X-Git-Url: http://plrg.eecs.uci.edu/git/?p=oota-llvm.git;a=blobdiff_plain;f=Makefile.common;h=a157abaef274178cbfb12efda11b5230a73b9a5e;hp=915cd8a3f4a51ab5d4e31d3cfd4a3cd03e5d6b17;hb=e293d6c8d134ad352bb69defee17c5c902476933;hpb=481cc7c79ea328ae3941039cbe7c99ea30a5886e diff --git a/Makefile.common b/Makefile.common index 915cd8a3f4a..a157abaef27 100644 --- a/Makefile.common +++ b/Makefile.common @@ -1,15 +1,22 @@ -#===-- Makefile.common - Common make rules for LLVM -------*- makefile -*--==== +#===-- Makefile.common - Common make rules for LLVM --------*- Makefile -*--===# +# +# The LLVM Compiler Infrastructure +# +# This file is distributed under the University of Illinois Open Source +# License. See LICENSE.TXT for details. +# +#===------------------------------------------------------------------------===# # # This file is included by all of the LLVM makefiles. This file defines common -# rules to do things like compile a .cpp file or generate dependancy info. -# These are platform dependant, so this is the file used to specify these -# system dependant operations. +# rules to do things like compile a .cpp file or generate dependency info. +# These are platform dependent, so this is the file used to specify these +# system dependent operations. # # The following functionality can be set by setting incoming variables. # The variable $(LEVEL) *must* be set: # -# 1. LEVEL - The level of the current subdirectory from the top of the -# MagicStats view. This level should be expressed as a path, for +# 1. LEVEL - The level of the current subdirectory from the top of the +# source directory. This level should be expressed as a path, for # example, ../.. for two levels deep. # # 2. DIRS - A list of subdirectories to be built. Fake targets are set up @@ -21,10 +28,9 @@ # built in any order. All DIRS are built in order before PARALLEL_DIRS are # built, which are then built in any order. # -# 4. Source - If specified, this sets the source code filenames. If this -# is not set, it defaults to be all of the .cpp, .c, .y, and .l files -# in the current directory. Also, if you want to build files in addition -# to the local files, you can use the ExtraSource variable +# 4. SOURCES - If specified, this sets the source code filenames. If this +# is not set, it defaults to be all of the .cpp, .c, .y, and .l files +# in the current directory. # # 5. SourceDir - If specified, this specifies a directory that the source files # are in, if they are not in the current directory. This should include a @@ -32,807 +38,32 @@ # # 6. LLVM_SRC_ROOT - If specified, points to the top of the LLVM source tree. # -# 7. LLVM_OBJ_ROOT - If specified, points to the top directory where LLVM -# object files are placed. -# -# 8. BUILD_SRC_DIR - The directory which contains the current set of Makefiles +# 8. PROJ_SRC_DIR - The directory which contains the current set of Makefiles # and usually the source code too (unless SourceDir is set). # -# 9. BUILD_SRC_ROOT - The root directory of the source code being compiled. +# 9. PROJ_SRC_ROOT - The root directory of the source code being compiled. # -# 10. BUILD_OBJ_DIR - The directory where object code should be placed. +# 10. PROJ_OBJ_DIR - The directory where object code should be placed. # -# 11. BUILD_OBJ_ROOT - The root directory for where object code should be +# 11. PROJ_OBJ_ROOT - The root directory for where object code should be # placed. # # For building, -# LLVM, LLVM_SRC_ROOT = BUILD_SRC_ROOT, and -# LLVM_OBJ_ROOT = BUILD_OBJ_ROOT. +# LLVM, LLVM_SRC_ROOT = PROJ_SRC_ROOT +# #===-----------------------------------------------------------------------==== # # Configuration file to set paths specific to local installation of LLVM -# -include $(LEVEL)/Makefile.config - -########################################################################### -# Directory Configuration -# This section of the Makefile determines what is where. To be -# specific, there are several locations that need to be defined: -# -# o LLVM_SRC_ROOT : The root directory of the LLVM source code. -# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code. -# -# o BUILD_SRC_DIR : The directory containing the code to build. -# o BUILD_SRC_ROOT : The root directory of the code to build. -# -# o BUILD_OBJ_DIR : The directory in which compiled code will be placed. -# o BUILD_OBJ_ROOT : The root directory in which compiled code is placed. -# -########################################################################### - -# -# Set the source build directory. That is almost always the current directory. -# -ifndef BUILD_SRC_DIR -BUILD_SRC_DIR = $(shell pwd) -endif - -# -# Set the source root directory. -# -ifndef BUILD_SRC_ROOT -BUILD_SRC_ROOT = $(shell cd $(BUILD_SRC_DIR)/$(LEVEL); pwd) -endif - -# -# Determine the path of the source tree relative from $HOME (the mythical -# home directory). -# -HOME_OBJ_ROOT := $(OBJ_ROOT)$(patsubst $(HOME)%,%,$(BUILD_SRC_ROOT)) - -# -# Set the object build directory. Its location depends upon the source path -# and where object files should go. -# -ifndef BUILD_OBJ_DIR -ifeq ($(OBJ_ROOT),.) -BUILD_OBJ_DIR = $(BUILD_SRC_DIR) -else -BUILD_OBJ_DIR := $(HOME_OBJ_ROOT)$(patsubst $(BUILD_SRC_ROOT)%,%,$(BUILD_SRC_DIR)) -endif -endif - -# -# Set the root of the object directory. -# -ifndef BUILD_OBJ_ROOT -ifeq ($(OBJ_ROOT),.) -BUILD_OBJ_ROOT = $(BUILD_SRC_ROOT) -else -BUILD_OBJ_ROOT := $(HOME_OBJ_ROOT) -endif -endif - -# -# Set the LLVM source directory. -# It is typically the root directory of what we're compiling now. -# -ifndef LLVM_SRC_ROOT -LLVM_SRC_ROOT := $(BUILD_SRC_ROOT) -endif - -# -# Set the LLVM object directory. # ifndef LLVM_OBJ_ROOT -LLVM_OBJ_ROOT := $(BUILD_OBJ_ROOT) -endif - -########################################################################### -# Default Targets: -# The following targets are the standard top level targets for -# building. -########################################################################### - -ifdef SHARED_LIBRARY -# if SHARED_LIBRARY is specified, the default is to build the dynamic lib -all:: dynamic -endif - -ifdef BYTECODE_LIBRARY -# if BYTECODE_LIBRARY is specified, the default is to build the bytecode lib -all:: bytecodelib -install:: bytecodelib-install -endif - -# Default Rule: Make sure it's also a :: rule -all :: - -# Default for install is to at least build everything... -install :: - -# Default rule for test. It ensures everything has a test rule -test:: - -# Default rule for building only bytecode. -bytecode:: - -# Print out the directories used for building -prdirs:: - echo "Home Offset : " $(HOME_OBJ_ROOT); - echo "Build Source Root: " $(BUILD_SRC_ROOT); - echo "Build Source Dir : " $(BUILD_SRC_DIR); - echo "Build Object Root: " $(BUILD_OBJ_ROOT); - echo "Build Object Dir : " $(BUILD_OBJ_DIR); - echo "LLVM Source Root: " $(LLVM_SRC_ROOT); - echo "LLVM Object Root: " $(LLVM_OBJ_ROOT); - -# -# Mark all of these targets as phony. This will hopefully speed up builds -# slightly since GNU Make will not try to find implicit rules for targets -# which are marked as Phony. -# -.PHONY: all dynamic bytecodelib bytecodelib-install -.PHONY: clean distclean install test bytecode prdirs - -########################################################################### -# Miscellaneous paths and commands: -# This section defines various configuration macros, such as where -# to find burg, tblgen, and libtool. -########################################################################### - -#-------------------------------------------------------------------- -# Variables derived from configuration options... -#-------------------------------------------------------------------- - -#BinInstDir=/usr/local/bin -#LibInstDir=/usr/local/lib/xxx -#DocInstDir=/usr/doc/xxx - -BURG_OPTS = -I - -ifdef ENABLE_PROFILING - ENABLE_OPTIMIZED = 1 - CONFIGURATION := Profile -else - ifdef ENABLE_OPTIMIZED - CONFIGURATION := Release - else - CONFIGURATION := Debug - endif -endif - -# -# Enable this for profiling support with 'gprof' -# This automatically enables optimized builds. -# -ifdef ENABLE_PROFILING - PROFILE = -pg -endif - -# -# Suffixes for library compilation rules -# -.SUFFIXES: .so - -########################################################################### -# Library Locations: -# These variables describe various library locations: -# -# DEST* = Location of where libraries that are built will be placed. -# LLVM* = Location of LLVM libraries used for linking. -# PROJ* = Location of previously built libraries used for linking. -########################################################################### - -# Libraries that are being built -DESTLIBDEBUG := $(BUILD_OBJ_ROOT)/lib/Debug -DESTLIBRELEASE := $(BUILD_OBJ_ROOT)/lib/Release -DESTLIBPROFILE := $(BUILD_OBJ_ROOT)/lib/Profile -DESTLIBBYTECODE := $(BUILD_OBJ_ROOT)/lib/Bytecode -DESTLIBCURRENT := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION) - -# LLVM libraries used for linking -LLVMLIBDEBUGSOURCE := $(LLVM_OBJ_ROOT)/lib/Debug -LLVMLIBRELEASESOURCE := $(LLVM_OBJ_ROOT)/lib/Release -LLVMLIBPROFILESOURCE := $(LLVM_OBJ_ROOT)/lib/Profile -LLVMLIBCURRENTSOURCE := $(LLVM_OBJ_ROOT)/lib/$(CONFIGURATION) - -# Libraries that were built that will now be used for linking -PROJLIBDEBUGSOURCE := $(BUILD_OBJ_ROOT)/lib/Debug -PROJLIBRELEASESOURCE := $(BUILD_OBJ_ROOT)/lib/Release -PROJLIBPROFILESOURCE := $(BUILD_OBJ_ROOT)/lib/Profile -PROJLIBCURRENTSOURCE := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION) - -########################################################################### -# Tool Locations -# These variables describe various tool locations: -# -# DEST* = Location of where tools that are built will be placed. -# LLVM* = Location of LLVM tools used for building. -# PROJ* = Location of previously built tools used for linking. -########################################################################### - -DESTTOOLDEBUG := $(BUILD_OBJ_ROOT)/tools/Debug -DESTTOOLRELEASE := $(BUILD_OBJ_ROOT)/tools/Release -DESTTOOLPROFILE := $(BUILD_OBJ_ROOT)/tools/Profile -DESTTOOLCURRENT := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION) - -LLVMTOOLDEBUG := $(LLVM_OBJ_ROOT)/tools/Debug -LLVMTOOLRELEASE := $(LLVM_OBJ_ROOT)/tools/Release -LLVMTOOLPROFILE := $(LLVM_OBJ_ROOT)/tools/Profile -LLVMTOOLCURRENT := $(LLVM_OBJ_ROOT)/tools/$(CONFIGURATION) - -PROJTOOLDEBUG := $(BUILD_OBJ_ROOT)/tools/Debug -PROJTOOLRELEASE := $(BUILD_OBJ_ROOT)/tools/Release -PROJTOOLPROFILE := $(BUILD_OBJ_ROOT)/tools/Profile -PROJTOOLCURRENT := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION) - -# -# Libtool is found in the current directory. -# -LIBTOOL := $(LLVM_SRC_ROOT)/mklib - -# -# If we're not building a shared library, use the disable-shared tag with -# libtool. This will disable the building of objects for shared libraries and -# only generate static library objects. -# -# For dynamic libraries, we'll take the performance hit for now, since we -# almost never build them. -# -# This should speed up compilation and require no modifications to future -# versions of libtool. -# -ifndef SHARED_LIBRARY -LIBTOOL += --tag=disable-shared -endif - -# -# Verbosity levels -# -ifndef VERBOSE -VERB := @ -LIBTOOL += --silent -endif - -########################################################################### -# Miscellaneous paths and commands (part deux): -# This section defines various configuration macros, such as where -# to find burg, tblgen, and libtool. -########################################################################### - -#-------------------------------------------------------------------------- -# Utilities used while building the LLVM tree, which live in the utils dir -# -BURG := $(LLVMTOOLCURRENT)/burg -RunBurg := $(BURG) $(BURG_OPTS) -TBLGEN := $(LLVMTOOLCURRENT)/tblgen - -#-------------------------------------------------------------------------- -# The LLVM GCC front-end in C and C++ flavors -# -LLVMGCC := $(LLVMGCCDIR)/bin/gcc -LCC1 := $(LLVMGCCDIR)/lib/gcc-lib/$(LLVMGCCARCH)/cc1 -LLVMGXX := $(LLVMGCCDIR)/bin/g++ -LCC1XX := $(LLVMGCCDIR)/lib/gcc-lib/$(LLVMGCCARCH)/cc1plus - -#-------------------------------------------------------------------------- -# Some of the compiled LLVM tools which are used for compilation of runtime -# libraries. -# -LLVMAS := $(LLVMTOOLCURRENT)/as - - -########################################################################### -# Compile Time Flags -########################################################################### - -# -# Include both the project headers and the LLVM headers for compilation and -# dependency computation. -# -CPPFLAGS += -I$(BUILD_SRC_ROOT)/include -I$(LLVM_SRC_ROOT)/include - -# By default, strip symbol information from executable -ifndef KEEP_SYMBOLS -STRIP = $(PLATFORMSTRIPOPTS) -STRIP_WARN_MSG = "(without symbols)" -endif - -# Allow gnu extensions... -CPPFLAGS += -D_GNU_SOURCE - -CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused -I$(LEVEL)/include -CompileOptimizeOpts := -O3 -DNDEBUG -finline-functions -fshort-enums - -# -# Compile commands with libtool. -# -Compile := $(LIBTOOL) --mode=compile $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $(CompileCommonOpts) -CompileC := $(LIBTOOL) --mode=compile $(CC) -c $(CPPFLAGS) $(CCFLAGS) $(CompileCommonOpts) - -# Compile a cpp file, don't link... -CompileG := $(Compile) -g -D_DEBUG -CompileO := $(Compile) $(CompileOptimizeOpts) -felide-constructors -fomit-frame-pointer -CompileP := $(Compile) $(CompileOptimizeOpts) -felide-constructors $(PROFILE) - -# Compile a c file, don't link... -CompileCG := $(CompileC) -g -D_DEBUG -CompileCO := $(CompileC) $(CompileOptimizeOpts) -fomit-frame-pointer -CompileCP := $(CompileC) $(CompileOptimizeOpts) $(PROFILE) - -########################################################################### -# Link Time Options -########################################################################### - -# -# Link final executable -# (Note that we always link with the C++ compiler). -# -Link := $(LIBTOOL) --mode=link $(CXX) - -# link both projlib and llvmlib libraries -LinkG := $(Link) -g -L$(PROJLIBDEBUGSOURCE) -L$(LLVMLIBDEBUGSOURCE) $(STRIP) -LinkO := $(Link) -O3 -L$(PROJLIBRELEASESOURCE) -L$(LLVMLIBRELEASESOURCE) -LinkP := $(Link) -O3 -L$(PROJLIBPROFILESOURCE) -L$(LLVMLIBPROFILESOURCE) $(PROFILE) - -# Create one .o file from a bunch of .o files... -Relink := ${LIBTOOL} --mode=link $(CXX) -ifndef SHARED_LIBRARY -Relink += -only-static -endif - -# -# Configure where the item being compiled should go. -# -ifdef SHARED_LIBRARY -Link += -rpath $(DESTLIBCURRENT) -endif - -ifdef TOOLNAME -Link += -rpath $(DESTTOOLCURRENT) -endif - -# Create dependancy file from CPP file, send to stdout. -Depend := $(CXX) -MM -I$(LEVEL)/include $(CPPFLAGS) -DependC := $(CC) -MM -I$(LEVEL)/include $(CPPFLAGS) - -# Archive a bunch of .o files into a .a file... -AR = ${AR_PATH} cq - -#---------------------------------------------------------- - -# Source includes all of the cpp files, and objects are derived from the -# source files... -# The local Makefile can list other Source files via ExtraSource = ... -# -ifndef Source -Source := $(ExtraSource) $(wildcard *.cpp *.c *.y *.l) -endif - -# -# Libtool Objects -# -Srcs := $(sort $(notdir $(basename $(Source)))) -Objs := $(addsuffix .lo, $(Srcs)) -ObjectsO := $(addprefix $(BUILD_OBJ_DIR)/Release/,$(Objs)) -ObjectsP := $(addprefix $(BUILD_OBJ_DIR)/Profile/,$(Objs)) -ObjectsG := $(addprefix $(BUILD_OBJ_DIR)/Debug/,$(Objs)) -ObjectsBC := $(addprefix $(BUILD_OBJ_DIR)/Bytecode/,$(addsuffix .bc, $(Srcs))) - -# -# The real objects underlying the libtool objects -# -RObjs := $(sort $(patsubst Debug/%.o, %.o, $(addsuffix .o,$(notdir $(basename $(Source)))))) -RObjectsO := $(addprefix $(BUILD_OBJ_DIR)/Release/,$(RObjs)) -RObjectsP := $(addprefix $(BUILD_OBJ_DIR)/Profile/,$(RObjs)) -RObjectsG := $(addprefix $(BUILD_OBJ_DIR)/Debug/,$(RObjs)) - -#--------------------------------------------------------- -# Handle the DIRS and PARALLEL_DIRS options -#--------------------------------------------------------- - -ifdef DIRS -all install clean test bytecode :: - $(VERB) for dir in ${DIRS}; do \ - (cd $$dir; $(MAKE) $@) || exit 1; \ - done -endif - -# Handle PARALLEL_DIRS -ifdef PARALLEL_DIRS -all :: $(addsuffix /.makeall , $(PARALLEL_DIRS)) -install :: $(addsuffix /.makeinstall , $(PARALLEL_DIRS)) -clean :: $(addsuffix /.makeclean , $(PARALLEL_DIRS)) -test :: $(addsuffix /.maketest , $(PARALLEL_DIRS)) -bytecode :: $(addsuffix /.makebytecode, $(PARALLEL_DIRS)) - -%/.makeall %/.makeinstall %/.makeclean %/.maketest %/.makebytecode: - $(VERB) cd $(@D); $(MAKE) $(subst $(@D)/.make,,$@) -endif - -# Handle directories that may or may not exist -ifdef OPTIONAL_DIRS -all install clean test bytecode :: - $(VERB) for dir in ${OPTIONAL_DIRS}; do \ - if [ -d $$dir ]; \ - then\ - (cd $$dir; $(MAKE) $@) || exit 1; \ - fi \ - done -endif - -########################################################################### -# Library Build Rules: -# -#--------------------------------------------------------- -# Handle the LIBRARYNAME option - used when building libs... -#--------------------------------------------------------- -# -# When libraries are built, they are allowed to optionally define the -# DONT_BUILD_RELINKED make variable, which, when defined, prevents a .o file -# from being built for the library. This .o files may then be linked to by a -# tool if the tool does not need (or want) the semantics a .a file provides -# (linking in only object files that are "needed"). If a library is never to -# be used in this way, it is better to define DONT_BUILD_RELINKED, and define -# BUILD_ARCHIVE instead. -# -# Some libraries must be built as .a files (libscalar for example) because if -# it's built as a .o file, then all of the constituent .o files in it will be -# linked into tools (for example gccas) even if they only use one of the parts -# of it. For this reason, sometimes it's useful to use libraries as .a files. -########################################################################### - -ifdef LIBRARYNAME - -# Make sure there isn't any extranous whitespace on the LIBRARYNAME option -LIBRARYNAME := $(strip $(LIBRARYNAME)) - -LIBNAME_O := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).so -LIBNAME_P := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).so -LIBNAME_G := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).so -LIBNAME_AO := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).a -LIBNAME_AP := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).a -LIBNAME_AG := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).a -LIBNAME_OBJO := $(DESTLIBRELEASE)/$(LIBRARYNAME).o -LIBNAME_OBJP := $(DESTLIBPROFILE)/$(LIBRARYNAME).o -LIBNAME_OBJG := $(DESTLIBDEBUG)/$(LIBRARYNAME).o -LIBNAME_BC := $(DESTLIBBYTECODE)/lib$(LIBRARYNAME).bc - -#-------------------------------------------------------------------- -# Library Targets -# Modify the top level targets to build the desired libraries. -#-------------------------------------------------------------------- - -# dynamic target builds a shared object version of the library... -dynamic:: $(DESTLIBCURRENT)/lib$(LIBRARYNAME).so -bytecodelib:: $(LIBNAME_BC) -bytecodelib-install:: $(LLVMGCCDIR)/bytecode-libs/lib$(LIBRARYNAME).bc - -$(LLVMGCCDIR)/bytecode-libs/lib$(LIBRARYNAME).bc: $(LIBNAME_BC) - @echo ======= Installing $(LIBRARYNAME) bytecode library ======= - cp $< $@ - -# Does the library want a .o version built? -ifndef DONT_BUILD_RELINKED -all:: $(DESTLIBCURRENT)/$(LIBRARYNAME).o -endif - -# Does the library want an archive version built? -ifdef BUILD_ARCHIVE -all:: $(DESTLIBCURRENT)/lib$(LIBRARYNAME).a -endif - -#-------------------------------------------------------------------- -# Rules for building libraries -#-------------------------------------------------------------------- - -LinkBCLib := $(LLVMGCC) -shared -ifdef EXPORTED_SYMBOL_LIST -LinkBCLib += -Xlinker -internalize-public-api-list=$(EXPORTED_SYMBOL_LIST) -else -LinkBCLib += -Xlinker -disable-internalize -endif - - -# Rule for building bytecode libraries. -$(LIBNAME_BC): $(ObjectsBC) $(LibSubDirs) - @echo ======= Linking $(LIBRARYNAME) bytecode library ======= - $(VERB) $(LinkBCLib) -o $@ $(ObjectsBC) $(LibSubDirs) $(LibLinkOpts) -# -# Rules for building dynamically linked libraries. -# -$(LIBNAME_O): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir - @echo ======= Linking $(LIBRARYNAME) dynamic release library ======= - $(VERB) $(Link) -o $*.la $(ObjectsO) $(LibSubDirs) $(LibLinkOpts); - $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $*.la $(DESTLIBCURRENT); - -$(LIBNAME_P): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir - @echo ======= Linking $(LIBRARYNAME) dynamic profile library ======= - $(VERB) $(Link) -o $*.la $(ObjectsP) $(LibSubDirs) $(LibLinkOpts); - $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $*.la $(DESTLIBCURRENT); - -$(LIBNAME_G): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir - @echo ======= Linking $(LIBRARYNAME) dynamic debug library ======= - $(VERB) $(Link) -o $*.la $(ObjectsG) $(LibSubDirs) $(LibLinkOpts); - $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $*.la $(DESTLIBCURRENT); - -# -# Rules for building static archive libraries. -# -$(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir - @echo ======= Linking $(LIBRARYNAME) archive release library ======= - @$(RM) -f $@ - $(VERB) $(Link) -03 -o $@ $(ObjectsO) $(LibSubDirs) -static - -$(LIBNAME_AP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir - @echo ======= Linking $(LIBRARYNAME) archive profile library ======= - @$(RM) -f $@ - $(VERB) $(Link) -03 $(PROFILE) -o $@ $(ObjectsP) $(LibSubDirs) -static - -$(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir - @echo ======= Linking $(LIBRARYNAME) archive debug library ======= - @$(RM) -f $@ - $(VERB) $(Link) -g $(STRIP) -o $@ $(ObjectsG) $(LibSubDirs) -static - - -# -# Rules for building .o libraries. -# -# JTC: -# Note that for this special case, we specify the actual object files -# instead of their libtool counterparts. This is because libtool -# doesn't want to generate a reloadable object file unless it is given -# .o files explicitly. -# -# Note that we're making an assumption here: If we build a .lo file, -# it's corresponding .o file will be placed in the same directory. -# -# I think that is safe. -# -$(LIBNAME_OBJO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir - @echo "Linking $@" - $(VERB) $(Relink) -o $@ $(RObjectsO) $(LibSubDirs) - -$(LIBNAME_OBJP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir - @echo "Linking $@" - $(VERB) $(Relink) -o $@ $(RObjectsP) $(LibSubDirs) - -$(LIBNAME_OBJG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir - @echo "Linking $@" - $(VERB) $(Relink) -o $@ $(RObjectsG) $(LibSubDirs) - -endif - -#------------------------------------------------------------------------ -# Create a TAGS database for emacs -#------------------------------------------------------------------------ - -ifdef ETAGS -ifeq ($(LEVEL), .) -tags: - $(ETAGS) -l c++ `find include lib tools -name '*.cpp' -o -name '*.h'` -all:: tags -endif +include $(LEVEL)/Makefile.config else -tags: - ${ECHO} "Cannot build $@: The program etags is not installed" +include $(LLVM_OBJ_ROOT)/Makefile.config endif -#------------------------------------------------------------------------ -# Handle the TOOLNAME option - used when building tool executables... -#------------------------------------------------------------------------ -# -# The TOOLNAME option should be used with a USEDLIBS variable that tells the -# libraries (and the order of the libs) that should be linked to the -# tool. USEDLIBS should contain a list of library names (some with .a extension) -# that are automatically linked in as .o files unless the .a suffix is added. -# -ifdef TOOLNAME - -# TOOLEXENAME* - These compute the output filenames to generate... -TOOLEXENAME_G := $(DESTTOOLDEBUG)/$(TOOLNAME) -TOOLEXENAME_O := $(DESTTOOLRELEASE)/$(TOOLNAME) -TOOLEXENAME_P := $(DESTTOOLPROFILE)/$(TOOLNAME) -TOOLEXENAMES := $(DESTTOOLCURRENT)/$(TOOLNAME) - -# USED_LIBS_OPTIONS - Compute the options line that add -llib1 -llib2, etc. -PROJ_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS))) -PROJ_LIBS_OPTIONS_G := $(patsubst %.o, $(PROJLIBDEBUGSOURCE)/%.o, $(PROJ_LIBS_OPTIONS)) -PROJ_LIBS_OPTIONS_O := $(patsubst %.o, $(PROJLIBRELEASESOURCE)/%.o,$(PROJ_LIBS_OPTIONS)) -PROJ_LIBS_OPTIONS_P := $(patsubst %.o, $(PROJLIBPROFILESOURCE)/%.o,$(PROJ_LIBS_OPTIONS)) - -LLVM_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS))) -LLVM_LIBS_OPTIONS_G := $(patsubst %.o, $(LLVMLIBDEBUGSOURCE)/%.o, $(LLVM_LIBS_OPTIONS)) -LLVM_LIBS_OPTIONS_O := $(patsubst %.o, $(LLVMLIBRELEASESOURCE)/%.o,$(LLVM_LIBS_OPTIONS)) -LLVM_LIBS_OPTIONS_P := $(patsubst %.o, $(LLVMLIBPROFILESOURCE)/%.o,$(LLVM_LIBS_OPTIONS)) - -LIB_OPTS_G := $(LLVM_LIBS_OPTIONS_G) $(PROJ_LIBS_OPTIONS_G) -LIB_OPTS_O := $(LLVM_LIBS_OPTIONS_O) $(PROJ_LIBS_OPTIONS_O) -LIB_OPTS_P := $(LLVM_LIBS_OPTIONS_P) $(PROJ_LIBS_OPTIONS_P) - -# USED_LIB_PATHS - Compute the path of the libraries used so that tools are -# rebuilt if libraries change. This has to make sure to handle .a/.so and .o -# files separately. # -STATICUSEDLIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS))) -USED_LIB_PATHS_G := $(addprefix $(DESTLIBDEBUG)/, $(STATICUSEDLIBS)) -USED_LIB_PATHS_O := $(addprefix $(DESTLIBRELEASE)/, $(STATICUSEDLIBS)) -USED_LIB_PATHS_P := $(addprefix $(DESTLIBPROFILE)/, $(STATICUSEDLIBS)) -#LINK_OPTS := $(TOOLLINKOPTS) $(PLATFORMLINKOPTS) - -# -# Libtool link options: -# Ensure that all binaries have their symbols exported so that they can -# by dlsym'ed. +# Include all of the build rules used for making LLVM # -LINK_OPTS := -export-dynamic $(TOOLLINKOPTS) - - - - - -# Tell make that we need to rebuild subdirectories before we can link the tool. -# This affects things like LLI which has library subdirectories. -$(USED_LIB_PATHS_G) $(USED_LIB_PATHS_O) $(USED_LIB_PATHS_P): \ - $(addsuffix /.makeall, $(PARALLEL_DIRS)) - -all:: $(TOOLEXENAMES) - -clean:: - $(VERB) $(RM) -f $(TOOLEXENAMES) - -$(TOOLEXENAME_G): $(ObjectsG) $(USED_LIB_PATHS_G) $(DESTTOOLDEBUG)/.dir - @echo ======= Linking $(TOOLNAME) debug executable $(STRIP_WARN_MSG) ======= - $(VERB) $(LinkG) -o $@ $(ObjectsG) $(LIB_OPTS_G) $(LINK_OPTS) $(LIBS) - -$(TOOLEXENAME_O): $(ObjectsO) $(USED_LIB_PATHS_O) $(DESTTOOLRELEASE)/.dir - @echo ======= Linking $(TOOLNAME) release executable ======= - $(VERB) $(LinkO) -o $@ $(ObjectsO) $(LIB_OPTS_O) $(LINK_OPTS) $(LIBS) - -$(TOOLEXENAME_P): $(ObjectsP) $(USED_LIB_PATHS_P) $(DESTTOOLPROFILE)/.dir - @echo ======= Linking $(TOOLNAME) profile executable ======= - $(VERB) $(LinkP) -o $@ $(ObjectsP) $(LIB_OPTS_P) $(LINK_OPTS) $(LIBS) - -endif - - - -#--------------------------------------------------------- -.PRECIOUS: $(BUILD_OBJ_DIR)/Depend/.dir $(BUILD_OBJ_DIR)/Bytecode/.dir -.PRECIOUS: $(BUILD_OBJ_DIR)/Debug/.dir $(BUILD_OBJ_DIR)/Release/.dir - -# Create .lo files in the ObjectFiles directory from the .cpp and .c files... -$(BUILD_OBJ_DIR)/Release/%.lo: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Release/.dir - @echo "Compiling $<" - $(VERB) $(CompileO) $< -o $@ - -$(BUILD_OBJ_DIR)/Release/%.lo: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Release/.dir - @echo "Compiling $<" - $(VERB) $(CompileCO) $< -o $@ +include $(LLVM_SRC_ROOT)/Makefile.rules -$(BUILD_OBJ_DIR)/Profile/%.lo: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Profile/.dir - @echo "Compiling $<" - $(VERB) $(CompileP) $< -o $@ - -$(BUILD_OBJ_DIR)/Profile/%.lo: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Profile/.dir - @echo "Compiling $<" - $(VERB) $(CompileCP) $< -o $@ - -$(BUILD_OBJ_DIR)/Debug/%.lo: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Debug/.dir - @echo "Compiling $<" - $(VERB) $(CompileG) $< -o $@ - -$(BUILD_OBJ_DIR)/Debug/%.lo: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Debug/.dir - @echo "Compiling $<" - $(VERB) $(CompileCG) $< -o $@ - -$(BUILD_OBJ_DIR)/Bytecode/%.bc: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Bytecode/.dir $(LCC1XX) - @echo "Compiling $< to bytecode" - $(VERB) $(LLVMGXX) $(CPPFLAGS) -c $< -o $@ - -$(BUILD_OBJ_DIR)/Bytecode/%.bc: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Bytecode/.dir $(LCC1) - @echo "Compiling $< to bytecode" - $(VERB) $(LLVMGCC) $(CPPFLAGS) -c $< -o $@ - -$(BUILD_OBJ_DIR)/Bytecode/%.bc: $(SourceDir)%.ll $(BUILD_OBJ_DIR)/Bytecode/.dir $(LCC1) - @echo "Compiling $< to bytecode" - $(VERB) $(LLVMAS) $< -f -o $@ - - -# -# Rules for building lex/yacc files -# -LEX_FILES = $(filter %.l, $(Source)) -LEX_OUTPUT = $(LEX_FILES:%.l=%.cpp) -YACC_FILES = $(filter %.y, $(Source)) -YACC_OUTPUT = $(addprefix $(YACC_FILES:%.y=%), .h .cpp .output) -.PRECIOUS: $(LEX_OUTPUT) $(YACC_OUTPUT) - -# Create a .cpp source file from a flex input file... this uses sed to cut down -# on the warnings emited by GCC... -# -# The last line is a gross hack to work around flex aparently not being able to -# resize the buffer on a large token input. Currently, for uninitialized string -# buffers in LLVM we can generate very long tokens, so this is a hack around it. -# FIXME. (f.e. char Buffer[10000]; ) -# -%.cpp: %.l - @echo Flex\'ing $<... - $(VERB) $(FLEX) -t $< | \ - $(SED) '/^find_rule/d' | \ - $(SED) 's/void yyunput/inline void yyunput/' | \ - $(SED) 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \ - $(SED) 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' \ - > $@.tmp - $(VERB) cmp -s $@ $@.tmp > /dev/null || ${MV} -f $@.tmp $@ - @# remove the output of flex if it didn't get moved over... - @rm -f $@.tmp - -# Rule for building the bison parsers... -%.c: %.y # Cancel built-in rules for yacc -%.h: %.y # Cancel built-in rules for yacc -%.cpp %.h : %.y - @echo Bison\'ing $<... - $(VERB) $(BISON) -v -d -p $(<:%Parser.y=%) $*.y - $(VERB) cmp -s $*.tab.c $*.cpp > /dev/null || ${MV} -f $*.tab.c $*.cpp - $(VERB) cmp -s $*.tab.h $*.h > /dev/null || ${MV} -f $*.tab.h $*.h - @# If the files were not updated, don't leave them lying around... - @rm -f $*.tab.c $*.tab.h - -# To create the directories... -%/.dir: - $(VERB) ${MKDIR} $* > /dev/null - @$(DATE) > $@ - -# To create postscript files from dot files... -ifdef DOT -%.ps: %.dot - ${DOT} -Tps < $< > $@ -else -%.ps: %.dot - ${ECHO} "Cannot build $@: The program dot is not installed" -endif - -# 'make clean' nukes the tree -clean:: - $(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/Debug $(BUILD_OBJ_DIR)/Release - $(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/Profile $(BUILD_OBJ_DIR)/Depend - $(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/Bytecode - $(VERB) $(RM) -f core core.[0-9][0-9]* *.o *.d *.so *~ *.flc - $(VERB) $(RM) -f $(LEX_OUTPUT) $(YACC_OUTPUT) - -########################################################################### -# C/C++ Dependencies -# Define variables and rules that generate header file dependencies -# from C/C++ source files. -########################################################################### - -# If dependencies were generated for the file that included this file, -# include the dependancies now... -# -SourceBaseNames := $(basename $(notdir $(filter-out Debug/%, $(Source)))) -SourceDepend := $(SourceBaseNames:%=$(BUILD_OBJ_DIR)/Depend/%.d) - -# Create dependencies for the *.cpp files... -#$(SourceDepend): \x -$(BUILD_OBJ_DIR)/Depend/%.d: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Depend/.dir - $(VERB) $(Depend) $< | $(SED) 's|\.o|\.lo|' | $(SED) 's|$*\.lo *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@ - -# Create dependencies for the *.c files... -#$(SourceDepend): \x -$(BUILD_OBJ_DIR)/Depend/%.d: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Depend/.dir - $(VERB) $(DependC) -o $@ $< | $(SED) 's|\.o|\.lo|' | $(SED) 's|$*\.lo *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@ - -# -# Include dependencies generated from C/C++ source files, but not if we -# are cleaning (this example taken from the GNU Make Manual). -# -ifneq ($(MAKECMDGOALS),clean) -ifneq ($(MAKECMDGOALS),distclean) -ifneq ($(SourceDepend),) --include $(SourceDepend) -endif -endif -endif