1 //===-- llvm/Target/TargetLowering.h - Target Lowering Info -----*- C++ -*-===//
3 // The LLVM Compiler Infrastructure
5 // This file was developed by the LLVM research group and is distributed under
6 // the University of Illinois Open Source License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
10 // This file describes how to lower LLVM code to machine code. This has two
13 // 1. Which ValueTypes are natively supported by the target.
14 // 2. Which operations are supported for supported ValueTypes.
15 // 3. Cost thresholds for alternative implementations of certain operations.
17 // In addition it has a few other components, like information about FP
20 //===----------------------------------------------------------------------===//
22 #ifndef LLVM_TARGET_TARGETLOWERING_H
23 #define LLVM_TARGET_TARGETLOWERING_H
25 #include "llvm/Type.h"
26 #include "llvm/CodeGen/SelectionDAGNodes.h"
34 class TargetRegisterClass;
38 class MachineBasicBlock;
41 //===----------------------------------------------------------------------===//
42 /// TargetLowering - This class defines information used to lower LLVM code to
43 /// legal SelectionDAG operators that the target instruction selector can accept
46 /// This class also defines callbacks that targets must implement to lower
47 /// target-specific constructs to SelectionDAG operators.
49 class TargetLowering {
51 /// LegalizeAction - This enum indicates whether operations are valid for a
52 /// target, and if not, what action should be used to make them valid.
54 Legal, // The target natively supports this operation.
55 Promote, // This operation should be executed in a larger type.
56 Expand, // Try to expand this to other ops, otherwise use a libcall.
57 Custom // Use the LowerOperation hook to implement custom lowering.
60 enum OutOfRangeShiftAmount {
61 Undefined, // Oversized shift amounts are undefined (default).
62 Mask, // Shift amounts are auto masked (anded) to value size.
63 Extend // Oversized shift pulls in zeros or sign bits.
66 enum SetCCResultValue {
67 UndefinedSetCCResult, // SetCC returns a garbage/unknown extend.
68 ZeroOrOneSetCCResult, // SetCC returns a zero extended result.
69 ZeroOrNegativeOneSetCCResult // SetCC returns a sign extended result.
72 enum SchedPreference {
73 SchedulingForLatency, // Scheduling for shortest total latency.
74 SchedulingForRegPressure // Scheduling for lowest register pressure.
77 TargetLowering(TargetMachine &TM);
78 virtual ~TargetLowering();
80 TargetMachine &getTargetMachine() const { return TM; }
81 const TargetData *getTargetData() const { return TD; }
83 bool isLittleEndian() const { return IsLittleEndian; }
84 MVT::ValueType getPointerTy() const { return PointerTy; }
85 MVT::ValueType getShiftAmountTy() const { return ShiftAmountTy; }
86 OutOfRangeShiftAmount getShiftAmountFlavor() const {return ShiftAmtHandling; }
88 /// usesGlobalOffsetTable - Return true if this target uses a GOT for PIC
90 bool usesGlobalOffsetTable() const { return UsesGlobalOffsetTable; }
92 /// isSetCCExpensive - Return true if the setcc operation is expensive for
94 bool isSetCCExpensive() const { return SetCCIsExpensive; }
96 /// isIntDivCheap() - Return true if integer divide is usually cheaper than
97 /// a sequence of several shifts, adds, and multiplies for this target.
98 bool isIntDivCheap() const { return IntDivIsCheap; }
100 /// isPow2DivCheap() - Return true if pow2 div is cheaper than a chain of
102 bool isPow2DivCheap() const { return Pow2DivIsCheap; }
104 /// getSetCCResultTy - Return the ValueType of the result of setcc operations.
106 MVT::ValueType getSetCCResultTy() const { return SetCCResultTy; }
108 /// getSetCCResultContents - For targets without boolean registers, this flag
109 /// returns information about the contents of the high-bits in the setcc
111 SetCCResultValue getSetCCResultContents() const { return SetCCResultContents;}
113 /// getSchedulingPreference - Return target scheduling preference.
114 SchedPreference getSchedulingPreference() const {
115 return SchedPreferenceInfo;
118 /// getRegClassFor - Return the register class that should be used for the
119 /// specified value type. This may only be called on legal types.
120 TargetRegisterClass *getRegClassFor(MVT::ValueType VT) const {
121 TargetRegisterClass *RC = RegClassForVT[VT];
122 assert(RC && "This value type is not natively supported!");
126 /// isTypeLegal - Return true if the target has native support for the
127 /// specified value type. This means that it has a register that directly
128 /// holds it without promotions or expansions.
129 bool isTypeLegal(MVT::ValueType VT) const {
130 return RegClassForVT[VT] != 0;
133 class ValueTypeActionImpl {
134 /// ValueTypeActions - This is a bitvector that contains two bits for each
135 /// value type, where the two bits correspond to the LegalizeAction enum.
136 /// This can be queried with "getTypeAction(VT)".
137 uint32_t ValueTypeActions[2];
139 ValueTypeActionImpl() {
140 ValueTypeActions[0] = ValueTypeActions[1] = 0;
142 ValueTypeActionImpl(const ValueTypeActionImpl &RHS) {
143 ValueTypeActions[0] = RHS.ValueTypeActions[0];
144 ValueTypeActions[1] = RHS.ValueTypeActions[1];
147 LegalizeAction getTypeAction(MVT::ValueType VT) const {
148 return (LegalizeAction)((ValueTypeActions[VT>>4] >> ((2*VT) & 31)) & 3);
150 void setTypeAction(MVT::ValueType VT, LegalizeAction Action) {
151 assert(unsigned(VT >> 4) <
152 sizeof(ValueTypeActions)/sizeof(ValueTypeActions[0]));
153 ValueTypeActions[VT>>4] |= Action << ((VT*2) & 31);
157 const ValueTypeActionImpl &getValueTypeActions() const {
158 return ValueTypeActions;
161 /// getTypeAction - Return how we should legalize values of this type, either
162 /// it is already legal (return 'Legal') or we need to promote it to a larger
163 /// type (return 'Promote'), or we need to expand it into multiple registers
164 /// of smaller integer type (return 'Expand'). 'Custom' is not an option.
165 LegalizeAction getTypeAction(MVT::ValueType VT) const {
166 return ValueTypeActions.getTypeAction(VT);
169 /// getTypeToTransformTo - For types supported by the target, this is an
170 /// identity function. For types that must be promoted to larger types, this
171 /// returns the larger type to promote to. For types that are larger than the
172 /// largest integer register, this contains one step in the expansion to get
173 /// to the smaller register.
174 MVT::ValueType getTypeToTransformTo(MVT::ValueType VT) const {
175 return TransformToType[VT];
178 /// getPackedTypeBreakdown - Packed types are broken down into some number of
179 /// legal first class types. For example, <8 x float> maps to 2 MVT::v4f32
180 /// with Altivec or SSE1, or 8 promoted MVT::f64 values with the X86 FP stack.
181 /// Similarly, <2 x long> turns into 4 MVT::i32 values with both PPC and X86.
183 /// This method returns the number of registers needed, and the VT for each
184 /// register. It also returns the VT of the PackedType elements before they
185 /// are promoted/expanded.
187 unsigned getPackedTypeBreakdown(const PackedType *PTy,
188 MVT::ValueType &PTyElementVT,
189 MVT::ValueType &PTyLegalElementVT) const;
191 typedef std::vector<double>::const_iterator legal_fpimm_iterator;
192 legal_fpimm_iterator legal_fpimm_begin() const {
193 return LegalFPImmediates.begin();
195 legal_fpimm_iterator legal_fpimm_end() const {
196 return LegalFPImmediates.end();
199 /// isShuffleMaskLegal - Targets can use this to indicate that they only
200 /// support *some* VECTOR_SHUFFLE operations, those with specific masks.
201 /// By default, if a target supports the VECTOR_SHUFFLE node, all mask values
202 /// are assumed to be legal.
203 virtual bool isShuffleMaskLegal(SDOperand Mask, MVT::ValueType VT) const {
207 /// isVectorClearMaskLegal - Similar to isShuffleMaskLegal. This is
208 /// used by Targets can use this to indicate if there is a suitable
209 /// VECTOR_SHUFFLE that can be used to replace a VAND with a constant
211 virtual bool isVectorClearMaskLegal(std::vector<SDOperand> &BVOps,
213 SelectionDAG &DAG) const {
217 /// getOperationAction - Return how this operation should be treated: either
218 /// it is legal, needs to be promoted to a larger size, needs to be
219 /// expanded to some other code sequence, or the target has a custom expander
221 LegalizeAction getOperationAction(unsigned Op, MVT::ValueType VT) const {
222 return (LegalizeAction)((OpActions[Op] >> (2*VT)) & 3);
225 /// isOperationLegal - Return true if the specified operation is legal on this
227 bool isOperationLegal(unsigned Op, MVT::ValueType VT) const {
228 return getOperationAction(Op, VT) == Legal ||
229 getOperationAction(Op, VT) == Custom;
232 /// getLoadXAction - Return how this load with extension should be treated:
233 /// either it is legal, needs to be promoted to a larger size, needs to be
234 /// expanded to some other code sequence, or the target has a custom expander
236 LegalizeAction getLoadXAction(unsigned LType, MVT::ValueType VT) const {
237 return (LegalizeAction)((LoadXActions[LType] >> (2*VT)) & 3);
240 /// isLoadXLegal - Return true if the specified load with extension is legal
242 bool isLoadXLegal(unsigned LType, MVT::ValueType VT) const {
243 return getLoadXAction(LType, VT) == Legal ||
244 getLoadXAction(LType, VT) == Custom;
247 /// getStoreXAction - Return how this store with truncation should be treated:
248 /// either it is legal, needs to be promoted to a larger size, needs to be
249 /// expanded to some other code sequence, or the target has a custom expander
251 LegalizeAction getStoreXAction(MVT::ValueType VT) const {
252 return (LegalizeAction)((StoreXActions >> (2*VT)) & 3);
255 /// isStoreXLegal - Return true if the specified store with truncation is
256 /// legal on this target.
257 bool isStoreXLegal(MVT::ValueType VT) const {
258 return getStoreXAction(VT) == Legal || getStoreXAction(VT) == Custom;
261 /// getTypeToPromoteTo - If the action for this operation is to promote, this
262 /// method returns the ValueType to promote to.
263 MVT::ValueType getTypeToPromoteTo(unsigned Op, MVT::ValueType VT) const {
264 assert(getOperationAction(Op, VT) == Promote &&
265 "This operation isn't promoted!");
267 // See if this has an explicit type specified.
268 std::map<std::pair<unsigned, MVT::ValueType>,
269 MVT::ValueType>::const_iterator PTTI =
270 PromoteToType.find(std::make_pair(Op, VT));
271 if (PTTI != PromoteToType.end()) return PTTI->second;
273 assert((MVT::isInteger(VT) || MVT::isFloatingPoint(VT)) &&
274 "Cannot autopromote this type, add it with AddPromotedToType.");
276 MVT::ValueType NVT = VT;
278 NVT = (MVT::ValueType)(NVT+1);
279 assert(MVT::isInteger(NVT) == MVT::isInteger(VT) && NVT != MVT::isVoid &&
280 "Didn't find type to promote to!");
281 } while (!isTypeLegal(NVT) ||
282 getOperationAction(Op, NVT) == Promote);
286 /// getValueType - Return the MVT::ValueType corresponding to this LLVM type.
287 /// This is fixed by the LLVM operations except for the pointer size.
288 MVT::ValueType getValueType(const Type *Ty) const {
289 switch (Ty->getTypeID()) {
290 default: assert(0 && "Unknown type!");
291 case Type::VoidTyID: return MVT::isVoid;
292 case Type::BoolTyID: return MVT::i1;
293 case Type::UByteTyID:
294 case Type::SByteTyID: return MVT::i8;
295 case Type::ShortTyID:
296 case Type::UShortTyID: return MVT::i16;
298 case Type::UIntTyID: return MVT::i32;
300 case Type::ULongTyID: return MVT::i64;
301 case Type::FloatTyID: return MVT::f32;
302 case Type::DoubleTyID: return MVT::f64;
303 case Type::PointerTyID: return PointerTy;
304 case Type::PackedTyID: return MVT::Vector;
308 /// getNumElements - Return the number of registers that this ValueType will
309 /// eventually require. This is always one for all non-integer types, is
310 /// one for any types promoted to live in larger registers, but may be more
311 /// than one for types (like i64) that are split into pieces.
312 unsigned getNumElements(MVT::ValueType VT) const {
313 return NumElementsForVT[VT];
316 /// hasTargetDAGCombine - If true, the target has custom DAG combine
317 /// transformations that it can perform for the specified node.
318 bool hasTargetDAGCombine(ISD::NodeType NT) const {
319 return TargetDAGCombineArray[NT >> 3] & (1 << (NT&7));
322 /// This function returns the maximum number of store operations permitted
323 /// to replace a call to llvm.memset. The value is set by the target at the
324 /// performance threshold for such a replacement.
325 /// @brief Get maximum # of store operations permitted for llvm.memset
326 unsigned getMaxStoresPerMemset() const { return maxStoresPerMemset; }
328 /// This function returns the maximum number of store operations permitted
329 /// to replace a call to llvm.memcpy. The value is set by the target at the
330 /// performance threshold for such a replacement.
331 /// @brief Get maximum # of store operations permitted for llvm.memcpy
332 unsigned getMaxStoresPerMemcpy() const { return maxStoresPerMemcpy; }
334 /// This function returns the maximum number of store operations permitted
335 /// to replace a call to llvm.memmove. The value is set by the target at the
336 /// performance threshold for such a replacement.
337 /// @brief Get maximum # of store operations permitted for llvm.memmove
338 unsigned getMaxStoresPerMemmove() const { return maxStoresPerMemmove; }
340 /// This function returns true if the target allows unaligned memory accesses.
341 /// This is used, for example, in situations where an array copy/move/set is
342 /// converted to a sequence of store operations. It's use helps to ensure that
343 /// such replacements don't generate code that causes an alignment error
344 /// (trap) on the target machine.
345 /// @brief Determine if the target supports unaligned memory accesses.
346 bool allowsUnalignedMemoryAccesses() const {
347 return allowUnalignedMemoryAccesses;
350 /// usesUnderscoreSetJmpLongJmp - Determine if we should use _setjmp or setjmp
351 /// to implement llvm.setjmp.
352 bool usesUnderscoreSetJmpLongJmp() const {
353 return UseUnderscoreSetJmpLongJmp;
356 /// getStackPointerRegisterToSaveRestore - If a physical register, this
357 /// specifies the register that llvm.savestack/llvm.restorestack should save
359 unsigned getStackPointerRegisterToSaveRestore() const {
360 return StackPointerRegisterToSaveRestore;
363 /// getJumpBufSize - returns the target's jmp_buf size in bytes (if never
364 /// set, the default is 200)
365 unsigned getJumpBufSize() const {
369 /// getJumpBufAlignment - returns the target's jmp_buf alignment in bytes
370 /// (if never set, the default is 0)
371 unsigned getJumpBufAlignment() const {
372 return JumpBufAlignment;
375 /// getPreIndexedAddressParts - returns true by value, base pointer and
376 /// offset pointer and addressing mode by reference if the node's address
377 /// can be legally represented as pre-indexed load / store address.
378 virtual bool getPreIndexedAddressParts(SDNode *N, SDOperand &Base,
380 ISD::MemOpAddrMode &AM,
385 /// getPostIndexedAddressParts - returns true by value, base pointer and
386 /// offset pointer and addressing mode by reference if this node can be
387 /// combined with a load / store to form a post-indexed load / store.
388 virtual bool getPostIndexedAddressParts(SDNode *N, MVT::ValueType VT,
389 SDOperand &Base, SDOperand &Offset,
390 ISD::MemOpAddrMode &AM,
395 //===--------------------------------------------------------------------===//
396 // TargetLowering Optimization Methods
399 /// TargetLoweringOpt - A convenience struct that encapsulates a DAG, and two
400 /// SDOperands for returning information from TargetLowering to its clients
401 /// that want to combine
402 struct TargetLoweringOpt {
407 TargetLoweringOpt(SelectionDAG &InDAG) : DAG(InDAG) {}
409 bool CombineTo(SDOperand O, SDOperand N) {
415 /// ShrinkDemandedConstant - Check to see if the specified operand of the
416 /// specified instruction is a constant integer. If so, check to see if there
417 /// are any bits set in the constant that are not demanded. If so, shrink the
418 /// constant and return true.
419 bool ShrinkDemandedConstant(SDOperand Op, uint64_t Demanded);
422 /// MaskedValueIsZero - Return true if 'Op & Mask' is known to be zero. We
423 /// use this predicate to simplify operations downstream. Op and Mask are
424 /// known to be the same type.
425 bool MaskedValueIsZero(SDOperand Op, uint64_t Mask, unsigned Depth = 0)
428 /// ComputeMaskedBits - Determine which of the bits specified in Mask are
429 /// known to be either zero or one and return them in the KnownZero/KnownOne
430 /// bitsets. This code only analyzes bits in Mask, in order to short-circuit
431 /// processing. Targets can implement the computeMaskedBitsForTargetNode
432 /// method, to allow target nodes to be understood.
433 void ComputeMaskedBits(SDOperand Op, uint64_t Mask, uint64_t &KnownZero,
434 uint64_t &KnownOne, unsigned Depth = 0) const;
436 /// SimplifyDemandedBits - Look at Op. At this point, we know that only the
437 /// DemandedMask bits of the result of Op are ever used downstream. If we can
438 /// use this information to simplify Op, create a new simplified DAG node and
439 /// return true, returning the original and new nodes in Old and New.
440 /// Otherwise, analyze the expression and return a mask of KnownOne and
441 /// KnownZero bits for the expression (used to simplify the caller).
442 /// The KnownZero/One bits may only be accurate for those bits in the
444 bool SimplifyDemandedBits(SDOperand Op, uint64_t DemandedMask,
445 uint64_t &KnownZero, uint64_t &KnownOne,
446 TargetLoweringOpt &TLO, unsigned Depth = 0) const;
448 /// computeMaskedBitsForTargetNode - Determine which of the bits specified in
449 /// Mask are known to be either zero or one and return them in the
450 /// KnownZero/KnownOne bitsets.
451 virtual void computeMaskedBitsForTargetNode(const SDOperand Op,
455 unsigned Depth = 0) const;
457 /// ComputeNumSignBits - Return the number of times the sign bit of the
458 /// register is replicated into the other bits. We know that at least 1 bit
459 /// is always equal to the sign bit (itself), but other cases can give us
460 /// information. For example, immediately after an "SRA X, 2", we know that
461 /// the top 3 bits are all equal to each other, so we return 3.
462 unsigned ComputeNumSignBits(SDOperand Op, unsigned Depth = 0) const;
464 /// ComputeNumSignBitsForTargetNode - This method can be implemented by
465 /// targets that want to expose additional information about sign bits to the
467 virtual unsigned ComputeNumSignBitsForTargetNode(SDOperand Op,
468 unsigned Depth = 0) const;
470 struct DAGCombinerInfo {
471 void *DC; // The DAG Combiner object.
476 DAGCombinerInfo(SelectionDAG &dag, bool bl, void *dc)
477 : DC(dc), BeforeLegalize(bl), DAG(dag) {}
479 bool isBeforeLegalize() const { return BeforeLegalize; }
481 void AddToWorklist(SDNode *N);
482 SDOperand CombineTo(SDNode *N, const std::vector<SDOperand> &To);
483 SDOperand CombineTo(SDNode *N, SDOperand Res);
484 SDOperand CombineTo(SDNode *N, SDOperand Res0, SDOperand Res1);
487 /// PerformDAGCombine - This method will be invoked for all target nodes and
488 /// for any target-independent nodes that the target has registered with
491 /// The semantics are as follows:
493 /// SDOperand.Val == 0 - No change was made
494 /// SDOperand.Val == N - N was replaced, is dead, and is already handled.
495 /// otherwise - N should be replaced by the returned Operand.
497 /// In addition, methods provided by DAGCombinerInfo may be used to perform
498 /// more complex transformations.
500 virtual SDOperand PerformDAGCombine(SDNode *N, DAGCombinerInfo &DCI) const;
502 //===--------------------------------------------------------------------===//
503 // TargetLowering Configuration Methods - These methods should be invoked by
504 // the derived class constructor to configure this object for the target.
508 /// setUsesGlobalOffsetTable - Specify that this target does or doesn't use a
509 /// GOT for PC-relative code.
510 void setUsesGlobalOffsetTable(bool V) { UsesGlobalOffsetTable = V; }
512 /// setShiftAmountType - Describe the type that should be used for shift
513 /// amounts. This type defaults to the pointer type.
514 void setShiftAmountType(MVT::ValueType VT) { ShiftAmountTy = VT; }
516 /// setSetCCResultType - Describe the type that shoudl be used as the result
517 /// of a setcc operation. This defaults to the pointer type.
518 void setSetCCResultType(MVT::ValueType VT) { SetCCResultTy = VT; }
520 /// setSetCCResultContents - Specify how the target extends the result of a
521 /// setcc operation in a register.
522 void setSetCCResultContents(SetCCResultValue Ty) { SetCCResultContents = Ty; }
524 /// setSchedulingPreference - Specify the target scheduling preference.
525 void setSchedulingPreference(SchedPreference Pref) {
526 SchedPreferenceInfo = Pref;
529 /// setShiftAmountFlavor - Describe how the target handles out of range shift
531 void setShiftAmountFlavor(OutOfRangeShiftAmount OORSA) {
532 ShiftAmtHandling = OORSA;
535 /// setUseUnderscoreSetJmpLongJmp - Indicate whether this target prefers to
536 /// use _setjmp and _longjmp to or implement llvm.setjmp/llvm.longjmp or
537 /// the non _ versions. Defaults to false.
538 void setUseUnderscoreSetJmpLongJmp(bool Val) {
539 UseUnderscoreSetJmpLongJmp = Val;
542 /// setStackPointerRegisterToSaveRestore - If set to a physical register, this
543 /// specifies the register that llvm.savestack/llvm.restorestack should save
545 void setStackPointerRegisterToSaveRestore(unsigned R) {
546 StackPointerRegisterToSaveRestore = R;
549 /// setSetCCIxExpensive - This is a short term hack for targets that codegen
550 /// setcc as a conditional branch. This encourages the code generator to fold
551 /// setcc operations into other operations if possible.
552 void setSetCCIsExpensive() { SetCCIsExpensive = true; }
554 /// setIntDivIsCheap - Tells the code generator that integer divide is
555 /// expensive, and if possible, should be replaced by an alternate sequence
556 /// of instructions not containing an integer divide.
557 void setIntDivIsCheap(bool isCheap = true) { IntDivIsCheap = isCheap; }
559 /// setPow2DivIsCheap - Tells the code generator that it shouldn't generate
560 /// srl/add/sra for a signed divide by power of two, and let the target handle
562 void setPow2DivIsCheap(bool isCheap = true) { Pow2DivIsCheap = isCheap; }
564 /// addRegisterClass - Add the specified register class as an available
565 /// regclass for the specified value type. This indicates the selector can
566 /// handle values of that class natively.
567 void addRegisterClass(MVT::ValueType VT, TargetRegisterClass *RC) {
568 AvailableRegClasses.push_back(std::make_pair(VT, RC));
569 RegClassForVT[VT] = RC;
572 /// computeRegisterProperties - Once all of the register classes are added,
573 /// this allows us to compute derived properties we expose.
574 void computeRegisterProperties();
576 /// setOperationAction - Indicate that the specified operation does not work
577 /// with the specified type and indicate what to do about it.
578 void setOperationAction(unsigned Op, MVT::ValueType VT,
579 LegalizeAction Action) {
580 assert(VT < 32 && Op < sizeof(OpActions)/sizeof(OpActions[0]) &&
581 "Table isn't big enough!");
582 OpActions[Op] &= ~(uint64_t(3UL) << VT*2);
583 OpActions[Op] |= (uint64_t)Action << VT*2;
586 /// setLoadXAction - Indicate that the specified load with extension does not
587 /// work with the with specified type and indicate what to do about it.
588 void setLoadXAction(unsigned ExtType, MVT::ValueType VT,
589 LegalizeAction Action) {
590 assert(VT < 32 && ExtType < sizeof(LoadXActions)/sizeof(LoadXActions[0]) &&
591 "Table isn't big enough!");
592 LoadXActions[ExtType] &= ~(uint64_t(3UL) << VT*2);
593 LoadXActions[ExtType] |= (uint64_t)Action << VT*2;
596 /// setStoreXAction - Indicate that the specified store with truncation does
597 /// not work with the with specified type and indicate what to do about it.
598 void setStoreXAction(MVT::ValueType VT, LegalizeAction Action) {
599 assert(VT < 32 && "Table isn't big enough!");
600 StoreXActions &= ~(uint64_t(3UL) << VT*2);
601 StoreXActions |= (uint64_t)Action << VT*2;
604 /// AddPromotedToType - If Opc/OrigVT is specified as being promoted, the
605 /// promotion code defaults to trying a larger integer/fp until it can find
606 /// one that works. If that default is insufficient, this method can be used
607 /// by the target to override the default.
608 void AddPromotedToType(unsigned Opc, MVT::ValueType OrigVT,
609 MVT::ValueType DestVT) {
610 PromoteToType[std::make_pair(Opc, OrigVT)] = DestVT;
613 /// addLegalFPImmediate - Indicate that this target can instruction select
614 /// the specified FP immediate natively.
615 void addLegalFPImmediate(double Imm) {
616 LegalFPImmediates.push_back(Imm);
619 /// setTargetDAGCombine - Targets should invoke this method for each target
620 /// independent node that they want to provide a custom DAG combiner for by
621 /// implementing the PerformDAGCombine virtual method.
622 void setTargetDAGCombine(ISD::NodeType NT) {
623 TargetDAGCombineArray[NT >> 3] |= 1 << (NT&7);
626 /// setJumpBufSize - Set the target's required jmp_buf buffer size (in
627 /// bytes); default is 200
628 void setJumpBufSize(unsigned Size) {
632 /// setJumpBufAlignment - Set the target's required jmp_buf buffer
633 /// alignment (in bytes); default is 0
634 void setJumpBufAlignment(unsigned Align) {
635 JumpBufAlignment = Align;
640 //===--------------------------------------------------------------------===//
641 // Lowering methods - These methods must be implemented by targets so that
642 // the SelectionDAGLowering code knows how to lower these.
645 /// LowerArguments - This hook must be implemented to indicate how we should
646 /// lower the arguments for the specified function, into the specified DAG.
647 virtual std::vector<SDOperand>
648 LowerArguments(Function &F, SelectionDAG &DAG);
650 /// LowerCallTo - This hook lowers an abstract call to a function into an
651 /// actual call. This returns a pair of operands. The first element is the
652 /// return value for the function (if RetTy is not VoidTy). The second
653 /// element is the outgoing token chain.
654 typedef std::vector<std::pair<SDOperand, const Type*> > ArgListTy;
655 virtual std::pair<SDOperand, SDOperand>
656 LowerCallTo(SDOperand Chain, const Type *RetTy, bool isVarArg,
657 unsigned CallingConv, bool isTailCall, SDOperand Callee,
658 ArgListTy &Args, SelectionDAG &DAG);
660 /// LowerFrameReturnAddress - This hook lowers a call to llvm.returnaddress or
661 /// llvm.frameaddress (depending on the value of the first argument). The
662 /// return values are the result pointer and the resultant token chain. If
663 /// not implemented, both of these intrinsics will return null.
664 virtual std::pair<SDOperand, SDOperand>
665 LowerFrameReturnAddress(bool isFrameAddr, SDOperand Chain, unsigned Depth,
668 /// LowerOperation - This callback is invoked for operations that are
669 /// unsupported by the target, which are registered to use 'custom' lowering,
670 /// and whose defined values are all legal.
671 /// If the target has no operations that require custom lowering, it need not
672 /// implement this. The default implementation of this aborts.
673 virtual SDOperand LowerOperation(SDOperand Op, SelectionDAG &DAG);
675 /// CustomPromoteOperation - This callback is invoked for operations that are
676 /// unsupported by the target, are registered to use 'custom' lowering, and
677 /// whose type needs to be promoted.
678 virtual SDOperand CustomPromoteOperation(SDOperand Op, SelectionDAG &DAG);
680 /// getTargetNodeName() - This method returns the name of a target specific
682 virtual const char *getTargetNodeName(unsigned Opcode) const;
684 //===--------------------------------------------------------------------===//
685 // Inline Asm Support hooks
688 enum ConstraintType {
689 C_Register, // Constraint represents a single register.
690 C_RegisterClass, // Constraint represents one or more registers.
691 C_Memory, // Memory constraint.
692 C_Other, // Something else.
693 C_Unknown // Unsupported constraint.
696 /// getConstraintType - Given a constraint letter, return the type of
697 /// constraint it is for this target.
698 virtual ConstraintType getConstraintType(char ConstraintLetter) const;
701 /// getRegClassForInlineAsmConstraint - Given a constraint letter (e.g. "r"),
702 /// return a list of registers that can be used to satisfy the constraint.
703 /// This should only be used for C_RegisterClass constraints.
704 virtual std::vector<unsigned>
705 getRegClassForInlineAsmConstraint(const std::string &Constraint,
706 MVT::ValueType VT) const;
708 /// getRegForInlineAsmConstraint - Given a physical register constraint (e.g.
709 /// {edx}), return the register number and the register class for the
712 /// Given a register class constraint, like 'r', if this corresponds directly
713 /// to an LLVM register class, return a register of 0 and the register class
716 /// This should only be used for C_Register constraints. On error,
717 /// this returns a register number of 0 and a null register class pointer..
718 virtual std::pair<unsigned, const TargetRegisterClass*>
719 getRegForInlineAsmConstraint(const std::string &Constraint,
720 MVT::ValueType VT) const;
723 /// isOperandValidForConstraint - Return the specified operand (possibly
724 /// modified) if the specified SDOperand is valid for the specified target
725 /// constraint letter, otherwise return null.
727 isOperandValidForConstraint(SDOperand Op, char ConstraintLetter,
730 //===--------------------------------------------------------------------===//
734 // InsertAtEndOfBasicBlock - This method should be implemented by targets that
735 // mark instructions with the 'usesCustomDAGSchedInserter' flag. These
736 // instructions are special in various ways, which require special support to
737 // insert. The specified MachineInstr is created but not inserted into any
738 // basic blocks, and the scheduler passes ownership of it to this method.
739 virtual MachineBasicBlock *InsertAtEndOfBasicBlock(MachineInstr *MI,
740 MachineBasicBlock *MBB);
742 //===--------------------------------------------------------------------===//
743 // Loop Strength Reduction hooks
746 /// isLegalAddressImmediate - Return true if the integer value or GlobalValue
747 /// can be used as the offset of the target addressing mode.
748 virtual bool isLegalAddressImmediate(int64_t V) const;
749 virtual bool isLegalAddressImmediate(GlobalValue *GV) const;
751 typedef std::vector<unsigned>::const_iterator legal_am_scale_iterator;
752 legal_am_scale_iterator legal_am_scale_begin() const {
753 return LegalAddressScales.begin();
755 legal_am_scale_iterator legal_am_scale_end() const {
756 return LegalAddressScales.end();
759 //===--------------------------------------------------------------------===//
760 // Div utility functions
762 SDOperand BuildSDIV(SDNode *N, SelectionDAG &DAG,
763 std::vector<SDNode*>* Created) const;
764 SDOperand BuildUDIV(SDNode *N, SelectionDAG &DAG,
765 std::vector<SDNode*>* Created) const;
769 /// addLegalAddressScale - Add a integer (> 1) value which can be used as
770 /// scale in the target addressing mode. Note: the ordering matters so the
771 /// least efficient ones should be entered first.
772 void addLegalAddressScale(unsigned Scale) {
773 LegalAddressScales.push_back(Scale);
777 std::vector<unsigned> LegalAddressScales;
780 const TargetData *TD;
782 /// IsLittleEndian - True if this is a little endian target.
786 /// PointerTy - The type to use for pointers, usually i32 or i64.
788 MVT::ValueType PointerTy;
790 /// UsesGlobalOffsetTable - True if this target uses a GOT for PIC codegen.
792 bool UsesGlobalOffsetTable;
794 /// ShiftAmountTy - The type to use for shift amounts, usually i8 or whatever
796 MVT::ValueType ShiftAmountTy;
798 OutOfRangeShiftAmount ShiftAmtHandling;
800 /// SetCCIsExpensive - This is a short term hack for targets that codegen
801 /// setcc as a conditional branch. This encourages the code generator to fold
802 /// setcc operations into other operations if possible.
803 bool SetCCIsExpensive;
805 /// IntDivIsCheap - Tells the code generator not to expand integer divides by
806 /// constants into a sequence of muls, adds, and shifts. This is a hack until
807 /// a real cost model is in place. If we ever optimize for size, this will be
808 /// set to true unconditionally.
811 /// Pow2DivIsCheap - Tells the code generator that it shouldn't generate
812 /// srl/add/sra for a signed divide by power of two, and let the target handle
816 /// SetCCResultTy - The type that SetCC operations use. This defaults to the
818 MVT::ValueType SetCCResultTy;
820 /// SetCCResultContents - Information about the contents of the high-bits in
821 /// the result of a setcc comparison operation.
822 SetCCResultValue SetCCResultContents;
824 /// SchedPreferenceInfo - The target scheduling preference: shortest possible
825 /// total cycles or lowest register usage.
826 SchedPreference SchedPreferenceInfo;
828 /// UseUnderscoreSetJmpLongJmp - This target prefers to use _setjmp and
829 /// _longjmp to implement llvm.setjmp/llvm.longjmp. Defaults to false.
830 bool UseUnderscoreSetJmpLongJmp;
832 /// JumpBufSize - The size, in bytes, of the target's jmp_buf buffers
833 unsigned JumpBufSize;
835 /// JumpBufAlignment - The alignment, in bytes, of the target's jmp_buf
837 unsigned JumpBufAlignment;
839 /// StackPointerRegisterToSaveRestore - If set to a physical register, this
840 /// specifies the register that llvm.savestack/llvm.restorestack should save
842 unsigned StackPointerRegisterToSaveRestore;
844 /// RegClassForVT - This indicates the default register class to use for
845 /// each ValueType the target supports natively.
846 TargetRegisterClass *RegClassForVT[MVT::LAST_VALUETYPE];
847 unsigned char NumElementsForVT[MVT::LAST_VALUETYPE];
849 /// TransformToType - For any value types we are promoting or expanding, this
850 /// contains the value type that we are changing to. For Expanded types, this
851 /// contains one step of the expand (e.g. i64 -> i32), even if there are
852 /// multiple steps required (e.g. i64 -> i16). For types natively supported
853 /// by the system, this holds the same type (e.g. i32 -> i32).
854 MVT::ValueType TransformToType[MVT::LAST_VALUETYPE];
856 /// OpActions - For each operation and each value type, keep a LegalizeAction
857 /// that indicates how instruction selection should deal with the operation.
858 /// Most operations are Legal (aka, supported natively by the target), but
859 /// operations that are not should be described. Note that operations on
860 /// non-legal value types are not described here.
861 uint64_t OpActions[156];
863 /// LoadXActions - For each load of load extension type and each value type,
864 /// keep a LegalizeAction that indicates how instruction selection should deal
866 uint64_t LoadXActions[ISD::LAST_LOADX_TYPE];
868 /// StoreXActions - For each store with truncation of each value type, keep a
869 /// LegalizeAction that indicates how instruction selection should deal with
871 uint64_t StoreXActions;
873 ValueTypeActionImpl ValueTypeActions;
875 std::vector<double> LegalFPImmediates;
877 std::vector<std::pair<MVT::ValueType,
878 TargetRegisterClass*> > AvailableRegClasses;
880 /// TargetDAGCombineArray - Targets can specify ISD nodes that they would
881 /// like PerformDAGCombine callbacks for by calling setTargetDAGCombine(),
882 /// which sets a bit in this array.
883 unsigned char TargetDAGCombineArray[156/(sizeof(unsigned char)*8)];
885 /// PromoteToType - For operations that must be promoted to a specific type,
886 /// this holds the destination type. This map should be sparse, so don't hold
889 /// Targets add entries to this map with AddPromotedToType(..), clients access
890 /// this with getTypeToPromoteTo(..).
891 std::map<std::pair<unsigned, MVT::ValueType>, MVT::ValueType> PromoteToType;
894 /// When lowering %llvm.memset this field specifies the maximum number of
895 /// store operations that may be substituted for the call to memset. Targets
896 /// must set this value based on the cost threshold for that target. Targets
897 /// should assume that the memset will be done using as many of the largest
898 /// store operations first, followed by smaller ones, if necessary, per
899 /// alignment restrictions. For example, storing 9 bytes on a 32-bit machine
900 /// with 16-bit alignment would result in four 2-byte stores and one 1-byte
901 /// store. This only applies to setting a constant array of a constant size.
902 /// @brief Specify maximum number of store instructions per memset call.
903 unsigned maxStoresPerMemset;
905 /// When lowering %llvm.memcpy this field specifies the maximum number of
906 /// store operations that may be substituted for a call to memcpy. Targets
907 /// must set this value based on the cost threshold for that target. Targets
908 /// should assume that the memcpy will be done using as many of the largest
909 /// store operations first, followed by smaller ones, if necessary, per
910 /// alignment restrictions. For example, storing 7 bytes on a 32-bit machine
911 /// with 32-bit alignment would result in one 4-byte store, a one 2-byte store
912 /// and one 1-byte store. This only applies to copying a constant array of
914 /// @brief Specify maximum bytes of store instructions per memcpy call.
915 unsigned maxStoresPerMemcpy;
917 /// When lowering %llvm.memmove this field specifies the maximum number of
918 /// store instructions that may be substituted for a call to memmove. Targets
919 /// must set this value based on the cost threshold for that target. Targets
920 /// should assume that the memmove will be done using as many of the largest
921 /// store operations first, followed by smaller ones, if necessary, per
922 /// alignment restrictions. For example, moving 9 bytes on a 32-bit machine
923 /// with 8-bit alignment would result in nine 1-byte stores. This only
924 /// applies to copying a constant array of constant size.
925 /// @brief Specify maximum bytes of store instructions per memmove call.
926 unsigned maxStoresPerMemmove;
928 /// This field specifies whether the target machine permits unaligned memory
929 /// accesses. This is used, for example, to determine the size of store
930 /// operations when copying small arrays and other similar tasks.
931 /// @brief Indicate whether the target permits unaligned memory accesses.
932 bool allowUnalignedMemoryAccesses;
934 } // end llvm namespace