}
}
-/// isFrameOperand - Return true and the FrameIndex if the specified
+/// Return true and the FrameIndex if the specified
/// operand and follow operands form a reference to the stack frame.
bool X86InstrInfo::isFrameOperand(const MachineInstr *MI, unsigned int Op,
int &FrameIndex) const {
return 0;
}
-/// regIsPICBase - Return true if register is PIC base (i.e.g defined by
-/// X86::MOVPC32r.
+/// Return true if register is PIC base; i.e.g defined by X86::MOVPC32r.
static bool regIsPICBase(unsigned BaseReg, const MachineRegisterInfo &MRI) {
// Don't waste compile time scanning use-def chains of physregs.
if (!TargetRegisterInfo::isVirtualRegister(BaseReg))
NewMI->substituteRegister(Orig->getOperand(0).getReg(), DestReg, SubIdx, TRI);
}
-/// hasLiveCondCodeDef - True if MI has a condition code def, e.g. EFLAGS, that
-/// is not marked dead.
+/// True if MI has a condition code def, e.g. EFLAGS, that is not marked dead.
static bool hasLiveCondCodeDef(MachineInstr *MI) {
for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
MachineOperand &MO = MI->getOperand(i);
return false;
}
-/// getTruncatedShiftCount - check whether the shift count for a machine operand
-/// is non-zero.
+/// Check whether the shift count for a machine operand is non-zero.
inline static unsigned getTruncatedShiftCount(MachineInstr *MI,
unsigned ShiftAmtOperandIdx) {
// The shift count is six bits with the REX.W prefix and five bits without.
return Imm & ShiftCountMask;
}
-/// isTruncatedShiftCountForLEA - check whether the given shift count is appropriate
+/// Check whether the given shift count is appropriate
/// can be represented by a LEA instruction.
inline static bool isTruncatedShiftCountForLEA(unsigned ShAmt) {
// Left shift instructions can be transformed into load-effective-address
return true;
}
-/// convertToThreeAddressWithLEA - Helper for convertToThreeAddress when
-/// 16-bit LEA is disabled, use 32-bit LEA to form 3-address code by promoting
-/// to a 32-bit superregister and then truncating back down to a 16-bit
-/// subregister.
+/// Helper for convertToThreeAddress when 16-bit LEA is disabled, use 32-bit
+/// LEA to form 3-address code by promoting to a 32-bit superregister and then
+/// truncating back down to a 16-bit subregister.
MachineInstr *
X86InstrInfo::convertToThreeAddressWithLEA(unsigned MIOpc,
MachineFunction::iterator &MFI,
return ExtMI;
}
-/// convertToThreeAddress - This method must be implemented by targets that
+/// This method must be implemented by targets that
/// set the M_CONVERTIBLE_TO_3_ADDR flag. When this flag is set, the target
/// may be able to convert a two-address instruction into a true
/// three-address instruction on demand. This allows the X86 target (for
return NewMI;
}
-/// commuteInstruction - We have a few instructions that must be hacked on to
-/// commute them.
+/// We have a few instructions that must be hacked on to commute them.
///
MachineInstr *
X86InstrInfo::commuteInstruction(MachineInstr *MI, bool NewMI) const {
}
}
-/// getCondFromSETOpc - return condition code of a SET opcode.
+/// Return condition code of a SET opcode.
static X86::CondCode getCondFromSETOpc(unsigned Opc) {
switch (Opc) {
default: return X86::COND_INVALID;
}
}
-/// getCondFromCmovOpc - return condition code of a CMov opcode.
+/// Return condition code of a CMov opcode.
X86::CondCode X86::getCondFromCMovOpc(unsigned Opc) {
switch (Opc) {
default: return X86::COND_INVALID;
}
}
-/// GetOppositeBranchCondition - Return the inverse of the specified condition,
+/// Return the inverse of the specified condition,
/// e.g. turning COND_E to COND_NE.
X86::CondCode X86::GetOppositeBranchCondition(X86::CondCode CC) {
switch (CC) {
}
}
-/// getSwappedCondition - assume the flags are set by MI(a,b), return
-/// the condition code if we modify the instructions such that flags are
-/// set by MI(b,a).
+/// Assuming the flags are set by MI(a,b), return the condition code if we
+/// modify the instructions such that flags are set by MI(b,a).
static X86::CondCode getSwappedCondition(X86::CondCode CC) {
switch (CC) {
default: return X86::COND_INVALID;
}
}
-/// getSETFromCond - Return a set opcode for the given condition and
+/// Return a set opcode for the given condition and
/// whether it has memory operand.
unsigned X86::getSETFromCond(CondCode CC, bool HasMemoryOperand) {
static const uint16_t Opc[16][2] = {
return Opc[CC][HasMemoryOperand ? 1 : 0];
}
-/// getCMovFromCond - Return a cmov opcode for the given condition,
+/// Return a cmov opcode for the given condition,
/// register size in bytes, and operand type.
unsigned X86::getCMovFromCond(CondCode CC, unsigned RegBytes,
bool HasMemoryOperand) {
BuildMI(MBB, I, DL, get(Opc), DstReg).addReg(FalseReg).addReg(TrueReg);
}
-/// isHReg - Test if the given register is a physical h register.
+/// Test if the given register is a physical h register.
static bool isHReg(unsigned Reg) {
return X86::GR8_ABCD_HRegClass.contains(Reg);
}
return false;
}
-/// isRedundantFlagInstr - check whether the first instruction, whose only
+/// Check whether the first instruction, whose only
/// purpose is to update flags, can be made redundant.
/// CMPrr can be made redundant by SUBrr if the operands are the same.
/// This function can be extended later on.
return false;
}
-/// isDefConvertible - check whether the definition can be converted
+/// Check whether the definition can be converted
/// to remove a comparison against zero.
inline static bool isDefConvertible(MachineInstr *MI) {
switch (MI->getOpcode()) {
}
}
-/// isUseDefConvertible - check whether the use can be converted
-/// to remove a comparison against zero.
+/// Check whether the use can be converted to remove a comparison against zero.
static X86::CondCode isUseDefConvertible(MachineInstr *MI) {
switch (MI->getOpcode()) {
default: return X86::COND_INVALID;
}
}
-/// optimizeCompareInstr - Check if there exists an earlier instruction that
+/// Check if there exists an earlier instruction that
/// operates on the same source operands and sets flags in the same way as
/// Compare; remove Compare if possible.
bool X86InstrInfo::
return true;
}
-/// optimizeLoadInstr - Try to remove the load by folding it to a register
+/// Try to remove the load by folding it to a register
/// operand at the use. We fold the load instructions if load defines a virtual
/// register, the virtual register is used once in the same BB, and the
/// instructions in-between do not load or store, and have no side effects.
return nullptr;
}
-/// Expand2AddrUndef - Expand a single-def pseudo instruction to a two-addr
-/// instruction with two undef reads of the register being defined. This is
-/// used for mapping:
+/// Expand a single-def pseudo instruction to a two-addr
+/// instruction with two undef reads of the register being defined.
+/// This is used for mapping:
/// %xmm4 = V_SET0
/// to:
/// %xmm4 = PXORrr %xmm4<undef>, %xmm4<undef>
return nullptr;
}
-/// hasPartialRegUpdate - Return true for all instructions that only update
+/// Return true for all instructions that only update
/// the first 32 or 64-bits of the destination register and leave the rest
/// unmodified. This can be used to avoid folding loads if the instructions
/// only update part of the destination register, and the non-updated part is
return false;
}
-/// getPartialRegUpdateClearance - Inform the ExeDepsFix pass how many idle
+/// Inform the ExeDepsFix pass how many idle
/// instructions we would like before a partial register update.
unsigned X86InstrInfo::
getPartialRegUpdateClearance(const MachineInstr *MI, unsigned OpNum,
RC == &X86::RFP64RegClass || RC == &X86::RFP80RegClass);
}
-/// getGlobalBaseReg - Return a virtual register initialized with the
+/// Return a virtual register initialized with the
/// the global base register value. Output instructions required to
/// initialize the register in the function entry block, if necessary.
///
MI->setDesc(get(table[Domain-1]));
}
-/// getNoopForMachoTarget - Return the noop instruction to use for a noop.
+/// Return the noop instruction to use for a noop.
void X86InstrInfo::getNoopForMachoTarget(MCInst &NopInst) const {
NopInst.setOpcode(X86::NOOP);
}
}
namespace {
- /// CGBR - Create Global Base Reg pass. This initializes the PIC
+ /// Create Global Base Reg pass. This initializes the PIC
/// global base register for x86-32.
struct CGBR : public MachineFunctionPass {
static char ID;
projects / oota-llvm.git / commitdiff