From: Eric Christopher <echristo@apple.com>
Date: Fri, 3 Aug 2012 19:47:14 +0000 (+0000)
Subject: Add a configure option to pass -std=c++11 on the command line.
X-Git-Url: http://plrg.eecs.uci.edu/git/?p=oota-llvm.git;a=commitdiff_plain;h=82120023861a85427f436dcb6f21a741e32a7896

Add a configure option to pass -std=c++11 on the command line.

rdar://11366674

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161251 91177308-0d34-0410-b5e6-96231b3b80d8
---

diff --git a/Makefile.config.in b/Makefile.config.in
index cc538b3f42e..6a35ae1a7d6 100644
--- a/Makefile.config.in
+++ b/Makefile.config.in
@@ -218,6 +218,9 @@ RDYNAMIC := @RDYNAMIC@
 #ENABLE_LIBCPP = 0
 ENABLE_LIBCPP = @ENABLE_LIBCPP@
 
+# When ENABLE_CXX11 is enabled, LLVM uses c++11 mode by default to build.
+ENABLE_CXX11 = @ENABLE_CXX11@
+
 # When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put
 # into the "Release" directories. Otherwise, LLVM code is not optimized and
 # output is put in the "Debug" directories.
diff --git a/Makefile.rules b/Makefile.rules
index 644c356370d..ebbaba8facf 100644
--- a/Makefile.rules
+++ b/Makefile.rules
@@ -317,6 +317,10 @@ ifeq ($(ENABLE_LIBCPP),1)
   LD.Flags +=  -stdlib=libc++
 endif
 
+ifeq ($(ENABLE_CXX11),1)
+  CXX.Flags += -std=c++11
+endif
+
 ifeq ($(ENABLE_PROFILING),1)
   BuildMode := $(BuildMode)+Profile
   CXX.Flags := $(filter-out -fomit-frame-pointer,$(CXX.Flags)) -pg -g
diff --git a/autoconf/configure.ac b/autoconf/configure.ac
index 7d36a06f14b..48ebc62255c 100644
--- a/autoconf/configure.ac
+++ b/autoconf/configure.ac
@@ -463,6 +463,18 @@ case "$enableval" in
   *) AC_MSG_ERROR([Invalid setting for --enable-libcpp. Use "yes" or "no"]) ;;
 esac
 
+dnl --enable-cxx11 : check whether or not to use -std=c++11 on the command line
+AC_ARG_ENABLE(cxx11,
+              AS_HELP_STRING([--enable-cxx11],
+                             [Use c++11 if available (default is NO)]),,
+                             enableval=default)
+case "$enableval" in
+  yes) AC_SUBST(ENABLE_CXX11,[1]) ;;
+  no)  AC_SUBST(ENABLE_CXX11,[0]) ;;
+  default) AC_SUBST(ENABLE_CXX11,[0]);;
+  *) AC_MSG_ERROR([Invalid setting for --enable-cxx11. Use "yes" or "no"]) ;;
+esac
+
 dnl --enable-optimized : check whether they want to do an optimized build:
 AC_ARG_ENABLE(optimized, AS_HELP_STRING(
  --enable-optimized,[Compile with optimizations enabled (default is NO)]),,enableval=$optimize)
diff --git a/configure b/configure
index fcd9179d35e..857d4608433 100755
--- a/configure
+++ b/configure
@@ -684,6 +684,7 @@ BUILD_EXEEXT
 BUILD_CXX
 CVSBUILD
 ENABLE_LIBCPP
+ENABLE_CXX11
 ENABLE_OPTIMIZED
 ENABLE_PROFILING
 DISABLE_ASSERTIONS
@@ -1390,6 +1391,7 @@ Optional Features:
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
   --enable-polly          Use polly if available (default is YES)
   --enable-libcpp         Use libc++ if available (default is NO)
+  --enable-cxx11          Use c++11 if available (default is NO)
   --enable-optimized      Compile with optimizations enabled (default is NO)
   --enable-profiling      Compile with profiling enabled (default is NO)
   --enable-assertions     Compile with assertion checks enabled (default is
@@ -5016,6 +5018,25 @@ echo "$as_me: error: Invalid setting for --enable-libcpp. Use \"yes\" or \"no\""
    { (exit 1); exit 1; }; } ;;
 esac
 
+# Check whether --enable-cxx11 was given.
+if test "${enable_cxx11+set}" = set; then
+  enableval=$enable_cxx11;
+else
+  enableval=default
+fi
+
+case "$enableval" in
+  yes) ENABLE_CXX11=1
+ ;;
+  no)  ENABLE_CXX11=0
+ ;;
+  default) ENABLE_CXX11=0
+;;
+  *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-cxx11. Use \"yes\" or \"no\"" >&5
+echo "$as_me: error: Invalid setting for --enable-cxx11. Use \"yes\" or \"no\"" >&2;}
+   { (exit 1); exit 1; }; } ;;
+esac
+
 # Check whether --enable-optimized was given.
 if test "${enable_optimized+set}" = set; then
   enableval=$enable_optimized;
@@ -10210,7 +10231,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 10213 "configure"
+#line 10234 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -21937,6 +21958,7 @@ BUILD_EXEEXT!$BUILD_EXEEXT$ac_delim
 BUILD_CXX!$BUILD_CXX$ac_delim
 CVSBUILD!$CVSBUILD$ac_delim
 ENABLE_LIBCPP!$ENABLE_LIBCPP$ac_delim
+ENABLE_CXX11!$ENABLE_CXX11$ac_delim
 ENABLE_OPTIMIZED!$ENABLE_OPTIMIZED$ac_delim
 ENABLE_PROFILING!$ENABLE_PROFILING$ac_delim
 DISABLE_ASSERTIONS!$DISABLE_ASSERTIONS$ac_delim
@@ -21951,7 +21973,6 @@ ENABLE_DOXYGEN!$ENABLE_DOXYGEN$ac_delim
 LLVM_ENABLE_THREADS!$LLVM_ENABLE_THREADS$ac_delim
 ENABLE_PTHREADS!$ENABLE_PTHREADS$ac_delim
 ENABLE_PIC!$ENABLE_PIC$ac_delim
-ENABLE_SHARED!$ENABLE_SHARED$ac_delim
 _ACEOF
 
   if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
@@ -21993,6 +22014,7 @@ _ACEOF
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
   cat >conf$$subs.sed <<_ACEOF
+ENABLE_SHARED!$ENABLE_SHARED$ac_delim
 ENABLE_EMBED_STDCXX!$ENABLE_EMBED_STDCXX$ac_delim
 ENABLE_TIMESTAMPS!$ENABLE_TIMESTAMPS$ac_delim
 TARGETS_TO_BUILD!$TARGETS_TO_BUILD$ac_delim
@@ -22084,7 +22106,7 @@ LIBOBJS!$LIBOBJS$ac_delim
 LTLIBOBJS!$LTLIBOBJS$ac_delim
 _ACEOF
 
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 89; then
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 90; then
     break
   elif $ac_last_try; then
     { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5