VPATH=$(PROJ_SRC_DIR)
#--------------------------------------------------------------------
-# Reset the list of suffixes we know how to build
+# Reset the list of suffixes we know how to build.
#--------------------------------------------------------------------
.SUFFIXES:
.SUFFIXES: .c .cpp .cc .h .hpp .y .l .lo .o .a .bc .td .ps .dot .ll
ifneq ($(MakefileCommonIn),)
PreConditions += $(MakefileCommon)
endif
+
ifneq ($(MakefileConfigIn),)
PreConditions += $(MakefileConfig)
endif
#------------------------------------------------------------------------
$(filter-out clean clean-local,$(UserTargets)):: $(BUILT_SOURCES)
-clean-local::
+clean-all-local::
ifneq ($(strip $(BUILT_SOURCES)),)
-$(Verb) $(RM) -f $(BUILT_SOURCES)
endif
# Variables derived from configuration we are building
#--------------------------------------------------------------------
+CPP.Defines :=
+# OPTIMIZE_OPTION - The optimization level option we want to build LLVM with
+# this can be overridden on the make command line.
+ifneq ($(OS),MingW)
+ OPTIMIZE_OPTION := -O3
+else
+ OPTIMIZE_OPTION := -O2
+endif
ifdef ENABLE_PROFILING
BuildMode := Profile
- CXX.Flags := -O3 -DNDEBUG -felide-constructors -finline-functions -pg
- C.Flags := -O3 -DNDEBUG -pg
- LD.Flags := -O3 -DNDEBUG -pg
+ CXX.Flags := $(OPTIMIZE_OPTION) -pg -g
+ C.Flags := $(OPTIMIZE_OPTION) -pg -g
+ LD.Flags := $(OPTIMIZE_OPTION) -pg -g
+ KEEP_SYMBOLS := 1
else
- ifdef ENABLE_OPTIMIZED
+ ifeq ($(ENABLE_OPTIMIZED),1)
BuildMode := Release
- # Don't use -fomit-frame-pointer on FreeBSD
+ # Don't use -fomit-frame-pointer on Darwin or FreeBSD.
ifneq ($(OS),FreeBSD)
+ ifneq ($(OS),Darwin)
OmitFramePointer := -fomit-frame-pointer
endif
- CXX.Flags := -O3 -DNDEBUG -finline-functions -felide-constructors \
- $(OmitFramePointer)
- C.Flags := -O3 -DNDEBUG $(OmitFramePointer)
- LD.Flags := -O3 -DNDEBUG
+ endif
+
+ # Darwin requires -fstrict-aliasing to be explicitly enabled.
+ ifeq ($(OS),Darwin)
+ EXTRA_OPTIONS += -fstrict-aliasing
+ endif
+
+ CXX.Flags := $(OPTIMIZE_OPTION) $(OmitFramePointer)
+ C.Flags := $(OPTIMIZE_OPTION) $(OmitFramePointer)
+ LD.Flags := $(OPTIMIZE_OPTION)
else
BuildMode := Debug
- CXX.Flags := -g -D_DEBUG
- C.Flags := -g -D_DEBUG
- LD.Flags := -g -D_DEBUG
+ CXX.Flags := -g
+ C.Flags := -g
+ LD.Flags := -g
KEEP_SYMBOLS := 1
endif
endif
-CXX.Flags += $(CXXFLAGS)
-C.Flags += $(CFLAGS)
-CPP.Flags += $(CPPFLAGS)
-LD.Flags += $(LDFLAGS)
-AR.Flags := cru
+# IF REQUIRES_EH=1 is specified then don't disable exceptions
+ifndef REQUIRES_EH
+ CXX.Flags += -fno-exceptions
+endif
+
+# IF REQUIRES_RTTI=1 is specified then don't disable run-time type id
+ifndef REQUIRES_RTTI
+# CXX.Flags += -fno-rtti
+endif
+
+# If DISABLE_ASSERTIONS=1 is specified (make command line or configured),
+# then disable assertions by defining the appropriate preprocessor symbols.
+ifdef DISABLE_ASSERTIONS
+ BuildMode := $(BuildMode)-Asserts
+ CPP.Defines += -DNDEBUG
+else
+ CPP.Defines += -D_DEBUG
+endif
+
+# If ENABLE_EXPENSIVE_CHECKS=1 is specified (make command line or
+# configured), then enable expensive checks by defining the
+# appropriate preprocessor symbols.
+ifdef ENABLE_EXPENSIVE_CHECKS
+ BuildMode := $(BuildMode)+Checks
+ CPP.Defines += -D_GLIBCXX_DEBUG
+endif
+
+ifeq ($(ENABLE_PIC),1)
+ CXX.Flags += -fPIC
+ C.Flags += -fPIC
+endif
+
+CXX.Flags += $(CXXFLAGS) -Woverloaded-virtual
+C.Flags += $(CFLAGS)
+CPP.Defines += $(CPPFLAGS)
+CPP.BaseFlags += $(CPP.Defines)
+LD.Flags += $(LDFLAGS)
+AR.Flags := cru
LibTool.Flags := --tag=CXX
-#Make Floating point ieee complient on alpha
+# Make Floating point IEEE compliant on Alpha.
ifeq ($(ARCH),Alpha)
- CXX.Flags += -mieee
- CPP.Flags += -mieee
+ CXX.Flags += -mieee
+ CPP.BaseFlags += -mieee
+ifeq ($(ENABLE_PIC),0)
+ CXX.Flags += -fPIC
+ CPP.BaseFlags += -fPIC
+endif
+endif
+
+ifeq ($(ARCH),Alpha)
+ LD.Flags += -Wl,--no-relax
endif
#--------------------------------------------------------------------
ifndef LLVMAS
LLVMAS := $(LLVMToolDir)/llvm-as$(EXEEXT)
endif
-ifndef BURG
-BURG := $(LLVMToolDir)/burg$(EXEEXT)
-endif
ifndef TBLGEN
-TBLGEN := $(LLVMToolDir)/tblgen$(EXEEXT)
-endif
-ifndef GCCAS
-GCCAS := $(LLVMToolDir)/gccas$(EXEEXT)
+ ifeq ($(LLVM_CROSS_COMPILING),1)
+ TBLGEN := $(LLVMToolDir)/tblgen$(BUILD_EXEEXT)
+ else
+ TBLGEN := $(LLVMToolDir)/tblgen$(EXEEXT)
+ endif
endif
-ifndef GCCLD
-GCCLD := $(LLVMToolDir)/gccld$(EXEEXT)
+LLVM_CONFIG := $(LLVMToolDir)/llvm-config
+ifndef LLVMLD
+LLVMLD := $(LLVMToolDir)/llvm-ld$(EXEEXT)
endif
-ifndef LDIS
+ifndef LLVMDIS
LLVMDIS := $(LLVMToolDir)/llvm-dis$(EXEEXT)
endif
ifndef LLI
ifndef LBUGPOINT
LBUGPOINT := $(LLVMToolDir)/bugpoint$(EXEEXT)
endif
-
+ifndef LUPGRADE
+LUPGRADE := $(LLVMToolDir)/llvm-upgrade$(EXEEXT)
+endif
+ifeq ($(LLVMGCC_MAJVERS),3)
+UPGRADE_MSG = $(Echo) "Upgrading $(1) assembly to latest."
+UPGRADE_LL = $(Verb)$(LUPGRADE) $(1) -o $(1).up.tmp -f ; $(MV) $(1).up.tmp $(1)
LLVMGCCWITHPATH := PATH="$(LLVMToolDir):$(PATH)" $(LLVMGCC)
LLVMGXXWITHPATH := PATH="$(LLVMToolDir):$(PATH)" $(LLVMGXX)
+else
+UPGRADE_MSG =
+UPGRADE_LL =
+LLVMGCCWITHPATH := $(LLVMGCC)
+LLVMGXXWITHPATH := $(LLVMGXX)
+endif
#--------------------------------------------------------------------
# Adjust to user's request
# Adjust LD.Flags and Libtool.Flags depending on the kind of library that is
# to be built. Note that if LOADABLE_MODULE is specified then the resulting
-# shared library can be opened with dlopen
+# shared library can be opened with dlopen. Also, LOADABLE_MODULE implies
+# several other things so we force them to be defined/on.
+ifdef LOADABLE_MODULE
+ SHARED_LIBRARY := 1
+ DONT_BUILD_RELINKED := 1
+ LINK_LIBS_IN_SHARED := 1
+ LD.Flags += -module
+endif
+
ifdef SHARED_LIBRARY
LD.Flags += -rpath $(LibDir)
- ifdef LOADABLE_MODULE
- LD.Flags += -module
- endif
else
LibTool.Flags += --tag=disable-shared
endif
# Options To Invoke Tools
#----------------------------------------------------------
-CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused
+CompileCommonOpts := -pedantic -Wall -W -Wwrite-strings -Wno-long-long \
+ -Wunused -Wno-unused-parameter $(EXTRA_OPTIONS)
ifeq ($(OS),HP-UX)
- CompileCommonOpts += -D_REENTRANT -D_HPUX_SOURCE
+ CompileCommonOpts := -D_REENTRANT -D_HPUX_SOURCE
endif
-LD.Flags += -L$(LibDir) -L$(LLVMLibDir)
-CPP.Flags += -I$(PROJ_OBJ_DIR) -I$(PROJ_SRC_DIR) \
- -I$(PROJ_OBJ_ROOT)/include \
- -I$(PROJ_SRC_ROOT)/include \
- -I$(LLVM_OBJ_ROOT)/include \
- -I$(LLVM_SRC_ROOT)/include \
- -D_GNU_SOURCE -D__STDC_LIMIT_MACROS
+# If we are building a universal binary on Mac OS/X, pass extra options. This
+# is useful to people that want to link the LLVM libraries into their universal
+# apps.
+#
+# The following can be optionally specified:
+# UNIVERSAL_SDK_PATH variable can be specified as a path to the SDK to use.
+# For Mac OS/X 10.4 Intel machines, the traditional one is:
+# UNIVERSAL_SDK_PATH=/Developer/SDKs/MacOSX10.4u.sdk/
+# UNIVERSAL_ARCH can be optionally specified to be a list of architectures
+# to build for, e.g. UNIVERSAL_ARCH="i386 ppc ppc64". This defaults to
+# i386/ppc only.
+ifdef UNIVERSAL
+ ifndef UNIVERSAL_ARCH
+ UNIVERSAL_ARCH := i386 ppc
+ endif
+ UNIVERSAL_ARCH_OPTIONS := $(UNIVERSAL_ARCH:%=-arch %)
+ CompileCommonOpts += $(UNIVERSAL_ARCH_OPTIONS)
+ Relink.Flags := $(UNIVERSAL_ARCH_OPTIONS:%=-XCClinker %)
+ ifdef UNIVERSAL_SDK_PATH
+ CompileCommonOpts += -isysroot $(UNIVERSAL_SDK_PATH)
+ Relink.Flags += -XCClinker -isysroot -XCClinker $(UNIVERSAL_SDK_PATH)
+ endif
+
+ # Building universal cannot compute dependencies automatically.
+ DISABLE_AUTO_DEPENDENCIES=1
+endif
-Compile.C = $(CC) $(CPP.Flags) $(CompileCommonOpts) -c $(C.Flags)
+LD.Flags += -L$(LibDir) -L$(LLVMLibDir)
+CPP.BaseFlags += -D_GNU_SOURCE -D__STDC_LIMIT_MACROS
+# All -I flags should go here, so that they don't confuse llvm-config.
+CPP.Flags += -I$(PROJ_OBJ_DIR) -I$(PROJ_SRC_DIR) \
+ -I$(PROJ_OBJ_ROOT)/include \
+ -I$(PROJ_SRC_ROOT)/include \
+ -I$(LLVM_OBJ_ROOT)/include \
+ -I$(LLVM_SRC_ROOT)/include \
+ $(CPP.BaseFlags)
+
+Compile.C = $(CC) $(CPP.Flags) $(C.Flags) $(CompileCommonOpts) -c
LTCompile.C = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.C)
-BCCompile.C = $(LLVMGCCWITHPATH) $(CPP.Flags) $(CompileCommonOpts) \
- $(C.Flags)
-Preprocess.C = $(CC) $(CPP.Flags) $(CompileCommonOpts) -E $(C.Flags)
+BCCompile.C = $(LLVMGCCWITHPATH) $(CPP.Flags) $(C.Flags) $(CompileCommonOpts)
+Preprocess.C = $(CC) $(CPP.Flags) $(C.Flags) $(CompileCommonOpts) -E
-Compile.CXX = $(CXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -c
+Compile.CXX = $(CXX) $(CPP.Flags) $(CXX.Flags) $(CompileCommonOpts) -c
LTCompile.CXX = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.CXX)
-BCCompile.CXX = $(LLVMGXXWITHPATH) $(CPP.Flags) $(CompileCommonOpts) \
- $(CXX.Flags)
-Preprocess.CXX= $(CXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -E
-Link = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
- $(CompileCommonOpts) $(LD.Flags) $(Strip)
-Relink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
+BCCompile.CXX = $(LLVMGXXWITHPATH) $(CPP.Flags) $(CXX.Flags) \
$(CompileCommonOpts)
+
+Preprocess.CXX= $(CXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -E
+Link = $(CXX) $(CPP.Flags) $(CXX.Flags) $(CompileCommonOpts) \
+ $(LD.Flags) $(Strip)
+LTLink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(Link)
+Relink = $(CXX) $(CPP.Flags) $(CXX.Flags) $(CompileCommonOpts) \
+ $(Relink.Flags)
+LTRelink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(Relink)
LTInstall = $(LIBTOOL) $(LibTool.Flags) --mode=install $(INSTALL) \
$(Install.Flags)
ProgInstall = $(INSTALL) $(Install.StripFlag) -m 0755
+ScriptInstall = $(INSTALL) -m 0755
DataInstall = $(INSTALL) -m 0644
-Burg = $(BURG) -I $(PROJ_SRC_DIR)
-TableGen = $(TBLGEN) -I $(PROJ_SRC_DIR)
+TableGen = $(TBLGEN) -I $(PROJ_SRC_DIR) -I$(PROJ_SRC_ROOT)/include \
+ -I $(PROJ_SRC_ROOT)/lib/Target
Archive = $(AR) $(AR.Flags)
LArchive = $(LLVMToolDir)/llvm-ar rcsf
ifdef RANLIB
SubDirs :=
ifdef DIRS
SubDirs += $(DIRS)
+
+ifneq ($(PROJ_SRC_ROOT),$(PROJ_OBJ_ROOT))
$(RecursiveTargets)::
$(Verb) for dir in $(DIRS); do \
if [ ! -f $$dir/Makefile ]; then \
$(MKDIR) $$dir; \
$(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
- if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
- ($(MAKE) -C $$dir $@ ) || exit 1; \
- fi ; \
+ ($(MAKE) -C $$dir $@ ) || exit 1; \
done
+else
+$(RecursiveTargets)::
+ $(Verb) for dir in $(DIRS); do \
+ ($(MAKE) -C $$dir $@ ) || exit 1; \
+ done
+endif
+
endif
#---------------------------------------------------------
$(MKDIR) $$dir; \
$(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
- if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
- ($(MAKE) -C $$dir $@ ) || exit 0; \
- fi ; \
+ ($(MAKE) -C $$dir $@ ) || exit 0; \
done
endif
$(MKDIR) $(@D); \
$(CP) $(PROJ_SRC_DIR)/$(@D)/Makefile $(@D)/Makefile; \
fi; \
- if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
- $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@) ; \
- fi
+ $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@)
endif
#---------------------------------------------------------
SubDirs += $(OPTIONAL_DIRS)
+ifneq ($(PROJ_SRC_ROOT),$(PROJ_OBJ_ROOT))
$(RecursiveTargets)::
$(Verb) for dir in $(OPTIONAL_DIRS); do \
if [ -d $(PROJ_SRC_DIR)/$$dir ]; then\
$(MKDIR) $$dir; \
$(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
- if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
- ($(MAKE) -C$$dir $@ ) || exit 1; \
- fi ; \
+ ($(MAKE) -C$$dir $@ ) || exit 1; \
fi \
done
+else
+$(RecursiveTargets)::
+ $(Verb) for dir in $(OPTIONAL_DIRS); do \
+ ($(MAKE) -C$$dir $@ ) || exit 1; \
+ done
+endif
endif
#---------------------------------------------------------
#---------------------------------------------------------
ifdef CONFIG_FILES
+ifdef NO_INSTALL
+install-local::
+ $(Echo) Install circumvented with NO_INSTALL
+uninstall-local::
+ $(Echo) UnInstall circumvented with NO_INSTALL
+else
install-local:: $(PROJ_etcdir) $(CONFIG_FILES)
$(Echo) Installing Configuration Files To $(PROJ_etcdir)
$(Verb)for file in $(CONFIG_FILES); do \
$(Verb)for file in $(CONFIG_FILES); do \
$(RM) -f $(PROJ_etcdir)/$${file} ; \
done
+endif
endif
# Set up variables for building libararies
###############################################################################
-#---------------------------------------------------------
-# Handle the special "JIT" value for LLVM_LIBS which is a
-# shorthand for a bunch of libraries that get the correct
-# JIT support for a library or a tool that runs JIT.
-#---------------------------------------------------------
-ifeq ($(LLVMLIBS),JIT)
-
-# Make sure we can get our own symbols in the tool
-Link += -dlopen self
-
-# Generic JIT libraries
-JIT_LIBS := LLVMInterpreter LLVMJIT LLVMCodeGen LLVMExecutionEngine
-
-# You can enable the X86 JIT on a non-X86 host by setting the flag
-# ENABLE_X86_JIT on the make command line. If not, it will still be
-# enabled automagically on an X86 host.
-ifeq ($(ARCH), x86)
- ENABLE_X86_JIT = 1
-endif
-
-# What the X86 JIT requires
-ifdef ENABLE_X86_JIT
- JIT_LIBS += LLVMX86 LLVMSelectionDAG
-endif
-
-# You can enable the SparcV9 JIT on a non-SparcV9 host by setting the flag
-# ENABLE_SPARCV9_JIT on the make command line. If not, it will still be
-# enabled automagically on an SparcV9 host.
-ifeq ($(ARCH), Sparc)
- ENABLE_SPARCV9_JIT = 1
-endif
-
-# What the Sparc JIT requires
-ifdef ENABLE_SPARCV9_JIT
- JIT_LIBS += LLVMSparcV9 LLVMSparcV9ModuloSched LLVMSparcV9InstrSched \
- LLVMSparcV9LiveVar LLVMInstrumentation.a \
- LLVMBCWriter LLVMTransforms.a LLVMipo.a LLVMipa.a \
- LLVMDataStructure LLVMSparcV9RegAlloc
-endif
-
-# You can enable the PowerPC JIT on a non-PowerPC host by setting the flag
-# ENABLE_PPC_JIT on the make command line. If not, it will still be
-# enabled automagically on an PowerPC host.
-ifeq ($(ARCH), PowerPC)
- ENABLE_PPC_JIT = 1
-endif
-
-# What the PowerPC JIT requires
-ifdef ENABLE_PPC_JIT
- JIT_LIBS += LLVMPowerPC LLVMSelectionDAG
-endif
-
-# You can enable the Alpha JIT on a non-Alpha host by setting the flag
-# ENABLE_ALPHA_JIT on the make command line. If not, it will still be
-# enabled automagically on an Alpha host.
-ifeq ($(ARCH), Alpha)
- ENABLE_ALPHA_JIT = 1
-endif
-
-# What the Alpha JIT requires
-ifdef ENABLE_ALPHA_JIT
- JIT_LIBS += LLVMAlpha LLVMSelectionDAG
-endif
-
-LLVMLIBS := $(JIT_LIBS) LLVMScalarOpts.a LLVMTransformUtils.a LLVMAnalysis.a \
- LLVMBCReader LLVMCore LLVMSupport.a LLVMTarget.a LLVMbzip2 \
- LLVMSystem.a $(PLATFORMLIBDL)
-endif
-
#---------------------------------------------------------
# Define various command line options pertaining to the
# libraries needed when linking. There are "Proj" libs
# (defined by the user's project) and "LLVM" libs (defined
-# by the # LLVM project).
+# by the LLVM project).
#---------------------------------------------------------
-# Some versions of gcc on Alpha produce too many symbols, so use a .a file
-ifeq ($(ARCH),Alpha)
-USEDLIBS := $(subst LLVMCore, LLVMCore.a, $(USEDLIBS))
-LLVMLIBS := $(subst LLVMCore, LLVMCore.a, $(LLVMLIBS))
-endif
+ifdef USEDLIBS
ProjLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
ProjLibsOptions := $(patsubst %.o, $(LibDir)/%.o, $(ProjLibsOptions))
+ProjUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
+ProjLibsPaths := $(addprefix $(LibDir)/,$(ProjUsedLibs))
+endif
+
+ifdef LLVMLIBS
LLVMLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS)))
LLVMLibsOptions := $(patsubst %.o, $(LLVMLibDir)/%.o, $(LLVMLibsOptions))
-ProjUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
LLVMUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS)))
-ProjLibsPaths := $(addprefix $(LibDir)/,$(ProjUsedLibs))
LLVMLibsPaths := $(addprefix $(LLVMLibDir)/,$(LLVMUsedLibs))
+endif
+
+ifeq ($(strip $(filter clean clean-local dist-clean,$(MAKECMDGOALS))),)
+ifdef LINK_COMPONENTS
+
+# If LLVM_CONFIG doesn't exist, build it. This can happen if you do a make
+# clean in tools, then do a make in tools (instead of at the top level).
+$(LLVM_CONFIG):
+ @echo "*** llvm-config doesn't exist - rebuilding it."
+ @$(MAKE) -C $(PROJ_OBJ_ROOT)/tools/llvm-config
+
+$(ToolDir)/$(strip $(TOOLNAME))$(EXEEXT): $(LLVM_CONFIG)
+
+ProjLibsOptions += $(shell $(LLVM_CONFIG) --libs $(LINK_COMPONENTS))
+ProjLibsPaths += $(LLVM_CONFIG) \
+ $(shell $(LLVM_CONFIG) --libfiles $(LINK_COMPONENTS))
+endif
+endif
###############################################################################
# Library Build Rules: Four ways to build a library
else
Module := $(LibDir)/$(MODULE_NAME).bc
-LinkModule := $(GCCLD)
+LinkModule := $(LLVMLD) -L$(CFERuntimeLibDir)
+
ifdef EXPORTED_SYMBOL_FILE
LinkModule += -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
endif
-$(Module): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir $(GCCLD)
+$(Module): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir $(LLVMLD)
$(Echo) Building $(BuildMode) Bytecode Module $(notdir $@)
$(Verb) $(LinkModule) -o $@ $(ObjectsBC)
ModuleDestDir := $(PROJ_libdir)
endif
+ifdef NO_INSTALL
+install-local::
+ $(Echo) Install circumvented with NO_INSTALL
+uninstall-local::
+ $(Echo) Uninstall circumvented with NO_INSTALL
+else
DestModule := $(ModuleDestDir)/$(MODULE_NAME).bc
install-module:: $(DestModule)
uninstall-local::
$(Echo) Uninstalling $(BuildMode) Bytecode Module $(DestModule)
-$(Verb) $(RM) -f $(DestModule)
+endif
endif
endif
all-local:: $(LibName.LA)
ifdef LINK_LIBS_IN_SHARED
+ifdef LOADABLE_MODULE
+SharedLibKindMessage := "Loadable Module"
+else
+SharedLibKindMessage := "Shared Library"
+endif
$(LibName.LA): $(ObjectsLO) $(LibDir)/.dir
- $(Echo) Linking $(BuildMode) Shared Library $(LIBRARYNAME)$(SHLIBEXT)
- $(Verb) $(Link) -o $@ $(ObjectsLO) \
- $(ProjLibsOptions) $(LLVMLibsOptions)
+ $(Echo) Linking $(BuildMode) $(SharedLibKindMessage) \
+ $(LIBRARYNAME)$(SHLIBEXT)
+ $(Verb) $(LTLink) -o $@ $(ObjectsLO) $(ProjLibsOptions) \
+ $(LLVMLibsOptions)
$(Verb) $(LTInstall) $@ $(LibDir)
else
$(LibName.LA): $(ObjectsLO) $(LibDir)/.dir
$(Echo) Linking $(BuildMode) Shared Library $(LIBRARYNAME)$(SHLIBEXT)
- $(Verb) $(Link) -o $@ $(ObjectsLO)
+ $(Verb) $(LTLink) -o $@ $(ObjectsLO)
$(Verb) $(LTInstall) $@ $(LibDir)
endif
-$(Verb) $(RM) -f $(LibName.LA)
endif
+ifdef NO_INSTALL
+install-local::
+ $(Echo) Install circumvented with NO_INSTALL
+uninstall-local::
+ $(Echo) Uninstall circumvented with NO_INSTALL
+else
DestSharedLib = $(PROJ_libdir)/lib$(LIBRARYNAME)$(SHLIBEXT)
install-local:: $(DestSharedLib)
uninstall-local::
$(Echo) Uninstalling $(BuildMode) Shared Library $(DestSharedLib)
-$(Verb) $(RM) -f $(PROJ_libdir)/lib$(LIBRARYNAME).*
-
+endif
endif
#---------------------------------------------------------
all-local:: $(LibName.BCA)
ifdef EXPORTED_SYMBOL_FILE
-BCLinkLib = $(GCCLD) -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
+BCLinkLib = $(LLVMLD) -L$(CFERuntimeLibDir) \
+ -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
-$(LibName.BCA): $(ObjectsBC) $(LibDir)/.dir $(GCCLD) \
+$(LibName.BCA): $(ObjectsBC) $(LibDir)/.dir $(LLVMLD) \
$(LLVMToolDir)/llvm-ar
$(Echo) Building $(BuildMode) Bytecode Archive $(notdir $@) \
"(internalize)"
install-bytecode-local:: $(DestBytecodeLib)
+ifdef NO_INSTALL
+install-local::
+ $(Echo) Install circumvented with NO_INSTALL
+uninstall-local::
+ $(Echo) Uninstall circumvented with NO_INSTALL
+else
install-local:: $(DestBytecodeLib)
$(DestBytecodeLib): $(BytecodeDestDir) $(LibName.BCA)
uninstall-local::
$(Echo) Uninstalling $(BuildMode) Bytecode Archive $(DestBytecodeLib)
-$(Verb) $(RM) -f $(DestBytecodeLib)
-
+endif
endif
endif
$(LibName.O): $(ObjectsO) $(LibDir)/.dir
$(Echo) Linking $(BuildMode) Object Library $(notdir $@)
- $(Verb) $(Relink) -o $@ $(ObjectsO)
+ $(Verb) $(LTRelink) -o $@ $(ObjectsO)
clean-local::
ifneq ($(strip $(LibName.O)),)
-$(Verb) $(RM) -f $(LibName.O)
endif
+ifdef NO_INSTALL
+install-local::
+ $(Echo) Install circumvented with NO_INSTALL
+uninstall-local::
+ $(Echo) Uninstall circumvented with NO_INSTALL
+else
DestRelinkedLib = $(PROJ_libdir)/$(LIBRARYNAME).o
install-local:: $(DestRelinkedLib)
uninstall-local::
$(Echo) Uninstalling $(BuildMode) Object Library $(DestRelinkedLib)
-$(Verb) $(RM) -f $(DestRelinkedLib)
-
+endif
endif
#---------------------------------------------------------
-$(Verb) $(RM) -f $(LibName.A)
endif
+ifdef NO_INSTALL
+install-local::
+ $(Echo) Install circumvented with NO_INSTALL
+uninstall-local::
+ $(Echo) Uninstall circumvented with NO_INSTALL
+else
DestArchiveLib := $(PROJ_libdir)/lib$(LIBRARYNAME).a
install-local:: $(DestArchiveLib)
uninstall-local::
$(Echo) Uninstalling $(BuildMode) Archive Library $(DestArchiveLib)
-$(Verb) $(RM) -f $(DestArchiveLib)
-
+endif
endif
# endif LIBRARYNAME
ToolBuildPath := $(ToolDir)/$(strip $(TOOLNAME))$(EXEEXT)
endif
-#---------------------------------------------------------
-# Tell make that we need to rebuild subdirectories before
-# we can link the tool. This affects things like LLI which
-# has library subdirectories.
-#---------------------------------------------------------
-$(ToolBuildPath): $(addsuffix /.makeall, $(PARALLEL_DIRS))
-
#---------------------------------------------------------
# Provide targets for building the tools
#---------------------------------------------------------
$(ToolBuildPath): $(ObjectsO) $(ProjLibsPaths) $(LLVMLibsPaths)
$(Echo) Linking $(BuildMode) executable $(TOOLNAME) $(StripWarnMsg)
- $(Verb) $(Link) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(ProjLibsOptions) \
- $(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB) $(LIBS)
+ $(Verb) $(LTLink) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(ProjLibsOptions) \
+ $(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB) $(LIBS)
$(Echo) ======= Finished Linking $(BuildMode) Executable $(TOOLNAME) \
$(StripWarnMsg)
+ifdef NO_INSTALL
+install-local::
+ $(Echo) Install circumvented with NO_INSTALL
+uninstall-local::
+ $(Echo) Uninstall circumvented with NO_INSTALL
+else
DestTool = $(PROJ_bindir)/$(TOOLNAME)
install-local:: $(DestTool)
uninstall-local::
$(Echo) Uninstalling $(BuildMode) $(DestTool)
-$(Verb) $(RM) -f $(DestTool)
-
+endif
endif
###############################################################################
# Object Build Rules: Build object files based on sources
###############################################################################
+# FIXME: This should be checking for "if not GCC or ICC", not for "if HP-UX"
+ifeq ($(OS),HP-UX)
+ DISABLE_AUTO_DEPENDENCIES=1
+endif
+
+ifdef SHARED_LIBRARY
+PIC_FLAG = "(PIC)"
+MAYBE_PIC_Compile.CXX = $(LTCompile.CXX)
+MAYBE_PIC_Compile.C = $(LTCompile.C)
+else
+MAYBE_PIC_Compile.CXX = $(Compile.CXX)
+MAYBE_PIC_Compile.C = $(Compile.C)
+endif
+
# Provide rule sets for when dependency generation is enabled
ifndef DISABLE_AUTO_DEPENDENCIES
#---------------------------------------------------------
# Create .lo files in the ObjDir directory from the .cpp and .c files...
#---------------------------------------------------------
-ifdef SHARED_LIBRARY
$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)"
- $(Verb) if $(LTCompile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACXXd $< -o $@ ;\
- then $(MV) -f "$(ObjDir)/$*.LACXXd" "$(ObjDir)/$*.d"; \
- else $(RM) -f "$(ObjDir)/$*.LACXXd"; exit 1; fi
+ $(Echo) "Compiling $*.cpp for $(BuildMode) build " $(PIC_FLAG)
+ $(Verb) if $(MAYBE_PIC_Compile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACXXd $< -o $@ ;\
+ then $(MV) -f "$(ObjDir)/$*.LACXXd" "$(ObjDir)/$*.d"; \
+ else $(RM) -f "$(ObjDir)/$*.LACXXd"; exit 1; fi
$(ObjDir)/%.lo $(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cc for $(BuildMode) build (PIC)"
- $(Verb) if $(LTCompile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACXXd $< -o $@ ;\
+ $(Echo) "Compiling $*.cc for $(BuildMode) build" $(PIC_FLAG)
+ $(Verb) if $(MAYBE_PIC_Compile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACXXd $< -o $@ ;\
then $(MV) -f "$(ObjDir)/$*.LACXXd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.LACXXd"; exit 1; fi
$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.c for $(BuildMode) build (PIC)"
- $(Verb) if $(LTCompile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACd $< -o $@ ; \
+ $(Echo) "Compiling $*.c for $(BuildMode) build" $(PIC_FLAG)
+ $(Verb) if $(MAYBE_PIC_Compile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACd $< -o $@ ; \
then $(MV) -f "$(ObjDir)/$*.LACd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.LACd"; exit 1; fi
-#---------------------------------------------------------
-# Create .o files in the ObjDir directory from the .cpp and .c files...
-#---------------------------------------------------------
-else
-
-$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build"
- $(Verb) if $(Compile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.CXXd $< -o $@ ; \
- then $(MV) -f "$(ObjDir)/$*.CXXd" "$(ObjDir)/$*.d"; \
- else $(RM) -f "$(ObjDir)/$*.CXXd"; exit 1; fi
-
-$(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cc for $(BuildMode) build"
- $(Verb) if $(Compile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.CXXd $< -o $@ ; \
- then $(MV) -f "$(ObjDir)/$*.CXXd" "$(ObjDir)/$*.d"; \
- else $(RM) -f "$(ObjDir)/$*.CXXd"; exit 1; fi
-
-$(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.c for $(BuildMode) build"
- $(Verb) if $(Compile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.Cd $< -o $@ ; \
- then $(MV) -f "$(ObjDir)/$*.Cd" "$(ObjDir)/$*.d"; \
- else $(RM) -f "$(ObjDir)/$*.Cd"; exit 1; fi
-
-endif
-
-## Rules for building preprocessed (.i/.ii) outputs.
-$(BuildMode)/%.ii: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build to .ii file"
- $(Verb) $(Preprocess.CXX) $< -o $@
-
-$(BuildMode)/%.ii: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cc for $(BuildMode) build to .ii file"
- $(Verb) $(Preprocess.CXX) $< -o $@
-
- $(BuildMode)/%.i: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.c for $(BuildMode) build to .i file"
- $(Verb) $(Preprocess.C) $< -o $@
-
-
#---------------------------------------------------------
# Create .bc files in the ObjDir directory from .cpp .cc and .c files...
#---------------------------------------------------------
-$(ObjDir)/%.ll: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
+$(ObjDir)/%.ll: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGXX)
$(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)"
$(Verb) if $(BCCompile.CXX) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCXXd" \
$< -o $@ -S -emit-llvm ; \
then $(MV) -f "$(ObjDir)/$*.BCCXXd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.BCCXXd"; exit 1; fi
+ $(call UPGRADE_MSG,$@)
+ $(call UPGRADE_LL,$@)
-$(ObjDir)/%.ll: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+$(ObjDir)/%.ll: %.cc $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGXX)
$(Echo) "Compiling $*.cc for $(BuildMode) build (bytecode)"
$(Verb) if $(BCCompile.CXX) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCXXd" \
$< -o $@ -S -emit-llvm ; \
then $(MV) -f "$(ObjDir)/$*.BCCXXd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.BCCXXd"; exit 1; fi
+ $(call UPGRADE_MSG,$@)
+ $(call UPGRADE_LL,$@)
-$(ObjDir)/%.ll: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
+$(ObjDir)/%.ll: %.c $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGCC)
$(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)"
$(Verb) if $(BCCompile.C) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCd" \
$< -o $@ -S -emit-llvm ; \
then $(MV) -f "$(ObjDir)/$*.BCCd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.BCCd"; exit 1; fi
+ $(call UPGRADE_MSG,$@)
+ $(call UPGRADE_LL,$@)
# Provide alternate rule sets if dependencies are disabled
else
-ifdef SHARED_LIBRARY
-
$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)"
- $(LTCompile.CXX) $< -o $@
+ $(Echo) "Compiling $*.cpp for $(BuildMode) build" $(PIC_FLAG)
+ $(MAYBE_PIC_Compile.CXX) $< -o $@
$(ObjDir)/%.lo $(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cc for $(BuildMode) build (PIC)"
- $(LTCompile.CXX) $< -o $@
+ $(Echo) "Compiling $*.cc for $(BuildMode) build" $(PIC_FLAG)
+ $(MAYBE_PIC_Compile.CXX) $< -o $@
$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.c for $(BuildMode) build (PIC)"
- $(LTCompile.C) $< -o $@
+ $(Echo) "Compiling $*.c for $(BuildMode) build" $(PIC_FLAG)
+ $(MAYBE_PIC_Compile.C) $< -o $@
-else
-
-$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build"
- $(Compile.CXX) $< -o $@
-
-$(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cc for $(BuildMode) build"
- $(Compile.CXX) $< -o $@
-
-$(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.c for $(BuildMode) build"
- $(Compile.C) $< -o $@
-endif
-
-$(ObjDir)/%.ll: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
+$(ObjDir)/%.ll: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGXX)
$(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)"
$(BCCompile.CXX) $< -o $@ -S -emit-llvm
+ $(call UPGRADE_MSG,$@)
+ $(call UPGRADE_LL,$@)
-$(ObjDir)/%.ll: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+$(ObjDir)/%.ll: %.cc $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGXX)
$(Echo) "Compiling $*.cc for $(BuildMode) build (bytecode)"
$(BCCompile.CXX) $< -o $@ -S -emit-llvm
+ $(call UPGRADE_MSG,$@)
+ $(call UPGRADE_LL,$@)
-$(ObjDir)/%.ll: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
+$(ObjDir)/%.ll: %.c $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGCC)
$(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)"
$(BCCompile.C) $< -o $@ -S -emit-llvm
+ $(call UPGRADE_MSG,@)
+ $(call UPGRADE_LL,@)
endif
+
+## Rules for building preprocessed (.i/.ii) outputs.
+$(BuildMode)/%.ii: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cpp for $(BuildMode) build to .ii file"
+ $(Verb) $(Preprocess.CXX) $< -o $@
+
+$(BuildMode)/%.ii: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build to .ii file"
+ $(Verb) $(Preprocess.CXX) $< -o $@
+
+$(BuildMode)/%.i: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.c for $(BuildMode) build to .i file"
+ $(Verb) $(Preprocess.C) $< -o $@
+
+
+$(ObjDir)/%.s: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cpp to asm for $(BuildMode) build" $(PIC_FLAG)
+ $(MAYBE_PIC_Compile.CXX) $< -o $@ -S
+
+$(ObjDir)/%.s: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc to asm for $(BuildMode) build" $(PIC_FLAG)
+ $(MAYBE_PIC_Compile.CXX) $< -o $@ -S
+
+$(ObjDir)/%.s: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.c to asm for $(BuildMode) build" $(PIC_FLAG)
+ $(MAYBE_PIC_Compile.C) $< -o $@ -S
+
+
# make the C and C++ compilers strip debug info out of bytecode libraries.
ifdef DEBUG_RUNTIME
-$(ObjectsBC): $(ObjDir)/%.bc: $(ObjDir)/%.ll $(GCCAS)
+$(ObjectsBC): $(ObjDir)/%.bc: $(ObjDir)/%.ll $(LLVMAS) $(LOPT)
$(Echo) "Compiling $*.ll to $*.bc for $(BuildMode) build (bytecode)"
- @$(GCCAS) $< -o $@
+ $(Verb) $(LLVMAS) $< -o - | $(LOPT) -std-compile-opts -o $@ -f
else
-$(ObjectsBC): $(ObjDir)/%.bc: $(ObjDir)/%.ll $(GCCAS)
+$(ObjectsBC): $(ObjDir)/%.bc: $(ObjDir)/%.ll $(LLVMAS) $(LOPT)
$(Echo) "Compiling $*.ll to $*.bc for $(BuildMode) build (bytecode)"
- @$(GCCAS) -strip-debug $< -o $@
+ $(Verb) $(LLVMAS) $< -o - | \
+ $(LOPT) -std-compile-opts -strip-debug -o $@ -f
endif
TDFiles := $(strip $(wildcard $(PROJ_SRC_DIR)/*.td) \
$(LLVM_SRC_ROOT)/lib/Target/Target.td \
- $(LLVM_SRC_ROOT)/lib/Target/TargetSelectionDAG.td)
+ $(LLVM_SRC_ROOT)/lib/Target/TargetCallingConv.td \
+ $(LLVM_SRC_ROOT)/lib/Target/TargetSelectionDAG.td \
+ $(LLVM_SRC_ROOT)/include/llvm/CodeGen/ValueTypes.td) \
+ $(wildcard $(LLVM_SRC_ROOT)/include/llvm/Intrinsics*.td)
INCFiles := $(filter %.inc,$(BUILT_SOURCES))
INCTMPFiles := $(INCFiles:%=$(ObjDir)/%.tmp)
.PRECIOUS: $(INCTMPFiles) $(INCFiles)
$(Echo) "Building $(<F) subtarget information with tblgen"
$(Verb) $(TableGen) -gen-subtarget -o $@ $<
+$(TARGET:%=$(ObjDir)/%GenCallingConv.inc.tmp): \
+$(ObjDir)/%GenCallingConv.inc.tmp : %.td $(ObjDir)/.dir
+ $(Echo) "Building $(<F) calling convention information with tblgen"
+ $(Verb) $(TableGen) -gen-callingconv -o $@ $<
+
clean-local::
-$(Verb) $(RM) -f $(INCFiles)
%.c: %.l
%.cpp: %.l
+all:: $(LexFiles:%.l=$(PROJ_SRC_DIR)/%.cpp.cvs)
+
# Note the extra sed filtering here, used to cut down on the warnings emited
# by GCC. The last line is a gross hack to work around flex aparently not
# being able to resize the buffer on a large token input. Currently, for
$(SED) 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \
$(SED) 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' \
> $(PROJ_SRC_DIR)/$*.cpp
- $(Echo) "*** DON'T FORGET TO CHECK IN $*.cpp (generated file)"
-
-LexObjs := $(patsubst %.l,$(ObjDir)/%.o,$(LexFiles))
-$(LexObjs): $(ObjDir)/%.o : $(PROJ_SRC_DIR)/%.cpp
+
+# IFF the .l file has changed since it was last checked into CVS, copy the .l
+# file to .l.cvs and the generated .cpp file to .cpp.cvs. We use this mechanism
+# so that people without flex can build LLVM by copying the .cvs files to the
+# source location and building them.
+$(LexFiles:%.l=$(PROJ_SRC_DIR)/%.cpp.cvs): \
+$(PROJ_SRC_DIR)/%.cpp.cvs: $(PROJ_SRC_DIR)/%.cpp
+ $(Verb) $(CMP) -s $(PROJ_SRC_DIR)/$*.l $(PROJ_SRC_DIR)/$*.l.cvs || \
+ ($(CP) $< $@; $(CP) $(PROJ_SRC_DIR)/$*.l $(PROJ_SRC_DIR)/$*.l.cvs)
+
+$(LexFiles:%.l=$(ObjDir)/%.o) : \
+$(ObjDir)/%.o : $(PROJ_SRC_DIR)/%.cpp
clean-local::
-$(Verb) $(RM) -f $(LexOutput)
.PRECIOUS: $(YaccOutput)
+all:: $(YaccFiles:%.y=$(PROJ_SRC_DIR)/%.cpp.cvs)
+
# Cancel built-in rules for yacc
%.c: %.y
%.cpp: %.y
%.h: %.y
# Rule for building the bison based parsers...
+ifneq ($(BISON),)
$(PROJ_SRC_DIR)/%.cpp $(PROJ_SRC_DIR)/%.h : $(PROJ_SRC_DIR)/%.y
$(Echo) "Bisoning $*.y"
$(Verb) $(BISON) -v -d -p $(<F:%Parser.y=%) -o $*.tab.c $<
$(Verb) $(MV) -f $*.tab.c $(PROJ_SRC_DIR)/$*.cpp
$(Verb) $(MV) -f $*.tab.h $(PROJ_SRC_DIR)/$*.h
- $(Echo) "*** DON'T FORGET TO CHECK IN $*.cpp and $*.h (generated files)"
-YaccObjs := $(patsubst %.y,$(ObjDir)/%.o,$(YaccFiles))
-$(YaccObjs): $(ObjDir)/%.o : $(PROJ_SRC_DIR)/%.cpp
+# IFF the .y file has changed since it was last checked into CVS, copy the .y
+# file to .y.cvs and the generated .cpp/.h file to .cpp.cvs/.h.cvs. We use this
+# mechanism so that people without flex can build LLVM by copying the .cvs files
+# to the source location and building them.
+$(YaccFiles:%.y=$(PROJ_SRC_DIR)/%.cpp.cvs): \
+$(PROJ_SRC_DIR)/%.cpp.cvs: $(PROJ_SRC_DIR)/%.cpp
+ $(Verb) $(CMP) -s $(PROJ_SRC_DIR)/$*.y $(PROJ_SRC_DIR)/$*.y.cvs || \
+ ($(CP) $< $@; \
+ $(CP) $(PROJ_SRC_DIR)/$*.y $(PROJ_SRC_DIR)/$*.y.cvs; \
+ $(CP) $(PROJ_SRC_DIR)/$*.h $(PROJ_SRC_DIR)/$*.h.cvs)
+
+else
+$(PROJ_SRC_DIR)/%.cpp : $(PROJ_SRC_DIR)/%.cpp.cvs
+ $(Echo) "Bison of $*.y SKIPPED, bison not found -- copying .cpp.cvs"
+ $(Verb)$(CP) $(PROJ_SRC_DIR)/$*.cpp.cvs $(PROJ_SRC_DIR)/$*.cpp
+
+$(PROJ_SRC_DIR)/%.h : $(PROJ_SRC_DIR)/%.h.cvs
+ $(Echo) "Bison of $*.y SKIPPED, bison not found -- copying .h.cvs"
+ $(Verb)$(CP) $(PROJ_SRC_DIR)/$*.h.cvs $(PROJ_SRC_DIR)/$*.h
+endif
+
+
+$(YaccFiles:%.y=$(ObjDir)/%.o): $(ObjDir)/%.o : $(PROJ_SRC_DIR)/%.cpp
-YaccOutput := $(addprefix $(patsubst %.y,%,$(YaccFiles)),.output)
+YaccOutput := $(YaccFiles:%.y=%.output)
clean-local::
-$(Verb) $(RM) -f $(YaccOutput)
ifndef DISABLE_AUTO_DEPENDENCIES
# If its not one of the cleaning targets
-ifneq ($strip($(filter-out clean clean-local dist-clean,$(MAKECMDGOALS))),)
+ifneq ($(strip $(filter-out clean clean-local dist-clean,$(MAKECMDGOALS)))),)
# Get the list of dependency files
DependFiles := $(basename $(filter %.cpp %.c %.cc, $(Sources)))
-DependFiles := $(patsubst %,$(PROJ_OBJ_DIR)/$(BuildMode)/%.d,$(DependFiles))
+DependFiles := $(DependFiles:%=$(PROJ_OBJ_DIR)/$(BuildMode)/%.d)
-include /dev/null $(DependFiles)
$(MAKE) check && \
$(MAKE) install && \
$(MAKE) uninstall && \
- $(MAKE) dist && \
- $(MAKE) clean && \
$(MAKE) dist-clean && \
$(EchoCmd) ===== $(DistTarGZip) Ready For Distribution =====
$(EchoCmd) Removing old $(DistDir) ; \
$(RM) -rf $(DistDir); \
$(EchoCmd) Making 'all' to verify build ; \
- $(MAKE) all ; \
+ $(MAKE) ENABLE_OPTIMIZED=1 all ; \
fi
$(Echo) Building Distribution Directory $(DistDir)
$(Verb) $(MKDIR) $(DistDir)
if test "$$subdir" \!= "." ; then \
new_distdir="$(DistDir)/$$subdir" ; \
test -d "$$new_distdir" || $(MKDIR) "$$new_distdir" || exit 1; \
- ( cd $$subdir && $(MAKE) DistDir="$$new_distdir" distdir ) || \
- exit 1; \
+ ( cd $$subdir && $(MAKE) ENABLE_OPTIMIZED=1 \
+ DistDir="$$new_distdir" distdir ) || exit 1; \
fi; \
done
$(Verb) if test "$(DistDir)" = "$(TopDistDir)" ; then \
#------------------------------------------------------------------------
# Install support for the project's include files:
#------------------------------------------------------------------------
+ifdef NO_INSTALL
+install-local::
+ $(Echo) Install circumvented with NO_INSTALL
+uninstall-local::
+ $(Echo) Uninstall circumvented with NO_INSTALL
+else
install-local::
$(Echo) Installing include files
$(Verb) $(MKDIR) $(PROJ_includedir)
$(Verb) if test -d "$(PROJ_SRC_ROOT)/include" ; then \
cd $(PROJ_SRC_ROOT)/include && \
for hdr in `find . -type f '!' '(' -name '*~' -o -name '.cvsignore' \
- -o -name '.#*' -o -name '*.in' ')' -print | grep -v CVS ` ; do \
+ -o -name '.#*' -o -name '*.in' ')' -print | grep -v CVS | \
+ grep -v .svn` ; do \
instdir=`dirname "$(PROJ_includedir)/$$hdr"` ; \
if test \! -d "$$instdir" ; then \
$(EchoCmd) Making install directory $$instdir ; \
$(RM) -f `find . -path '*/Internal' -prune -o '(' -type f -name '*.in' \
-print ')' | sed 's#\.in$$##;s#^#$(PROJ_includedir)/#'` ; \
fi
-
endif
+endif
+
+check-line-length:
+ @egrep -n '.{81}' $(Sources)
+check-for-tabs:
+ @egrep -n ' ' $(Sources)
+check-footprint:
+ @ls -l $(LibDir) | awk '\
+ BEGIN { sum = 0; } \
+ { sum += $$5; } \
+ END { printf("Libraries: %6.3f MBytes\n", sum/(1024.0*1024.0)); }'
+ @ls -l $(ToolDir) | awk '\
+ BEGIN { sum = 0; } \
+ { sum += $$5; } \
+ END { printf("Programs: %6.3f MBytes\n", sum/(1024.0*1024.0)); }'
#------------------------------------------------------------------------
# Print out the directories used for building
#------------------------------------------------------------------------
$(Echo) "LexFiles : " '$(LexFiles)'
$(Echo) "Module : " '$(Module)'
$(Echo) "FilesToConfig: " '$(FilesToConfigPATH)'
+ $(Echo) "SubDirs : " '$(SubDirs)'
+ $(Echo) "ProjLibsPaths: " '$(ProjLibsPaths)'
+ $(Echo) "ProjLibsOptions: " '$(ProjLibsOptions)'
projects / oota-llvm.git / blobdiff