);
298 /// isVMRGLShuffleMask - Return true if this is a shuffle mask suitable for
299 /// a VRGL* instruction with the specified unit size (1,2 or 4 bytes).
300 bool isVMRGLShuffleMask(ShuffleVectorSDNode *N, unsigned UnitSize,
303 /// isVMRGHShuffleMask - Return true if this is a shuffle mask suitable for
304 /// a VRGH* instruction with the specified unit size (1,2 or 4 bytes).
305 bool isVMRGHShuffleMask(ShuffleVectorSDNode *N, unsigned UnitSize,
308 /// isVSLDOIShuffleMask - If this is a vsldoi shuffle mask, return the shift
309 /// amount, otherwise return -1.
310 int isVSLDOIShuffleMask(SDNode *N, bool isUnary);
312 /// isSplatShuffleMask - Return true if the specified VECTOR_SHUFFLE operand
313 /// specifies a splat of a single element that is suitable for input to
314 /// VSPLTB/VSPLTH/VSPLTW.
315 bool isSplatShuffleMask(ShuffleVectorSDNode *N, unsigned EltSize);
317 /// isAllNegativeZeroVector - Returns true if all elements of build_vector
319 bool isAllNegativeZeroVector(SDNode *N);
321 /// getVSPLTImmediate - Return the appropriate VSPLT* immediate to splat the
322 /// specified isSplatShuffleMask VECTOR_SHUFFLE mask.
323 unsigned getVSPLTImmediate(SDNode *N, unsigned EltSize);
325 /// get_VSPLTI_elt - If this is a build_vector of constants which can be
326 /// formed by using a vspltis[bhw] instruction of the specified element
327 /// size, return the constant being splatted. The ByteSize field indicates
328 /// the number of bytes of each element [124] -> [bhw].
329 SDValue get_VSPLTI_elt(SDNode *N, unsigned ByteSize, SelectionDAG &DAG);
332 class PPCTargetLowering : public TargetLowering {
333 const PPCSubtarget &PPCSubTarget;
334 const PPCRegisterInfo *PPCRegInfo;
335 const PPCInstrInfo *PPCII;
338 explicit PPCTargetLowering(PPCTargetMachine &TM);
340 /// getTargetNodeName() - This method returns the name of a target specific
342 virtual const char *getTargetNodeName(unsigned Opcode) const;
344 virtual MVT getScalarShiftAmountTy(EVT LHSTy) const { return MVT::i32; }
346 /// getSetCCResultType - Return the ISD::SETCC ValueType
347 virtual EVT getSetCCResultType(EVT VT) const;
349 /// getPreIndexedAddressParts - returns true by value, base pointer and
350 /// offset pointer and addressing mode by reference if the node's address
351 /// can be legally represented as pre-indexed load / store address.
352 virtual bool getPreIndexedAddressParts(SDNode *N, SDValue &Base,
354 ISD::MemIndexedMode &AM,
355 SelectionDAG &DAG) const;
357 /// SelectAddressRegReg - Given the specified addressed, check to see if it
358 /// can be represented as an indexed [r+r] operation. Returns false if it
359 /// can be more efficiently represented with [r+imm].
360 bool SelectAddressRegReg(SDValue N, SDValue &Base, SDValue &Index,
361 SelectionDAG &DAG) const;
363 /// SelectAddressRegImm - Returns true if the address N can be represented
364 /// by a base register plus a signed 16-bit displacement [r+imm], and if it
365 /// is not better represented as reg+reg.
366 bool SelectAddressRegImm(SDValue N, SDValue &Disp, SDValue &Base,
367 SelectionDAG &DAG) const;
369 /// SelectAddressRegRegOnly - Given the specified addressed, force it to be
370 /// represented as an indexed [r+r] operation.
371 bool SelectAddressRegRegOnly(SDValue N, SDValue &Base, SDValue &Index,
372 SelectionDAG &DAG) const;
374 /// SelectAddressRegImmShift - Returns true if the address N can be
375 /// represented by a base register plus a signed 14-bit displacement
376 /// [r+imm*4]. Suitable for use by STD and friends.
377 bool SelectAddressRegImmShift(SDValue N, SDValue &Disp, SDValue &Base,
378 SelectionDAG &DAG) const;
380 Sched::Preference getSchedulingPreference(SDNode *N) const;
382 /// LowerOperation - Provide custom lowering hooks for some operations.
384 virtual SDValue LowerOperation(SDValue Op, SelectionDAG &DAG) const;
386 /// ReplaceNodeResults - Replace the results of node with an illegal result
387 /// type with new values built out of custom code.
389 virtual void ReplaceNodeResults(SDNode *N, SmallVectorImpl<SDValue>&Results,
390 SelectionDAG &DAG) const;
392 virtual SDValue PerformDAGCombine(SDNode *N, DAGCombinerInfo &DCI) const;
394 virtual void computeMaskedBitsForTargetNode(const SDValue Op,
397 const SelectionDAG &DAG,
398 unsigned Depth = 0) const;
400 virtual MachineBasicBlock *
401 EmitInstrWithCustomInserter(MachineInstr *MI,
402 MachineBasicBlock *MBB) const;
403 MachineBasicBlock *EmitAtomicBinary(MachineInstr *MI,
404 MachineBasicBlock *MBB, bool is64Bit,
405 unsigned BinOpcode) const;
406 MachineBasicBlock *EmitPartwordAtomicBinary(MachineInstr *MI,
407 MachineBasicBlock *MBB,
408 bool is8bit, unsigned Opcode) const;
410 MachineBasicBlock *emitEHSjLjSetJmp(MachineInstr *MI,
411 MachineBasicBlock *MBB) const;
413 MachineBasicBlock *emitEHSjLjLongJmp(MachineInstr *MI,
414 MachineBasicBlock *MBB) const;
416 ConstraintType getConstraintType(const std::string &Constraint) const;
418 /// Examine constraint string and operand type and determine a weight value.
419 /// The operand object must already have been set up with the operand type.
420 ConstraintWeight getSingleConstraintMatchWeight(
421 AsmOperandInfo &info, const char *constraint) const;
423 std::pair<unsigned, const TargetRegisterClass*>
424 getRegForInlineAsmConstraint(const std::string &Constraint,
427 /// getByValTypeAlignment - Return the desired alignment for ByVal aggregate
428 /// function arguments in the caller parameter area. This is the actual
429 /// alignment, not its logarithm.
430 unsigned getByValTypeAlignment(Type *Ty) const;
432 /// LowerAsmOperandForConstraint - Lower the specified operand into the Ops
433 /// vector. If it is invalid, don't add anything to Ops.
434 virtual void LowerAsmOperandForConstraint(SDValue Op,
435 std::string &Constraint,
436 std::vector<SDValue> &Ops,
437 SelectionDAG &DAG) const;
439 /// isLegalAddressingMode - Return true if the addressing mode represented
440 /// by AM is legal for this target, for a load/store of the specified type.
441 virtual bool isLegalAddressingMode(const AddrMode &AM, Type *Ty)const;
443 virtual bool isOffsetFoldingLegal(const GlobalAddressSDNode *GA) const;
445 /// getOptimalMemOpType - Returns the target specific optimal type for load
446 /// and store operations as a result of memset, memcpy, and memmove
447 /// lowering. If DstAlign is zero that means it's safe to destination
448 /// alignment can satisfy any constraint. Similarly if SrcAlign is zero it
449 /// means there isn't a need to check it against alignment requirement,
450 /// probably because the source does not need to be loaded. If 'IsMemset' is
451 /// true, that means it's expanding a memset. If 'ZeroMemset' is true, that
452 /// means it's a memset of zero. 'MemcpyStrSrc' indicates whether the memcpy
453 /// source is constant so it does not need to be loaded.
454 /// It returns EVT::Other if the type should be determined using generic
455 /// target-independent logic.
457 getOptimalMemOpType(uint64_t Size, unsigned DstAlign, unsigned SrcAlign,
458 bool IsMemset, bool ZeroMemset, bool MemcpyStrSrc,
459 MachineFunction &MF) const;
461 /// Is unaligned memory access allowed for the given type, and is it fast
462 /// relative to software emulation.
463 virtual bool allowsUnalignedMemoryAccesses(EVT VT, bool *Fast = 0) const;
465 /// isFMAFasterThanMulAndAdd - Return true if an FMA operation is faster than
466 /// a pair of mul and add instructions. fmuladd intrinsics will be expanded to
467 /// FMAs when this method returns true (and FMAs are legal), otherwise fmuladd
468 /// is expanded to mul + add.
469 virtual bool isFMAFasterThanMulAndAdd(EVT VT) const;
472 SDValue getFramePointerFrameIndex(SelectionDAG & DAG) const;
473 SDValue getReturnAddrFrameIndex(SelectionDAG & DAG) const;
476 IsEligibleForTailCallOptimization(SDValue Callee,
477 CallingConv::ID CalleeCC,
479 const SmallVectorImpl<ISD::InputArg> &Ins,
480 SelectionDAG& DAG) const;
482 SDValue EmitTailCallLoadFPAndRetAddr(SelectionDAG & DAG,
490 SDValue LowerRETURNADDR(SDValue Op, SelectionDAG &DAG) const;
491 SDValue LowerFRAMEADDR(SDValue Op, SelectionDAG &DAG) const;
492 SDValue LowerConstantPool(SDValue Op, SelectionDAG &DAG) const;
493 SDValue LowerBlockAddress(SDValue Op, SelectionDAG &DAG) const;
494 SDValue LowerGlobalTLSAddress(SDValue Op, SelectionDAG &DAG) const;
495 SDValue LowerGlobalAddress(SDValue Op, SelectionDAG &DAG) const;
496 SDValue LowerJumpTable(SDValue Op, SelectionDAG &DAG) const;
497 SDValue LowerSETCC(SDValue Op, SelectionDAG &DAG) const;
498 SDValue LowerINIT_TRAMPOLINE(SDValue Op, SelectionDAG &DAG) const;
499 SDValue LowerADJUST_TRAMPOLINE(SDValue Op, SelectionDAG &DAG) const;
500 SDValue LowerVASTART(SDValue Op, SelectionDAG &DAG,
501 const PPCSubtarget &Subtarget) const;
502 SDValue LowerVAARG(SDValue Op, SelectionDAG &DAG,
503 const PPCSubtarget &Subtarget) const;
504 SDValue LowerSTACKRESTORE(SDValue Op, SelectionDAG &DAG,
505 const PPCSubtarget &Subtarget) const;
506 SDValue LowerDYNAMIC_STACKALLOC(SDValue Op, SelectionDAG &DAG,
507 const PPCSubtarget &Subtarget) const;
508 SDValue LowerSELECT_CC(SDValue Op, SelectionDAG &DAG) const;
509 SDValue LowerFP_TO_INT(SDValue Op, SelectionDAG &DAG, DebugLoc dl) const;
510 SDValue LowerINT_TO_FP(SDValue Op, SelectionDAG &DAG) const;
511 SDValue LowerFLT_ROUNDS_(SDValue Op, SelectionDAG &DAG) const;
512 SDValue LowerSHL_PARTS(SDValue Op, SelectionDAG &DAG) const;
513 SDValue LowerSRL_PARTS(SDValue Op, SelectionDAG &DAG) const;
514 SDValue LowerSRA_PARTS(SDValue Op, SelectionDAG &DAG) const;
515 SDValue LowerBUILD_VECTOR(SDValue Op, SelectionDAG &DAG) const;
516 SDValue LowerVECTOR_SHUFFLE(SDValue Op, SelectionDAG &DAG) const;
517 SDValue LowerINTRINSIC_WO_CHAIN(SDValue Op, SelectionDAG &DAG) const;
518 SDValue LowerSCALAR_TO_VECTOR(SDValue Op, SelectionDAG &DAG) const;
519 SDValue LowerMUL(SDValue Op, SelectionDAG &DAG) const;
521 SDValue LowerCallResult(SDValue Chain, SDValue InFlag,
522 CallingConv::ID CallConv, bool isVarArg,
523 const SmallVectorImpl<ISD::InputArg> &Ins,
524 DebugLoc dl, SelectionDAG &DAG,
525 SmallVectorImpl<SDValue> &InVals) const;
526 SDValue FinishCall(CallingConv::ID CallConv, DebugLoc dl, bool isTailCall,
529 SmallVector<std::pair<unsigned, SDValue>, 8>
531 SDValue InFlag, SDValue Chain,
533 int SPDiff, unsigned NumBytes,
534 const SmallVectorImpl<ISD::InputArg> &Ins,
535 SmallVectorImpl<SDValue> &InVals) const;
538 LowerFormalArguments(SDValue Chain,
539 CallingConv::ID CallConv, bool isVarArg,
540 const SmallVectorImpl<ISD::InputArg> &Ins,
541 DebugLoc dl, SelectionDAG &DAG,
542 SmallVectorImpl<SDValue> &InVals) const;
545 LowerCall(TargetLowering::CallLoweringInfo &CLI,
546 SmallVectorImpl<SDValue> &InVals) const;
549 CanLowerReturn(CallingConv::ID CallConv, MachineFunction &MF,
551 const SmallVectorImpl<ISD::OutputArg> &Outs,
552 LLVMContext &Context) const;
555 LowerReturn(SDValue Chain,
556 CallingConv::ID CallConv, bool isVarArg,
557 const SmallVectorImpl<ISD::OutputArg> &Outs,
558 const SmallVectorImpl<SDValue> &OutVals,
559 DebugLoc dl, SelectionDAG &DAG) const;
562 extendArgForPPC64(ISD::ArgFlagsTy Flags, EVT ObjectVT, SelectionDAG &DAG,
563 SDValue ArgVal, DebugLoc dl) const;
566 setMinReservedArea(MachineFunction &MF, SelectionDAG &DAG,
567 unsigned nAltivecParamsAtEnd,
568 unsigned MinReservedArea, bool isPPC64) const;
571 LowerFormalArguments_Darwin(SDValue Chain,
572 CallingConv::ID CallConv, bool isVarArg,
573 const SmallVectorImpl<ISD::InputArg> &Ins,
574 DebugLoc dl, SelectionDAG &DAG,
575 SmallVectorImpl<SDValue> &InVals) const;
577 LowerFormalArguments_64SVR4(SDValue Chain,
578 CallingConv::ID CallConv, bool isVarArg,
579 const SmallVectorImpl<ISD::InputArg> &Ins,
580 DebugLoc dl, SelectionDAG &DAG,
581 SmallVectorImpl<SDValue> &InVals) const;
583 LowerFormalArguments_32SVR4(SDValue Chain,
584 CallingConv::ID CallConv, bool isVarArg,
585 const SmallVectorImpl<ISD::InputArg> &Ins,
586 DebugLoc dl, SelectionDAG &DAG,
587 SmallVectorImpl<SDValue> &InVals) const;
590 createMemcpyOutsideCallSeq(SDValue Arg, SDValue PtrOff,
591 SDValue CallSeqStart, ISD::ArgFlagsTy Flags,
592 SelectionDAG &DAG, DebugLoc dl) const;
595 LowerCall_Darwin(SDValue Chain, SDValue Callee,
596 CallingConv::ID CallConv,
597 bool isVarArg, bool isTailCall,
598 const SmallVectorImpl<ISD::OutputArg> &Outs,
599 const SmallVectorImpl<SDValue> &OutVals,
600 const SmallVectorImpl<ISD::InputArg> &Ins,
601 DebugLoc dl, SelectionDAG &DAG,
602 SmallVectorImpl<SDValue> &InVals) const;
604 LowerCall_64SVR4(SDValue Chain, SDValue Callee,
605 CallingConv::ID CallConv,
606 bool isVarArg, bool isTailCall,
607 const SmallVectorImpl<ISD::OutputArg> &Outs,
608 const SmallVectorImpl<SDValue> &OutVals,
609 const SmallVectorImpl<ISD::InputArg> &Ins,
610 DebugLoc dl, SelectionDAG &DAG,
611 SmallVectorImpl<SDValue> &InVals) const;
613 LowerCall_32SVR4(SDValue Chain, SDValue Callee, CallingConv::ID CallConv,
614 bool isVarArg, bool isTailCall,
615 const SmallVectorImpl<ISD::OutputArg> &Outs,
616 const SmallVectorImpl<SDValue> &OutVals,
617 const SmallVectorImpl<ISD::InputArg> &Ins,
618 DebugLoc dl, SelectionDAG &DAG,
619 SmallVectorImpl<SDValue> &InVals) const;
621 SDValue lowerEH_SJLJ_SETJMP(SDValue Op, SelectionDAG &DAG) const;
622 SDValue lowerEH_SJLJ_LONGJMP(SDValue Op, SelectionDAG &DAG) const;
624 SDValue DAGCombineFastRecip(SDValue Op, DAGCombinerInfo &DCI) const;
625 SDValue DAGCombineFastRecipFSQRT(SDValue Op, DAGCombinerInfo &DCI) const;
629 #endif // LLVM_TARGET_POWERPC_PPC32ISELLOWERING_H