======================
-LLVM 3.5 Release Notes
+LLVM 3.8 Release Notes
======================
.. contents::
:local:
-.. warning::
- These are in-progress notes for the upcoming LLVM 3.6 release. You may
- prefer the `LLVM 3.5 Release Notes <http://llvm.org/releases/3.5.0/docs
- /ReleaseNotes.html>`_.
-
Introduction
============
This document contains the release notes for the LLVM Compiler Infrastructure,
-release 3.6. Here we describe the status of LLVM, including major improvements
+release 3.8. Here we describe the status of LLVM, including major improvements
from the previous release, improvements in various subprojects of LLVM, and
some of the current users of the code. All LLVM releases may be downloaded
from the `LLVM releases web site <http://llvm.org/releases/>`_.
For more information about LLVM, including information about the latest
release, please check out the `main LLVM web site <http://llvm.org/>`_. If you
have questions or comments, the `LLVM Developer's Mailing List
-<http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev>`_ is a good place to send
+<http://lists.llvm.org/mailman/listinfo/llvm-dev>`_ is a good place to send
them.
-Note that if you are reading this file from a Subversion checkout or the main
-LLVM web page, this document applies to the *next* release, not the current
-one. To see the release notes for a specific release, please see the `releases
-page <http://llvm.org/releases/>`_.
-
Non-comprehensive list of changes in this release
=================================================
+* With this release, the minimum Windows version required for running LLVM is
+ Windows 7. Earlier versions, including Windows Vista and XP are no longer
+ supported.
+
+* With this release, the autoconf build system is deprecated. It will be removed
+ in the 3.9 release. Please migrate to using CMake. For more information see:
+ `Building LLVM with CMake <CMake.html>`_
+
+* The C API function LLVMLinkModules is deprecated. It will be removed in the
+ 3.9 release. Please migrate to LLVMLinkModules2. Unlike the old function the
+ new one
+
+ * Doesn't take an unused parameter.
+ * Destroys the source instead of only damaging it.
+ * Does not record a message. Use the diagnostic handler instead.
+
+* The C API functions LLVMParseBitcode, LLVMParseBitcodeInContext,
+ LLVMGetBitcodeModuleInContext and LLVMGetBitcodeModule have been deprecated.
+ They will be removed in 3.9. Please migrate to the versions with a 2 suffix.
+ Unlike the old ones the new ones do not record a diagnostic message. Use
+ the diagnostic handler instead.
+
+* The deprecated C APIs LLVMGetBitcodeModuleProviderInContext and
+ LLVMGetBitcodeModuleProvider have been removed.
+
+* The deprecated C APIs LLVMCreateExecutionEngine, LLVMCreateInterpreter,
+ LLVMCreateJITCompiler, LLVMAddModuleProvider and LLVMRemoveModuleProvider
+ have been removed.
+
+* With this release, the C API headers have been reorganized to improve build
+ time. Type specific declarations have been moved to Type.h, and error
+ handling routines have been moved to ErrorHandling.h. Both are included in
+ Core.h so nothing should change for projects directly including the headers,
+ but transitive dependencies may be affected.
+
+* llvm-ar now suports thin archives.
+
+* llvm doesn't produce .data.rel.ro.local or .data.rel sections anymore.
+
+* aliases to available_externally globals are now rejected by the verifier.
+
+* the IR Linker has been split into IRMover that moves bits from one module to
+ another and Linker proper that decides what to link.
+
+* Support for dematerializing has been dropped.
+
+* ``ilist_iterator<T>`` no longer has implicit conversions to and from ``T*``,
+ since ``ilist_iterator<T>`` may be pointing at the sentinel (which is usually
+ not of type ``T`` at all). To convert from an iterator ``I`` to a pointer,
+ use ``&*I``; to convert from a pointer ``P`` to an iterator, use
+ ``P->getIterator()``. Alternatively, explicit conversions via
+ ``static_cast<T>(U)`` are still available.
+
+* ``ilist_node<T>::getNextNode()`` and ``ilist_node<T>::getPrevNode()`` now
+ fail at compile time when the node cannot access its parent list.
+ Previously, when the sentinel was was an ``ilist_half_node<T>``, this API
+ could return the sentinal instead of ``nullptr``. Frustrated callers should
+ be updated to use ``iplist<T>::getNextNode(T*)`` instead. Alternatively, if
+ the node ``N`` is guaranteed not to be the last in the list, it is safe to
+ call ``&*++N->getIterator()`` directly.
.. NOTE
For small 1-3 sentence descriptions, just add an entry at the end of
functionality, or simply have a lot to talk about), see the `NOTE` below
for adding a new subsection.
-* Support for AuroraUX has been removed.
-
-* Added support for a `native object file-based bitcode wrapper format
- <BitCodeFormat.html#native-object-file>`_.
-
* ... next change ...
.. NOTE
Makes programs 10x faster by doing Special New Thing.
-Prefix data rework
-------------------
+Changes to the ARM Backend
+--------------------------
-The semantics of the ``prefix`` attribute have been changed. Users
-that want the previous ``prefix`` semantics should instead use
-``prologue``. To motivate this change, let's examine the primary
-usecases that these attributes aim to serve,
+ During this release ...
- 1. Code sanitization metadata (e.g. Clang's undefined behavior
- sanitizer)
- 2. Function hot-patching: Enable the user to insert ``nop`` operations
- at the beginning of the function which can later be safely replaced
- with a call to some instrumentation facility.
+Changes to the MIPS Target
+--------------------------
- 3. Language runtime metadata: Allow a compiler to insert data for
- use by the runtime during execution. GHC is one example of a
- compiler that needs this functionality for its
- tables-next-to-code functionality.
+During this release the MIPS target has:
+
+* Significantly extended support for the Integrated Assembler. See below for
+ more information
+* Added support for the ``P5600`` processor.
+* Added support for the ``interrupt`` attribute for MIPS32R2 and later. This
+ attribute will generate a function which can be used as a interrupt handler
+ on bare metal MIPS targets using the static relocation model.
+* Added support for the ``ERETNC`` instruction found in MIPS32R5 and later.
+* Added support for OpenCL. See http://portablecl.org/.
+
+ * Address spaces 1 to 255 are now reserved for software use and conversions
+ between them are no-op casts.
+
+* Removed the ``mips16`` value for the -mcpu option since it is an :abbr:`ASE
+ (Application Specific Extension)` and not a processor. If you were using this,
+ please specify another CPU and use ``-mips16`` to enable MIPS16.
+* Removed ``copy_u.w`` from 32-bit MSA and ``copy_u.d`` from 64-bit MSA since
+ they have been removed from the MSA specification due to forward compatibility
+ issues. For example, 32-bit MSA code containing ``copy_u.w`` would behave
+ differently on a 64-bit processor supporting MSA. The corresponding intrinsics
+ are still available and may expand to ``copy_s.[wd]`` where this is
+ appropriate for forward compatibility purposes.
+* Relaxed the ``-mnan`` option to allow ``-mnan=2008`` on MIPS32R2/MIPS64R2 for
+ compatibility with GCC.
+* Made MIPS64R6 the default CPU for 64-bit Android triples.
+
+The MIPS target has also fixed various bugs including the following notable
+fixes:
+
+* Fixed reversed operands on ``mthi``/``mtlo`` in the DSP :abbr:`ASE
+ (Application Specific Extension)`.
+* The code generator no longer uses ``jal`` for calls to absolute immediate
+ addresses.
+* Disabled fast instruction selection on MIPS32R6 and MIPS64R6 since this is not
+ yet supported.
+* Corrected addend for ``R_MIPS_HI16`` and ``R_MIPS_PCHI16`` in MCJIT
+* The code generator no longer crashes when handling subregisters of an 64-bit
+ FPU register with undefined value.
+* The code generator no longer attempts to use ``$zero`` for operands that do
+ not permit ``$zero``.
+* Corrected the opcode used for ``ll``/``sc`` when using MIPS32R6/MIPS64R6 and
+ the Integrated Assembler.
+* Added support for atomic load and atomic store.
+* Corrected debug info when dynamically re-aligning the stack.
+
+Integrated Assembler
+^^^^^^^^^^^^^^^^^^^^
+We have made a large number of improvements to the integrated assembler for
+MIPS. In this release, the integrated assembler isn't quite production-ready
+since there are a few known issues related to bare-metal support, checking
+immediates on instructions, and the N32/N64 ABI's. However, the current support
+should be sufficient for many users of the O32 ABI, particularly those targeting
+MIPS32 on Linux or bare-metal MIPS32.
+
+If you would like to try the integrated assembler, please use
+``-fintegrated-as``.
-Previously ``prefix`` served cases (1) and (2) quite well by allowing the user
-to introduce arbitrary data at the entrypoint but before the function
-body. Case (3), however, was poorly handled by this approach as it
-required that prefix data was valid executable code.
+Changes to the PowerPC Target
+-----------------------------
-In this release the concept of prefix data has been redefined to be
-data which occurs immediately before the function entrypoint (i.e. the
-symbol address). Since prefix data now occurs before the function
-entrypoint, there is no need for the data to be valid code.
+ During this release ...
-The previous notion of prefix data now goes under the name "prologue
-data" to emphasize its duality with the function epilogue.
-The intention here is to handle cases (1) and (2) with prologue data and
-case (3) with prefix data. See the language reference for further details
-on the semantics of these attributes.
+Changes to the X86 Target
+-----------------------------
-This refactoring arose out of discussions_ with Reid Kleckner in
-response to a proposal to introduce the notion of symbol offsets to
-enable handling of case (3).
+ During this release ...
-.. _discussions: http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-May/073235.html
+* TLS is enabled for Cygwin as emutls.
-Changes to the ARM Backend
---------------------------
+Changes to the OCaml bindings
+-----------------------------
During this release ...
+* The ocaml function link_modules has been replaced with link_modules' which
+ uses LLVMLinkModules2.
-Changes to the MIPS Target
---------------------------
-
-During this release ...
-
-Changes to the PowerPC Target
------------------------------
-
-During this release ...
-External Open Source Projects Using LLVM 3.6
+External Open Source Projects Using LLVM 3.8
============================================
An exciting aspect of LLVM is that it is used as an enabling technology for
a lot of other language and tools projects. This section lists some of the
-projects that have already been updated to work with LLVM 3.6.
+projects that have already been updated to work with LLVM 3.8.
+
+LDC - the LLVM-based D compiler
+-------------------------------
+
+`D <http://dlang.org>`_ is a language with C-like syntax and static typing. It
+pragmatically combines efficiency, control, and modeling power, with safety and
+programmer productivity. D supports powerful concepts like Compile-Time Function
+Execution (CTFE) and Template Meta-Programming, provides an innovative approach
+to concurrency and offers many classical paradigms.
-* A project
+`LDC <http://wiki.dlang.org/LDC>`_ uses the frontend from the reference compiler
+combined with LLVM as backend to produce efficient native code. LDC targets
+x86/x86_64 systems like Linux, OS X and Windows and also PowerPC (32/64 bit)
+and ARM. Ports to other architectures like AArch64 and MIPS64 are underway.
Additional Information
projects / oota-llvm.git / blobdiff