Reordering items in scripts; fusing off the router's MAC address filter.

[pingpong.git] / Code / Projects / PacketLevelSignatureExtractor / execute_layer3_smarthome_all_detection.sh

diff --git a/Code/Projects/PacketLevelSignatureExtractor/execute_layer3_smarthome_all_detection.sh b/Code/Projects/PacketLevelSignatureExtractor/execute_layer3_smarthome_all_detection.sh
index 974d2f4eb3d975a0d863a700c3391f70d8a30cdc..8c0346fce534f4ce5a2d97ef4e3e9dcf7fc5e709 100755 (executable)
--- a/Code/Projects/PacketLevelSignatureExtractor/execute_layer3_smarthome_all_detection.sh
+++ b/Code/Projects/PacketLevelSignatureExtractor/execute_layer3_smarthome_all_detection.sh
@@ -17,6 +17,22 @@ readonly PCAPS_BASE_DIR
 SIGNATURES_BASE_DIR="$BASE_DIR/standalone"
 readonly SIGNATURES_BASE_DIR
 
 SIGNATURES_BASE_DIR="$BASE_DIR/standalone"
 readonly SIGNATURES_BASE_DIR
 

+# ==================================================== AMAZON PLUG =====================================================
+PCAP_FILE="$PCAPS_BASE_DIR/amazon-plug/eth0/amazon-plug.eth0.detection.pcap"
+
+# DEVICE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/amazon-plug/analyses/amazon-plug-onClusters-device-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/amazon-plug/analyses/amazon-plug-offClusters-device-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/amazon-plug/signatures/amazon-plug-onSignature-device-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/amazon-plug/signatures/amazon-plug-offSignature-device-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/amazon-plug/amazon-plug.eth0.detection.pcap___device-side.detectionresults"
+SIGNATURE_DURATION="4990"
+EPSILON="10.0"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
+./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+# ======================================================================================================================
+

 # ==================================================== ARLO CAMERA =====================================================
 PCAP_FILE="$PCAPS_BASE_DIR/arlo-camera/eth0/arlo-camera.eth0.detection.pcap"
 
 # ==================================================== ARLO CAMERA =====================================================
 PCAP_FILE="$PCAPS_BASE_DIR/arlo-camera/eth0/arlo-camera.eth0.detection.pcap"
 


@@ -35,8 +51,6 @@ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_
 #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 
 #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 

-
-

 # ================================================= BLOSSOM SPRINKLER ==================================================
 PCAP_FILE="$PCAPS_BASE_DIR/blossom-sprinkler/eth0/blossom-sprinkler.eth0.detection.pcap"
 
 # ================================================= BLOSSOM SPRINKLER ==================================================
 PCAP_FILE="$PCAPS_BASE_DIR/blossom-sprinkler/eth0/blossom-sprinkler.eth0.detection.pcap"
 


@@ -65,7 +79,21 @@ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_
 #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 
 #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 

+# ============================================== BLOSSOM SPRINKLER MODE ================================================
+PCAP_FILE="$PCAPS_BASE_DIR/blossom-sprinkler-mode/eth0/blossom-sprinkler-mode.eth0.detection.pcap"
+
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/blossom-sprinkler-mode/analyses/blossom-sprinkler-mode-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/blossom-sprinkler-mode/analyses/blossom-sprinkler-mode-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/blossom-sprinkler-mode/signatures/blossom-sprinkler-mode-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/blossom-sprinkler-mode/signatures/blossom-sprinkler-mode-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/blossom-sprinkler-mode/blossom-sprinkler-mode.eth0.detection.pcap___phone-side.detectionresults"
+SIGNATURE_DURATION="1977"
+EPSILON="10.0"

 
 

+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
+./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+# ======================================================================================================================

 
 # ==================================================== D-LINK PLUG =====================================================
 PCAP_FILE="$PCAPS_BASE_DIR/dlink-plug/eth0/dlink-plug.eth0.detection.pcap"
 
 # ==================================================== D-LINK PLUG =====================================================
 PCAP_FILE="$PCAPS_BASE_DIR/dlink-plug/eth0/dlink-plug.eth0.detection.pcap"


@@ -95,8 +123,6 @@ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_
 #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 
 #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 

-
-

 # ==================================================== D-LINK SIREN ====================================================
 PCAP_FILE="$PCAPS_BASE_DIR/dlink-siren/eth0/dlink-siren.eth0.detection.pcap"
 
 # ==================================================== D-LINK SIREN ====================================================
 PCAP_FILE="$PCAPS_BASE_DIR/dlink-siren/eth0/dlink-siren.eth0.detection.pcap"
 


@@ -113,7 +139,39 @@ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_
 #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 
 #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 

+# ================================================= ECOBEE THERMOSTAT ==================================================
+PCAP_FILE="$PCAPS_BASE_DIR/ecobee-thermostat/eth0/ecobee-thermostat.eth0.detection.pcap"
+
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/ecobee-thermostat/analyses/ecobee-thermostat-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/ecobee-thermostat/analyses/ecobee-thermostat-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/ecobee-thermostat/signatures/ecobee-thermostat-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/ecobee-thermostat/signatures/ecobee-thermostat-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/ecobee-thermostat/ecobee-thermostat.eth0.detection.pcap___phone-side.detectionresults"
+SIGNATURE_DURATION="733"
+EPSILON="10.0"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
+./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+
+# ======================================================================================================================
+
+# =============================================== ECOBEE THERMOSTAT FAN ================================================
+PCAP_FILE="$PCAPS_BASE_DIR/ecobee-thermostat-fan/eth0/ecobee-thermostat-fan.eth0.detection.pcap"
+
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/ecobee-thermostat-fan/analyses/ecobee-thermostat-fan-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/ecobee-thermostat-fan/analyses/ecobee-thermostat-fan-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/ecobee-thermostat-fan/signatures/ecobee-thermostat-fan-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/ecobee-thermostat-fan/signatures/ecobee-thermostat-fan-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/ecobee-thermostat-fan/ecobee-thermostat-fan.eth0.detection.pcap___phone-side.detectionresults"
+SIGNATURE_DURATION="1953"
+EPSILON="10.0"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
+./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"

 
 

+# ======================================================================================================================

 
 # ================================================= KWIKSET DOORLOCK ===================================================
 PCAP_FILE="$PCAPS_BASE_DIR/kwikset-doorlock/eth0/kwikset-doorlock.eth0.detection.pcap"
 
 # ================================================= KWIKSET DOORLOCK ===================================================
 PCAP_FILE="$PCAPS_BASE_DIR/kwikset-doorlock/eth0/kwikset-doorlock.eth0.detection.pcap"


@@ -133,8 +191,6 @@ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_
 #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 
 #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 

-
-

 # ================================================= NEST THERMOSTAT ====================================================
 PCAP_FILE="$PCAPS_BASE_DIR/nest-thermostat/eth0/nest-thermostat.eth0.detection.pcap"
 
 # ================================================= NEST THERMOSTAT ====================================================
 PCAP_FILE="$PCAPS_BASE_DIR/nest-thermostat/eth0/nest-thermostat.eth0.detection.pcap"
 


@@ -153,195 +209,70 @@ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_
 #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 
 #./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 

+# ================================================= RACHIO SPRINKLER ===================================================
+PCAP_FILE="$PCAPS_BASE_DIR/rachio-sprinkler/eth0/rachio-sprinkler.eth0.detection.pcap"

 
 

-
-# ====================================================== ST PLUG =======================================================
-PCAP_FILE="$PCAPS_BASE_DIR/st-plug/eth0/st-plug.eth0.detection.pcap"
-
-# Has no device side signature.
-
-# PHONE SIDE
-ON_ANALYSIS="$SIGNATURES_BASE_DIR/st-plug/analyses/st-plug-onClusters-phone-side.cls"
-OFF_ANALYSIS="$SIGNATURES_BASE_DIR/st-plug/analyses/st-plug-offClusters-phone-side.cls"
-ON_SIGNATURE="$SIGNATURES_BASE_DIR/st-plug/signatures/st-plug-onSignature-phone-side.sig"
-OFF_SIGNATURE="$SIGNATURES_BASE_DIR/st-plug/signatures/st-plug-offSignature-phone-side.sig"
-RESULTS_FILE="$OUTPUT_DIR/st-plug/st-plug.eth0.detection.pcap___phone-side.detectionresults"
-SIGNATURE_DURATION="2445"
-EPSILON="10.0"
-
-PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
-#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
-# ======================================================================================================================
-
-
-
-# ==================================================== TP-LINK BULB ====================================================
-PCAP_FILE="$PCAPS_BASE_DIR/tplink-bulb/wlan1/tplink-bulb.wlan1.detection.pcap"
-
-# Has no device side signature.
-
-# PHONE SIDE
-ON_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-bulb/analyses/tplink-bulb-onClusters-phone-side.cls"
-OFF_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-bulb/analyses/tplink-bulb-offClusters-phone-side.cls"
-ON_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-bulb/signatures/tplink-bulb-onSignature-phone-side.sig"
-OFF_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-bulb/signatures/tplink-bulb-offSignature-phone-side.sig"
-RESULTS_FILE="$OUTPUT_DIR/tplink-bulb/tplink-bulb.wlan1.wan-detection.pcap___phone-side.detectionresults"
-SIGNATURE_DURATION="162"
-EPSILON="10.0"
-
-PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
-#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
-# ======================================================================================================================
-
-
-
-# ==================================================== TP-LINK PLUG ====================================================
-PCAP_FILE="$PCAPS_BASE_DIR/tplink-plug/wlan1/tplink-plug.wlan1.detection.pcap"
-
-# DEVICE SIDE (both the 112, 115 and 556, 1293 sequences)
-ON_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-plug/analyses/tplink-plug-onClusters-device-side.cls"
-OFF_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-plug/analyses/tplink-plug-offClusters-device-side.cls"
-ON_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-plug/signatures/tplink-plug-onSignature-device-side.sig"
-OFF_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-plug/signatures/tplink-plug-offSignature-device-side.sig"
-RESULTS_FILE="$OUTPUT_DIR/tplink-plug/tplink-plug.wlan1.wan-detection.pcap___device-side.detectionresults"
-SIGNATURE_DURATION="3660"
-EPSILON="10.0"
-
-PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
-#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
-
-PCAP_FILE="$PCAPS_BASE_DIR/tplink-plug/eth0/tplink-plug.eth0.detection.pcap"
-
-# DEVICE SIDE OUTBOUND (contains only those packets that go through the WAN port, i.e., only the 556, 1293 sequence)
-ON_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-plug/analyses/tplink-plug-onClusters-device-side.cls"
-OFF_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-plug/analyses/tplink-plug-offClusters-device-side.cls"
-ON_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-plug/signatures/tplink-plug-onSignature-device-side-outbound.sig"
-OFF_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-plug/signatures/tplink-plug-offSignature-device-side-outbound.sig"
-RESULTS_FILE="$OUTPUT_DIR/tplink-plug/tplink-plug.eth0.detection.pcap___device-side-outbound.detectionresults"
-SIGNATURE_DURATION="224"
-EPSILON="10.0"
-
-PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
-#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
-
-# Phone side does not make sense as it is merely a subset of the device side and does not differentiate ONs from OFFs.
-# ======================================================================================================================
-
-
-
-# ================================================== WEMO INSIGHT PLUG =================================================
-PCAP_FILE="$PCAPS_BASE_DIR/wemo-insight-plug/wlan1/wemo-insight-plug.wlan1.detection.pcap"
-
-# Has no device side signature.
-
-# PHONE SIDE
-ON_ANALYSIS="$SIGNATURES_BASE_DIR/wemo-insight-plug/analyses/wemo-insight-plug-onClusters-phone-side.cls"
-OFF_ANALYSIS="$SIGNATURES_BASE_DIR/wemo-insight-plug/analyses/wemo-insight-plug-offClusters-phone-side.cls"
-ON_SIGNATURE="$SIGNATURES_BASE_DIR/wemo-insight-plug/signatures/wemo-insight-plug-onSignature-phone-side.sig"
-OFF_SIGNATURE="$SIGNATURES_BASE_DIR/wemo-insight-plug/signatures/wemo-insight-plug-offSignature-phone-side.sig"
-RESULTS_FILE="$OUTPUT_DIR/wemo-insight-plug/wemo-insight-plug.wlan1.wan-detection.pcap___phone-side.detectionresults"
-SIGNATURE_DURATION="106"
-EPSILON="10.0"
-
-PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
-#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
-# ======================================================================================================================
-
-
-
-# ===================================================== WEMO PLUG ======================================================
-PCAP_FILE="$PCAPS_BASE_DIR/wemo-plug/wlan1/wemo-plug.wlan1.detection.pcap"
-
-# Has no device side signature.
-
-# PHONE SIDE
-ON_ANALYSIS="$SIGNATURES_BASE_DIR/wemo-plug/analyses/wemo-plug-onClusters-phone-side.cls"
-OFF_ANALYSIS="$SIGNATURES_BASE_DIR/wemo-plug/analyses/wemo-plug-offClusters-phone-side.cls"
-ON_SIGNATURE="$SIGNATURES_BASE_DIR/wemo-plug/signatures/wemo-plug-onSignature-phone-side.sig"
-OFF_SIGNATURE="$SIGNATURES_BASE_DIR/wemo-plug/signatures/wemo-plug-offSignature-phone-side.sig"
-RESULTS_FILE="$OUTPUT_DIR/wemo-plug/wemo-plug.wlan1.wan-detection.pcap___phone-side.detectionresults"
-SIGNATURE_DURATION="147"
-EPSILON="10.0"
-
-PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
-#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
-# ======================================================================================================================
-
-
-
-# NEW DEVICES
-# ================================================ TP-LINK BULB COLOR ==================================================
-PCAP_FILE="$PCAPS_BASE_DIR/tplink-bulb-color/wlan1/tplink-bulb-color.wlan1.detection.pcap"
-
-# Has no device side signature.
-
-# PHONE SIDE
-ON_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-bulb-color/analyses/tplink-bulb-color-onClusters-phone-side.cls"
-OFF_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-bulb-color/analyses/tplink-bulb-color-offClusters-phone-side.cls"
-ON_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-bulb-color/signatures/tplink-bulb-color-onSignature-phone-side.sig"
-OFF_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-bulb-color/signatures/tplink-bulb-color-offSignature-phone-side.sig"
-RESULTS_FILE="$OUTPUT_DIR/tplink-bulb-color/tplink-bulb-color.wlan1.wan-detection.pcap___phone-side.detectionresults"
-SIGNATURE_DURATION="191"
+# DEVICE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/rachio-sprinkler/analyses/rachio-sprinkler-onClusters-device-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/rachio-sprinkler/analyses/rachio-sprinkler-offClusters-device-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/rachio-sprinkler/signatures/rachio-sprinkler-onSignature-device-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/rachio-sprinkler/signatures/rachio-sprinkler-offSignature-device-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/rachio-sprinkler/rachio-sprinkler.eth0.detection.pcap___device-side.detectionresults"
+SIGNATURE_DURATION="2695"

 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
 ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 
 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
 ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 

+# =============================================== RACHIO SPRINKLER STANDBY =============================================
+PCAP_FILE="$PCAPS_BASE_DIR/rachio-sprinkler-standby/eth0/rachio-sprinkler-standby.eth0.detection.pcap"

 
 

-# ============================================== TP-LINK BULB INTENSITY ================================================
-PCAP_FILE="$PCAPS_BASE_DIR/tplink-bulb-intensity/wlan1/tplink-bulb-intensity.wlan1.detection.pcap"
-
-# Has no device side signature.
-
-# PHONE SIDE
-ON_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-bulb-intensity/analyses/tplink-bulb-intensity-onClusters-phone-side.cls"
-OFF_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-bulb-intensity/analyses/tplink-bulb-intensity-offClusters-phone-side.cls"
-ON_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-bulb-intensity/signatures/tplink-bulb-intensity-onSignature-phone-side.sig"
-OFF_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-bulb-intensity/signatures/tplink-bulb-intensity-offSignature-phone-side.sig"
-RESULTS_FILE="$OUTPUT_DIR/tplink-bulb-intensity/tplink-bulb-intensity.wlan1.wan-detection.pcap___phone-side.detectionresults"
-SIGNATURE_DURATION="209"
+# DEVICE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/rachio-sprinkler-standby/analyses/rachio-sprinkler-standby-onClusters-device-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/rachio-sprinkler-standby/analyses/rachio-sprinkler-standby-offClusters-device-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/rachio-sprinkler-standby/signatures/rachio-sprinkler-standby-onSignature-device-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/rachio-sprinkler-standby/signatures/rachio-sprinkler-standby-offSignature-device-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/rachio-sprinkler-standby/rachio-sprinkler-standby.eth0.detection.pcap___device-side.detectionresults"
+SIGNATURE_DURATION="2791"

 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
 ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 
 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
 ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 

+# ===================================================== RING ALARM =====================================================
+PCAP_FILE="$PCAPS_BASE_DIR/ring-alarm/eth0/ring-alarm.eth0.detection.pcap"

 
 

-# ============================================== BLOSSOM SPRINKLER MODE ================================================
-PCAP_FILE="$PCAPS_BASE_DIR/blossom-sprinkler-mode/eth0/blossom-sprinkler-mode.eth0.detection.pcap"
-
-# PHONE SIDE
-ON_ANALYSIS="$SIGNATURES_BASE_DIR/blossom-sprinkler-mode/analyses/blossom-sprinkler-mode-onClusters-phone-side.cls"
-OFF_ANALYSIS="$SIGNATURES_BASE_DIR/blossom-sprinkler-mode/analyses/blossom-sprinkler-mode-offClusters-phone-side.cls"
-ON_SIGNATURE="$SIGNATURES_BASE_DIR/blossom-sprinkler-mode/signatures/blossom-sprinkler-mode-onSignature-phone-side.sig"
-OFF_SIGNATURE="$SIGNATURES_BASE_DIR/blossom-sprinkler-mode/signatures/blossom-sprinkler-mode-offSignature-phone-side.sig"
-RESULTS_FILE="$OUTPUT_DIR/blossom-sprinkler-mode/blossom-sprinkler-mode.eth0.detection.pcap___phone-side.detectionresults"
-SIGNATURE_DURATION="1977"
+# DEVICE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/ring-alarm/analyses/ring-alarm-onClusters-device-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/ring-alarm/analyses/ring-alarm-offClusters-device-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/ring-alarm/signatures/ring-alarm-onSignature-device-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/ring-alarm/signatures/ring-alarm-offSignature-device-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/ring-alarm/ring-alarm.eth0.detection.pcap___device-side.detectionresults"
+SIGNATURE_DURATION="665"

 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
 ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 
 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
 ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 

+# ================================================= ROOMBA VACUUM ROBOT ================================================
+PCAP_FILE="$PCAPS_BASE_DIR/roomba-vacuum-robot/eth0/roomba-vacuum-robot.eth0.detection.pcap"

 
 

-# ==================================================== AMAZON PLUG =====================================================
-PCAP_FILE="$PCAPS_BASE_DIR/amazon-plug/eth0/amazon-plug.eth0.detection.pcap"
-
-# DEVICE SIDE
-ON_ANALYSIS="$SIGNATURES_BASE_DIR/amazon-plug/analyses/amazon-plug-onClusters-device-side.cls"
-OFF_ANALYSIS="$SIGNATURES_BASE_DIR/amazon-plug/analyses/amazon-plug-offClusters-device-side.cls"
-ON_SIGNATURE="$SIGNATURES_BASE_DIR/amazon-plug/signatures/amazon-plug-onSignature-device-side.sig"
-OFF_SIGNATURE="$SIGNATURES_BASE_DIR/amazon-plug/signatures/amazon-plug-offSignature-device-side.sig"
-RESULTS_FILE="$OUTPUT_DIR/amazon-plug/amazon-plug.eth0.detection.pcap___device-side.detectionresults"
-SIGNATURE_DURATION="4990"
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/roomba-vacuum-robot/analyses/roomba-vacuum-robot-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/roomba-vacuum-robot/analyses/roomba-vacuum-robot-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/roomba-vacuum-robot/signatures/roomba-vacuum-robot-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/roomba-vacuum-robot/signatures/roomba-vacuum-robot-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/roomba-vacuum-robot/roomba-vacuum-robot.eth0.detection.pcap___phone-side.detectionresults"
+SIGNATURE_DURATION="5959"

 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
 ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 
 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
 ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 

-

 # =================================================== SENGLED BULB =====================================================
 PCAP_FILE="$PCAPS_BASE_DIR/sengled-bulb/eth0/sengled-bulb.eth0.detection.pcap"
 
 # =================================================== SENGLED BULB =====================================================
 PCAP_FILE="$PCAPS_BASE_DIR/sengled-bulb/eth0/sengled-bulb.eth0.detection.pcap"
 


@@ -370,7 +301,6 @@ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_
 ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 
 ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 

-

 # =============================================== SENGLED BULB INTENSITY ===============================================
 PCAP_FILE="$PCAPS_BASE_DIR/sengled-bulb-intensity/eth0/sengled-bulb-intensity.eth0.detection.pcap"
 
 # =============================================== SENGLED BULB INTENSITY ===============================================
 PCAP_FILE="$PCAPS_BASE_DIR/sengled-bulb-intensity/eth0/sengled-bulb-intensity.eth0.detection.pcap"
 


@@ -399,103 +329,142 @@ PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_
 ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 
 ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 

+# ====================================================== ST PLUG =======================================================
+PCAP_FILE="$PCAPS_BASE_DIR/st-plug/eth0/st-plug.eth0.detection.pcap"

 
 

-# ================================================= ECOBEE THERMOSTAT ==================================================
-PCAP_FILE="$PCAPS_BASE_DIR/ecobee-thermostat/eth0/ecobee-thermostat.eth0.detection.pcap"
+# Has no device side signature.

 
 # PHONE SIDE
 
 # PHONE SIDE

-ON_ANALYSIS="$SIGNATURES_BASE_DIR/ecobee-thermostat/analyses/ecobee-thermostat-onClusters-phone-side.cls"
-OFF_ANALYSIS="$SIGNATURES_BASE_DIR/ecobee-thermostat/analyses/ecobee-thermostat-offClusters-phone-side.cls"
-ON_SIGNATURE="$SIGNATURES_BASE_DIR/ecobee-thermostat/signatures/ecobee-thermostat-onSignature-phone-side.sig"
-OFF_SIGNATURE="$SIGNATURES_BASE_DIR/ecobee-thermostat/signatures/ecobee-thermostat-offSignature-phone-side.sig"
-RESULTS_FILE="$OUTPUT_DIR/ecobee-thermostat/ecobee-thermostat.eth0.detection.pcap___phone-side.detectionresults"
-SIGNATURE_DURATION="733"
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/st-plug/analyses/st-plug-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/st-plug/analyses/st-plug-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/st-plug/signatures/st-plug-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/st-plug/signatures/st-plug-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/st-plug/st-plug.eth0.detection.pcap___phone-side.detectionresults"
+SIGNATURE_DURATION="2445"

 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"

-./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+# ======================================================================================================================
+
+# ==================================================== TP-LINK BULB ====================================================
+PCAP_FILE="$PCAPS_BASE_DIR/tplink-bulb/wlan1/tplink-bulb.wlan1.detection.pcap"
+
+# Has no device side signature.
+
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-bulb/analyses/tplink-bulb-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-bulb/analyses/tplink-bulb-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-bulb/signatures/tplink-bulb-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-bulb/signatures/tplink-bulb-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/tplink-bulb/tplink-bulb.wlan1.wan-detection.pcap___phone-side.detectionresults"
+SIGNATURE_DURATION="162"
+EPSILON="10.0"

 
 

+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"

 # ======================================================================================================================
 
 # ======================================================================================================================
 

+# ================================================ TP-LINK BULB COLOR ==================================================
+PCAP_FILE="$PCAPS_BASE_DIR/tplink-bulb-color/wlan1/tplink-bulb-color.wlan1.detection.pcap"

 
 

-# =============================================== ECOBEE THERMOSTAT FAN ================================================
-PCAP_FILE="$PCAPS_BASE_DIR/ecobee-thermostat-fan/eth0/ecobee-thermostat-fan.eth0.detection.pcap"
+# Has no device side signature.

 
 # PHONE SIDE
 
 # PHONE SIDE

-ON_ANALYSIS="$SIGNATURES_BASE_DIR/ecobee-thermostat-fan/analyses/ecobee-thermostat-fan-onClusters-phone-side.cls"
-OFF_ANALYSIS="$SIGNATURES_BASE_DIR/ecobee-thermostat-fan/analyses/ecobee-thermostat-fan-offClusters-phone-side.cls"
-ON_SIGNATURE="$SIGNATURES_BASE_DIR/ecobee-thermostat-fan/signatures/ecobee-thermostat-fan-onSignature-phone-side.sig"
-OFF_SIGNATURE="$SIGNATURES_BASE_DIR/ecobee-thermostat-fan/signatures/ecobee-thermostat-fan-offSignature-phone-side.sig"
-RESULTS_FILE="$OUTPUT_DIR/ecobee-thermostat-fan/ecobee-thermostat-fan.eth0.detection.pcap___phone-side.detectionresults"
-SIGNATURE_DURATION="1953"
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-bulb-color/analyses/tplink-bulb-color-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-bulb-color/analyses/tplink-bulb-color-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-bulb-color/signatures/tplink-bulb-color-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-bulb-color/signatures/tplink-bulb-color-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/tplink-bulb-color/tplink-bulb-color.wlan1.wan-detection.pcap___phone-side.detectionresults"
+SIGNATURE_DURATION="191"

 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
 ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
 ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"

-

 # ======================================================================================================================
 
 # ======================================================================================================================
 

+# ============================================== TP-LINK BULB INTENSITY ================================================
+PCAP_FILE="$PCAPS_BASE_DIR/tplink-bulb-intensity/wlan1/tplink-bulb-intensity.wlan1.detection.pcap"

 
 

-# ================================================= RACHIO SPRINKLER ===================================================
-PCAP_FILE="$PCAPS_BASE_DIR/rachio-sprinkler/eth0/rachio-sprinkler.eth0.detection.pcap"
+# Has no device side signature.

 
 

-# DEVICE SIDE
-ON_ANALYSIS="$SIGNATURES_BASE_DIR/rachio-sprinkler/analyses/rachio-sprinkler-onClusters-device-side.cls"
-OFF_ANALYSIS="$SIGNATURES_BASE_DIR/rachio-sprinkler/analyses/rachio-sprinkler-offClusters-device-side.cls"
-ON_SIGNATURE="$SIGNATURES_BASE_DIR/rachio-sprinkler/signatures/rachio-sprinkler-onSignature-device-side.sig"
-OFF_SIGNATURE="$SIGNATURES_BASE_DIR/rachio-sprinkler/signatures/rachio-sprinkler-offSignature-device-side.sig"
-RESULTS_FILE="$OUTPUT_DIR/rachio-sprinkler/rachio-sprinkler.eth0.detection.pcap___device-side.detectionresults"
-SIGNATURE_DURATION="2695"
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-bulb-intensity/analyses/tplink-bulb-intensity-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-bulb-intensity/analyses/tplink-bulb-intensity-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-bulb-intensity/signatures/tplink-bulb-intensity-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-bulb-intensity/signatures/tplink-bulb-intensity-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/tplink-bulb-intensity/tplink-bulb-intensity.wlan1.wan-detection.pcap___phone-side.detectionresults"
+SIGNATURE_DURATION="209"

 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
 ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 
 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
 ./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
 # ======================================================================================================================
 

-# =============================================== RACHIO SPRINKLER STANDBY =============================================
-PCAP_FILE="$PCAPS_BASE_DIR/rachio-sprinkler-standby/eth0/rachio-sprinkler-standby.eth0.detection.pcap"
+# ==================================================== TP-LINK PLUG ====================================================
+PCAP_FILE="$PCAPS_BASE_DIR/tplink-plug/wlan1/tplink-plug.wlan1.detection.pcap"

 
 

-# DEVICE SIDE
-ON_ANALYSIS="$SIGNATURES_BASE_DIR/rachio-sprinkler-standby/analyses/rachio-sprinkler-standby-onClusters-device-side.cls"
-OFF_ANALYSIS="$SIGNATURES_BASE_DIR/rachio-sprinkler-standby/analyses/rachio-sprinkler-standby-offClusters-device-side.cls"
-ON_SIGNATURE="$SIGNATURES_BASE_DIR/rachio-sprinkler-standby/signatures/rachio-sprinkler-standby-onSignature-device-side.sig"
-OFF_SIGNATURE="$SIGNATURES_BASE_DIR/rachio-sprinkler-standby/signatures/rachio-sprinkler-standby-offSignature-device-side.sig"
-RESULTS_FILE="$OUTPUT_DIR/rachio-sprinkler-standby/rachio-sprinkler-standby.eth0.detection.pcap___device-side.detectionresults"
-SIGNATURE_DURATION="2791"
+# DEVICE SIDE (both the 112, 115 and 556, 1293 sequences)
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-plug/analyses/tplink-plug-onClusters-device-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-plug/analyses/tplink-plug-offClusters-device-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-plug/signatures/tplink-plug-onSignature-device-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-plug/signatures/tplink-plug-offSignature-device-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/tplink-plug/tplink-plug.wlan1.wan-detection.pcap___device-side.detectionresults"
+SIGNATURE_DURATION="3660"

 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"

-./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+
+PCAP_FILE="$PCAPS_BASE_DIR/tplink-plug/eth0/tplink-plug.eth0.detection.pcap"
+
+# DEVICE SIDE OUTBOUND (contains only those packets that go through the WAN port, i.e., only the 556, 1293 sequence)
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-plug/analyses/tplink-plug-onClusters-device-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/tplink-plug/analyses/tplink-plug-offClusters-device-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-plug/signatures/tplink-plug-onSignature-device-side-outbound.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/tplink-plug/signatures/tplink-plug-offSignature-device-side-outbound.sig"
+RESULTS_FILE="$OUTPUT_DIR/tplink-plug/tplink-plug.eth0.detection.pcap___device-side-outbound.detectionresults"
+SIGNATURE_DURATION="224"
+EPSILON="10.0"
+
+PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+
+# Phone side does not make sense as it is merely a subset of the device side and does not differentiate ONs from OFFs.

 # ======================================================================================================================
 
 # ======================================================================================================================
 

-# ================================================= ROOMBA VACUUM ROBOT ================================================
-PCAP_FILE="$PCAPS_BASE_DIR/roomba-vacuum-robot/eth0/roomba-vacuum-robot.eth0.detection.pcap"
+# ================================================== WEMO INSIGHT PLUG =================================================
+PCAP_FILE="$PCAPS_BASE_DIR/wemo-insight-plug/wlan1/wemo-insight-plug.wlan1.detection.pcap"
+
+# Has no device side signature.

 
 # PHONE SIDE
 
 # PHONE SIDE

-ON_ANALYSIS="$SIGNATURES_BASE_DIR/roomba-vacuum-robot/analyses/roomba-vacuum-robot-onClusters-phone-side.cls"
-OFF_ANALYSIS="$SIGNATURES_BASE_DIR/roomba-vacuum-robot/analyses/roomba-vacuum-robot-offClusters-phone-side.cls"
-ON_SIGNATURE="$SIGNATURES_BASE_DIR/roomba-vacuum-robot/signatures/roomba-vacuum-robot-onSignature-phone-side.sig"
-OFF_SIGNATURE="$SIGNATURES_BASE_DIR/roomba-vacuum-robot/signatures/roomba-vacuum-robot-offSignature-phone-side.sig"
-RESULTS_FILE="$OUTPUT_DIR/roomba-vacuum-robot/roomba-vacuum-robot.eth0.detection.pcap___phone-side.detectionresults"
-SIGNATURE_DURATION="5959"
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/wemo-insight-plug/analyses/wemo-insight-plug-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/wemo-insight-plug/analyses/wemo-insight-plug-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/wemo-insight-plug/signatures/wemo-insight-plug-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/wemo-insight-plug/signatures/wemo-insight-plug-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/wemo-insight-plug/wemo-insight-plug.wlan1.wan-detection.pcap___phone-side.detectionresults"
+SIGNATURE_DURATION="106"

 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"

-./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"

 # ======================================================================================================================
 
 # ======================================================================================================================
 

-# ===================================================== RING ALARM =====================================================
-PCAP_FILE="$PCAPS_BASE_DIR/ring-alarm/eth0/ring-alarm.eth0.detection.pcap"
+# ===================================================== WEMO PLUG ======================================================
+PCAP_FILE="$PCAPS_BASE_DIR/wemo-plug/wlan1/wemo-plug.wlan1.detection.pcap"

 
 

-# DEVICE SIDE
-ON_ANALYSIS="$SIGNATURES_BASE_DIR/ring-alarm/analyses/ring-alarm-onClusters-device-side.cls"
-OFF_ANALYSIS="$SIGNATURES_BASE_DIR/ring-alarm/analyses/ring-alarm-offClusters-device-side.cls"
-ON_SIGNATURE="$SIGNATURES_BASE_DIR/ring-alarm/signatures/ring-alarm-onSignature-device-side.sig"
-OFF_SIGNATURE="$SIGNATURES_BASE_DIR/ring-alarm/signatures/ring-alarm-offSignature-device-side.sig"
-RESULTS_FILE="$OUTPUT_DIR/ring-alarm/ring-alarm.eth0.detection.pcap___device-side.detectionresults"
-SIGNATURE_DURATION="665"
+# Has no device side signature.
+
+# PHONE SIDE
+ON_ANALYSIS="$SIGNATURES_BASE_DIR/wemo-plug/analyses/wemo-plug-onClusters-phone-side.cls"
+OFF_ANALYSIS="$SIGNATURES_BASE_DIR/wemo-plug/analyses/wemo-plug-offClusters-phone-side.cls"
+ON_SIGNATURE="$SIGNATURES_BASE_DIR/wemo-plug/signatures/wemo-plug-onSignature-phone-side.sig"
+OFF_SIGNATURE="$SIGNATURES_BASE_DIR/wemo-plug/signatures/wemo-plug-offSignature-phone-side.sig"
+RESULTS_FILE="$OUTPUT_DIR/wemo-plug/wemo-plug.wlan1.wan-detection.pcap___phone-side.detectionresults"
+SIGNATURE_DURATION="147"

 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"
 EPSILON="10.0"
 
 PROGRAM_ARGS="'$PCAP_FILE' '$ON_ANALYSIS' '$OFF_ANALYSIS' '$ON_SIGNATURE' '$OFF_SIGNATURE' '$RESULTS_FILE' '$SIGNATURE_DURATION' '$EPSILON'"

-./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"
+#./gradlew run -DmainClass=edu.uci.iotproject.detection.layer3.Layer3SignatureDetector --args="$PROGRAM_ARGS"

 # ======================================================================================================================
\ No newline at end of file
 # ======================================================================================================================
\ No newline at end of file