can be used on global variables to suppress mangling.
#. Unnamed values are represented as an unsigned numeric value with
their prefix. For example, ``%12``, ``@2``, ``%44``.
-#. Constants, which are described in the section Constants_ below.
+#. Constants, which are described in the section Constants_ below.
LLVM requires that values start with a prefix for two reasons: Compilers
don't need to worry about name clashes with reserved words, and the set
; Definition of main function
define i32 @main() { ; i32()*
; Convert [13 x i8]* to i8 *...
- %cast210 = getelementptr [13 x i8]* @.str, i64 0, i64 0
+ %cast210 = getelementptr [13 x i8], [13 x i8]* @.str, i64 0, i64 0
; Call puts function to write out the string to stdout.
call i32 @puts(i8* %cast210)
(``STB_LOCAL`` in the case of ELF) in the object file. This
corresponds to the notion of the '``static``' keyword in C.
``available_externally``
- Globals with "``available_externally``" linkage are never emitted
- into the object file corresponding to the LLVM module. They exist to
- allow inlining and other optimizations to take place given knowledge
- of the definition of the global, which is known to be somewhere
- outside the module. Globals with ``available_externally`` linkage
- are allowed to be discarded at will, and are otherwise the same as
- ``linkonce_odr``. This linkage type is only allowed on definitions,
- not declarations.
+ Globals with "``available_externally``" linkage are never emitted into
+ the object file corresponding to the LLVM module. From the linker's
+ perspective, an ``available_externally`` global is equivalent to
+ an external declaration. They exist to allow inlining and other
+ optimizations to take place given knowledge of the definition of the
+ global, which is known to be somewhere outside the module. Globals
+ with ``available_externally`` linkage are allowed to be discarded at
+ will, and allow inlining and other optimizations. This linkage type is
+ only allowed on definitions, not declarations.
``linkonce``
Globals with "``linkonce``" linkage are merged with other globals of
the same name when linkage occurs. This can be used to implement
Some languages allow differing globals to be merged, such as two
functions with different semantics. Other languages, such as
``C++``, ensure that only equivalent globals are ever merged (the
- "one definition rule" --- "ODR"). Such languages can use the
+ "one definition rule" --- "ODR"). Such languages can use the
``linkonce_odr`` and ``weak_odr`` linkage types to indicate that the
global will only be merged with equivalent globals. These linkage
types are otherwise the same as their non-``odr`` versions.
"``anyregcc``" - Dynamic calling convention for code patching
This is a special convention that supports patching an arbitrary code
sequence in place of a call site. This convention forces the call
- arguments into registers but allows them to be dynamcially
+ arguments into registers but allows them to be dynamically
allocated. This can currently only be used with calls to
llvm.experimental.patchpoint because only this intrinsic records
the location of its arguments in a side table. See :doc:`StackMaps`.
"``preserve_mostcc``" - The `PreserveMost` calling convention
- This calling convention attempts to make the code in the caller as little
- intrusive as possible. This calling convention behaves identical to the `C`
+ This calling convention attempts to make the code in the caller as
+ unintrusive as possible. This convention behaves identically to the `C`
calling convention on how arguments and return values are passed, but it
uses a different set of caller/callee-saved registers. This alleviates the
burden of saving and recovering a large register set before and after the
This calling convention, like the `PreserveMost` calling convention, will be
used by a future version of the ObjectiveC runtime and should be considered
experimental at this time.
+"``cxx_fast_tlscc``" - The `CXX_FAST_TLS` calling convention for access functions
+ Clang generates an access function to access C++-style TLS. The access
+ function generally has an entry block, an exit block and an initialization
+ block that is run at the first time. The entry and exit blocks can access
+ a few TLS IR variables, each access will be lowered to a platform-specific
+ sequence.
+
+ This calling convention aims to minimize overhead in the caller by
+ preserving as many registers as possible (all the registers that are
+ perserved on the fast path, composed of the entry and exit blocks).
+
+ This calling convention behaves identical to the `C` calling convention on
+ how arguments and return values are passed, but it uses a different set of
+ caller/callee-saved registers.
+
+ Given that each platform has its own lowering sequence, hence its own set
+ of preserved registers, we can't use the existing `PreserveMost`.
+
+ - On X86-64 the callee preserves all general purpose registers, except for
+ RDI and RAX.
"``cc <n>``" - Numbered convention
Any calling convention may be specified by number, allowing
target-specific calling conventions to be used. Target specific
be used. The target may choose a different TLS model if the specified
model is not supported, or if a better choice of model can be made.
-A model can also be specified in a alias, but then it only governs how
+A model can also be specified in an alias, but then it only governs how
the alias is accessed. It will not have any effect in the aliasee.
+For platforms without linker support of ELF TLS model, the -femulated-tls
+flag can be used to generate GCC compatible emulated TLS code.
+
.. _namedtypes:
Structure Types
---------------
LLVM IR allows you to specify both "identified" and "literal" :ref:`structure
-types <t_struct>`. Literal types are uniqued structurally, but identified types
-are never uniqued. An :ref:`opaque structural type <t_opaque>` can also be used
+types <t_struct>`. Literal types are uniqued structurally, but identified types
+are never uniqued. An :ref:`opaque structural type <t_opaque>` can also be used
to forward declare a type that is not yet available.
-An example of a identified structure specification is:
+An example of an identified structure specification is:
.. code-block:: llvm
%mytype = type { %mytype*, i32 }
-Prior to the LLVM 3.0 release, identified types were structurally uniqued. Only
+Prior to the LLVM 3.0 release, identified types were structurally uniqued. Only
literal types are uniqued in recent versions of LLVM.
.. _globalvars:
By default, global initializers are optimized by assuming that global
variables defined within the module are not modified from their
-initial values before the start of the global initializer. This is
+initial values before the start of the global initializer. This is
true even for variables potentially accessible from outside the
module, including those with external linkage or appearing in
``@llvm.used`` or dllexported variables. This assumption may be suppressed
an optional section, an optional alignment,
an optional :ref:`comdat <langref_comdats>`,
an optional :ref:`garbage collector name <gc>`, an optional :ref:`prefix <prefixdata>`,
-an optional :ref:`prologue <prologuedata>`, an opening
-curly brace, a list of basic blocks, and a closing curly brace.
+an optional :ref:`prologue <prologuedata>`,
+an optional :ref:`personality <personalityfn>`,
+an optional list of attached :ref:`metadata <metadata>`,
+an opening curly brace, a list of basic blocks, and a closing curly brace.
LLVM function declarations consist of the "``declare``" keyword, an
optional :ref:`linkage type <linkage>`, an optional :ref:`visibility
[cconv] [ret attrs]
<ResultType> @<FunctionName> ([argument list])
[unnamed_addr] [fn Attrs] [section "name"] [comdat [($name)]]
- [align N] [gc] [prefix Constant] [prologue Constant] { ... }
+ [align N] [gc] [prefix Constant] [prologue Constant]
+ [personality Constant] (!name !N)* { ... }
-The argument list is a comma seperated sequence of arguments where each
-argument is of the following form
+The argument list is a comma separated sequence of arguments where each
+argument is of the following form:
Syntax::
Syntax::
- @<Name> = [Linkage] [Visibility] [DLLStorageClass] [ThreadLocal] [unnamed_addr] alias <AliaseeTy> @<Aliasee>
+ @<Name> = [Linkage] [Visibility] [DLLStorageClass] [ThreadLocal] [unnamed_addr] alias <AliaseeTy>
, <AliaseeTy>* @<Aliasee>
The linkage must be one of ``private``, ``internal``, ``linkonce``, ``weak``,
``linkonce_odr``, ``weak_odr``, ``external``. Note that some system linkers
Comdat IR provides access to COFF and ELF object file COMDAT functionality.
-Comdats have a name which represents the COMDAT key. All global objects that
+Comdats have a name which represents the COMDAT key. All global objects that
specify this key will only end up in the final object file if the linker chooses
-that key over some other key. Aliases are placed in the same COMDAT that their
+that key over some other key. Aliases are placed in the same COMDAT that their
aliasee computes to, if any.
Comdats have a selection kind to provide input on how the linker should
@g2 = global i32 42, section "sec", comdat($bar)
From the object file perspective, this requires the creation of two sections
-with the same name. This is necessary because both globals belong to different
+with the same name. This is necessary because both globals belong to different
COMDAT groups and COMDATs, at the object file level, are represented by
sections.
-Note that certain IR constructs like global variables and functions may create
-COMDATs in the object file in addition to any which are specified using COMDAT
-IR. This arises, for example, when a global variable has linkonce_odr linkage.
+Note that certain IR constructs like global variables and functions may
+create COMDATs in the object file in addition to any which are specified using
+COMDAT IR. This arises when the code generator is configured to emit globals
+in individual sections (e.g. when `-data-sections` or `-function-sections`
+is supplied to `llc`).
.. _namedmetadatastructure:
nodes <metadata>` (but not metadata strings) are the only valid
operands for a named metadata.
+#. Named metadata are represented as a string of characters with the
+ metadata prefix. The rules for metadata names are the same as for
+ identifiers, but quoted names are not allowed. ``"\xx"`` type escapes
+ are still valid, which allows any character to be part of a name.
+
Syntax::
; Some unnamed metadata nodes, which are referenced by the named metadata.
the callee (for a return value).
``inreg``
This indicates that this parameter or return value should be treated
- in a special target-dependent fashion during while emitting code for
+ in a special target-dependent fashion while emitting code for
a function call or return (usually, by putting it in a register as
opposed to memory, though some targets use it to distinguish between
two different kinds of registers). Use of this attribute is
``inalloca``
The ``inalloca`` argument attribute allows the caller to take the
- address of outgoing stack arguments. An ``inalloca`` argument must
+ address of outgoing stack arguments. An ``inalloca`` argument must
be a pointer to stack memory produced by an ``alloca`` instruction.
The alloca, or argument allocation, must also be tagged with the
- inalloca keyword. Only the last argument may have the ``inalloca``
+ inalloca keyword. Only the last argument may have the ``inalloca``
attribute, and that argument is guaranteed to be passed in memory.
An argument allocation may be used by a call at most once because
- the call may deallocate it. The ``inalloca`` attribute cannot be
+ the call may deallocate it. The ``inalloca`` attribute cannot be
used in conjunction with other attributes that affect argument
- storage, like ``inreg``, ``nest``, ``sret``, or ``byval``. The
+ storage, like ``inreg``, ``nest``, ``sret``, or ``byval``. The
``inalloca`` attribute also disables LLVM's implicit lowering of
large aggregate return values, which means that frontend authors
must lower them with ``sret`` pointers.
When the call site is reached, the argument allocation must have
been the most recent stack allocation that is still live, or the
- results are undefined. It is possible to allocate additional stack
+ results are undefined. It is possible to allocate additional stack
space after an argument allocation and before its call site, but it
must be cleared off with :ref:`llvm.stackrestore
<int_stackrestore>`.
This indicates that the parameter or return pointer is not null. This
attribute may only be applied to pointer typed parameters. This is not
checked or enforced by LLVM, the caller must ensure that the pointer
- passed in is non-null, or the callee must ensure that the returned pointer
+ passed in is non-null, or the callee must ensure that the returned pointer
is non-null.
``dereferenceable(<n>)``
array), however ``dereferenceable(<n>)`` does imply ``nonnull`` in
``addrspace(0)`` (which is the default address space).
+``dereferenceable_or_null(<n>)``
+ This indicates that the parameter or return value isn't both
+ non-null and non-dereferenceable (up to ``<n>`` bytes) at the same
+ time. All non-null pointers tagged with
+ ``dereferenceable_or_null(<n>)`` are ``dereferenceable(<n>)``.
+ For address space 0 ``dereferenceable_or_null(<n>)`` implies that
+ a pointer is exactly one of ``dereferenceable(<n>)`` or ``null``,
+ and in other address spaces ``dereferenceable_or_null(<n>)``
+ implies that a pointer is at least one of ``dereferenceable(<n>)``
+ or ``null`` (i.e. it may be both ``null`` and
+ ``dereferenceable(<n>)``). This attribute may only be applied to
+ pointer typed parameters.
+
.. _gc:
Garbage Collector Strategy Names
define void @f() gc "name" { ... }
-The supported values of *name* includes those :ref:`built in to LLVM
-<builtin-gc-strategies>` and any provided by loaded plugins. Specifying a GC
-strategy will cause the compiler to alter its output in order to support the
-named garbage collection algorithm. Note that LLVM itself does not contain a
+The supported values of *name* includes those :ref:`built in to LLVM
+<builtin-gc-strategies>` and any provided by loaded plugins. Specifying a GC
+strategy will cause the compiler to alter its output in order to support the
+named garbage collection algorithm. Note that LLVM itself does not contain a
garbage collector, this functionality is restricted to generating machine code
-which can interoperate with a collector provided externally.
+which can interoperate with a collector provided externally.
.. _prefixdata:
To access the data for a given function, a program may bitcast the
function pointer to a pointer to the constant's type and dereference
-index -1. This implies that the IR symbol points just past the end of
+index -1. This implies that the IR symbol points just past the end of
the prefix data. For instance, take the example of a function annotated
with a single ``i32``,
.. code-block:: llvm
- %0 = bitcast *void () @f to *i32
- %a = getelementptr inbounds *i32 %0, i32 -1
- %b = load i32* %a
+ %0 = bitcast void* () @f to i32*
+ %a = getelementptr inbounds i32, i32* %0, i32 -1
+ %b = load i32, i32* %a
Prefix data is laid out as if it were an initializer for a global variable
-of the prefix data's type. The function will be placed such that the
+of the prefix data's type. The function will be placed such that the
beginning of the prefix data is aligned. This means that if the size
of the prefix data is not a multiple of the alignment size, the
function's entrypoint will not be aligned. If alignment of the
function's entrypoint is desired, padding must be added to the prefix
data.
-A function may have prefix data but no body. This has similar semantics
+A function may have prefix data but no body. This has similar semantics
to the ``available_externally`` linkage in that the data may be used by the
optimizers but will not be emitted in the object file.
function hot-patching and instrumentation.
To maintain the semantics of ordinary function calls, the prologue data must
-have a particular format. Specifically, it must begin with a sequence of
+have a particular format. Specifically, it must begin with a sequence of
bytes which decode to a sequence of machine instructions, valid for the
module's target, which transfer control to the point immediately succeeding
-the prologue data, without performing any other visible action. This allows
+the prologue data, without performing any other visible action. This allows
the inliner and other passes to reason about the semantics of the function
-definition without needing to reason about the prologue data. Obviously this
+definition without needing to reason about the prologue data. Obviously this
makes the format of the prologue data highly target dependent.
A trivial example of valid prologue data for the x86 architecture is ``i8 144``,
define void @f() prologue %0 <{ i8 235, i8 8, i8* @md}> { ... }
-A function may have prologue data but no body. This has similar semantics
+A function may have prologue data but no body. This has similar semantics
to the ``available_externally`` linkage in that the data may be used by the
optimizers but will not be emitted in the object file.
+.. _personalityfn:
+
+Personality Function
+--------------------
+
+The ``personality`` attribute permits functions to specify what function
+to use for exception handling.
+
.. _attrgrp:
Attribute Groups
computing edge weights, basic blocks post-dominated by a cold
function call are also considered to be cold; and, thus, given low
weight.
+``convergent``
+ This attribute indicates that the callee is dependent on a convergent
+ thread execution pattern under certain parallel execution models.
+ Transformations that are execution model agnostic may not make the execution
+ of a convergent operation control dependent on any additional values.
``inlinehint``
This attribute indicates that the source code contained a hint that
inlining this function is desirable (such as the "inline" keyword in
This function attribute indicates that the function never returns
normally. This produces undefined behavior at runtime if the
function ever does dynamically return.
+``norecurse``
+ This function attribute indicates that the function does not call itself
+ either directly or indirectly down any possible call path. This produces
+ undefined behavior at runtime if the function ever does recurse.
``nounwind``
This function attribute indicates that the function never raises an
exception. If the function does raise an exception, its runtime
that are recognized by LLVM to handle asynchronous exceptions, such
as SEH, will still provide their implementation defined semantics.
``optnone``
- This function attribute indicates that the function is not optimized
- by any optimization or code generator passes with the
- exception of interprocedural optimization passes.
+ This function attribute indicates that most optimization passes will skip
+ this function, with the exception of interprocedural optimization passes.
+ Code generation defaults to the "fast" instruction selector.
This attribute cannot be used together with the ``alwaysinline``
attribute; this attribute is also incompatible
with the ``minsize`` attribute and the ``optsize`` attribute.
On an argument, this attribute indicates that the function does not write
through this pointer argument, even though it may write to the memory that
the pointer points to.
+``argmemonly``
+ This attribute indicates that the only memory accesses inside function are
+ loads and stores from objects pointed to by its pointer-typed arguments,
+ with arbitrary offsets. Or in other words, all memory operations in the
+ function can refer to memory only using pointers based on its function
+ arguments.
+ Note that ``argmemonly`` can be used together with ``readonly`` attribute
+ in order to specify that function reads only from its arguments.
``returns_twice``
This attribute indicates that this function can return twice. The C
``setjmp`` is an example of such a function. The compiler disables
some optimizations (like tail calls) in the caller of these
functions.
+``safestack``
+ This attribute indicates that
+ `SafeStack <http://clang.llvm.org/docs/SafeStack.html>`_
+ protection is enabled for this function.
+
+ If a function that has a ``safestack`` attribute is inlined into a
+ function that doesn't have a ``safestack`` attribute or which has an
+ ``ssp``, ``sspstrong`` or ``sspreq`` attribute, then the resulting
+ function will have a ``safestack`` attribute.
``sanitize_address``
This attribute indicates that AddressSanitizer checks
(dynamic address safety analysis) are enabled for this function.
``sspstrong``
This attribute indicates that the function should emit a stack smashing
protector. This attribute causes a strong heuristic to be used when
- determining if a function needs stack protectors. The strong heuristic
+ determining if a function needs stack protectors. The strong heuristic
will enable protectors for functions with:
- Arrays of any size and type
If a function that has an ``sspstrong`` attribute is inlined into a
function that doesn't have an ``sspstrong`` attribute, then the
resulting function will have an ``sspstrong`` attribute.
+``"thunk"``
+ This attribute indicates that the function will delegate to some other
+ function with a tail call. The prototype of a thunk should not be used for
+ optimization purposes. The caller is expected to cast the thunk prototype to
+ match the thunk target prototype.
``uwtable``
This attribute indicates that the ABI being targeted requires that
- an unwind table entry be produce for this function even if we can
+ an unwind table entry be produced for this function even if we can
show that no exceptions passes by it. This is normally the case for
the ELF x86-64 abi, but it can be disabled for some compilation
units.
+
+.. _opbundles:
+
+Operand Bundles
+---------------
+
+Note: operand bundles are a work in progress, and they should be
+considered experimental at this time.
+
+Operand bundles are tagged sets of SSA values that can be associated
+with certain LLVM instructions (currently only ``call`` s and
+``invoke`` s). In a way they are like metadata, but dropping them is
+incorrect and will change program semantics.
+
+Syntax::
+
+ operand bundle set ::= '[' operand bundle (, operand bundle )* ']'
+ operand bundle ::= tag '(' [ bundle operand ] (, bundle operand )* ')'
+ bundle operand ::= SSA value
+ tag ::= string constant
+
+Operand bundles are **not** part of a function's signature, and a
+given function may be called from multiple places with different kinds
+of operand bundles. This reflects the fact that the operand bundles
+are conceptually a part of the ``call`` (or ``invoke``), not the
+callee being dispatched to.
+
+Operand bundles are a generic mechanism intended to support
+runtime-introspection-like functionality for managed languages. While
+the exact semantics of an operand bundle depend on the bundle tag,
+there are certain limitations to how much the presence of an operand
+bundle can influence the semantics of a program. These restrictions
+are described as the semantics of an "unknown" operand bundle. As
+long as the behavior of an operand bundle is describable within these
+restrictions, LLVM does not need to have special knowledge of the
+operand bundle to not miscompile programs containing it.
+
+- The bundle operands for an unknown operand bundle escape in unknown
+ ways before control is transferred to the callee or invokee.
+- Calls and invokes with operand bundles have unknown read / write
+ effect on the heap on entry and exit (even if the call target is
+ ``readnone`` or ``readonly``), unless they're overriden with
+ callsite specific attributes.
+- An operand bundle at a call site cannot change the implementation
+ of the called function. Inter-procedural optimizations work as
+ usual as long as they take into account the first two properties.
+
+More specific types of operand bundles are described below.
+
+Deoptimization Operand Bundles
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Deoptimization operand bundles are characterized by the ``"deopt"``
+operand bundle tag. These operand bundles represent an alternate
+"safe" continuation for the call site they're attached to, and can be
+used by a suitable runtime to deoptimize the compiled frame at the
+specified call site. There can be at most one ``"deopt"`` operand
+bundle attached to a call site. Exact details of deoptimization is
+out of scope for the language reference, but it usually involves
+rewriting a compiled frame into a set of interpreted frames.
+
+From the compiler's perspective, deoptimization operand bundles make
+the call sites they're attached to at least ``readonly``. They read
+through all of their pointer typed operands (even if they're not
+otherwise escaped) and the entire visible heap. Deoptimization
+operand bundles do not capture their operands except during
+deoptimization, in which case control will not be returned to the
+compiled frame.
+
+The inliner knows how to inline through calls that have deoptimization
+operand bundles. Just like inlining through a normal call site
+involves composing the normal and exceptional continuations, inlining
+through a call site with a deoptimization operand bundle needs to
+appropriately compose the "safe" deoptimization continuation. The
+inliner does this by prepending the parent's deoptimization
+continuation to every deoptimization continuation in the inlined body.
+E.g. inlining ``@f`` into ``@g`` in the following example
+
+.. code-block:: llvm
+
+ define void @f() {
+ call void @x() ;; no deopt state
+ call void @y() [ "deopt"(i32 10) ]
+ call void @y() [ "deopt"(i32 10), "unknown"(i8* null) ]
+ ret void
+ }
+
+ define void @g() {
+ call void @f() [ "deopt"(i32 20) ]
+ ret void
+ }
+
+will result in
+
+.. code-block:: llvm
+
+ define void @g() {
+ call void @x() ;; still no deopt state
+ call void @y() [ "deopt"(i32 20, i32 10) ]
+ call void @y() [ "deopt"(i32 20, i32 10), "unknown"(i8* null) ]
+ ret void
+ }
+
+It is the frontend's responsibility to structure or encode the
+deoptimization state in a way that syntactically prepending the
+caller's deoptimization state to the callee's deoptimization state is
+semantically equivalent to composing the caller's deoptimization
+continuation after the callee's deoptimization continuation.
+
.. _moduleasm:
Module-Level Inline Assembly
characters. The escape sequence used is simply "\\xx" where "xx" is the
two digit hex code for the number.
-The inline asm code is simply printed to the machine code .s file when
-assembly code is generated.
+Note that the assembly string *must* be parseable by LLVM's integrated assembler
+(unless it is disabled), even when emitting a ``.s`` file.
.. _langref_datalayout:
``p[n]:<size>:<abi>:<pref>``
This specifies the *size* of a pointer and its ``<abi>`` and
``<pref>``\erred alignments for address space ``n``. All sizes are in
- bits. The address space, ``n`` is optional, and if not specified,
- denotes the default address space 0. The value of ``n`` must be
+ bits. The address space, ``n``, is optional, and if not specified,
+ denotes the default address space 0. The value of ``n`` must be
in the range [1,2^23).
``i<size>:<abi>:<pref>``
This specifies the alignment for an integer type of a given bit
symbols get a ``_`` prefix.
* ``w``: Windows COFF prefix: Similar to Mach-O, but stdcall and fastcall
functions also get a suffix based on the frame size.
+ * ``x``: Windows x86 COFF prefix: Similar to Windows COFF, but use a ``_``
+ prefix for ``__cdecl`` functions.
``n<size1>:<size2>:<size3>...``
This specifies a set of native integer widths for the target CPU in
bits. For example, it might contain ``n32`` for 32-bit PowerPC,
Instead, if specified, the target data layout is required to match what
the ultimate *code generator* expects. This string is used by the
mid-level optimizers to improve code, and this only works if it matches
-what the ultimate code generator uses. If you would like to generate IR
-that does not embed this target-specific detail into the IR, then you
-don't have to specify the string. This will disable some optimizations
-that require precise layout information, but this also prevents those
-optimizations from introducing target specificity into the IR.
+what the ultimate code generator uses. There is no way to generate IR
+that does not embed this target-specific detail into the IR. If you
+don't specify the string, the default specifications will be used to
+generate a Data Layout and the optimization phases will operate
+accordingly and introduce target specificity into the IR with respect to
+these default specifications.
.. _langref_triple:
following rules:
- A pointer value formed from a ``getelementptr`` operation is *based*
- on the first operand of the ``getelementptr``.
+ on the first value operand of the ``getelementptr``.
- The result value of a ``bitcast`` is *based* on the operand of the
``bitcast``.
- A pointer value formed by an ``inttoptr`` is *based* on all pointer
this holds for an l-value of volatile primitive type with native
hardware support, but not necessarily for aggregate types. The
frontend upholds these expectations, which are intentionally
- unspecified in the IR. The rules above ensure that IR transformation
+ unspecified in the IR. The rules above ensure that IR transformations
do not violate the frontend's contract with the language.
.. _memmodel:
LLVM IR floating-point binary ops (:ref:`fadd <i_fadd>`,
:ref:`fsub <i_fsub>`, :ref:`fmul <i_fmul>`, :ref:`fdiv <i_fdiv>`,
-:ref:`frem <i_frem>`) have the following flags that can be set to enable
-otherwise unsafe floating point operations
+:ref:`frem <i_frem>`, :ref:`fcmp <i_fcmp>`) have the following flags that can
+be set to enable otherwise unsafe floating point operations
``nnan``
No NaNs - Allow optimizations to assume the arguments and result are not
-------------------------
Use-list directives encode the in-memory order of each use-list, allowing the
-order to be recreated. ``<order-indexes>`` is a comma-separated list of
-indexes that are assigned to the referenced value's uses. The referenced
+order to be recreated. ``<order-indexes>`` is a comma-separated list of
+indexes that are assigned to the referenced value's uses. The referenced
value's use-list is immediately sorted by these indexes.
-Use-list directives may appear at function scope or global scope. They are not
-instructions, and have no effect on the semantics of the IR. When they're at
+Use-list directives may appear at function scope or global scope. They are not
+instructions, and have no effect on the semantics of the IR. When they're at
function scope, they must appear after the terminator of the final basic block.
If basic blocks have their address taken via ``blockaddress()`` expressions,
...where '``<parameter list>``' is a comma-separated list of type
specifiers. Optionally, the parameter list may include a type ``...``, which
-indicates that the function takes a variable number of arguments. Variable
+indicates that the function takes a variable number of arguments. Variable
argument functions can access their arguments with the :ref:`variable argument
-handling intrinsic <int_varargs>` functions. '``<returntype>``' is any type
+handling intrinsic <int_varargs>` functions. '``<returntype>``' is any type
except :ref:`label <t_label>` and :ref:`metadata <t_metadata>`.
:Examples:
label
+.. _t_token:
+
+Token Type
+^^^^^^^^^^
+
+:Overview:
+
+The token type is used when a value is associated with an instruction
+but all uses of the value must not attempt to introspect or obscure it.
+As such, it is not appropriate to have a :ref:`phi <i_phi>` or
+:ref:`select <i_select>` of type token.
+
+:Syntax:
+
+::
+
+ token
+
+
+
.. _t_metadata:
Metadata Type
**Null pointer constants**
The identifier '``null``' is recognized as a null pointer constant
and must be of :ref:`pointer type <t_pointer>`.
+**Token constants**
+ The identifier '``none``' is recognized as an empty token constant
+ and must be of :ref:`token type <t_token>`.
The one non-intuitive notation for constants is the hexadecimal form of
floating point constants. For example, the form
having to print large zero initializers (e.g. for large arrays) and
is always exactly equivalent to using explicit zero initializers.
**Metadata node**
- A metadata node is a constant tuple without types. For example:
- "``!{!0, !{!2, !0}, !"test"}``". Metadata can reference constant values,
+ A metadata node is a constant tuple without types. For example:
+ "``!{!0, !{!2, !0}, !"test"}``". Metadata can reference constant values,
for example: "``!{!0, i32 0, i8* @global, i64 (i64)* @function, !"str"}``".
Unlike other typed constants that are meant to be interpreted as part of
the instruction stream, metadata is a place to attach additional
entry:
%poison = sub nuw i32 0, 1 ; Results in a poison value.
%still_poison = and i32 %poison, 0 ; 0, but also poison.
- %poison_yet_again = getelementptr i32* @h, i32 %still_poison
+ %poison_yet_again = getelementptr i32, i32* @h, i32 %still_poison
store i32 0, i32* %poison_yet_again ; memory at @h[0] is poisoned
store i32 %poison, i32* @g ; Poison value stored to memory.
- %poison2 = load i32* @g ; Poison value loaded back from memory.
+ %poison2 = load i32, i32* @g ; Poison value loaded back from memory.
store volatile i32 %poison, i32* @g ; External observation; undefined behavior.
%narrowaddr = bitcast i32* @g to i16*
%wideaddr = bitcast i32* @g to i64*
- %poison3 = load i16* %narrowaddr ; Returns a poison value.
- %poison4 = load i64* %wideaddr ; Returns a poison value.
+ %poison3 = load i16, i16* %narrowaddr ; Returns a poison value.
+ %poison4 = load i64, i64* %wideaddr ; Returns a poison value.
%cmp = icmp slt i32 %poison, 0 ; Returns a poison value.
br i1 %cmp, label %true, label %end ; Branch to either destination.
Convert a constant pointer or constant vector of pointer, CST, to another
TYPE in a different address space. The constraints of the operands are the
same as those for the :ref:`addrspacecast instruction <i_addrspacecast>`.
-``getelementptr (CSTPTR, IDX0, IDX1, ...)``, ``getelementptr inbounds (CSTPTR, IDX0, IDX1, ...)``
+``getelementptr (TY, CSTPTR, IDX0, IDX1, ...)``, ``getelementptr inbounds (TY, CSTPTR, IDX0, IDX1, ...)``
Perform the :ref:`getelementptr operation <i_getelementptr>` on
constants. As with the :ref:`getelementptr <i_getelementptr>`
instruction, the index list may have zero or more indexes, which are
- required to make sense for the type of "CSTPTR".
+ required to make sense for the type of "pointer to TY".
``select (COND, VAL1, VAL2)``
Perform the :ref:`select operation <i_select>` on constants.
``icmp COND (VAL1, VAL2)``
----------------------------
LLVM supports inline assembler expressions (as opposed to :ref:`Module-Level
-Inline Assembly <moduleasm>`) through the use of a special value. This
-value represents the inline assembler as a string (containing the
-instructions to emit), a list of operand constraints (stored as a
-string), a flag that indicates whether or not the inline asm expression
-has side effects, and a flag indicating whether the function containing
-the asm needs to align its stack conservatively. An example inline
-assembler expression is:
+Inline Assembly <moduleasm>`) through the use of a special value. This value
+represents the inline assembler as a template string (containing the
+instructions to emit), a list of operand constraints (stored as a string), a
+flag that indicates whether or not the inline asm expression has side effects,
+and a flag indicating whether the function containing the asm needs to align its
+stack conservatively.
+
+The template string supports argument substitution of the operands using "``$``"
+followed by a number, to indicate substitution of the given register/memory
+location, as specified by the constraint string. "``${NUM:MODIFIER}``" may also
+be used, where ``MODIFIER`` is a target-specific annotation for how to print the
+operand (See :ref:`inline-asm-modifiers`).
+
+A literal "``$``" may be included by using "``$$``" in the template. To include
+other special characters into the output, the usual "``\XX``" escapes may be
+used, just as in other strings. Note that after template substitution, the
+resulting assembly string is parsed by LLVM's integrated assembler unless it is
+disabled -- even when emitting a ``.s`` file -- and thus must contain assembly
+syntax known to LLVM.
+
+LLVM's support for inline asm is modeled closely on the requirements of Clang's
+GCC-compatible inline-asm support. Thus, the feature-set and the constraint and
+modifier codes listed here are similar or identical to those in GCC's inline asm
+support. However, to be clear, the syntax of the template and constraint strings
+described here is *not* the same as the syntax accepted by GCC and Clang, and,
+while most constraint letters are passed through as-is by Clang, some get
+translated to other codes when converting from the C source to the LLVM
+assembly.
+
+An example inline assembler expression is:
.. code-block:: llvm
first, the '``alignstack``' keyword second and the '``inteldialect``'
keyword last.
+Inline Asm Constraint String
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The constraint list is a comma-separated string, each element containing one or
+more constraint codes.
+
+For each element in the constraint list an appropriate register or memory
+operand will be chosen, and it will be made available to assembly template
+string expansion as ``$0`` for the first constraint in the list, ``$1`` for the
+second, etc.
+
+There are three different types of constraints, which are distinguished by a
+prefix symbol in front of the constraint code: Output, Input, and Clobber. The
+constraints must always be given in that order: outputs first, then inputs, then
+clobbers. They cannot be intermingled.
+
+There are also three different categories of constraint codes:
+
+- Register constraint. This is either a register class, or a fixed physical
+ register. This kind of constraint will allocate a register, and if necessary,
+ bitcast the argument or result to the appropriate type.
+- Memory constraint. This kind of constraint is for use with an instruction
+ taking a memory operand. Different constraints allow for different addressing
+ modes used by the target.
+- Immediate value constraint. This kind of constraint is for an integer or other
+ immediate value which can be rendered directly into an instruction. The
+ various target-specific constraints allow the selection of a value in the
+ proper range for the instruction you wish to use it with.
+
+Output constraints
+""""""""""""""""""
+
+Output constraints are specified by an "``=``" prefix (e.g. "``=r``"). This
+indicates that the assembly will write to this operand, and the operand will
+then be made available as a return value of the ``asm`` expression. Output
+constraints do not consume an argument from the call instruction. (Except, see
+below about indirect outputs).
+
+Normally, it is expected that no output locations are written to by the assembly
+expression until *all* of the inputs have been read. As such, LLVM may assign
+the same register to an output and an input. If this is not safe (e.g. if the
+assembly contains two instructions, where the first writes to one output, and
+the second reads an input and writes to a second output), then the "``&``"
+modifier must be used (e.g. "``=&r``") to specify that the output is an
+"early-clobber" output. Marking an ouput as "early-clobber" ensures that LLVM
+will not use the same register for any inputs (other than an input tied to this
+output).
+
+Input constraints
+"""""""""""""""""
+
+Input constraints do not have a prefix -- just the constraint codes. Each input
+constraint will consume one argument from the call instruction. It is not
+permitted for the asm to write to any input register or memory location (unless
+that input is tied to an output). Note also that multiple inputs may all be
+assigned to the same register, if LLVM can determine that they necessarily all
+contain the same value.
+
+Instead of providing a Constraint Code, input constraints may also "tie"
+themselves to an output constraint, by providing an integer as the constraint
+string. Tied inputs still consume an argument from the call instruction, and
+take up a position in the asm template numbering as is usual -- they will simply
+be constrained to always use the same register as the output they've been tied
+to. For example, a constraint string of "``=r,0``" says to assign a register for
+output, and use that register as an input as well (it being the 0'th
+constraint).
+
+It is permitted to tie an input to an "early-clobber" output. In that case, no
+*other* input may share the same register as the input tied to the early-clobber
+(even when the other input has the same value).
+
+You may only tie an input to an output which has a register constraint, not a
+memory constraint. Only a single input may be tied to an output.
+
+There is also an "interesting" feature which deserves a bit of explanation: if a
+register class constraint allocates a register which is too small for the value
+type operand provided as input, the input value will be split into multiple
+registers, and all of them passed to the inline asm.
+
+However, this feature is often not as useful as you might think.
+
+Firstly, the registers are *not* guaranteed to be consecutive. So, on those
+architectures that have instructions which operate on multiple consecutive
+instructions, this is not an appropriate way to support them. (e.g. the 32-bit
+SparcV8 has a 64-bit load, which instruction takes a single 32-bit register. The
+hardware then loads into both the named register, and the next register. This
+feature of inline asm would not be useful to support that.)
+
+A few of the targets provide a template string modifier allowing explicit access
+to the second register of a two-register operand (e.g. MIPS ``L``, ``M``, and
+``D``). On such an architecture, you can actually access the second allocated
+register (yet, still, not any subsequent ones). But, in that case, you're still
+probably better off simply splitting the value into two separate operands, for
+clarity. (e.g. see the description of the ``A`` constraint on X86, which,
+despite existing only for use with this feature, is not really a good idea to
+use)
+
+Indirect inputs and outputs
+"""""""""""""""""""""""""""
+
+Indirect output or input constraints can be specified by the "``*``" modifier
+(which goes after the "``=``" in case of an output). This indicates that the asm
+will write to or read from the contents of an *address* provided as an input
+argument. (Note that in this way, indirect outputs act more like an *input* than
+an output: just like an input, they consume an argument of the call expression,
+rather than producing a return value. An indirect output constraint is an
+"output" only in that the asm is expected to write to the contents of the input
+memory location, instead of just read from it).
+
+This is most typically used for memory constraint, e.g. "``=*m``", to pass the
+address of a variable as a value.
+
+It is also possible to use an indirect *register* constraint, but only on output
+(e.g. "``=*r``"). This will cause LLVM to allocate a register for an output
+value normally, and then, separately emit a store to the address provided as
+input, after the provided inline asm. (It's not clear what value this
+functionality provides, compared to writing the store explicitly after the asm
+statement, and it can only produce worse code, since it bypasses many
+optimization passes. I would recommend not using it.)
+
+
+Clobber constraints
+"""""""""""""""""""
+
+A clobber constraint is indicated by a "``~``" prefix. A clobber does not
+consume an input operand, nor generate an output. Clobbers cannot use any of the
+general constraint code letters -- they may use only explicit register
+constraints, e.g. "``~{eax}``". The one exception is that a clobber string of
+"``~{memory}``" indicates that the assembly writes to arbitrary undeclared
+memory locations -- not only the memory pointed to by a declared indirect
+output.
+
+
+Constraint Codes
+""""""""""""""""
+After a potential prefix comes constraint code, or codes.
+
+A Constraint Code is either a single letter (e.g. "``r``"), a "``^``" character
+followed by two letters (e.g. "``^wc``"), or "``{``" register-name "``}``"
+(e.g. "``{eax}``").
+
+The one and two letter constraint codes are typically chosen to be the same as
+GCC's constraint codes.
+
+A single constraint may include one or more than constraint code in it, leaving
+it up to LLVM to choose which one to use. This is included mainly for
+compatibility with the translation of GCC inline asm coming from clang.
+
+There are two ways to specify alternatives, and either or both may be used in an
+inline asm constraint list:
+
+1) Append the codes to each other, making a constraint code set. E.g. "``im``"
+ or "``{eax}m``". This means "choose any of the options in the set". The
+ choice of constraint is made independently for each constraint in the
+ constraint list.
+
+2) Use "``|``" between constraint code sets, creating alternatives. Every
+ constraint in the constraint list must have the same number of alternative
+ sets. With this syntax, the same alternative in *all* of the items in the
+ constraint list will be chosen together.
+
+Putting those together, you might have a two operand constraint string like
+``"rm|r,ri|rm"``. This indicates that if operand 0 is ``r`` or ``m``, then
+operand 1 may be one of ``r`` or ``i``. If operand 0 is ``r``, then operand 1
+may be one of ``r`` or ``m``. But, operand 0 and 1 cannot both be of type m.
+
+However, the use of either of the alternatives features is *NOT* recommended, as
+LLVM is not able to make an intelligent choice about which one to use. (At the
+point it currently needs to choose, not enough information is available to do so
+in a smart way.) Thus, it simply tries to make a choice that's most likely to
+compile, not one that will be optimal performance. (e.g., given "``rm``", it'll
+always choose to use memory, not registers). And, if given multiple registers,
+or multiple register classes, it will simply choose the first one. (In fact, it
+doesn't currently even ensure explicitly specified physical registers are
+unique, so specifying multiple physical registers as alternatives, like
+``{r11}{r12},{r11}{r12}``, will assign r11 to both operands, not at all what was
+intended.)
+
+Supported Constraint Code List
+""""""""""""""""""""""""""""""
+
+The constraint codes are, in general, expected to behave the same way they do in
+GCC. LLVM's support is often implemented on an 'as-needed' basis, to support C
+inline asm code which was supported by GCC. A mismatch in behavior between LLVM
+and GCC likely indicates a bug in LLVM.
+
+Some constraint codes are typically supported by all targets:
+
+- ``r``: A register in the target's general purpose register class.
+- ``m``: A memory address operand. It is target-specific what addressing modes
+ are supported, typical examples are register, or register + register offset,
+ or register + immediate offset (of some target-specific size).
+- ``i``: An integer constant (of target-specific width). Allows either a simple
+ immediate, or a relocatable value.
+- ``n``: An integer constant -- *not* including relocatable values.
+- ``s``: An integer constant, but allowing *only* relocatable values.
+- ``X``: Allows an operand of any kind, no constraint whatsoever. Typically
+ useful to pass a label for an asm branch or call.
+
+ .. FIXME: but that surely isn't actually okay to jump out of an asm
+ block without telling llvm about the control transfer???)
+
+- ``{register-name}``: Requires exactly the named physical register.
+
+Other constraints are target-specific:
+
+AArch64:
+
+- ``z``: An immediate integer 0. Outputs ``WZR`` or ``XZR``, as appropriate.
+- ``I``: An immediate integer valid for an ``ADD`` or ``SUB`` instruction,
+ i.e. 0 to 4095 with optional shift by 12.
+- ``J``: An immediate integer that, when negated, is valid for an ``ADD`` or
+ ``SUB`` instruction, i.e. -1 to -4095 with optional left shift by 12.
+- ``K``: An immediate integer that is valid for the 'bitmask immediate 32' of a
+ logical instruction like ``AND``, ``EOR``, or ``ORR`` with a 32-bit register.
+- ``L``: An immediate integer that is valid for the 'bitmask immediate 64' of a
+ logical instruction like ``AND``, ``EOR``, or ``ORR`` with a 64-bit register.
+- ``M``: An immediate integer for use with the ``MOV`` assembly alias on a
+ 32-bit register. This is a superset of ``K``: in addition to the bitmask
+ immediate, also allows immediate integers which can be loaded with a single
+ ``MOVZ`` or ``MOVL`` instruction.
+- ``N``: An immediate integer for use with the ``MOV`` assembly alias on a
+ 64-bit register. This is a superset of ``L``.
+- ``Q``: Memory address operand must be in a single register (no
+ offsets). (However, LLVM currently does this for the ``m`` constraint as
+ well.)
+- ``r``: A 32 or 64-bit integer register (W* or X*).
+- ``w``: A 32, 64, or 128-bit floating-point/SIMD register.
+- ``x``: A lower 128-bit floating-point/SIMD register (``V0`` to ``V15``).
+
+AMDGPU:
+
+- ``r``: A 32 or 64-bit integer register.
+- ``[0-9]v``: The 32-bit VGPR register, number 0-9.
+- ``[0-9]s``: The 32-bit SGPR register, number 0-9.
+
+
+All ARM modes:
+
+- ``Q``, ``Um``, ``Un``, ``Uq``, ``Us``, ``Ut``, ``Uv``, ``Uy``: Memory address
+ operand. Treated the same as operand ``m``, at the moment.
+
+ARM and ARM's Thumb2 mode:
+
+- ``j``: An immediate integer between 0 and 65535 (valid for ``MOVW``)
+- ``I``: An immediate integer valid for a data-processing instruction.
+- ``J``: An immediate integer between -4095 and 4095.
+- ``K``: An immediate integer whose bitwise inverse is valid for a
+ data-processing instruction. (Can be used with template modifier "``B``" to
+ print the inverted value).
+- ``L``: An immediate integer whose negation is valid for a data-processing
+ instruction. (Can be used with template modifier "``n``" to print the negated
+ value).
+- ``M``: A power of two or a integer between 0 and 32.
+- ``N``: Invalid immediate constraint.
+- ``O``: Invalid immediate constraint.
+- ``r``: A general-purpose 32-bit integer register (``r0-r15``).
+- ``l``: In Thumb2 mode, low 32-bit GPR registers (``r0-r7``). In ARM mode, same
+ as ``r``.
+- ``h``: In Thumb2 mode, a high 32-bit GPR register (``r8-r15``). In ARM mode,
+ invalid.
+- ``w``: A 32, 64, or 128-bit floating-point/SIMD register: ``s0-s31``,
+ ``d0-d31``, or ``q0-q15``.
+- ``x``: A 32, 64, or 128-bit floating-point/SIMD register: ``s0-s15``,
+ ``d0-d7``, or ``q0-q3``.
+- ``t``: A floating-point/SIMD register, only supports 32-bit values:
+ ``s0-s31``.
+
+ARM's Thumb1 mode:
+
+- ``I``: An immediate integer between 0 and 255.
+- ``J``: An immediate integer between -255 and -1.
+- ``K``: An immediate integer between 0 and 255, with optional left-shift by
+ some amount.
+- ``L``: An immediate integer between -7 and 7.
+- ``M``: An immediate integer which is a multiple of 4 between 0 and 1020.
+- ``N``: An immediate integer between 0 and 31.
+- ``O``: An immediate integer which is a multiple of 4 between -508 and 508.
+- ``r``: A low 32-bit GPR register (``r0-r7``).
+- ``l``: A low 32-bit GPR register (``r0-r7``).
+- ``h``: A high GPR register (``r0-r7``).
+- ``w``: A 32, 64, or 128-bit floating-point/SIMD register: ``s0-s31``,
+ ``d0-d31``, or ``q0-q15``.
+- ``x``: A 32, 64, or 128-bit floating-point/SIMD register: ``s0-s15``,
+ ``d0-d7``, or ``q0-q3``.
+- ``t``: A floating-point/SIMD register, only supports 32-bit values:
+ ``s0-s31``.
+
+
+Hexagon:
+
+- ``o``, ``v``: A memory address operand, treated the same as constraint ``m``,
+ at the moment.
+- ``r``: A 32 or 64-bit register.
+
+MSP430:
+
+- ``r``: An 8 or 16-bit register.
+
+MIPS:
+
+- ``I``: An immediate signed 16-bit integer.
+- ``J``: An immediate integer zero.
+- ``K``: An immediate unsigned 16-bit integer.
+- ``L``: An immediate 32-bit integer, where the lower 16 bits are 0.
+- ``N``: An immediate integer between -65535 and -1.
+- ``O``: An immediate signed 15-bit integer.
+- ``P``: An immediate integer between 1 and 65535.
+- ``m``: A memory address operand. In MIPS-SE mode, allows a base address
+ register plus 16-bit immediate offset. In MIPS mode, just a base register.
+- ``R``: A memory address operand. In MIPS-SE mode, allows a base address
+ register plus a 9-bit signed offset. In MIPS mode, the same as constraint
+ ``m``.
+- ``ZC``: A memory address operand, suitable for use in a ``pref``, ``ll``, or
+ ``sc`` instruction on the given subtarget (details vary).
+- ``r``, ``d``, ``y``: A 32 or 64-bit GPR register.
+- ``f``: A 32 or 64-bit FPU register (``F0-F31``), or a 128-bit MSA register
+ (``W0-W31``). In the case of MSA registers, it is recommended to use the ``w``
+ argument modifier for compatibility with GCC.
+- ``c``: A 32-bit or 64-bit GPR register suitable for indirect jump (always
+ ``25``).
+- ``l``: The ``lo`` register, 32 or 64-bit.
+- ``x``: Invalid.
+
+NVPTX:
+
+- ``b``: A 1-bit integer register.
+- ``c`` or ``h``: A 16-bit integer register.
+- ``r``: A 32-bit integer register.
+- ``l`` or ``N``: A 64-bit integer register.
+- ``f``: A 32-bit float register.
+- ``d``: A 64-bit float register.
+
+
+PowerPC:
+
+- ``I``: An immediate signed 16-bit integer.
+- ``J``: An immediate unsigned 16-bit integer, shifted left 16 bits.
+- ``K``: An immediate unsigned 16-bit integer.
+- ``L``: An immediate signed 16-bit integer, shifted left 16 bits.
+- ``M``: An immediate integer greater than 31.
+- ``N``: An immediate integer that is an exact power of 2.
+- ``O``: The immediate integer constant 0.
+- ``P``: An immediate integer constant whose negation is a signed 16-bit
+ constant.
+- ``es``, ``o``, ``Q``, ``Z``, ``Zy``: A memory address operand, currently
+ treated the same as ``m``.
+- ``r``: A 32 or 64-bit integer register.
+- ``b``: A 32 or 64-bit integer register, excluding ``R0`` (that is:
+ ``R1-R31``).
+- ``f``: A 32 or 64-bit float register (``F0-F31``), or when QPX is enabled, a
+ 128 or 256-bit QPX register (``Q0-Q31``; aliases the ``F`` registers).
+- ``v``: For ``4 x f32`` or ``4 x f64`` types, when QPX is enabled, a
+ 128 or 256-bit QPX register (``Q0-Q31``), otherwise a 128-bit
+ altivec vector register (``V0-V31``).
+
+ .. FIXME: is this a bug that v accepts QPX registers? I think this
+ is supposed to only use the altivec vector registers?
+
+- ``y``: Condition register (``CR0-CR7``).
+- ``wc``: An individual CR bit in a CR register.
+- ``wa``, ``wd``, ``wf``: Any 128-bit VSX vector register, from the full VSX
+ register set (overlapping both the floating-point and vector register files).
+- ``ws``: A 32 or 64-bit floating point register, from the full VSX register
+ set.
+
+Sparc:
+
+- ``I``: An immediate 13-bit signed integer.
+- ``r``: A 32-bit integer register.
+
+SystemZ:
+
+- ``I``: An immediate unsigned 8-bit integer.
+- ``J``: An immediate unsigned 12-bit integer.
+- ``K``: An immediate signed 16-bit integer.
+- ``L``: An immediate signed 20-bit integer.
+- ``M``: An immediate integer 0x7fffffff.
+- ``Q``, ``R``, ``S``, ``T``: A memory address operand, treated the same as
+ ``m``, at the moment.
+- ``r`` or ``d``: A 32, 64, or 128-bit integer register.
+- ``a``: A 32, 64, or 128-bit integer address register (excludes R0, which in an
+ address context evaluates as zero).
+- ``h``: A 32-bit value in the high part of a 64bit data register
+ (LLVM-specific)
+- ``f``: A 32, 64, or 128-bit floating point register.
+
+X86:
+
+- ``I``: An immediate integer between 0 and 31.
+- ``J``: An immediate integer between 0 and 64.
+- ``K``: An immediate signed 8-bit integer.
+- ``L``: An immediate integer, 0xff or 0xffff or (in 64-bit mode only)
+ 0xffffffff.
+- ``M``: An immediate integer between 0 and 3.
+- ``N``: An immediate unsigned 8-bit integer.
+- ``O``: An immediate integer between 0 and 127.
+- ``e``: An immediate 32-bit signed integer.
+- ``Z``: An immediate 32-bit unsigned integer.
+- ``o``, ``v``: Treated the same as ``m``, at the moment.
+- ``q``: An 8, 16, 32, or 64-bit register which can be accessed as an 8-bit
+ ``l`` integer register. On X86-32, this is the ``a``, ``b``, ``c``, and ``d``
+ registers, and on X86-64, it is all of the integer registers.
+- ``Q``: An 8, 16, 32, or 64-bit register which can be accessed as an 8-bit
+ ``h`` integer register. This is the ``a``, ``b``, ``c``, and ``d`` registers.
+- ``r`` or ``l``: An 8, 16, 32, or 64-bit integer register.
+- ``R``: An 8, 16, 32, or 64-bit "legacy" integer register -- one which has
+ existed since i386, and can be accessed without the REX prefix.
+- ``f``: A 32, 64, or 80-bit '387 FPU stack pseudo-register.
+- ``y``: A 64-bit MMX register, if MMX is enabled.
+- ``x``: If SSE is enabled: a 32 or 64-bit scalar operand, or 128-bit vector
+ operand in a SSE register. If AVX is also enabled, can also be a 256-bit
+ vector operand in an AVX register. If AVX-512 is also enabled, can also be a
+ 512-bit vector operand in an AVX512 register, Otherwise, an error.
+- ``Y``: The same as ``x``, if *SSE2* is enabled, otherwise an error.
+- ``A``: Special case: allocates EAX first, then EDX, for a single operand (in
+ 32-bit mode, a 64-bit integer operand will get split into two registers). It
+ is not recommended to use this constraint, as in 64-bit mode, the 64-bit
+ operand will get allocated only to RAX -- if two 32-bit operands are needed,
+ you're better off splitting it yourself, before passing it to the asm
+ statement.
+
+XCore:
+
+- ``r``: A 32-bit integer register.
+
+
+.. _inline-asm-modifiers:
+
+Asm template argument modifiers
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In the asm template string, modifiers can be used on the operand reference, like
+"``${0:n}``".
+
+The modifiers are, in general, expected to behave the same way they do in
+GCC. LLVM's support is often implemented on an 'as-needed' basis, to support C
+inline asm code which was supported by GCC. A mismatch in behavior between LLVM
+and GCC likely indicates a bug in LLVM.
+
+Target-independent:
+
+- ``c``: Print an immediate integer constant unadorned, without
+ the target-specific immediate punctuation (e.g. no ``$`` prefix).
+- ``n``: Negate and print immediate integer constant unadorned, without the
+ target-specific immediate punctuation (e.g. no ``$`` prefix).
+- ``l``: Print as an unadorned label, without the target-specific label
+ punctuation (e.g. no ``$`` prefix).
+
+AArch64:
+
+- ``w``: Print a GPR register with a ``w*`` name instead of ``x*`` name. E.g.,
+ instead of ``x30``, print ``w30``.
+- ``x``: Print a GPR register with a ``x*`` name. (this is the default, anyhow).
+- ``b``, ``h``, ``s``, ``d``, ``q``: Print a floating-point/SIMD register with a
+ ``b*``, ``h*``, ``s*``, ``d*``, or ``q*`` name, rather than the default of
+ ``v*``.
+
+AMDGPU:
+
+- ``r``: No effect.
+
+ARM:
+
+- ``a``: Print an operand as an address (with ``[`` and ``]`` surrounding a
+ register).
+- ``P``: No effect.
+- ``q``: No effect.
+- ``y``: Print a VFP single-precision register as an indexed double (e.g. print
+ as ``d4[1]`` instead of ``s9``)
+- ``B``: Bitwise invert and print an immediate integer constant without ``#``
+ prefix.
+- ``L``: Print the low 16-bits of an immediate integer constant.
+- ``M``: Print as a register set suitable for ldm/stm. Also prints *all*
+ register operands subsequent to the specified one (!), so use carefully.
+- ``Q``: Print the low-order register of a register-pair, or the low-order
+ register of a two-register operand.
+- ``R``: Print the high-order register of a register-pair, or the high-order
+ register of a two-register operand.
+- ``H``: Print the second register of a register-pair. (On a big-endian system,
+ ``H`` is equivalent to ``Q``, and on little-endian system, ``H`` is equivalent
+ to ``R``.)
+
+ .. FIXME: H doesn't currently support printing the second register
+ of a two-register operand.
+
+- ``e``: Print the low doubleword register of a NEON quad register.
+- ``f``: Print the high doubleword register of a NEON quad register.
+- ``m``: Print the base register of a memory operand without the ``[`` and ``]``
+ adornment.
+
+Hexagon:
+
+- ``L``: Print the second register of a two-register operand. Requires that it
+ has been allocated consecutively to the first.
+
+ .. FIXME: why is it restricted to consecutive ones? And there's
+ nothing that ensures that happens, is there?
+
+- ``I``: Print the letter 'i' if the operand is an integer constant, otherwise
+ nothing. Used to print 'addi' vs 'add' instructions.
+
+MSP430:
+
+No additional modifiers.
+
+MIPS:
+
+- ``X``: Print an immediate integer as hexadecimal
+- ``x``: Print the low 16 bits of an immediate integer as hexadecimal.
+- ``d``: Print an immediate integer as decimal.
+- ``m``: Subtract one and print an immediate integer as decimal.
+- ``z``: Print $0 if an immediate zero, otherwise print normally.
+- ``L``: Print the low-order register of a two-register operand, or prints the
+ address of the low-order word of a double-word memory operand.
+
+ .. FIXME: L seems to be missing memory operand support.
+
+- ``M``: Print the high-order register of a two-register operand, or prints the
+ address of the high-order word of a double-word memory operand.
+
+ .. FIXME: M seems to be missing memory operand support.
+
+- ``D``: Print the second register of a two-register operand, or prints the
+ second word of a double-word memory operand. (On a big-endian system, ``D`` is
+ equivalent to ``L``, and on little-endian system, ``D`` is equivalent to
+ ``M``.)
+- ``w``: No effect. Provided for compatibility with GCC which requires this
+ modifier in order to print MSA registers (``W0-W31``) with the ``f``
+ constraint.
+
+NVPTX:
+
+- ``r``: No effect.
+
+PowerPC:
+
+- ``L``: Print the second register of a two-register operand. Requires that it
+ has been allocated consecutively to the first.
+
+ .. FIXME: why is it restricted to consecutive ones? And there's
+ nothing that ensures that happens, is there?
+
+- ``I``: Print the letter 'i' if the operand is an integer constant, otherwise
+ nothing. Used to print 'addi' vs 'add' instructions.
+- ``y``: For a memory operand, prints formatter for a two-register X-form
+ instruction. (Currently always prints ``r0,OPERAND``).
+- ``U``: Prints 'u' if the memory operand is an update form, and nothing
+ otherwise. (NOTE: LLVM does not support update form, so this will currently
+ always print nothing)
+- ``X``: Prints 'x' if the memory operand is an indexed form. (NOTE: LLVM does
+ not support indexed form, so this will currently always print nothing)
+
+Sparc:
+
+- ``r``: No effect.
+
+SystemZ:
+
+SystemZ implements only ``n``, and does *not* support any of the other
+target-independent modifiers.
+
+X86:
+
+- ``c``: Print an unadorned integer or symbol name. (The latter is
+ target-specific behavior for this typically target-independent modifier).
+- ``A``: Print a register name with a '``*``' before it.
+- ``b``: Print an 8-bit register name (e.g. ``al``); do nothing on a memory
+ operand.
+- ``h``: Print the upper 8-bit register name (e.g. ``ah``); do nothing on a
+ memory operand.
+- ``w``: Print the 16-bit register name (e.g. ``ax``); do nothing on a memory
+ operand.
+- ``k``: Print the 32-bit register name (e.g. ``eax``); do nothing on a memory
+ operand.
+- ``q``: Print the 64-bit register name (e.g. ``rax``), if 64-bit registers are
+ available, otherwise the 32-bit register name; do nothing on a memory operand.
+- ``n``: Negate and print an unadorned integer, or, for operands other than an
+ immediate integer (e.g. a relocatable symbol expression), print a '-' before
+ the operand. (The behavior for relocatable symbol expressions is a
+ target-specific behavior for this typically target-independent modifier)
+- ``H``: Print a memory reference with additional offset +8.
+- ``P``: Print a memory reference or operand for use as the argument of a call
+ instruction. (E.g. omit ``(rip)``, even though it's PC-relative.)
+
+XCore:
+
+No additional modifiers.
+
+
Inline Asm Metadata
^^^^^^^^^^^^^^^^^^^
code generator. One example application of metadata is source-level
debug information. There are two metadata primitives: strings and nodes.
-Metadata does not have a type, and is not a value. If referenced from a
+Metadata does not have a type, and is not a value. If referenced from a
``call`` instruction, it uses the ``metadata`` type.
All metadata are identified in syntax by a exclamation point ('``!``').
!0 = distinct !{!"test\00", i32 10}
``distinct`` nodes are useful when nodes shouldn't be merged based on their
-content. They can also occur when transformations cause uniquing collisions
+content. They can also occur when transformations cause uniquing collisions
when metadata operands change.
A :ref:`named metadata <namedmetadatastructure>` is a collection of
call void @llvm.dbg.value(metadata !24, i64 0, metadata !25)
-Metadata can be attached with an instruction. Here metadata ``!21`` is
-attached to the ``add`` instruction using the ``!dbg`` identifier:
+Metadata can be attached to an instruction. Here metadata ``!21`` is attached
+to the ``add`` instruction using the ``!dbg`` identifier:
.. code-block:: llvm
%indvar.next = add i64 %indvar, 1, !dbg !21
+Metadata can also be attached to a function definition. Here metadata ``!22``
+is attached to the ``foo`` function using the ``!dbg`` identifier:
+
+.. code-block:: llvm
+
+ define void @foo() !dbg !22 {
+ ret void
+ }
+
More information about specific metadata nodes recognized by the
optimizers and code generator is found below.
+.. _specialized-metadata:
+
Specialized Metadata Nodes
^^^^^^^^^^^^^^^^^^^^^^^^^^
Specialized metadata nodes are custom data structures in metadata (as opposed
-to generic tuples). Their fields are labelled, and can be specified in any
+to generic tuples). Their fields are labelled, and can be specified in any
order.
These aren't inherently debug info centric, but currently all the specialized
metadata nodes are related to debug info.
-MDCompileUnit
+.. _DICompileUnit:
+
+DICompileUnit
"""""""""""""
-``MDCompileUnit`` nodes represent a compile unit. The ``enums:``,
-``retainedTypes:``, ``subprograms:``, ``globals:`` and ``imports:`` fields are
-tuples containing the debug info to be emitted along with the compile unit,
-regardless of code optimizations (some nodes are only emitted if there are
+``DICompileUnit`` nodes represent a compile unit. The ``enums:``,
+``retainedTypes:``, ``subprograms:``, ``globals:``, ``imports:`` and ``macros:``
+fields are tuples containing the debug info to be emitted along with the compile
+unit, regardless of code optimizations (some nodes are only emitted if there are
references to them from instructions).
.. code-block:: llvm
- !0 = !MDCompileUnit(language: DW_LANG_C99, file: !1, producer: "clang",
+ !0 = !DICompileUnit(language: DW_LANG_C99, file: !1, producer: "clang",
isOptimized: true, flags: "-O2", runtimeVersion: 2,
splitDebugFilename: "abc.debug", emissionKind: 1,
enums: !2, retainedTypes: !3, subprograms: !4,
- globals: !5, imports: !6)
+ globals: !5, imports: !6, macros: !7, dwoId: 0x0abcd)
+
+Compile unit descriptors provide the root scope for objects declared in a
+specific compilation unit. File descriptors are defined using this scope.
+These descriptors are collected by a named metadata ``!llvm.dbg.cu``. They
+keep track of subprograms, global variables, type information, and imported
+entities (declarations and namespaces).
+
+.. _DIFile:
-MDFile
+DIFile
""""""
-``MDFile`` nodes represent files. The ``filename:`` can include slashes.
+``DIFile`` nodes represent files. The ``filename:`` can include slashes.
.. code-block:: llvm
- !0 = !MDFile(filename: "path/to/file", directory: "/path/to/dir")
+ !0 = !DIFile(filename: "path/to/file", directory: "/path/to/dir")
-.. _MDLocation:
+Files are sometimes used in ``scope:`` fields, and are the only valid target
+for ``file:`` fields.
-MDBasicType
+.. _DIBasicType:
+
+DIBasicType
"""""""""""
-``MDBasicType`` nodes represent primitive types. ``tag:`` defaults to
-``DW_TAG_base_type``.
+``DIBasicType`` nodes represent primitive types, such as ``int``, ``bool`` and
+``float``. ``tag:`` defaults to ``DW_TAG_base_type``.
.. code-block:: llvm
- !0 = !MDBasicType(name: "unsigned char", size: 8, align: 8,
+ !0 = !DIBasicType(name: "unsigned char", size: 8, align: 8,
encoding: DW_ATE_unsigned_char)
- !1 = !MDBasicType(tag: DW_TAG_unspecified_type, name: "decltype(nullptr)")
+ !1 = !DIBasicType(tag: DW_TAG_unspecified_type, name: "decltype(nullptr)")
+
+The ``encoding:`` describes the details of the type. Usually it's one of the
+following:
-.. _MDSubroutineType:
+.. code-block:: llvm
+
+ DW_ATE_address = 1
+ DW_ATE_boolean = 2
+ DW_ATE_float = 4
+ DW_ATE_signed = 5
+ DW_ATE_signed_char = 6
+ DW_ATE_unsigned = 7
+ DW_ATE_unsigned_char = 8
+
+.. _DISubroutineType:
-MDSubroutineType
+DISubroutineType
""""""""""""""""
-``MDSubroutineType`` nodes represent subroutine types. Their ``types:`` field
+``DISubroutineType`` nodes represent subroutine types. Their ``types:`` field
refers to a tuple; the first operand is the return type, while the rest are the
-types of the formal arguments in order. If the first operand is ``null``, that
+types of the formal arguments in order. If the first operand is ``null``, that
represents a function with no return value (such as ``void foo() {}`` in C++).
.. code-block:: llvm
!0 = !BasicType(name: "int", size: 32, align: 32, DW_ATE_signed)
!1 = !BasicType(name: "char", size: 8, align: 8, DW_ATE_signed_char)
- !2 = !MDSubroutineType(types: !{null, !0, !1}) ; void (int, char)
+ !2 = !DISubroutineType(types: !{null, !0, !1}) ; void (int, char)
-MDDerivedType
+.. _DIDerivedType:
+
+DIDerivedType
"""""""""""""
-``MDDerivedType`` nodes represent types derived from other types, such as
+``DIDerivedType`` nodes represent types derived from other types, such as
qualified types.
.. code-block:: llvm
- !0 = !MDBasicType(name: "unsigned char", size: 8, align: 8,
+ !0 = !DIBasicType(name: "unsigned char", size: 8, align: 8,
encoding: DW_ATE_unsigned_char)
- !1 = !MDDerivedType(tag: DW_TAG_pointer_type, baseType: !0, size: 32,
+ !1 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !0, size: 32,
align: 32)
-.. _MDCompositeType:
+The following ``tag:`` values are valid:
-MDCompositeType
+.. code-block:: llvm
+
+ DW_TAG_formal_parameter = 5
+ DW_TAG_member = 13
+ DW_TAG_pointer_type = 15
+ DW_TAG_reference_type = 16
+ DW_TAG_typedef = 22
+ DW_TAG_ptr_to_member_type = 31
+ DW_TAG_const_type = 38
+ DW_TAG_volatile_type = 53
+ DW_TAG_restrict_type = 55
+
+``DW_TAG_member`` is used to define a member of a :ref:`composite type
+<DICompositeType>` or :ref:`subprogram <DISubprogram>`. The type of the member
+is the ``baseType:``. The ``offset:`` is the member's bit offset.
+``DW_TAG_formal_parameter`` is used to define a member which is a formal
+argument of a subprogram.
+
+``DW_TAG_typedef`` is used to provide a name for the ``baseType:``.
+
+``DW_TAG_pointer_type``, ``DW_TAG_reference_type``, ``DW_TAG_const_type``,
+``DW_TAG_volatile_type`` and ``DW_TAG_restrict_type`` are used to qualify the
+``baseType:``.
+
+Note that the ``void *`` type is expressed as a type derived from NULL.
+
+.. _DICompositeType:
+
+DICompositeType
"""""""""""""""
-``MDCompositeType`` nodes represent types composed of other types, like
-structures and unions. ``elements:`` points to a tuple of the composed types.
+``DICompositeType`` nodes represent types composed of other types, like
+structures and unions. ``elements:`` points to a tuple of the composed types.
If the source language supports ODR, the ``identifier:`` field gives the unique
-identifier used for type merging between modules. When specified, other types
+identifier used for type merging between modules. When specified, other types
can refer to composite types indirectly via a :ref:`metadata string
<metadata-string>` that matches their identifier.
.. code-block:: llvm
- !0 = !MDEnumerator(name: "SixKind", value: 7)
- !1 = !MDEnumerator(name: "SevenKind", value: 7)
- !2 = !MDEnumerator(name: "NegEightKind", value: -8)
- !3 = !MDCompositeType(tag: DW_TAG_enumeration_type, name: "Enum", file: !12,
+ !0 = !DIEnumerator(name: "SixKind", value: 7)
+ !1 = !DIEnumerator(name: "SevenKind", value: 7)
+ !2 = !DIEnumerator(name: "NegEightKind", value: -8)
+ !3 = !DICompositeType(tag: DW_TAG_enumeration_type, name: "Enum", file: !12,
line: 2, size: 32, align: 32, identifier: "_M4Enum",
elements: !{!0, !1, !2})
-MDSubrange
+The following ``tag:`` values are valid:
+
+.. code-block:: llvm
+
+ DW_TAG_array_type = 1
+ DW_TAG_class_type = 2
+ DW_TAG_enumeration_type = 4
+ DW_TAG_structure_type = 19
+ DW_TAG_union_type = 23
+ DW_TAG_subroutine_type = 21
+ DW_TAG_inheritance = 28
+
+
+For ``DW_TAG_array_type``, the ``elements:`` should be :ref:`subrange
+descriptors <DISubrange>`, each representing the range of subscripts at that
+level of indexing. The ``DIFlagVector`` flag to ``flags:`` indicates that an
+array type is a native packed vector.
+
+For ``DW_TAG_enumeration_type``, the ``elements:`` should be :ref:`enumerator
+descriptors <DIEnumerator>`, each representing the definition of an enumeration
+value for the set. All enumeration type descriptors are collected in the
+``enums:`` field of the :ref:`compile unit <DICompileUnit>`.
+
+For ``DW_TAG_structure_type``, ``DW_TAG_class_type``, and
+``DW_TAG_union_type``, the ``elements:`` should be :ref:`derived types
+<DIDerivedType>` with ``tag: DW_TAG_member`` or ``tag: DW_TAG_inheritance``.
+
+.. _DISubrange:
+
+DISubrange
""""""""""
-``MDSubrange`` nodes are the elements for ``DW_TAG_array_type`` variants of
-:ref:`MDCompositeType`. ``count: -1`` indicates an empty array.
+``DISubrange`` nodes are the elements for ``DW_TAG_array_type`` variants of
+:ref:`DICompositeType`. ``count: -1`` indicates an empty array.
.. code-block:: llvm
- !0 = !MDSubrange(count: 5, lowerBound: 0) ; array counting from 0
- !1 = !MDSubrange(count: 5, lowerBound: 1) ; array counting from 1
- !2 = !MDSubrange(count: -1) ; empty array.
+ !0 = !DISubrange(count: 5, lowerBound: 0) ; array counting from 0
+ !1 = !DISubrange(count: 5, lowerBound: 1) ; array counting from 1
+ !2 = !DISubrange(count: -1) ; empty array.
+
+.. _DIEnumerator:
-MDEnumerator
+DIEnumerator
""""""""""""
-``MDEnumerator`` nodes are the elements for ``DW_TAG_enumeration_type``
-variants of :ref:`MDCompositeType`.
+``DIEnumerator`` nodes are the elements for ``DW_TAG_enumeration_type``
+variants of :ref:`DICompositeType`.
.. code-block:: llvm
- !0 = !MDEnumerator(name: "SixKind", value: 7)
- !1 = !MDEnumerator(name: "SevenKind", value: 7)
- !2 = !MDEnumerator(name: "NegEightKind", value: -8)
+ !0 = !DIEnumerator(name: "SixKind", value: 7)
+ !1 = !DIEnumerator(name: "SevenKind", value: 7)
+ !2 = !DIEnumerator(name: "NegEightKind", value: -8)
-MDTemplateTypeParameter
+DITemplateTypeParameter
"""""""""""""""""""""""
-``MDTemplateTypeParameter`` nodes represent type parameters to generic source
-language constructs. They are used (optionally) in :ref:`MDCompositeType` and
-:ref:`MDSubprogram` ``templateParams:`` fields.
+``DITemplateTypeParameter`` nodes represent type parameters to generic source
+language constructs. They are used (optionally) in :ref:`DICompositeType` and
+:ref:`DISubprogram` ``templateParams:`` fields.
.. code-block:: llvm
- !0 = !MDTemplateTypeParameter(name: "Ty", type: !1)
+ !0 = !DITemplateTypeParameter(name: "Ty", type: !1)
-MDTemplateValueParameter
+DITemplateValueParameter
""""""""""""""""""""""""
-``MDTemplateValueParameter`` nodes represent value parameters to generic source
-language constructs. ``tag:`` defaults to ``DW_TAG_template_value_parameter``,
+``DITemplateValueParameter`` nodes represent value parameters to generic source
+language constructs. ``tag:`` defaults to ``DW_TAG_template_value_parameter``,
but if specified can also be set to ``DW_TAG_GNU_template_template_param`` or
-``DW_TAG_GNU_template_param_pack``. They are used (optionally) in
-:ref:`MDCompositeType` and :ref:`MDSubprogram` ``templateParams:`` fields.
+``DW_TAG_GNU_template_param_pack``. They are used (optionally) in
+:ref:`DICompositeType` and :ref:`DISubprogram` ``templateParams:`` fields.
.. code-block:: llvm
- !0 = !MDTemplateValueParameter(name: "Ty", type: !1, value: i32 7)
+ !0 = !DITemplateValueParameter(name: "Ty", type: !1, value: i32 7)
-MDNamespace
+DINamespace
"""""""""""
-``MDNamespace`` nodes represent namespaces in the source language.
+``DINamespace`` nodes represent namespaces in the source language.
.. code-block:: llvm
- !0 = !MDNamespace(name: "myawesomeproject", scope: !1, file: !2, line: 7)
+ !0 = !DINamespace(name: "myawesomeproject", scope: !1, file: !2, line: 7)
-MDGlobalVariable
+DIGlobalVariable
""""""""""""""""
-``MDGlobalVariable`` nodes represent global variables in the source language.
+``DIGlobalVariable`` nodes represent global variables in the source language.
.. code-block:: llvm
- !0 = !MDGlobalVariable(name: "foo", linkageName: "foo", scope: !1,
+ !0 = !DIGlobalVariable(name: "foo", linkageName: "foo", scope: !1,
file: !2, line: 7, type: !3, isLocal: true,
isDefinition: false, variable: i32* @foo,
declaration: !4)
-.. _MDSubprogram:
+All global variables should be referenced by the `globals:` field of a
+:ref:`compile unit <DICompileUnit>`.
-MDSubprogram
+.. _DISubprogram:
+
+DISubprogram
""""""""""""
-``MDSubprogram`` nodes represent functions from the source language. The
-``variables:`` field points at :ref:`variables <MDLocalVariable>` that must be
-retained, even if their IR counterparts are optimized out of the IR. The
-``type:`` field must point at an :ref:`MDSubroutineType`.
+``DISubprogram`` nodes represent functions from the source language. A
+``DISubprogram`` may be attached to a function definition using ``!dbg``
+metadata. The ``variables:`` field points at :ref:`variables <DILocalVariable>`
+that must be retained, even if their IR counterparts are optimized out of
+the IR. The ``type:`` field must point at an :ref:`DISubroutineType`.
.. code-block:: llvm
- !0 = !MDSubprogram(name: "foo", linkageName: "_Zfoov", scope: !1,
- file: !2, line: 7, type: !3, isLocal: true,
- isDefinition: false, scopeLine: 8, containingType: !4,
- virtuality: DW_VIRTUALITY_pure_virtual, virtualIndex: 10,
- flags: DIFlagPrototyped, isOptimized: true,
- function: void ()* @_Z3foov,
- templateParams: !5, declaration: !6, variables: !7)
+ define void @_Z3foov() !dbg !0 {
+ ...
+ }
+
+ !0 = distinct !DISubprogram(name: "foo", linkageName: "_Zfoov", scope: !1,
+ file: !2, line: 7, type: !3, isLocal: true,
+ isDefinition: false, scopeLine: 8,
+ containingType: !4,
+ virtuality: DW_VIRTUALITY_pure_virtual,
+ virtualIndex: 10, flags: DIFlagPrototyped,
+ isOptimized: true, templateParams: !5,
+ declaration: !6, variables: !7)
-.. _MDLexicalBlock:
+.. _DILexicalBlock:
-MDLexicalBlock
+DILexicalBlock
""""""""""""""
-``MDLexicalBlock`` nodes represent lexical blocks in the source language (a
-scope).
+``DILexicalBlock`` nodes describe nested blocks within a :ref:`subprogram
+<DISubprogram>`. The line number and column numbers are used to distinguish
+two lexical blocks at same depth. They are valid targets for ``scope:``
+fields.
.. code-block:: llvm
- !0 = !MDLexicalBlock(scope: !1, file: !2, line: 7, column: 35)
+ !0 = distinct !DILexicalBlock(scope: !1, file: !2, line: 7, column: 35)
-.. _MDLexicalBlockFile:
+Usually lexical blocks are ``distinct`` to prevent node merging based on
+operands.
-MDLexicalBlockFile
+.. _DILexicalBlockFile:
+
+DILexicalBlockFile
""""""""""""""""""
-``MDLexicalBlockFile`` nodes are used to discriminate between sections of a
-:ref:`lexical block <MDLexicalBlock>`. The ``file:`` field can be changed to
+``DILexicalBlockFile`` nodes are used to discriminate between sections of a
+:ref:`lexical block <DILexicalBlock>`. The ``file:`` field can be changed to
indicate textual inclusion, or the ``discriminator:`` field can be used to
discriminate between control flow within a single block in the source language.
.. code-block:: llvm
- !0 = !MDLexicalBlock(scope: !3, file: !4, line: 7, column: 35)
- !1 = !MDLexicalBlockFile(scope: !0, file: !4, discriminator: 0)
- !2 = !MDLexicalBlockFile(scope: !0, file: !4, discriminator: 1)
+ !0 = !DILexicalBlock(scope: !3, file: !4, line: 7, column: 35)
+ !1 = !DILexicalBlockFile(scope: !0, file: !4, discriminator: 0)
+ !2 = !DILexicalBlockFile(scope: !0, file: !4, discriminator: 1)
+
+.. _DILocation:
-MDLocation
+DILocation
""""""""""
-``MDLocation`` nodes represent source debug locations. The ``scope:`` field is
-mandatory, and points at an :ref:`MDLexicalBlockFile`, an
-:ref:`MDLexicalBlock`, or an :ref:`MDSubprogram`.
+``DILocation`` nodes represent source debug locations. The ``scope:`` field is
+mandatory, and points at an :ref:`DILexicalBlockFile`, an
+:ref:`DILexicalBlock`, or an :ref:`DISubprogram`.
.. code-block:: llvm
- !0 = !MDLocation(line: 2900, column: 42, scope: !1, inlinedAt: !2)
+ !0 = !DILocation(line: 2900, column: 42, scope: !1, inlinedAt: !2)
-.. _MDLocalVariable:
+.. _DILocalVariable:
-MDLocalVariable
+DILocalVariable
"""""""""""""""
-``MDLocalVariable`` nodes represent local variables in the source language.
-Instead of ``DW_TAG_variable``, they use LLVM-specific fake tags to
-discriminate between local variables (``DW_TAG_auto_variable``) and subprogram
-arguments (``DW_TAG_arg_variable``). In the latter case, the ``arg:`` field
-specifies the argument position, and this variable will be included in the
-``variables:`` field of its :ref:`MDSubprogram`.
-
-If set, the ``inlinedAt:`` field points at an :ref:`MDLocation`, and the
-variable represents an inlined version of a variable (with all other fields
-duplicated from the non-inlined version).
+``DILocalVariable`` nodes represent local variables in the source language. If
+the ``arg:`` field is set to non-zero, then this variable is a subprogram
+parameter, and it will be included in the ``variables:`` field of its
+:ref:`DISubprogram`.
.. code-block:: llvm
- !0 = !MDLocalVariable(tag: DW_TAG_arg_variable, name: "this", arg: 0,
- scope: !3, file: !2, line: 7, type: !3,
- flags: DIFlagArtificial, inlinedAt: !4)
- !1 = !MDLocalVariable(tag: DW_TAG_arg_variable, name: "x", arg: 1,
- scope: !4, file: !2, line: 7, type: !3,
- inlinedAt: !6)
- !1 = !MDLocalVariable(tag: DW_TAG_auto_variable, name: "y",
- scope: !5, file: !2, line: 7, type: !3,
- inlinedAt: !6)
+ !0 = !DILocalVariable(name: "this", arg: 1, scope: !3, file: !2, line: 7,
+ type: !3, flags: DIFlagArtificial)
+ !1 = !DILocalVariable(name: "x", arg: 2, scope: !4, file: !2, line: 7,
+ type: !3)
+ !2 = !DILocalVariable(name: "y", scope: !5, file: !2, line: 7, type: !3)
-MDExpression
+DIExpression
""""""""""""
-``MDExpression`` nodes represent DWARF expression sequences. They are used in
+``DIExpression`` nodes represent DWARF expression sequences. They are used in
:ref:`debug intrinsics<dbg_intrinsics>` (such as ``llvm.dbg.declare``) to
describe how the referenced LLVM variable relates to the source language
variable.
.. code-block:: llvm
- !0 = !MDExpression(DW_OP_deref)
- !1 = !MDExpression(DW_OP_plus, 3)
- !2 = !MDExpression(DW_OP_bit_piece, 3, 7)
- !3 = !MDExpression(DW_OP_deref, DW_OP_plus, 3, DW_OP_bit_piece, 3, 7)
+ !0 = !DIExpression(DW_OP_deref)
+ !1 = !DIExpression(DW_OP_plus, 3)
+ !2 = !DIExpression(DW_OP_bit_piece, 3, 7)
+ !3 = !DIExpression(DW_OP_deref, DW_OP_plus, 3, DW_OP_bit_piece, 3, 7)
-MDObjCProperty
+DIObjCProperty
""""""""""""""
-``MDObjCProperty`` nodes represent Objective-C property nodes.
+``DIObjCProperty`` nodes represent Objective-C property nodes.
.. code-block:: llvm
- !3 = !MDObjCProperty(name: "foo", file: !1, line: 7, setter: "setFoo",
+ !3 = !DIObjCProperty(name: "foo", file: !1, line: 7, setter: "setFoo",
getter: "getFoo", attributes: 7, type: !2)
-MDImportedEntity
+DIImportedEntity
""""""""""""""""
-``MDImportedEntity`` nodes represent entities (such as modules) imported into a
+``DIImportedEntity`` nodes represent entities (such as modules) imported into a
compile unit.
.. code-block:: llvm
- !2 = !MDImportedEntity(tag: DW_TAG_imported_module, name: "foo", scope: !0,
+ !2 = !DIImportedEntity(tag: DW_TAG_imported_module, name: "foo", scope: !0,
entity: !1, line: 7)
+DIMacro
+"""""""
+
+``DIMacro`` nodes represent definition or undefinition of a macro identifiers.
+The ``name:`` field is the macro identifier, followed by macro parameters when
+definining a function-like macro, and the ``value`` field is the token-string
+used to expand the macro identifier.
+
+.. code-block:: llvm
+
+ !2 = !DIMacro(macinfo: DW_MACINFO_define, line: 7, name: "foo(x)",
+ value: "((x) + 1)")
+ !3 = !DIMacro(macinfo: DW_MACINFO_undef, line: 30, name: "foo")
+
+DIMacroFile
+"""""""""""
+
+``DIMacroFile`` nodes represent inclusion of source files.
+The ``nodes:`` field is a list of ``DIMacro`` and ``DIMacroFile`` nodes that
+appear in the included source file.
+
+.. code-block:: llvm
+
+ !2 = !DIMacroFile(macinfo: DW_MACINFO_start_file, line: 7, file: !2,
+ nodes: !3)
+
'``tbaa``' Metadata
^^^^^^^^^^^^^^^^^^^
``noalias`` metadata can specifically be specified not to alias with some other
collection of memory access instructions that carry ``alias.scope`` metadata.
Each type of metadata specifies a list of scopes where each scope has an id and
-a domain. When evaluating an aliasing query, if for some some domain, the set
+a domain. When evaluating an aliasing query, if for some domain, the set
of scopes with that domain in one instruction's ``alias.scope`` list is a
subset of (or equal to) the set of scopes for that domain in another
instruction's ``noalias`` list, then the two memory accesses are assumed not to
The metadata identifying each domain is itself a list containing one or two
entries. The first entry is the name of the domain. Note that if the name is a
-string then it can be combined accross functions and translation units. A
+string then it can be combined across functions and translation units. A
self-reference can be used to create globally unique domain names. A
descriptive string may optionally be provided as a second list entry.
The metadata identifying each scope is also itself a list containing two or
three entries. The first entry is the name of the scope. Note that if the name
-is a string then it can be combined accross functions and translation units. A
+is a string then it can be combined across functions and translation units. A
self-reference can be used to create globally unique scope names. A metadata
reference to the scope's domain is the second entry. A descriptive string may
optionally be provided as a third list entry.
!7 = !{!3}
; These two instructions don't alias:
- %0 = load float* %c, align 4, !alias.scope !5
+ %0 = load float, float* %c, align 4, !alias.scope !5
store float %0, float* %arrayidx.i, align 4, !noalias !5
; These two instructions also don't alias (for domain !1, the set of scopes
; in the !alias.scope equals that in the !noalias list):
- %2 = load float* %c, align 4, !alias.scope !5
+ %2 = load float, float* %c, align 4, !alias.scope !5
store float %2, float* %arrayidx.i2, align 4, !noalias !6
- ; These two instructions don't alias (for domain !0, the set of scopes in
+ ; These two instructions may alias (for domain !0, the set of scopes in
; the !noalias list is not a superset of, or equal to, the scopes in the
; !alias.scope list):
- %2 = load float* %c, align 4, !alias.scope !6
+ %2 = load float, float* %c, align 4, !alias.scope !6
store float %0, float* %arrayidx.i, align 4, !noalias !7
'``fpmath``' Metadata
.. code-block:: llvm
- %a = load i8* %x, align 1, !range !0 ; Can only be 0 or 1
- %b = load i8* %y, align 1, !range !1 ; Can only be 255 (-1), 0 or 1
+ %a = load i8, i8* %x, align 1, !range !0 ; Can only be 0 or 1
+ %b = load i8, i8* %y, align 1, !range !1 ; Can only be 255 (-1), 0 or 1
%c = call i8 @foo(), !range !2 ; Can only be 0, 1, 3, 4 or 5
%d = invoke i8 @bar() to label %cont
unwind label %lpad, !range !3 ; Can only be -2, -1, 3, 4 or 5
!2 = !{ i8 0, i8 2, i8 3, i8 6 }
!3 = !{ i8 -2, i8 0, i8 3, i8 6 }
+'``unpredictable``' Metadata
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+``unpredictable`` metadata may be attached to any branch or switch
+instruction. It can be used to express the unpredictability of control
+flow. Similar to the llvm.expect intrinsic, it may be used to alter
+optimizations related to compare and branch instructions. The metadata
+is treated as a boolean value; if it exists, it signals that the branch
+or switch that it is attached to is completely unpredictable.
+
'``llvm.loop``'
^^^^^^^^^^^^^^^
Metadata prefixed with ``llvm.loop.vectorize`` or ``llvm.loop.interleave`` are
used to control per-loop vectorization and interleaving parameters such as
-vectorization width and interleave count. These metadata should be used in
-conjunction with ``llvm.loop`` loop identification metadata. The
+vectorization width and interleave count. These metadata should be used in
+conjunction with ``llvm.loop`` loop identification metadata. The
``llvm.loop.vectorize`` and ``llvm.loop.interleave`` metadata are only
optimization hints and the optimizer will only interleave and vectorize loops if
-it believes it is safe to do so. The ``llvm.mem.parallel_loop_access`` metadata
+it believes it is safe to do so. The ``llvm.mem.parallel_loop_access`` metadata
which contains information about loop-carried memory dependencies can be helpful
in determining the safety of these transformations.
!0 = !{!"llvm.loop.interleave.count", i32 4}
Note that setting ``llvm.loop.interleave.count`` to 1 disables interleaving
-multiple iterations of the loop. If ``llvm.loop.interleave.count`` is set to 0
+multiple iterations of the loop. If ``llvm.loop.interleave.count`` is set to 0
then the interleave count will be determined automatically.
'``llvm.loop.vectorize.enable``' Metadata
This metadata selectively enables or disables vectorization for the loop. The
first operand is the string ``llvm.loop.vectorize.enable`` and the second operand
-is a bit. If the bit operand value is 1 vectorization is enabled. A value of
+is a bit. If the bit operand value is 1 vectorization is enabled. A value of
0 disables vectorization:
.. code-block:: llvm
!0 = !{!"llvm.loop.vectorize.width", i32 4}
Note that setting ``llvm.loop.vectorize.width`` to 1 disables
-vectorization of the loop. If ``llvm.loop.vectorize.width`` is set to
+vectorization of the loop. If ``llvm.loop.vectorize.width`` is set to
0 or if the loop does not have this metadata the width will be
determined automatically.
'``llvm.loop.unroll.disable``' Metadata
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-This metadata either disables loop unrolling. The metadata has a single operand
-which is the string ``llvm.loop.unroll.disable``. For example:
+This metadata disables loop unrolling. The metadata has a single operand
+which is the string ``llvm.loop.unroll.disable``. For example:
.. code-block:: llvm
!0 = !{!"llvm.loop.unroll.disable"}
+'``llvm.loop.unroll.runtime.disable``' Metadata
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This metadata disables runtime loop unrolling. The metadata has a single
+operand which is the string ``llvm.loop.unroll.runtime.disable``. For example:
+
+.. code-block:: llvm
+
+ !0 = !{!"llvm.loop.unroll.runtime.disable"}
+
+'``llvm.loop.unroll.enable``' Metadata
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This metadata suggests that the loop should be fully unrolled if the trip count
+is known at compile time and partially unrolled if the trip count is not known
+at compile time. The metadata has a single operand which is the string
+``llvm.loop.unroll.enable``. For example:
+
+.. code-block:: llvm
+
+ !0 = !{!"llvm.loop.unroll.enable"}
+
'``llvm.loop.unroll.full``' Metadata
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-This metadata either suggests that the loop should be unrolled fully. The
-metadata has a single operand which is the string ``llvm.loop.unroll.disable``.
+This metadata suggests that the loop should be unrolled fully. The
+metadata has a single operand which is the string ``llvm.loop.unroll.full``.
For example:
.. code-block:: llvm
'``llvm.mem.parallel_loop_access``' Metadata
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-The ``llvm.mem.parallel_loop_access`` metadata refers to a loop identifier,
-or metadata containing a list of loop identifiers for nested loops.
-The metadata is attached to memory accessing instructions and denotes that
-no loop carried memory dependence exist between it and other instructions denoted
+The ``llvm.mem.parallel_loop_access`` metadata refers to a loop identifier,
+or metadata containing a list of loop identifiers for nested loops.
+The metadata is attached to memory accessing instructions and denotes that
+no loop carried memory dependence exist between it and other instructions denoted
with the same loop identifier.
-Precisely, given two instructions ``m1`` and ``m2`` that both have the
-``llvm.mem.parallel_loop_access`` metadata, with ``L1`` and ``L2`` being the
-set of loops associated with that metadata, respectively, then there is no loop
-carried dependence between ``m1`` and ``m2`` for loops in both ``L1`` and
+Precisely, given two instructions ``m1`` and ``m2`` that both have the
+``llvm.mem.parallel_loop_access`` metadata, with ``L1`` and ``L2`` being the
+set of loops associated with that metadata, respectively, then there is no loop
+carried dependence between ``m1`` and ``m2`` for loops in both ``L1`` and
``L2``.
-As a special case, if all memory accessing instructions in a loop have
-``llvm.mem.parallel_loop_access`` metadata that refers to that loop, then the
-loop has no loop carried memory dependences and is considered to be a parallel
-loop.
+As a special case, if all memory accessing instructions in a loop have
+``llvm.mem.parallel_loop_access`` metadata that refers to that loop, then the
+loop has no loop carried memory dependences and is considered to be a parallel
+loop.
-Note that if not all memory access instructions have such metadata referring to
-the loop, then the loop is considered not being trivially parallel. Additional
-memory dependence analysis is required to make that determination. As a fail
-safe mechanism, this causes loops that were originally parallel to be considered
-sequential (if optimization passes that are unaware of the parallel semantics
+Note that if not all memory access instructions have such metadata referring to
+the loop, then the loop is considered not being trivially parallel. Additional
+memory dependence analysis is required to make that determination. As a fail
+safe mechanism, this causes loops that were originally parallel to be considered
+sequential (if optimization passes that are unaware of the parallel semantics
insert new memory instructions into the loop body).
Example of a loop that is considered parallel due to its correct use of
for.body:
...
- %val0 = load i32* %arrayidx, !llvm.mem.parallel_loop_access !0
+ %val0 = load i32, i32* %arrayidx, !llvm.mem.parallel_loop_access !0
...
store i32 %val0, i32* %arrayidx1, !llvm.mem.parallel_loop_access !0
...
outer.for.body:
...
- %val1 = load i32* %arrayidx3, !llvm.mem.parallel_loop_access !2
+ %val1 = load i32, i32* %arrayidx3, !llvm.mem.parallel_loop_access !2
...
br label %inner.for.body
inner.for.body:
...
- %val0 = load i32* %arrayidx1, !llvm.mem.parallel_loop_access !0
+ %val0 = load i32, i32* %arrayidx1, !llvm.mem.parallel_loop_access !0
...
store i32 %val0, i32* %arrayidx2, !llvm.mem.parallel_loop_access !0
...
The ``llvm.bitsets`` global metadata is used to implement
:doc:`bitsets <BitSets>`.
+'``invariant.group``' Metadata
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The ``invariant.group`` metadata may be attached to ``load``/``store`` instructions.
+The existence of the ``invariant.group`` metadata on the instruction tells
+the optimizer that every ``load`` and ``store`` to the same pointer operand
+within the same invariant group can be assumed to load or store the same
+value (but see the ``llvm.invariant.group.barrier`` intrinsic which affects
+when two pointers are considered the same).
+
+Examples:
+
+.. code-block:: llvm
+
+ @unknownPtr = external global i8
+ ...
+ %ptr = alloca i8
+ store i8 42, i8* %ptr, !invariant.group !0
+ call void @foo(i8* %ptr)
+
+ %a = load i8, i8* %ptr, !invariant.group !0 ; Can assume that value under %ptr didn't change
+ call void @foo(i8* %ptr)
+ %b = load i8, i8* %ptr, !invariant.group !1 ; Can't assume anything, because group changed
+
+ %newPtr = call i8* @getPointer(i8* %ptr)
+ %c = load i8, i8* %newPtr, !invariant.group !0 ; Can't assume anything, because we only have information about %ptr
+
+ %unknownValue = load i8, i8* @unknownPtr
+ store i8 %unknownValue, i8* %ptr, !invariant.group !0 ; Can assume that %unknownValue == 42
+
+ call void @foo(i8* %ptr)
+ %newPtr2 = call i8* @llvm.invariant.group.barrier(i8* %ptr)
+ %d = load i8, i8* %newPtr2, !invariant.group !0 ; Can't step through invariant.group.barrier to get value of %ptr
+
+ ...
+ declare void @foo(i8*)
+ declare i8* @getPointer(i8*)
+ declare i8* @llvm.invariant.group.barrier(i8*)
+
+ !0 = !{!"magic ptr"}
+ !1 = !{!"other ptr"}
+
+
+
Module Flags Metadata
=====================
The terminator instructions are: ':ref:`ret <i_ret>`',
':ref:`br <i_br>`', ':ref:`switch <i_switch>`',
':ref:`indirectbr <i_indirectbr>`', ':ref:`invoke <i_invoke>`',
-':ref:`resume <i_resume>`', and ':ref:`unreachable <i_unreachable>`'.
+':ref:`resume <i_resume>`', ':ref:`catchswitch <i_catchswitch>`',
+':ref:`catchret <i_catchret>`',
+':ref:`cleanupret <i_cleanupret>`',
+and ':ref:`unreachable <i_unreachable>`'.
.. _i_ret:
::
<result> = invoke [cconv] [ret attrs] <ptr to function ty> <function ptr val>(<function args>) [fn attrs]
- to label <normal label> unwind label <exception label>
+ [operand bundles] to label <normal label> unwind label <exception label>
Overview:
"""""""""
#. The optional :ref:`function attributes <fnattrs>` list. Only
'``noreturn``', '``nounwind``', '``readonly``' and '``readnone``'
attributes are valid here.
+#. The optional :ref:`operand bundles <opbundles>` list.
Semantics:
""""""""""
establishes an association with a label, which is used by the runtime
library to unwind the stack.
-This instruction is used in languages with destructors to ensure that
-proper cleanup is performed in the case of either a ``longjmp`` or a
-thrown exception. Additionally, this is important for implementation of
-'``catch``' clauses in high-level languages that support them.
+This instruction is used in languages with destructors to ensure that
+proper cleanup is performed in the case of either a ``longjmp`` or a
+thrown exception. Additionally, this is important for implementation of
+'``catch``' clauses in high-level languages that support them.
+
+For the purposes of the SSA form, the definition of the value returned
+by the '``invoke``' instruction is deemed to occur on the edge from the
+current block to the "normal" label. If the callee unwinds then no
+return value is available.
+
+Example:
+""""""""
+
+.. code-block:: llvm
+
+ %retval = invoke i32 @Test(i32 15) to label %Continue
+ unwind label %TestCleanup ; i32:retval set
+ %retval = invoke coldcc i32 %Testfnptr(i32 15) to label %Continue
+ unwind label %TestCleanup ; i32:retval set
+
+.. _i_resume:
+
+'``resume``' Instruction
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+::
+
+ resume <type> <value>
+
+Overview:
+"""""""""
+
+The '``resume``' instruction is a terminator instruction that has no
+successors.
+
+Arguments:
+""""""""""
+
+The '``resume``' instruction requires one argument, which must have the
+same type as the result of any '``landingpad``' instruction in the same
+function.
+
+Semantics:
+""""""""""
+
+The '``resume``' instruction resumes propagation of an existing
+(in-flight) exception whose unwinding was interrupted with a
+:ref:`landingpad <i_landingpad>` instruction.
+
+Example:
+""""""""
+
+.. code-block:: llvm
+
+ resume { i8*, i32 } %exn
+
+.. _i_catchswitch:
+
+'``catchswitch``' Instruction
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+::
+
+ <resultval> = catchswitch within <parent> [ label <handler1>, label <handler2>, ... ] unwind to caller
+ <resultval> = catchswitch within <parent> [ label <handler1>, label <handler2>, ... ] unwind label <default>
+
+Overview:
+"""""""""
+
+The '``catchswitch``' instruction is used by `LLVM's exception handling system
+<ExceptionHandling.html#overview>`_ to describe the set of possible catch handlers
+that may be executed by the :ref:`EH personality routine <personalityfn>`.
+
+Arguments:
+""""""""""
+
+The ``parent`` argument is the token of the funclet that contains the
+``catchswitch`` instruction. If the ``catchswitch`` is not inside a funclet,
+this operand may be the token ``none``.
+
+The ``default`` argument is the label of another basic block beginning with a
+"pad" instruction, one of ``cleanuppad`` or ``catchswitch``.
+
+The ``handlers`` are a list of successor blocks that each begin with a
+:ref:`catchpad <i_catchpad>` instruction.
+
+Semantics:
+""""""""""
+
+Executing this instruction transfers control to one of the successors in
+``handlers``, if appropriate, or continues to unwind via the unwind label if
+present.
+
+The ``catchswitch`` is both a terminator and a "pad" instruction, meaning that
+it must be both the first non-phi instruction and last instruction in the basic
+block. Therefore, it must be the only non-phi instruction in the block.
+
+Example:
+""""""""
+
+.. code-block:: llvm
+
+ dispatch1:
+ %cs1 = catchswitch within none [label %handler0, label %handler1] unwind to caller
+ dispatch2:
+ %cs2 = catchswitch within %parenthandler [label %handler0] unwind label %cleanup
+
+.. _i_catchpad:
+
+'``catchpad``' Instruction
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+::
+
+ <resultval> = catchpad within <catchswitch> [<args>*]
+
+Overview:
+"""""""""
+
+The '``catchpad``' instruction is used by `LLVM's exception handling
+system <ExceptionHandling.html#overview>`_ to specify that a basic block
+begins a catch handler --- one where a personality routine attempts to transfer
+control to catch an exception.
+
+Arguments:
+""""""""""
+
+The ``catchswitch`` operand must always be a token produced by a
+:ref:`catchswitch <i_catchswitch>` instruction in a predecessor block. This
+ensures that each ``catchpad`` has exactly one predecessor block, and it always
+terminates in a ``catchswitch``.
+
+The ``args`` correspond to whatever information the personality routine
+requires to know if this is an appropriate handler for the exception. Control
+will transfer to the ``catchpad`` if this is the first appropriate handler for
+the exception.
+
+The ``resultval`` has the type :ref:`token <t_token>` and is used to match the
+``catchpad`` to corresponding :ref:`catchrets <i_catchret>` and other nested EH
+pads.
+
+Semantics:
+""""""""""
+
+When the call stack is being unwound due to an exception being thrown, the
+exception is compared against the ``args``. If it doesn't match, control will
+not reach the ``catchpad`` instruction. The representation of ``args`` is
+entirely target and personality function-specific.
+
+Like the :ref:`landingpad <i_landingpad>` instruction, the ``catchpad``
+instruction must be the first non-phi of its parent basic block.
+
+The meaning of the tokens produced and consumed by ``catchpad`` and other "pad"
+instructions is described in the
+`Windows exception handling documentation <ExceptionHandling.html#wineh>`.
+
+Executing a ``catchpad`` instruction constitutes "entering" that pad.
+The pad may then be "exited" in one of three ways:
+1) explicitly via a ``catchret`` that consumes it. Executing such a ``catchret``
+ is undefined behavior if any descendant pads have been entered but not yet
+ exited.
+2) implicitly via a call (which unwinds all the way to the current function's caller),
+ or via a ``catchswitch`` or a ``cleanupret`` that unwinds to caller.
+3) implicitly via an unwind edge whose destination EH pad isn't a descendant of
+ the ``catchpad``. When the ``catchpad`` is exited in this manner, it is
+ undefined behavior if the destination EH pad has a parent which is not an
+ ancestor of the ``catchpad`` being exited.
+
+Example:
+""""""""
+
+.. code-block:: llvm
+
+ dispatch:
+ %cs = catchswitch within none [label %handler0] unwind to caller
+ ;; A catch block which can catch an integer.
+ handler0:
+ %tok = catchpad within %cs [i8** @_ZTIi]
+
+.. _i_catchret:
+
+'``catchret``' Instruction
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+::
+
+ catchret from <token> to label <normal>
+
+Overview:
+"""""""""
+
+The '``catchret``' instruction is a terminator instruction that has a
+single successor.
+
+
+Arguments:
+""""""""""
+
+The first argument to a '``catchret``' indicates which ``catchpad`` it
+exits. It must be a :ref:`catchpad <i_catchpad>`.
+The second argument to a '``catchret``' specifies where control will
+transfer to next.
+
+Semantics:
+""""""""""
+
+The '``catchret``' instruction ends an existing (in-flight) exception whose
+unwinding was interrupted with a :ref:`catchpad <i_catchpad>` instruction. The
+:ref:`personality function <personalityfn>` gets a chance to execute arbitrary
+code to, for example, destroy the active exception. Control then transfers to
+``normal``.
-For the purposes of the SSA form, the definition of the value returned
-by the '``invoke``' instruction is deemed to occur on the edge from the
-current block to the "normal" label. If the callee unwinds then no
-return value is available.
+The ``token`` argument must be a token produced by a dominating ``catchpad``
+instruction. The ``catchret`` destroys the physical frame established by
+``catchpad``, so executing multiple returns on the same token without
+re-executing the ``catchpad`` will result in undefined behavior.
+See :ref:`catchpad <i_catchpad>` for more details.
Example:
""""""""
.. code-block:: llvm
- %retval = invoke i32 @Test(i32 15) to label %Continue
- unwind label %TestCleanup ; i32:retval set
- %retval = invoke coldcc i32 %Testfnptr(i32 15) to label %Continue
- unwind label %TestCleanup ; i32:retval set
+ catchret from %catch label %continue
-.. _i_resume:
+.. _i_cleanupret:
-'``resume``' Instruction
-^^^^^^^^^^^^^^^^^^^^^^^^
+'``cleanupret``' Instruction
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Syntax:
"""""""
::
- resume <type> <value>
+ cleanupret from <value> unwind label <continue>
+ cleanupret from <value> unwind to caller
Overview:
"""""""""
-The '``resume``' instruction is a terminator instruction that has no
-successors.
+The '``cleanupret``' instruction is a terminator instruction that has
+an optional successor.
+
Arguments:
""""""""""
-The '``resume``' instruction requires one argument, which must have the
-same type as the result of any '``landingpad``' instruction in the same
-function.
+The '``cleanupret``' instruction requires one argument, which indicates
+which ``cleanuppad`` it exits, and must be a :ref:`cleanuppad <i_cleanuppad>`.
+It also has an optional successor, ``continue``.
Semantics:
""""""""""
-The '``resume``' instruction resumes propagation of an existing
-(in-flight) exception whose unwinding was interrupted with a
-:ref:`landingpad <i_landingpad>` instruction.
+The '``cleanupret``' instruction indicates to the
+:ref:`personality function <personalityfn>` that one
+:ref:`cleanuppad <i_cleanuppad>` it transferred control to has ended.
+It transfers control to ``continue`` or unwinds out of the function.
+
+The unwind destination ``continue``, if present, must be an EH pad
+whose parent is either ``none`` or an ancestor of the ``cleanuppad``
+being returned from. This constitutes an exceptional exit from all
+ancestors of the completed ``cleanuppad``, up to but not including
+the parent of ``continue``.
+See :ref:`cleanuppad <i_cleanuppad>` for more details.
Example:
""""""""
.. code-block:: llvm
- resume { i8*, i32 } %exn
+ cleanupret from %cleanup unwind to caller
+ cleanupret from %cleanup unwind label %continue
.. _i_unreachable:
The value produced is ``op1`` \* 2\ :sup:`op2` mod 2\ :sup:`n`,
where ``n`` is the width of the result. If ``op2`` is (statically or
-dynamically) negative or equal to or larger than the number of bits in
+dynamically) equal to or larger than the number of bits in
``op1``, the result is undefined. If the arguments are vectors, each
vector element of ``op1`` is shifted by the corresponding shift amount
in ``op2``.
""""""""""
The first operand of an '``extractvalue``' instruction is a value of
-:ref:`struct <t_struct>` or :ref:`array <t_array>` type. The operands are
+:ref:`struct <t_struct>` or :ref:`array <t_array>` type. The other operands are
constant indices to specify which value to extract in a similar manner
as indices in a '``getelementptr``' instruction.
::
- <result> = load [volatile] <ty>* <pointer>[, align <alignment>][, !nontemporal !<index>][, !invariant.load !<index>][, !nonnull !<index>]
- <result> = load atomic [volatile] <ty>* <pointer> [singlethread] <ordering>, align <alignment>
+ <result> = load [volatile] <ty>, <ty>* <pointer>[, align <alignment>][, !nontemporal !<index>][, !invariant.load !<index>][, !invariant.group !<index>][, !nonnull !<index>][, !dereferenceable !<deref_bytes_node>][, !dereferenceable_or_null !<deref_bytes_node>][, !align !<align_node>]
+ <result> = load atomic [volatile] <ty>* <pointer> [singlethread] <ordering>, align <alignment> [, !invariant.group !<index>]
!<index> = !{ i32 1 }
+ !<deref_bytes_node> = !{i64 <dereferenceable_bytes>}
+ !<align_node> = !{ i64 <value_alignment> }
Overview:
"""""""""
""""""""""
The argument to the ``load`` instruction specifies the memory address
-from which to load. The pointer must point to a :ref:`first
+from which to load. The type specified must be a :ref:`first
class <t_firstclass>` type. If the ``load`` is marked as ``volatile``,
then the optimizer is not allowed to modify the number or order of
execution of this ``load`` with other :ref:`volatile
entries. The existence of the ``!invariant.load`` metadata on the
instruction tells the optimizer and code generator that the address
operand to this load points to memory which can be assumed unchanged.
-Being invariant does not imply that a location is dereferenceable,
-but it does imply that once the location is known dereferenceable
-its value is henceforth unchanging.
+Being invariant does not imply that a location is dereferenceable,
+but it does imply that once the location is known dereferenceable
+its value is henceforth unchanging.
+
+The optional ``!invariant.group`` metadata must reference a single metadata name
+ ``<index>`` corresponding to a metadata node. See ``invariant.group`` metadata.
The optional ``!nonnull`` metadata must reference a single
metadata name ``<index>`` corresponding to a metadata node with no
entries. The existence of the ``!nonnull`` metadata on the
instruction tells the optimizer that the value loaded is known to
-never be null. This is analogous to the ''nonnull'' attribute
-on parameters and return values. This metadata can only be applied
-to loads of a pointer type.
+never be null. This is analogous to the ``nonnull`` attribute
+on parameters and return values. This metadata can only be applied
+to loads of a pointer type.
+
+The optional ``!dereferenceable`` metadata must reference a single metadata
+name ``<deref_bytes_node>`` corresponding to a metadata node with one ``i64``
+entry. The existence of the ``!dereferenceable`` metadata on the instruction
+tells the optimizer that the value loaded is known to be dereferenceable.
+The number of bytes known to be dereferenceable is specified by the integer
+value in the metadata node. This is analogous to the ''dereferenceable''
+attribute on parameters and return values. This metadata can only be applied
+to loads of a pointer type.
+
+The optional ``!dereferenceable_or_null`` metadata must reference a single
+metadata name ``<deref_bytes_node>`` corresponding to a metadata node with one
+``i64`` entry. The existence of the ``!dereferenceable_or_null`` metadata on the
+instruction tells the optimizer that the value loaded is known to be either
+dereferenceable or null.
+The number of bytes known to be dereferenceable is specified by the integer
+value in the metadata node. This is analogous to the ''dereferenceable_or_null''
+attribute on parameters and return values. This metadata can only be applied
+to loads of a pointer type.
+
+The optional ``!align`` metadata must reference a single metadata name
+``<align_node>`` corresponding to a metadata node with one ``i64`` entry.
+The existence of the ``!align`` metadata on the instruction tells the
+optimizer that the value loaded is known to be aligned to a boundary specified
+by the integer value in the metadata node. The alignment must be a power of 2.
+This is analogous to the ''align'' attribute on parameters and return values.
+This metadata can only be applied to loads of a pointer type.
Semantics:
""""""""""
%ptr = alloca i32 ; yields i32*:ptr
store i32 3, i32* %ptr ; yields void
- %val = load i32* %ptr ; yields i32:val = i32 3
+ %val = load i32, i32* %ptr ; yields i32:val = i32 3
.. _i_store:
::
- store [volatile] <ty> <value>, <ty>* <pointer>[, align <alignment>][, !nontemporal !<index>] ; yields void
- store atomic [volatile] <ty> <value>, <ty>* <pointer> [singlethread] <ordering>, align <alignment> ; yields void
+ store [volatile] <ty> <value>, <ty>* <pointer>[, align <alignment>][, !nontemporal !<index>][, !invariant.group !<index>] ; yields void
+ store atomic [volatile] <ty> <value>, <ty>* <pointer> [singlethread] <ordering>, align <alignment> [, !invariant.group !<index>] ; yields void
Overview:
"""""""""
instructions to save cache bandwidth, such as the MOVNT instruction on
x86.
+The optional ``!invariant.group`` metadata must reference a
+single metadata name ``<index>``. See ``invariant.group`` metadata.
+
Semantics:
""""""""""
%ptr = alloca i32 ; yields i32*:ptr
store i32 3, i32* %ptr ; yields void
- %val = load i32* %ptr ; yields i32:val = i32 3
+ %val = load i32, i32* %ptr ; yields i32:val = i32 3
.. _i_fence:
.. code-block:: llvm
entry:
- %orig = atomic load i32* %ptr unordered ; yields i32
+ %orig = atomic load i32, i32* %ptr unordered ; yields i32
br label %loop
loop:
::
- <result> = getelementptr <
pty>* <ptrval>{, <ty> <idx>}*
- <result> = getelementptr inbounds <
pty>* <ptrval>{, <ty> <idx>}*
- <result> = getelementptr <ptr vector> ptrval, <vector index type> idx
+ <result> = getelementptr <
ty>, <ty>* <ptrval>{, <ty> <idx>}*
+ <result> = getelementptr inbounds <
ty>, <ty>* <ptrval>{, <ty> <idx>}*
+ <result> = getelementptr <ty>, <ptr vector> <ptrval>, <vector index type> <idx>
Overview:
"""""""""
The '``getelementptr``' instruction is used to get the address of a
subelement of an :ref:`aggregate <t_aggregate>` data structure. It performs
-address calculation only and does not access memory.
+address calculation only and does not access memory. The instruction can also
+be used to calculate a vector of such addresses.
Arguments:
""""""""""
-The first argument is always a pointer or a vector of pointers, and
-forms the basis of the calculation. The remaining arguments are indices
+The first argument is always a type used as the basis for the calculations.
+The second argument is always a pointer or a vector of pointers, and is the
+base address to start from. The remaining arguments are indices
that indicate which of the elements of the aggregate object are indexed.
The interpretation of each index is dependent on the type being indexed
into. The first index always indexes the pointer value given as the
define i32* @foo(%struct.ST* %s) nounwind uwtable readnone optsize ssp {
entry:
- %arrayidx = getelementptr inbounds %struct.ST* %s, i64 1, i32 2, i32 1, i64 5, i64 13
+ %arrayidx = getelementptr inbounds %struct.ST, %struct.ST* %s, i64 1, i32 2, i32 1, i64 5, i64 13
ret i32* %arrayidx
}
.. code-block:: llvm
define i32* @foo(%struct.ST* %s) {
- %t1 = getelementptr %struct.ST* %s, i32 1 ; yields %struct.ST*:%t1
- %t2 = getelementptr %struct.ST* %t1, i32 0, i32 2 ; yields %struct.RT*:%t2
- %t3 = getelementptr %struct.RT* %t2, i32 0, i32 1 ; yields [10 x [20 x i32]]*:%t3
- %t4 = getelementptr [10 x [20 x i32]]* %t3, i32 0, i32 5 ; yields [20 x i32]*:%t4
- %t5 = getelementptr [20 x i32]* %t4, i32 0, i32 13 ; yields i32*:%t5
+ %t1 = getelementptr %struct.ST, %struct.ST* %s, i32 1 ; yields %struct.ST*:%t1
+ %t2 = getelementptr %struct.ST, %struct.ST* %t1, i32 0, i32 2 ; yields %struct.RT*:%t2
+ %t3 = getelementptr %struct.RT, %struct.RT* %t2, i32 0, i32 1 ; yields [10 x [20 x i32]]*:%t3
+ %t4 = getelementptr [10 x [20 x i32]], [10 x [20 x i32]]* %t3, i32 0, i32 5 ; yields [20 x i32]*:%t4
+ %t5 = getelementptr [20 x i32], [20 x i32]* %t4, i32 0, i32 13 ; yields i32*:%t5
ret i32* %t5
}
.. code-block:: llvm
; yields [12 x i8]*:aptr
- %aptr = getelementptr {i32, [12 x i8]}* %saptr, i64 0, i32 1
+ %aptr = getelementptr {i32, [12 x i8]}, {i32, [12 x i8]}* %saptr, i64 0, i32 1
; yields i8*:vptr
- %vptr = getelementptr {i32, <2 x i8>}* %svptr, i64 0, i32 1, i32 1
+ %vptr = getelementptr {i32, <2 x i8>}, {i32, <2 x i8>}* %svptr, i64 0, i32 1, i32 1
; yields i8*:eptr
- %eptr = getelementptr [12 x i8]* %aptr, i64 0, i32 1
+ %eptr = getelementptr [12 x i8], [12 x i8]* %aptr, i64 0, i32 1
; yields i32*:iptr
- %iptr = getelementptr [10 x i32]* @arr, i16 0, i16 0
+ %iptr = getelementptr [10 x i32], [10 x i32]* @arr, i16 0, i16 0
-In cases where the pointer argument is a vector of pointers, each index
-must be a vector with the same number of elements. For example:
+Vector of pointers:
+"""""""""""""""""""
+
+The ``getelementptr`` returns a vector of pointers, instead of a single address,
+when one or more of its arguments is a vector. In such cases, all vector
+arguments should have the same number of elements, and every scalar argument
+will be effectively broadcast into a vector during address calculation.
+
+.. code-block:: llvm
+
+ ; All arguments are vectors:
+ ; A[i] = ptrs[i] + offsets[i]*sizeof(i8)
+ %A = getelementptr i8, <4 x i8*> %ptrs, <4 x i64> %offsets
+
+ ; Add the same scalar offset to each pointer of a vector:
+ ; A[i] = ptrs[i] + offset*sizeof(i8)
+ %A = getelementptr i8, <4 x i8*> %ptrs, i64 %offset
+
+ ; Add distinct offsets to the same pointer:
+ ; A[i] = ptr + offsets[i]*sizeof(i8)
+ %A = getelementptr i8, i8* %ptr, <4 x i64> %offsets
+
+ ; In all cases described above the type of the result is <4 x i8*>
+
+The two following instructions are equivalent:
+
+.. code-block:: llvm
+
+ getelementptr %struct.ST, <4 x %struct.ST*> %s, <4 x i64> %ind1,
+ <4 x i32> <i32 2, i32 2, i32 2, i32 2>,
+ <4 x i32> <i32 1, i32 1, i32 1, i32 1>,
+ <4 x i32> %ind4,
+ <4 x i64> <i64 13, i64 13, i64 13, i64 13>
+
+ getelementptr %struct.ST, <4 x %struct.ST*> %s, <4 x i64> %ind1,
+ i32 2, i32 1, <4 x i32> %ind4, i64 13
+
+Let's look at the C code, where the vector version of ``getelementptr``
+makes sense:
+
+.. code-block:: c
+
+ // Let's assume that we vectorize the following loop:
+ double *A, B; int *C;
+ for (int i = 0; i < size; ++i) {
+ A[i] = B[C[i]];
+ }
.. code-block:: llvm
- %A = getelementptr <4 x i8*> %ptrs, <4 x i64> %offsets,
+ ; get pointers for 8 elements from array B
+ %ptrs = getelementptr double, double* %B, <8 x i32> %C
+ ; load 8 elements from array B into A
+ %A = call <8 x double> @llvm.masked.gather.v8f64(<8 x double*> %ptrs,
+ i32 8, <8 x i1> %mask, <8 x double> %passthru)
Conversion Operations
---------------------
Semantics:
""""""""""
-The '``fptrunc``' instruction truncates a ``value`` from a larger
+The '``fptrunc``' instruction casts a ``value`` from a larger
:ref:`floating point <t_floating>` type to a smaller :ref:`floating
-point <t_floating>` type. If the value cannot fit within the
-destination type, ``ty2``, then the results are undefined.
+point <t_floating>` type. If the value cannot fit (i.e. overflows) within the
+destination type, ``ty2``, then the results are undefined. If the cast produces
+an inexact result, how rounding is performed (e.g. truncation, also known as
+round to zero) is undefined.
Example:
""""""""
""""""""""
The '``ptrtoint``' instruction takes a ``value`` to cast, which must be
-a a value of type :ref:`pointer <t_pointer>` or a vector of pointers, and a
+a value of type :ref:`pointer <t_pointer>` or a vector of pointers, and a
type to cast it to ``ty2``, which must be an :ref:`integer <t_integer>` or
a vector of integers type.
non-aggregate first class value, and a type to cast it to, which must
also be a non-aggregate :ref:`first class <t_firstclass>` type. The
bit sizes of ``value`` and the destination type, ``ty2``, must be
-identical. If the source type is a pointer, the destination type must
+identical. If the source type is a pointer, the destination type must
also be a pointer of the same size. This instruction supports bitwise
conversion of vectors to integers and to vectors of other types (as
long as they have the same size).
::
- <result> = fcmp <cond> <ty> <op1>, <op2> ; yields i1 or <N x i1>:result
+ <result> = fcmp [fast-math flags]* <cond> <ty> <op1>, <op2> ; yields i1 or <N x i1>:result
Overview:
"""""""""
#. ``uno``: yields ``true`` if either operand is a QNAN.
#. ``true``: always yields ``true``, regardless of operands.
+The ``fcmp`` instruction can also optionally take any number of
+:ref:`fast-math flags <fastmath>`, which are optimization hints to enable
+otherwise unsafe floating point optimizations.
+
+Any set of fast-math flags are legal on an ``fcmp`` instruction, but the
+only flags that have any effect on its semantics are those that allow
+assumptions to be made about the values of input arguments; namely
+``nnan``, ``ninf``, and ``nsz``. See :ref:`fastmath` for more information.
+
Example:
""""""""
::
- <result> = [tail | musttail] call [cconv] [ret attrs] <ty> [<fnty>*] <fnptrval>(<function args>) [fn attrs]
+ <result> = [tail | musttail | notail ] call [cconv] [ret attrs] <ty> [<fnty>*] <fnptrval>(<function args>) [fn attrs]
+ [ operand bundles ]
Overview:
"""""""""
This instruction requires several arguments:
#. The optional ``tail`` and ``musttail`` markers indicate that the optimizers
- should perform tail call optimization. The ``tail`` marker is a hint that
- `can be ignored <CodeGenerator.html#sibcallopt>`_. The ``musttail`` marker
+ should perform tail call optimization. The ``tail`` marker is a hint that
+ `can be ignored <CodeGenerator.html#sibcallopt>`_. The ``musttail`` marker
means that the call must be tail call optimized in order for the program to
- be correct. The ``musttail`` marker provides these guarantees:
+ be correct. The ``musttail`` marker provides these guarantees:
#. The call will not cause unbounded stack growth if it is part of a
recursive cycle in the call graph.
forwarded in place.
Both markers imply that the callee does not access allocas or varargs from
- the caller. Calls marked ``musttail`` must obey the following additional
+ the caller. Calls marked ``musttail`` must obey the following additional
rules:
- The call must immediately precede a :ref:`ret <i_ret>` instruction,
or a pointer bitcast followed by a ret instruction.
- The ret instruction must return the (possibly bitcasted) value
produced by the call or void.
- - The caller and callee prototypes must match. Pointer types of
+ - The caller and callee prototypes must match. Pointer types of
parameters or return types may differ in pointee type, but not
in address space.
- The calling conventions of the caller and callee must match.
- `Platform-specific constraints are
met. <CodeGenerator.html#tailcallopt>`_
+#. The optional ``notail`` marker indicates that the optimizers should not add
+ ``tail`` or ``musttail`` markers to the call. It is used to prevent tail
+ call optimization from being performed on the call.
+
#. The optional "cconv" marker indicates which :ref:`calling
convention <callingconv>` the call should use. If none is
specified, the call defaults to using C calling conventions. The
#. The optional :ref:`function attributes <fnattrs>` list. Only
'``noreturn``', '``nounwind``', '``readonly``' and '``readnone``'
attributes are valid here.
+#. The optional :ref:`operand bundles <opbundles>` list.
Semantics:
""""""""""
::
- <resultval> = landingpad <resultty> personality <type> <pers_fn> <clause>+
- <resultval> = landingpad <resultty> personality <type> <pers_fn> cleanup <clause>*
+ <resultval> = landingpad <resultty> <clause>+
+ <resultval> = landingpad <resultty> cleanup <clause>*
<clause> := catch <type> <value>
<clause> := filter <array constant type> <array constant>
system <ExceptionHandling.html#overview>`_ to specify that a basic block
is a landing pad --- one where the exception lands, and corresponds to the
code found in the ``catch`` portion of a ``try``/``catch`` sequence. It
-defines values supplied by the personality function (``pers_fn``) upon
+defines values supplied by the :ref:`personality function <personalityfn>` upon
re-entry to the function. The ``resultval`` has the type ``resultty``.
Arguments:
""""""""""
-This instruction takes a ``pers_fn`` value. This is the personality
-function associated with the unwinding mechanism. The optional
+The optional
``cleanup`` flag indicates that the landing pad block is a cleanup.
A ``clause`` begins with the clause type --- ``catch`` or ``filter`` --- and
""""""""""
The '``landingpad``' instruction defines the values which are set by the
-personality function (``pers_fn``) upon re-entry to the function, and
+:ref:`personality function <personalityfn>` upon re-entry to the function, and
therefore the "result type" of the ``landingpad`` instruction. As with
calling conventions, how the personality function results are
represented in LLVM IR is target specific.
pad block.
- A basic block that is not a landing pad block may not include a
'``landingpad``' instruction.
-- All '``landingpad``' instructions in a function must have the same
- personality function.
Example:
""""""""
.. code-block:: llvm
;; A landing pad which can catch an integer.
- %res = landingpad { i8*, i32 } personality i32 (...)* @__gxx_personality_v0
+ %res = landingpad { i8*, i32 }
catch i8** @_ZTIi
;; A landing pad that is a cleanup.
- %res = landingpad { i8*, i32 } personality i32 (...)* @__gxx_personality_v0
+ %res = landingpad { i8*, i32 }
cleanup
;; A landing pad which can catch an integer and can only throw a double.
- %res = landingpad { i8*, i32 } personality i32 (...)* @__gxx_personality_v0
+ %res = landingpad { i8*, i32 }
catch i8** @_ZTIi
filter [1 x i8**] [@_ZTId]
+.. _i_cleanuppad:
+
+'``cleanuppad``' Instruction
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+::
+
+ <resultval> = cleanuppad within <parent> [<args>*]
+
+Overview:
+"""""""""
+
+The '``cleanuppad``' instruction is used by `LLVM's exception handling
+system <ExceptionHandling.html#overview>`_ to specify that a basic block
+is a cleanup block --- one where a personality routine attempts to
+transfer control to run cleanup actions.
+The ``args`` correspond to whatever additional
+information the :ref:`personality function <personalityfn>` requires to
+execute the cleanup.
+The ``resultval`` has the type :ref:`token <t_token>` and is used to
+match the ``cleanuppad`` to corresponding :ref:`cleanuprets <i_cleanupret>`.
+The ``parent`` argument is the token of the funclet that contains the
+``cleanuppad`` instruction. If the ``cleanuppad`` is not inside a funclet,
+this operand may be the token ``none``.
+
+Arguments:
+""""""""""
+
+The instruction takes a list of arbitrary values which are interpreted
+by the :ref:`personality function <personalityfn>`.
+
+Semantics:
+""""""""""
+
+When the call stack is being unwound due to an exception being thrown,
+the :ref:`personality function <personalityfn>` transfers control to the
+``cleanuppad`` with the aid of the personality-specific arguments.
+As with calling conventions, how the personality function results are
+represented in LLVM IR is target specific.
+
+The ``cleanuppad`` instruction has several restrictions:
+
+- A cleanup block is a basic block which is the unwind destination of
+ an exceptional instruction.
+- A cleanup block must have a '``cleanuppad``' instruction as its
+ first non-PHI instruction.
+- There can be only one '``cleanuppad``' instruction within the
+ cleanup block.
+- A basic block that is not a cleanup block may not include a
+ '``cleanuppad``' instruction.
+
+Executing a ``cleanuppad`` instruction constitutes "entering" that pad.
+The pad may then be "exited" in one of three ways:
+1) explicitly via a ``cleanupret`` that consumes it. Executing such a ``cleanupret``
+ is undefined behavior if any descendant pads have been entered but not yet
+ exited.
+2) implicitly via a call (which unwinds all the way to the current function's caller),
+ or via a ``catchswitch`` or a ``cleanupret`` that unwinds to caller.
+3) implicitly via an unwind edge whose destination EH pad isn't a descendant of
+ the ``cleanuppad``. When the ``cleanuppad`` is exited in this manner, it is
+ undefined behavior if the destination EH pad has a parent which is not an
+ ancestor of the ``cleanuppad`` being exited.
+
+It is undefined behavior for the ``cleanuppad`` to exit via an unwind edge which
+does not transitively unwind to the same destination as a constituent
+``cleanupret``.
+
+Example:
+""""""""
+
+.. code-block:: llvm
+
+ %tok = cleanuppad within %cs []
+
.. _intrinsics:
Intrinsic Functions
--------------------------------------
LLVM's support for `Accurate Garbage Collection <GarbageCollection.html>`_
-(GC) requires the frontend to generate code containing appropriate intrinsic
-calls and select an appropriate GC strategy which knows how to lower these
+(GC) requires the frontend to generate code containing appropriate intrinsic
+calls and select an appropriate GC strategy which knows how to lower these
intrinsics in a manner which is appropriate for the target collector.
These intrinsics allow identification of :ref:`GC roots on the
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
LLVM provides an second experimental set of intrinsics for describing garbage
-collection safepoints in compiled code. These intrinsics are an alternative
-to the ``llvm.gcroot`` intrinsics, but are compatible with the ones for
-:ref:`read <int_gcread>` and :ref:`write <int_gcwrite>` barriers. The
-differences in approach are covered in the `Garbage Collection with LLVM
-<GarbageCollection.html>`_ documentation. The intrinsics themselves are
+collection safepoints in compiled code. These intrinsics are an alternative
+to the ``llvm.gcroot`` intrinsics, but are compatible with the ones for
+:ref:`read <int_gcread>` and :ref:`write <int_gcwrite>` barriers. The
+differences in approach are covered in the `Garbage Collection with LLVM
+<GarbageCollection.html>`_ documentation. The intrinsics themselves are
described in :doc:`Statepoints`.
.. _int_gcroot:
other aggressive transformations, so the value returned may not be that
of the obvious source-language caller.
-'``llvm.frameallocate``' and '``llvm.framerecover``' Intrinsics
+'``llvm.localescape``' and '``llvm.localrecover``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Syntax:
::
- declare i8* @llvm.frameallocate(i32 %size)
- declare i8* @llvm.framerecover(i8* %func, i8* %fp)
+ declare void @llvm.localescape(...)
+ declare i8* @llvm.localrecover(i8* %func, i8* %fp, i32 %idx)
Overview:
"""""""""
-The '``llvm.frameallocate``' intrinsic allocates stack memory at some fixed
-offset from the frame pointer, and the '``llvm.framerecover``'
-intrinsic applies that offset to a live frame pointer to recover the address of
-the allocation. The offset is computed during frame layout of the caller of
-``llvm.frameallocate``.
+The '``llvm.localescape``' intrinsic escapes offsets of a collection of static
+allocas, and the '``llvm.localrecover``' intrinsic applies those offsets to a
+live frame pointer to recover the address of the allocation. The offset is
+computed during frame layout of the caller of ``llvm.localescape``.
Arguments:
""""""""""
-The ``size`` argument to '``llvm.frameallocate``' must be a constant integer
-indicating the amount of stack memory to allocate. As with allocas, allocating
-zero bytes is legal, but the result is undefined.
+All arguments to '``llvm.localescape``' must be pointers to static allocas or
+casts of static allocas. Each function can only call '``llvm.localescape``'
+once, and it can only do so from the entry block.
-The ``func`` argument to '``llvm.framerecover``' must be a constant
+The ``func`` argument to '``llvm.localrecover``' must be a constant
bitcasted pointer to a function defined in the current module. The code
generator cannot determine the frame allocation offset of functions defined in
other modules.
-The ``fp`` argument to '``llvm.framerecover``' must be a frame
-pointer of a call frame that is currently live. The return value of
-'``llvm.frameaddress``' is one way to produce such a value, but most platforms
-also expose the frame pointer through stack unwinding mechanisms.
+The ``fp`` argument to '``llvm.localrecover``' must be a frame pointer of a
+call frame that is currently live. The return value of '``llvm.localaddress``'
+is one way to produce such a value, but various runtimes also expose a suitable
+pointer in platform-specific ways.
+
+The ``idx`` argument to '``llvm.localrecover``' indicates which alloca passed to
+'``llvm.localescape``' to recover. It is zero-indexed.
Semantics:
""""""""""
-These intrinsics allow a group of functions to access one stack memory
-allocation in an ancestor stack frame. The memory returned from
-'``llvm.frameallocate``' may be allocated prior to stack realignment, so the
-memory is only aligned to the ABI-required stack alignment. Each function may
-only call '``llvm.frameallocate``' one or zero times from the function entry
-block. The frame allocation intrinsic inhibits inlining, as any frame
-allocations in the inlined function frame are likely to be at a different
-offset from the one used by '``llvm.framerecover``' called with the
-uninlined function.
+These intrinsics allow a group of functions to share access to a set of local
+stack allocations of a one parent function. The parent function may call the
+'``llvm.localescape``' intrinsic once from the function entry block, and the
+child functions can use '``llvm.localrecover``' to access the escaped allocas.
+The '``llvm.localescape``' intrinsic blocks inlining, as inlining changes where
+the escaped allocas are allocated, which would break attempts to use
+'``llvm.localrecover``'.
.. _int_read_register:
.. _int_write_register:
See the description for :ref:`llvm.stacksave <int_stacksave>`.
+.. _int_get_dynamic_area_offset:
+
+'``llvm.get.dynamic.area.offset``' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+::
+
+ declare i32 @llvm.get.dynamic.area.offset.i32()
+ declare i64 @llvm.get.dynamic.area.offset.i64()
+
+ Overview:
+ """""""""
+
+ The '``llvm.get.dynamic.area.offset.*``' intrinsic family is used to
+ get the offset from native stack pointer to the address of the most
+ recent dynamic alloca on the caller's stack. These intrinsics are
+ intendend for use in combination with
+ :ref:`llvm.stacksave <int_stacksave>` to get a
+ pointer to the most recent dynamic alloca. This is useful, for example,
+ for AddressSanitizer's stack unpoisoning routines.
+
+Semantics:
+""""""""""
+
+ These intrinsics return a non-negative integer value that can be used to
+ get the address of the most recent dynamic alloca, allocated by :ref:`alloca <i_alloca>`
+ on the caller's stack. In particular, for targets where stack grows downwards,
+ adding this offset to the native stack pointer would get the address of the most
+ recent dynamic alloca. For targets where stack grows upwards, the situation is a bit more
+ complicated, because substracting this value from stack pointer would get the address
+ one past the end of the most recent dynamic alloca.
+
+ Although for most targets `llvm.get.dynamic.area.offset <int_get_dynamic_area_offset>`
+ returns just a zero, for others, such as PowerPC and PowerPC64, it returns a
+ compile-time-known constant value.
+
+ The return value type of :ref:`llvm.get.dynamic.area.offset <int_get_dynamic_area_offset>`
+ must match the target's generic address space's (address space 0) pointer type.
+
'``llvm.prefetch``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
format that can be written out by a compiler runtime and consumed via
the ``llvm-profdata`` tool.
+'``llvm.instrprof_value_profile``' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+::
+
+ declare void @llvm.instrprof_value_profile(i8* <name>, i64 <hash>,
+ i64 <value>, i32 <value_kind>,
+ i32 <index>)
+
+Overview:
+"""""""""
+
+The '``llvm.instrprof_value_profile``' intrinsic can be emitted by a
+frontend for use with instrumentation based profiling. This will be
+lowered by the ``-instrprof`` pass to find out the target values,
+instrumented expressions take in a program at runtime.
+
+Arguments:
+""""""""""
+
+The first argument is a pointer to a global variable containing the
+name of the entity being instrumented. ``name`` should generally be the
+(mangled) function name for a set of counters.
+
+The second argument is a hash value that can be used by the consumer
+of the profile data to detect changes to the instrumented source. It
+is an error if ``hash`` differs between two instances of
+``llvm.instrprof_*`` that refer to the same name.
+
+The third argument is the value of the expression being profiled. The profiled
+expression's value should be representable as an unsigned 64-bit value. The
+fourth argument represents the kind of value profiling that is being done. The
+supported value profiling kinds are enumerated through the
+``InstrProfValueKind`` type declared in the
+``<include/llvm/ProfileData/InstrProf.h>`` header file. The last argument is the
+index of the instrumented expression within ``name``. It should be >= 0.
+
+Semantics:
+""""""""""
+
+This intrinsic represents the point where a call to a runtime routine
+should be inserted for value profiling of target expressions. ``-instrprof``
+pass will generate the appropriate data structures and replace the
+``llvm.instrprof_value_profile`` intrinsic with the call to the profile
+runtime library with proper arguments.
+
Standard C Library Intrinsics
-----------------------------
LLVM provides intrinsics for a few important bit manipulation
operations. These allow efficient code generation for some algorithms.
+'``llvm.bitreverse.*``' Intrinsics
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+This is an overloaded intrinsic function. You can use bitreverse on any
+integer type.
+
+::
+
+ declare i16 @llvm.bitreverse.i16(i16 <id>)
+ declare i32 @llvm.bitreverse.i32(i32 <id>)
+ declare i64 @llvm.bitreverse.i64(i64 <id>)
+
+Overview:
+"""""""""
+
+The '``llvm.bitreverse``' family of intrinsics is used to reverse the
+bitpattern of an integer value; for example ``0b1234567`` becomes
+``0b7654321``.
+
+Semantics:
+""""""""""
+
+The ``llvm.bitreverse.iN`` intrinsic returns an i16 value that has bit
+``M`` in the input moved to bit ``N-M`` in the output.
+
'``llvm.bswap.*``' Intrinsics
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
``is_zero_undef == 0`` and ``undef`` otherwise. For example,
``llvm.cttz(2) = 1``.
+.. _int_overflow:
+
Arithmetic with Overflow Intrinsics
-----------------------------------
Specialised Arithmetic Intrinsics
---------------------------------
+'``llvm.canonicalize.*``' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+::
+
+ declare float @llvm.canonicalize.f32(float %a)
+ declare double @llvm.canonicalize.f64(double %b)
+
+Overview:
+"""""""""
+
+The '``llvm.canonicalize.*``' intrinsic returns the platform specific canonical
+encoding of a floating point number. This canonicalization is useful for
+implementing certain numeric primitives such as frexp. The canonical encoding is
+defined by IEEE-754-2008 to be:
+
+::
+
+ 2.1.8 canonical encoding: The preferred encoding of a floating-point
+ representation in a format. Applied to declets, significands of finite
+ numbers, infinities, and NaNs, especially in decimal formats.
+
+This operation can also be considered equivalent to the IEEE-754-2008
+conversion of a floating-point value to the same format. NaNs are handled
+according to section 6.2.
+
+Examples of non-canonical encodings:
+
+- x87 pseudo denormals, pseudo NaNs, pseudo Infinity, Unnormals. These are
+ converted to a canonical representation per hardware-specific protocol.
+- Many normal decimal floating point numbers have non-canonical alternative
+ encodings.
+- Some machines, like GPUs or ARMv7 NEON, do not support subnormal values.
+ These are treated as non-canonical encodings of zero and with be flushed to
+ a zero of the same sign by this operation.
+
+Note that per IEEE-754-2008 6.2, systems that support signaling NaNs with
+default exception handling must signal an invalid exception, and produce a
+quiet NaN result.
+
+This function should always be implementable as multiplication by 1.0, provided
+that the compiler does not constant fold the operation. Likewise, division by
+1.0 and ``llvm.minnum(x, x)`` are possible implementations. Addition with
+-0.0 is also sufficient provided that the rounding mode is not -Infinity.
+
+``@llvm.canonicalize`` must preserve the equality relation. That is:
+
+- ``(@llvm.canonicalize(x) == x)`` is equivalent to ``(x == x)``
+- ``(@llvm.canonicalize(x) == @llvm.canonicalize(y))`` is equivalent to
+ to ``(x == y)``
+
+Additionally, the sign of zero must be conserved:
+``@llvm.canonicalize(-0.0) = -0.0`` and ``@llvm.canonicalize(+0.0) = +0.0``
+
+The payload bits of a NaN must be conserved, with two exceptions.
+First, environments which use only a single canonical representation of NaN
+must perform said canonicalization. Second, SNaNs must be quieted per the
+usual methods.
+
+The canonicalization operation may be optimized away if:
+
+- The input is known to be canonical. For example, it was produced by a
+ floating-point operation that is required by the standard to be canonical.
+- The result is consumed only by (or fused with) other floating-point
+ operations. That is, the bits of the floating point value are not examined.
+
'``llvm.fmuladd.*``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. code-block:: llvm
- %a = load i16* @x, align 2
+ %a = load i16, i16* @x, align 2
%res = call float @llvm.convert.from.fp16(i16 %a)
.. _dbg_intrinsics:
.. code-block:: llvm
%tramp = alloca [10 x i8], align 4 ; size and alignment only correct for X86
- %tramp1 = getelementptr [10 x i8]* %tramp, i32 0, i32 0
+ %tramp1 = getelementptr [10 x i8], [10 x i8]* %tramp, i32 0, i32 0
call i8* @llvm.init.trampoline(i8* %tramp1, i8* bitcast (i32 (i8*, i32, i32)* @f to i8*), i8* %nval)
%p = call i8* @llvm.adjust.trampoline(i8* %tramp1)
%fp = bitcast i8* %p to i32 (i32, i32)*
after performing the required machine specific adjustments. The pointer
returned can then be :ref:`bitcast and executed <int_trampoline>`.
+.. _int_mload_mstore:
+
Masked Vector Load and Store Intrinsics
---------------------------------------
Syntax:
"""""""
-This is an overloaded intrinsic. The loaded data is a vector of any integer or floating point data type.
+This is an overloaded intrinsic. The loaded data is a vector of any integer, floating point or pointer data type.
::
- declare <16 x float> @llvm.masked.load.v16f32 (<16 x float>* <ptr>, i32 <alignment>, <16 x i1> <mask>, <16 x float> <passthru>)
- declare <2 x double> @llvm.masked.load.v2f64 (<2 x double>* <ptr>, i32 <alignment>, <2 x i1> <mask>, <2 x double> <passthru>)
+ declare <16 x float> @llvm.masked.load.v16f32 (<16 x float>* <ptr>, i32 <alignment>, <16 x i1> <mask>, <16 x float> <passthru>)
+ declare <2 x double> @llvm.masked.load.v2f64 (<2 x double>* <ptr>, i32 <alignment>, <2 x i1> <mask>, <2 x double> <passthru>)
+ ;; The data is a vector of pointers to double
+ declare <8 x double*> @llvm.masked.load.v8p0f64 (<8 x double*>* <ptr>, i32 <alignment>, <8 x i1> <mask>, <8 x double*> <passthru>)
+ ;; The data is a vector of function pointers
+ declare <8 x i32 ()*> @llvm.masked.load.v8p0f_i32f (<8 x i32 ()*>* <ptr>, i32 <alignment>, <8 x i1> <mask>, <8 x i32 ()*> <passthru>)
Overview:
"""""""""
-Reads a vector from memory according to the provided mask. The mask holds a bit for each vector lane, and is used to prevent memory accesses to the masked-off lanes. The masked-off lanes in the result vector are taken from the corresponding lanes in the passthru operand.
+Reads a vector from memory according to the provided mask. The mask holds a bit for each vector lane, and is used to prevent memory accesses to the masked-off lanes. The masked-off lanes in the result vector are taken from the corresponding lanes of the '``passthru``' operand.
Arguments:
""""""""""
-The first operand is the base pointer for the load. The second operand is the alignment of the source location. It must be a constant integer value. The third operand, mask, is a vector of boolean 'i1' values with the same number of elements as the return type. The fourth is a pass-through value that is used to fill the masked-off lanes of the result. The return type, underlying type of the base pointer and the type of passthru operand are the same vector types.
+The first operand is the base pointer for the load. The second operand is the alignment of the source location. It must be a constant integer value. The third operand, mask, is a vector of boolean values with the same number of elements as the return type. The fourth is a pass-through value that is used to fill the masked-off lanes of the result. The return type, underlying type of the base pointer and the type of the '``passthru``' operand are the same vector types.
Semantics:
::
%res = call <16 x float> @llvm.masked.load.v16f32 (<16 x float>* %ptr, i32 4, <16 x i1>%mask, <16 x float> %passthru)
-
+
;; The result of the two following instructions is identical aside from potential memory access exception
- %loadlal = load <16 x float>* %ptr, align 4
+ %loadlal = load <16 x float>, <16 x float>* %ptr, align 4
%res = select <16 x i1> %mask, <16 x float> %loadlal, <16 x float> %passthru
.. _int_mstore:
Syntax:
"""""""
-This is an overloaded intrinsic. The data stored in memory is a vector of any integer or floating point data type.
+This is an overloaded intrinsic. The data stored in memory is a vector of any integer, floating point or pointer data type.
::
- declare void @llvm.masked.store.v8i32 (<8 x i32> <value>, <8 x i32> * <ptr>, i32 <alignment>, <8 x i1> <mask>)
- declare void @llvm.masked.store.v16f32(<16 x i32> <value>, <16 x i32>* <ptr>, i32 <alignment>, <16 x i1> <mask>)
+ declare void @llvm.masked.store.v8i32 (<8 x i32> <value>, <8 x i32>* <ptr>, i32 <alignment>, <8 x i1> <mask>)
+ declare void @llvm.masked.store.v16f32 (<16 x float> <value>, <16 x float>* <ptr>, i32 <alignment>, <16 x i1> <mask>)
+ ;; The data is a vector of pointers to double
+ declare void @llvm.masked.store.v8p0f64 (<8 x double*> <value>, <8 x double*>* <ptr>, i32 <alignment>, <8 x i1> <mask>)
+ ;; The data is a vector of function pointers
+ declare void @llvm.masked.store.v4p0f_i32f (<4 x i32 ()*> <value>, <4 x i32 ()*>* <ptr>, i32 <alignment>, <4 x i1> <mask>)
Overview:
"""""""""
::
call void @llvm.masked.store.v16f32(<16 x float> %value, <16 x float>* %ptr, i32 4, <16 x i1> %mask)
-
+
;; The result of the following instructions is identical aside from potential data races and memory access exceptions
- %oldval = load <16 x float>* %ptr, align 4
+ %oldval = load <16 x float>, <16 x float>* %ptr, align 4
%res = select <16 x i1> %mask, <16 x float> %value, <16 x float> %oldval
store <16 x float> %res, <16 x float>* %ptr, align 4
+Masked Vector Gather and Scatter Intrinsics
+-------------------------------------------
+
+LLVM provides intrinsics for vector gather and scatter operations. They are similar to :ref:`Masked Vector Load and Store <int_mload_mstore>`, except they are designed for arbitrary memory accesses, rather than sequential memory accesses. Gather and scatter also employ a mask operand, which holds one bit per vector element, switching the associated vector lane on or off. The memory addresses corresponding to the "off" lanes are not accessed. When all bits are off, no memory is accessed.
+
+.. _int_mgather:
+
+'``llvm.masked.gather.*``' Intrinsics
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+This is an overloaded intrinsic. The loaded data are multiple scalar values of any integer, floating point or pointer data type gathered together into one vector.
+
+::
+
+ declare <16 x float> @llvm.masked.gather.v16f32 (<16 x float*> <ptrs>, i32 <alignment>, <16 x i1> <mask>, <16 x float> <passthru>)
+ declare <2 x double> @llvm.masked.gather.v2f64 (<2 x double*> <ptrs>, i32 <alignment>, <2 x i1> <mask>, <2 x double> <passthru>)
+ declare <8 x float*> @llvm.masked.gather.v8p0f32 (<8 x float**> <ptrs>, i32 <alignment>, <8 x i1> <mask>, <8 x float*> <passthru>)
+
+Overview:
+"""""""""
+
+Reads scalar values from arbitrary memory locations and gathers them into one vector. The memory locations are provided in the vector of pointers '``ptrs``'. The memory is accessed according to the provided mask. The mask holds a bit for each vector lane, and is used to prevent memory accesses to the masked-off lanes. The masked-off lanes in the result vector are taken from the corresponding lanes of the '``passthru``' operand.
+
+
+Arguments:
+""""""""""
+
+The first operand is a vector of pointers which holds all memory addresses to read. The second operand is an alignment of the source addresses. It must be a constant integer value. The third operand, mask, is a vector of boolean values with the same number of elements as the return type. The fourth is a pass-through value that is used to fill the masked-off lanes of the result. The return type, underlying type of the vector of pointers and the type of the '``passthru``' operand are the same vector types.
+
+
+Semantics:
+""""""""""
+
+The '``llvm.masked.gather``' intrinsic is designed for conditional reading of multiple scalar values from arbitrary memory locations in a single IR operation. It is useful for targets that support vector masked gathers and allows vectorizing basic blocks with data and control divergence. Other targets may support this intrinsic differently, for example by lowering it into a sequence of scalar load operations.
+The semantics of this operation are equivalent to a sequence of conditional scalar loads with subsequent gathering all loaded values into a single vector. The mask restricts memory access to certain lanes and facilitates vectorization of predicated basic blocks.
+
+
+::
+
+ %res = call <4 x double> @llvm.masked.gather.v4f64 (<4 x double*> %ptrs, i32 8, <4 x i1>%mask, <4 x double> <true, true, true, true>)
+
+ ;; The gather with all-true mask is equivalent to the following instruction sequence
+ %ptr0 = extractelement <4 x double*> %ptrs, i32 0
+ %ptr1 = extractelement <4 x double*> %ptrs, i32 1
+ %ptr2 = extractelement <4 x double*> %ptrs, i32 2
+ %ptr3 = extractelement <4 x double*> %ptrs, i32 3
+
+ %val0 = load double, double* %ptr0, align 8
+ %val1 = load double, double* %ptr1, align 8
+ %val2 = load double, double* %ptr2, align 8
+ %val3 = load double, double* %ptr3, align 8
+
+ %vec0 = insertelement <4 x double>undef, %val0, 0
+ %vec01 = insertelement <4 x double>%vec0, %val1, 1
+ %vec012 = insertelement <4 x double>%vec01, %val2, 2
+ %vec0123 = insertelement <4 x double>%vec012, %val3, 3
+
+.. _int_mscatter:
+
+'``llvm.masked.scatter.*``' Intrinsics
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+This is an overloaded intrinsic. The data stored in memory is a vector of any integer, floating point or pointer data type. Each vector element is stored in an arbitrary memory address. Scatter with overlapping addresses is guaranteed to be ordered from least-significant to most-significant element.
+
+::
+
+ declare void @llvm.masked.scatter.v8i32 (<8 x i32> <value>, <8 x i32*> <ptrs>, i32 <alignment>, <8 x i1> <mask>)
+ declare void @llvm.masked.scatter.v16f32 (<16 x float> <value>, <16 x float*> <ptrs>, i32 <alignment>, <16 x i1> <mask>)
+ declare void @llvm.masked.scatter.v4p0f64 (<4 x double*> <value>, <4 x double**> <ptrs>, i32 <alignment>, <4 x i1> <mask>)
+
+Overview:
+"""""""""
+
+Writes each element from the value vector to the corresponding memory address. The memory addresses are represented as a vector of pointers. Writing is done according to the provided mask. The mask holds a bit for each vector lane, and is used to prevent memory accesses to the masked-off lanes.
+
+Arguments:
+""""""""""
+
+The first operand is a vector value to be written to memory. The second operand is a vector of pointers, pointing to where the value elements should be stored. It has the same underlying type as the value operand. The third operand is an alignment of the destination addresses. The fourth operand, mask, is a vector of boolean values. The types of the mask and the value operand must have the same number of vector elements.
+
+
+Semantics:
+""""""""""
+
+The '``llvm.masked.scatter``' intrinsics is designed for writing selected vector elements to arbitrary memory addresses in a single IR operation. The operation may be conditional, when not all bits in the mask are switched on. It is useful for targets that support vector masked scatter and allows vectorizing basic blocks with data and control divergence. Other targets may support this intrinsic differently, for example by lowering it into a sequence of branches that guard scalar store operations.
+
+::
+
+ ;; This instruction unconditionaly stores data vector in multiple addresses
+ call @llvm.masked.scatter.v8i32 (<8 x i32> %value, <8 x i32*> %ptrs, i32 4, <8 x i1> <true, true, .. true>)
+
+ ;; It is equivalent to a list of scalar stores
+ %val0 = extractelement <8 x i32> %value, i32 0
+ %val1 = extractelement <8 x i32> %value, i32 1
+ ..
+ %val7 = extractelement <8 x i32> %value, i32 7
+ %ptr0 = extractelement <8 x i32*> %ptrs, i32 0
+ %ptr1 = extractelement <8 x i32*> %ptrs, i32 1
+ ..
+ %ptr7 = extractelement <8 x i32*> %ptrs, i32 7
+ ;; Note: the order of the following stores is important when they overlap:
+ store i32 %val0, i32* %ptr0, align 4
+ store i32 %val1, i32* %ptr1, align 4
+ ..
+ store i32 %val7, i32* %ptr7, align 4
+
+
Memory Use Markers
------------------
This intrinsic indicates that the memory is mutable again.
+'``llvm.invariant.group.barrier``' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+::
+
+ declare i8* @llvm.invariant.group.barrier(i8* <ptr>)
+
+Overview:
+"""""""""
+
+The '``llvm.invariant.group.barrier``' intrinsic can be used when an invariant
+established by invariant.group metadata no longer holds, to obtain a new pointer
+value that does not carry the invariant information.
+
+
+Arguments:
+""""""""""
+
+The ``llvm.invariant.group.barrier`` takes only one argument, which is
+the pointer to the memory for which the ``invariant.group`` no longer holds.
+
+Semantics:
+""""""""""
+
+Returns another pointer that aliases its argument but which is considered different
+for the purposes of ``load``/``store`` ``invariant.group`` metadata.
+
General Intrinsics
------------------
This intrinsic is lowered to the ``val``.
+.. _int_assume:
+
'``llvm.assume``' Intrinsic
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
""""""""""
The first argument is a pointer to be tested. The second argument is a
-metadata string containing the name of a :doc:`bitset <BitSets>`.
+metadata object representing an identifier for a :doc:`bitset <BitSets>`.
Overview:
"""""""""
projects / oota-llvm.git / blobdiff