1 //===-- llvm/CodeGen/SelectionDAGNodes.h - SelectionDAG Nodes ---*- C++ -*-===//
3 // The LLVM Compiler Infrastructure
5 // This file is distributed under the University of Illinois Open Source
6 // License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
10 // This file declares the SDNode class and derived classes, which are used to
11 // represent the nodes and operations present in a SelectionDAG. These nodes
12 // and operations are machine code level operations, with some similarities to
13 // the GCC RTL representation.
15 // Clients should include the SelectionDAG.h file instead of this file directly.
17 //===----------------------------------------------------------------------===//
19 #ifndef LLVM_CODEGEN_SELECTIONDAGNODES_H
20 #define LLVM_CODEGEN_SELECTIONDAGNODES_H
22 #include "llvm/Constants.h"
23 #include "llvm/ADT/FoldingSet.h"
24 #include "llvm/ADT/GraphTraits.h"
25 #include "llvm/ADT/ilist_node.h"
26 #include "llvm/ADT/SmallVector.h"
27 #include "llvm/ADT/STLExtras.h"
28 #include "llvm/CodeGen/ValueTypes.h"
29 #include "llvm/CodeGen/MachineMemOperand.h"
30 #include "llvm/Support/MathExtras.h"
31 #include "llvm/System/DataTypes.h"
32 #include "llvm/Support/DebugLoc.h"
39 class MachineBasicBlock;
40 class MachineConstantPoolValue;
43 template <typename T> struct DenseMapInfo;
44 template <typename T> struct simplify_type;
45 template <typename T> struct ilist_traits;
47 /// SDVTList - This represents a list of ValueType's that has been intern'd by
48 /// a SelectionDAG. Instances of this simple value class are returned by
49 /// SelectionDAG::getVTList(...).
56 /// ISD namespace - This namespace contains an enum which represents all of the
57 /// SelectionDAG node types and value types.
61 //===--------------------------------------------------------------------===//
62 /// ISD::NodeType enum - This enum defines the target-independent operators
63 /// for a SelectionDAG.
65 /// Targets may also define target-dependent operator codes for SDNodes. For
66 /// example, on x86, these are the enum values in the X86ISD namespace.
67 /// Targets should aim to use target-independent operators to model their
68 /// instruction sets as much as possible, and only use target-dependent
69 /// operators when they have special requirements.
71 /// Finally, during and after selection proper, SNodes may use special
72 /// operator codes that correspond directly with MachineInstr opcodes. These
73 /// are used to represent selected instructions. See the isMachineOpcode()
74 /// and getMachineOpcode() member functions of SDNode.
77 // DELETED_NODE - This is an illegal value that is used to catch
78 // errors. This opcode is not a legal opcode for any node.
81 // EntryToken - This is the marker used to indicate the start of the region.
84 // TokenFactor - This node takes multiple tokens as input and produces a
85 // single token result. This is used to represent the fact that the operand
86 // operators are independent of each other.
89 // AssertSext, AssertZext - These nodes record if a register contains a
90 // value that has already been zero or sign extended from a narrower type.
91 // These nodes take two operands. The first is the node that has already
92 // been extended, and the second is a value type node indicating the width
94 AssertSext, AssertZext,
96 // Various leaf nodes.
97 BasicBlock, VALUETYPE, CONDCODE, Register,
99 GlobalAddress, GlobalTLSAddress, FrameIndex,
100 JumpTable, ConstantPool, ExternalSymbol, BlockAddress,
102 // The address of the GOT
105 // FRAMEADDR, RETURNADDR - These nodes represent llvm.frameaddress and
106 // llvm.returnaddress on the DAG. These nodes take one operand, the index
107 // of the frame or return address to return. An index of zero corresponds
108 // to the current function's frame or return address, an index of one to the
109 // parent's frame or return address, and so on.
110 FRAMEADDR, RETURNADDR,
112 // FRAME_TO_ARGS_OFFSET - This node represents offset from frame pointer to
113 // first (possible) on-stack argument. This is needed for correct stack
114 // adjustment during unwind.
115 FRAME_TO_ARGS_OFFSET,
117 // RESULT, OUTCHAIN = EXCEPTIONADDR(INCHAIN) - This node represents the
118 // address of the exception block on entry to an landing pad block.
121 // RESULT, OUTCHAIN = LSDAADDR(INCHAIN) - This node represents the
122 // address of the Language Specific Data Area for the enclosing function.
125 // RESULT, OUTCHAIN = EHSELECTION(INCHAIN, EXCEPTION) - This node represents
126 // the selection index of the exception thrown.
129 // OUTCHAIN = EH_RETURN(INCHAIN, OFFSET, HANDLER) - This node represents
130 // 'eh_return' gcc dwarf builtin, which is used to return from
131 // exception. The general meaning is: adjust stack by OFFSET and pass
132 // execution to HANDLER. Many platform-related details also :)
135 // TargetConstant* - Like Constant*, but the DAG does not do any folding or
136 // simplification of the constant.
140 // TargetGlobalAddress - Like GlobalAddress, but the DAG does no folding or
141 // anything else with this node, and this is valid in the target-specific
142 // dag, turning into a GlobalAddress operand.
144 TargetGlobalTLSAddress,
148 TargetExternalSymbol,
151 /// RESULT = INTRINSIC_WO_CHAIN(INTRINSICID, arg1, arg2, ...)
152 /// This node represents a target intrinsic function with no side effects.
153 /// The first operand is the ID number of the intrinsic from the
154 /// llvm::Intrinsic namespace. The operands to the intrinsic follow. The
155 /// node has returns the result of the intrinsic.
158 /// RESULT,OUTCHAIN = INTRINSIC_W_CHAIN(INCHAIN, INTRINSICID, arg1, ...)
159 /// This node represents a target intrinsic function with side effects that
160 /// returns a result. The first operand is a chain pointer. The second is
161 /// the ID number of the intrinsic from the llvm::Intrinsic namespace. The
162 /// operands to the intrinsic follow. The node has two results, the result
163 /// of the intrinsic and an output chain.
166 /// OUTCHAIN = INTRINSIC_VOID(INCHAIN, INTRINSICID, arg1, arg2, ...)
167 /// This node represents a target intrinsic function with side effects that
168 /// does not return a result. The first operand is a chain pointer. The
169 /// second is the ID number of the intrinsic from the llvm::Intrinsic
170 /// namespace. The operands to the intrinsic follow.
173 // CopyToReg - This node has three operands: a chain, a register number to
174 // set to this value, and a value.
177 // CopyFromReg - This node indicates that the input value is a virtual or
178 // physical register that is defined outside of the scope of this
179 // SelectionDAG. The register is available from the RegisterSDNode object.
182 // UNDEF - An undefined node
185 // EXTRACT_ELEMENT - This is used to get the lower or upper (determined by
186 // a Constant, which is required to be operand #1) half of the integer or
187 // float value specified as operand #0. This is only for use before
188 // legalization, for values that will be broken into multiple registers.
191 // BUILD_PAIR - This is the opposite of EXTRACT_ELEMENT in some ways. Given
192 // two values of the same integer value type, this produces a value twice as
193 // big. Like EXTRACT_ELEMENT, this can only be used before legalization.
196 // MERGE_VALUES - This node takes multiple discrete operands and returns
197 // them all as its individual results. This nodes has exactly the same
198 // number of inputs and outputs. This node is useful for some pieces of the
199 // code generator that want to think about a single node with multiple
200 // results, not multiple nodes.
203 // Simple integer binary arithmetic operators.
204 ADD, SUB, MUL, SDIV, UDIV, SREM, UREM,
206 // SMUL_LOHI/UMUL_LOHI - Multiply two integers of type iN, producing
207 // a signed/unsigned value of type i[2*N], and return the full value as
208 // two results, each of type iN.
209 SMUL_LOHI, UMUL_LOHI,
211 // SDIVREM/UDIVREM - Divide two integers and produce both a quotient and
215 // CARRY_FALSE - This node is used when folding other nodes,
216 // like ADDC/SUBC, which indicate the carry result is always false.
219 // Carry-setting nodes for multiple precision addition and subtraction.
220 // These nodes take two operands of the same value type, and produce two
221 // results. The first result is the normal add or sub result, the second
222 // result is the carry flag result.
225 // Carry-using nodes for multiple precision addition and subtraction. These
226 // nodes take three operands: The first two are the normal lhs and rhs to
227 // the add or sub, and the third is the input carry flag. These nodes
228 // produce two results; the normal result of the add or sub, and the output
229 // carry flag. These nodes both read and write a carry flag to allow them
230 // to them to be chained together for add and sub of arbitrarily large
234 // RESULT, BOOL = [SU]ADDO(LHS, RHS) - Overflow-aware nodes for addition.
235 // These nodes take two operands: the normal LHS and RHS to the add. They
236 // produce two results: the normal result of the add, and a boolean that
237 // indicates if an overflow occured (*not* a flag, because it may be stored
238 // to memory, etc.). If the type of the boolean is not i1 then the high
239 // bits conform to getBooleanContents.
240 // These nodes are generated from the llvm.[su]add.with.overflow intrinsics.
243 // Same for subtraction
246 // Same for multiplication
249 // Simple binary floating point operators.
250 FADD, FSUB, FMUL, FDIV, FREM,
252 // FCOPYSIGN(X, Y) - Return the value of X with the sign of Y. NOTE: This
253 // DAG node does not require that X and Y have the same type, just that they
254 // are both floating point. X and the result must have the same type.
255 // FCOPYSIGN(f32, f64) is allowed.
258 // INT = FGETSIGN(FP) - Return the sign bit of the specified floating point
259 // value as an integer 0/1 value.
262 /// BUILD_VECTOR(ELT0, ELT1, ELT2, ELT3,...) - Return a vector with the
263 /// specified, possibly variable, elements. The number of elements is
264 /// required to be a power of two. The types of the operands must all be
265 /// the same and must match the vector element type, except that integer
266 /// types are allowed to be larger than the element type, in which case
267 /// the operands are implicitly truncated.
270 /// INSERT_VECTOR_ELT(VECTOR, VAL, IDX) - Returns VECTOR with the element
271 /// at IDX replaced with VAL. If the type of VAL is larger than the vector
272 /// element type then VAL is truncated before replacement.
275 /// EXTRACT_VECTOR_ELT(VECTOR, IDX) - Returns a single element from VECTOR
276 /// identified by the (potentially variable) element number IDX. If the
277 /// return type is an integer type larger than the element type of the
278 /// vector, the result is extended to the width of the return type.
281 /// CONCAT_VECTORS(VECTOR0, VECTOR1, ...) - Given a number of values of
282 /// vector type with the same length and element type, this produces a
283 /// concatenated vector result value, with length equal to the sum of the
284 /// lengths of the input vectors.
287 /// EXTRACT_SUBVECTOR(VECTOR, IDX) - Returns a subvector from VECTOR (an
288 /// vector value) starting with the (potentially variable) element number
289 /// IDX, which must be a multiple of the result vector length.
292 /// VECTOR_SHUFFLE(VEC1, VEC2) - Returns a vector, of the same type as
293 /// VEC1/VEC2. A VECTOR_SHUFFLE node also contains an array of constant int
294 /// values that indicate which value (or undef) each result element will
295 /// get. These constant ints are accessible through the
296 /// ShuffleVectorSDNode class. This is quite similar to the Altivec
297 /// 'vperm' instruction, except that the indices must be constants and are
298 /// in terms of the element size of VEC1/VEC2, not in terms of bytes.
301 /// SCALAR_TO_VECTOR(VAL) - This represents the operation of loading a
302 /// scalar value into element 0 of the resultant vector type. The top
303 /// elements 1 to N-1 of the N-element vector are undefined. The type
304 /// of the operand must match the vector element type, except when they
305 /// are integer types. In this case the operand is allowed to be wider
306 /// than the vector element type, and is implicitly truncated to it.
309 // MULHU/MULHS - Multiply high - Multiply two integers of type iN, producing
310 // an unsigned/signed value of type i[2*N], then return the top part.
313 // Bitwise operators - logical and, logical or, logical xor, shift left,
314 // shift right algebraic (shift in sign bits), shift right logical (shift in
315 // zeroes), rotate left, rotate right, and byteswap.
316 AND, OR, XOR, SHL, SRA, SRL, ROTL, ROTR, BSWAP,
318 // Counting operators
321 // Select(COND, TRUEVAL, FALSEVAL). If the type of the boolean COND is not
322 // i1 then the high bits must conform to getBooleanContents.
325 // Select with condition operator - This selects between a true value and
326 // a false value (ops #2 and #3) based on the boolean result of comparing
327 // the lhs and rhs (ops #0 and #1) of a conditional expression with the
328 // condition code in op #4, a CondCodeSDNode.
331 // SetCC operator - This evaluates to a true value iff the condition is
332 // true. If the result value type is not i1 then the high bits conform
333 // to getBooleanContents. The operands to this are the left and right
334 // operands to compare (ops #0, and #1) and the condition code to compare
335 // them with (op #2) as a CondCodeSDNode.
338 // RESULT = VSETCC(LHS, RHS, COND) operator - This evaluates to a vector of
339 // integer elements with all bits of the result elements set to true if the
340 // comparison is true or all cleared if the comparison is false. The
341 // operands to this are the left and right operands to compare (LHS/RHS) and
342 // the condition code to compare them with (COND) as a CondCodeSDNode.
345 // SHL_PARTS/SRA_PARTS/SRL_PARTS - These operators are used for expanded
346 // integer shift operations, just like ADD/SUB_PARTS. The operation
348 // [Lo,Hi] = op [LoLHS,HiLHS], Amt
349 SHL_PARTS, SRA_PARTS, SRL_PARTS,
351 // Conversion operators. These are all single input single output
352 // operations. For all of these, the result type must be strictly
353 // wider or narrower (depending on the operation) than the source
356 // SIGN_EXTEND - Used for integer types, replicating the sign bit
360 // ZERO_EXTEND - Used for integer types, zeroing the new bits.
363 // ANY_EXTEND - Used for integer types. The high bits are undefined.
366 // TRUNCATE - Completely drop the high bits.
369 // [SU]INT_TO_FP - These operators convert integers (whose interpreted sign
370 // depends on the first letter) to floating point.
374 // SIGN_EXTEND_INREG - This operator atomically performs a SHL/SRA pair to
375 // sign extend a small value in a large integer register (e.g. sign
376 // extending the low 8 bits of a 32-bit register to fill the top 24 bits
377 // with the 7th bit). The size of the smaller type is indicated by the 1th
378 // operand, a ValueType node.
381 /// FP_TO_[US]INT - Convert a floating point value to a signed or unsigned
386 /// X = FP_ROUND(Y, TRUNC) - Rounding 'Y' from a larger floating point type
387 /// down to the precision of the destination VT. TRUNC is a flag, which is
388 /// always an integer that is zero or one. If TRUNC is 0, this is a
389 /// normal rounding, if it is 1, this FP_ROUND is known to not change the
392 /// The TRUNC = 1 case is used in cases where we know that the value will
393 /// not be modified by the node, because Y is not using any of the extra
394 /// precision of source type. This allows certain transformations like
395 /// FP_EXTEND(FP_ROUND(X,1)) -> X which are not safe for
396 /// FP_EXTEND(FP_ROUND(X,0)) because the extra bits aren't removed.
399 // FLT_ROUNDS_ - Returns current rounding mode:
402 // 1 Round to nearest
407 /// X = FP_ROUND_INREG(Y, VT) - This operator takes an FP register, and
408 /// rounds it to a floating point value. It then promotes it and returns it
409 /// in a register of the same size. This operation effectively just
410 /// discards excess precision. The type to round down to is specified by
411 /// the VT operand, a VTSDNode.
414 /// X = FP_EXTEND(Y) - Extend a smaller FP type into a larger FP type.
417 // BIT_CONVERT - This operator converts between integer, vector and FP
418 // values, as if the value was stored to memory with one type and loaded
419 // from the same address with the other type (or equivalently for vector
420 // format conversions, etc). The source and result are required to have
421 // the same bit size (e.g. f32 <-> i32). This can also be used for
422 // int-to-int or fp-to-fp conversions, but that is a noop, deleted by
426 // CONVERT_RNDSAT - This operator is used to support various conversions
427 // between various types (float, signed, unsigned and vectors of those
428 // types) with rounding and saturation. NOTE: Avoid using this operator as
429 // most target don't support it and the operator might be removed in the
430 // future. It takes the following arguments:
432 // 1) dest type (type to convert to)
433 // 2) src type (type to convert from)
436 // 5) ISD::CvtCode indicating the type of conversion to do
439 // FNEG, FABS, FSQRT, FSIN, FCOS, FPOWI, FPOW,
440 // FLOG, FLOG2, FLOG10, FEXP, FEXP2,
441 // FCEIL, FTRUNC, FRINT, FNEARBYINT, FFLOOR - Perform various unary floating
442 // point operations. These are inspired by libm.
443 FNEG, FABS, FSQRT, FSIN, FCOS, FPOWI, FPOW,
444 FLOG, FLOG2, FLOG10, FEXP, FEXP2,
445 FCEIL, FTRUNC, FRINT, FNEARBYINT, FFLOOR,
447 // LOAD and STORE have token chains as their first operand, then the same
448 // operands as an LLVM load/store instruction, then an offset node that
449 // is added / subtracted from the base pointer to form the address (for
450 // indexed memory ops).
453 // DYNAMIC_STACKALLOC - Allocate some number of bytes on the stack aligned
454 // to a specified boundary. This node always has two return values: a new
455 // stack pointer value and a chain. The first operand is the token chain,
456 // the second is the number of bytes to allocate, and the third is the
457 // alignment boundary. The size is guaranteed to be a multiple of the stack
458 // alignment, and the alignment is guaranteed to be bigger than the stack
459 // alignment (if required) or 0 to get standard stack alignment.
462 // Control flow instructions. These all have token chains.
464 // BR - Unconditional branch. The first operand is the chain
465 // operand, the second is the MBB to branch to.
468 // BRIND - Indirect branch. The first operand is the chain, the second
469 // is the value to branch to, which must be of the same type as the target's
473 // BR_JT - Jumptable branch. The first operand is the chain, the second
474 // is the jumptable index, the last one is the jumptable entry index.
477 // BRCOND - Conditional branch. The first operand is the chain, the
478 // second is the condition, the third is the block to branch to if the
479 // condition is true. If the type of the condition is not i1, then the
480 // high bits must conform to getBooleanContents.
483 // BR_CC - Conditional branch. The behavior is like that of SELECT_CC, in
484 // that the condition is represented as condition code, and two nodes to
485 // compare, rather than as a combined SetCC node. The operands in order are
486 // chain, cc, lhs, rhs, block to branch to if condition is true.
489 // INLINEASM - Represents an inline asm block. This node always has two
490 // return values: a chain and a flag result. The inputs are as follows:
491 // Operand #0 : Input chain.
492 // Operand #1 : a ExternalSymbolSDNode with a pointer to the asm string.
493 // Operand #2n+2: A RegisterNode.
494 // Operand #2n+3: A TargetConstant, indicating if the reg is a use/def
495 // Operand #last: Optional, an incoming flag.
498 // EH_LABEL - Represents a label in mid basic block used to track
499 // locations needed for debug and exception handling tables. These nodes
500 // take a chain as input and return a chain.
503 // STACKSAVE - STACKSAVE has one operand, an input chain. It produces a
504 // value, the same type as the pointer type for the system, and an output
508 // STACKRESTORE has two operands, an input chain and a pointer to restore to
509 // it returns an output chain.
512 // CALLSEQ_START/CALLSEQ_END - These operators mark the beginning and end of
513 // a call sequence, and carry arbitrary information that target might want
514 // to know. The first operand is a chain, the rest are specified by the
515 // target and not touched by the DAG optimizers.
516 // CALLSEQ_START..CALLSEQ_END pairs may not be nested.
517 CALLSEQ_START, // Beginning of a call sequence
518 CALLSEQ_END, // End of a call sequence
520 // VAARG - VAARG has three operands: an input chain, a pointer, and a
521 // SRCVALUE. It returns a pair of values: the vaarg value and a new chain.
524 // VACOPY - VACOPY has five operands: an input chain, a destination pointer,
525 // a source pointer, a SRCVALUE for the destination, and a SRCVALUE for the
529 // VAEND, VASTART - VAEND and VASTART have three operands: an input chain, a
530 // pointer, and a SRCVALUE.
533 // SRCVALUE - This is a node type that holds a Value* that is used to
534 // make reference to a value in the LLVM IR.
537 // PCMARKER - This corresponds to the pcmarker intrinsic.
540 // READCYCLECOUNTER - This corresponds to the readcyclecounter intrinsic.
541 // The only operand is a chain and a value and a chain are produced. The
542 // value is the contents of the architecture specific cycle counter like
543 // register (or other high accuracy low latency clock source)
546 // HANDLENODE node - Used as a handle for various purposes.
549 // TRAMPOLINE - This corresponds to the init_trampoline intrinsic.
550 // It takes as input a token chain, the pointer to the trampoline,
551 // the pointer to the nested function, the pointer to pass for the
552 // 'nest' parameter, a SRCVALUE for the trampoline and another for
553 // the nested function (allowing targets to access the original
554 // Function*). It produces the result of the intrinsic and a token
558 // TRAP - Trapping instruction
561 // PREFETCH - This corresponds to a prefetch intrinsic. It takes chains are
562 // their first operand. The other operands are the address to prefetch,
563 // read / write specifier, and locality specifier.
566 // OUTCHAIN = MEMBARRIER(INCHAIN, load-load, load-store, store-load,
567 // store-store, device)
568 // This corresponds to the memory.barrier intrinsic.
569 // it takes an input chain, 4 operands to specify the type of barrier, an
570 // operand specifying if the barrier applies to device and uncached memory
571 // and produces an output chain.
574 // Val, OUTCHAIN = ATOMIC_CMP_SWAP(INCHAIN, ptr, cmp, swap)
575 // this corresponds to the atomic.lcs intrinsic.
576 // cmp is compared to *ptr, and if equal, swap is stored in *ptr.
577 // the return is always the original value in *ptr
580 // Val, OUTCHAIN = ATOMIC_SWAP(INCHAIN, ptr, amt)
581 // this corresponds to the atomic.swap intrinsic.
582 // amt is stored to *ptr atomically.
583 // the return is always the original value in *ptr
586 // Val, OUTCHAIN = ATOMIC_LOAD_[OpName](INCHAIN, ptr, amt)
587 // this corresponds to the atomic.load.[OpName] intrinsic.
588 // op(*ptr, amt) is stored to *ptr atomically.
589 // the return is always the original value in *ptr
601 /// BUILTIN_OP_END - This must be the last enum value in this list.
602 /// The target-specific pre-isel opcode values start here.
606 /// FIRST_TARGET_MEMORY_OPCODE - Target-specific pre-isel operations
607 /// which do not reference a specific memory location should be less than
608 /// this value. Those that do must not be less than this value, and can
609 /// be used with SelectionDAG::getMemIntrinsicNode.
610 static const int FIRST_TARGET_MEMORY_OPCODE = 1 << 14;
614 /// isBuildVectorAllOnes - Return true if the specified node is a
615 /// BUILD_VECTOR where all of the elements are ~0 or undef.
616 bool isBuildVectorAllOnes(const SDNode *N);
618 /// isBuildVectorAllZeros - Return true if the specified node is a
619 /// BUILD_VECTOR where all of the elements are 0 or undef.
620 bool isBuildVectorAllZeros(const SDNode *N);
622 /// isScalarToVector - Return true if the specified node is a
623 /// ISD::SCALAR_TO_VECTOR node or a BUILD_VECTOR node where only the low
624 /// element is not an undef.
625 bool isScalarToVector(const SDNode *N);
627 //===--------------------------------------------------------------------===//
628 /// MemIndexedMode enum - This enum defines the load / store indexed
629 /// addressing modes.
631 /// UNINDEXED "Normal" load / store. The effective address is already
632 /// computed and is available in the base pointer. The offset
633 /// operand is always undefined. In addition to producing a
634 /// chain, an unindexed load produces one value (result of the
635 /// load); an unindexed store does not produce a value.
637 /// PRE_INC Similar to the unindexed mode where the effective address is
638 /// PRE_DEC the value of the base pointer add / subtract the offset.
639 /// It considers the computation as being folded into the load /
640 /// store operation (i.e. the load / store does the address
641 /// computation as well as performing the memory transaction).
642 /// The base operand is always undefined. In addition to
643 /// producing a chain, pre-indexed load produces two values
644 /// (result of the load and the result of the address
645 /// computation); a pre-indexed store produces one value (result
646 /// of the address computation).
648 /// POST_INC The effective address is the value of the base pointer. The
649 /// POST_DEC value of the offset operand is then added to / subtracted
650 /// from the base after memory transaction. In addition to
651 /// producing a chain, post-indexed load produces two values
652 /// (the result of the load and the result of the base +/- offset
653 /// computation); a post-indexed store produces one value (the
654 /// the result of the base +/- offset computation).
656 enum MemIndexedMode {
665 //===--------------------------------------------------------------------===//
666 /// LoadExtType enum - This enum defines the three variants of LOADEXT
667 /// (load with extension).
669 /// SEXTLOAD loads the integer operand and sign extends it to a larger
670 /// integer result type.
671 /// ZEXTLOAD loads the integer operand and zero extends it to a larger
672 /// integer result type.
673 /// EXTLOAD is used for three things: floating point extending loads,
674 /// integer extending loads [the top bits are undefined], and vector
675 /// extending loads [load into low elt].
685 //===--------------------------------------------------------------------===//
686 /// ISD::CondCode enum - These are ordered carefully to make the bitfields
687 /// below work out, when considering SETFALSE (something that never exists
688 /// dynamically) as 0. "U" -> Unsigned (for integer operands) or Unordered
689 /// (for floating point), "L" -> Less than, "G" -> Greater than, "E" -> Equal
690 /// to. If the "N" column is 1, the result of the comparison is undefined if
691 /// the input is a NAN.
693 /// All of these (except for the 'always folded ops') should be handled for
694 /// floating point. For integer, only the SETEQ,SETNE,SETLT,SETLE,SETGT,
695 /// SETGE,SETULT,SETULE,SETUGT, and SETUGE opcodes are used.
697 /// Note that these are laid out in a specific order to allow bit-twiddling
698 /// to transform conditions.
700 // Opcode N U L G E Intuitive operation
701 SETFALSE, // 0 0 0 0 Always false (always folded)
702 SETOEQ, // 0 0 0 1 True if ordered and equal
703 SETOGT, // 0 0 1 0 True if ordered and greater than
704 SETOGE, // 0 0 1 1 True if ordered and greater than or equal
705 SETOLT, // 0 1 0 0 True if ordered and less than
706 SETOLE, // 0 1 0 1 True if ordered and less than or equal
707 SETONE, // 0 1 1 0 True if ordered and operands are unequal
708 SETO, // 0 1 1 1 True if ordered (no nans)
709 SETUO, // 1 0 0 0 True if unordered: isnan(X) | isnan(Y)
710 SETUEQ, // 1 0 0 1 True if unordered or equal
711 SETUGT, // 1 0 1 0 True if unordered or greater than
712 SETUGE, // 1 0 1 1 True if unordered, greater than, or equal
713 SETULT, // 1 1 0 0 True if unordered or less than
714 SETULE, // 1 1 0 1 True if unordered, less than, or equal
715 SETUNE, // 1 1 1 0 True if unordered or not equal
716 SETTRUE, // 1 1 1 1 Always true (always folded)
717 // Don't care operations: undefined if the input is a nan.
718 SETFALSE2, // 1 X 0 0 0 Always false (always folded)
719 SETEQ, // 1 X 0 0 1 True if equal
720 SETGT, // 1 X 0 1 0 True if greater than
721 SETGE, // 1 X 0 1 1 True if greater than or equal
722 SETLT, // 1 X 1 0 0 True if less than
723 SETLE, // 1 X 1 0 1 True if less than or equal
724 SETNE, // 1 X 1 1 0 True if not equal
725 SETTRUE2, // 1 X 1 1 1 Always true (always folded)
727 SETCC_INVALID // Marker value.
730 /// isSignedIntSetCC - Return true if this is a setcc instruction that
731 /// performs a signed comparison when used with integer operands.
732 inline bool isSignedIntSetCC(CondCode Code) {
733 return Code == SETGT || Code == SETGE || Code == SETLT || Code == SETLE;
736 /// isUnsignedIntSetCC - Return true if this is a setcc instruction that
737 /// performs an unsigned comparison when used with integer operands.
738 inline bool isUnsignedIntSetCC(CondCode Code) {
739 return Code == SETUGT || Code == SETUGE || Code == SETULT || Code == SETULE;
742 /// isTrueWhenEqual - Return true if the specified condition returns true if
743 /// the two operands to the condition are equal. Note that if one of the two
744 /// operands is a NaN, this value is meaningless.
745 inline bool isTrueWhenEqual(CondCode Cond) {
746 return ((int)Cond & 1) != 0;
749 /// getUnorderedFlavor - This function returns 0 if the condition is always
750 /// false if an operand is a NaN, 1 if the condition is always true if the
751 /// operand is a NaN, and 2 if the condition is undefined if the operand is a
753 inline unsigned getUnorderedFlavor(CondCode Cond) {
754 return ((int)Cond >> 3) & 3;
757 /// getSetCCInverse - Return the operation corresponding to !(X op Y), where
758 /// 'op' is a valid SetCC operation.
759 CondCode getSetCCInverse(CondCode Operation, bool isInteger);
761 /// getSetCCSwappedOperands - Return the operation corresponding to (Y op X)
762 /// when given the operation for (X op Y).
763 CondCode getSetCCSwappedOperands(CondCode Operation);
765 /// getSetCCOrOperation - Return the result of a logical OR between different
766 /// comparisons of identical values: ((X op1 Y) | (X op2 Y)). This
767 /// function returns SETCC_INVALID if it is not possible to represent the
768 /// resultant comparison.
769 CondCode getSetCCOrOperation(CondCode Op1, CondCode Op2, bool isInteger);
771 /// getSetCCAndOperation - Return the result of a logical AND between
772 /// different comparisons of identical values: ((X op1 Y) & (X op2 Y)). This
773 /// function returns SETCC_INVALID if it is not possible to represent the
774 /// resultant comparison.
775 CondCode getSetCCAndOperation(CondCode Op1, CondCode Op2, bool isInteger);
777 //===--------------------------------------------------------------------===//
778 /// CvtCode enum - This enum defines the various converts CONVERT_RNDSAT
781 CVT_FF, // Float from Float
782 CVT_FS, // Float from Signed
783 CVT_FU, // Float from Unsigned
784 CVT_SF, // Signed from Float
785 CVT_UF, // Unsigned from Float
786 CVT_SS, // Signed from Signed
787 CVT_SU, // Signed from Unsigned
788 CVT_US, // Unsigned from Signed
789 CVT_UU, // Unsigned from Unsigned
790 CVT_INVALID // Marker - Invalid opcode
792 } // end llvm::ISD namespace
795 //===----------------------------------------------------------------------===//
796 /// SDValue - Unlike LLVM values, Selection DAG nodes may return multiple
797 /// values as the result of a computation. Many nodes return multiple values,
798 /// from loads (which define a token and a return value) to ADDC (which returns
799 /// a result and a carry value), to calls (which may return an arbitrary number
802 /// As such, each use of a SelectionDAG computation must indicate the node that
803 /// computes it as well as which return value to use from that node. This pair
804 /// of information is represented with the SDValue value type.
807 SDNode *Node; // The node defining the value we are using.
808 unsigned ResNo; // Which return value of the node we are using.
810 SDValue() : Node(0), ResNo(0) {}
811 SDValue(SDNode *node, unsigned resno) : Node(node), ResNo(resno) {}
813 /// get the index which selects a specific result in the SDNode
814 unsigned getResNo() const { return ResNo; }
816 /// get the SDNode which holds the desired result
817 SDNode *getNode() const { return Node; }
820 void setNode(SDNode *N) { Node = N; }
822 bool operator==(const SDValue &O) const {
823 return Node == O.Node && ResNo == O.ResNo;
825 bool operator!=(const SDValue &O) const {
826 return !operator==(O);
828 bool operator<(const SDValue &O) const {
829 return Node < O.Node || (Node == O.Node && ResNo < O.ResNo);
832 SDValue getValue(unsigned R) const {
833 return SDValue(Node, R);
836 // isOperandOf - Return true if this node is an operand of N.
837 bool isOperandOf(SDNode *N) const;
839 /// getValueType - Return the ValueType of the referenced return value.
841 inline EVT getValueType() const;
843 /// getValueSizeInBits - Returns the size of the value in bits.
845 unsigned getValueSizeInBits() const {
846 return getValueType().getSizeInBits();
849 // Forwarding methods - These forward to the corresponding methods in SDNode.
850 inline unsigned getOpcode() const;
851 inline unsigned getNumOperands() const;
852 inline const SDValue &getOperand(unsigned i) const;
853 inline uint64_t getConstantOperandVal(unsigned i) const;
854 inline bool isTargetMemoryOpcode() const;
855 inline bool isTargetOpcode() const;
856 inline bool isMachineOpcode() const;
857 inline unsigned getMachineOpcode() const;
858 inline const DebugLoc getDebugLoc() const;
861 /// reachesChainWithoutSideEffects - Return true if this operand (which must
862 /// be a chain) reaches the specified operand without crossing any
863 /// side-effecting instructions. In practice, this looks through token
864 /// factors and non-volatile loads. In order to remain efficient, this only
865 /// looks a couple of nodes in, it does not do an exhaustive search.
866 bool reachesChainWithoutSideEffects(SDValue Dest,
867 unsigned Depth = 2) const;
869 /// use_empty - Return true if there are no nodes using value ResNo
872 inline bool use_empty() const;
874 /// hasOneUse - Return true if there is exactly one node using value
877 inline bool hasOneUse() const;
881 template<> struct DenseMapInfo<SDValue> {
882 static inline SDValue getEmptyKey() {
883 return SDValue((SDNode*)-1, -1U);
885 static inline SDValue getTombstoneKey() {
886 return SDValue((SDNode*)-1, 0);
888 static unsigned getHashValue(const SDValue &Val) {
889 return ((unsigned)((uintptr_t)Val.getNode() >> 4) ^
890 (unsigned)((uintptr_t)Val.getNode() >> 9)) + Val.getResNo();
892 static bool isEqual(const SDValue &LHS, const SDValue &RHS) {
896 template <> struct isPodLike<SDValue> { static const bool value = true; };
899 /// simplify_type specializations - Allow casting operators to work directly on
900 /// SDValues as if they were SDNode*'s.
901 template<> struct simplify_type<SDValue> {
902 typedef SDNode* SimpleType;
903 static SimpleType getSimplifiedValue(const SDValue &Val) {
904 return static_cast<SimpleType>(Val.getNode());
907 template<> struct simplify_type<const SDValue> {
908 typedef SDNode* SimpleType;
909 static SimpleType getSimplifiedValue(const SDValue &Val) {
910 return static_cast<SimpleType>(Val.getNode());
914 /// SDUse - Represents a use of a SDNode. This class holds an SDValue,
915 /// which records the SDNode being used and the result number, a
916 /// pointer to the SDNode using the value, and Next and Prev pointers,
917 /// which link together all the uses of an SDNode.
920 /// Val - The value being used.
922 /// User - The user of this value.
924 /// Prev, Next - Pointers to the uses list of the SDNode referred by
928 SDUse(const SDUse &U); // Do not implement
929 void operator=(const SDUse &U); // Do not implement
932 SDUse() : Val(), User(NULL), Prev(NULL), Next(NULL) {}
934 /// Normally SDUse will just implicitly convert to an SDValue that it holds.
935 operator const SDValue&() const { return Val; }
937 /// If implicit conversion to SDValue doesn't work, the get() method returns
939 const SDValue &get() const { return Val; }
941 /// getUser - This returns the SDNode that contains this Use.
942 SDNode *getUser() { return User; }
944 /// getNext - Get the next SDUse in the use list.
945 SDUse *getNext() const { return Next; }
947 /// getNode - Convenience function for get().getNode().
948 SDNode *getNode() const { return Val.getNode(); }
949 /// getResNo - Convenience function for get().getResNo().
950 unsigned getResNo() const { return Val.getResNo(); }
951 /// getValueType - Convenience function for get().getValueType().
952 EVT getValueType() const { return Val.getValueType(); }
954 /// operator== - Convenience function for get().operator==
955 bool operator==(const SDValue &V) const {
959 /// operator!= - Convenience function for get().operator!=
960 bool operator!=(const SDValue &V) const {
964 /// operator< - Convenience function for get().operator<
965 bool operator<(const SDValue &V) const {
970 friend class SelectionDAG;
973 void setUser(SDNode *p) { User = p; }
975 /// set - Remove this use from its existing use list, assign it the
976 /// given value, and add it to the new value's node's use list.
977 inline void set(const SDValue &V);
978 /// setInitial - like set, but only supports initializing a newly-allocated
979 /// SDUse with a non-null value.
980 inline void setInitial(const SDValue &V);
981 /// setNode - like set, but only sets the Node portion of the value,
982 /// leaving the ResNo portion unmodified.
983 inline void setNode(SDNode *N);
985 void addToList(SDUse **List) {
987 if (Next) Next->Prev = &Next;
992 void removeFromList() {
994 if (Next) Next->Prev = Prev;
998 /// simplify_type specializations - Allow casting operators to work directly on
999 /// SDValues as if they were SDNode*'s.
1000 template<> struct simplify_type<SDUse> {
1001 typedef SDNode* SimpleType;
1002 static SimpleType getSimplifiedValue(const SDUse &Val) {
1003 return static_cast<SimpleType>(Val.getNode());
1006 template<> struct simplify_type<const SDUse> {
1007 typedef SDNode* SimpleType;
1008 static SimpleType getSimplifiedValue(const SDUse &Val) {
1009 return static_cast<SimpleType>(Val.getNode());
1014 /// SDNode - Represents one node in the SelectionDAG.
1016 class SDNode : public FoldingSetNode, public ilist_node<SDNode> {
1018 /// NodeType - The operation that this node performs.
1022 /// OperandsNeedDelete - This is true if OperandList was new[]'d. If true,
1023 /// then they will be delete[]'d when the node is destroyed.
1024 uint16_t OperandsNeedDelete : 1;
1027 /// SubclassData - This member is defined by this class, but is not used for
1028 /// anything. Subclasses can use it to hold whatever state they find useful.
1029 /// This field is initialized to zero by the ctor.
1030 uint16_t SubclassData : 15;
1033 /// NodeId - Unique id per SDNode in the DAG.
1036 /// OperandList - The values that are used by this operation.
1040 /// ValueList - The types of the values this node defines. SDNode's may
1041 /// define multiple values simultaneously.
1042 const EVT *ValueList;
1044 /// UseList - List of uses for this SDNode.
1047 /// NumOperands/NumValues - The number of entries in the Operand/Value list.
1048 unsigned short NumOperands, NumValues;
1050 /// debugLoc - source line information.
1053 /// getValueTypeList - Return a pointer to the specified value type.
1054 static const EVT *getValueTypeList(EVT VT);
1056 friend class SelectionDAG;
1057 friend struct ilist_traits<SDNode>;
1060 //===--------------------------------------------------------------------===//
1064 /// getOpcode - Return the SelectionDAG opcode value for this node. For
1065 /// pre-isel nodes (those for which isMachineOpcode returns false), these
1066 /// are the opcode values in the ISD and <target>ISD namespaces. For
1067 /// post-isel opcodes, see getMachineOpcode.
1068 unsigned getOpcode() const { return (unsigned short)NodeType; }
1070 /// isTargetOpcode - Test if this node has a target-specific opcode (in the
1071 /// \<target\>ISD namespace).
1072 bool isTargetOpcode() const { return NodeType >= ISD::BUILTIN_OP_END; }
1074 /// isTargetMemoryOpcode - Test if this node has a target-specific
1075 /// memory-referencing opcode (in the \<target\>ISD namespace and
1076 /// greater than FIRST_TARGET_MEMORY_OPCODE).
1077 bool isTargetMemoryOpcode() const {
1078 return NodeType >= ISD::FIRST_TARGET_MEMORY_OPCODE;
1081 /// isMachineOpcode - Test if this node has a post-isel opcode, directly
1082 /// corresponding to a MachineInstr opcode.
1083 bool isMachineOpcode() const { return NodeType < 0; }
1085 /// getMachineOpcode - This may only be called if isMachineOpcode returns
1086 /// true. It returns the MachineInstr opcode value that the node's opcode
1088 unsigned getMachineOpcode() const {
1089 assert(isMachineOpcode() && "Not a MachineInstr opcode!");
1093 /// use_empty - Return true if there are no uses of this node.
1095 bool use_empty() const { return UseList == NULL; }
1097 /// hasOneUse - Return true if there is exactly one use of this node.
1099 bool hasOneUse() const {
1100 return !use_empty() && llvm::next(use_begin()) == use_end();
1103 /// use_size - Return the number of uses of this node. This method takes
1104 /// time proportional to the number of uses.
1106 size_t use_size() const { return std::distance(use_begin(), use_end()); }
1108 /// getNodeId - Return the unique node id.
1110 int getNodeId() const { return NodeId; }
1112 /// setNodeId - Set unique node id.
1113 void setNodeId(int Id) { NodeId = Id; }
1115 /// getDebugLoc - Return the source location info.
1116 const DebugLoc getDebugLoc() const { return debugLoc; }
1118 /// setDebugLoc - Set source location info. Try to avoid this, putting
1119 /// it in the constructor is preferable.
1120 void setDebugLoc(const DebugLoc dl) { debugLoc = dl; }
1122 /// use_iterator - This class provides iterator support for SDUse
1123 /// operands that use a specific SDNode.
1125 : public std::iterator<std::forward_iterator_tag, SDUse, ptrdiff_t> {
1127 explicit use_iterator(SDUse *op) : Op(op) {
1129 friend class SDNode;
1131 typedef std::iterator<std::forward_iterator_tag,
1132 SDUse, ptrdiff_t>::reference reference;
1133 typedef std::iterator<std::forward_iterator_tag,
1134 SDUse, ptrdiff_t>::pointer pointer;
1136 use_iterator(const use_iterator &I) : Op(I.Op) {}
1137 use_iterator() : Op(0) {}
1139 bool operator==(const use_iterator &x) const {
1142 bool operator!=(const use_iterator &x) const {
1143 return !operator==(x);
1146 /// atEnd - return true if this iterator is at the end of uses list.
1147 bool atEnd() const { return Op == 0; }
1149 // Iterator traversal: forward iteration only.
1150 use_iterator &operator++() { // Preincrement
1151 assert(Op && "Cannot increment end iterator!");
1156 use_iterator operator++(int) { // Postincrement
1157 use_iterator tmp = *this; ++*this; return tmp;
1160 /// Retrieve a pointer to the current user node.
1161 SDNode *operator*() const {
1162 assert(Op && "Cannot dereference end iterator!");
1163 return Op->getUser();
1166 SDNode *operator->() const { return operator*(); }
1168 SDUse &getUse() const { return *Op; }
1170 /// getOperandNo - Retrieve the operand # of this use in its user.
1172 unsigned getOperandNo() const {
1173 assert(Op && "Cannot dereference end iterator!");
1174 return (unsigned)(Op - Op->getUser()->OperandList);
1178 /// use_begin/use_end - Provide iteration support to walk over all uses
1181 use_iterator use_begin() const {
1182 return use_iterator(UseList);
1185 static use_iterator use_end() { return use_iterator(0); }
1188 /// hasNUsesOfValue - Return true if there are exactly NUSES uses of the
1189 /// indicated value. This method ignores uses of other values defined by this
1191 bool hasNUsesOfValue(unsigned NUses, unsigned Value) const;
1193 /// hasAnyUseOfValue - Return true if there are any use of the indicated
1194 /// value. This method ignores uses of other values defined by this operation.
1195 bool hasAnyUseOfValue(unsigned Value) const;
1197 /// isOnlyUserOf - Return true if this node is the only use of N.
1199 bool isOnlyUserOf(SDNode *N) const;
1201 /// isOperandOf - Return true if this node is an operand of N.
1203 bool isOperandOf(SDNode *N) const;
1205 /// isPredecessorOf - Return true if this node is a predecessor of N. This
1206 /// node is either an operand of N or it can be reached by recursively
1207 /// traversing up the operands.
1208 /// NOTE: this is an expensive method. Use it carefully.
1209 bool isPredecessorOf(SDNode *N) const;
1211 /// getNumOperands - Return the number of values used by this operation.
1213 unsigned getNumOperands() const { return NumOperands; }
1215 /// getConstantOperandVal - Helper method returns the integer value of a
1216 /// ConstantSDNode operand.
1217 uint64_t getConstantOperandVal(unsigned Num) const;
1219 const SDValue &getOperand(unsigned Num) const {
1220 assert(Num < NumOperands && "Invalid child # of SDNode!");
1221 return OperandList[Num];
1224 typedef SDUse* op_iterator;
1225 op_iterator op_begin() const { return OperandList; }
1226 op_iterator op_end() const { return OperandList+NumOperands; }
1228 SDVTList getVTList() const {
1229 SDVTList X = { ValueList, NumValues };
1233 /// getFlaggedNode - If this node has a flag operand, return the node
1234 /// to which the flag operand points. Otherwise return NULL.
1235 SDNode *getFlaggedNode() const {
1236 if (getNumOperands() != 0 &&
1237 getOperand(getNumOperands()-1).getValueType().getSimpleVT() == MVT::Flag)
1238 return getOperand(getNumOperands()-1).getNode();
1242 // If this is a pseudo op, like copyfromreg, look to see if there is a
1243 // real target node flagged to it. If so, return the target node.
1244 const SDNode *getFlaggedMachineNode() const {
1245 const SDNode *FoundNode = this;
1247 // Climb up flag edges until a machine-opcode node is found, or the
1248 // end of the chain is reached.
1249 while (!FoundNode->isMachineOpcode()) {
1250 const SDNode *N = FoundNode->getFlaggedNode();
1258 /// getNumValues - Return the number of values defined/returned by this
1261 unsigned getNumValues() const { return NumValues; }
1263 /// getValueType - Return the type of a specified result.
1265 EVT getValueType(unsigned ResNo) const {
1266 assert(ResNo < NumValues && "Illegal result number!");
1267 return ValueList[ResNo];
1270 /// getValueSizeInBits - Returns MVT::getSizeInBits(getValueType(ResNo)).
1272 unsigned getValueSizeInBits(unsigned ResNo) const {
1273 return getValueType(ResNo).getSizeInBits();
1276 typedef const EVT* value_iterator;
1277 value_iterator value_begin() const { return ValueList; }
1278 value_iterator value_end() const { return ValueList+NumValues; }
1280 /// getOperationName - Return the opcode of this operation for printing.
1282 std::string getOperationName(const SelectionDAG *G = 0) const;
1283 static const char* getIndexedModeName(ISD::MemIndexedMode AM);
1284 void print_types(raw_ostream &OS, const SelectionDAG *G) const;
1285 void print_details(raw_ostream &OS, const SelectionDAG *G) const;
1286 void print(raw_ostream &OS, const SelectionDAG *G = 0) const;
1287 void printr(raw_ostream &OS, const SelectionDAG *G = 0) const;
1288 /// printWithDepth - Print a SelectionDAG node and children up to
1289 /// depth "depth." "limit" controls whether a message should be
1290 /// printed if we hit depth "depth."
1292 void printWithDepth(raw_ostream &O, const SelectionDAG *G = 0,
1293 unsigned depth = -1, unsigned indent = 0,
1294 bool limit = false) const;
1295 /// printWithFullDepth - Print a SelectionDAG node and all children
1296 /// down to the leaves.
1298 void printWithFullDepth(raw_ostream &O, const SelectionDAG *G = 0,
1299 unsigned indent = 0) const;
1302 void dump(const SelectionDAG *G) const;
1303 void dumpr(const SelectionDAG *G) const;
1304 /// dumpWithDepth - printWithDepth to dbgs().
1306 void dumpWithDepth(const SelectionDAG *G = 0, unsigned depth = 1,
1307 unsigned indent = 0, bool limit = false) const;
1308 /// dumpWithFullDepth - printWithFullDepth to dbgs().
1310 void dumpWithFullDepth(const SelectionDAG *G = 0, unsigned indent = 0) const;
1312 static bool classof(const SDNode *) { return true; }
1314 /// Profile - Gather unique data for the node.
1316 void Profile(FoldingSetNodeID &ID) const;
1318 /// addUse - This method should only be used by the SDUse class.
1320 void addUse(SDUse &U) { U.addToList(&UseList); }
1323 static SDVTList getSDVTList(EVT VT) {
1324 SDVTList Ret = { getValueTypeList(VT), 1 };
1328 SDNode(unsigned Opc, const DebugLoc dl, SDVTList VTs, const SDValue *Ops,
1330 : NodeType(Opc), OperandsNeedDelete(true), SubclassData(0),
1332 OperandList(NumOps ? new SDUse[NumOps] : 0),
1333 ValueList(VTs.VTs), UseList(NULL),
1334 NumOperands(NumOps), NumValues(VTs.NumVTs),
1336 for (unsigned i = 0; i != NumOps; ++i) {
1337 OperandList[i].setUser(this);
1338 OperandList[i].setInitial(Ops[i]);
1342 /// This constructor adds no operands itself; operands can be
1343 /// set later with InitOperands.
1344 SDNode(unsigned Opc, const DebugLoc dl, SDVTList VTs)
1345 : NodeType(Opc), OperandsNeedDelete(false), SubclassData(0),
1346 NodeId(-1), OperandList(0), ValueList(VTs.VTs), UseList(NULL),
1347 NumOperands(0), NumValues(VTs.NumVTs),
1350 /// InitOperands - Initialize the operands list of this with 1 operand.
1351 void InitOperands(SDUse *Ops, const SDValue &Op0) {
1352 Ops[0].setUser(this);
1353 Ops[0].setInitial(Op0);
1358 /// InitOperands - Initialize the operands list of this with 2 operands.
1359 void InitOperands(SDUse *Ops, const SDValue &Op0, const SDValue &Op1) {
1360 Ops[0].setUser(this);
1361 Ops[0].setInitial(Op0);
1362 Ops[1].setUser(this);
1363 Ops[1].setInitial(Op1);
1368 /// InitOperands - Initialize the operands list of this with 3 operands.
1369 void InitOperands(SDUse *Ops, const SDValue &Op0, const SDValue &Op1,
1370 const SDValue &Op2) {
1371 Ops[0].setUser(this);
1372 Ops[0].setInitial(Op0);
1373 Ops[1].setUser(this);
1374 Ops[1].setInitial(Op1);
1375 Ops[2].setUser(this);
1376 Ops[2].setInitial(Op2);
1381 /// InitOperands - Initialize the operands list of this with 4 operands.
1382 void InitOperands(SDUse *Ops, const SDValue &Op0, const SDValue &Op1,
1383 const SDValue &Op2, const SDValue &Op3) {
1384 Ops[0].setUser(this);
1385 Ops[0].setInitial(Op0);
1386 Ops[1].setUser(this);
1387 Ops[1].setInitial(Op1);
1388 Ops[2].setUser(this);
1389 Ops[2].setInitial(Op2);
1390 Ops[3].setUser(this);
1391 Ops[3].setInitial(Op3);
1396 /// InitOperands - Initialize the operands list of this with N operands.
1397 void InitOperands(SDUse *Ops, const SDValue *Vals, unsigned N) {
1398 for (unsigned i = 0; i != N; ++i) {
1399 Ops[i].setUser(this);
1400 Ops[i].setInitial(Vals[i]);
1406 /// DropOperands - Release the operands and set this node to have
1408 void DropOperands();
1412 // Define inline functions from the SDValue class.
1414 inline unsigned SDValue::getOpcode() const {
1415 return Node->getOpcode();
1417 inline EVT SDValue::getValueType() const {
1418 return Node->getValueType(ResNo);
1420 inline unsigned SDValue::getNumOperands() const {
1421 return Node->getNumOperands();
1423 inline const SDValue &SDValue::getOperand(unsigned i) const {
1424 return Node->getOperand(i);
1426 inline uint64_t SDValue::getConstantOperandVal(unsigned i) const {
1427 return Node->getConstantOperandVal(i);
1429 inline bool SDValue::isTargetOpcode() const {
1430 return Node->isTargetOpcode();
1432 inline bool SDValue::isTargetMemoryOpcode() const {
1433 return Node->isTargetMemoryOpcode();
1435 inline bool SDValue::isMachineOpcode() const {
1436 return Node->isMachineOpcode();
1438 inline unsigned SDValue::getMachineOpcode() const {
1439 return Node->getMachineOpcode();
1441 inline bool SDValue::use_empty() const {
1442 return !Node->hasAnyUseOfValue(ResNo);
1444 inline bool SDValue::hasOneUse() const {
1445 return Node->hasNUsesOfValue(1, ResNo);
1447 inline const DebugLoc SDValue::getDebugLoc() const {
1448 return Node->getDebugLoc();
1451 // Define inline functions from the SDUse class.
1453 inline void SDUse::set(const SDValue &V) {
1454 if (Val.getNode()) removeFromList();
1456 if (V.getNode()) V.getNode()->addUse(*this);
1459 inline void SDUse::setInitial(const SDValue &V) {
1461 V.getNode()->addUse(*this);
1464 inline void SDUse::setNode(SDNode *N) {
1465 if (Val.getNode()) removeFromList();
1467 if (N) N->addUse(*this);
1470 /// UnarySDNode - This class is used for single-operand SDNodes. This is solely
1471 /// to allow co-allocation of node operands with the node itself.
1472 class UnarySDNode : public SDNode {
1475 UnarySDNode(unsigned Opc, DebugLoc dl, SDVTList VTs, SDValue X)
1476 : SDNode(Opc, dl, VTs) {
1477 InitOperands(&Op, X);
1481 /// BinarySDNode - This class is used for two-operand SDNodes. This is solely
1482 /// to allow co-allocation of node operands with the node itself.
1483 class BinarySDNode : public SDNode {
1486 BinarySDNode(unsigned Opc, DebugLoc dl, SDVTList VTs, SDValue X, SDValue Y)
1487 : SDNode(Opc, dl, VTs) {
1488 InitOperands(Ops, X, Y);
1492 /// TernarySDNode - This class is used for three-operand SDNodes. This is solely
1493 /// to allow co-allocation of node operands with the node itself.
1494 class TernarySDNode : public SDNode {
1497 TernarySDNode(unsigned Opc, DebugLoc dl, SDVTList VTs, SDValue X, SDValue Y,
1499 : SDNode(Opc, dl, VTs) {
1500 InitOperands(Ops, X, Y, Z);
1505 /// HandleSDNode - This class is used to form a handle around another node that
1506 /// is persistant and is updated across invocations of replaceAllUsesWith on its
1507 /// operand. This node should be directly created by end-users and not added to
1508 /// the AllNodes list.
1509 class HandleSDNode : public SDNode {
1512 // FIXME: Remove the "noinline" attribute once <rdar://problem/5852746> is
1515 explicit __attribute__((__noinline__)) HandleSDNode(SDValue X)
1517 explicit HandleSDNode(SDValue X)
1519 : SDNode(ISD::HANDLENODE, DebugLoc::getUnknownLoc(),
1520 getSDVTList(MVT::Other)) {
1521 InitOperands(&Op, X);
1524 const SDValue &getValue() const { return Op; }
1527 /// Abstact virtual class for operations for memory operations
1528 class MemSDNode : public SDNode {
1530 // MemoryVT - VT of in-memory value.
1534 /// MMO - Memory reference information.
1535 MachineMemOperand *MMO;
1538 MemSDNode(unsigned Opc, DebugLoc dl, SDVTList VTs, EVT MemoryVT,
1539 MachineMemOperand *MMO);
1541 MemSDNode(unsigned Opc, DebugLoc dl, SDVTList VTs, const SDValue *Ops,
1542 unsigned NumOps, EVT MemoryVT, MachineMemOperand *MMO);
1544 bool readMem() const { return MMO->isLoad(); }
1545 bool writeMem() const { return MMO->isStore(); }
1547 /// Returns alignment and volatility of the memory access
1548 unsigned getOriginalAlignment() const {
1549 return MMO->getBaseAlignment();
1551 unsigned getAlignment() const {
1552 return MMO->getAlignment();
1555 /// getRawSubclassData - Return the SubclassData value, which contains an
1556 /// encoding of the volatile flag, as well as bits used by subclasses. This
1557 /// function should only be used to compute a FoldingSetNodeID value.
1558 unsigned getRawSubclassData() const {
1559 return SubclassData;
1562 bool isVolatile() const { return (SubclassData >> 5) & 1; }
1564 /// Returns the SrcValue and offset that describes the location of the access
1565 const Value *getSrcValue() const { return MMO->getValue(); }
1566 int64_t getSrcValueOffset() const { return MMO->getOffset(); }
1568 /// getMemoryVT - Return the type of the in-memory value.
1569 EVT getMemoryVT() const { return MemoryVT; }
1571 /// getMemOperand - Return a MachineMemOperand object describing the memory
1572 /// reference performed by operation.
1573 MachineMemOperand *getMemOperand() const { return MMO; }
1575 /// refineAlignment - Update this MemSDNode's MachineMemOperand information
1576 /// to reflect the alignment of NewMMO, if it has a greater alignment.
1577 /// This must only be used when the new alignment applies to all users of
1578 /// this MachineMemOperand.
1579 void refineAlignment(const MachineMemOperand *NewMMO) {
1580 MMO->refineAlignment(NewMMO);
1583 const SDValue &getChain() const { return getOperand(0); }
1584 const SDValue &getBasePtr() const {
1585 return getOperand(getOpcode() == ISD::STORE ? 2 : 1);
1588 // Methods to support isa and dyn_cast
1589 static bool classof(const MemSDNode *) { return true; }
1590 static bool classof(const SDNode *N) {
1591 // For some targets, we lower some target intrinsics to a MemIntrinsicNode
1592 // with either an intrinsic or a target opcode.
1593 return N->getOpcode() == ISD::LOAD ||
1594 N->getOpcode() == ISD::STORE ||
1595 N->getOpcode() == ISD::ATOMIC_CMP_SWAP ||
1596 N->getOpcode() == ISD::ATOMIC_SWAP ||
1597 N->getOpcode() == ISD::ATOMIC_LOAD_ADD ||
1598 N->getOpcode() == ISD::ATOMIC_LOAD_SUB ||
1599 N->getOpcode() == ISD::ATOMIC_LOAD_AND ||
1600 N->getOpcode() == ISD::ATOMIC_LOAD_OR ||
1601 N->getOpcode() == ISD::ATOMIC_LOAD_XOR ||
1602 N->getOpcode() == ISD::ATOMIC_LOAD_NAND ||
1603 N->getOpcode() == ISD::ATOMIC_LOAD_MIN ||
1604 N->getOpcode() == ISD::ATOMIC_LOAD_MAX ||
1605 N->getOpcode() == ISD::ATOMIC_LOAD_UMIN ||
1606 N->getOpcode() == ISD::ATOMIC_LOAD_UMAX ||
1607 N->isTargetMemoryOpcode();
1611 /// AtomicSDNode - A SDNode reprenting atomic operations.
1613 class AtomicSDNode : public MemSDNode {
1617 // Opc: opcode for atomic
1618 // VTL: value type list
1619 // Chain: memory chain for operaand
1620 // Ptr: address to update as a SDValue
1621 // Cmp: compare value
1623 // SrcVal: address to update as a Value (used for MemOperand)
1624 // Align: alignment of memory
1625 AtomicSDNode(unsigned Opc, DebugLoc dl, SDVTList VTL, EVT MemVT,
1626 SDValue Chain, SDValue Ptr,
1627 SDValue Cmp, SDValue Swp, MachineMemOperand *MMO)
1628 : MemSDNode(Opc, dl, VTL, MemVT, MMO) {
1629 assert(readMem() && "Atomic MachineMemOperand is not a load!");
1630 assert(writeMem() && "Atomic MachineMemOperand is not a store!");
1631 InitOperands(Ops, Chain, Ptr, Cmp, Swp);
1633 AtomicSDNode(unsigned Opc, DebugLoc dl, SDVTList VTL, EVT MemVT,
1634 SDValue Chain, SDValue Ptr,
1635 SDValue Val, MachineMemOperand *MMO)
1636 : MemSDNode(Opc, dl, VTL, MemVT, MMO) {
1637 assert(readMem() && "Atomic MachineMemOperand is not a load!");
1638 assert(writeMem() && "Atomic MachineMemOperand is not a store!");
1639 InitOperands(Ops, Chain, Ptr, Val);
1642 const SDValue &getBasePtr() const { return getOperand(1); }
1643 const SDValue &getVal() const { return getOperand(2); }
1645 bool isCompareAndSwap() const {
1646 unsigned Op = getOpcode();
1647 return Op == ISD::ATOMIC_CMP_SWAP;
1650 // Methods to support isa and dyn_cast
1651 static bool classof(const AtomicSDNode *) { return true; }
1652 static bool classof(const SDNode *N) {
1653 return N->getOpcode() == ISD::ATOMIC_CMP_SWAP ||
1654 N->getOpcode() == ISD::ATOMIC_SWAP ||
1655 N->getOpcode() == ISD::ATOMIC_LOAD_ADD ||
1656 N->getOpcode() == ISD::ATOMIC_LOAD_SUB ||
1657 N->getOpcode() == ISD::ATOMIC_LOAD_AND ||
1658 N->getOpcode() == ISD::ATOMIC_LOAD_OR ||
1659 N->getOpcode() == ISD::ATOMIC_LOAD_XOR ||
1660 N->getOpcode() == ISD::ATOMIC_LOAD_NAND ||
1661 N->getOpcode() == ISD::ATOMIC_LOAD_MIN ||
1662 N->getOpcode() == ISD::ATOMIC_LOAD_MAX ||
1663 N->getOpcode() == ISD::ATOMIC_LOAD_UMIN ||
1664 N->getOpcode() == ISD::ATOMIC_LOAD_UMAX;
1668 /// MemIntrinsicSDNode - This SDNode is used for target intrinsics that touch
1669 /// memory and need an associated MachineMemOperand. Its opcode may be
1670 /// INTRINSIC_VOID, INTRINSIC_W_CHAIN, or a target-specific opcode with a
1671 /// value not less than FIRST_TARGET_MEMORY_OPCODE.
1672 class MemIntrinsicSDNode : public MemSDNode {
1674 MemIntrinsicSDNode(unsigned Opc, DebugLoc dl, SDVTList VTs,
1675 const SDValue *Ops, unsigned NumOps,
1676 EVT MemoryVT, MachineMemOperand *MMO)
1677 : MemSDNode(Opc, dl, VTs, Ops, NumOps, MemoryVT, MMO) {
1680 // Methods to support isa and dyn_cast
1681 static bool classof(const MemIntrinsicSDNode *) { return true; }
1682 static bool classof(const SDNode *N) {
1683 // We lower some target intrinsics to their target opcode
1684 // early a node with a target opcode can be of this class
1685 return N->getOpcode() == ISD::INTRINSIC_W_CHAIN ||
1686 N->getOpcode() == ISD::INTRINSIC_VOID ||
1687 N->isTargetMemoryOpcode();
1691 /// ShuffleVectorSDNode - This SDNode is used to implement the code generator
1692 /// support for the llvm IR shufflevector instruction. It combines elements
1693 /// from two input vectors into a new input vector, with the selection and
1694 /// ordering of elements determined by an array of integers, referred to as
1695 /// the shuffle mask. For input vectors of width N, mask indices of 0..N-1
1696 /// refer to elements from the LHS input, and indices from N to 2N-1 the RHS.
1697 /// An index of -1 is treated as undef, such that the code generator may put
1698 /// any value in the corresponding element of the result.
1699 class ShuffleVectorSDNode : public SDNode {
1702 // The memory for Mask is owned by the SelectionDAG's OperandAllocator, and
1703 // is freed when the SelectionDAG object is destroyed.
1706 friend class SelectionDAG;
1707 ShuffleVectorSDNode(EVT VT, DebugLoc dl, SDValue N1, SDValue N2,
1709 : SDNode(ISD::VECTOR_SHUFFLE, dl, getSDVTList(VT)), Mask(M) {
1710 InitOperands(Ops, N1, N2);
1714 void getMask(SmallVectorImpl<int> &M) const {
1715 EVT VT = getValueType(0);
1717 for (unsigned i = 0, e = VT.getVectorNumElements(); i != e; ++i)
1718 M.push_back(Mask[i]);
1720 int getMaskElt(unsigned Idx) const {
1721 assert(Idx < getValueType(0).getVectorNumElements() && "Idx out of range!");
1725 bool isSplat() const { return isSplatMask(Mask, getValueType(0)); }
1726 int getSplatIndex() const {
1727 assert(isSplat() && "Cannot get splat index for non-splat!");
1730 static bool isSplatMask(const int *Mask, EVT VT);
1732 static bool classof(const ShuffleVectorSDNode *) { return true; }
1733 static bool classof(const SDNode *N) {
1734 return N->getOpcode() == ISD::VECTOR_SHUFFLE;
1738 class ConstantSDNode : public SDNode {
1739 const ConstantInt *Value;
1740 friend class SelectionDAG;
1741 ConstantSDNode(bool isTarget, const ConstantInt *val, EVT VT)
1742 : SDNode(isTarget ? ISD::TargetConstant : ISD::Constant,
1743 DebugLoc::getUnknownLoc(), getSDVTList(VT)), Value(val) {
1747 const ConstantInt *getConstantIntValue() const { return Value; }
1748 const APInt &getAPIntValue() const { return Value->getValue(); }
1749 uint64_t getZExtValue() const { return Value->getZExtValue(); }
1750 int64_t getSExtValue() const { return Value->getSExtValue(); }
1752 bool isNullValue() const { return Value->isNullValue(); }
1753 bool isAllOnesValue() const { return Value->isAllOnesValue(); }
1755 static bool classof(const ConstantSDNode *) { return true; }
1756 static bool classof(const SDNode *N) {
1757 return N->getOpcode() == ISD::Constant ||
1758 N->getOpcode() == ISD::TargetConstant;
1762 class ConstantFPSDNode : public SDNode {
1763 const ConstantFP *Value;
1764 friend class SelectionDAG;
1765 ConstantFPSDNode(bool isTarget, const ConstantFP *val, EVT VT)
1766 : SDNode(isTarget ? ISD::TargetConstantFP : ISD::ConstantFP,
1767 DebugLoc::getUnknownLoc(), getSDVTList(VT)), Value(val) {
1771 const APFloat& getValueAPF() const { return Value->getValueAPF(); }
1772 const ConstantFP *getConstantFPValue() const { return Value; }
1774 /// isExactlyValue - We don't rely on operator== working on double values, as
1775 /// it returns true for things that are clearly not equal, like -0.0 and 0.0.
1776 /// As such, this method can be used to do an exact bit-for-bit comparison of
1777 /// two floating point values.
1779 /// We leave the version with the double argument here because it's just so
1780 /// convenient to write "2.0" and the like. Without this function we'd
1781 /// have to duplicate its logic everywhere it's called.
1782 bool isExactlyValue(double V) const {
1784 // convert is not supported on this type
1785 if (&Value->getValueAPF().getSemantics() == &APFloat::PPCDoubleDouble)
1788 Tmp.convert(Value->getValueAPF().getSemantics(),
1789 APFloat::rmNearestTiesToEven, &ignored);
1790 return isExactlyValue(Tmp);
1792 bool isExactlyValue(const APFloat& V) const;
1794 bool isValueValidForType(EVT VT, const APFloat& Val);
1796 static bool classof(const ConstantFPSDNode *) { return true; }
1797 static bool classof(const SDNode *N) {
1798 return N->getOpcode() == ISD::ConstantFP ||
1799 N->getOpcode() == ISD::TargetConstantFP;
1803 class GlobalAddressSDNode : public SDNode {
1804 GlobalValue *TheGlobal;
1806 unsigned char TargetFlags;
1807 friend class SelectionDAG;
1808 GlobalAddressSDNode(unsigned Opc, const GlobalValue *GA, EVT VT,
1809 int64_t o, unsigned char TargetFlags);
1812 GlobalValue *getGlobal() const { return TheGlobal; }
1813 int64_t getOffset() const { return Offset; }
1814 unsigned char getTargetFlags() const { return TargetFlags; }
1815 // Return the address space this GlobalAddress belongs to.
1816 unsigned getAddressSpace() const;
1818 static bool classof(const GlobalAddressSDNode *) { return true; }
1819 static bool classof(const SDNode *N) {
1820 return N->getOpcode() == ISD::GlobalAddress ||
1821 N->getOpcode() == ISD::TargetGlobalAddress ||
1822 N->getOpcode() == ISD::GlobalTLSAddress ||
1823 N->getOpcode() == ISD::TargetGlobalTLSAddress;
1827 class FrameIndexSDNode : public SDNode {
1829 friend class SelectionDAG;
1830 FrameIndexSDNode(int fi, EVT VT, bool isTarg)
1831 : SDNode(isTarg ? ISD::TargetFrameIndex : ISD::FrameIndex,
1832 DebugLoc::getUnknownLoc(), getSDVTList(VT)), FI(fi) {
1836 int getIndex() const { return FI; }
1838 static bool classof(const FrameIndexSDNode *) { return true; }
1839 static bool classof(const SDNode *N) {
1840 return N->getOpcode() == ISD::FrameIndex ||
1841 N->getOpcode() == ISD::TargetFrameIndex;
1845 class JumpTableSDNode : public SDNode {
1847 unsigned char TargetFlags;
1848 friend class SelectionDAG;
1849 JumpTableSDNode(int jti, EVT VT, bool isTarg, unsigned char TF)
1850 : SDNode(isTarg ? ISD::TargetJumpTable : ISD::JumpTable,
1851 DebugLoc::getUnknownLoc(), getSDVTList(VT)), JTI(jti), TargetFlags(TF) {
1855 int getIndex() const { return JTI; }
1856 unsigned char getTargetFlags() const { return TargetFlags; }
1858 static bool classof(const JumpTableSDNode *) { return true; }
1859 static bool classof(const SDNode *N) {
1860 return N->getOpcode() == ISD::JumpTable ||
1861 N->getOpcode() == ISD::TargetJumpTable;
1865 class ConstantPoolSDNode : public SDNode {
1868 MachineConstantPoolValue *MachineCPVal;
1870 int Offset; // It's a MachineConstantPoolValue if top bit is set.
1871 unsigned Alignment; // Minimum alignment requirement of CP (not log2 value).
1872 unsigned char TargetFlags;
1873 friend class SelectionDAG;
1874 ConstantPoolSDNode(bool isTarget, Constant *c, EVT VT, int o, unsigned Align,
1876 : SDNode(isTarget ? ISD::TargetConstantPool : ISD::ConstantPool,
1877 DebugLoc::getUnknownLoc(),
1878 getSDVTList(VT)), Offset(o), Alignment(Align), TargetFlags(TF) {
1879 assert((int)Offset >= 0 && "Offset is too large");
1882 ConstantPoolSDNode(bool isTarget, MachineConstantPoolValue *v,
1883 EVT VT, int o, unsigned Align, unsigned char TF)
1884 : SDNode(isTarget ? ISD::TargetConstantPool : ISD::ConstantPool,
1885 DebugLoc::getUnknownLoc(),
1886 getSDVTList(VT)), Offset(o), Alignment(Align), TargetFlags(TF) {
1887 assert((int)Offset >= 0 && "Offset is too large");
1888 Val.MachineCPVal = v;
1889 Offset |= 1 << (sizeof(unsigned)*CHAR_BIT-1);
1894 bool isMachineConstantPoolEntry() const {
1895 return (int)Offset < 0;
1898 Constant *getConstVal() const {
1899 assert(!isMachineConstantPoolEntry() && "Wrong constantpool type");
1900 return Val.ConstVal;
1903 MachineConstantPoolValue *getMachineCPVal() const {
1904 assert(isMachineConstantPoolEntry() && "Wrong constantpool type");
1905 return Val.MachineCPVal;
1908 int getOffset() const {
1909 return Offset & ~(1 << (sizeof(unsigned)*CHAR_BIT-1));
1912 // Return the alignment of this constant pool object, which is either 0 (for
1913 // default alignment) or the desired value.
1914 unsigned getAlignment() const { return Alignment; }
1915 unsigned char getTargetFlags() const { return TargetFlags; }
1917 const Type *getType() const;
1919 static bool classof(const ConstantPoolSDNode *) { return true; }
1920 static bool classof(const SDNode *N) {
1921 return N->getOpcode() == ISD::ConstantPool ||
1922 N->getOpcode() == ISD::TargetConstantPool;
1926 class BasicBlockSDNode : public SDNode {
1927 MachineBasicBlock *MBB;
1928 friend class SelectionDAG;
1929 /// Debug info is meaningful and potentially useful here, but we create
1930 /// blocks out of order when they're jumped to, which makes it a bit
1931 /// harder. Let's see if we need it first.
1932 explicit BasicBlockSDNode(MachineBasicBlock *mbb)
1933 : SDNode(ISD::BasicBlock, DebugLoc::getUnknownLoc(),
1934 getSDVTList(MVT::Other)), MBB(mbb) {
1938 MachineBasicBlock *getBasicBlock() const { return MBB; }
1940 static bool classof(const BasicBlockSDNode *) { return true; }
1941 static bool classof(const SDNode *N) {
1942 return N->getOpcode() == ISD::BasicBlock;
1946 /// BuildVectorSDNode - A "pseudo-class" with methods for operating on
1948 class BuildVectorSDNode : public SDNode {
1949 // These are constructed as SDNodes and then cast to BuildVectorSDNodes.
1950 explicit BuildVectorSDNode(); // Do not implement
1952 /// isConstantSplat - Check if this is a constant splat, and if so, find the
1953 /// smallest element size that splats the vector. If MinSplatBits is
1954 /// nonzero, the element size must be at least that large. Note that the
1955 /// splat element may be the entire vector (i.e., a one element vector).
1956 /// Returns the splat element value in SplatValue. Any undefined bits in
1957 /// that value are zero, and the corresponding bits in the SplatUndef mask
1958 /// are set. The SplatBitSize value is set to the splat element size in
1959 /// bits. HasAnyUndefs is set to true if any bits in the vector are
1960 /// undefined. isBigEndian describes the endianness of the target.
1961 bool isConstantSplat(APInt &SplatValue, APInt &SplatUndef,
1962 unsigned &SplatBitSize, bool &HasAnyUndefs,
1963 unsigned MinSplatBits = 0, bool isBigEndian = false);
1965 static inline bool classof(const BuildVectorSDNode *) { return true; }
1966 static inline bool classof(const SDNode *N) {
1967 return N->getOpcode() == ISD::BUILD_VECTOR;
1971 /// SrcValueSDNode - An SDNode that holds an arbitrary LLVM IR Value. This is
1972 /// used when the SelectionDAG needs to make a simple reference to something
1973 /// in the LLVM IR representation.
1975 class SrcValueSDNode : public SDNode {
1977 friend class SelectionDAG;
1978 /// Create a SrcValue for a general value.
1979 explicit SrcValueSDNode(const Value *v)
1980 : SDNode(ISD::SRCVALUE, DebugLoc::getUnknownLoc(),
1981 getSDVTList(MVT::Other)), V(v) {}
1984 /// getValue - return the contained Value.
1985 const Value *getValue() const { return V; }
1987 static bool classof(const SrcValueSDNode *) { return true; }
1988 static bool classof(const SDNode *N) {
1989 return N->getOpcode() == ISD::SRCVALUE;
1994 class RegisterSDNode : public SDNode {
1996 friend class SelectionDAG;
1997 RegisterSDNode(unsigned reg, EVT VT)
1998 : SDNode(ISD::Register, DebugLoc::getUnknownLoc(),
1999 getSDVTList(VT)), Reg(reg) {
2003 unsigned getReg() const { return Reg; }
2005 static bool classof(const RegisterSDNode *) { return true; }
2006 static bool classof(const SDNode *N) {
2007 return N->getOpcode() == ISD::Register;
2011 class BlockAddressSDNode : public SDNode {
2013 unsigned char TargetFlags;
2014 friend class SelectionDAG;
2015 BlockAddressSDNode(unsigned NodeTy, EVT VT, BlockAddress *ba,
2016 unsigned char Flags)
2017 : SDNode(NodeTy, DebugLoc::getUnknownLoc(), getSDVTList(VT)),
2018 BA(ba), TargetFlags(Flags) {
2021 BlockAddress *getBlockAddress() const { return BA; }
2022 unsigned char getTargetFlags() const { return TargetFlags; }
2024 static bool classof(const BlockAddressSDNode *) { return true; }
2025 static bool classof(const SDNode *N) {
2026 return N->getOpcode() == ISD::BlockAddress ||
2027 N->getOpcode() == ISD::TargetBlockAddress;
2031 class LabelSDNode : public SDNode {
2034 friend class SelectionDAG;
2035 LabelSDNode(unsigned NodeTy, DebugLoc dl, SDValue ch, unsigned id)
2036 : SDNode(NodeTy, dl, getSDVTList(MVT::Other)), LabelID(id) {
2037 InitOperands(&Chain, ch);
2040 unsigned getLabelID() const { return LabelID; }
2042 static bool classof(const LabelSDNode *) { return true; }
2043 static bool classof(const SDNode *N) {
2044 return N->getOpcode() == ISD::EH_LABEL;
2048 class ExternalSymbolSDNode : public SDNode {
2050 unsigned char TargetFlags;
2052 friend class SelectionDAG;
2053 ExternalSymbolSDNode(bool isTarget, const char *Sym, unsigned char TF, EVT VT)
2054 : SDNode(isTarget ? ISD::TargetExternalSymbol : ISD::ExternalSymbol,
2055 DebugLoc::getUnknownLoc(),
2056 getSDVTList(VT)), Symbol(Sym), TargetFlags(TF) {
2060 const char *getSymbol() const { return Symbol; }
2061 unsigned char getTargetFlags() const { return TargetFlags; }
2063 static bool classof(const ExternalSymbolSDNode *) { return true; }
2064 static bool classof(const SDNode *N) {
2065 return N->getOpcode() == ISD::ExternalSymbol ||
2066 N->getOpcode() == ISD::TargetExternalSymbol;
2070 class CondCodeSDNode : public SDNode {
2071 ISD::CondCode Condition;
2072 friend class SelectionDAG;
2073 explicit CondCodeSDNode(ISD::CondCode Cond)
2074 : SDNode(ISD::CONDCODE, DebugLoc::getUnknownLoc(),
2075 getSDVTList(MVT::Other)), Condition(Cond) {
2079 ISD::CondCode get() const { return Condition; }
2081 static bool classof(const CondCodeSDNode *) { return true; }
2082 static bool classof(const SDNode *N) {
2083 return N->getOpcode() == ISD::CONDCODE;
2087 /// CvtRndSatSDNode - NOTE: avoid using this node as this may disappear in the
2088 /// future and most targets don't support it.
2089 class CvtRndSatSDNode : public SDNode {
2090 ISD::CvtCode CvtCode;
2091 friend class SelectionDAG;
2092 explicit CvtRndSatSDNode(EVT VT, DebugLoc dl, const SDValue *Ops,
2093 unsigned NumOps, ISD::CvtCode Code)
2094 : SDNode(ISD::CONVERT_RNDSAT, dl, getSDVTList(VT), Ops, NumOps),
2096 assert(NumOps == 5 && "wrong number of operations");
2099 ISD::CvtCode getCvtCode() const { return CvtCode; }
2101 static bool classof(const CvtRndSatSDNode *) { return true; }
2102 static bool classof(const SDNode *N) {
2103 return N->getOpcode() == ISD::CONVERT_RNDSAT;
2110 static const uint64_t NoFlagSet = 0ULL;
2111 static const uint64_t ZExt = 1ULL<<0; ///< Zero extended
2112 static const uint64_t ZExtOffs = 0;
2113 static const uint64_t SExt = 1ULL<<1; ///< Sign extended
2114 static const uint64_t SExtOffs = 1;
2115 static const uint64_t InReg = 1ULL<<2; ///< Passed in register
2116 static const uint64_t InRegOffs = 2;
2117 static const uint64_t SRet = 1ULL<<3; ///< Hidden struct-ret ptr
2118 static const uint64_t SRetOffs = 3;
2119 static const uint64_t ByVal = 1ULL<<4; ///< Struct passed by value
2120 static const uint64_t ByValOffs = 4;
2121 static const uint64_t Nest = 1ULL<<5; ///< Nested fn static chain
2122 static const uint64_t NestOffs = 5;
2123 static const uint64_t ByValAlign = 0xFULL << 6; //< Struct alignment
2124 static const uint64_t ByValAlignOffs = 6;
2125 static const uint64_t Split = 1ULL << 10;
2126 static const uint64_t SplitOffs = 10;
2127 static const uint64_t OrigAlign = 0x1FULL<<27;
2128 static const uint64_t OrigAlignOffs = 27;
2129 static const uint64_t ByValSize = 0xffffffffULL << 32; //< Struct size
2130 static const uint64_t ByValSizeOffs = 32;
2132 static const uint64_t One = 1ULL; //< 1 of this type, for shifts
2136 ArgFlagsTy() : Flags(0) { }
2138 bool isZExt() const { return Flags & ZExt; }
2139 void setZExt() { Flags |= One << ZExtOffs; }
2141 bool isSExt() const { return Flags & SExt; }
2142 void setSExt() { Flags |= One << SExtOffs; }
2144 bool isInReg() const { return Flags & InReg; }
2145 void setInReg() { Flags |= One << InRegOffs; }
2147 bool isSRet() const { return Flags & SRet; }
2148 void setSRet() { Flags |= One << SRetOffs; }
2150 bool isByVal() const { return Flags & ByVal; }
2151 void setByVal() { Flags |= One << ByValOffs; }
2153 bool isNest() const { return Flags & Nest; }
2154 void setNest() { Flags |= One << NestOffs; }
2156 unsigned getByValAlign() const {
2158 ((One << ((Flags & ByValAlign) >> ByValAlignOffs)) / 2);
2160 void setByValAlign(unsigned A) {
2161 Flags = (Flags & ~ByValAlign) |
2162 (uint64_t(Log2_32(A) + 1) << ByValAlignOffs);
2165 bool isSplit() const { return Flags & Split; }
2166 void setSplit() { Flags |= One << SplitOffs; }
2168 unsigned getOrigAlign() const {
2170 ((One << ((Flags & OrigAlign) >> OrigAlignOffs)) / 2);
2172 void setOrigAlign(unsigned A) {
2173 Flags = (Flags & ~OrigAlign) |
2174 (uint64_t(Log2_32(A) + 1) << OrigAlignOffs);
2177 unsigned getByValSize() const {
2178 return (unsigned)((Flags & ByValSize) >> ByValSizeOffs);
2180 void setByValSize(unsigned S) {
2181 Flags = (Flags & ~ByValSize) | (uint64_t(S) << ByValSizeOffs);
2184 /// getArgFlagsString - Returns the flags as a string, eg: "zext align:4".
2185 std::string getArgFlagsString();
2187 /// getRawBits - Represent the flags as a bunch of bits.
2188 uint64_t getRawBits() const { return Flags; }
2191 /// InputArg - This struct carries flags and type information about a
2192 /// single incoming (formal) argument or incoming (from the perspective
2193 /// of the caller) return value virtual register.
2200 InputArg() : VT(MVT::Other), Used(false) {}
2201 InputArg(ISD::ArgFlagsTy flags, EVT vt, bool used)
2202 : Flags(flags), VT(vt), Used(used) {
2203 assert(VT.isSimple() &&
2204 "InputArg value type must be Simple!");
2208 /// OutputArg - This struct carries flags and a value for a
2209 /// single outgoing (actual) argument or outgoing (from the perspective
2210 /// of the caller) return value virtual register.
2217 OutputArg() : IsFixed(false) {}
2218 OutputArg(ISD::ArgFlagsTy flags, SDValue val, bool isfixed)
2219 : Flags(flags), Val(val), IsFixed(isfixed) {
2220 assert(Val.getValueType().isSimple() &&
2221 "OutputArg value type must be Simple!");
2226 /// VTSDNode - This class is used to represent EVT's, which are used
2227 /// to parameterize some operations.
2228 class VTSDNode : public SDNode {
2230 friend class SelectionDAG;
2231 explicit VTSDNode(EVT VT)
2232 : SDNode(ISD::VALUETYPE, DebugLoc::getUnknownLoc(),
2233 getSDVTList(MVT::Other)), ValueType(VT) {
2237 EVT getVT() const { return ValueType; }
2239 static bool classof(const VTSDNode *) { return true; }
2240 static bool classof(const SDNode *N) {
2241 return N->getOpcode() == ISD::VALUETYPE;
2245 /// LSBaseSDNode - Base class for LoadSDNode and StoreSDNode
2247 class LSBaseSDNode : public MemSDNode {
2248 //! Operand array for load and store
2250 \note Moving this array to the base class captures more
2251 common functionality shared between LoadSDNode and
2256 LSBaseSDNode(ISD::NodeType NodeTy, DebugLoc dl, SDValue *Operands,
2257 unsigned numOperands, SDVTList VTs, ISD::MemIndexedMode AM,
2258 EVT MemVT, MachineMemOperand *MMO)
2259 : MemSDNode(NodeTy, dl, VTs, MemVT, MMO) {
2260 SubclassData |= AM << 2;
2261 assert(getAddressingMode() == AM && "MemIndexedMode encoding error!");
2262 InitOperands(Ops, Operands, numOperands);
2263 assert((getOffset().getOpcode() == ISD::UNDEF || isIndexed()) &&
2264 "Only indexed loads and stores have a non-undef offset operand");
2267 const SDValue &getOffset() const {
2268 return getOperand(getOpcode() == ISD::LOAD ? 2 : 3);
2271 /// getAddressingMode - Return the addressing mode for this load or store:
2272 /// unindexed, pre-inc, pre-dec, post-inc, or post-dec.
2273 ISD::MemIndexedMode getAddressingMode() const {
2274 return ISD::MemIndexedMode((SubclassData >> 2) & 7);
2277 /// isIndexed - Return true if this is a pre/post inc/dec load/store.
2278 bool isIndexed() const { return getAddressingMode() != ISD::UNINDEXED; }
2280 /// isUnindexed - Return true if this is NOT a pre/post inc/dec load/store.
2281 bool isUnindexed() const { return getAddressingMode() == ISD::UNINDEXED; }
2283 static bool classof(const LSBaseSDNode *) { return true; }
2284 static bool classof(const SDNode *N) {
2285 return N->getOpcode() == ISD::LOAD ||
2286 N->getOpcode() == ISD::STORE;
2290 /// LoadSDNode - This class is used to represent ISD::LOAD nodes.
2292 class LoadSDNode : public LSBaseSDNode {
2293 friend class SelectionDAG;
2294 LoadSDNode(SDValue *ChainPtrOff, DebugLoc dl, SDVTList VTs,
2295 ISD::MemIndexedMode AM, ISD::LoadExtType ETy, EVT MemVT,
2296 MachineMemOperand *MMO)
2297 : LSBaseSDNode(ISD::LOAD, dl, ChainPtrOff, 3,
2298 VTs, AM, MemVT, MMO) {
2299 SubclassData |= (unsigned short)ETy;
2300 assert(getExtensionType() == ETy && "LoadExtType encoding error!");
2301 assert(readMem() && "Load MachineMemOperand is not a load!");
2302 assert(!writeMem() && "Load MachineMemOperand is a store!");
2306 /// getExtensionType - Return whether this is a plain node,
2307 /// or one of the varieties of value-extending loads.
2308 ISD::LoadExtType getExtensionType() const {
2309 return ISD::LoadExtType(SubclassData & 3);
2312 const SDValue &getBasePtr() const { return getOperand(1); }
2313 const SDValue &getOffset() const { return getOperand(2); }
2315 static bool classof(const LoadSDNode *) { return true; }
2316 static bool classof(const SDNode *N) {
2317 return N->getOpcode() == ISD::LOAD;
2321 /// StoreSDNode - This class is used to represent ISD::STORE nodes.
2323 class StoreSDNode : public LSBaseSDNode {
2324 friend class SelectionDAG;
2325 StoreSDNode(SDValue *ChainValuePtrOff, DebugLoc dl, SDVTList VTs,
2326 ISD::MemIndexedMode AM, bool isTrunc, EVT MemVT,
2327 MachineMemOperand *MMO)
2328 : LSBaseSDNode(ISD::STORE, dl, ChainValuePtrOff, 4,
2329 VTs, AM, MemVT, MMO) {
2330 SubclassData |= (unsigned short)isTrunc;
2331 assert(isTruncatingStore() == isTrunc && "isTrunc encoding error!");
2332 assert(!readMem() && "Store MachineMemOperand is a load!");
2333 assert(writeMem() && "Store MachineMemOperand is not a store!");
2337 /// isTruncatingStore - Return true if the op does a truncation before store.
2338 /// For integers this is the same as doing a TRUNCATE and storing the result.
2339 /// For floats, it is the same as doing an FP_ROUND and storing the result.
2340 bool isTruncatingStore() const { return SubclassData & 1; }
2342 const SDValue &getValue() const { return getOperand(1); }
2343 const SDValue &getBasePtr() const { return getOperand(2); }
2344 const SDValue &getOffset() const { return getOperand(3); }
2346 static bool classof(const StoreSDNode *) { return true; }
2347 static bool classof(const SDNode *N) {
2348 return N->getOpcode() == ISD::STORE;
2352 /// MachineSDNode - An SDNode that represents everything that will be needed
2353 /// to construct a MachineInstr. These nodes are created during the
2354 /// instruction selection proper phase.
2356 class MachineSDNode : public SDNode {
2358 typedef MachineMemOperand **mmo_iterator;
2361 friend class SelectionDAG;
2362 MachineSDNode(unsigned Opc, const DebugLoc DL, SDVTList VTs)
2363 : SDNode(Opc, DL, VTs), MemRefs(0), MemRefsEnd(0) {}
2365 /// LocalOperands - Operands for this instruction, if they fit here. If
2366 /// they don't, this field is unused.
2367 SDUse LocalOperands[4];
2369 /// MemRefs - Memory reference descriptions for this instruction.
2370 mmo_iterator MemRefs;
2371 mmo_iterator MemRefsEnd;
2374 mmo_iterator memoperands_begin() const { return MemRefs; }
2375 mmo_iterator memoperands_end() const { return MemRefsEnd; }
2376 bool memoperands_empty() const { return MemRefsEnd == MemRefs; }
2378 /// setMemRefs - Assign this MachineSDNodes's memory reference descriptor
2379 /// list. This does not transfer ownership.
2380 void setMemRefs(mmo_iterator NewMemRefs, mmo_iterator NewMemRefsEnd) {
2381 MemRefs = NewMemRefs;
2382 MemRefsEnd = NewMemRefsEnd;
2385 static bool classof(const MachineSDNode *) { return true; }
2386 static bool classof(const SDNode *N) {
2387 return N->isMachineOpcode();
2391 class SDNodeIterator : public std::iterator<std::forward_iterator_tag,
2392 SDNode, ptrdiff_t> {
2396 SDNodeIterator(SDNode *N, unsigned Op) : Node(N), Operand(Op) {}
2398 bool operator==(const SDNodeIterator& x) const {
2399 return Operand == x.Operand;
2401 bool operator!=(const SDNodeIterator& x) const { return !operator==(x); }
2403 const SDNodeIterator &operator=(const SDNodeIterator &I) {
2404 assert(I.Node == Node && "Cannot assign iterators to two different nodes!");
2405 Operand = I.Operand;
2409 pointer operator*() const {
2410 return Node->getOperand(Operand).getNode();
2412 pointer operator->() const { return operator*(); }
2414 SDNodeIterator& operator++() { // Preincrement
2418 SDNodeIterator operator++(int) { // Postincrement
2419 SDNodeIterator tmp = *this; ++*this; return tmp;
2421 size_t operator-(SDNodeIterator Other) const {
2422 assert(Node == Other.Node &&
2423 "Cannot compare iterators of two different nodes!");
2424 return Operand - Other.Operand;
2427 static SDNodeIterator begin(SDNode *N) { return SDNodeIterator(N, 0); }
2428 static SDNodeIterator end (SDNode *N) {
2429 return SDNodeIterator(N, N->getNumOperands());
2432 unsigned getOperand() const { return Operand; }
2433 const SDNode *getNode() const { return Node; }
2436 template <> struct GraphTraits<SDNode*> {
2437 typedef SDNode NodeType;
2438 typedef SDNodeIterator ChildIteratorType;
2439 static inline NodeType *getEntryNode(SDNode *N) { return N; }
2440 static inline ChildIteratorType child_begin(NodeType *N) {
2441 return SDNodeIterator::begin(N);
2443 static inline ChildIteratorType child_end(NodeType *N) {
2444 return SDNodeIterator::end(N);
2448 /// LargestSDNode - The largest SDNode class.
2450 typedef LoadSDNode LargestSDNode;
2452 /// MostAlignedSDNode - The SDNode class with the greatest alignment
2455 typedef GlobalAddressSDNode MostAlignedSDNode;
2458 /// isNormalLoad - Returns true if the specified node is a non-extending
2459 /// and unindexed load.
2460 inline bool isNormalLoad(const SDNode *N) {
2461 const LoadSDNode *Ld = dyn_cast<LoadSDNode>(N);
2462 return Ld && Ld->getExtensionType() == ISD::NON_EXTLOAD &&
2463 Ld->getAddressingMode() == ISD::UNINDEXED;
2466 /// isNON_EXTLoad - Returns true if the specified node is a non-extending
2468 inline bool isNON_EXTLoad(const SDNode *N) {
2469 return isa<LoadSDNode>(N) &&
2470 cast<LoadSDNode>(N)->getExtensionType() == ISD::NON_EXTLOAD;
2473 /// isEXTLoad - Returns true if the specified node is a EXTLOAD.
2475 inline bool isEXTLoad(const SDNode *N) {
2476 return isa<LoadSDNode>(N) &&
2477 cast<LoadSDNode>(N)->getExtensionType() == ISD::EXTLOAD;
2480 /// isSEXTLoad - Returns true if the specified node is a SEXTLOAD.
2482 inline bool isSEXTLoad(const SDNode *N) {
2483 return isa<LoadSDNode>(N) &&
2484 cast<LoadSDNode>(N)->getExtensionType() == ISD::SEXTLOAD;
2487 /// isZEXTLoad - Returns true if the specified node is a ZEXTLOAD.
2489 inline bool isZEXTLoad(const SDNode *N) {
2490 return isa<LoadSDNode>(N) &&
2491 cast<LoadSDNode>(N)->getExtensionType() == ISD::ZEXTLOAD;
2494 /// isUNINDEXEDLoad - Returns true if the specified node is an unindexed load.
2496 inline bool isUNINDEXEDLoad(const SDNode *N) {
2497 return isa<LoadSDNode>(N) &&
2498 cast<LoadSDNode>(N)->getAddressingMode() == ISD::UNINDEXED;
2501 /// isNormalStore - Returns true if the specified node is a non-truncating
2502 /// and unindexed store.
2503 inline bool isNormalStore(const SDNode *N) {
2504 const StoreSDNode *St = dyn_cast<StoreSDNode>(N);
2505 return St && !St->isTruncatingStore() &&
2506 St->getAddressingMode() == ISD::UNINDEXED;
2509 /// isNON_TRUNCStore - Returns true if the specified node is a non-truncating
2511 inline bool isNON_TRUNCStore(const SDNode *N) {
2512 return isa<StoreSDNode>(N) && !cast<StoreSDNode>(N)->isTruncatingStore();
2515 /// isTRUNCStore - Returns true if the specified node is a truncating
2517 inline bool isTRUNCStore(const SDNode *N) {
2518 return isa<StoreSDNode>(N) && cast<StoreSDNode>(N)->isTruncatingStore();
2521 /// isUNINDEXEDStore - Returns true if the specified node is an
2522 /// unindexed store.
2523 inline bool isUNINDEXEDStore(const SDNode *N) {
2524 return isa<StoreSDNode>(N) &&
2525 cast<StoreSDNode>(N)->getAddressingMode() == ISD::UNINDEXED;
2530 } // end llvm namespace