VerifySCEV("verify-scev",
cl::desc("Verify ScalarEvolution's backedge taken counts (slow)"));
-INITIALIZE_PASS_BEGIN(ScalarEvolution, "scalar-evolution",
- "Scalar Evolution Analysis", false, true)
-INITIALIZE_PASS_DEPENDENCY(AssumptionCacheTracker)
-INITIALIZE_PASS_DEPENDENCY(LoopInfoWrapperPass)
-INITIALIZE_PASS_DEPENDENCY(DominatorTreeWrapperPass)
-INITIALIZE_PASS_DEPENDENCY(TargetLibraryInfoWrapperPass)
-INITIALIZE_PASS_END(ScalarEvolution, "scalar-evolution",
- "Scalar Evolution Analysis", false, true)
-char ScalarEvolution::ID = 0;
-
//===----------------------------------------------------------------------===//
// SCEV class definitions
//===----------------------------------------------------------------------===//
Flags = StrengthenNoWrapFlags(this, scAddExpr, Ops, Flags);
// Sort by complexity, this groups all similar expression types together.
- GroupByComplexity(Ops, LI);
+ GroupByComplexity(Ops, &LI);
// If there are any constants, fold them together.
unsigned Idx = 0;
Flags = StrengthenNoWrapFlags(this, scMulExpr, Ops, Flags);
// Sort by complexity, this groups all similar expression types together.
- GroupByComplexity(Ops, LI);
+ GroupByComplexity(Ops, &LI);
// If there are any constants, fold them together.
unsigned Idx = 0;
// Canonicalize nested AddRecs in by nesting them in order of loop depth.
if (const SCEVAddRecExpr *NestedAR = dyn_cast<SCEVAddRecExpr>(Operands[0])) {
const Loop *NestedLoop = NestedAR->getLoop();
- if (L->contains(NestedLoop) ?
- (L->getLoopDepth() < NestedLoop->getLoopDepth()) :
- (!NestedLoop->contains(L) &&
- DT->dominates(L->getHeader(), NestedLoop->getHeader()))) {
+ if (L->contains(NestedLoop)
+ ? (L->getLoopDepth() < NestedLoop->getLoopDepth())
+ : (!NestedLoop->contains(L) &&
+ DT.dominates(L->getHeader(), NestedLoop->getHeader()))) {
SmallVector<const SCEV *, 4> NestedOperands(NestedAR->op_begin(),
NestedAR->op_end());
Operands[0] = NestedAR->getStart();
#endif
// Sort by complexity, this groups all similar expression types together.
- GroupByComplexity(Ops, LI);
+ GroupByComplexity(Ops, &LI);
// If there are any constants, fold them together.
unsigned Idx = 0;
#endif
// Sort by complexity, this groups all similar expression types together.
- GroupByComplexity(Ops, LI);
+ GroupByComplexity(Ops, &LI);
// If there are any constants, fold them together.
unsigned Idx = 0;
// constant expression and then folding it back into a ConstantInt.
// This is just a compile-time optimization.
return getConstant(IntTy,
- F->getParent()->getDataLayout().getTypeAllocSize(AllocTy));
+ F.getParent()->getDataLayout().getTypeAllocSize(AllocTy));
}
const SCEV *ScalarEvolution::getOffsetOfExpr(Type *IntTy,
// This is just a compile-time optimization.
return getConstant(
IntTy,
- F->getParent()->getDataLayout().getStructLayout(STy)->getElementOffset(
+ F.getParent()->getDataLayout().getStructLayout(STy)->getElementOffset(
FieldNo));
}
/// for which isSCEVable must return true.
uint64_t ScalarEvolution::getTypeSizeInBits(Type *Ty) const {
assert(isSCEVable(Ty) && "Type is not SCEVable!");
- return F->getParent()->getDataLayout().getTypeSizeInBits(Ty);
+ return F.getParent()->getDataLayout().getTypeSizeInBits(Ty);
}
/// getEffectiveSCEVType - Return a type with the same bitwidth as
// The only other support type is pointer.
assert(Ty->isPointerTy() && "Unexpected non-pointer non-integer type!");
- return F->getParent()->getDataLayout().getIntPtrType(Ty);
+ return F.getParent()->getDataLayout().getIntPtrType(Ty);
}
const SCEV *ScalarEvolution::getCouldNotCompute() {
- return &CouldNotCompute;
+ return CouldNotCompute.get();
}
namespace {
/// a loop header, making it a potential recurrence, or it doesn't.
///
const SCEV *ScalarEvolution::createNodeForPHI(PHINode *PN) {
- if (const Loop *L = LI->getLoopFor(PN->getParent()))
+ if (const Loop *L = LI.getLoopFor(PN->getParent()))
if (L->getHeader() == PN->getParent()) {
// The loop may have multiple entrances or multiple exits; we can analyze
// this phi as an addrec if it has a unique entry value and a unique
// PHI's incoming blocks are in a different loop, in which case doing so
// risks breaking LCSSA form. Instcombine would normally zap these, but
// it doesn't have DominatorTree information, so it may miss cases.
- if (Value *V =
- SimplifyInstruction(PN, F->getParent()->getDataLayout(), TLI, DT, AC))
- if (LI->replacementPreservesLCSSAForm(PN, V))
+ if (Value *V = SimplifyInstruction(PN, F.getParent()->getDataLayout(), &TLI,
+ &DT, &AC))
+ if (LI.replacementPreservesLCSSAForm(PN, V))
return getSCEV(V);
// If it's not a loop phi, we can't handle it yet.
// For a SCEVUnknown, ask ValueTracking.
unsigned BitWidth = getTypeSizeInBits(U->getType());
APInt Zeros(BitWidth, 0), Ones(BitWidth, 0);
- computeKnownBits(U->getValue(), Zeros, Ones,
- F->getParent()->getDataLayout(), 0, AC, nullptr, DT);
+ computeKnownBits(U->getValue(), Zeros, Ones, F.getParent()->getDataLayout(),
+ 0, &AC, nullptr, &DT);
return Zeros.countTrailingOnes();
}
// Split here to avoid paying the compile-time cost of calling both
// computeKnownBits and ComputeNumSignBits. This restriction can be lifted
// if needed.
- const DataLayout &DL = F->getParent()->getDataLayout();
+ const DataLayout &DL = F.getParent()->getDataLayout();
if (SignHint == ScalarEvolution::HINT_RANGE_UNSIGNED) {
// For a SCEVUnknown, ask ValueTracking.
APInt Zeros(BitWidth, 0), Ones(BitWidth, 0);
- computeKnownBits(U->getValue(), Zeros, Ones, DL, 0, AC, nullptr, DT);
+ computeKnownBits(U->getValue(), Zeros, Ones, DL, 0, &AC, nullptr, &DT);
if (Ones != ~Zeros + 1)
ConservativeResult =
ConservativeResult.intersectWith(ConstantRange(Ones, ~Zeros + 1));
} else {
assert(SignHint == ScalarEvolution::HINT_RANGE_SIGNED &&
"generalize as needed!");
- unsigned NS = ComputeNumSignBits(U->getValue(), DL, 0, AC, nullptr, DT);
+ unsigned NS = ComputeNumSignBits(U->getValue(), DL, 0, &AC, nullptr, &DT);
if (NS > 1)
ConservativeResult = ConservativeResult.intersectWith(
ConstantRange(APInt::getSignedMinValue(BitWidth).ashr(NS - 1),
// recurrence, but getting that requires computing the SCEV of the operands,
// which can be expensive. This check we can do cheaply to rule out some
// cases early.
- Loop *innermostContainingLoop = LI->getLoopFor(BinOp->getParent());
+ Loop *innermostContainingLoop = LI.getLoopFor(BinOp->getParent());
if (innermostContainingLoop == nullptr ||
innermostContainingLoop->getHeader() != BinOp->getParent())
return SCEV::FlagAnyWrap;
// reachable. Such instructions don't matter, and they aren't required
// to obey basic rules for definitions dominating uses which this
// analysis depends on.
- if (!DT->isReachableFromEntry(I->getParent()))
+ if (!DT.isReachableFromEntry(I->getParent()))
return getUnknown(V);
} else if (ConstantExpr *CE = dyn_cast<ConstantExpr>(V))
Opcode = CE->getOpcode();
unsigned BitWidth = A.getBitWidth();
APInt KnownZero(BitWidth, 0), KnownOne(BitWidth, 0);
computeKnownBits(U->getOperand(0), KnownZero, KnownOne,
- F->getParent()->getDataLayout(), 0, AC, nullptr, DT);
+ F.getParent()->getDataLayout(), 0, &AC, nullptr, &DT);
APInt EffectiveMask =
APInt::getLowBitsSet(BitWidth, BitWidth - LZ - TZ).shl(TZ);
// MaxBECount is conservatively the maximum EL.Max, where CouldNotCompute is
// considered greater than any computable EL.Max.
if (EL.Max != getCouldNotCompute() && Latch &&
- DT->dominates(ExitBB, Latch)) {
+ DT.dominates(ExitBB, Latch)) {
if (!MustExitMaxBECount)
MustExitMaxBECount = EL.Max;
else {
unsigned NumIterations = BEs.getZExtValue(); // must be in range
unsigned IterationNum = 0;
- const DataLayout &DL = F->getParent()->getDataLayout();
+ const DataLayout &DL = F.getParent()->getDataLayout();
for (; ; ++IterationNum) {
if (IterationNum == NumIterations)
return RetVal = CurrentIterVals[PN]; // Got exit value!
// EvaluateExpression adds non-phi values to the CurrentIterVals map.
DenseMap<Instruction *, Constant *> NextIterVals;
Constant *NextPHI =
- EvaluateExpression(BEValue, L, CurrentIterVals, DL, TLI);
+ EvaluateExpression(BEValue, L, CurrentIterVals, DL, &TLI);
if (!NextPHI)
return nullptr; // Couldn't evaluate!
NextIterVals[PN] = NextPHI;
Constant *&NextPHI = NextIterVals[PHI];
if (!NextPHI) { // Not already computed.
Value *BEValue = PHI->getIncomingValue(SecondIsBackedge);
- NextPHI = EvaluateExpression(BEValue, L, CurrentIterVals, DL, TLI);
+ NextPHI = EvaluateExpression(BEValue, L, CurrentIterVals, DL, &TLI);
}
if (NextPHI != I->second)
StoppedEvolving = false;
// the loop symbolically to determine when the condition gets a value of
// "ExitWhen".
unsigned MaxIterations = MaxBruteForceIterations; // Limit analysis.
- const DataLayout &DL = F->getParent()->getDataLayout();
+ const DataLayout &DL = F.getParent()->getDataLayout();
for (unsigned IterationNum = 0; IterationNum != MaxIterations;++IterationNum){
ConstantInt *CondVal = dyn_cast_or_null<ConstantInt>(
- EvaluateExpression(Cond, L, CurrentIterVals, DL, TLI));
+ EvaluateExpression(Cond, L, CurrentIterVals, DL, &TLI));
// Couldn't symbolically evaluate.
if (!CondVal) return getCouldNotCompute();
if (NextPHI) continue; // Already computed!
Value *BEValue = PHI->getIncomingValue(SecondIsBackedge);
- NextPHI = EvaluateExpression(BEValue, L, CurrentIterVals, DL, TLI);
+ NextPHI = EvaluateExpression(BEValue, L, CurrentIterVals, DL, &TLI);
}
CurrentIterVals.swap(NextIterVals);
}
// exit value from the loop without using SCEVs.
if (const SCEVUnknown *SU = dyn_cast<SCEVUnknown>(V)) {
if (Instruction *I = dyn_cast<Instruction>(SU->getValue())) {
- const Loop *LI = (*this->LI)[I->getParent()];
+ const Loop *LI = this->LI[I->getParent()];
if (LI && LI->getParentLoop() == L) // Looking for loop exit value.
if (PHINode *PN = dyn_cast<PHINode>(I))
if (PN->getParent() == LI->getHeader()) {
// Check to see if getSCEVAtScope actually made an improvement.
if (MadeImprovement) {
Constant *C = nullptr;
- const DataLayout &DL = F->getParent()->getDataLayout();
+ const DataLayout &DL = F.getParent()->getDataLayout();
if (const CmpInst *CI = dyn_cast<CmpInst>(I))
C = ConstantFoldCompareInstOperands(CI->getPredicate(), Operands[0],
- Operands[1], DL, TLI);
+ Operands[1], DL, &TLI);
else if (const LoadInst *LI = dyn_cast<LoadInst>(I)) {
if (!LI->isVolatile())
C = ConstantFoldLoadFromConstPtr(Operands[0], DL);
} else
C = ConstantFoldInstOperands(I->getOpcode(), I->getType(), Operands,
- DL, TLI);
+ DL, &TLI);
if (!C) return V;
return getSCEV(C);
}
// A loop's header is defined to be a block that dominates the loop.
// If the header has a unique predecessor outside the loop, it must be
// a block that has exactly one successor that can reach the loop.
- if (Loop *L = LI->getLoopFor(BB))
+ if (Loop *L = LI.getLoopFor(BB))
return std::make_pair(L->getLoopPredecessor(), L->getHeader());
return std::pair<BasicBlock *, BasicBlock *>();
return true;
// Check conditions due to any @llvm.assume intrinsics.
- for (auto &AssumeVH : AC->assumptions()) {
+ for (auto &AssumeVH : AC.assumptions()) {
if (!AssumeVH)
continue;
auto *CI = cast<CallInst>(AssumeVH);
- if (!DT->dominates(CI, Latch->getTerminator()))
+ if (!DT.dominates(CI, Latch->getTerminator()))
continue;
if (isImpliedCond(Pred, LHS, RHS, CI->getArgOperand(0), false))
// If the loop is not reachable from the entry block, we risk running into an
// infinite loop as we walk up into the dom tree. These loops do not matter
// anyway, so we just return a conservative answer when we see them.
- if (!DT->isReachableFromEntry(L->getHeader()))
+ if (!DT.isReachableFromEntry(L->getHeader()))
return false;
- for (DomTreeNode *DTN = (*DT)[Latch], *HeaderDTN = (*DT)[L->getHeader()];
- DTN != HeaderDTN;
- DTN = DTN->getIDom()) {
+ for (DomTreeNode *DTN = DT[Latch], *HeaderDTN = DT[L->getHeader()];
+ DTN != HeaderDTN; DTN = DTN->getIDom()) {
assert(DTN && "should reach the loop header before reaching the root!");
// We're constructively (and conservatively) enumerating edges within the
// loop body that dominate the latch. The dominator tree better agree
// with us on this:
- assert(DT->dominates(DominatingEdge, Latch) && "should be!");
+ assert(DT.dominates(DominatingEdge, Latch) && "should be!");
if (isImpliedCond(Pred, LHS, RHS, Condition,
BB != ContinuePredicate->getSuccessor(0)))
}
// Check conditions due to any @llvm.assume intrinsics.
- for (auto &AssumeVH : AC->assumptions()) {
+ for (auto &AssumeVH : AC.assumptions()) {
if (!AssumeVH)
continue;
auto *CI = cast<CallInst>(AssumeVH);
- if (!DT->dominates(CI, L->getHeader()))
+ if (!DT.dominates(CI, L->getHeader()))
continue;
if (isImpliedCond(Pred, LHS, RHS, CI->getArgOperand(0), false))
// ScalarEvolution Class Implementation
//===----------------------------------------------------------------------===//
-ScalarEvolution::ScalarEvolution()
- : FunctionPass(ID), WalkingBEDominatingConds(false), ValuesAtScopes(64),
- LoopDispositions(64), BlockDispositions(64), FirstUnknown(nullptr) {
- initializeScalarEvolutionPass(*PassRegistry::getPassRegistry());
-}
-
-bool ScalarEvolution::runOnFunction(Function &F) {
- this->F = &F;
- AC = &getAnalysis<AssumptionCacheTracker>().getAssumptionCache(F);
- LI = &getAnalysis<LoopInfoWrapperPass>().getLoopInfo();
- TLI = &getAnalysis<TargetLibraryInfoWrapperPass>().getTLI();
- DT = &getAnalysis<DominatorTreeWrapperPass>().getDomTree();
- return false;
-}
-
-void ScalarEvolution::releaseMemory() {
+ScalarEvolution::ScalarEvolution(Function &F, TargetLibraryInfo &TLI,
+ AssumptionCache &AC, DominatorTree &DT,
+ LoopInfo &LI)
+ : F(F), TLI(TLI), AC(AC), DT(DT), LI(LI),
+ CouldNotCompute(new SCEVCouldNotCompute()),
+ WalkingBEDominatingConds(false), ValuesAtScopes(64), LoopDispositions(64),
+ BlockDispositions(64), FirstUnknown(nullptr) {}
+
+ScalarEvolution::ScalarEvolution(ScalarEvolution &&Arg)
+ : F(Arg.F), TLI(Arg.TLI), AC(Arg.AC), DT(Arg.DT), LI(Arg.LI),
+ CouldNotCompute(std::move(Arg.CouldNotCompute)),
+ ValueExprMap(std::move(Arg.ValueExprMap)),
+ WalkingBEDominatingConds(false),
+ BackedgeTakenCounts(std::move(Arg.BackedgeTakenCounts)),
+ ConstantEvolutionLoopExitValue(
+ std::move(Arg.ConstantEvolutionLoopExitValue)),
+ ValuesAtScopes(std::move(Arg.ValuesAtScopes)),
+ LoopDispositions(std::move(Arg.LoopDispositions)),
+ BlockDispositions(std::move(Arg.BlockDispositions)),
+ UnsignedRanges(std::move(Arg.UnsignedRanges)),
+ SignedRanges(std::move(Arg.SignedRanges)),
+ UniqueSCEVs(std::move(Arg.UniqueSCEVs)),
+ SCEVAllocator(std::move(Arg.SCEVAllocator)),
+ FirstUnknown(Arg.FirstUnknown) {
+ Arg.FirstUnknown = nullptr;
+}
+
+ScalarEvolution::~ScalarEvolution() {
// Iterate through all the SCEVUnknown instances and call their
// destructors, so that they release their references to their values.
for (SCEVUnknown *U = FirstUnknown; U; U = U->Next)
assert(PendingLoopPredicates.empty() && "isImpliedCond garbage");
assert(!WalkingBEDominatingConds && "isLoopBackedgeGuardedByCond garbage!");
-
- BackedgeTakenCounts.clear();
- ConstantEvolutionLoopExitValue.clear();
- ValuesAtScopes.clear();
- LoopDispositions.clear();
- BlockDispositions.clear();
- UnsignedRanges.clear();
- SignedRanges.clear();
- UniqueSCEVs.clear();
- SCEVAllocator.Reset();
-}
-
-void ScalarEvolution::getAnalysisUsage(AnalysisUsage &AU) const {
- AU.setPreservesAll();
- AU.addRequiredTransitive<AssumptionCacheTracker>();
- AU.addRequiredTransitive<LoopInfoWrapperPass>();
- AU.addRequiredTransitive<DominatorTreeWrapperPass>();
- AU.addRequiredTransitive<TargetLibraryInfoWrapperPass>();
}
bool ScalarEvolution::hasLoopInvariantBackedgeTakenCount(const Loop *L) {
OS << "\n";
}
-void ScalarEvolution::print(raw_ostream &OS, const Module *) const {
+void ScalarEvolution::print(raw_ostream &OS) const {
// ScalarEvolution's implementation of the print method is to print
// out SCEV values of all instructions that are interesting. Doing
// this potentially causes it to create new SCEV objects though,
ScalarEvolution &SE = *const_cast<ScalarEvolution *>(this);
OS << "Classifying expressions for: ";
- F->printAsOperand(OS, /*PrintType=*/false);
+ F.printAsOperand(OS, /*PrintType=*/false);
OS << "\n";
for (inst_iterator I = inst_begin(F), E = inst_end(F); I != E; ++I)
if (isSCEVable(I->getType()) && !isa<CmpInst>(*I)) {
SE.getSignedRange(SV).print(OS);
}
- const Loop *L = LI->getLoopFor((*I).getParent());
+ const Loop *L = LI.getLoopFor((*I).getParent());
const SCEV *AtUse = SE.getSCEVAtScope(SV, L);
if (AtUse != SV) {
}
OS << "Determining loop execution counts for: ";
- F->printAsOperand(OS, /*PrintType=*/false);
+ F.printAsOperand(OS, /*PrintType=*/false);
OS << "\n";
- for (LoopInfo::iterator I = LI->begin(), E = LI->end(); I != E; ++I)
+ for (LoopInfo::iterator I = LI.begin(), E = LI.end(); I != E; ++I)
PrintLoopInfo(OS, &SE, *I);
}
// produces the addrec's value is a PHI, and a PHI effectively properly
// dominates its entire containing block.
const SCEVAddRecExpr *AR = cast<SCEVAddRecExpr>(S);
- if (!DT->dominates(AR->getLoop()->getHeader(), BB))
+ if (!DT.dominates(AR->getLoop()->getHeader(), BB))
return DoesNotDominateBlock;
}
// FALL THROUGH into SCEVNAryExpr handling.
dyn_cast<Instruction>(cast<SCEVUnknown>(S)->getValue())) {
if (I->getParent() == BB)
return DominatesBlock;
- if (DT->properlyDominates(I->getParent(), BB))
+ if (DT.properlyDominates(I->getParent(), BB))
return ProperlyDominatesBlock;
return DoesNotDominateBlock;
}
}
}
-void ScalarEvolution::verifyAnalysis() const {
- if (!VerifySCEV)
- return;
-
+void ScalarEvolution::verify() const {
ScalarEvolution &SE = *const_cast<ScalarEvolution *>(this);
// Gather stringified backedge taken counts for all loops using SCEV's caches.
// FIXME: It would be much better to store actual values instead of strings,
// but SCEV pointers will change if we drop the caches.
VerifyMap BackedgeDumpsOld, BackedgeDumpsNew;
- for (LoopInfo::reverse_iterator I = LI->rbegin(), E = LI->rend(); I != E; ++I)
+ for (LoopInfo::reverse_iterator I = LI.rbegin(), E = LI.rend(); I != E; ++I)
getLoopBackedgeTakenCounts(*I, BackedgeDumpsOld, SE);
- // Gather stringified backedge taken counts for all loops without using
- // SCEV's caches.
- SE.releaseMemory();
- for (LoopInfo::reverse_iterator I = LI->rbegin(), E = LI->rend(); I != E; ++I)
- getLoopBackedgeTakenCounts(*I, BackedgeDumpsNew, SE);
+ // Gather stringified backedge taken counts for all loops using a fresh
+ // ScalarEvolution object.
+ ScalarEvolution SE2(F, TLI, AC, DT, LI);
+ for (LoopInfo::reverse_iterator I = LI.rbegin(), E = LI.rend(); I != E; ++I)
+ getLoopBackedgeTakenCounts(*I, BackedgeDumpsNew, SE2);
// Now compare whether they're the same with and without caches. This allows
// verifying that no pass changed the cache.
// TODO: Verify more things.
}
+
+char ScalarEvolutionAnalysis::PassID;
+
+ScalarEvolution ScalarEvolutionAnalysis::run(Function &F,
+ AnalysisManager<Function> *AM) {
+ return ScalarEvolution(F, AM->getResult<TargetLibraryAnalysis>(F),
+ AM->getResult<AssumptionAnalysis>(F),
+ AM->getResult<DominatorTreeAnalysis>(F),
+ AM->getResult<LoopAnalysis>(F));
+}
+
+PreservedAnalyses
+ScalarEvolutionPrinterPass::run(Function &F, AnalysisManager<Function> *AM) {
+ AM->getResult<ScalarEvolutionAnalysis>(F).print(OS);
+ return PreservedAnalyses::all();
+}
+
+INITIALIZE_PASS_BEGIN(ScalarEvolutionWrapperPass, "scalar-evolution",
+ "Scalar Evolution Analysis", false, true)
+INITIALIZE_PASS_DEPENDENCY(AssumptionCacheTracker)
+INITIALIZE_PASS_DEPENDENCY(LoopInfoWrapperPass)
+INITIALIZE_PASS_DEPENDENCY(DominatorTreeWrapperPass)
+INITIALIZE_PASS_DEPENDENCY(TargetLibraryInfoWrapperPass)
+INITIALIZE_PASS_END(ScalarEvolutionWrapperPass, "scalar-evolution",
+ "Scalar Evolution Analysis", false, true)
+char ScalarEvolutionWrapperPass::ID = 0;
+
+ScalarEvolutionWrapperPass::ScalarEvolutionWrapperPass() : FunctionPass(ID) {
+ initializeScalarEvolutionWrapperPassPass(*PassRegistry::getPassRegistry());
+}
+
+bool ScalarEvolutionWrapperPass::runOnFunction(Function &F) {
+ SE.reset(new ScalarEvolution(
+ F, getAnalysis<TargetLibraryInfoWrapperPass>().getTLI(),
+ getAnalysis<AssumptionCacheTracker>().getAssumptionCache(F),
+ getAnalysis<DominatorTreeWrapperPass>().getDomTree(),
+ getAnalysis<LoopInfoWrapperPass>().getLoopInfo()));
+ return false;
+}
+
+void ScalarEvolutionWrapperPass::releaseMemory() { SE.reset(); }
+
+void ScalarEvolutionWrapperPass::print(raw_ostream &OS, const Module *) const {
+ SE->print(OS);
+}
+
+void ScalarEvolutionWrapperPass::verifyAnalysis() const {
+ if (!VerifySCEV)
+ return;
+
+ SE->verify();
+}
+
+void ScalarEvolutionWrapperPass::getAnalysisUsage(AnalysisUsage &AU) const {
+ AU.setPreservesAll();
+ AU.addRequiredTransitive<AssumptionCacheTracker>();
+ AU.addRequiredTransitive<LoopInfoWrapperPass>();
+ AU.addRequiredTransitive<DominatorTreeWrapperPass>();
+ AU.addRequiredTransitive<TargetLibraryInfoWrapperPass>();
+}
projects / oota-llvm.git / blobdiff