#include "X86Subtarget.h"
#include "X86TargetMachine.h"
#include "llvm/ADT/SmallSet.h"
+#include "llvm/Analysis/EHPersonalities.h"
#include "llvm/CodeGen/MachineFrameInfo.h"
#include "llvm/CodeGen/MachineFunction.h"
#include "llvm/CodeGen/MachineInstrBuilder.h"
/// to this register without worry about clobbering it.
static unsigned findDeadCallerSavedReg(MachineBasicBlock &MBB,
MachineBasicBlock::iterator &MBBI,
- const TargetRegisterInfo *TRI,
+ const X86RegisterInfo *TRI,
bool Is64Bit) {
const MachineFunction *MF = MBB.getParent();
const Function *F = MF->getFunction();
if (!F || MF->getMMI().callsEHReturn())
return 0;
- static const uint16_t CallerSavedRegs32Bit[] = {
- X86::EAX, X86::EDX, X86::ECX, 0
- };
-
- static const uint16_t CallerSavedRegs64Bit[] = {
- X86::RAX, X86::RDX, X86::RCX, X86::RSI, X86::RDI,
- X86::R8, X86::R9, X86::R10, X86::R11, 0
- };
+ const TargetRegisterClass &AvailableRegs = *TRI->getGPRsForTailCall(*MF);
unsigned Opc = MBBI->getOpcode();
switch (Opc) {
Uses.insert(*AI);
}
- const uint16_t *CS = Is64Bit ? CallerSavedRegs64Bit : CallerSavedRegs32Bit;
- for (; *CS; ++CS)
- if (!Uses.count(*CS))
- return *CS;
+ for (auto CS : AvailableRegs)
+ if (!Uses.count(CS) && CS != X86::RIP)
+ return CS;
}
}
return false;
}
-/// Check whether or not the terminators of \p MBB needs to read EFLAGS.
-static bool terminatorsNeedFlagsAsInput(const MachineBasicBlock &MBB) {
+/// Check if the flags need to be preserved before the terminators.
+/// This would be the case, if the eflags is live-in of the region
+/// composed by the terminators or live-out of that region, without
+/// being defined by a terminator.
+static bool
+flagsNeedToBePreservedBeforeTheTerminators(const MachineBasicBlock &MBB) {
for (const MachineInstr &MI : MBB.terminators()) {
bool BreakNext = false;
for (const MachineOperand &MO : MI.operands()) {
if (Reg != X86::EFLAGS)
continue;
- // This terminator needs an eflag that is not defined
- // by a previous terminator.
+ // This terminator needs an eflags that is not defined
+ // by a previous another terminator:
+ // EFLAGS is live-in of the region composed by the terminators.
if (!MO.isDef())
return true;
+ // This terminator defines the eflags, i.e., we don't need to preserve it.
+ // However, we still need to check this specific terminator does not
+ // read a live-in value.
BreakNext = true;
}
+ // We found a definition of the eflags, no need to preserve them.
if (BreakNext)
- break;
+ return false;
}
+
+ // None of the terminators use or define the eflags.
+ // Check if they are live-out, that would imply we need to preserve them.
+ for (const MachineBasicBlock *Succ : MBB.successors())
+ if (Succ->isLiveIn(X86::EFLAGS))
+ return true;
+
return false;
}
// is tricky.
bool UseLEA;
if (!InEpilogue) {
- UseLEA = STI.useLeaForSP();
+ // Check if inserting the prologue at the beginning
+ // of MBB would require to use LEA operations.
+ // We need to use LEA operations if EFLAGS is live in, because
+ // it means an instruction will read it before it gets defined.
+ UseLEA = STI.useLeaForSP() || MBB.isLiveIn(X86::EFLAGS);
} else {
// If we can use LEA for SP but we shouldn't, check that none
// of the terminators uses the eflags. Otherwise we will insert
// and is an optimization anyway.
UseLEA = canUseLEAForSPInEpilogue(*MBB.getParent());
if (UseLEA && !STI.useLeaForSP())
- UseLEA = terminatorsNeedFlagsAsInput(MBB);
+ UseLEA = flagsNeedToBePreservedBeforeTheTerminators(MBB);
// If that assert breaks, that means we do not do the right thing
// in canUseAsEpilogue.
- assert((UseLEA || !terminatorsNeedFlagsAsInput(MBB)) &&
+ assert((UseLEA || !flagsNeedToBePreservedBeforeTheTerminators(MBB)) &&
"We shouldn't have allowed this insertion point");
}
return false;
}
-void X86FrameLowering::emitStackProbeCall(MachineFunction &MF,
- MachineBasicBlock &MBB,
- MachineBasicBlock::iterator MBBI,
- DebugLoc DL) const {
+MachineInstr *X86FrameLowering::emitStackProbe(MachineFunction &MF,
+ MachineBasicBlock &MBB,
+ MachineBasicBlock::iterator MBBI,
+ DebugLoc DL,
+ bool InProlog) const {
+ const X86Subtarget &STI = MF.getSubtarget<X86Subtarget>();
+ if (STI.isTargetWindowsCoreCLR()) {
+ if (InProlog) {
+ return emitStackProbeInlineStub(MF, MBB, MBBI, DL, true);
+ } else {
+ return emitStackProbeInline(MF, MBB, MBBI, DL, false);
+ }
+ } else {
+ return emitStackProbeCall(MF, MBB, MBBI, DL, InProlog);
+ }
+}
+
+void X86FrameLowering::inlineStackProbe(MachineFunction &MF,
+ MachineBasicBlock &PrologMBB) const {
+ const StringRef ChkStkStubSymbol = "__chkstk_stub";
+ MachineInstr *ChkStkStub = nullptr;
+
+ for (MachineInstr &MI : PrologMBB) {
+ if (MI.isCall() && MI.getOperand(0).isSymbol() &&
+ ChkStkStubSymbol == MI.getOperand(0).getSymbolName()) {
+ ChkStkStub = &MI;
+ break;
+ }
+ }
+
+ if (ChkStkStub != nullptr) {
+ MachineBasicBlock::iterator MBBI = std::next(ChkStkStub->getIterator());
+ assert(std::prev(MBBI).operator==(ChkStkStub) &&
+ "MBBI expected after __chkstk_stub.");
+ DebugLoc DL = PrologMBB.findDebugLoc(MBBI);
+ emitStackProbeInline(MF, PrologMBB, MBBI, DL, true);
+ ChkStkStub->eraseFromParent();
+ }
+}
+
+MachineInstr *X86FrameLowering::emitStackProbeInline(
+ MachineFunction &MF, MachineBasicBlock &MBB,
+ MachineBasicBlock::iterator MBBI, DebugLoc DL, bool InProlog) const {
+ const X86Subtarget &STI = MF.getSubtarget<X86Subtarget>();
+ assert(STI.is64Bit() && "different expansion needed for 32 bit");
+ assert(STI.isTargetWindowsCoreCLR() && "custom expansion expects CoreCLR");
+ const TargetInstrInfo &TII = *STI.getInstrInfo();
+ const BasicBlock *LLVM_BB = MBB.getBasicBlock();
+
+ // RAX contains the number of bytes of desired stack adjustment.
+ // The handling here assumes this value has already been updated so as to
+ // maintain stack alignment.
+ //
+ // We need to exit with RSP modified by this amount and execute suitable
+ // page touches to notify the OS that we're growing the stack responsibly.
+ // All stack probing must be done without modifying RSP.
+ //
+ // MBB:
+ // SizeReg = RAX;
+ // ZeroReg = 0
+ // CopyReg = RSP
+ // Flags, TestReg = CopyReg - SizeReg
+ // FinalReg = !Flags.Ovf ? TestReg : ZeroReg
+ // LimitReg = gs magic thread env access
+ // if FinalReg >= LimitReg goto ContinueMBB
+ // RoundBB:
+ // RoundReg = page address of FinalReg
+ // LoopMBB:
+ // LoopReg = PHI(LimitReg,ProbeReg)
+ // ProbeReg = LoopReg - PageSize
+ // [ProbeReg] = 0
+ // if (ProbeReg > RoundReg) goto LoopMBB
+ // ContinueMBB:
+ // RSP = RSP - RAX
+ // [rest of original MBB]
+
+ // Set up the new basic blocks
+ MachineBasicBlock *RoundMBB = MF.CreateMachineBasicBlock(LLVM_BB);
+ MachineBasicBlock *LoopMBB = MF.CreateMachineBasicBlock(LLVM_BB);
+ MachineBasicBlock *ContinueMBB = MF.CreateMachineBasicBlock(LLVM_BB);
+
+ MachineFunction::iterator MBBIter = std::next(MBB.getIterator());
+ MF.insert(MBBIter, RoundMBB);
+ MF.insert(MBBIter, LoopMBB);
+ MF.insert(MBBIter, ContinueMBB);
+
+ // Split MBB and move the tail portion down to ContinueMBB.
+ MachineBasicBlock::iterator BeforeMBBI = std::prev(MBBI);
+ ContinueMBB->splice(ContinueMBB->begin(), &MBB, MBBI, MBB.end());
+ ContinueMBB->transferSuccessorsAndUpdatePHIs(&MBB);
+
+ // Some useful constants
+ const int64_t ThreadEnvironmentStackLimit = 0x10;
+ const int64_t PageSize = 0x1000;
+ const int64_t PageMask = ~(PageSize - 1);
+
+ // Registers we need. For the normal case we use virtual
+ // registers. For the prolog expansion we use RAX, RCX and RDX.
+ MachineRegisterInfo &MRI = MF.getRegInfo();
+ const TargetRegisterClass *RegClass = &X86::GR64RegClass;
+ const unsigned SizeReg = InProlog ? (unsigned)X86::RAX
+ : MRI.createVirtualRegister(RegClass),
+ ZeroReg = InProlog ? (unsigned)X86::RCX
+ : MRI.createVirtualRegister(RegClass),
+ CopyReg = InProlog ? (unsigned)X86::RDX
+ : MRI.createVirtualRegister(RegClass),
+ TestReg = InProlog ? (unsigned)X86::RDX
+ : MRI.createVirtualRegister(RegClass),
+ FinalReg = InProlog ? (unsigned)X86::RDX
+ : MRI.createVirtualRegister(RegClass),
+ RoundedReg = InProlog ? (unsigned)X86::RDX
+ : MRI.createVirtualRegister(RegClass),
+ LimitReg = InProlog ? (unsigned)X86::RCX
+ : MRI.createVirtualRegister(RegClass),
+ JoinReg = InProlog ? (unsigned)X86::RCX
+ : MRI.createVirtualRegister(RegClass),
+ ProbeReg = InProlog ? (unsigned)X86::RCX
+ : MRI.createVirtualRegister(RegClass);
+
+ // SP-relative offsets where we can save RCX and RDX.
+ int64_t RCXShadowSlot = 0;
+ int64_t RDXShadowSlot = 0;
+
+ // If inlining in the prolog, save RCX and RDX.
+ // Future optimization: don't save or restore if not live in.
+ if (InProlog) {
+ // Compute the offsets. We need to account for things already
+ // pushed onto the stack at this point: return address, frame
+ // pointer (if used), and callee saves.
+ X86MachineFunctionInfo *X86FI = MF.getInfo<X86MachineFunctionInfo>();
+ const int64_t CalleeSaveSize = X86FI->getCalleeSavedFrameSize();
+ const bool HasFP = hasFP(MF);
+ RCXShadowSlot = 8 + CalleeSaveSize + (HasFP ? 8 : 0);
+ RDXShadowSlot = RCXShadowSlot + 8;
+ // Emit the saves.
+ addRegOffset(BuildMI(&MBB, DL, TII.get(X86::MOV64mr)), X86::RSP, false,
+ RCXShadowSlot)
+ .addReg(X86::RCX);
+ addRegOffset(BuildMI(&MBB, DL, TII.get(X86::MOV64mr)), X86::RSP, false,
+ RDXShadowSlot)
+ .addReg(X86::RDX);
+ } else {
+ // Not in the prolog. Copy RAX to a virtual reg.
+ BuildMI(&MBB, DL, TII.get(X86::MOV64rr), SizeReg).addReg(X86::RAX);
+ }
+
+ // Add code to MBB to check for overflow and set the new target stack pointer
+ // to zero if so.
+ BuildMI(&MBB, DL, TII.get(X86::XOR64rr), ZeroReg)
+ .addReg(ZeroReg, RegState::Undef)
+ .addReg(ZeroReg, RegState::Undef);
+ BuildMI(&MBB, DL, TII.get(X86::MOV64rr), CopyReg).addReg(X86::RSP);
+ BuildMI(&MBB, DL, TII.get(X86::SUB64rr), TestReg)
+ .addReg(CopyReg)
+ .addReg(SizeReg);
+ BuildMI(&MBB, DL, TII.get(X86::CMOVB64rr), FinalReg)
+ .addReg(TestReg)
+ .addReg(ZeroReg);
+
+ // FinalReg now holds final stack pointer value, or zero if
+ // allocation would overflow. Compare against the current stack
+ // limit from the thread environment block. Note this limit is the
+ // lowest touched page on the stack, not the point at which the OS
+ // will cause an overflow exception, so this is just an optimization
+ // to avoid unnecessarily touching pages that are below the current
+ // SP but already commited to the stack by the OS.
+ BuildMI(&MBB, DL, TII.get(X86::MOV64rm), LimitReg)
+ .addReg(0)
+ .addImm(1)
+ .addReg(0)
+ .addImm(ThreadEnvironmentStackLimit)
+ .addReg(X86::GS);
+ BuildMI(&MBB, DL, TII.get(X86::CMP64rr)).addReg(FinalReg).addReg(LimitReg);
+ // Jump if the desired stack pointer is at or above the stack limit.
+ BuildMI(&MBB, DL, TII.get(X86::JAE_1)).addMBB(ContinueMBB);
+
+ // Add code to roundMBB to round the final stack pointer to a page boundary.
+ BuildMI(RoundMBB, DL, TII.get(X86::AND64ri32), RoundedReg)
+ .addReg(FinalReg)
+ .addImm(PageMask);
+ BuildMI(RoundMBB, DL, TII.get(X86::JMP_1)).addMBB(LoopMBB);
+
+ // LimitReg now holds the current stack limit, RoundedReg page-rounded
+ // final RSP value. Add code to loopMBB to decrement LimitReg page-by-page
+ // and probe until we reach RoundedReg.
+ if (!InProlog) {
+ BuildMI(LoopMBB, DL, TII.get(X86::PHI), JoinReg)
+ .addReg(LimitReg)
+ .addMBB(RoundMBB)
+ .addReg(ProbeReg)
+ .addMBB(LoopMBB);
+ }
+
+ addRegOffset(BuildMI(LoopMBB, DL, TII.get(X86::LEA64r), ProbeReg), JoinReg,
+ false, -PageSize);
+
+ // Probe by storing a byte onto the stack.
+ BuildMI(LoopMBB, DL, TII.get(X86::MOV8mi))
+ .addReg(ProbeReg)
+ .addImm(1)
+ .addReg(0)
+ .addImm(0)
+ .addReg(0)
+ .addImm(0);
+ BuildMI(LoopMBB, DL, TII.get(X86::CMP64rr))
+ .addReg(RoundedReg)
+ .addReg(ProbeReg);
+ BuildMI(LoopMBB, DL, TII.get(X86::JNE_1)).addMBB(LoopMBB);
+
+ MachineBasicBlock::iterator ContinueMBBI = ContinueMBB->getFirstNonPHI();
+
+ // If in prolog, restore RDX and RCX.
+ if (InProlog) {
+ addRegOffset(BuildMI(*ContinueMBB, ContinueMBBI, DL, TII.get(X86::MOV64rm),
+ X86::RCX),
+ X86::RSP, false, RCXShadowSlot);
+ addRegOffset(BuildMI(*ContinueMBB, ContinueMBBI, DL, TII.get(X86::MOV64rm),
+ X86::RDX),
+ X86::RSP, false, RDXShadowSlot);
+ }
+
+ // Now that the probing is done, add code to continueMBB to update
+ // the stack pointer for real.
+ BuildMI(*ContinueMBB, ContinueMBBI, DL, TII.get(X86::SUB64rr), X86::RSP)
+ .addReg(X86::RSP)
+ .addReg(SizeReg);
+
+ // Add the control flow edges we need.
+ MBB.addSuccessor(ContinueMBB);
+ MBB.addSuccessor(RoundMBB);
+ RoundMBB->addSuccessor(LoopMBB);
+ LoopMBB->addSuccessor(ContinueMBB);
+ LoopMBB->addSuccessor(LoopMBB);
+
+ // Mark all the instructions added to the prolog as frame setup.
+ if (InProlog) {
+ for (++BeforeMBBI; BeforeMBBI != MBB.end(); ++BeforeMBBI) {
+ BeforeMBBI->setFlag(MachineInstr::FrameSetup);
+ }
+ for (MachineInstr &MI : *RoundMBB) {
+ MI.setFlag(MachineInstr::FrameSetup);
+ }
+ for (MachineInstr &MI : *LoopMBB) {
+ MI.setFlag(MachineInstr::FrameSetup);
+ }
+ for (MachineBasicBlock::iterator CMBBI = ContinueMBB->begin();
+ CMBBI != ContinueMBBI; ++CMBBI) {
+ CMBBI->setFlag(MachineInstr::FrameSetup);
+ }
+ }
+
+ // Possible TODO: physreg liveness for InProlog case.
+
+ return ContinueMBBI;
+}
+
+MachineInstr *X86FrameLowering::emitStackProbeCall(
+ MachineFunction &MF, MachineBasicBlock &MBB,
+ MachineBasicBlock::iterator MBBI, DebugLoc DL, bool InProlog) const {
bool IsLargeCodeModel = MF.getTarget().getCodeModel() == CodeModel::Large;
unsigned CallOp;
Symbol = "_chkstk";
MachineInstrBuilder CI;
+ MachineBasicBlock::iterator ExpansionMBBI = std::prev(MBBI);
// All current stack probes take AX and SP as input, clobber flags, and
// preserve all registers. x86_64 probes leave RSP unmodified.
.addReg(X86::RSP)
.addReg(X86::RAX);
}
+
+ if (InProlog) {
+ // Apply the frame setup flag to all inserted instrs.
+ for (++ExpansionMBBI; ExpansionMBBI != MBBI; ++ExpansionMBBI)
+ ExpansionMBBI->setFlag(MachineInstr::FrameSetup);
+ }
+
+ return MBBI;
+}
+
+MachineInstr *X86FrameLowering::emitStackProbeInlineStub(
+ MachineFunction &MF, MachineBasicBlock &MBB,
+ MachineBasicBlock::iterator MBBI, DebugLoc DL, bool InProlog) const {
+
+ assert(InProlog && "ChkStkStub called outside prolog!");
+
+ BuildMI(MBB, MBBI, DL, TII.get(X86::CALLpcrel32))
+ .addExternalSymbol("__chkstk_stub");
+
+ return MBBI;
}
static unsigned calculateSetFPREG(uint64_t SPAdjust) {
void X86FrameLowering::BuildStackAlignAND(MachineBasicBlock &MBB,
MachineBasicBlock::iterator MBBI,
- DebugLoc DL,
+ DebugLoc DL, unsigned Reg,
uint64_t MaxAlign) const {
uint64_t Val = -MaxAlign;
- MachineInstr *MI =
- BuildMI(MBB, MBBI, DL, TII.get(getANDriOpcode(Uses64BitFramePtr, Val)),
- StackPtr)
- .addReg(StackPtr)
- .addImm(Val)
- .setMIFlag(MachineInstr::FrameSetup);
+ unsigned AndOp = getANDriOpcode(Uses64BitFramePtr, Val);
+ MachineInstr *MI = BuildMI(MBB, MBBI, DL, TII.get(AndOp), Reg)
+ .addReg(Reg)
+ .addImm(Val)
+ .setMIFlag(MachineInstr::FrameSetup);
// The EFLAGS implicit def is dead.
MI->getOperand(3).setIsDead();
uint64_t MaxAlign = calculateMaxStackAlign(MF); // Desired stack alignment.
uint64_t StackSize = MFI->getStackSize(); // Number of bytes to allocate.
bool IsFunclet = MBB.isEHFuncletEntry();
+ EHPersonality Personality = EHPersonality::Unknown;
+ if (Fn->hasPersonalityFn())
+ Personality = classifyEHPersonality(Fn->getPersonalityFn());
+ bool FnHasClrFunclet =
+ MMI.hasEHFunclets() && Personality == EHPersonality::CoreCLR;
+ bool IsClrFunclet = IsFunclet && FnHasClrFunclet;
bool HasFP = hasFP(MF);
bool IsWin64CC = STI.isCallingConvWin64(Fn->getCallingConv());
bool IsWin64Prologue = MF.getTarget().getMCAsmInfo()->usesWindowsCFI();
unsigned FramePtr = TRI->getFrameRegister(MF);
const unsigned MachineFramePtr =
STI.isTarget64BitILP32()
- ? getX86SubSuperRegister(FramePtr, MVT::i64, false)
- : FramePtr;
+ ? getX86SubSuperRegister(FramePtr, MVT::i64) : FramePtr;
unsigned BasePtr = TRI->getBaseRegister();
+
+ // Debug location must be unknown since the first debug location is used
+ // to determine the end of the prologue.
DebugLoc DL;
// Add RETADDR move area to callee saved frame size.
uint64_t NumBytes = 0;
int stackGrowth = -SlotSize;
- unsigned RDX = Uses64BitFramePtr ? X86::RDX : X86::EDX;
- if (IsWin64Prologue && IsFunclet) {
- // Immediately spill RDX into the home slot. The runtime cares about this.
+ // Find the funclet establisher parameter
+ unsigned Establisher = X86::NoRegister;
+ if (IsClrFunclet)
+ Establisher = Uses64BitFramePtr ? X86::RCX : X86::ECX;
+ else if (IsFunclet)
+ Establisher = Uses64BitFramePtr ? X86::RDX : X86::EDX;
+
+ if (IsWin64Prologue && IsFunclet && !IsClrFunclet) {
+ // Immediately spill establisher into the home slot.
+ // The runtime cares about this.
// MOV64mr %rdx, 16(%rsp)
unsigned MOVmr = Uses64BitFramePtr ? X86::MOV64mr : X86::MOV32mr;
addRegOffset(BuildMI(MBB, MBBI, DL, TII.get(MOVmr)), StackPtr, true, 16)
- .addReg(RDX)
+ .addReg(Establisher)
.setMIFlag(MachineInstr::FrameSetup);
+ MBB.addLiveIn(Establisher);
}
if (HasFP) {
}
}
- // Mark the FramePtr as live-in in every block.
- for (MachineFunction::iterator I = MF.begin(), E = MF.end(); I != E; ++I)
- I->addLiveIn(MachineFramePtr);
+ // Mark the FramePtr as live-in in every block. Don't do this again for
+ // funclet prologues.
+ if (!IsFunclet) {
+ for (MachineBasicBlock &EveryMBB : MF)
+ EveryMBB.addLiveIn(MachineFramePtr);
+ }
} else {
assert(!IsFunclet && "funclets without FPs not yet implemented");
NumBytes = StackSize - X86FI->getCalleeSavedFrameSize();
// NumBytes value that we would've used for the parent frame.
unsigned ParentFrameNumBytes = NumBytes;
if (IsFunclet)
- NumBytes = MFI->getMaxCallFrameSize();
+ NumBytes = getWinEHFuncletFrameSize(MF);
// Skip the callee-saved push instructions.
bool PushedRegs = false;
// Don't do this for Win64, it needs to realign the stack after the prologue.
if (!IsWin64Prologue && !IsFunclet && TRI->needsStackRealignment(MF)) {
assert(HasFP && "There should be a frame pointer if stack is realigned.");
- BuildStackAlignAND(MBB, MBBI, DL, MaxAlign);
+ BuildStackAlignAND(MBB, MBBI, DL, StackPtr, MaxAlign);
}
// If there is an SUB32ri of ESP immediately before this instruction, merge
// Allocate NumBytes-4 bytes on stack in case of isEAXAlive.
// We'll also use 4 already allocated bytes for EAX.
BuildMI(MBB, MBBI, DL, TII.get(X86::MOV32ri), X86::EAX)
- .addImm(isEAXAlive ? NumBytes - 4 : NumBytes)
- .setMIFlag(MachineInstr::FrameSetup);
+ .addImm(isEAXAlive ? NumBytes - 4 : NumBytes)
+ .setMIFlag(MachineInstr::FrameSetup);
}
- // Save a pointer to the MI where we set AX.
- MachineBasicBlock::iterator SetRAX = MBBI;
- --SetRAX;
-
// Call __chkstk, __chkstk_ms, or __alloca.
- emitStackProbeCall(MF, MBB, MBBI, DL);
-
- // Apply the frame setup flag to all inserted instrs.
- for (; SetRAX != MBBI; ++SetRAX)
- SetRAX->setFlag(MachineInstr::FrameSetup);
+ emitStackProbe(MF, MBB, MBBI, DL, true);
if (isEAXAlive) {
// Restore EAX
- MachineInstr *MI = addRegOffset(BuildMI(MF, DL, TII.get(X86::MOV32rm),
- X86::EAX),
- StackPtr, false, NumBytes - 4);
+ MachineInstr *MI =
+ addRegOffset(BuildMI(MF, DL, TII.get(X86::MOV32rm), X86::EAX),
+ StackPtr, false, NumBytes - 4);
MI->setFlag(MachineInstr::FrameSetup);
MBB.insert(MBBI, MI);
}
.setMIFlag(MachineInstr::FrameSetup);
int SEHFrameOffset = 0;
+ unsigned SPOrEstablisher;
+ if (IsFunclet) {
+ if (IsClrFunclet) {
+ // The establisher parameter passed to a CLR funclet is actually a pointer
+ // to the (mostly empty) frame of its nearest enclosing funclet; we have
+ // to find the root function establisher frame by loading the PSPSym from
+ // the intermediate frame.
+ unsigned PSPSlotOffset = getPSPSlotOffsetFromSP(MF);
+ MachinePointerInfo NoInfo;
+ MBB.addLiveIn(Establisher);
+ addRegOffset(BuildMI(MBB, MBBI, DL, TII.get(X86::MOV64rm), Establisher),
+ Establisher, false, PSPSlotOffset)
+ .addMemOperand(MF.getMachineMemOperand(
+ NoInfo, MachineMemOperand::MOLoad, SlotSize, SlotSize));
+ ;
+ // Save the root establisher back into the current funclet's (mostly
+ // empty) frame, in case a sub-funclet or the GC needs it.
+ addRegOffset(BuildMI(MBB, MBBI, DL, TII.get(X86::MOV64mr)), StackPtr,
+ false, PSPSlotOffset)
+ .addReg(Establisher)
+ .addMemOperand(
+ MF.getMachineMemOperand(NoInfo, MachineMemOperand::MOStore |
+ MachineMemOperand::MOVolatile,
+ SlotSize, SlotSize));
+ }
+ SPOrEstablisher = Establisher;
+ } else {
+ SPOrEstablisher = StackPtr;
+ }
+
if (IsWin64Prologue && HasFP) {
// Set RBP to a small fixed offset from RSP. In the funclet case, we base
- // this calculation on the incoming RDX, which holds the value of RSP from
- // the parent frame at the end of the prologue.
- unsigned SPOrRDX = !IsFunclet ? StackPtr : RDX;
+ // this calculation on the incoming establisher, which holds the value of
+ // RSP from the parent frame at the end of the prologue.
SEHFrameOffset = calculateSetFPREG(ParentFrameNumBytes);
if (SEHFrameOffset)
addRegOffset(BuildMI(MBB, MBBI, DL, TII.get(X86::LEA64r), FramePtr),
- SPOrRDX, false, SEHFrameOffset);
+ SPOrEstablisher, false, SEHFrameOffset);
else
BuildMI(MBB, MBBI, DL, TII.get(X86::MOV64rr), FramePtr)
- .addReg(SPOrRDX);
+ .addReg(SPOrEstablisher);
// If this is not a funclet, emit the CFI describing our frame pointer.
- if (NeedsWinCFI && !IsFunclet)
+ if (NeedsWinCFI && !IsFunclet) {
BuildMI(MBB, MBBI, DL, TII.get(X86::SEH_SetFrame))
.addImm(FramePtr)
.addImm(SEHFrameOffset)
.setMIFlag(MachineInstr::FrameSetup);
+ if (isAsynchronousEHPersonality(Personality))
+ MF.getWinEHFuncInfo()->SEHSetFrameOffset = SEHFrameOffset;
+ }
} else if (IsFunclet && STI.is32Bit()) {
// Reset EBP / ESI to something good for funclets.
MBBI = restoreWin32EHStackPointers(MBB, MBBI, DL);
+ // If we're a catch funclet, we can be returned to via catchret. Save ESP
+ // into the registration node so that the runtime will restore it for us.
+ if (!MBB.isCleanupFuncletEntry()) {
+ assert(Personality == EHPersonality::MSVC_CXX);
+ unsigned FrameReg;
+ int FI = MF.getWinEHFuncInfo()->EHRegNodeFrameIndex;
+ int64_t EHRegOffset = getFrameIndexReference(MF, FI, FrameReg);
+ // ESP is the first field, so no extra displacement is needed.
+ addRegOffset(BuildMI(MBB, MBBI, DL, TII.get(X86::MOV32mr)), FrameReg,
+ false, EHRegOffset)
+ .addReg(X86::ESP);
+ }
}
while (MBBI != MBB.end() && MBBI->getFlag(MachineInstr::FrameSetup)) {
BuildMI(MBB, MBBI, DL, TII.get(X86::SEH_EndPrologue))
.setMIFlag(MachineInstr::FrameSetup);
+ if (FnHasClrFunclet && !IsFunclet) {
+ // Save the so-called Initial-SP (i.e. the value of the stack pointer
+ // immediately after the prolog) into the PSPSlot so that funclets
+ // and the GC can recover it.
+ unsigned PSPSlotOffset = getPSPSlotOffsetFromSP(MF);
+ auto PSPInfo = MachinePointerInfo::getFixedStack(
+ MF, MF.getWinEHFuncInfo()->PSPSymFrameIdx);
+ addRegOffset(BuildMI(MBB, MBBI, DL, TII.get(X86::MOV64mr)), StackPtr, false,
+ PSPSlotOffset)
+ .addReg(StackPtr)
+ .addMemOperand(MF.getMachineMemOperand(
+ PSPInfo, MachineMemOperand::MOStore | MachineMemOperand::MOVolatile,
+ SlotSize, SlotSize));
+ }
+
// Realign stack after we spilled callee-saved registers (so that we'll be
// able to calculate their offsets from the frame pointer).
// Win64 requires aligning the stack after the prologue.
if (IsWin64Prologue && TRI->needsStackRealignment(MF)) {
assert(HasFP && "There should be a frame pointer if stack is realigned.");
- BuildStackAlignAND(MBB, MBBI, DL, MaxAlign);
+ BuildStackAlignAND(MBB, MBBI, DL, SPOrEstablisher, MaxAlign);
}
+ // We already dealt with stack realignment and funclets above.
+ if (IsFunclet && STI.is32Bit())
+ return;
+
// If we need a base pointer, set it up here. It's whatever the value
// of the stack pointer is at this point. Any variable size objects
// will be allocated after this, so we can still use the base pointer
// Update the base pointer with the current stack pointer.
unsigned Opc = Uses64BitFramePtr ? X86::MOV64rr : X86::MOV32rr;
BuildMI(MBB, MBBI, DL, TII.get(Opc), BasePtr)
- .addReg(StackPtr)
+ .addReg(SPOrEstablisher)
.setMIFlag(MachineInstr::FrameSetup);
if (X86FI->getRestoreBasePointer()) {
// Stash value of base pointer. Saving RSP instead of EBP shortens
unsigned Opm = Uses64BitFramePtr ? X86::MOV64mr : X86::MOV32mr;
addRegOffset(BuildMI(MBB, MBBI, DL, TII.get(Opm)),
FramePtr, true, X86FI->getRestoreBasePointerOffset())
- .addReg(StackPtr)
+ .addReg(SPOrEstablisher)
.setMIFlag(MachineInstr::FrameSetup);
}
- if (X86FI->getHasSEHFramePtrSave()) {
+ if (X86FI->getHasSEHFramePtrSave() && !IsFunclet) {
// Stash the value of the frame pointer relative to the base pointer for
// Win32 EH. This supports Win32 EH, which does the inverse of the above:
// it recovers the frame pointer from the base pointer rather than the
llvm_unreachable("impossible");
}
+// CLR funclets use a special "Previous Stack Pointer Symbol" slot on the
+// stack. It holds a pointer to the bottom of the root function frame. The
+// establisher frame pointer passed to a nested funclet may point to the
+// (mostly empty) frame of its parent funclet, but it will need to find
+// the frame of the root function to access locals. To facilitate this,
+// every funclet copies the pointer to the bottom of the root function
+// frame into a PSPSym slot in its own (mostly empty) stack frame. Using the
+// same offset for the PSPSym in the root function frame that's used in the
+// funclets' frames allows each funclet to dynamically accept any ancestor
+// frame as its establisher argument (the runtime doesn't guarantee the
+// immediate parent for some reason lost to history), and also allows the GC,
+// which uses the PSPSym for some bookkeeping, to find it in any funclet's
+// frame with only a single offset reported for the entire method.
+unsigned
+X86FrameLowering::getPSPSlotOffsetFromSP(const MachineFunction &MF) const {
+ const WinEHFuncInfo &Info = *MF.getWinEHFuncInfo();
+ // getFrameIndexReferenceFromSP has an out ref parameter for the stack
+ // pointer register; pass a dummy that we ignore
+ unsigned SPReg;
+ int Offset = getFrameIndexReferenceFromSP(MF, Info.PSPSymFrameIdx, SPReg);
+ assert(Offset >= 0);
+ return static_cast<unsigned>(Offset);
+}
+
+unsigned
+X86FrameLowering::getWinEHFuncletFrameSize(const MachineFunction &MF) const {
+ // This is the size of the pushed CSRs.
+ unsigned CSSize =
+ MF.getInfo<X86MachineFunctionInfo>()->getCalleeSavedFrameSize();
+ // This is the amount of stack a funclet needs to allocate.
+ unsigned UsedSize;
+ EHPersonality Personality =
+ classifyEHPersonality(MF.getFunction()->getPersonalityFn());
+ if (Personality == EHPersonality::CoreCLR) {
+ // CLR funclets need to hold enough space to include the PSPSym, at the
+ // same offset from the stack pointer (immediately after the prolog) as it
+ // resides at in the main function.
+ UsedSize = getPSPSlotOffsetFromSP(MF) + SlotSize;
+ } else {
+ // Other funclets just need enough stack for outgoing call arguments.
+ UsedSize = MF.getFrameInfo()->getMaxCallFrameSize();
+ }
+ // RBP is not included in the callee saved register block. After pushing RBP,
+ // everything is 16 byte aligned. Everything we allocate before an outgoing
+ // call must also be 16 byte aligned.
+ unsigned FrameSizeMinusRBP =
+ RoundUpToAlignment(CSSize + UsedSize, getStackAlignment());
+ // Subtract out the size of the callee saved registers. This is how much stack
+ // each funclet will allocate.
+ return FrameSizeMinusRBP - CSSize;
+}
+
void X86FrameLowering::emitEpilogue(MachineFunction &MF,
MachineBasicBlock &MBB) const {
const MachineFrameInfo *MFI = MF.getFrameInfo();
const bool Is64BitILP32 = STI.isTarget64BitILP32();
unsigned FramePtr = TRI->getFrameRegister(MF);
unsigned MachineFramePtr =
- Is64BitILP32 ? getX86SubSuperRegister(FramePtr, MVT::i64, false)
- : FramePtr;
+ Is64BitILP32 ? getX86SubSuperRegister(FramePtr, MVT::i64) : FramePtr;
bool IsWin64Prologue = MF.getTarget().getMCAsmInfo()->usesWindowsCFI();
bool NeedsWinCFI =
IsWin64Prologue && MF.getFunction()->needsUnwindTableEntry();
bool IsFunclet = isFuncletReturnInstr(MBBI);
- MachineBasicBlock *RestoreMBB = nullptr;
+ MachineBasicBlock *TargetMBB = nullptr;
// Get the number of bytes to allocate from the FrameInfo.
uint64_t StackSize = MFI->getStackSize();
uint64_t NumBytes = 0;
if (MBBI->getOpcode() == X86::CATCHRET) {
- NumBytes = MFI->getMaxCallFrameSize();
- assert(hasFP(MF) && "EH funclets without FP not yet implemented");
- MachineBasicBlock *TargetMBB = MBBI->getOperand(0).getMBB();
-
- // If this is SEH, this isn't really a funclet return.
- bool IsSEH = isAsynchronousEHPersonality(
- classifyEHPersonality(MF.getFunction()->getPersonalityFn()));
- if (IsSEH) {
- if (STI.is32Bit())
- restoreWin32EHStackPointers(MBB, MBBI, DL, /*RestoreSP=*/true);
- BuildMI(MBB, MBBI, DL, TII.get(X86::JMP_4)).addMBB(TargetMBB);
- MBBI->eraseFromParent();
- return;
- }
+ // SEH shouldn't use catchret.
+ assert(!isAsynchronousEHPersonality(
+ classifyEHPersonality(MF.getFunction()->getPersonalityFn())) &&
+ "SEH should not use CATCHRET");
- // For 32-bit, create a new block for the restore code.
- RestoreMBB = TargetMBB;
- if (STI.is32Bit()) {
- RestoreMBB = MF.CreateMachineBasicBlock(MBB.getBasicBlock());
- MF.insert(TargetMBB, RestoreMBB);
- MBB.removeSuccessor(TargetMBB);
- MBB.addSuccessor(RestoreMBB);
- RestoreMBB->addSuccessor(TargetMBB);
- MBBI->getOperand(0).setMBB(RestoreMBB);
- }
+ NumBytes = getWinEHFuncletFrameSize(MF);
+ assert(hasFP(MF) && "EH funclets without FP not yet implemented");
+ TargetMBB = MBBI->getOperand(0).getMBB();
// Pop EBP.
BuildMI(MBB, MBBI, DL, TII.get(Is64Bit ? X86::POP64r : X86::POP32r),
MachineFramePtr)
.setMIFlag(MachineInstr::FrameDestroy);
-
- // Insert frame restoration code in a new block.
- if (STI.is32Bit()) {
- auto RestoreMBBI = RestoreMBB->begin();
- restoreWin32EHStackPointers(*RestoreMBB, RestoreMBBI, DL,
- /*RestoreSP=*/true);
- BuildMI(*RestoreMBB, RestoreMBBI, DL, TII.get(X86::JMP_4))
- .addMBB(TargetMBB);
- }
} else if (MBBI->getOpcode() == X86::CLEANUPRET) {
- NumBytes = MFI->getMaxCallFrameSize();
+ NumBytes = getWinEHFuncletFrameSize(MF);
assert(hasFP(MF) && "EH funclets without FP not yet implemented");
BuildMI(MBB, MBBI, DL, TII.get(Is64Bit ? X86::POP64r : X86::POP32r),
MachineFramePtr)
}
MachineBasicBlock::iterator FirstCSPop = MBBI;
- if (RestoreMBB) {
+ if (TargetMBB) {
// Fill EAX/RAX with the address of the target block.
unsigned ReturnReg = STI.is64Bit() ? X86::RAX : X86::EAX;
if (STI.is64Bit()) {
- // LEA64r RestoreMBB(%rip), %rax
+ // LEA64r TargetMBB(%rip), %rax
BuildMI(MBB, FirstCSPop, DL, TII.get(X86::LEA64r), ReturnReg)
.addReg(X86::RIP)
.addImm(0)
.addReg(0)
- .addMBB(RestoreMBB)
+ .addMBB(TargetMBB)
.addReg(0);
} else {
- // MOV32ri $RestoreMBB, %eax
- BuildMI(MBB, FirstCSPop, DL, TII.get(X86::MOV32ri))
- .addReg(ReturnReg)
- .addMBB(RestoreMBB);
+ // MOV32ri $TargetMBB, %eax
+ BuildMI(MBB, FirstCSPop, DL, TII.get(X86::MOV32ri), ReturnReg)
+ .addMBB(TargetMBB);
}
+ // Record that we've taken the address of TargetMBB and no longer just
+ // reference it in a terminator.
+ TargetMBB->setHasAddressTaken();
}
if (MBBI != MBB.end())
const uint64_t StackSize = MFI->getStackSize();
{
#ifndef NDEBUG
- // Note: LLVM arranges the stack as:
- // Args > Saved RetPC (<--FP) > CSRs > dynamic alignment (<--BP)
- // > "Stack Slots" (<--SP)
- // We can always address StackSlots from RSP. We can usually (unless
- // needsStackRealignment) address CSRs from RSP, but sometimes need to
- // address them from RBP. FixedObjects can be placed anywhere in the stack
- // frame depending on their specific requirements (i.e. we can actually
- // refer to arguments to the function which are stored in the *callers*
- // frame). As a result, THE RESULT OF THIS CALL IS MEANINGLESS FOR CSRs
- // AND FixedObjects IFF needsStackRealignment or hasVarSizedObject.
-
- assert(!TRI->hasBasePointer(MF) && "we don't handle this case");
-
- // We don't handle tail calls, and shouldn't be seeing them
- // either.
+ // LLVM arranges the stack as follows:
+ // ...
+ // ARG2
+ // ARG1
+ // RETADDR
+ // PUSH RBP <-- RBP points here
+ // PUSH CSRs
+ // ~~~~~~~ <-- possible stack realignment (non-win64)
+ // ...
+ // STACK OBJECTS
+ // ... <-- RSP after prologue points here
+ // ~~~~~~~ <-- possible stack realignment (win64)
+ //
+ // if (hasVarSizedObjects()):
+ // ... <-- "base pointer" (ESI/RBX) points here
+ // DYNAMIC ALLOCAS
+ // ... <-- RSP points here
+ //
+ // Case 1: In the simple case of no stack realignment and no dynamic
+ // allocas, both "fixed" stack objects (arguments and CSRs) are addressable
+ // with fixed offsets from RSP.
+ //
+ // Case 2: In the case of stack realignment with no dynamic allocas, fixed
+ // stack objects are addressed with RBP and regular stack objects with RSP.
+ //
+ // Case 3: In the case of dynamic allocas and stack realignment, RSP is used
+ // to address stack arguments for outgoing calls and nothing else. The "base
+ // pointer" points to local variables, and RBP points to fixed objects.
+ //
+ // In cases 2 and 3, we can only answer for non-fixed stack objects, and the
+ // answer we give is relative to the SP after the prologue, and not the
+ // SP in the middle of the function.
+
+ assert((!MFI->isFixedObjectIndex(FI) || !TRI->needsStackRealignment(MF) ||
+ STI.isTargetWin64()) &&
+ "offset from fixed object to SP is not static");
+
+ // We don't handle tail calls, and shouldn't be seeing them either.
int TailCallReturnAddrDelta =
MF.getInfo<X86MachineFunctionInfo>()->getTCReturnAddrDelta();
assert(!(TailCallReturnAddrDelta < 0) && "we don't handle this case!");
.addReg(ScratchReg), PReg, false, SPLimitOffset);
BuildMI(incStackMBB, DL, TII.get(X86::JLE_1)).addMBB(incStackMBB);
- stackCheckMBB->addSuccessor(&PrologueMBB, 99);
- stackCheckMBB->addSuccessor(incStackMBB, 1);
- incStackMBB->addSuccessor(&PrologueMBB, 99);
- incStackMBB->addSuccessor(incStackMBB, 1);
+ stackCheckMBB->addSuccessor(&PrologueMBB, {99, 100});
+ stackCheckMBB->addSuccessor(incStackMBB, {1, 100});
+ incStackMBB->addSuccessor(&PrologueMBB, {99, 100});
+ incStackMBB->addSuccessor(incStackMBB, {1, 100});
}
#ifdef XDEBUG
MF.verify();
unsigned StackAlign = getStackAlignment();
Amount = RoundUpToAlignment(Amount, StackAlign);
+ MachineModuleInfo &MMI = MF.getMMI();
+ const Function *Fn = MF.getFunction();
+ bool WindowsCFI = MF.getTarget().getMCAsmInfo()->usesWindowsCFI();
+ bool DwarfCFI = !WindowsCFI &&
+ (MMI.hasDebugInfo() || Fn->needsUnwindTableEntry());
+
// If we have any exception handlers in this function, and we adjust
- // the SP before calls, we may need to indicate this to the unwinder,
- // using GNU_ARGS_SIZE. Note that this may be necessary
- // even when Amount == 0, because the preceding function may have
- // set a non-0 GNU_ARGS_SIZE.
+ // the SP before calls, we may need to indicate this to the unwinder
+ // using GNU_ARGS_SIZE. Note that this may be necessary even when
+ // Amount == 0, because the preceding function may have set a non-0
+ // GNU_ARGS_SIZE.
// TODO: We don't need to reset this between subsequent functions,
// if it didn't change.
- bool HasDwarfEHHandlers =
- !MF.getTarget().getMCAsmInfo()->usesWindowsCFI() &&
- !MF.getMMI().getLandingPads().empty();
+ bool HasDwarfEHHandlers = !WindowsCFI &&
+ !MF.getMMI().getLandingPads().empty();
- if (HasDwarfEHHandlers && !isDestroy &&
+ if (HasDwarfEHHandlers && !isDestroy &&
MF.getInfo<X86MachineFunctionInfo>()->getHasPushSequences())
- BuildCFI(MBB, I, DL,\r
- MCCFIInstruction::createGnuArgsSize(nullptr, Amount));\r
+ BuildCFI(MBB, I, DL,
+ MCCFIInstruction::createGnuArgsSize(nullptr, Amount));
if (Amount == 0)
return;
// (Pushes of argument for frame setup, callee pops for frame destroy)
Amount -= InternalAmt;
+ // TODO: This is needed only if we require precise CFA.
+ // If this is a callee-pop calling convention, emit a CFA adjust for
+ // the amount the callee popped.
+ if (isDestroy && InternalAmt && DwarfCFI && !hasFP(MF))
+ BuildCFI(MBB, I, DL,
+ MCCFIInstruction::createAdjustCfaOffset(nullptr, -InternalAmt));
+
if (Amount) {
// Add Amount to SP to destroy a frame, and subtract to setup.
int Offset = isDestroy ? Amount : -Amount;
- if (!(MF.getFunction()->optForMinSize() &&
+ if (!(Fn->optForMinSize() &&
adjustStackWithPops(MBB, I, DL, Offset)))
BuildStackAdjustment(MBB, I, DL, Offset, /*InEpilogue=*/false);
}
+ if (DwarfCFI && !hasFP(MF)) {
+ // If we don't have FP, but need to generate unwind information,
+ // we need to set the correct CFA offset after the stack adjustment.
+ // How much we adjust the CFA offset depends on whether we're emitting
+ // CFI only for EH purposes or for debugging. EH only requires the CFA
+ // offset to be correct at each call site, while for debugging we want
+ // it to be more precise.
+ int CFAOffset = Amount;
+ // TODO: When not using precise CFA, we also need to adjust for the
+ // InternalAmt here.
+
+ if (CFAOffset) {
+ CFAOffset = isDestroy ? -CFAOffset : CFAOffset;
+ BuildCFI(MBB, I, DL,
+ MCCFIInstruction::createAdjustCfaOffset(nullptr, CFAOffset));
+ }
+ }
+
return;
}
bool X86FrameLowering::canUseAsEpilogue(const MachineBasicBlock &MBB) const {
assert(MBB.getParent() && "Block is not attached to a function!");
+ // Win64 has strict requirements in terms of epilogue and we are
+ // not taking a chance at messing with them.
+ // I.e., unless this block is already an exit block, we can't use
+ // it as an epilogue.
+ if (STI.isTargetWin64() && !MBB.succ_empty() && !MBB.isReturnBlock())
+ return false;
+
if (canUseLEAForSPInEpilogue(*MBB.getParent()))
return true;
// If we cannot use LEA to adjust SP, we may need to use ADD, which
- // clobbers the EFLAGS. Check that none of the terminators reads the
- // EFLAGS, and if one uses it, conservatively assume this is not
+ // clobbers the EFLAGS. Check that we do not need to preserve it,
+ // otherwise, conservatively assume this is not
// safe to insert the epilogue here.
- return !terminatorsNeedFlagsAsInput(MBB);
+ return !flagsNeedToBePreservedBeforeTheTerminators(MBB);
+}
+
+bool X86FrameLowering::enableShrinkWrapping(const MachineFunction &MF) const {
+ // If we may need to emit frameless compact unwind information, give
+ // up as this is currently broken: PR25614.
+ return MF.getFunction()->hasFnAttribute(Attribute::NoUnwind) || hasFP(MF);
}
MachineBasicBlock::iterator X86FrameLowering::restoreWin32EHStackPointers(
MachineFunction &MF = *MBB.getParent();
unsigned FramePtr = TRI->getFrameRegister(MF);
unsigned BasePtr = TRI->getBaseRegister();
- MachineModuleInfo &MMI = MF.getMMI();
- const Function *Fn = MF.getFunction();
- WinEHFuncInfo &FuncInfo = MMI.getWinEHFuncInfo(Fn);
+ WinEHFuncInfo &FuncInfo = *MF.getWinEHFuncInfo();
X86MachineFunctionInfo *X86FI = MF.getInfo<X86MachineFunctionInfo>();
MachineFrameInfo *MFI = MF.getFrameInfo();
}
return MBBI;
}
+
+unsigned X86FrameLowering::getWinEHParentFrameOffset(const MachineFunction &MF) const {
+ // RDX, the parent frame pointer, is homed into 16(%rsp) in the prologue.
+ unsigned Offset = 16;
+ // RBP is immediately pushed.
+ Offset += SlotSize;
+ // All callee-saved registers are then pushed.
+ Offset += MF.getInfo<X86MachineFunctionInfo>()->getCalleeSavedFrameSize();
+ // Every funclet allocates enough stack space for the largest outgoing call.
+ Offset += getWinEHFuncletFrameSize(MF);
+ return Offset;
+}
+
+void X86FrameLowering::processFunctionBeforeFrameFinalized(
+ MachineFunction &MF, RegScavenger *RS) const {
+ // If this function isn't doing Win64-style C++ EH, we don't need to do
+ // anything.
+ const Function *Fn = MF.getFunction();
+ if (!STI.is64Bit() || !MF.getMMI().hasEHFunclets() ||
+ classifyEHPersonality(Fn->getPersonalityFn()) != EHPersonality::MSVC_CXX)
+ return;
+
+ // Win64 C++ EH needs to allocate the UnwindHelp object at some fixed offset
+ // relative to RSP after the prologue. Find the offset of the last fixed
+ // object, so that we can allocate a slot immediately following it. If there
+ // were no fixed objects, use offset -SlotSize, which is immediately after the
+ // return address. Fixed objects have negative frame indices.
+ MachineFrameInfo *MFI = MF.getFrameInfo();
+ int64_t MinFixedObjOffset = -SlotSize;
+ for (int I = MFI->getObjectIndexBegin(); I < 0; ++I)
+ MinFixedObjOffset = std::min(MinFixedObjOffset, MFI->getObjectOffset(I));
+
+ int64_t UnwindHelpOffset = MinFixedObjOffset - SlotSize;
+ int UnwindHelpFI =
+ MFI->CreateFixedObject(SlotSize, UnwindHelpOffset, /*Immutable=*/false);
+ MF.getWinEHFuncInfo()->UnwindHelpFrameIdx = UnwindHelpFI;
+
+ // Store -2 into UnwindHelp on function entry. We have to scan forwards past
+ // other frame setup instructions.
+ MachineBasicBlock &MBB = MF.front();
+ auto MBBI = MBB.begin();
+ while (MBBI != MBB.end() && MBBI->getFlag(MachineInstr::FrameSetup))
+ ++MBBI;
+
+ DebugLoc DL = MBB.findDebugLoc(MBBI);
+ addFrameReference(BuildMI(MBB, MBBI, DL, TII.get(X86::MOV64mi32)),
+ UnwindHelpFI)
+ .addImm(-2);
+}
projects / oota-llvm.git / blobdiff