X-Git-Url: http://plrg.eecs.uci.edu/git/?p=oota-llvm.git;a=blobdiff_plain;f=Makefile.config.in;h=5522232706fb1e9e96dc692a3680bcb4101416d4;hp=bf12c05825a09ea8001fd9bc943f6c712b3ae660;hb=1d4e0782ba9761e3c664de53b837b74c0c818ff1;hpb=f3dd0dbc584d66a25e11bca66c6d2e93ac247e27 diff --git a/Makefile.config.in b/Makefile.config.in index bf12c05825a..5522232706f 100644 --- a/Makefile.config.in +++ b/Makefile.config.in @@ -1,9 +1,93 @@ -#===-- Makefile.config - Local configuration for LLVM ------*- makefile -*--==== +#===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===# +# +# The LLVM Compiler Infrastructure +# +# This file was developed by the LLVM research group and is distributed under +# the University of Illinois Open Source License. See LICENSE.TXT for details. +# +#===------------------------------------------------------------------------===# # # This file is included by Makefile.common. It defines paths and other # values specific to a particular installation of LLVM. # -#===-----------------------------------------------------------------------==== +#===------------------------------------------------------------------------===# + +# Define LLVM specific info and directories based on the autoconf variables +LLVMPackageName := @PACKAGE_NAME@ +LLVMVersion := @PACKAGE_VERSION@ +LLVM_CONFIGTIME := @LLVM_CONFIGTIME@ + +########################################################################### +# Directory Configuration +# This section of the Makefile determines what is where. To be +# specific, there are several locations that need to be defined: +# +# o LLVM_SRC_ROOT : The root directory of the LLVM source code. +# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code. +# +# o PROJ_SRC_DIR : The directory containing the code to build. +# o PROJ_SRC_ROOT : The root directory of the code to build. +# +# o PROJ_OBJ_DIR : The directory in which compiled code will be placed. +# o PROJ_OBJ_ROOT : The root directory in which compiled code is placed. +# +########################################################################### + +PWD := @BINPWD@ +# Set the project name to LLVM if its not defined +ifndef PROJECT_NAME +PROJECT_NAME := $(LLVMPackageName) +endif + +PROJ_OBJ_DIR := $(shell $(PWD)) +PROJ_OBJ_ROOT := $(shell cd $(PROJ_OBJ_DIR)/$(LEVEL); $(PWD)) + +ifeq ($(PROJECT_NAME),llvm) +LLVM_SRC_ROOT := $(shell cd @abs_top_srcdir@; $(PWD)) +LLVM_OBJ_ROOT := $(shell cd @abs_top_builddir@; $(PWD)) +PROJ_SRC_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(PWD)) +PROJ_SRC_DIR := $(shell cd $(LLVM_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD)) +prefix := @prefix@ +PROJ_prefix := $(prefix) +PROJ_VERSION := $(LLVMVersion) +else +ifndef PROJ_SRC_ROOT +$(error Projects must define PROJ_SRC_ROOT) +endif +ifndef PROJ_OBJ_ROOT +$(error Projects must define PROJ_OBJ_ROOT) +endif +ifndef PROJ_INSTALL_ROOT +$(error Projects must define PROJ_INSTALL_ROOT) +endif +ifndef LLVM_SRC_ROOT +$(error Projects must define LLVM_SRC_ROOT) +endif +ifndef LLVM_OBJ_ROOT +$(error Projects must define LLVM_OBJ_ROOT) +endif +PROJ_SRC_DIR := $(shell cd $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)); $(PWD)) +prefix := $(PROJ_INSTALL_ROOT) +PROJ_prefix := $(prefix) +ifndef PROJ_VERSION +PROJ_VERSION := 1.0 +endif +endif + +LLVMMAKE := $(LLVM_SRC_ROOT)/make + +PROJ_bindir := $(DESTDIR)$(PROJ_prefix)/bin +PROJ_libdir := $(DESTDIR)$(PROJ_prefix)/lib +PROJ_datadir := $(DESTDIR)$(PROJ_prefix)/share +PROJ_docsdir := $(DESTDIR)$(PROJ_prefix)/docs/llvm +PROJ_etcdir := $(DESTDIR)$(PROJ_prefix)/etc/llvm +PROJ_includedir := $(DESTDIR)$(PROJ_prefix)/include +PROJ_infodir := $(DESTDIR)$(PROJ_prefix)/info +PROJ_mandir := $(DESTDIR)$(PROJ_prefix)/share/man + +# Determine if we're on a unix type operating system +LLVM_ON_UNIX:=@LLVM_ON_UNIX@ +LLVM_ON_WIN32:=@LLVM_ON_WIN32@ # Target operating system for which LLVM will be compiled. OS=@OS@ @@ -11,194 +95,173 @@ OS=@OS@ # Target hardware architecture ARCH=@ARCH@ +# Indicates, whether we're cross-compiling LLVM or not +LLVM_CROSS_COMPILING=@LLVM_CROSS_COMPILING@ + +# Executable file extension for build platform (mainly for +# tablegen call if we're cross-compiling). +BUILD_EXEEXT=@BUILD_EXEEXT@ + +# Target triple (cpu-vendor-os) for which we should generate code +TARGET_TRIPLE=@target@ + +# Extra options to compile LLVM with +EXTRA_OPTIONS=@EXTRA_OPTIONS@ + # Endian-ness of the target ENDIAN=@ENDIAN@ # Path to the C++ compiler to use. This is an optional setting, which defaults # to whatever your gmake defaults to. -# -# Under Linux, for some reason the compiler driver wants to search the PATH to -# find the system assembler, which breaks if the LLVM assembler is in our path. -# Hack it to use the assembler in /usr/bin directly. CXX = @CXX@ -# We have the same problem with the CC binary, which use used by testcases for -# native builds. +# Path to the CC binary, which use used by testcases for native builds. CC := @CC@ # Linker flags. LDFLAGS+=@LDFLAGS@ -# Libraries needed by tools -TOOLLINKOPTS=@LIBS@ - # Path to the library archiver program. AR_PATH = @AR@ -# The pathnames of the Flex and Bison programs, respectively. -YACC = @YACC@ -BISON = @BISON@ -FLEX = @LEX@ - -# Paths to miscellaneous programs. -RPWD = pwd -SED = sed -RM = rm -ECHO = echo -MKDIR = @abs_top_srcdir@/autoconf/mkinstalldirs -DATE = date -MV = mv -INSTALL = @INSTALL@ -DOT = @DOT@ -ETAGS = @ETAGS@ -ETAGSFLAGS = @ETAGSFLAGS@ +# Path to the nm program +NM_PATH = @NM@ + +# The pathnames of the programs we require to build +BISON := @BISON@ +CMP := @CMP@ +CP := @CP@ +DATE := @DATE@ +FIND := @FIND@ +FLEX := @LEX@ +GREP := @GREP@ +INSTALL := @INSTALL@ +MKDIR := $(LLVM_SRC_ROOT)/autoconf/mkinstalldirs +MV := @MV@ +RANLIB := @RANLIB@ +RM := @RM@ +SED := @SED@ +TAR := @TAR@ +YACC := @YACC@ + +# Paths to miscellaneous programs we hope are present but might not be +PERL := @PERL@ +BZIP2 := @BZIP2@ +DOT := @DOT@ +DOXYGEN := @DOXYGEN@ +GROFF := @GROFF@ +GZIP := @GZIP@ +OCAMLC := @OCAMLC@ +OCAMLOPT := @OCAMLOPT@ +OCAMLDEP := @OCAMLDEP@ +POD2HTML := @POD2HTML@ +POD2MAN := @POD2MAN@ +RUNTEST := @RUNTEST@ +TCLSH := @TCLSH@ +ZIP := @ZIP@ + +HAVE_PERL := @HAVE_PERL@ +HAVE_PTHREAD := @HAVE_PTHREAD@ + +LIBS := @LIBS@ + +# Targets that we should build +TARGETS_TO_BUILD=@TARGETS_TO_BUILD@ + +# Path to location for LLVM C/C++ front-end. You can modify this if you +# want to override the value set by configure. +LLVMGCCDIR := @LLVMGCCDIR@ # Determine the target for which LLVM should generate code. +ifeq (@LLVMGCC_MAJVERS@,3) LLVMGCCARCH := @target@/3.4-llvm +else +LLVMGCCARCH := @target@/@LLVMGCC_VERSION@ +endif + +# Determine the path where the library executables are +LLVMGCCLIBEXEC := @LLVMGCCLIBEXEC@ # Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries: -LCC1 = @LLVMCC1@ -LCC1XX = @LLVMCC1PLUS@ +LLVMGCC := @LLVMGCC@ +LLVMGXX := @LLVMGXX@ +LLVMCC1 := @LLVMCC1@ +LLVMCC1PLUS := @LLVMCC1PLUS@ +LLVMGCC_VERSION := @LLVMGCC_VERSION@ +LLVMGCC_MAJVERS := @LLVMGCC_MAJVERS@ +LLVMGCC_LANGS := @LLVMGCC_LANGS@ # Path to directory where object files should be stored during a build. # Set OBJ_ROOT to "." if you do not want to use a separate place for # object files. OBJ_ROOT := . -# Path to location for LLVM front-end this should only be specified here if you -# want to override the value set in Makefile.$(uname) -LLVMGCCDIR := @LLVMGCCDIR@ - -# When this variable is set to 1, programs in the llvm/test/Programs hierarchy -# are not recompiled from source code. Instead, the bytecode for the file is -# pulled from the BYTECODE_REPOSITORY directory. This can be useful when disk -# space is limited or when you just don't want to spend time running the C -# frontend. -#USE_PRECOMPILED_BYTECODE := 1 -@UPB@ - -# This path specifies the cannonical location of bytecode files for compiled -# versions of the test/Programs/* programs. This is used as the bytecode source -# when USE_PRECOMPILED_BYTECODE is specified or when source code is not -# available for the program (such as SPEC). -BYTECODE_REPOSITORY := @BCR@ - -# SPEC benchmarks: -# If these are set then run the SPEC benchmarks. -# You must provide the SPEC benchmarks on your own. -@USE_SPEC2000@ -@USE_SPEC95@ - -# Path to the SPEC benchmarks. -SPEC2000_ROOT := @SPEC2000_ROOT@ -SPEC95_ROOT := @SPEC95_ROOT@ - -# Path to the Povray source code. -@USE_POVRAY@ -POVRAY_ROOT := @POVRAY_ROOT@ - -# Path to the PAPI code. This is used by the reoptimizer only. -#PAPIDIR := /home/vadve/shared/papi-2.3.4.1 -PAPIDIR := @PAPIDIR@ - # These are options that can either be enabled here, or can be enabled on the # make command line (ie, make ENABLE_PROFILING=1): -# When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are -# turned on, and Debug builds are turned off. +# When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put +# into the "Release" directories. Otherwise, LLVM code is not optimized and +# output is put in the "Debug" directories. #ENABLE_OPTIMIZED = 1 @ENABLE_OPTIMIZED@ +# When DISABLE_ASSERTIONS is enabled, builds of all of the LLVM code will +# exclude assertion checks, otherwise they are included. +#DISABLE_ASSERTIONS = 1 +@DISABLE_ASSERTIONS@ + +# When ENABLE_EXPENSIVE_CHECKS is enabled, builds of all of the LLVM +# code will include expensive checks, otherwise they are excluded. +#ENABLE_EXPENSIVE_CHECKS = 0 +@ENABLE_EXPENSIVE_CHECKS@ + +# When DEBUG_RUNTIME is enabled, the runtime libraries will retain debug +# symbols. +#DEBUG_RUNTIME = 1 +@DEBUG_RUNTIME@ + # When ENABLE_PROFILING is enabled, the llvm source base is built with profile # information to allow gprof to be used to get execution frequencies. #ENABLE_PROFILING = 1 +# When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built +ENABLE_DOXYGEN = @ENABLE_DOXYGEN@ + +# Do we want to enable threads? +ENABLE_THREADS := @ENABLE_THREADS@ + +# Do we want to build with position independent code? +ENABLE_PIC := @ENABLE_PIC@ + # This option tells the Makefiles to produce verbose output. # It essentially prints the commands that make is executing #VERBOSE = 1 # Enable JIT for this platform -@JIT@ - -# Disable LLC diffs for testing. -@DISABLE_LLC_DIFFS@ +TARGET_HAS_JIT = @TARGET_HAS_JIT@ -# Shared library extension for this platform. +# Shared library extension for host platform. SHLIBEXT = @SHLIBEXT@ -########################################################################### -# Directory Configuration -# This section of the Makefile determines what is where. To be -# specific, there are several locations that need to be defined: -# -# o LLVM_SRC_ROOT : The root directory of the LLVM source code. -# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code. -# -# o BUILD_SRC_DIR : The directory containing the code to build. -# o BUILD_SRC_ROOT : The root directory of the code to build. -# -# o BUILD_OBJ_DIR : The directory in which compiled code will be placed. -# o BUILD_OBJ_ROOT : The root directory in which compiled code is placed. -# -########################################################################### - -# Set the object build directory. By default, it is the current directory. -ifndef BUILD_OBJ_DIR -BUILD_OBJ_DIR := $(subst //,/,$(shell $(RPWD))) -endif +# Executable file extension for host platform. +EXEEXT = @EXEEXT@ -# Set the root of the object directory. -ifndef BUILD_OBJ_ROOT -BUILD_OBJ_ROOT := $(subst //,/,$(shell cd $(BUILD_OBJ_DIR)/$(LEVEL); $(RPWD))) -endif +# Things we just assume are "there" +ECHO := echo -# Set the source build directory. That is almost always the current directory. -ifndef BUILD_SRC_DIR -BUILD_SRC_DIR := $(subst //,/,@abs_top_srcdir@/$(patsubst $(BUILD_OBJ_ROOT)%,%,$(BUILD_OBJ_DIR))) -endif - -# Set the source root directory. -ifndef BUILD_SRC_ROOT -BUILD_SRC_ROOT := $(subst //,/,@abs_top_srcdir@) -endif +# Get the options for causing archives to link all their content instead of +# just missing symbols, and the inverse of that. This is used for certain LLVM +# tools that permit loadable modules. It ensures that the LLVM symbols will be +# available to those loadable modules. +LINKALL := @LINKALL@ +NOLINKALL := @NOLINKALL@ -# Set the LLVM object directory. -ifndef LLVM_OBJ_ROOT -ifdef LLVM_SRC_ROOT -LLVM_OBJ_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(RPWD)) -else -LLVM_OBJ_ROOT := $(BUILD_OBJ_ROOT) -endif -endif - -# Set the LLVM source directory. -# It is typically the root directory of what we're compiling now. -ifndef LLVM_SRC_ROOT -LLVM_SRC_ROOT := $(BUILD_SRC_ROOT) -endif - -# Set SourceDir for backwards compatbility. -ifndef SourceDir -SourceDir=$(BUILD_SRC_DIR) -endif +# Get the value of HUGE_VAL_SANITY which will be either "yes" or "no" depending +# on the check. +HUGE_VAL_SANITY = @HUGE_VAL_SANITY@ -# Installation directories, as provided by the configure script. -exec_prefix = @exec_prefix@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -bytecode_libdir = $(LLVMGCCDIR)/bytecode-libs -includedir = @includedir@ -infodir = @infodir@ -mandir = @mandir@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_DATA = @INSTALL_DATA@ +# Bindings that we should build +BINDINGS_TO_BUILD := @BINDINGS_TO_BUILD@ +ALL_BINDINGS := @ALL_BINDINGS@ +OCAML_LIBDIR := @OCAML_LIBDIR@