DISubprogram SP(Subprograms.getElement(i));
if (ProcessedSPNodes.count(SP) != 0)
continue;
- assert(SP.isSubprogram() &&
- "CU's subprogram list contains a non-subprogram");
- assert(SP.isDefinition() &&
- "CU's subprogram list contains a subprogram declaration");
- DIArray Variables = SP.getVariables();
- if (Variables.getNumElements() == 0)
- continue;
-
- DIE *SPDIE = AbstractSPDies.lookup(SP);
- if (!SPDIE)
- SPDIE = SPCU->getDIE(SP);
- assert(SPDIE);
- for (unsigned vi = 0, ve = Variables.getNumElements(); vi != ve; ++vi) {
- DIVariable DV(Variables.getElement(vi));
- assert(DV.isVariable());
- DbgVariable NewVar(DV, DIExpression(nullptr), this);
- auto VariableDie = SPCU->constructVariableDIE(NewVar);
- SPCU->applyVariableAttributes(NewVar, *VariableDie);
- SPDIE->addChild(std::move(VariableDie));
- }
+ SPCU->collectDeadVariables(SP);
}
}
}
// Handle anything that needs to be done on a per-unit basis after
// all other generation.
- for (const auto &TheU : getUnits()) {
+ for (const auto &P : CUMap) {
+ auto &TheCU = *P.second;
// Emit DW_AT_containing_type attribute to connect types with their
// vtable holding type.
- TheU->constructContainingTypeDIEs();
+ TheCU.constructContainingTypeDIEs();
// Add CU specific attributes if we need to add any.
- if (TheU->getUnitDie().getTag() == dwarf::DW_TAG_compile_unit) {
- // If we're splitting the dwarf out now that we've got the entire
- // CU then add the dwo id to it.
- DwarfCompileUnit *SkCU =
- static_cast<DwarfCompileUnit *>(TheU->getSkeleton());
- if (useSplitDwarf()) {
- // Emit a unique identifier for this CU.
- uint64_t ID = DIEHash(Asm).computeCUSignature(TheU->getUnitDie());
- TheU->addUInt(TheU->getUnitDie(), dwarf::DW_AT_GNU_dwo_id,
- dwarf::DW_FORM_data8, ID);
- SkCU->addUInt(SkCU->getUnitDie(), dwarf::DW_AT_GNU_dwo_id,
- dwarf::DW_FORM_data8, ID);
-
- // We don't keep track of which addresses are used in which CU so this
- // is a bit pessimistic under LTO.
- if (!AddrPool.isEmpty())
- SkCU->addSectionLabel(SkCU->getUnitDie(), dwarf::DW_AT_GNU_addr_base,
- DwarfAddrSectionSym, DwarfAddrSectionSym);
- if (!TheU->getRangeLists().empty())
- SkCU->addSectionLabel(
- SkCU->getUnitDie(), dwarf::DW_AT_GNU_ranges_base,
- DwarfDebugRangeSectionSym, DwarfDebugRangeSectionSym);
- }
+ // If we're splitting the dwarf out now that we've got the entire
+ // CU then add the dwo id to it.
+ auto *SkCU = TheCU.getSkeleton();
+ if (useSplitDwarf()) {
+ // Emit a unique identifier for this CU.
+ uint64_t ID = DIEHash(Asm).computeCUSignature(TheCU.getUnitDie());
+ TheCU.addUInt(TheCU.getUnitDie(), dwarf::DW_AT_GNU_dwo_id,
+ dwarf::DW_FORM_data8, ID);
+ SkCU->addUInt(SkCU->getUnitDie(), dwarf::DW_AT_GNU_dwo_id,
+ dwarf::DW_FORM_data8, ID);
+
+ // We don't keep track of which addresses are used in which CU so this
+ // is a bit pessimistic under LTO.
+ if (!AddrPool.isEmpty())
+ SkCU->addSectionLabel(SkCU->getUnitDie(), dwarf::DW_AT_GNU_addr_base,
+ DwarfAddrSectionSym, DwarfAddrSectionSym);
+ if (!TheCU.getRangeLists().empty())
+ SkCU->addSectionLabel(SkCU->getUnitDie(), dwarf::DW_AT_GNU_ranges_base,
+ DwarfDebugRangeSectionSym,
+ DwarfDebugRangeSectionSym);
+ }
- // If we have code split among multiple sections or non-contiguous
- // ranges of code then emit a DW_AT_ranges attribute on the unit that will
- // remain in the .o file, otherwise add a DW_AT_low_pc.
- // FIXME: We should use ranges allow reordering of code ala
- // .subsections_via_symbols in mach-o. This would mean turning on
- // ranges for all subprogram DIEs for mach-o.
- DwarfCompileUnit &U =
- SkCU ? *SkCU : static_cast<DwarfCompileUnit &>(*TheU);
- unsigned NumRanges = TheU->getRanges().size();
- if (NumRanges) {
- if (NumRanges > 1) {
- U.addSectionLabel(U.getUnitDie(), dwarf::DW_AT_ranges,
- Asm->GetTempSymbol("cu_ranges", U.getUniqueID()),
- DwarfDebugRangeSectionSym);
-
- // A DW_AT_low_pc attribute may also be specified in combination with
- // DW_AT_ranges to specify the default base address for use in
- // location lists (see Section 2.6.2) and range lists (see Section
- // 2.17.3).
- U.addUInt(U.getUnitDie(), dwarf::DW_AT_low_pc, dwarf::DW_FORM_addr,
- 0);
- } else {
- RangeSpan &Range = TheU->getRanges().back();
- U.attachLowHighPC(U.getUnitDie(), Range.getStart(), Range.getEnd());
- }
+ // If we have code split among multiple sections or non-contiguous
+ // ranges of code then emit a DW_AT_ranges attribute on the unit that will
+ // remain in the .o file, otherwise add a DW_AT_low_pc.
+ // FIXME: We should use ranges allow reordering of code ala
+ // .subsections_via_symbols in mach-o. This would mean turning on
+ // ranges for all subprogram DIEs for mach-o.
+ DwarfCompileUnit &U = SkCU ? *SkCU : TheCU;
+ unsigned NumRanges = TheCU.getRanges().size();
+ if (NumRanges) {
+ if (NumRanges > 1) {
+ U.addSectionLabel(U.getUnitDie(), dwarf::DW_AT_ranges,
+ Asm->GetTempSymbol("cu_ranges", U.getUniqueID()),
+ DwarfDebugRangeSectionSym);
+
+ // A DW_AT_low_pc attribute may also be specified in combination with
+ // DW_AT_ranges to specify the default base address for use in
+ // location lists (see Section 2.6.2) and range lists (see Section
+ // 2.17.3).
+ U.addUInt(U.getUnitDie(), dwarf::DW_AT_low_pc, dwarf::DW_FORM_addr, 0);
+ } else {
+ RangeSpan &Range = TheCU.getRanges().back();
+ U.attachLowHighPC(U.getUnitDie(), Range.getStart(), Range.getEnd());
}
}
}
if (Globals.empty())
continue;
- if (auto Skeleton = static_cast<DwarfCompileUnit *>(TheU->getSkeleton()))
+ if (auto *Skeleton = TheU->getSkeleton())
TheU = Skeleton;
unsigned ID = TheU->getUniqueID();
NewTU.setTypeSignature(Signature);
if (useSplitDwarf())
- NewTU.initSection(Asm->getObjFileLowering().getDwarfTypesDWOSection(),
- DwarfTypesDWOSectionSym);
+ NewTU.initSection(Asm->getObjFileLowering().getDwarfTypesDWOSection());
else {
CU.applyStmtList(UnitDie);
NewTU.initSection(
projects / oota-llvm.git / blobdiff