// Avoid emitting unnecessary branches to the next block.
if (MBB != NextBlock(SwitchBB))
- BrRange = DAG.getNode(ISD::BR, getCurSDLoc(), MVT::Other, BrRange,
+ BrRange = DAG.getNode(ISD::BR, getCurSDLoc(), MVT::Other, CopyTo,
DAG.getBasicBlock(MBB));
DAG.setRoot(BrRange);
return VReg;
}
-void SelectionDAGBuilder::sortAndRangeify(CaseClusterVector &Clusters) {
-#ifndef NDEBUG
- for (const CaseCluster &CC : Clusters)
- assert(CC.Low == CC.High && "Input clusters must be single-case");
-#endif
+/// handleSmallSwitchCaseRange - Emit a series of specific tests (suitable for
+/// small case ranges).
+bool SelectionDAGBuilder::handleSmallSwitchRange(CaseRec& CR,
+ CaseRecVector& WorkList,
+ const Value* SV,
+ MachineBasicBlock *Default,
+ MachineBasicBlock *SwitchBB) {
+ // Size is the number of Cases represented by this range.
+ size_t Size = CR.Range.second - CR.Range.first;
+ if (Size > 3)
+ return false;
- std::sort(Clusters.begin(), Clusters.end(),
- [](const CaseCluster &a, const CaseCluster &b) {
- return a.Low->getValue().slt(b.Low->getValue());
- });
+ // Get the MachineFunction which holds the current MBB. This is used when
+ // inserting any additional MBBs necessary to represent the switch.
+ MachineFunction *CurMF = FuncInfo.MF;
+
+ // Figure out which block is immediately after the current one.
+ MachineBasicBlock *NextMBB = nullptr;
+ MachineFunction::iterator BBI = CR.CaseBB;
+ if (++BBI != FuncInfo.MF->end())
+ NextMBB = BBI;
+
+ BranchProbabilityInfo *BPI = FuncInfo.BPI;
+ // If any two of the cases has the same destination, and if one value
+ // is the same as the other, but has one bit unset that the other has set,
+ // use bit manipulation to do two compares at once. For example:
+ // "if (X == 6 || X == 4)" -> "if ((X|2) == 6)"
+ // TODO: This could be extended to merge any 2 cases in switches with 3 cases.
+ // TODO: Handle cases where CR.CaseBB != SwitchBB.
+ if (Size == 2 && CR.CaseBB == SwitchBB) {
+ Case &Small = *CR.Range.first;
+ Case &Big = *(CR.Range.second-1);
+
+ if (Small.Low == Small.High && Big.Low == Big.High && Small.BB == Big.BB) {
+ const APInt& SmallValue = Small.Low->getValue();
+ const APInt& BigValue = Big.Low->getValue();
+
+ // Check that there is only one bit different.
+ if (BigValue.countPopulation() == SmallValue.countPopulation() + 1 &&
+ (SmallValue | BigValue) == BigValue) {
+ // Isolate the common bit.
+ APInt CommonBit = BigValue & ~SmallValue;
+ assert((SmallValue | CommonBit) == BigValue &&
+ CommonBit.countPopulation() == 1 && "Not a common bit?");
+
+ SDValue CondLHS = getValue(SV);
+ EVT VT = CondLHS.getValueType();
+ SDLoc DL = getCurSDLoc();
+
+ SDValue Or = DAG.getNode(ISD::OR, DL, VT, CondLHS,
+ DAG.getConstant(CommonBit, VT));
+ SDValue Cond = DAG.getSetCC(DL, MVT::i1,
+ Or, DAG.getConstant(BigValue, VT),
+ ISD::SETEQ);
+
+ // Update successor info.
+ // Both Small and Big will jump to Small.BB, so we sum up the weights.
+ addSuccessorWithWeight(SwitchBB, Small.BB,
+ Small.ExtraWeight + Big.ExtraWeight);
+ addSuccessorWithWeight(SwitchBB, Default,
+ // The default destination is the first successor in IR.
+ BPI ? BPI->getEdgeWeight(SwitchBB->getBasicBlock(), (unsigned)0) : 0);
- // Merge adjacent clusters with the same destination.
- const unsigned N = Clusters.size();
- unsigned DstIndex = 0;
- for (unsigned SrcIndex = 0; SrcIndex < N; ++SrcIndex) {
- CaseCluster &CC = Clusters[SrcIndex];
- const ConstantInt *CaseVal = CC.Low;
- MachineBasicBlock *Succ = CC.MBB;
+ // Insert the true branch.
+ SDValue BrCond = DAG.getNode(ISD::BRCOND, DL, MVT::Other,
+ getControlRoot(), Cond,
+ DAG.getBasicBlock(Small.BB));
+
+ // Insert the false branch.
+ BrCond = DAG.getNode(ISD::BR, DL, MVT::Other, BrCond,
+ DAG.getBasicBlock(Default));
+
+ DAG.setRoot(BrCond);
+ return true;
+ }
+ }
+ }
+
+ // Order cases by weight so the most likely case will be checked first.
+ uint32_t UnhandledWeights = 0;
+ if (BPI) {
+ for (CaseItr I = CR.Range.first, IE = CR.Range.second; I != IE; ++I) {
+ uint32_t IWeight = I->ExtraWeight;
+ UnhandledWeights += IWeight;
+ for (CaseItr J = CR.Range.first; J < I; ++J) {
+ uint32_t JWeight = J->ExtraWeight;
+ if (IWeight > JWeight)
+ std::swap(*I, *J);
+ }
+ }
+ }
+ // Rearrange the case blocks so that the last one falls through if possible.
+ Case &BackCase = *(CR.Range.second-1);
+ if (Size > 1 && NextMBB && Default != NextMBB && BackCase.BB != NextMBB) {
+ // The last case block won't fall through into 'NextMBB' if we emit the
+ // branches in this order. See if rearranging a case value would help.
+ // We start at the bottom as it's the case with the least weight.
+ for (Case *I = &*(CR.Range.second-2), *E = &*CR.Range.first-1; I != E; --I)
+ if (I->BB == NextMBB) {
+ std::swap(*I, BackCase);
+ break;
+ }
+ }
+
+ // Create a CaseBlock record representing a conditional branch to
+ // the Case's target mbb if the value being switched on SV is equal
+ // to C.
+ MachineBasicBlock *CurBlock = CR.CaseBB;
+ for (CaseItr I = CR.Range.first, E = CR.Range.second; I != E; ++I) {
+ MachineBasicBlock *FallThrough;
+ if (I != E-1) {
+ FallThrough = CurMF->CreateMachineBasicBlock(CurBlock->getBasicBlock());
+ CurMF->insert(BBI, FallThrough);
+
+ // Put SV in a virtual register to make it available from the new blocks.
+ ExportFromCurrentBlock(SV);
+ } else {
+ // If the last case doesn't match, go to the default block.
+ FallThrough = Default;
+ }
+
+ const Value *RHS, *LHS, *MHS;
+ ISD::CondCode CC;
+ if (I->High == I->Low) {
+ // This is just small small case range :) containing exactly 1 case
+ CC = ISD::SETEQ;
+ LHS = SV; RHS = I->High; MHS = nullptr;
+ } else {
+ CC = ISD::SETLE;
+ LHS = I->Low; MHS = SV; RHS = I->High;
+ }
+
+ // The false weight should be sum of all un-handled cases.
+ UnhandledWeights -= I->ExtraWeight;
+ CaseBlock CB(CC, LHS, RHS, MHS, /* truebb */ I->BB, /* falsebb */ FallThrough,
+ /* me */ CurBlock,
+ /* trueweight */ I->ExtraWeight,
+ /* falseweight */ UnhandledWeights);
+
+ // If emitting the first comparison, just call visitSwitchCase to emit the
+ // code into the current block. Otherwise, push the CaseBlock onto the
+ // vector to be later processed by SDISel, and insert the node's MBB
+ // before the next MBB.
+ if (CurBlock == SwitchBB)
+ visitSwitchCase(CB, SwitchBB);
+ else
+ SwitchCases.push_back(CB);
- if (DstIndex != 0 && Clusters[DstIndex - 1].MBB == Succ &&
- (CaseVal->getValue() - Clusters[DstIndex - 1].High->getValue()) == 1) {
+ CurBlock = FallThrough;
+ }
+
+ return true;
+}
+
+static inline bool areJTsAllowed(const TargetLowering &TLI) {
+ return TLI.isOperationLegalOrCustom(ISD::BR_JT, MVT::Other) ||
+ TLI.isOperationLegalOrCustom(ISD::BRIND, MVT::Other);
+}
+
+static APInt ComputeRange(const APInt &First, const APInt &Last) {
+ uint32_t BitWidth = std::max(Last.getBitWidth(), First.getBitWidth()) + 1;
+ APInt LastExt = Last.sext(BitWidth), FirstExt = First.sext(BitWidth);
+ return (LastExt - FirstExt + 1ULL);
+}
+
+/// handleJTSwitchCase - Emit jumptable for current switch case range
+bool SelectionDAGBuilder::handleJTSwitchCase(CaseRec &CR,
+ CaseRecVector &WorkList,
+ const Value *SV,
+ MachineBasicBlock *Default,
+ MachineBasicBlock *SwitchBB) {
+ Case& FrontCase = *CR.Range.first;
+ Case& BackCase = *(CR.Range.second-1);
+
+ const APInt &First = FrontCase.Low->getValue();
+ const APInt &Last = BackCase.High->getValue();
+
+ APInt TSize(First.getBitWidth(), 0);
+ for (CaseItr I = CR.Range.first, E = CR.Range.second; I != E; ++I)
+ TSize += I->size();
+
+ const TargetLowering &TLI = DAG.getTargetLoweringInfo();
+ if (!areJTsAllowed(TLI) || TSize.ult(TLI.getMinimumJumpTableEntries()))
+ return false;
+
+ APInt Range = ComputeRange(First, Last);
+ // The density is TSize / Range. Require at least 40%.
+ // It should not be possible for IntTSize to saturate for sane code, but make
+ // sure we handle Range saturation correctly.
+ uint64_t IntRange = Range.getLimitedValue(UINT64_MAX/10);
+ uint64_t IntTSize = TSize.getLimitedValue(UINT64_MAX/10);
+ if (IntTSize * 10 < IntRange * 4)
+ return false;
+
+ DEBUG(dbgs() << "Lowering jump table\n"
+ << "First entry: " << First << ". Last entry: " << Last << '\n'
+ << "Range: " << Range << ". Size: " << TSize << ".\n\n");
+
+ // Get the MachineFunction which holds the current MBB. This is used when
+ // inserting any additional MBBs necessary to represent the switch.
+ MachineFunction *CurMF = FuncInfo.MF;
+
+ // Figure out which block is immediately after the current one.
+ MachineFunction::iterator BBI = CR.CaseBB;
+ ++BBI;
+
+ const BasicBlock *LLVMBB = CR.CaseBB->getBasicBlock();
+
+ // Create a new basic block to hold the code for loading the address
+ // of the jump table, and jumping to it. Update successor information;
+ // we will either branch to the default case for the switch, or the jump
+ // table.
+ MachineBasicBlock *JumpTableBB = CurMF->CreateMachineBasicBlock(LLVMBB);
+ CurMF->insert(BBI, JumpTableBB);
+
+ addSuccessorWithWeight(CR.CaseBB, Default);
+ addSuccessorWithWeight(CR.CaseBB, JumpTableBB);
+
+ // Build a vector of destination BBs, corresponding to each target
+ // of the jump table. If the value of the jump table slot corresponds to
+ // a case statement, push the case's BB onto the vector, otherwise, push
+ // the default BB.
+ std::vector<MachineBasicBlock*> DestBBs;
+ APInt TEI = First;
+ for (CaseItr I = CR.Range.first, E = CR.Range.second; I != E; ++TEI) {
+ const APInt &Low = I->Low->getValue();
+ const APInt &High = I->High->getValue();
+
+ if (Low.sle(TEI) && TEI.sle(High)) {
+ DestBBs.push_back(I->BB);
+ if (TEI==High)
+ ++I;
+ } else {
+ DestBBs.push_back(Default);
+ }
+ }
+
+ // Calculate weight for each unique destination in CR.
+ DenseMap<MachineBasicBlock*, uint32_t> DestWeights;
+ if (FuncInfo.BPI) {
+ for (CaseItr I = CR.Range.first, E = CR.Range.second; I != E; ++I)
+ DestWeights[I->BB] += I->ExtraWeight;
+ }
+
+ // Update successor info. Add one edge to each unique successor.
+ BitVector SuccsHandled(CR.CaseBB->getParent()->getNumBlockIDs());
+ for (MachineBasicBlock *DestBB : DestBBs) {
+ if (!SuccsHandled[DestBB->getNumber()]) {
+ SuccsHandled[DestBB->getNumber()] = true;
+ auto I = DestWeights.find(DestBB);
+ addSuccessorWithWeight(JumpTableBB, DestBB,
+ I != DestWeights.end() ? I->second : 0);
+ }
+ }
+
+ // Create a jump table index for this jump table.
+ unsigned JTEncoding = TLI.getJumpTableEncoding();
+ unsigned JTI = CurMF->getOrCreateJumpTableInfo(JTEncoding)
+ ->createJumpTableIndex(DestBBs);
+
+ // Set the jump table information so that we can codegen it as a second
+ // MachineBasicBlock
+ JumpTable JT(-1U, JTI, JumpTableBB, Default);
+ JumpTableHeader JTH(First, Last, SV, CR.CaseBB, (CR.CaseBB == SwitchBB));
+ if (CR.CaseBB == SwitchBB)
+ visitJumpTableHeader(JT, JTH, SwitchBB);
+
+ JTCases.push_back(JumpTableBlock(JTH, JT));
+ return true;
+}
+
+/// handleBTSplitSwitchCase - emit comparison and split binary search tree into
+/// 2 subtrees.
+bool SelectionDAGBuilder::handleBTSplitSwitchCase(CaseRec& CR,
+ CaseRecVector& WorkList,
+ const Value* SV,
+ MachineBasicBlock* SwitchBB) {
+ Case& FrontCase = *CR.Range.first;
+ Case& BackCase = *(CR.Range.second-1);
+
+ // Size is the number of Cases represented by this range.
+ unsigned Size = CR.Range.second - CR.Range.first;
+
+ const APInt &First = FrontCase.Low->getValue();
+ const APInt &Last = BackCase.High->getValue();
+ double FMetric = 0;
+ CaseItr Pivot = CR.Range.first + Size/2;
+
+ // Select optimal pivot, maximizing sum density of LHS and RHS. This will
+ // (heuristically) allow us to emit JumpTable's later.
+ APInt TSize(First.getBitWidth(), 0);
+ for (CaseItr I = CR.Range.first, E = CR.Range.second;
+ I!=E; ++I)
+ TSize += I->size();
+
+ APInt LSize = FrontCase.size();
+ APInt RSize = TSize-LSize;
+ DEBUG(dbgs() << "Selecting best pivot: \n"
+ << "First: " << First << ", Last: " << Last <<'\n'
+ << "LSize: " << LSize << ", RSize: " << RSize << '\n');
+ const TargetLowering &TLI = DAG.getTargetLoweringInfo();
+ for (CaseItr I = CR.Range.first, J=I+1, E = CR.Range.second;
+ J!=E; ++I, ++J) {
+ const APInt &LEnd = I->High->getValue();
+ const APInt &RBegin = J->Low->getValue();
+ APInt Range = ComputeRange(LEnd, RBegin);
+ assert((Range - 2ULL).isNonNegative() &&
+ "Invalid case distance");
+ // Use volatile double here to avoid excess precision issues on some hosts,
+ // e.g. that use 80-bit X87 registers.
+ // Only consider the density of sub-ranges that actually have sufficient
+ // entries to be lowered as a jump table.
+ volatile double LDensity =
+ LSize.ult(TLI.getMinimumJumpTableEntries())
+ ? 0.0
+ : LSize.roundToDouble() / (LEnd - First + 1ULL).roundToDouble();
+ volatile double RDensity =
+ RSize.ult(TLI.getMinimumJumpTableEntries())
+ ? 0.0
+ : RSize.roundToDouble() / (Last - RBegin + 1ULL).roundToDouble();
+ volatile double Metric = Range.logBase2() * (LDensity + RDensity);
+ // Should always split in some non-trivial place
+ DEBUG(dbgs() <<"=>Step\n"
+ << "LEnd: " << LEnd << ", RBegin: " << RBegin << '\n'
+ << "LDensity: " << LDensity
+ << ", RDensity: " << RDensity << '\n'
+ << "Metric: " << Metric << '\n');
+ if (FMetric < Metric) {
+ Pivot = J;
+ FMetric = Metric;
+ DEBUG(dbgs() << "Current metric set to: " << FMetric << '\n');
+ }
+
+ LSize += J->size();
+ RSize -= J->size();
+ }
+
+ if (FMetric == 0 || !areJTsAllowed(TLI))
+ Pivot = CR.Range.first + Size/2;
+ splitSwitchCase(CR, Pivot, WorkList, SV, SwitchBB);
+ return true;
+}
+
+void SelectionDAGBuilder::splitSwitchCase(CaseRec &CR, CaseItr Pivot,
+ CaseRecVector &WorkList,
+ const Value *SV,
+ MachineBasicBlock *SwitchBB) {
+ // Get the MachineFunction which holds the current MBB. This is used when
+ // inserting any additional MBBs necessary to represent the switch.
+ MachineFunction *CurMF = FuncInfo.MF;
+
+ // Figure out which block is immediately after the current one.
+ MachineFunction::iterator BBI = CR.CaseBB;
+ ++BBI;
+
+ const BasicBlock *LLVMBB = CR.CaseBB->getBasicBlock();
+
+ CaseRange LHSR(CR.Range.first, Pivot);
+ CaseRange RHSR(Pivot, CR.Range.second);
+ const ConstantInt *C = Pivot->Low;
+ MachineBasicBlock *FalseBB = nullptr, *TrueBB = nullptr;
+
+ // We know that we branch to the LHS if the Value being switched on is
+ // less than the Pivot value, C. We use this to optimize our binary
+ // tree a bit, by recognizing that if SV is greater than or equal to the
+ // LHS's Case Value, and that Case Value is exactly one less than the
+ // Pivot's Value, then we can branch directly to the LHS's Target,
+ // rather than creating a leaf node for it.
+ if ((LHSR.second - LHSR.first) == 1 && LHSR.first->High == CR.GE &&
+ C->getValue() == (CR.GE->getValue() + 1LL)) {
+ TrueBB = LHSR.first->BB;
+ } else {
+ TrueBB = CurMF->CreateMachineBasicBlock(LLVMBB);
+ CurMF->insert(BBI, TrueBB);
+ WorkList.push_back(CaseRec(TrueBB, C, CR.GE, LHSR));
+
+ // Put SV in a virtual register to make it available from the new blocks.
+ ExportFromCurrentBlock(SV);
+ }
+
+ // Similar to the optimization above, if the Value being switched on is
+ // known to be less than the Constant CR.LT, and the current Case Value
+ // is CR.LT - 1, then we can branch directly to the target block for
+ // the current Case Value, rather than emitting a RHS leaf node for it.
+ if ((RHSR.second - RHSR.first) == 1 && CR.LT &&
+ RHSR.first->Low->getValue() == (CR.LT->getValue() - 1LL)) {
+ FalseBB = RHSR.first->BB;
+ } else {
+ FalseBB = CurMF->CreateMachineBasicBlock(LLVMBB);
+ CurMF->insert(BBI, FalseBB);
+ WorkList.push_back(CaseRec(FalseBB, CR.LT, C, RHSR));
+
+ // Put SV in a virtual register to make it available from the new blocks.
+ ExportFromCurrentBlock(SV);
+ }
+
+ // Create a CaseBlock record representing a conditional branch to
+ // the LHS node if the value being switched on SV is less than C.
+ // Otherwise, branch to LHS.
+ CaseBlock CB(ISD::SETLT, SV, C, nullptr, TrueBB, FalseBB, CR.CaseBB);
+
+ if (CR.CaseBB == SwitchBB)
+ visitSwitchCase(CB, SwitchBB);
+ else
+ SwitchCases.push_back(CB);
+}
+
+/// handleBitTestsSwitchCase - if current case range has few destination and
+/// range span less, than machine word bitwidth, encode case range into series
+/// of masks and emit bit tests with these masks.
+bool SelectionDAGBuilder::handleBitTestsSwitchCase(CaseRec& CR,
+ CaseRecVector& WorkList,
+ const Value* SV,
+ MachineBasicBlock* Default,
+ MachineBasicBlock* SwitchBB) {
+ const TargetLowering &TLI = DAG.getTargetLoweringInfo();
+ EVT PTy = TLI.getPointerTy();
+ unsigned IntPtrBits = PTy.getSizeInBits();
+
+ Case& FrontCase = *CR.Range.first;
+ Case& BackCase = *(CR.Range.second-1);
+
+ // Get the MachineFunction which holds the current MBB. This is used when
+ // inserting any additional MBBs necessary to represent the switch.
+ MachineFunction *CurMF = FuncInfo.MF;
+
+ // If target does not have legal shift left, do not emit bit tests at all.
+ if (!TLI.isOperationLegal(ISD::SHL, PTy))
+ return false;
+
+ size_t numCmps = 0;
+ for (CaseItr I = CR.Range.first, E = CR.Range.second; I != E; ++I) {
+ // Single case counts one, case range - two.
+ numCmps += (I->Low == I->High ? 1 : 2);
+ }
+
+ // Count unique destinations
+ SmallSet<MachineBasicBlock*, 4> Dests;
+ for (CaseItr I = CR.Range.first, E = CR.Range.second; I != E; ++I) {
+ Dests.insert(I->BB);
+ if (Dests.size() > 3)
+ // Don't bother the code below, if there are too much unique destinations
+ return false;
+ }
+ DEBUG(dbgs() << "Total number of unique destinations: "
+ << Dests.size() << '\n'
+ << "Total number of comparisons: " << numCmps << '\n');
+
+ // Compute span of values.
+ const APInt& minValue = FrontCase.Low->getValue();
+ const APInt& maxValue = BackCase.High->getValue();
+ APInt cmpRange = maxValue - minValue;
+
+ DEBUG(dbgs() << "Compare range: " << cmpRange << '\n'
+ << "Low bound: " << minValue << '\n'
+ << "High bound: " << maxValue << '\n');
+
+ if (cmpRange.uge(IntPtrBits) ||
+ (!(Dests.size() == 1 && numCmps >= 3) &&
+ !(Dests.size() == 2 && numCmps >= 5) &&
+ !(Dests.size() >= 3 && numCmps >= 6)))
+ return false;
+
+ DEBUG(dbgs() << "Emitting bit tests\n");
+ APInt lowBound = APInt::getNullValue(cmpRange.getBitWidth());
+
+ // Optimize the case where all the case values fit in a
+ // word without having to subtract minValue. In this case,
+ // we can optimize away the subtraction.
+ if (minValue.isNonNegative() && maxValue.slt(IntPtrBits)) {
+ cmpRange = maxValue;
+ } else {
+ lowBound = minValue;
+ }
+
+ CaseBitsVector CasesBits;
+ unsigned i, count = 0;
+
+ for (CaseItr I = CR.Range.first, E = CR.Range.second; I!=E; ++I) {
+ MachineBasicBlock* Dest = I->BB;
+ for (i = 0; i < count; ++i)
+ if (Dest == CasesBits[i].BB)
+ break;
+
+ if (i == count) {
+ assert((count < 3) && "Too much destinations to test!");
+ CasesBits.push_back(CaseBits(0, Dest, 0, 0/*Weight*/));
+ count++;
+ }
+
+ const APInt& lowValue = I->Low->getValue();
+ const APInt& highValue = I->High->getValue();
+
+ uint64_t lo = (lowValue - lowBound).getZExtValue();
+ uint64_t hi = (highValue - lowBound).getZExtValue();
+ CasesBits[i].ExtraWeight += I->ExtraWeight;
+
+ for (uint64_t j = lo; j <= hi; j++) {
+ CasesBits[i].Mask |= 1ULL << j;
+ CasesBits[i].Bits++;
+ }
+
+ }
+ std::sort(CasesBits.begin(), CasesBits.end(), CaseBitsCmp());
+
+ BitTestInfo BTC;
+
+ // Figure out which block is immediately after the current one.
+ MachineFunction::iterator BBI = CR.CaseBB;
+ ++BBI;
+
+ const BasicBlock *LLVMBB = CR.CaseBB->getBasicBlock();
+
+ DEBUG(dbgs() << "Cases:\n");
+ for (unsigned i = 0, e = CasesBits.size(); i!=e; ++i) {
+ DEBUG(dbgs() << "Mask: " << CasesBits[i].Mask
+ << ", Bits: " << CasesBits[i].Bits
+ << ", BB: " << CasesBits[i].BB << '\n');
+
+ MachineBasicBlock *CaseBB = CurMF->CreateMachineBasicBlock(LLVMBB);
+ CurMF->insert(BBI, CaseBB);
+ BTC.push_back(BitTestCase(CasesBits[i].Mask,
+ CaseBB,
+ CasesBits[i].BB, CasesBits[i].ExtraWeight));
+
+ // Put SV in a virtual register to make it available from the new blocks.
+ ExportFromCurrentBlock(SV);
+ }
+
+ BitTestBlock BTB(lowBound, cmpRange, SV,
+ -1U, MVT::Other, (CR.CaseBB == SwitchBB),
+ CR.CaseBB, Default, std::move(BTC));
+
+ if (CR.CaseBB == SwitchBB)
+ visitBitTestHeader(BTB, SwitchBB);
+
+ BitTestCases.push_back(std::move(BTB));
+
+ return true;
+}
+
+void SelectionDAGBuilder::Clusterify(CaseVector &Cases, const SwitchInst *SI) {
+ BranchProbabilityInfo *BPI = FuncInfo.BPI;
+
+ // Extract cases from the switch and sort them.
+ typedef std::pair<const ConstantInt*, unsigned> CasePair;
+ std::vector<CasePair> Sorted;
+ Sorted.reserve(SI->getNumCases());
+ for (auto I : SI->cases())
+ Sorted.push_back(std::make_pair(I.getCaseValue(), I.getSuccessorIndex()));
+ std::sort(Sorted.begin(), Sorted.end(), [](CasePair a, CasePair b) {
+ return a.first->getValue().slt(b.first->getValue());
+ });
+
+ // Merge adjacent cases with the same destination, build Cases vector.
+ assert(Cases.empty() && "Cases should be empty before Clusterify;");
+ Cases.reserve(SI->getNumCases());
+ MachineBasicBlock *PreviousSucc = nullptr;
+ for (CasePair &CP : Sorted) {
+ const ConstantInt *CaseVal = CP.first;
+ unsigned SuccIndex = CP.second;
+ MachineBasicBlock *Succ = FuncInfo.MBBMap[SI->getSuccessor(SuccIndex)];
+ uint32_t Weight = BPI ? BPI->getEdgeWeight(SI->getParent(), SuccIndex) : 0;
+
+ if (PreviousSucc == Succ &&
+ (CaseVal->getValue() - Cases.back().High->getValue()) == 1) {
// If this case has the same successor and is a neighbour, merge it into
// the previous cluster.
- Clusters[DstIndex - 1].High = CaseVal;
- Clusters[DstIndex - 1].Weight += CC.Weight;
+ Cases.back().High = CaseVal;
+ Cases.back().ExtraWeight += Weight;
} else {
- std::memmove(&Clusters[DstIndex++], &Clusters[SrcIndex],
- sizeof(Clusters[SrcIndex]));
+ Cases.push_back(Case(CaseVal, CaseVal, Succ, Weight));
}
+
+ PreviousSucc = Succ;
}
- Clusters.resize(DstIndex);
+
+ DEBUG({
+ size_t numCmps = 0;
+ for (auto &I : Cases)
+ // A range counts double, since it requires two compares.
+ numCmps += I.Low != I.High ? 2 : 1;
+
+ dbgs() << "Clusterify finished. Total clusters: " << Cases.size()
+ << ". Total compares: " << numCmps << '\n';
+ });
}
void SelectionDAGBuilder::UpdateSplitBlock(MachineBasicBlock *First,
BitTestCases[i].Parent = Last;
}
+void SelectionDAGBuilder::visitSwitch(const SwitchInst &SI) {
+ MachineBasicBlock *SwitchMBB = FuncInfo.MBB;
+
+ // Create a vector of Cases, sorted so that we can efficiently create a binary
+ // search tree from them.
+ CaseVector Cases;
+ Clusterify(Cases, &SI);
+
+ // Get the default destination MBB.
+ MachineBasicBlock *Default = FuncInfo.MBBMap[SI.getDefaultDest()];
+
+ if (isa<UnreachableInst>(SI.getDefaultDest()->getFirstNonPHIOrDbg()) &&
+ !Cases.empty()) {
+ // Replace an unreachable default destination with the most popular case
+ // destination.
+ DenseMap<const BasicBlock *, unsigned> Popularity;
+ unsigned MaxPop = 0;
+ const BasicBlock *MaxBB = nullptr;
+ for (auto I : SI.cases()) {
+ const BasicBlock *BB = I.getCaseSuccessor();
+ if (++Popularity[BB] > MaxPop) {
+ MaxPop = Popularity[BB];
+ MaxBB = BB;
+ }
+ }
+
+ // Set new default.
+ assert(MaxPop > 0);
+ assert(MaxBB);
+ Default = FuncInfo.MBBMap[MaxBB];
+
+ // Remove cases that were pointing to the destination that is now the default.
+ Cases.erase(std::remove_if(Cases.begin(), Cases.end(),
+ [&](const Case &C) { return C.BB == Default; }),
+ Cases.end());
+ }
+
+ // If there is only the default destination, go there directly.
+ if (Cases.empty()) {
+ // Update machine-CFG edges.
+ SwitchMBB->addSuccessor(Default);
+
+ // If this is not a fall-through branch, emit the branch.
+ if (Default != NextBlock(SwitchMBB)) {
+ DAG.setRoot(DAG.getNode(ISD::BR, getCurSDLoc(), MVT::Other,
+ getControlRoot(), DAG.getBasicBlock(Default)));
+ }
+ return;
+ }
+
+ // Get the Value to be switched on.
+ const Value *SV = SI.getCondition();
+
+ // Push the initial CaseRec onto the worklist
+ CaseRecVector WorkList;
+ WorkList.push_back(CaseRec(SwitchMBB,nullptr,nullptr,
+ CaseRange(Cases.begin(),Cases.end())));
+
+ while (!WorkList.empty()) {
+ // Grab a record representing a case range to process off the worklist
+ CaseRec CR = WorkList.back();
+ WorkList.pop_back();
+
+ if (handleBitTestsSwitchCase(CR, WorkList, SV, Default, SwitchMBB))
+ continue;
+
+ // If the range has few cases (two or less) emit a series of specific
+ // tests.
+ if (handleSmallSwitchRange(CR, WorkList, SV, Default, SwitchMBB))
+ continue;
+
+ // If the switch has more than N blocks, and is at least 40% dense, and the
+ // target supports indirect branches, then emit a jump table rather than
+ // lowering the switch to a binary tree of conditional branches.
+ // N defaults to 4 and is controlled via TLS.getMinimumJumpTableEntries().
+ if (handleJTSwitchCase(CR, WorkList, SV, Default, SwitchMBB))
+ continue;
+
+ // Emit binary tree. We need to pick a pivot, and push left and right ranges
+ // onto the worklist. Leafs are handled via handleSmallSwitchRange() call.
+ handleBTSplitSwitchCase(CR, WorkList, SV, SwitchMBB);
+ }
+}
+
void SelectionDAGBuilder::visitIndirectBr(const IndirectBrInst &I) {
MachineBasicBlock *IndirectBrMBB = FuncInfo.MBB;
HasTailCall = true;
}
-bool SelectionDAGBuilder::isDense(const CaseClusterVector &Clusters,
- unsigned *TotalCases, unsigned First,
- unsigned Last) {
- assert(Last >= First);
- assert(TotalCases[Last] >= TotalCases[First]);
-
- APInt LowCase = Clusters[First].Low->getValue();
- APInt HighCase = Clusters[Last].High->getValue();
- assert(LowCase.getBitWidth() == HighCase.getBitWidth());
-
- // FIXME: A range of consecutive cases has 100% density, but only requires one
- // comparison to lower. We should discriminate against such consecutive ranges
- // in jump tables.
-
- uint64_t Diff = (HighCase - LowCase).getLimitedValue((UINT64_MAX - 1) / 100);
- uint64_t Range = Diff + 1;
-
- uint64_t NumCases =
- TotalCases[Last] - (First == 0 ? 0 : TotalCases[First - 1]);
-
- assert(NumCases < UINT64_MAX / 100);
- assert(Range >= NumCases);
-
- return NumCases * 100 >= Range * MinJumpTableDensity;
-}
-
-static inline bool areJTsAllowed(const TargetLowering &TLI) {
- return TLI.isOperationLegalOrCustom(ISD::BR_JT, MVT::Other) ||
- TLI.isOperationLegalOrCustom(ISD::BRIND, MVT::Other);
-}
-
-bool SelectionDAGBuilder::buildJumpTable(CaseClusterVector &Clusters,
- unsigned First, unsigned Last,
- const SwitchInst *SI,
- MachineBasicBlock *DefaultMBB,
- CaseCluster &JTCluster) {
- assert(First <= Last);
-
- uint64_t Weight = 0;
- unsigned NumCmps = 0;
- std::vector<MachineBasicBlock*> Table;
- DenseMap<MachineBasicBlock*, uint32_t> JTWeights;
- for (unsigned I = First; I <= Last; ++I) {
- assert(Clusters[I].Kind == CC_Range);
- Weight += Clusters[I].Weight;
- APInt Low = Clusters[I].Low->getValue();
- APInt High = Clusters[I].High->getValue();
- NumCmps += (Low == High) ? 1 : 2;
- if (I != First) {
- // Fill the gap between this and the previous cluster.
- APInt PreviousHigh = Clusters[I - 1].High->getValue();
- assert(PreviousHigh.slt(Low));
- uint64_t Gap = (Low - PreviousHigh).getLimitedValue() - 1;
- for (uint64_t J = 0; J < Gap; J++)
- Table.push_back(DefaultMBB);
- }
- for (APInt X = Low; X.sle(High); ++X)
- Table.push_back(Clusters[I].MBB);
- JTWeights[Clusters[I].MBB] += Clusters[I].Weight;
- }
-
- unsigned NumDests = JTWeights.size();
- if (isSuitableForBitTests(NumDests, NumCmps,
- Clusters[First].Low->getValue(),
- Clusters[Last].High->getValue())) {
- // Clusters[First..Last] should be lowered as bit tests instead.
- return false;
- }
-
- // Create the MBB that will load from and jump through the table.
- // Note: We create it here, but it's not inserted into the function yet.
- MachineFunction *CurMF = FuncInfo.MF;
- MachineBasicBlock *JumpTableMBB =
- CurMF->CreateMachineBasicBlock(SI->getParent());
-
- // Add successors. Note: use table order for determinism.
- SmallPtrSet<MachineBasicBlock *, 8> Done;
- for (MachineBasicBlock *Succ : Table) {
- if (Done.count(Succ))
- continue;
- addSuccessorWithWeight(JumpTableMBB, Succ, JTWeights[Succ]);
- Done.insert(Succ);
- }
-
- const TargetLowering &TLI = DAG.getTargetLoweringInfo();
- unsigned JTI = CurMF->getOrCreateJumpTableInfo(TLI.getJumpTableEncoding())
- ->createJumpTableIndex(Table);
-
- // Set up the jump table info.
- JumpTable JT(-1U, JTI, JumpTableMBB, nullptr);
- JumpTableHeader JTH(Clusters[First].Low->getValue(),
- Clusters[Last].High->getValue(), SI->getCondition(),
- nullptr, false);
- JTCases.push_back(JumpTableBlock(JTH, JT));
-
- JTCluster = CaseCluster::jumpTable(Clusters[First].Low, Clusters[Last].High,
- JTCases.size() - 1, Weight);
- return true;
-}
-
-void SelectionDAGBuilder::findJumpTables(CaseClusterVector &Clusters,
- const SwitchInst *SI,
- MachineBasicBlock *DefaultMBB) {
-#ifndef NDEBUG
- // Clusters must be non-empty, sorted, and only contain Range clusters.
- assert(!Clusters.empty());
- for (CaseCluster &C : Clusters)
- assert(C.Kind == CC_Range);
- for (unsigned i = 1, e = Clusters.size(); i < e; ++i)
- assert(Clusters[i - 1].High->getValue().slt(Clusters[i].Low->getValue()));
-#endif
-
- const TargetLowering &TLI = DAG.getTargetLoweringInfo();
- if (!areJTsAllowed(TLI))
- return;
-
- const int64_t N = Clusters.size();
- const unsigned MinJumpTableSize = TLI.getMinimumJumpTableEntries();
-
- // Split Clusters into minimum number of dense partitions. The algorithm uses
- // the same idea as Kannan & Proebsting "Correction to 'Producing Good Code
- // for the Case Statement'" (1994), but builds the MinPartitions array in
- // reverse order to make it easier to reconstruct the partitions in ascending
- // order. In the choice between two optimal partitionings, it picks the one
- // which yields more jump tables.
-
- // MinPartitions[i] is the minimum nbr of partitions of Clusters[i..N-1].
- SmallVector<unsigned, 8> MinPartitions(N);
- // LastElement[i] is the last element of the partition starting at i.
- SmallVector<unsigned, 8> LastElement(N);
- // NumTables[i]: nbr of >= MinJumpTableSize partitions from Clusters[i..N-1].
- SmallVector<unsigned, 8> NumTables(N);
- // TotalCases[i]: Total nbr of cases in Clusters[0..i].
- SmallVector<unsigned, 8> TotalCases(N);
-
- for (unsigned i = 0; i < N; ++i) {
- APInt Hi = Clusters[i].High->getValue();
- APInt Lo = Clusters[i].Low->getValue();
- TotalCases[i] = (Hi - Lo).getLimitedValue() + 1;
- if (i != 0)
- TotalCases[i] += TotalCases[i - 1];
- }
-
- // Base case: There is only one way to partition Clusters[N-1].
- MinPartitions[N - 1] = 1;
- LastElement[N - 1] = N - 1;
- assert(MinJumpTableSize > 1);
- NumTables[N - 1] = 0;
-
- // Note: loop indexes are signed to avoid underflow.
- for (int64_t i = N - 2; i >= 0; i--) {
- // Find optimal partitioning of Clusters[i..N-1].
- // Baseline: Put Clusters[i] into a partition on its own.
- MinPartitions[i] = MinPartitions[i + 1] + 1;
- LastElement[i] = i;
- NumTables[i] = NumTables[i + 1];
-
- // Search for a solution that results in fewer partitions.
- for (int64_t j = N - 1; j > i; j--) {
- // Try building a partition from Clusters[i..j].
- if (isDense(Clusters, &TotalCases[0], i, j)) {
- unsigned NumPartitions = 1 + (j == N - 1 ? 0 : MinPartitions[j + 1]);
- bool IsTable = j - i + 1 >= MinJumpTableSize;
- unsigned Tables = IsTable + (j == N - 1 ? 0 : NumTables[j + 1]);
-
- // If this j leads to fewer partitions, or same number of partitions
- // with more lookup tables, it is a better partitioning.
- if (NumPartitions < MinPartitions[i] ||
- (NumPartitions == MinPartitions[i] && Tables > NumTables[i])) {
- MinPartitions[i] = NumPartitions;
- LastElement[i] = j;
- NumTables[i] = Tables;
- }
- }
- }
- }
-
- // Iterate over the partitions, replacing some with jump tables in-place.
- unsigned DstIndex = 0;
- for (unsigned First = 0, Last; First < N; First = Last + 1) {
- Last = LastElement[First];
- assert(Last >= First);
- assert(DstIndex <= First);
- unsigned NumClusters = Last - First + 1;
-
- CaseCluster JTCluster;
- if (NumClusters >= MinJumpTableSize &&
- buildJumpTable(Clusters, First, Last, SI, DefaultMBB, JTCluster)) {
- Clusters[DstIndex++] = JTCluster;
- } else {
- for (unsigned I = First; I <= Last; ++I)
- std::memmove(&Clusters[DstIndex++], &Clusters[I], sizeof(Clusters[I]));
- }
- }
- Clusters.resize(DstIndex);
-}
-
-bool SelectionDAGBuilder::rangeFitsInWord(const APInt &Low, const APInt &High) {
- // FIXME: Using the pointer type doesn't seem ideal.
- uint64_t BW = DAG.getTargetLoweringInfo().getPointerTy().getSizeInBits();
- uint64_t Range = (High - Low).getLimitedValue(UINT64_MAX - 1) + 1;
- return Range <= BW;
-}
-
-bool SelectionDAGBuilder::isSuitableForBitTests(unsigned NumDests,
- unsigned NumCmps,
- const APInt &Low,
- const APInt &High) {
- // FIXME: I don't think NumCmps is the correct metric: a single case and a
- // range of cases both require only one branch to lower. Just looking at the
- // number of clusters and destinations should be enough to decide whether to
- // build bit tests.
-
- // To lower a range with bit tests, the range must fit the bitwidth of a
- // machine word.
- if (!rangeFitsInWord(Low, High))
- return false;
-
- // Decide whether it's profitable to lower this range with bit tests. Each
- // destination requires a bit test and branch, and there is an overall range
- // check branch. For a small number of clusters, separate comparisons might be
- // cheaper, and for many destinations, splitting the range might be better.
- return (NumDests == 1 && NumCmps >= 3) ||
- (NumDests == 2 && NumCmps >= 5) ||
- (NumDests == 3 && NumCmps >= 6);
-}
-
-bool SelectionDAGBuilder::buildBitTests(CaseClusterVector &Clusters,
- unsigned First, unsigned Last,
- const SwitchInst *SI,
- CaseCluster &BTCluster) {
- assert(First <= Last);
- if (First == Last)
- return false;
-
- BitVector Dests(FuncInfo.MF->getNumBlockIDs());
- unsigned NumCmps = 0;
- for (int64_t I = First; I <= Last; ++I) {
- assert(Clusters[I].Kind == CC_Range);
- Dests.set(Clusters[I].MBB->getNumber());
- NumCmps += (Clusters[I].Low == Clusters[I].High) ? 1 : 2;
- }
- unsigned NumDests = Dests.count();
-
- APInt Low = Clusters[First].Low->getValue();
- APInt High = Clusters[Last].High->getValue();
- assert(Low.slt(High));
-
- if (!isSuitableForBitTests(NumDests, NumCmps, Low, High))
- return false;
-
- APInt LowBound;
- APInt CmpRange;
-
- const int BitWidth =
- DAG.getTargetLoweringInfo().getPointerTy().getSizeInBits();
- assert((High - Low + 1).sle(BitWidth) && "Case range must fit in bit mask!");
-
- if (Low.isNonNegative() && High.slt(BitWidth)) {
- // Optimize the case where all the case values fit in a
- // word without having to subtract minValue. In this case,
- // we can optimize away the subtraction.
- LowBound = APInt::getNullValue(Low.getBitWidth());
- CmpRange = High;
- } else {
- LowBound = Low;
- CmpRange = High - Low;
- }
-
- CaseBitsVector CBV;
- uint64_t TotalWeight = 0;
- for (unsigned i = First; i <= Last; ++i) {
- // Find the CaseBits for this destination.
- unsigned j;
- for (j = 0; j < CBV.size(); ++j)
- if (CBV[j].BB == Clusters[i].MBB)
- break;
- if (j == CBV.size())
- CBV.push_back(CaseBits(0, Clusters[i].MBB, 0, 0));
- CaseBits *CB = &CBV[j];
-
- // Update Mask, Bits and ExtraWeight.
- uint64_t Lo = (Clusters[i].Low->getValue() - LowBound).getZExtValue();
- uint64_t Hi = (Clusters[i].High->getValue() - LowBound).getZExtValue();
- for (uint64_t j = Lo; j <= Hi; ++j) {
- CB->Mask |= 1ULL << j;
- CB->Bits++;
- }
- CB->ExtraWeight += Clusters[i].Weight;
- TotalWeight += Clusters[i].Weight;
- }
-
- BitTestInfo BTI;
- std::sort(CBV.begin(), CBV.end(), [](const CaseBits &a, const CaseBits &b) {
- // FIXME: Sort by weight.
- return a.Bits > b.Bits;
- });
-
- for (auto &CB : CBV) {
- MachineBasicBlock *BitTestBB =
- FuncInfo.MF->CreateMachineBasicBlock(SI->getParent());
- BTI.push_back(BitTestCase(CB.Mask, BitTestBB, CB.BB, CB.ExtraWeight));
- }
- BitTestCases.push_back(BitTestBlock(LowBound, CmpRange, SI->getCondition(),
- -1U, MVT::Other, false, nullptr,
- nullptr, std::move(BTI)));
-
- BTCluster = CaseCluster::bitTests(Clusters[First].Low, Clusters[Last].High,
- BitTestCases.size() - 1, TotalWeight);
- return true;
-}
-
-void SelectionDAGBuilder::findBitTestClusters(CaseClusterVector &Clusters,
- const SwitchInst *SI) {
-// Partition Clusters into as few subsets as possible, where each subset has a
-// range that fits in a machine word and has <= 3 unique destinations.
-
-#ifndef NDEBUG
- // Clusters must be sorted and contain Range or JumpTable clusters.
- assert(!Clusters.empty());
- assert(Clusters[0].Kind == CC_Range || Clusters[0].Kind == CC_JumpTable);
- for (const CaseCluster &C : Clusters)
- assert(C.Kind == CC_Range || C.Kind == CC_JumpTable);
- for (unsigned i = 1; i < Clusters.size(); ++i)
- assert(Clusters[i-1].High->getValue().slt(Clusters[i].Low->getValue()));
-#endif
-
- // If target does not have legal shift left, do not emit bit tests at all.
- const TargetLowering &TLI = DAG.getTargetLoweringInfo();
- EVT PTy = TLI.getPointerTy();
- if (!TLI.isOperationLegal(ISD::SHL, PTy))
- return;
-
- int BitWidth = PTy.getSizeInBits();
- const int64_t N = Clusters.size();
-
- // MinPartitions[i] is the minimum nbr of partitions of Clusters[i..N-1].
- SmallVector<unsigned, 8> MinPartitions(N);
- // LastElement[i] is the last element of the partition starting at i.
- SmallVector<unsigned, 8> LastElement(N);
-
- // FIXME: This might not be the best algorithm for finding bit test clusters.
-
- // Base case: There is only one way to partition Clusters[N-1].
- MinPartitions[N - 1] = 1;
- LastElement[N - 1] = N - 1;
-
- // Note: loop indexes are signed to avoid underflow.
- for (int64_t i = N - 2; i >= 0; --i) {
- // Find optimal partitioning of Clusters[i..N-1].
- // Baseline: Put Clusters[i] into a partition on its own.
- MinPartitions[i] = MinPartitions[i + 1] + 1;
- LastElement[i] = i;
-
- // Search for a solution that results in fewer partitions.
- // Note: the search is limited by BitWidth, reducing time complexity.
- for (int64_t j = std::min(N - 1, i + BitWidth - 1); j > i; --j) {
- // Try building a partition from Clusters[i..j].
-
- // Check the range.
- if (!rangeFitsInWord(Clusters[i].Low->getValue(),
- Clusters[j].High->getValue()))
- continue;
-
- // Check nbr of destinations and cluster types.
- // FIXME: This works, but doesn't seem very efficient.
- bool RangesOnly = true;
- BitVector Dests(FuncInfo.MF->getNumBlockIDs());
- for (int64_t k = i; k <= j; k++) {
- if (Clusters[k].Kind != CC_Range) {
- RangesOnly = false;
- break;
- }
- Dests.set(Clusters[k].MBB->getNumber());
- }
- if (!RangesOnly || Dests.count() > 3)
- break;
-
- // Check if it's a better partition.
- unsigned NumPartitions = 1 + (j == N - 1 ? 0 : MinPartitions[j + 1]);
- if (NumPartitions < MinPartitions[i]) {
- // Found a better partition.
- MinPartitions[i] = NumPartitions;
- LastElement[i] = j;
- }
- }
- }
-
- // Iterate over the partitions, replacing with bit-test clusters in-place.
- unsigned DstIndex = 0;
- for (unsigned First = 0, Last; First < N; First = Last + 1) {
- Last = LastElement[First];
- assert(First <= Last);
- assert(DstIndex <= First);
-
- CaseCluster BitTestCluster;
- if (buildBitTests(Clusters, First, Last, SI, BitTestCluster)) {
- Clusters[DstIndex++] = BitTestCluster;
- } else {
- for (unsigned I = First; I <= Last; ++I)
- std::memmove(&Clusters[DstIndex++], &Clusters[I], sizeof(Clusters[I]));
- }
- }
- Clusters.resize(DstIndex);
-}
-
-void SelectionDAGBuilder::lowerWorkItem(SwitchWorkListItem W, Value *Cond,
- MachineBasicBlock *SwitchMBB,
- MachineBasicBlock *DefaultMBB) {
- MachineFunction *CurMF = FuncInfo.MF;
- MachineBasicBlock *NextMBB = nullptr;
- MachineFunction::iterator BBI = W.MBB;
- if (++BBI != FuncInfo.MF->end())
- NextMBB = BBI;
-
- unsigned Size = W.LastCluster - W.FirstCluster + 1;
-
- BranchProbabilityInfo *BPI = FuncInfo.BPI;
-
- if (Size == 2 && W.MBB == SwitchMBB) {
- // If any two of the cases has the same destination, and if one value
- // is the same as the other, but has one bit unset that the other has set,
- // use bit manipulation to do two compares at once. For example:
- // "if (X == 6 || X == 4)" -> "if ((X|2) == 6)"
- // TODO: This could be extended to merge any 2 cases in switches with 3
- // cases.
- // TODO: Handle cases where W.CaseBB != SwitchBB.
- CaseCluster &Small = *W.FirstCluster;
- CaseCluster &Big = *W.LastCluster;
-
- if (Small.Low == Small.High && Big.Low == Big.High &&
- Small.MBB == Big.MBB) {
- const APInt &SmallValue = Small.Low->getValue();
- const APInt &BigValue = Big.Low->getValue();
-
- // Check that there is only one bit different.
- if (BigValue.countPopulation() == SmallValue.countPopulation() + 1 &&
- (SmallValue | BigValue) == BigValue) {
- // Isolate the common bit.
- APInt CommonBit = BigValue & ~SmallValue;
- assert((SmallValue | CommonBit) == BigValue &&
- CommonBit.countPopulation() == 1 && "Not a common bit?");
-
- SDValue CondLHS = getValue(Cond);
- EVT VT = CondLHS.getValueType();
- SDLoc DL = getCurSDLoc();
-
- SDValue Or = DAG.getNode(ISD::OR, DL, VT, CondLHS,
- DAG.getConstant(CommonBit, VT));
- SDValue Cond = DAG.getSetCC(DL, MVT::i1, Or,
- DAG.getConstant(BigValue, VT), ISD::SETEQ);
-
- // Update successor info.
- // Both Small and Big will jump to Small.BB, so we sum up the weights.
- addSuccessorWithWeight(SwitchMBB, Small.MBB, Small.Weight + Big.Weight);
- addSuccessorWithWeight(
- SwitchMBB, DefaultMBB,
- // The default destination is the first successor in IR.
- BPI ? BPI->getEdgeWeight(SwitchMBB->getBasicBlock(), (unsigned)0)
- : 0);
-
- // Insert the true branch.
- SDValue BrCond =
- DAG.getNode(ISD::BRCOND, DL, MVT::Other, getControlRoot(), Cond,
- DAG.getBasicBlock(Small.MBB));
- // Insert the false branch.
- BrCond = DAG.getNode(ISD::BR, DL, MVT::Other, BrCond,
- DAG.getBasicBlock(DefaultMBB));
-
- DAG.setRoot(BrCond);
- return;
- }
- }
- }
-
- if (TM.getOptLevel() != CodeGenOpt::None) {
- // Order cases by weight so the most likely case will be checked first.
- std::sort(W.FirstCluster, W.LastCluster + 1,
- [](const CaseCluster &a, const CaseCluster &b) {
- return a.Weight > b.Weight;
- });
-
- // Rearrange the case blocks so that the last one falls through if possible.
- // Start at the bottom as that's the case with the lowest weight.
- // FIXME: Take branch probability into account.
- for (CaseClusterIt I = W.LastCluster - 1; I >= W.FirstCluster; --I) {
- if (I->Kind == CC_Range && I->MBB == NextMBB) {
- std::swap(*I, *W.LastCluster);
- break;
- }
- }
- }
-
- // Compute total weight.
- uint32_t UnhandledWeights = 0;
- for (CaseClusterIt I = W.FirstCluster; I <= W.LastCluster; ++I)
- UnhandledWeights += I->Weight;
-
- MachineBasicBlock *CurMBB = W.MBB;
- for (CaseClusterIt I = W.FirstCluster, E = W.LastCluster; I <= E; ++I) {
- MachineBasicBlock *Fallthrough;
- if (I == W.LastCluster) {
- // For the last cluster, fall through to the default destination.
- Fallthrough = DefaultMBB;
- } else {
- Fallthrough = CurMF->CreateMachineBasicBlock(CurMBB->getBasicBlock());
- CurMF->insert(BBI, Fallthrough);
- // Put Cond in a virtual register to make it available from the new blocks.
- ExportFromCurrentBlock(Cond);
- }
-
- switch (I->Kind) {
- case CC_JumpTable: {
- // FIXME: Optimize away range check based on pivot comparisons.
- JumpTableHeader *JTH = &JTCases[I->JTCasesIndex].first;
- JumpTable *JT = &JTCases[I->JTCasesIndex].second;
-
- // The jump block hasn't been inserted yet; insert it here.
- MachineBasicBlock *JumpMBB = JT->MBB;
- CurMF->insert(BBI, JumpMBB);
- addSuccessorWithWeight(CurMBB, Fallthrough);
- addSuccessorWithWeight(CurMBB, JumpMBB);
-
- // The jump table header will be inserted in our current block, do the
- // range check, and fall through to our fallthrough block.
- JTH->HeaderBB = CurMBB;
- JT->Default = Fallthrough; // FIXME: Move Default to JumpTableHeader.
-
- // If we're in the right place, emit the jump table header right now.
- if (CurMBB == SwitchMBB) {
- visitJumpTableHeader(*JT, *JTH, SwitchMBB);
- JTH->Emitted = true;
- }
- break;
- }
- case CC_BitTests: {
- // FIXME: Optimize away range check based on pivot comparisons.
- BitTestBlock *BTB = &BitTestCases[I->BTCasesIndex];
-
- // The bit test blocks haven't been inserted yet; insert them here.
- for (BitTestCase &BTC : BTB->Cases)
- CurMF->insert(BBI, BTC.ThisBB);
-
- // Fill in fields of the BitTestBlock.
- BTB->Parent = CurMBB;
- BTB->Default = Fallthrough;
-
- // If we're in the right place, emit the bit test header header right now.
- if (CurMBB ==SwitchMBB) {
- visitBitTestHeader(*BTB, SwitchMBB);
- BTB->Emitted = true;
- }
- break;
- }
- case CC_Range: {
- const Value *RHS, *LHS, *MHS;
- ISD::CondCode CC;
- if (I->Low == I->High) {
- // Check Cond == I->Low.
- CC = ISD::SETEQ;
- LHS = Cond;
- RHS=I->Low;
- MHS = nullptr;
- } else {
- // Check I->Low <= Cond <= I->High.
- CC = ISD::SETLE;
- LHS = I->Low;
- MHS = Cond;
- RHS = I->High;
- }
-
- // The false weight is the sum of all unhandled cases.
- UnhandledWeights -= I->Weight;
- CaseBlock CB(CC, LHS, RHS, MHS, I->MBB, Fallthrough, CurMBB, I->Weight,
- UnhandledWeights);
-
- if (CurMBB == SwitchMBB)
- visitSwitchCase(CB, SwitchMBB);
- else
- SwitchCases.push_back(CB);
-
- break;
- }
- }
- CurMBB = Fallthrough;
- }
-}
-
-void SelectionDAGBuilder::splitWorkItem(SwitchWorkList &WorkList,
- const SwitchWorkListItem &W,
- Value *Cond,
- MachineBasicBlock *SwitchMBB) {
- assert(W.FirstCluster->Low->getValue().slt(W.LastCluster->Low->getValue()) &&
- "Clusters not sorted?");
-
- unsigned NumClusters = W.LastCluster - W.FirstCluster + 1;
- assert(NumClusters >= 2 && "Too small to split!");
-
- // FIXME: When we have profile info, we might want to balance the tree based
- // on weights instead of node count.
-
- CaseClusterIt PivotCluster = W.FirstCluster + NumClusters / 2;
- CaseClusterIt FirstLeft = W.FirstCluster;
- CaseClusterIt LastLeft = PivotCluster - 1;
- CaseClusterIt FirstRight = PivotCluster;
- CaseClusterIt LastRight = W.LastCluster;
- const ConstantInt *Pivot = PivotCluster->Low;
-
- // New blocks will be inserted immediately after the current one.
- MachineFunction::iterator BBI = W.MBB;
- ++BBI;
-
- // We will branch to the LHS if Value < Pivot. If LHS is a single cluster,
- // we can branch to its destination directly if it's squeezed exactly in
- // between the known lower bound and Pivot - 1.
- MachineBasicBlock *LeftMBB;
- if (FirstLeft == LastLeft && FirstLeft->Kind == CC_Range &&
- FirstLeft->Low == W.GE &&
- (FirstLeft->High->getValue() + 1LL) == Pivot->getValue()) {
- LeftMBB = FirstLeft->MBB;
- } else {
- LeftMBB = FuncInfo.MF->CreateMachineBasicBlock(W.MBB->getBasicBlock());
- FuncInfo.MF->insert(BBI, LeftMBB);
- WorkList.push_back({LeftMBB, FirstLeft, LastLeft, W.GE, Pivot});
- // Put Cond in a virtual register to make it available from the new blocks.
- ExportFromCurrentBlock(Cond);
- }
-
- // Similarly, we will branch to the RHS if Value >= Pivot. If RHS is a
- // single cluster, RHS.Low == Pivot, and we can branch to its destination
- // directly if RHS.High equals the current upper bound.
- MachineBasicBlock *RightMBB;
- if (FirstRight == LastRight && FirstRight->Kind == CC_Range &&
- W.LT && (FirstRight->High->getValue() + 1ULL) == W.LT->getValue()) {
- RightMBB = FirstRight->MBB;
- } else {
- RightMBB = FuncInfo.MF->CreateMachineBasicBlock(W.MBB->getBasicBlock());
- FuncInfo.MF->insert(BBI, RightMBB);
- WorkList.push_back({RightMBB, FirstRight, LastRight, Pivot, W.LT});
- // Put Cond in a virtual register to make it available from the new blocks.
- ExportFromCurrentBlock(Cond);
- }
-
- // Create the CaseBlock record that will be used to lower the branch.
- CaseBlock CB(ISD::SETLT, Cond, Pivot, nullptr, LeftMBB, RightMBB, W.MBB);
-
- if (W.MBB == SwitchMBB)
- visitSwitchCase(CB, SwitchMBB);
- else
- SwitchCases.push_back(CB);
-}
-
-void SelectionDAGBuilder::visitSwitch(const SwitchInst &SI) {
- // Extract cases from the switch.
- BranchProbabilityInfo *BPI = FuncInfo.BPI;
- CaseClusterVector Clusters;
- Clusters.reserve(SI.getNumCases());
- for (auto I : SI.cases()) {
- MachineBasicBlock *Succ = FuncInfo.MBBMap[I.getCaseSuccessor()];
- const ConstantInt *CaseVal = I.getCaseValue();
- uint32_t Weight = 0; // FIXME: Use 1 instead?
- if (BPI)
- Weight = BPI->getEdgeWeight(SI.getParent(), I.getSuccessorIndex());
- Clusters.push_back(CaseCluster::range(CaseVal, CaseVal, Succ, Weight));
- }
-
- MachineBasicBlock *DefaultMBB = FuncInfo.MBBMap[SI.getDefaultDest()];
-
- if (TM.getOptLevel() != CodeGenOpt::None) {
- // Cluster adjacent cases with the same destination.
- sortAndRangeify(Clusters);
-
- // Replace an unreachable default with the most popular destination.
- // FIXME: Exploit unreachable default more aggressively.
- bool UnreachableDefault =
- isa<UnreachableInst>(SI.getDefaultDest()->getFirstNonPHIOrDbg());
- if (UnreachableDefault && !Clusters.empty()) {
- DenseMap<const BasicBlock *, unsigned> Popularity;
- unsigned MaxPop = 0;
- const BasicBlock *MaxBB = nullptr;
- for (auto I : SI.cases()) {
- const BasicBlock *BB = I.getCaseSuccessor();
- if (++Popularity[BB] > MaxPop) {
- MaxPop = Popularity[BB];
- MaxBB = BB;
- }
- }
- // Set new default.
- assert(MaxPop > 0 && MaxBB);
- DefaultMBB = FuncInfo.MBBMap[MaxBB];
-
- // Remove cases that were pointing to the destination that is now the
- // default.
- CaseClusterVector New;
- New.reserve(Clusters.size());
- for (CaseCluster &CC : Clusters) {
- if (CC.MBB != DefaultMBB)
- New.push_back(CC);
- }
- Clusters = std::move(New);
- }
- }
-
- // If there is only the default destination, jump there directly.
- MachineBasicBlock *SwitchMBB = FuncInfo.MBB;
- if (Clusters.empty()) {
- SwitchMBB->addSuccessor(DefaultMBB);
- if (DefaultMBB != NextBlock(SwitchMBB)) {
- DAG.setRoot(DAG.getNode(ISD::BR, getCurSDLoc(), MVT::Other,
- getControlRoot(), DAG.getBasicBlock(SwitchMBB)));
- }
- return;
- }
-
- if (TM.getOptLevel() != CodeGenOpt::None) {
- findJumpTables(Clusters, &SI, DefaultMBB);
- findBitTestClusters(Clusters, &SI);
- }
-
-
- DEBUG({
- dbgs() << "Case clusters: ";
- for (const CaseCluster &C : Clusters) {
- if (C.Kind == CC_JumpTable) dbgs() << "JT:";
- if (C.Kind == CC_BitTests) dbgs() << "BT:";
-
- C.Low->getValue().print(dbgs(), true);
- if (C.Low != C.High) {
- dbgs() << '-';
- C.High->getValue().print(dbgs(), true);
- }
- dbgs() << ' ';
- }
- dbgs() << '\n';
- });
-
- assert(!Clusters.empty());
- SwitchWorkList WorkList;
- CaseClusterIt First = Clusters.begin();
- CaseClusterIt Last = Clusters.end() - 1;
- WorkList.push_back({SwitchMBB, First, Last, nullptr, nullptr});
-
- while (!WorkList.empty()) {
- SwitchWorkListItem W = WorkList.back();
- WorkList.pop_back();
- unsigned NumClusters = W.LastCluster - W.FirstCluster + 1;
-
- if (NumClusters > 3 && TM.getOptLevel() != CodeGenOpt::None) {
- // For optimized builds, lower large range as a balanced binary tree.
- splitWorkItem(WorkList, W, SI.getCondition(), SwitchMBB);
- continue;
- }
-
- lowerWorkItem(W, SI.getCondition(), SwitchMBB, DefaultMBB);
- }
-}
projects / oota-llvm.git / blobdiff