X-Git-Url: http://plrg.eecs.uci.edu/git/?p=oota-llvm.git;a=blobdiff_plain;f=Makefile.config.in;h=f3a9346592890a2029e951823bd869308af5758b;hp=f3197d104c0f0c71b36f069528ef4c3c49515b27;hb=b04776696359e54153e20c426419fe54b6766473;hpb=0fcb9410b9c51a179b3c7a80291f00dac344038c

diff --git a/Makefile.config.in b/Makefile.config.in
index f3197d104c0..f3a93465928 100644
--- a/Makefile.config.in
+++ b/Makefile.config.in
@@ -2,8 +2,8 @@
 #
 #                     The LLVM Compiler Infrastructure
 #
-# This file was developed by the LLVM research group and is distributed under
-# the University of Illinois Open Source License. See LICENSE.TXT for details.
+# This file is distributed under the University of Illinois Open Source
+# License. See LICENSE.TXT for details.
 # 
 #===------------------------------------------------------------------------===#
 #
@@ -12,20 +12,82 @@
 #
 #===------------------------------------------------------------------------===#
 
-# Define LLVM speific info and directories
-PACKAGE_NAME      := @PACKAGE_NAME@
-PACKAGE_VERSION   := @PACKAGE_VERSION@
-LLVM_PREFIX       := @LLVM_PREFIX@
-LLVM_BINDIR       := @LLVM_BINDIR@
-LLVM_LIBDIR       := @LLVM_LIBDIR@
-LLVM_DATADIR      := @LLVM_DATADIR@
-LLVM_DOCSDIR      := @LLVM_DOCSDIR@
-LLVM_ETCDIR       := @LLVM_ETCDIR@
-LLVM_INCLUDEDIR   := @LLVM_INCLUDEDIR@
-LLVM_INFODIR      := @LLVM_INFODIR@
-LLVM_MANDIR       := @LLVM_MANDIR@
+# Define LLVM specific info and directories based on the autoconf variables
+LLVMPackageName   := @PACKAGE_NAME@
+LLVMVersion       := @PACKAGE_VERSION@
 LLVM_CONFIGTIME   := @LLVM_CONFIGTIME@
-LLVM_TARBALL_NAME := @PACKAGE_NAME@-@PACKAGE_VERSION@
+
+###########################################################################
+# Directory Configuration
+#	This section of the Makefile determines what is where.  To be
+#	specific, there are several locations that need to be defined:
+#
+#	o LLVM_SRC_ROOT  : The root directory of the LLVM source code.
+#	o LLVM_OBJ_ROOT  : The root directory containing the built LLVM code.
+#
+#	o PROJ_SRC_DIR  : The directory containing the code to build.
+#	o PROJ_SRC_ROOT : The root directory of the code to build.
+#
+#	o PROJ_OBJ_DIR  : The directory in which compiled code will be placed.
+#	o PROJ_OBJ_ROOT : The root directory in which compiled code is placed.
+#
+###########################################################################
+
+PWD := @BINPWD@
+# Set the project name to LLVM if its not defined
+ifndef PROJECT_NAME
+PROJECT_NAME := $(LLVMPackageName)
+endif
+
+PROJ_OBJ_DIR  := $(shell $(PWD))
+PROJ_OBJ_ROOT := $(shell cd $(PROJ_OBJ_DIR)/$(LEVEL); $(PWD))
+
+ifeq ($(PROJECT_NAME),llvm)
+LLVM_SRC_ROOT   := $(shell cd @abs_top_srcdir@; $(PWD))
+LLVM_OBJ_ROOT   := $(shell cd @abs_top_builddir@; $(PWD))
+PROJ_SRC_ROOT   := $(shell cd $(LLVM_SRC_ROOT); $(PWD))
+PROJ_SRC_DIR    := $(shell cd $(LLVM_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD))
+prefix          := @prefix@
+PROJ_prefix     := $(prefix)
+PROJ_VERSION    := $(LLVMVersion)
+else
+ifndef PROJ_SRC_ROOT
+$(error Projects must define PROJ_SRC_ROOT)
+endif
+ifndef PROJ_OBJ_ROOT
+$(error Projects must define PROJ_OBJ_ROOT)
+endif
+ifndef PROJ_INSTALL_ROOT
+$(error Projects must define PROJ_INSTALL_ROOT)
+endif
+ifndef LLVM_SRC_ROOT
+$(error Projects must define LLVM_SRC_ROOT)
+endif
+ifndef LLVM_OBJ_ROOT
+$(error Projects must define LLVM_OBJ_ROOT)
+endif
+PROJ_SRC_DIR := $(shell cd $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD))
+prefix          := $(PROJ_INSTALL_ROOT)
+PROJ_prefix     := $(prefix)
+ifndef PROJ_VERSION
+PROJ_VERSION := 1.0
+endif
+endif
+
+LLVMMAKE := $(LLVM_SRC_ROOT)/make
+
+PROJ_bindir     := $(DESTDIR)$(PROJ_prefix)/bin
+PROJ_libdir     := $(DESTDIR)$(PROJ_prefix)/lib
+PROJ_datadir    := $(DESTDIR)$(PROJ_prefix)/share
+PROJ_docsdir    := $(DESTDIR)$(PROJ_prefix)/docs/llvm
+PROJ_etcdir     := $(DESTDIR)$(PROJ_prefix)/etc/llvm
+PROJ_includedir := $(DESTDIR)$(PROJ_prefix)/include
+PROJ_infodir    := $(DESTDIR)$(PROJ_prefix)/info
+PROJ_mandir     := $(DESTDIR)$(PROJ_prefix)/share/man
+
+# Determine if we're on a unix type operating system
+LLVM_ON_UNIX:=@LLVM_ON_UNIX@
+LLVM_ON_WIN32:=@LLVM_ON_WIN32@
 
 # Target operating system for which LLVM will be compiled.
 OS=@OS@
@@ -33,9 +95,19 @@ OS=@OS@
 # Target hardware architecture
 ARCH=@ARCH@
 
+# Indicates, whether we're cross-compiling LLVM or not
+LLVM_CROSS_COMPILING=@LLVM_CROSS_COMPILING@
+
+# Executable file extension for build platform (mainly for
+# tablegen call if we're cross-compiling).
+BUILD_EXEEXT=@BUILD_EXEEXT@
+
 # Target triple (cpu-vendor-os) for which we should generate code
 TARGET_TRIPLE=@target@
 
+# Extra options to compile LLVM with
+EXTRA_OPTIONS=@EXTRA_OPTIONS@
+
 # Endian-ness of the target
 ENDIAN=@ENDIAN@
 
@@ -49,26 +121,23 @@ CC := @CC@
 # Linker flags.
 LDFLAGS+=@LDFLAGS@
 
-# Libraries needed by tools
-TOOLLINKOPTS=@LIBS@
-
 # Path to the library archiver program.
 AR_PATH = @AR@
 
+# Path to the nm program
+NM_PATH = @NM@
+
 # The pathnames of the programs we require to build
 BISON      := @BISON@
+CMP        := @CMP@
+CP         := @CP@
 DATE       := @DATE@
 FIND       := @FIND@
 FLEX       := @LEX@
 GREP       := @GREP@
 INSTALL    := @INSTALL@
-INSTALL_SH := $(BUILD_SRC_ROOT)/autoconf/install-sh
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_DATA = @INSTALL_DATA@
-MKDIR      := @abs_top_srcdir@/autoconf/mkinstalldirs
+MKDIR      := $(LLVM_SRC_ROOT)/autoconf/mkinstalldirs
 MV         := @MV@
-PAX        := @PAX@
 RANLIB     := @RANLIB@
 RM         := @RM@
 SED        := @SED@
@@ -76,47 +145,82 @@ TAR        := @TAR@
 YACC       := @YACC@
 
 # Paths to miscellaneous programs we hope are present but might not be
+PERL       := @PERL@ 
 BZIP2      := @BZIP2@
 DOT        := @DOT@
 DOXYGEN    := @DOXYGEN@
-ETAGS      := @ETAGS@
-ETAGSFLAGS := @ETAGSFLAGS@
 GROFF      := @GROFF@
 GZIP       := @GZIP@
+OCAMLC     := @OCAMLC@
+OCAMLOPT   := @OCAMLOPT@
+OCAMLDEP   := @OCAMLDEP@
+OCAMLDOC   := @OCAMLDOC@
 POD2HTML   := @POD2HTML@
 POD2MAN    := @POD2MAN@
-PYTHON     := @PYTHON@
 RUNTEST    := @RUNTEST@
 TCLSH      := @TCLSH@
 ZIP        := @ZIP@
 
-# Paths to miscellaneous programs we assume are present
-RPWD       := pwd
-ECHO       := echo
+HAVE_PERL    := @HAVE_PERL@
+HAVE_PTHREAD := @HAVE_PTHREAD@
+
+LIBS       := @LIBS@
+
+# Targets that we should build
+TARGETS_TO_BUILD=@TARGETS_TO_BUILD@
+
+# Path to location for LLVM C/C++ front-end. You can modify this if you
+# want to override the value set by configure.
+LLVMGCCDIR := @LLVMGCCDIR@
+
 # Determine the target for which LLVM should generate code.
+ifeq (@LLVMGCC_MAJVERS@,3)
 LLVMGCCARCH := @target@/3.4-llvm
+else
+LLVMGCCARCH := @target@/@LLVMGCC_VERSION@
+endif
+
+# Determine the path where the library executables are
+LLVMGCCLIBEXEC := @LLVMGCCLIBEXEC@
 
 # Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries:
-LCC1 = @LLVMCC1@
-LCC1XX = @LLVMCC1PLUS@
+LLVMGCC  := @LLVMGCC@
+LLVMGXX  := @LLVMGXX@
+LLVMCC1  := @LLVMCC1@
+LLVMCC1PLUS := @LLVMCC1PLUS@
+LLVMGCC_VERSION := @LLVMGCC_VERSION@
+LLVMGCC_MAJVERS := @LLVMGCC_MAJVERS@
+LLVMGCC_LANGS := @LLVMGCC_LANGS@
 
 # Path to directory where object files should be stored during a build.
 # Set OBJ_ROOT to "." if you do not want to use a separate place for
 # object files.
 OBJ_ROOT := .
 
-# Path to location for LLVM C/C++ front-end. You can modify this if you
-# want to override the value set by configure.
-LLVMGCCDIR := @LLVMGCCDIR@
-
 # These are options that can either be enabled here, or can be enabled on the
 # make command line (ie, make ENABLE_PROFILING=1):
 
-# When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are
-# turned on, and Debug builds are turned off.
+# When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put
+# into the "Release" directories. Otherwise, LLVM code is not optimized and 
+# output is put in the "Debug" directories.
 #ENABLE_OPTIMIZED = 1
 @ENABLE_OPTIMIZED@
 
+# When DISABLE_ASSERTIONS is enabled, builds of all of the LLVM code will 
+# exclude assertion checks, otherwise they are included.
+#DISABLE_ASSERTIONS = 1
+@DISABLE_ASSERTIONS@
+
+# When ENABLE_EXPENSIVE_CHECKS is enabled, builds of all of the LLVM
+# code will include expensive checks, otherwise they are excluded.
+#ENABLE_EXPENSIVE_CHECKS = 0
+@ENABLE_EXPENSIVE_CHECKS@
+
+# When DEBUG_RUNTIME is enabled, the runtime libraries will retain debug
+# symbols.
+#DEBUG_RUNTIME = 1
+@DEBUG_RUNTIME@
+
 # When ENABLE_PROFILING is enabled, the llvm source base is built with profile
 # information to allow gprof to be used to get execution frequencies.
 #ENABLE_PROFILING = 1
@@ -124,85 +228,49 @@ LLVMGCCDIR := @LLVMGCCDIR@
 # When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built
 ENABLE_DOXYGEN = @ENABLE_DOXYGEN@
 
+# Do we want to enable threads?
+ENABLE_THREADS := @ENABLE_THREADS@
+
+# Do we want to build with position independent code?
+ENABLE_PIC := @ENABLE_PIC@
+
 # This option tells the Makefiles to produce verbose output.
 # It essentially prints the commands that make is executing
 #VERBOSE = 1
 
 # Enable JIT for this platform
-@JIT@
+TARGET_HAS_JIT = @TARGET_HAS_JIT@
 
-# Shared library extension for this platform.
+# Shared library extension for host platform.
 SHLIBEXT = @SHLIBEXT@
 
-# Executable file extension for this platform.
+# Executable file extension for host platform.
 EXEEXT = @EXEEXT@
 
-###########################################################################
-# Directory Configuration
-#	This section of the Makefile determines what is where.  To be
-#	specific, there are several locations that need to be defined:
-#
-#	o LLVM_SRC_ROOT  : The root directory of the LLVM source code.
-#	o LLVM_OBJ_ROOT  : The root directory containing the built LLVM code.
-#
-#	o BUILD_SRC_DIR  : The directory containing the code to build.
-#	o BUILD_SRC_ROOT : The root directory of the code to build.
-#
-#	o BUILD_OBJ_DIR  : The directory in which compiled code will be placed.
-#	o BUILD_OBJ_ROOT : The root directory in which compiled code is placed.
-#
-###########################################################################
-
-# Set the object build directory.  By default, it is the current directory.
-ifndef BUILD_OBJ_DIR
-BUILD_OBJ_DIR := $(subst //,/,$(shell $(RPWD)))
-endif
-
-# Set the root of the object directory.
-ifndef BUILD_OBJ_ROOT
-BUILD_OBJ_ROOT := $(subst //,/,$(shell cd $(BUILD_OBJ_DIR)/$(LEVEL); $(RPWD)))
-endif
-
-# Set the source build directory.  That is almost always the current directory.
-ifndef BUILD_SRC_DIR
-BUILD_SRC_DIR := $(subst //,/,@abs_top_srcdir@/$(patsubst $(BUILD_OBJ_ROOT)%,%,$(BUILD_OBJ_DIR)))
-endif
-
-# Set the source root directory.
-ifndef BUILD_SRC_ROOT
-BUILD_SRC_ROOT := $(subst //,/,@abs_top_srcdir@)
-endif
-
-# Set the LLVM object directory.
-ifndef LLVM_OBJ_ROOT
-ifdef LLVM_SRC_ROOT
-LLVM_OBJ_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(RPWD))
+# Things we just assume are "there"
+ECHO := echo
+
+# Get the options for causing archives to link all their content instead of
+# just missing symbols, and the inverse of that. This is used for certain LLVM
+# tools that permit loadable modules. It ensures that the LLVM symbols will be
+# available to those loadable modules.
+LINKALL := @LINKALL@
+NOLINKALL := @NOLINKALL@
+
+# Get the value of HUGE_VAL_SANITY which will be either "yes" or "no" depending
+# on the check.
+HUGE_VAL_SANITY = @HUGE_VAL_SANITY@
+
+# Bindings that we should build
+BINDINGS_TO_BUILD := @BINDINGS_TO_BUILD@
+ALL_BINDINGS      := @ALL_BINDINGS@
+OCAML_LIBDIR      := @OCAML_LIBDIR@
+
+# When compiling under Mingw/Cygwin, executables such as tblgen
+# expect Windows paths, whereas the build system uses Unix paths.
+# The function SYSPATH transforms Unix paths into Windows paths.
+ifneq (,$(findstring -mno-cygwin, $(CXX)))
+  SYSPATH = $(shell echo $(1) | cygpath -m -f -)
 else
-LLVM_OBJ_ROOT := $(BUILD_OBJ_ROOT)
-endif
+  SYSPATH = $(1)
 endif
-
-# Set the LLVM source directory.
-# It is typically the root directory of what we're compiling now.
-ifndef LLVM_SRC_ROOT
-LLVM_SRC_ROOT := $(BUILD_SRC_ROOT)
-endif
-
-# Installation directories, as provided by the configure script.
-abs_top_srcdir = @abs_top_srcdir@
-abs_top_builddir = @abs_top_builddir@
-exec_prefix = @exec_prefix@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@ 
-localstatedir = @localstatedir@
-libdir = @libdir@
-bytecode_libdir = $(LLVMGCCDIR)/bytecode-libs
-includedir = @includedir@
-infodir = @infodir@
-mandir = @mandir@