def GetLo32XForm : SDNodeXForm<imm, [{
// Transformation function: get the low 32 bits.
- return getI32Imm((unsigned)N->getZExtValue());
+ return getI32Imm((unsigned)N->getZExtValue(), SDLoc(N));
}]>;
def GetLo8XForm : SDNodeXForm<imm, [{
// Transformation function: get the low 8 bits.
- return getI8Imm((uint8_t)N->getZExtValue());
+ return getI8Imm((uint8_t)N->getZExtValue(), SDLoc(N));
}]>;
// PIC base construction. This expands to code that looks like this:
// call $next_inst
// popl %destreg"
-let neverHasSideEffects = 1, isNotDuplicable = 1, Uses = [ESP] in
+let hasSideEffects = 0, isNotDuplicable = 1, Uses = [ESP] in
def MOVPC32r : Ii32<0xE8, Pseudo, (outs GR32:$reg), (ins i32imm:$label),
"", []>;
// Pessimistically assume ADJCALLSTACKDOWN / ADJCALLSTACKUP will become
// sub / add which can clobber EFLAGS.
let Defs = [ESP, EFLAGS], Uses = [ESP] in {
-def ADJCALLSTACKDOWN32 : I<0, Pseudo, (outs), (ins i32imm:$amt),
+def ADJCALLSTACKDOWN32 : I<0, Pseudo, (outs), (ins i32imm:$amt1, i32imm:$amt2),
"#ADJCALLSTACKDOWN",
- [(X86callseq_start timm:$amt)]>,
- Requires<[Not64BitMode]>;
+ []>,
+ Requires<[NotLP64]>;
def ADJCALLSTACKUP32 : I<0, Pseudo, (outs), (ins i32imm:$amt1, i32imm:$amt2),
"#ADJCALLSTACKUP",
[(X86callseq_end timm:$amt1, timm:$amt2)]>,
- Requires<[Not64BitMode]>;
+ Requires<[NotLP64]>;
}
+def : Pat<(X86callseq_start timm:$amt1),
+ (ADJCALLSTACKDOWN32 i32imm:$amt1, 0)>, Requires<[NotLP64]>;
+
// ADJCALLSTACKDOWN/UP implicitly use/def RSP because they may be expanded into
// a stack adjustment and the codegen must know that they may modify the stack
// Pessimistically assume ADJCALLSTACKDOWN / ADJCALLSTACKUP will become
// sub / add which can clobber EFLAGS.
let Defs = [RSP, EFLAGS], Uses = [RSP] in {
-def ADJCALLSTACKDOWN64 : I<0, Pseudo, (outs), (ins i32imm:$amt),
+def ADJCALLSTACKDOWN64 : I<0, Pseudo, (outs), (ins i32imm:$amt1, i32imm:$amt2),
"#ADJCALLSTACKDOWN",
- [(X86callseq_start timm:$amt)]>,
- Requires<[In64BitMode]>;
+ []>,
+ Requires<[IsLP64]>;
def ADJCALLSTACKUP64 : I<0, Pseudo, (outs), (ins i32imm:$amt1, i32imm:$amt2),
"#ADJCALLSTACKUP",
[(X86callseq_end timm:$amt1, timm:$amt2)]>,
- Requires<[In64BitMode]>;
+ Requires<[IsLP64]>;
}
-
+def : Pat<(X86callseq_start timm:$amt1),
+ (ADJCALLSTACKDOWN64 i32imm:$amt1, 0)>, Requires<[IsLP64]>;
// x86-64 va_start lowering magic.
"# variable sized alloca for segmented stacks",
[(set GR32:$dst,
(X86SegAlloca GR32:$size))]>,
- Requires<[Not64BitMode]>;
+ Requires<[NotLP64]>;
let Defs = [RAX, RSP, EFLAGS], Uses = [RSP] in
def SEG_ALLOCA_64 : I<0, Pseudo, (outs GR64:$dst), (ins GR64:$size),
Requires<[In64BitMode]>;
}
-// The MSVC runtime contains an _ftol2 routine for converting floating-point
-// to integer values. It has a strange calling convention: the input is
-// popped from the x87 stack, and the return value is given in EDX:EAX. ECX is
-// used as a temporary register. No other registers (aside from flags) are
-// touched.
-// Microsoft toolchains do not support 80-bit precision, so a WIN_FTOL_80
-// variant is unnecessary.
-
-let Defs = [EAX, EDX, ECX, EFLAGS], FPForm = SpecialFP in {
- def WIN_FTOL_32 : I<0, Pseudo, (outs), (ins RFP32:$src),
- "# win32 fptoui",
- [(X86WinFTOL RFP32:$src)]>,
- Requires<[Not64BitMode]>;
-
- def WIN_FTOL_64 : I<0, Pseudo, (outs), (ins RFP64:$src),
- "# win32 fptoui",
- [(X86WinFTOL RFP64:$src)]>,
- Requires<[Not64BitMode]>;
-}
-
//===----------------------------------------------------------------------===//
// EH Pseudo Instructions
//
}
+let isTerminator = 1, hasSideEffects = 1, isBarrier = 1, hasCtrlDep = 1,
+ isCodeGenOnly = 1, isReturn = 1 in {
+ def CLEANUPRET : I<0, Pseudo, (outs), (ins), "# CLEANUPRET", [(cleanupret)]>;
+
+ // CATCHRET needs a custom inserter for SEH.
+ let usesCustomInserter = 1 in
+ def CATCHRET : I<0, Pseudo, (outs), (ins brtarget32:$dst, brtarget32:$from),
+ "# CATCHRET",
+ [(catchret bb:$dst, bb:$from)]>;
+}
+
+let hasSideEffects = 1, hasCtrlDep = 1, isCodeGenOnly = 1,
+ usesCustomInserter = 1 in
+def CATCHPAD : I<0, Pseudo, (outs), (ins), "# CATCHPAD", [(catchpad)]>;
+
+// This instruction is responsible for re-establishing stack pointers after an
+// exception has been caught and we are rejoining normal control flow in the
+// parent function or funclet. It generally sets ESP and EBP, and optionally
+// ESI. It is only needed for 32-bit WinEH, as the runtime restores CSRs for us
+// elsewhere.
+let hasSideEffects = 1, hasCtrlDep = 1, isCodeGenOnly = 1 in
+def EH_RESTORE : I<0, Pseudo, (outs), (ins), "# EH_RESTORE", []>;
+
let hasSideEffects = 1, isBarrier = 1, isCodeGenOnly = 1,
usesCustomInserter = 1 in {
def EH_SjLj_SetJmp32 : I<0, Pseudo, (outs GR32:$dst), (ins i32mem:$buf),
"#SEH_PushFrame $mode", []>;
def SEH_EndPrologue : I<0, Pseudo, (outs), (ins),
"#SEH_EndPrologue", []>;
+ def SEH_Epilogue : I<0, Pseudo, (outs), (ins),
+ "#SEH_Epilogue", []>;
}
//===----------------------------------------------------------------------===//
let AddedComplexity = 20;
}
+let Predicates = [OptForSize, NotSlowIncDec, Not64BitMode],
+ AddedComplexity = 1 in {
+ // Pseudo instructions for materializing 1 and -1 using XOR+INC/DEC,
+ // which only require 3 bytes compared to MOV32ri which requires 5.
+ let Defs = [EFLAGS], isReMaterializable = 1, isPseudo = 1 in {
+ def MOV32r1 : I<0, Pseudo, (outs GR32:$dst), (ins), "",
+ [(set GR32:$dst, 1)]>;
+ def MOV32r_1 : I<0, Pseudo, (outs GR32:$dst), (ins), "",
+ [(set GR32:$dst, -1)]>;
+ }
+
+ // MOV16ri is 4 bytes, so the instructions above are smaller.
+ def : Pat<(i16 1), (EXTRACT_SUBREG (MOV32r1), sub_16bit)>;
+ def : Pat<(i16 -1), (EXTRACT_SUBREG (MOV32r_1), sub_16bit)>;
+}
+
// Materialize i64 constant where top 32-bits are zero. This could theoretically
// use MOV32ri with a SUBREG_TO_REG to represent the zero-extension, however
// that would make it more difficult to rematerialize.
-let AddedComplexity = 1, isReMaterializable = 1, isAsCheapAsAMove = 1,
- isCodeGenOnly = 1, neverHasSideEffects = 1 in
-def MOV32ri64 : Ii32<0xb8, AddRegFrm, (outs GR32:$dst), (ins i64i32imm:$src),
- "", [], IIC_ALU_NONMEM>, Sched<[WriteALU]>;
+let isReMaterializable = 1, isAsCheapAsAMove = 1,
+ isPseudo = 1, hasSideEffects = 0 in
+def MOV32ri64 : I<0, Pseudo, (outs GR32:$dst), (ins i64i32imm:$src), "", []>;
// This 64-bit pseudo-move can be used for both a 64-bit constant that is
-// actually the zero-extension of a 32-bit constant, and for labels in the
+// actually the zero-extension of a 32-bit constant and for labels in the
// x86-64 small code model.
-def mov64imm32 : ComplexPattern<i64, 1, "SelectMOV64Imm32", [imm, X86Wrapper]>;
+def mov64imm32 : ComplexPattern<i64, 1, "selectMOV64Imm32", [imm, X86Wrapper]>;
let AddedComplexity = 1 in
def : Pat<(i64 mov64imm32:$src),
// All calls clobber the non-callee saved registers. ESP is marked as
// a use to prevent stack-pointer assignments that appear immediately
// before calls from potentially appearing dead.
-let Defs = [EAX, ECX, EDX, FP0, FP1, FP2, FP3, FP4, FP5, FP6, ST0,
+let Defs = [EAX, ECX, EDX, FP0, FP1, FP2, FP3, FP4, FP5, FP6, FP7,
+ ST0, ST1, ST2, ST3, ST4, ST5, ST6, ST7,
MM0, MM1, MM2, MM3, MM4, MM5, MM6, MM7,
XMM0, XMM1, XMM2, XMM3, XMM4, XMM5, XMM6, XMM7,
XMM8, XMM9, XMM10, XMM11, XMM12, XMM13, XMM14, XMM15, EFLAGS],
- Uses = [ESP] in {
+ usesCustomInserter = 1, Uses = [ESP] in {
def TLS_addr32 : I<0, Pseudo, (outs), (ins i32mem:$sym),
"# TLS_addr32",
[(X86tlsaddr tls32addr:$sym)]>,
// a use to prevent stack-pointer assignments that appear immediately
// before calls from potentially appearing dead.
let Defs = [RAX, RCX, RDX, RSI, RDI, R8, R9, R10, R11,
- FP0, FP1, FP2, FP3, FP4, FP5, FP6, ST0, ST1,
+ FP0, FP1, FP2, FP3, FP4, FP5, FP6, FP7,
+ ST0, ST1, ST2, ST3, ST4, ST5, ST6, ST7,
MM0, MM1, MM2, MM3, MM4, MM5, MM6, MM7,
XMM0, XMM1, XMM2, XMM3, XMM4, XMM5, XMM6, XMM7,
XMM8, XMM9, XMM10, XMM11, XMM12, XMM13, XMM14, XMM15, EFLAGS],
- Uses = [RSP] in {
+ usesCustomInserter = 1, Uses = [RSP] in {
def TLS_addr64 : I<0, Pseudo, (outs), (ins i64mem:$sym),
"# TLS_addr64",
[(X86tlsaddr tls64addr:$sym)]>,
//===----------------------------------------------------------------------===//
// Conditional Move Pseudo Instructions
-// X86 doesn't have 8-bit conditional moves. Use a customInserter to
-// emit control flow. An alternative to this is to mark i8 SELECT as Promote,
-// however that requires promoting the operands, and can induce additional
-// i8 register pressure.
-let usesCustomInserter = 1, Uses = [EFLAGS] in {
-def CMOV_GR8 : I<0, Pseudo,
- (outs GR8:$dst), (ins GR8:$src1, GR8:$src2, i8imm:$cond),
- "#CMOV_GR8 PSEUDO!",
- [(set GR8:$dst, (X86cmov GR8:$src1, GR8:$src2,
- imm:$cond, EFLAGS))]>;
-
-let Predicates = [NoCMov] in {
-def CMOV_GR32 : I<0, Pseudo,
- (outs GR32:$dst), (ins GR32:$src1, GR32:$src2, i8imm:$cond),
- "#CMOV_GR32* PSEUDO!",
- [(set GR32:$dst,
- (X86cmov GR32:$src1, GR32:$src2, imm:$cond, EFLAGS))]>;
-def CMOV_GR16 : I<0, Pseudo,
- (outs GR16:$dst), (ins GR16:$src1, GR16:$src2, i8imm:$cond),
- "#CMOV_GR16* PSEUDO!",
- [(set GR16:$dst,
- (X86cmov GR16:$src1, GR16:$src2, imm:$cond, EFLAGS))]>;
-} // Predicates = [NoCMov]
-
-// fcmov doesn't handle all possible EFLAGS, provide a fallback if there is no
-// SSE1.
-let Predicates = [FPStackf32] in
-def CMOV_RFP32 : I<0, Pseudo,
- (outs RFP32:$dst),
- (ins RFP32:$src1, RFP32:$src2, i8imm:$cond),
- "#CMOV_RFP32 PSEUDO!",
- [(set RFP32:$dst,
- (X86cmov RFP32:$src1, RFP32:$src2, imm:$cond,
- EFLAGS))]>;
-// fcmov doesn't handle all possible EFLAGS, provide a fallback if there is no
-// SSE2.
-let Predicates = [FPStackf64] in
-def CMOV_RFP64 : I<0, Pseudo,
- (outs RFP64:$dst),
- (ins RFP64:$src1, RFP64:$src2, i8imm:$cond),
- "#CMOV_RFP64 PSEUDO!",
- [(set RFP64:$dst,
- (X86cmov RFP64:$src1, RFP64:$src2, imm:$cond,
- EFLAGS))]>;
-def CMOV_RFP80 : I<0, Pseudo,
- (outs RFP80:$dst),
- (ins RFP80:$src1, RFP80:$src2, i8imm:$cond),
- "#CMOV_RFP80 PSEUDO!",
- [(set RFP80:$dst,
- (X86cmov RFP80:$src1, RFP80:$src2, imm:$cond,
- EFLAGS))]>;
-} // UsesCustomInserter = 1, Uses = [EFLAGS]
-
-
-//===----------------------------------------------------------------------===//
-// Atomic Instruction Pseudo Instructions
-//===----------------------------------------------------------------------===//
-
-// Pseudo atomic instructions
-
-multiclass PSEUDO_ATOMIC_LOAD_BINOP<string mnemonic> {
- let usesCustomInserter = 1, mayLoad = 1, mayStore = 1 in {
- let Defs = [EFLAGS, AL] in
- def NAME#8 : I<0, Pseudo, (outs GR8:$dst),
- (ins i8mem:$ptr, GR8:$val),
- !strconcat(mnemonic, "8 PSEUDO!"), []>;
- let Defs = [EFLAGS, AX] in
- def NAME#16 : I<0, Pseudo,(outs GR16:$dst),
- (ins i16mem:$ptr, GR16:$val),
- !strconcat(mnemonic, "16 PSEUDO!"), []>;
- let Defs = [EFLAGS, EAX] in
- def NAME#32 : I<0, Pseudo, (outs GR32:$dst),
- (ins i32mem:$ptr, GR32:$val),
- !strconcat(mnemonic, "32 PSEUDO!"), []>;
- let Defs = [EFLAGS, RAX] in
- def NAME#64 : I<0, Pseudo, (outs GR64:$dst),
- (ins i64mem:$ptr, GR64:$val),
- !strconcat(mnemonic, "64 PSEUDO!"), []>;
- }
-}
-
-multiclass PSEUDO_ATOMIC_LOAD_BINOP_PATS<string name, string frag> {
- def : Pat<(!cast<PatFrag>(frag # "_8") addr:$ptr, GR8:$val),
- (!cast<Instruction>(name # "8") addr:$ptr, GR8:$val)>;
- def : Pat<(!cast<PatFrag>(frag # "_16") addr:$ptr, GR16:$val),
- (!cast<Instruction>(name # "16") addr:$ptr, GR16:$val)>;
- def : Pat<(!cast<PatFrag>(frag # "_32") addr:$ptr, GR32:$val),
- (!cast<Instruction>(name # "32") addr:$ptr, GR32:$val)>;
- def : Pat<(!cast<PatFrag>(frag # "_64") addr:$ptr, GR64:$val),
- (!cast<Instruction>(name # "64") addr:$ptr, GR64:$val)>;
-}
-
-// Atomic exchange, and, or, xor
-defm ATOMAND : PSEUDO_ATOMIC_LOAD_BINOP<"#ATOMAND">;
-defm ATOMOR : PSEUDO_ATOMIC_LOAD_BINOP<"#ATOMOR">;
-defm ATOMXOR : PSEUDO_ATOMIC_LOAD_BINOP<"#ATOMXOR">;
-defm ATOMNAND : PSEUDO_ATOMIC_LOAD_BINOP<"#ATOMNAND">;
-defm ATOMMAX : PSEUDO_ATOMIC_LOAD_BINOP<"#ATOMMAX">;
-defm ATOMMIN : PSEUDO_ATOMIC_LOAD_BINOP<"#ATOMMIN">;
-defm ATOMUMAX : PSEUDO_ATOMIC_LOAD_BINOP<"#ATOMUMAX">;
-defm ATOMUMIN : PSEUDO_ATOMIC_LOAD_BINOP<"#ATOMUMIN">;
-
-defm : PSEUDO_ATOMIC_LOAD_BINOP_PATS<"ATOMAND", "atomic_load_and">;
-defm : PSEUDO_ATOMIC_LOAD_BINOP_PATS<"ATOMOR", "atomic_load_or">;
-defm : PSEUDO_ATOMIC_LOAD_BINOP_PATS<"ATOMXOR", "atomic_load_xor">;
-defm : PSEUDO_ATOMIC_LOAD_BINOP_PATS<"ATOMNAND", "atomic_load_nand">;
-defm : PSEUDO_ATOMIC_LOAD_BINOP_PATS<"ATOMMAX", "atomic_load_max">;
-defm : PSEUDO_ATOMIC_LOAD_BINOP_PATS<"ATOMMIN", "atomic_load_min">;
-defm : PSEUDO_ATOMIC_LOAD_BINOP_PATS<"ATOMUMAX", "atomic_load_umax">;
-defm : PSEUDO_ATOMIC_LOAD_BINOP_PATS<"ATOMUMIN", "atomic_load_umin">;
-
-multiclass PSEUDO_ATOMIC_LOAD_BINOP6432<string mnemonic> {
- let usesCustomInserter = 1, Defs = [EFLAGS, EAX, EDX],
- mayLoad = 1, mayStore = 1, hasSideEffects = 0 in
- def NAME#6432 : I<0, Pseudo, (outs GR32:$dst1, GR32:$dst2),
- (ins i64mem:$ptr, GR32:$val1, GR32:$val2),
- !strconcat(mnemonic, "6432 PSEUDO!"), []>;
+// CMOV* - Used to implement the SELECT DAG operation. Expanded after
+// instruction selection into a branch sequence.
+multiclass CMOVrr_PSEUDO<RegisterClass RC, ValueType VT> {
+ def CMOV#NAME : I<0, Pseudo,
+ (outs RC:$dst), (ins RC:$t, RC:$f, i8imm:$cond),
+ "#CMOV_"#NAME#" PSEUDO!",
+ [(set RC:$dst, (VT (X86cmov RC:$t, RC:$f, imm:$cond,
+ EFLAGS)))]>;
}
-defm ATOMAND : PSEUDO_ATOMIC_LOAD_BINOP6432<"#ATOMAND">;
-defm ATOMOR : PSEUDO_ATOMIC_LOAD_BINOP6432<"#ATOMOR">;
-defm ATOMXOR : PSEUDO_ATOMIC_LOAD_BINOP6432<"#ATOMXOR">;
-defm ATOMNAND : PSEUDO_ATOMIC_LOAD_BINOP6432<"#ATOMNAND">;
-defm ATOMADD : PSEUDO_ATOMIC_LOAD_BINOP6432<"#ATOMADD">;
-defm ATOMSUB : PSEUDO_ATOMIC_LOAD_BINOP6432<"#ATOMSUB">;
-defm ATOMMAX : PSEUDO_ATOMIC_LOAD_BINOP6432<"#ATOMMAX">;
-defm ATOMMIN : PSEUDO_ATOMIC_LOAD_BINOP6432<"#ATOMMIN">;
-defm ATOMUMAX : PSEUDO_ATOMIC_LOAD_BINOP6432<"#ATOMUMAX">;
-defm ATOMUMIN : PSEUDO_ATOMIC_LOAD_BINOP6432<"#ATOMUMIN">;
-defm ATOMSWAP : PSEUDO_ATOMIC_LOAD_BINOP6432<"#ATOMSWAP">;
+let usesCustomInserter = 1, Uses = [EFLAGS] in {
+ // X86 doesn't have 8-bit conditional moves. Use a customInserter to
+ // emit control flow. An alternative to this is to mark i8 SELECT as Promote,
+ // however that requires promoting the operands, and can induce additional
+ // i8 register pressure.
+ defm _GR8 : CMOVrr_PSEUDO<GR8, i8>;
+
+ let Predicates = [NoCMov] in {
+ defm _GR32 : CMOVrr_PSEUDO<GR32, i32>;
+ defm _GR16 : CMOVrr_PSEUDO<GR16, i16>;
+ } // Predicates = [NoCMov]
+
+ // fcmov doesn't handle all possible EFLAGS, provide a fallback if there is no
+ // SSE1/SSE2.
+ let Predicates = [FPStackf32] in
+ defm _RFP32 : CMOVrr_PSEUDO<RFP32, f32>;
+
+ let Predicates = [FPStackf64] in
+ defm _RFP64 : CMOVrr_PSEUDO<RFP64, f64>;
+
+ defm _RFP80 : CMOVrr_PSEUDO<RFP80, f80>;
+
+ defm _FR32 : CMOVrr_PSEUDO<FR32, f32>;
+ defm _FR64 : CMOVrr_PSEUDO<FR64, f64>;
+ defm _FR128 : CMOVrr_PSEUDO<FR128, f128>;
+ defm _V4F32 : CMOVrr_PSEUDO<VR128, v4f32>;
+ defm _V2F64 : CMOVrr_PSEUDO<VR128, v2f64>;
+ defm _V2I64 : CMOVrr_PSEUDO<VR128, v2i64>;
+ defm _V8F32 : CMOVrr_PSEUDO<VR256, v8f32>;
+ defm _V4F64 : CMOVrr_PSEUDO<VR256, v4f64>;
+ defm _V4I64 : CMOVrr_PSEUDO<VR256, v4i64>;
+ defm _V8I64 : CMOVrr_PSEUDO<VR512, v8i64>;
+ defm _V8F64 : CMOVrr_PSEUDO<VR512, v8f64>;
+ defm _V16F32 : CMOVrr_PSEUDO<VR512, v16f32>;
+ defm _V8I1 : CMOVrr_PSEUDO<VK8, v8i1>;
+ defm _V16I1 : CMOVrr_PSEUDO<VK16, v16i1>;
+ defm _V32I1 : CMOVrr_PSEUDO<VK32, v32i1>;
+ defm _V64I1 : CMOVrr_PSEUDO<VK64, v64i1>;
+} // usesCustomInserter = 1, Uses = [EFLAGS]
//===----------------------------------------------------------------------===//
// Normal-Instructions-With-Lock-Prefix Pseudo Instructions
// TODO: Get this to fold the constant into the instruction.
let isCodeGenOnly = 1, Defs = [EFLAGS] in
def OR32mrLocked : I<0x09, MRMDestMem, (outs), (ins i32mem:$dst, GR32:$zero),
- "or{l}\t{$zero, $dst|$dst, $zero}",
- [], IIC_ALU_MEM>, Requires<[Not64BitMode]>, LOCK,
+ "or{l}\t{$zero, $dst|$dst, $zero}", [],
+ IIC_ALU_MEM>, Requires<[Not64BitMode]>, OpSize32, LOCK,
Sched<[WriteALULd, WriteRMW]>;
let hasSideEffects = 1 in
"{$src2, $dst|$dst, $src2}"),
[], IIC_ALU_MEM>, OpSize32, LOCK;
-def NAME#64mi32 : RIi32<{ImmOpc{7}, ImmOpc{6}, ImmOpc{5}, ImmOpc{4},
- ImmOpc{3}, ImmOpc{2}, ImmOpc{1}, 1 },
- ImmMod, (outs), (ins i64mem :$dst, i64i32imm :$src2),
- !strconcat(mnemonic, "{q}\t",
- "{$src2, $dst|$dst, $src2}"),
- [], IIC_ALU_MEM>, LOCK;
+def NAME#64mi32 : RIi32S<{ImmOpc{7}, ImmOpc{6}, ImmOpc{5}, ImmOpc{4},
+ ImmOpc{3}, ImmOpc{2}, ImmOpc{1}, 1 },
+ ImmMod, (outs), (ins i64mem :$dst, i64i32imm :$src2),
+ !strconcat(mnemonic, "{q}\t",
+ "{$src2, $dst|$dst, $src2}"),
+ [], IIC_ALU_MEM>, LOCK;
def NAME#16mi8 : Ii8<{ImmOpc8{7}, ImmOpc8{6}, ImmOpc8{5}, ImmOpc8{4},
ImmOpc8{3}, ImmOpc8{2}, ImmOpc8{1}, 1 },
IIC_XADD_LOCK_MEM8, IIC_XADD_LOCK_MEM>,
TB, LOCK;
-def ACQUIRE_MOV8rm : I<0, Pseudo, (outs GR8 :$dst), (ins i8mem :$src),
- "#ACQUIRE_MOV PSEUDO!",
- [(set GR8:$dst, (atomic_load_8 addr:$src))]>;
-def ACQUIRE_MOV16rm : I<0, Pseudo, (outs GR16:$dst), (ins i16mem:$src),
- "#ACQUIRE_MOV PSEUDO!",
- [(set GR16:$dst, (atomic_load_16 addr:$src))]>;
-def ACQUIRE_MOV32rm : I<0, Pseudo, (outs GR32:$dst), (ins i32mem:$src),
- "#ACQUIRE_MOV PSEUDO!",
- [(set GR32:$dst, (atomic_load_32 addr:$src))]>;
-def ACQUIRE_MOV64rm : I<0, Pseudo, (outs GR64:$dst), (ins i64mem:$src),
- "#ACQUIRE_MOV PSEUDO!",
- [(set GR64:$dst, (atomic_load_64 addr:$src))]>;
+/* The following multiclass tries to make sure that in code like
+ * x.store (immediate op x.load(acquire), release)
+ * and
+ * x.store (register op x.load(acquire), release)
+ * an operation directly on memory is generated instead of wasting a register.
+ * It is not automatic as atomic_store/load are only lowered to MOV instructions
+ * extremely late to prevent them from being accidentally reordered in the backend
+ * (see below the RELEASE_MOV* / ACQUIRE_MOV* pseudo-instructions)
+ */
+multiclass RELEASE_BINOP_MI<SDNode op> {
+ def NAME#8mi : I<0, Pseudo, (outs), (ins i8mem:$dst, i8imm:$src),
+ "#BINOP "#NAME#"8mi PSEUDO!",
+ [(atomic_store_8 addr:$dst, (op
+ (atomic_load_8 addr:$dst), (i8 imm:$src)))]>;
+ def NAME#8mr : I<0, Pseudo, (outs), (ins i8mem:$dst, GR8:$src),
+ "#BINOP "#NAME#"8mr PSEUDO!",
+ [(atomic_store_8 addr:$dst, (op
+ (atomic_load_8 addr:$dst), GR8:$src))]>;
+ // NAME#16 is not generated as 16-bit arithmetic instructions are considered
+ // costly and avoided as far as possible by this backend anyway
+ def NAME#32mi : I<0, Pseudo, (outs), (ins i32mem:$dst, i32imm:$src),
+ "#BINOP "#NAME#"32mi PSEUDO!",
+ [(atomic_store_32 addr:$dst, (op
+ (atomic_load_32 addr:$dst), (i32 imm:$src)))]>;
+ def NAME#32mr : I<0, Pseudo, (outs), (ins i32mem:$dst, GR32:$src),
+ "#BINOP "#NAME#"32mr PSEUDO!",
+ [(atomic_store_32 addr:$dst, (op
+ (atomic_load_32 addr:$dst), GR32:$src))]>;
+ def NAME#64mi32 : I<0, Pseudo, (outs), (ins i64mem:$dst, i64i32imm:$src),
+ "#BINOP "#NAME#"64mi32 PSEUDO!",
+ [(atomic_store_64 addr:$dst, (op
+ (atomic_load_64 addr:$dst), (i64immSExt32:$src)))]>;
+ def NAME#64mr : I<0, Pseudo, (outs), (ins i64mem:$dst, GR64:$src),
+ "#BINOP "#NAME#"64mr PSEUDO!",
+ [(atomic_store_64 addr:$dst, (op
+ (atomic_load_64 addr:$dst), GR64:$src))]>;
+}
+let Defs = [EFLAGS] in {
+ defm RELEASE_ADD : RELEASE_BINOP_MI<add>;
+ defm RELEASE_AND : RELEASE_BINOP_MI<and>;
+ defm RELEASE_OR : RELEASE_BINOP_MI<or>;
+ defm RELEASE_XOR : RELEASE_BINOP_MI<xor>;
+ // Note: we don't deal with sub, because substractions of constants are
+ // optimized into additions before this code can run.
+}
+
+// Same as above, but for floating-point.
+// FIXME: imm version.
+// FIXME: Version that doesn't clobber $src, using AVX's VADDSS.
+// FIXME: This could also handle SIMD operations with *ps and *pd instructions.
+let usesCustomInserter = 1 in {
+multiclass RELEASE_FP_BINOP_MI<SDNode op> {
+ def NAME#32mr : I<0, Pseudo, (outs), (ins i32mem:$dst, FR32:$src),
+ "#BINOP "#NAME#"32mr PSEUDO!",
+ [(atomic_store_32 addr:$dst,
+ (i32 (bitconvert (op
+ (f32 (bitconvert (i32 (atomic_load_32 addr:$dst)))),
+ FR32:$src))))]>, Requires<[HasSSE1]>;
+ def NAME#64mr : I<0, Pseudo, (outs), (ins i64mem:$dst, FR64:$src),
+ "#BINOP "#NAME#"64mr PSEUDO!",
+ [(atomic_store_64 addr:$dst,
+ (i64 (bitconvert (op
+ (f64 (bitconvert (i64 (atomic_load_64 addr:$dst)))),
+ FR64:$src))))]>, Requires<[HasSSE2]>;
+}
+defm RELEASE_FADD : RELEASE_FP_BINOP_MI<fadd>;
+// FIXME: Add fsub, fmul, fdiv, ...
+}
+
+multiclass RELEASE_UNOP<dag dag8, dag dag16, dag dag32, dag dag64> {
+ def NAME#8m : I<0, Pseudo, (outs), (ins i8mem:$dst),
+ "#UNOP "#NAME#"8m PSEUDO!",
+ [(atomic_store_8 addr:$dst, dag8)]>;
+ def NAME#16m : I<0, Pseudo, (outs), (ins i16mem:$dst),
+ "#UNOP "#NAME#"16m PSEUDO!",
+ [(atomic_store_16 addr:$dst, dag16)]>;
+ def NAME#32m : I<0, Pseudo, (outs), (ins i32mem:$dst),
+ "#UNOP "#NAME#"32m PSEUDO!",
+ [(atomic_store_32 addr:$dst, dag32)]>;
+ def NAME#64m : I<0, Pseudo, (outs), (ins i64mem:$dst),
+ "#UNOP "#NAME#"64m PSEUDO!",
+ [(atomic_store_64 addr:$dst, dag64)]>;
+}
+
+let Defs = [EFLAGS] in {
+ defm RELEASE_INC : RELEASE_UNOP<
+ (add (atomic_load_8 addr:$dst), (i8 1)),
+ (add (atomic_load_16 addr:$dst), (i16 1)),
+ (add (atomic_load_32 addr:$dst), (i32 1)),
+ (add (atomic_load_64 addr:$dst), (i64 1))>, Requires<[NotSlowIncDec]>;
+ defm RELEASE_DEC : RELEASE_UNOP<
+ (add (atomic_load_8 addr:$dst), (i8 -1)),
+ (add (atomic_load_16 addr:$dst), (i16 -1)),
+ (add (atomic_load_32 addr:$dst), (i32 -1)),
+ (add (atomic_load_64 addr:$dst), (i64 -1))>, Requires<[NotSlowIncDec]>;
+}
+/*
+TODO: These don't work because the type inference of TableGen fails.
+TODO: find a way to fix it.
+let Defs = [EFLAGS] in {
+ defm RELEASE_NEG : RELEASE_UNOP<
+ (ineg (atomic_load_8 addr:$dst)),
+ (ineg (atomic_load_16 addr:$dst)),
+ (ineg (atomic_load_32 addr:$dst)),
+ (ineg (atomic_load_64 addr:$dst))>;
+}
+// NOT doesn't set flags.
+defm RELEASE_NOT : RELEASE_UNOP<
+ (not (atomic_load_8 addr:$dst)),
+ (not (atomic_load_16 addr:$dst)),
+ (not (atomic_load_32 addr:$dst)),
+ (not (atomic_load_64 addr:$dst))>;
+*/
+
+def RELEASE_MOV8mi : I<0, Pseudo, (outs), (ins i8mem:$dst, i8imm:$src),
+ "#RELEASE_MOV8mi PSEUDO!",
+ [(atomic_store_8 addr:$dst, (i8 imm:$src))]>;
+def RELEASE_MOV16mi : I<0, Pseudo, (outs), (ins i16mem:$dst, i16imm:$src),
+ "#RELEASE_MOV16mi PSEUDO!",
+ [(atomic_store_16 addr:$dst, (i16 imm:$src))]>;
+def RELEASE_MOV32mi : I<0, Pseudo, (outs), (ins i32mem:$dst, i32imm:$src),
+ "#RELEASE_MOV32mi PSEUDO!",
+ [(atomic_store_32 addr:$dst, (i32 imm:$src))]>;
+def RELEASE_MOV64mi32 : I<0, Pseudo, (outs), (ins i64mem:$dst, i64i32imm:$src),
+ "#RELEASE_MOV64mi32 PSEUDO!",
+ [(atomic_store_64 addr:$dst, i64immSExt32:$src)]>;
def RELEASE_MOV8mr : I<0, Pseudo, (outs), (ins i8mem :$dst, GR8 :$src),
- "#RELEASE_MOV PSEUDO!",
+ "#RELEASE_MOV8mr PSEUDO!",
[(atomic_store_8 addr:$dst, GR8 :$src)]>;
def RELEASE_MOV16mr : I<0, Pseudo, (outs), (ins i16mem:$dst, GR16:$src),
- "#RELEASE_MOV PSEUDO!",
+ "#RELEASE_MOV16mr PSEUDO!",
[(atomic_store_16 addr:$dst, GR16:$src)]>;
def RELEASE_MOV32mr : I<0, Pseudo, (outs), (ins i32mem:$dst, GR32:$src),
- "#RELEASE_MOV PSEUDO!",
+ "#RELEASE_MOV32mr PSEUDO!",
[(atomic_store_32 addr:$dst, GR32:$src)]>;
def RELEASE_MOV64mr : I<0, Pseudo, (outs), (ins i64mem:$dst, GR64:$src),
- "#RELEASE_MOV PSEUDO!",
+ "#RELEASE_MOV64mr PSEUDO!",
[(atomic_store_64 addr:$dst, GR64:$src)]>;
-//===----------------------------------------------------------------------===//
-// Conditional Move Pseudo Instructions.
-//===----------------------------------------------------------------------===//
-
-
-// CMOV* - Used to implement the SSE SELECT DAG operation. Expanded after
-// instruction selection into a branch sequence.
-let Uses = [EFLAGS], usesCustomInserter = 1 in {
- def CMOV_FR32 : I<0, Pseudo,
- (outs FR32:$dst), (ins FR32:$t, FR32:$f, i8imm:$cond),
- "#CMOV_FR32 PSEUDO!",
- [(set FR32:$dst, (X86cmov FR32:$t, FR32:$f, imm:$cond,
- EFLAGS))]>;
- def CMOV_FR64 : I<0, Pseudo,
- (outs FR64:$dst), (ins FR64:$t, FR64:$f, i8imm:$cond),
- "#CMOV_FR64 PSEUDO!",
- [(set FR64:$dst, (X86cmov FR64:$t, FR64:$f, imm:$cond,
- EFLAGS))]>;
- def CMOV_V4F32 : I<0, Pseudo,
- (outs VR128:$dst), (ins VR128:$t, VR128:$f, i8imm:$cond),
- "#CMOV_V4F32 PSEUDO!",
- [(set VR128:$dst,
- (v4f32 (X86cmov VR128:$t, VR128:$f, imm:$cond,
- EFLAGS)))]>;
- def CMOV_V2F64 : I<0, Pseudo,
- (outs VR128:$dst), (ins VR128:$t, VR128:$f, i8imm:$cond),
- "#CMOV_V2F64 PSEUDO!",
- [(set VR128:$dst,
- (v2f64 (X86cmov VR128:$t, VR128:$f, imm:$cond,
- EFLAGS)))]>;
- def CMOV_V2I64 : I<0, Pseudo,
- (outs VR128:$dst), (ins VR128:$t, VR128:$f, i8imm:$cond),
- "#CMOV_V2I64 PSEUDO!",
- [(set VR128:$dst,
- (v2i64 (X86cmov VR128:$t, VR128:$f, imm:$cond,
- EFLAGS)))]>;
- def CMOV_V8F32 : I<0, Pseudo,
- (outs VR256:$dst), (ins VR256:$t, VR256:$f, i8imm:$cond),
- "#CMOV_V8F32 PSEUDO!",
- [(set VR256:$dst,
- (v8f32 (X86cmov VR256:$t, VR256:$f, imm:$cond,
- EFLAGS)))]>;
- def CMOV_V4F64 : I<0, Pseudo,
- (outs VR256:$dst), (ins VR256:$t, VR256:$f, i8imm:$cond),
- "#CMOV_V4F64 PSEUDO!",
- [(set VR256:$dst,
- (v4f64 (X86cmov VR256:$t, VR256:$f, imm:$cond,
- EFLAGS)))]>;
- def CMOV_V4I64 : I<0, Pseudo,
- (outs VR256:$dst), (ins VR256:$t, VR256:$f, i8imm:$cond),
- "#CMOV_V4I64 PSEUDO!",
- [(set VR256:$dst,
- (v4i64 (X86cmov VR256:$t, VR256:$f, imm:$cond,
- EFLAGS)))]>;
- def CMOV_V8I64 : I<0, Pseudo,
- (outs VR512:$dst), (ins VR512:$t, VR512:$f, i8imm:$cond),
- "#CMOV_V8I64 PSEUDO!",
- [(set VR512:$dst,
- (v8i64 (X86cmov VR512:$t, VR512:$f, imm:$cond,
- EFLAGS)))]>;
- def CMOV_V8F64 : I<0, Pseudo,
- (outs VR512:$dst), (ins VR512:$t, VR512:$f, i8imm:$cond),
- "#CMOV_V8F64 PSEUDO!",
- [(set VR512:$dst,
- (v8f64 (X86cmov VR512:$t, VR512:$f, imm:$cond,
- EFLAGS)))]>;
- def CMOV_V16F32 : I<0, Pseudo,
- (outs VR512:$dst), (ins VR512:$t, VR512:$f, i8imm:$cond),
- "#CMOV_V16F32 PSEUDO!",
- [(set VR512:$dst,
- (v16f32 (X86cmov VR512:$t, VR512:$f, imm:$cond,
- EFLAGS)))]>;
-}
-
+def ACQUIRE_MOV8rm : I<0, Pseudo, (outs GR8 :$dst), (ins i8mem :$src),
+ "#ACQUIRE_MOV8rm PSEUDO!",
+ [(set GR8:$dst, (atomic_load_8 addr:$src))]>;
+def ACQUIRE_MOV16rm : I<0, Pseudo, (outs GR16:$dst), (ins i16mem:$src),
+ "#ACQUIRE_MOV16rm PSEUDO!",
+ [(set GR16:$dst, (atomic_load_16 addr:$src))]>;
+def ACQUIRE_MOV32rm : I<0, Pseudo, (outs GR32:$dst), (ins i32mem:$src),
+ "#ACQUIRE_MOV32rm PSEUDO!",
+ [(set GR32:$dst, (atomic_load_32 addr:$src))]>;
+def ACQUIRE_MOV64rm : I<0, Pseudo, (outs GR64:$dst), (ins i64mem:$src),
+ "#ACQUIRE_MOV64rm PSEUDO!",
+ [(set GR64:$dst, (atomic_load_64 addr:$src))]>;
//===----------------------------------------------------------------------===//
// DAG Pattern Matching Rules
def : Pat<(i32 (X86Wrapper tglobaltlsaddr:$dst)),(MOV32ri tglobaltlsaddr:$dst)>;
def : Pat<(i32 (X86Wrapper tglobaladdr :$dst)), (MOV32ri tglobaladdr :$dst)>;
def : Pat<(i32 (X86Wrapper texternalsym:$dst)), (MOV32ri texternalsym:$dst)>;
+def : Pat<(i32 (X86Wrapper mcsym:$dst)), (MOV32ri mcsym:$dst)>;
def : Pat<(i32 (X86Wrapper tblockaddress:$dst)), (MOV32ri tblockaddress:$dst)>;
def : Pat<(add GR32:$src1, (X86Wrapper tconstpool:$src2)),
(ADD32ri GR32:$src1, tglobaladdr:$src2)>;
def : Pat<(add GR32:$src1, (X86Wrapper texternalsym:$src2)),
(ADD32ri GR32:$src1, texternalsym:$src2)>;
+def : Pat<(add GR32:$src1, (X86Wrapper mcsym:$src2)),
+ (ADD32ri GR32:$src1, mcsym:$src2)>;
def : Pat<(add GR32:$src1, (X86Wrapper tblockaddress:$src2)),
(ADD32ri GR32:$src1, tblockaddress:$src2)>;
(MOV32mi addr:$dst, tglobaladdr:$src)>;
def : Pat<(store (i32 (X86Wrapper texternalsym:$src)), addr:$dst),
(MOV32mi addr:$dst, texternalsym:$src)>;
+def : Pat<(store (i32 (X86Wrapper mcsym:$src)), addr:$dst),
+ (MOV32mi addr:$dst, mcsym:$src)>;
def : Pat<(store (i32 (X86Wrapper tblockaddress:$src)), addr:$dst),
(MOV32mi addr:$dst, tblockaddress:$src)>;
(MOV64ri tglobaladdr :$dst)>, Requires<[FarData]>;
def : Pat<(i64 (X86Wrapper texternalsym:$dst)),
(MOV64ri texternalsym:$dst)>, Requires<[FarData]>;
+def : Pat<(i64 (X86Wrapper mcsym:$dst)),
+ (MOV64ri mcsym:$dst)>, Requires<[FarData]>;
def : Pat<(i64 (X86Wrapper tblockaddress:$dst)),
(MOV64ri tblockaddress:$dst)>, Requires<[FarData]>;
(MOV64ri32 tglobaladdr :$dst)>, Requires<[KernelCode]>;
def : Pat<(i64 (X86Wrapper texternalsym:$dst)),
(MOV64ri32 texternalsym:$dst)>, Requires<[KernelCode]>;
+def : Pat<(i64 (X86Wrapper mcsym:$dst)),
+ (MOV64ri32 mcsym:$dst)>, Requires<[KernelCode]>;
def : Pat<(i64 (X86Wrapper tblockaddress:$dst)),
(MOV64ri32 tblockaddress:$dst)>, Requires<[KernelCode]>;
def : Pat<(store (i64 (X86Wrapper texternalsym:$src)), addr:$dst),
(MOV64mi32 addr:$dst, texternalsym:$src)>,
Requires<[NearData, IsStatic]>;
+def : Pat<(store (i64 (X86Wrapper mcsym:$src)), addr:$dst),
+ (MOV64mi32 addr:$dst, mcsym:$src)>,
+ Requires<[NearData, IsStatic]>;
def : Pat<(store (i64 (X86Wrapper tblockaddress:$src)), addr:$dst),
(MOV64mi32 addr:$dst, tblockaddress:$src)>,
Requires<[NearData, IsStatic]>;
+def : Pat<(i32 (X86RecoverFrameAlloc mcsym:$dst)), (MOV32ri mcsym:$dst)>;
+def : Pat<(i64 (X86RecoverFrameAlloc mcsym:$dst)), (MOV64ri mcsym:$dst)>;
+
// Calls
// tls has some funny stuff here...
Requires<[Not64BitMode, IsNotPIC]>;
def : Pat<(X86tcret (i32 tglobaladdr:$dst), imm:$off),
- (TCRETURNdi texternalsym:$dst, imm:$off)>,
- Requires<[Not64BitMode]>;
+ (TCRETURNdi tglobaladdr:$dst, imm:$off)>,
+ Requires<[NotLP64]>;
def : Pat<(X86tcret (i32 texternalsym:$dst), imm:$off),
(TCRETURNdi texternalsym:$dst, imm:$off)>,
- Requires<[Not64BitMode]>;
+ Requires<[NotLP64]>;
def : Pat<(X86tcret ptr_rc_tailcall:$dst, imm:$off),
(TCRETURNri64 ptr_rc_tailcall:$dst, imm:$off)>,
def : Pat<(X86tcret (i64 tglobaladdr:$dst), imm:$off),
(TCRETURNdi64 tglobaladdr:$dst, imm:$off)>,
- Requires<[In64BitMode]>;
+ Requires<[IsLP64]>;
def : Pat<(X86tcret (i64 texternalsym:$dst), imm:$off),
(TCRETURNdi64 texternalsym:$dst, imm:$off)>,
- Requires<[In64BitMode]>;
+ Requires<[IsLP64]>;
// Normal calls, with various flavors of addresses.
def : Pat<(X86call (i32 tglobaladdr:$dst)),
defm : CMOVmr<X86_COND_NO, CMOVO16rm , CMOVO32rm , CMOVO64rm>;
// zextload bool -> zextload byte
-def : Pat<(zextloadi8i1 addr:$src), (MOV8rm addr:$src)>;
-def : Pat<(zextloadi16i1 addr:$src), (MOVZX16rm8 addr:$src)>;
-def : Pat<(zextloadi32i1 addr:$src), (MOVZX32rm8 addr:$src)>;
+def : Pat<(zextloadi8i1 addr:$src), (AND8ri (MOV8rm addr:$src), (i8 1))>;
+def : Pat<(zextloadi16i1 addr:$src), (AND16ri8 (MOVZX16rm8 addr:$src), (i16 1))>;
+def : Pat<(zextloadi32i1 addr:$src), (AND32ri8 (MOVZX32rm8 addr:$src), (i32 1))>;
def : Pat<(zextloadi64i1 addr:$src),
- (SUBREG_TO_REG (i64 0), (MOVZX32rm8 addr:$src), sub_32bit)>;
+ (SUBREG_TO_REG (i64 0),
+ (AND32ri8 (MOVZX32rm8 addr:$src), (i32 1)), sub_32bit)>;
// extload bool -> extload byte
// When extloading from 16-bit and smaller memory locations into 64-bit
return N->getOpcode() != ISD::TRUNCATE &&
N->getOpcode() != TargetOpcode::EXTRACT_SUBREG &&
N->getOpcode() != ISD::CopyFromReg &&
+ N->getOpcode() != ISD::AssertSext &&
N->getOpcode() != X86ISD::CMOV;
}]>;
// with implicit zero-extension instead of a 64-bit and if the immediate has at
// least 32 bits of leading zeros. If in addition the last 32 bits can be
// represented with a sign extension of a 8 bit constant, use that.
+// This can also reduce instruction size by eliminating the need for the REX
+// prefix.
+// AddedComplexity is needed to give priority over i64immSExt8 and i64immSExt32.
+let AddedComplexity = 1 in {
def : Pat<(and GR64:$src, i64immZExt32SExt8:$imm),
(SUBREG_TO_REG
(i64 0),
(EXTRACT_SUBREG GR64:$src, sub_32bit),
(i32 (GetLo32XForm imm:$imm))),
sub_32bit)>;
+} // AddedComplexity = 1
+// AddedComplexity is needed due to the increased complexity on the
+// i64immZExt32SExt8 and i64immZExt32 patterns above. Applying this to all
+// the MOVZX patterns keeps thems together in DAGIsel tables.
+let AddedComplexity = 1 in {
// r & (2^16-1) ==> movz
def : Pat<(and GR32:$src1, 0xffff),
(MOVZX32rr16 (EXTRACT_SUBREG GR32:$src1, sub_16bit))>;
(EXTRACT_SUBREG (MOVZX32rr8 (i8
(EXTRACT_SUBREG GR16:$src1, sub_8bit))), sub_16bit)>,
Requires<[In64BitMode]>;
+} // AddedComplexity = 1
// sext_inreg patterns
def : Pat<(shl GR64:$src1, (i8 1)), (ADD64rr GR64:$src1, GR64:$src1)>;
// Helper imms that check if a mask doesn't change significant shift bits.
-def immShift32 : ImmLeaf<i8, [{ return CountTrailingOnes_32(Imm) >= 5; }]>;
-def immShift64 : ImmLeaf<i8, [{ return CountTrailingOnes_32(Imm) >= 6; }]>;
+def immShift32 : ImmLeaf<i8, [{
+ return countTrailingOnes<uint64_t>(Imm) >= 5;
+}]>;
+def immShift64 : ImmLeaf<i8, [{
+ return countTrailingOnes<uint64_t>(Imm) >= 6;
+}]>;
// Shift amount is implicitly masked.
multiclass MaskedShiftAmountPats<SDNode frag, string name> {
def : Pat<(mul (loadi64 addr:$src1), i64immSExt32:$src2),
(IMUL64rmi32 addr:$src1, i64immSExt32:$src2)>;
-// Increment reg.
-// Do not make INC if it is slow
-def : Pat<(add GR8:$src, 1),
- (INC8r GR8:$src)>, Requires<[NotSlowIncDec]>;
-def : Pat<(add GR16:$src, 1),
- (INC16r GR16:$src)>, Requires<[NotSlowIncDec, Not64BitMode]>;
-def : Pat<(add GR16:$src, 1),
- (INC64_16r GR16:$src)>, Requires<[NotSlowIncDec, In64BitMode]>;
-def : Pat<(add GR32:$src, 1),
- (INC32r GR32:$src)>, Requires<[NotSlowIncDec, Not64BitMode]>;
-def : Pat<(add GR32:$src, 1),
- (INC64_32r GR32:$src)>, Requires<[NotSlowIncDec, In64BitMode]>;
-def : Pat<(add GR64:$src, 1),
- (INC64r GR64:$src)>, Requires<[NotSlowIncDec]>;
-
-// Decrement reg.
-// Do not make DEC if it is slow
-def : Pat<(add GR8:$src, -1),
- (DEC8r GR8:$src)>, Requires<[NotSlowIncDec]>;
-def : Pat<(add GR16:$src, -1),
- (DEC16r GR16:$src)>, Requires<[NotSlowIncDec, Not64BitMode]>;
-def : Pat<(add GR16:$src, -1),
- (DEC64_16r GR16:$src)>, Requires<[NotSlowIncDec, In64BitMode]>;
-def : Pat<(add GR32:$src, -1),
- (DEC32r GR32:$src)>, Requires<[NotSlowIncDec, Not64BitMode]>;
-def : Pat<(add GR32:$src, -1),
- (DEC64_32r GR32:$src)>, Requires<[NotSlowIncDec, In64BitMode]>;
-def : Pat<(add GR64:$src, -1),
- (DEC64r GR64:$src)>, Requires<[NotSlowIncDec]>;
+// Increment/Decrement reg.
+// Do not make INC/DEC if it is slow
+let Predicates = [NotSlowIncDec] in {
+ def : Pat<(add GR8:$src, 1), (INC8r GR8:$src)>;
+ def : Pat<(add GR16:$src, 1), (INC16r GR16:$src)>;
+ def : Pat<(add GR32:$src, 1), (INC32r GR32:$src)>;
+ def : Pat<(add GR64:$src, 1), (INC64r GR64:$src)>;
+ def : Pat<(add GR8:$src, -1), (DEC8r GR8:$src)>;
+ def : Pat<(add GR16:$src, -1), (DEC16r GR16:$src)>;
+ def : Pat<(add GR32:$src, -1), (DEC32r GR32:$src)>;
+ def : Pat<(add GR64:$src, -1), (DEC64r GR64:$src)>;
+}
// or reg/reg.
def : Pat<(or GR8 :$src1, GR8 :$src2), (OR8rr GR8 :$src1, GR8 :$src2)>;
projects / oota-llvm.git / blobdiff