X-Git-Url: http://plrg.eecs.uci.edu/git/?p=oota-llvm.git;a=blobdiff_plain;f=Makefile.config.in;h=5522232706fb1e9e96dc692a3680bcb4101416d4;hp=d83e93e72a9664c67fdcfc720b1b91f9994fba64;hb=e86ce7d94abaf7883a5d84dcb9a79c118b63672b;hpb=5339ada5ab06da024b19d6497aa8f1d74233d4a0 diff --git a/Makefile.config.in b/Makefile.config.in index d83e93e72a9..5522232706f 100644 --- a/Makefile.config.in +++ b/Makefile.config.in @@ -1,262 +1,267 @@ -#===-- Makefile.config - Local configuration for LLVM ------*- makefile -*--==== +#===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===# +# +# The LLVM Compiler Infrastructure +# +# This file was developed by the LLVM research group and is distributed under +# the University of Illinois Open Source License. See LICENSE.TXT for details. +# +#===------------------------------------------------------------------------===# # # This file is included by Makefile.common. It defines paths and other # values specific to a particular installation of LLVM. -#===-----------------------------------------------------------------------==== +# +#===------------------------------------------------------------------------===# + +# Define LLVM specific info and directories based on the autoconf variables +LLVMPackageName := @PACKAGE_NAME@ +LLVMVersion := @PACKAGE_VERSION@ +LLVM_CONFIGTIME := @LLVM_CONFIGTIME@ +########################################################################### +# Directory Configuration +# This section of the Makefile determines what is where. To be +# specific, there are several locations that need to be defined: # -# Target operating system for which LLVM will be compiled. +# o LLVM_SRC_ROOT : The root directory of the LLVM source code. +# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code. +# +# o PROJ_SRC_DIR : The directory containing the code to build. +# o PROJ_SRC_ROOT : The root directory of the code to build. +# +# o PROJ_OBJ_DIR : The directory in which compiled code will be placed. +# o PROJ_OBJ_ROOT : The root directory in which compiled code is placed. # +########################################################################### + +PWD := @BINPWD@ +# Set the project name to LLVM if its not defined +ifndef PROJECT_NAME +PROJECT_NAME := $(LLVMPackageName) +endif + +PROJ_OBJ_DIR := $(shell $(PWD)) +PROJ_OBJ_ROOT := $(shell cd $(PROJ_OBJ_DIR)/$(LEVEL); $(PWD)) + +ifeq ($(PROJECT_NAME),llvm) +LLVM_SRC_ROOT := $(shell cd @abs_top_srcdir@; $(PWD)) +LLVM_OBJ_ROOT := $(shell cd @abs_top_builddir@; $(PWD)) +PROJ_SRC_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(PWD)) +PROJ_SRC_DIR := $(shell cd $(LLVM_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD)) +prefix := @prefix@ +PROJ_prefix := $(prefix) +PROJ_VERSION := $(LLVMVersion) +else +ifndef PROJ_SRC_ROOT +$(error Projects must define PROJ_SRC_ROOT) +endif +ifndef PROJ_OBJ_ROOT +$(error Projects must define PROJ_OBJ_ROOT) +endif +ifndef PROJ_INSTALL_ROOT +$(error Projects must define PROJ_INSTALL_ROOT) +endif +ifndef LLVM_SRC_ROOT +$(error Projects must define LLVM_SRC_ROOT) +endif +ifndef LLVM_OBJ_ROOT +$(error Projects must define LLVM_OBJ_ROOT) +endif +PROJ_SRC_DIR := $(shell cd $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD)) +prefix := $(PROJ_INSTALL_ROOT) +PROJ_prefix := $(prefix) +ifndef PROJ_VERSION +PROJ_VERSION := 1.0 +endif +endif + +LLVMMAKE := $(LLVM_SRC_ROOT)/make + +PROJ_bindir := $(DESTDIR)$(PROJ_prefix)/bin +PROJ_libdir := $(DESTDIR)$(PROJ_prefix)/lib +PROJ_datadir := $(DESTDIR)$(PROJ_prefix)/share +PROJ_docsdir := $(DESTDIR)$(PROJ_prefix)/docs/llvm +PROJ_etcdir := $(DESTDIR)$(PROJ_prefix)/etc/llvm +PROJ_includedir := $(DESTDIR)$(PROJ_prefix)/include +PROJ_infodir := $(DESTDIR)$(PROJ_prefix)/info +PROJ_mandir := $(DESTDIR)$(PROJ_prefix)/share/man + +# Determine if we're on a unix type operating system +LLVM_ON_UNIX:=@LLVM_ON_UNIX@ +LLVM_ON_WIN32:=@LLVM_ON_WIN32@ + +# Target operating system for which LLVM will be compiled. OS=@OS@ -# # Target hardware architecture -# ARCH=@ARCH@ +# Indicates, whether we're cross-compiling LLVM or not +LLVM_CROSS_COMPILING=@LLVM_CROSS_COMPILING@ + +# Executable file extension for build platform (mainly for +# tablegen call if we're cross-compiling). +BUILD_EXEEXT=@BUILD_EXEEXT@ + +# Target triple (cpu-vendor-os) for which we should generate code +TARGET_TRIPLE=@target@ + +# Extra options to compile LLVM with +EXTRA_OPTIONS=@EXTRA_OPTIONS@ + +# Endian-ness of the target +ENDIAN=@ENDIAN@ + # Path to the C++ compiler to use. This is an optional setting, which defaults # to whatever your gmake defaults to. -# -# Under Linux, for some reason the compiler driver wants to search the PATH to -# find the system assembler, which breaks if the LLVM assembler is in our path. -# Hack it to use the assembler in /usr/bin directly. -# CXX = @CXX@ -# We have the same problem with the CC binary, which use used by testcases for -# native builds. -# +# Path to the CC binary, which use used by testcases for native builds. CC := @CC@ -# -# Compilation flags for the C and C++ compilers. -# - -# -# Removing the compiler flags for now. They interfere with the test suite -# (which has its own autoconf stuff), and we don't use -DHAVE_CONFIG_H anyway. -# -#CPPFLAGS+=@DEFS@ -#CCFLAGS+=@DEFS@ +# Linker flags. LDFLAGS+=@LDFLAGS@ -# -# Removed since it prevents the tests from working properly. -# -#LIBS+=@LIBS@ - -# -# Libraries needed by tools -# -TOOLLINKOPTS=@LIBS@ - -# -# Path to the archiver program. -# +# Path to the library archiver program. AR_PATH = @AR@ -# -# The pathnames of the Flex and Bison programs, respectively. -# -BISON = @YACC@ -FLEX = @LEX@ - -# -# Paths to miscellaneous programs. -# -RPWD = @RPWD@ -SED = @SED@ -RM = @RM@ -ECHO = @ECHO@ -MKDIR = @abs_top_srcdir@/autoconf/mkinstalldirs -DATE = @DATE@ -MV = @MV@ -INSTALL = @INSTALL@ -DOT = @DOT@ -ETAGS = @ETAGS@ +# Path to the nm program +NM_PATH = @NM@ + +# The pathnames of the programs we require to build +BISON := @BISON@ +CMP := @CMP@ +CP := @CP@ +DATE := @DATE@ +FIND := @FIND@ +FLEX := @LEX@ +GREP := @GREP@ +INSTALL := @INSTALL@ +MKDIR := $(LLVM_SRC_ROOT)/autoconf/mkinstalldirs +MV := @MV@ +RANLIB := @RANLIB@ +RM := @RM@ +SED := @SED@ +TAR := @TAR@ +YACC := @YACC@ + +# Paths to miscellaneous programs we hope are present but might not be +PERL := @PERL@ +BZIP2 := @BZIP2@ +DOT := @DOT@ +DOXYGEN := @DOXYGEN@ +GROFF := @GROFF@ +GZIP := @GZIP@ +OCAMLC := @OCAMLC@ +OCAMLOPT := @OCAMLOPT@ +OCAMLDEP := @OCAMLDEP@ +POD2HTML := @POD2HTML@ +POD2MAN := @POD2MAN@ +RUNTEST := @RUNTEST@ +TCLSH := @TCLSH@ +ZIP := @ZIP@ + +HAVE_PERL := @HAVE_PERL@ +HAVE_PTHREAD := @HAVE_PTHREAD@ + +LIBS := @LIBS@ + +# Targets that we should build +TARGETS_TO_BUILD=@TARGETS_TO_BUILD@ + +# Path to location for LLVM C/C++ front-end. You can modify this if you +# want to override the value set by configure. +LLVMGCCDIR := @LLVMGCCDIR@ -# # Determine the target for which LLVM should generate code. -# +ifeq (@LLVMGCC_MAJVERS@,3) LLVMGCCARCH := @target@/3.4-llvm +else +LLVMGCCARCH := @target@/@LLVMGCC_VERSION@ +endif + +# Determine the path where the library executables are +LLVMGCCLIBEXEC := @LLVMGCCLIBEXEC@ + +# Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries: +LLVMGCC := @LLVMGCC@ +LLVMGXX := @LLVMGXX@ +LLVMCC1 := @LLVMCC1@ +LLVMCC1PLUS := @LLVMCC1PLUS@ +LLVMGCC_VERSION := @LLVMGCC_VERSION@ +LLVMGCC_MAJVERS := @LLVMGCC_MAJVERS@ +LLVMGCC_LANGS := @LLVMGCC_LANGS@ # Path to directory where object files should be stored during a build. # Set OBJ_ROOT to "." if you do not want to use a separate place for # object files. -# -#OBJ_ROOT = . OBJ_ROOT := . -# Path to location for LLVM front-end this should only be specified here if you -# want to override the value set in Makefile.$(uname) -# -LLVMGCCDIR := @LLVMGCCDIR@ - -# When this setting is set to true, programs in the llvm/test/Programs hierarchy -# are not recompiled from source code. Instead, the bytecode for the file is -# pulled from the BYTECODE_REPOSITORY directory. This can be useful when disk -# space is limited or when you just don't want to spend time running the C -# frontend. -# -#USE_PRECOMPILED_BYTECODE := 1 -@UPB@ - -# This path specifies the cannonical location of bytecode files for compiled -# versions of the test/Programs/* programs. This is used as the bytecode source -# when USE_PRECOMPILED_BYTECODE is specified or when source code is not -# available for the program (such as SPEC). -# -BYTECODE_REPOSITORY := @BCR@ - -# Path to location for purify, this is only needed if you build with -# ENABLE_PURIFY=1 -# -PURIFY = @PURIFY@ - -# -# SPEC benchmarks: -# Set the USE_SPEC variable to enable the use of the SPEC benchmarks. -# You must provide the SPEC benchmarks on your own. -# -@USE_SPEC@ - -# -# Path to the SPEC benchmarks. If you have the SPEC benchmarks, place the -# path here. -# -#SPEC_ROOT := /home/vadve/shared/benchmarks/speccpu2000/benchspec -SPEC_ROOT := @SPEC_ROOT@ - -# -# Path to the PAPI code. This is used by the reoptimizer only. -# -#PAPIDIR := /home/vadve/shared/papi-2.3.4.1 -PAPIDIR := @PAPIDIR@ - # These are options that can either be enabled here, or can be enabled on the -# make command line (ie, make ENABLE_PROFILING=1) -# +# make command line (ie, make ENABLE_PROFILING=1): -# When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are -# turned on, and Debug builds are turned off. -# +# When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put +# into the "Release" directories. Otherwise, LLVM code is not optimized and +# output is put in the "Debug" directories. #ENABLE_OPTIMIZED = 1 @ENABLE_OPTIMIZED@ +# When DISABLE_ASSERTIONS is enabled, builds of all of the LLVM code will +# exclude assertion checks, otherwise they are included. +#DISABLE_ASSERTIONS = 1 +@DISABLE_ASSERTIONS@ + +# When ENABLE_EXPENSIVE_CHECKS is enabled, builds of all of the LLVM +# code will include expensive checks, otherwise they are excluded. +#ENABLE_EXPENSIVE_CHECKS = 0 +@ENABLE_EXPENSIVE_CHECKS@ + +# When DEBUG_RUNTIME is enabled, the runtime libraries will retain debug +# symbols. +#DEBUG_RUNTIME = 1 +@DEBUG_RUNTIME@ + # When ENABLE_PROFILING is enabled, the llvm source base is built with profile # information to allow gprof to be used to get execution frequencies. -# #ENABLE_PROFILING = 1 -# +# When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built +ENABLE_DOXYGEN = @ENABLE_DOXYGEN@ + +# Do we want to enable threads? +ENABLE_THREADS := @ENABLE_THREADS@ + +# Do we want to build with position independent code? +ENABLE_PIC := @ENABLE_PIC@ + # This option tells the Makefiles to produce verbose output. # It essentially prints the commands that make is executing -# #VERBOSE = 1 -# When ENABLE_PURIFY is set to 1, the LLVM tools are linked with purify (which -# must be locally installed) to allow for some automated memory error debugging. -# -#ENABLE_PURIFY = 1 -@ENABLE_PURIFY@ - -# # Enable JIT for this platform -# -@JIT@ - -# -# Disable LLC diffs for testing. -# -@DISABLE_LLC_DIFFS@ - -########################################################################### -# Directory Configuration -# This section of the Makefile determines what is where. To be -# specific, there are several locations that need to be defined: -# -# o LLVM_SRC_ROOT : The root directory of the LLVM source code. -# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code. -# -# o BUILD_SRC_DIR : The directory containing the code to build. -# o BUILD_SRC_ROOT : The root directory of the code to build. -# -# o BUILD_OBJ_DIR : The directory in which compiled code will be placed. -# o BUILD_OBJ_ROOT : The root directory in which compiled code is placed. -# -########################################################################### +TARGET_HAS_JIT = @TARGET_HAS_JIT@ -# -# Set the object build directory. By default, it is the current directory. -# -ifndef BUILD_OBJ_DIR -BUILD_OBJ_DIR := $(subst //,/,$(shell $(RPWD))) -endif - -# -# Set the root of the object directory. -# -ifndef BUILD_OBJ_ROOT -BUILD_OBJ_ROOT := $(subst //,/,$(shell cd $(BUILD_OBJ_DIR)/$(LEVEL); $(RPWD))) -endif - -# -# Set the source build directory. That is almost always the current directory. -# -ifndef BUILD_SRC_DIR -BUILD_SRC_DIR := $(subst //,/,@abs_top_srcdir@/$(patsubst $(BUILD_OBJ_ROOT)%,%,$(BUILD_OBJ_DIR))) -endif +# Shared library extension for host platform. +SHLIBEXT = @SHLIBEXT@ -# -# Set the source root directory. -# -ifndef BUILD_SRC_ROOT -BUILD_SRC_ROOT := $(subst //,/,@abs_top_srcdir@) -endif +# Executable file extension for host platform. +EXEEXT = @EXEEXT@ -# -# Set the LLVM object directory. -# -ifndef LLVM_OBJ_ROOT -ifdef LLVM_SRC_ROOT -LLVM_OBJ_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(RPWD)) -else -LLVM_OBJ_ROOT := $(BUILD_OBJ_ROOT) -endif -endif +# Things we just assume are "there" +ECHO := echo -# -# Set the LLVM source directory. -# It is typically the root directory of what we're compiling now. -# -ifndef LLVM_SRC_ROOT -LLVM_SRC_ROOT := $(BUILD_SRC_ROOT) -endif +# Get the options for causing archives to link all their content instead of +# just missing symbols, and the inverse of that. This is used for certain LLVM +# tools that permit loadable modules. It ensures that the LLVM symbols will be +# available to those loadable modules. +LINKALL := @LINKALL@ +NOLINKALL := @NOLINKALL@ -# -# Set SourceDir for backwards compatbility. -# -ifndef SourceDir -SourceDir=$(BUILD_SRC_DIR) -endif +# Get the value of HUGE_VAL_SANITY which will be either "yes" or "no" depending +# on the check. +HUGE_VAL_SANITY = @HUGE_VAL_SANITY@ -# Installation directories, as provided by the configure script. - -exec_prefix = @exec_prefix@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -includedir = @includedir@ -infodir = @infodir@ -mandir = @mandir@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_DATA = @INSTALL_DATA@ +# Bindings that we should build +BINDINGS_TO_BUILD := @BINDINGS_TO_BUILD@ +ALL_BINDINGS := @ALL_BINDINGS@ +OCAML_LIBDIR := @OCAML_LIBDIR@