; RUN: llc -march=amdgcn -mcpu=tahiti -verify-machineinstrs < %s | FileCheck -check-prefix=GCN -check-prefix=SI %s ; RUN: llc -march=amdgcn -mcpu=bonaire -verify-machineinstrs < %s | FileCheck -check-prefix=GCN -check-prefix=CI %s declare i32 @llvm.r600.read.tidig.x() #0 declare i32 @llvm.r600.read.tidig.y() #0 ; In this test both the pointer and the offset operands to the ; BUFFER_LOAD instructions end up being stored in vgprs. This ; requires us to add the pointer and offset together, store the ; result in the offset operand (vaddr), and then store 0 in an ; sgpr register pair and use that for the pointer operand ; (low 64-bits of srsrc). ; GCN-LABEL: {{^}}mubuf: ; Make sure we aren't using VGPRs for the source operand of s_mov_b64 ; GCN-NOT: s_mov_b64 s[{{[0-9]+:[0-9]+}}], v ; Make sure we aren't using VGPR's for the srsrc operand of BUFFER_LOAD_* ; instructions ; GCN: buffer_load_ubyte v{{[0-9]+}}, v[{{[0-9]+:[0-9]+}}], s[{{[0-9]+:[0-9]+}}], 0 addr64 ; GCN: buffer_load_ubyte v{{[0-9]+}}, v[{{[0-9]+:[0-9]+}}], s[{{[0-9]+:[0-9]+}}], 0 addr64 define void @mubuf(i32 addrspace(1)* %out, i8 addrspace(1)* %in) #1 { entry: %tmp = call i32 @llvm.r600.read.tidig.x() %tmp1 = call i32 @llvm.r600.read.tidig.y() %tmp2 = sext i32 %tmp to i64 %tmp3 = sext i32 %tmp1 to i64 br label %loop loop: ; preds = %loop, %entry %tmp4 = phi i64 [ 0, %entry ], [ %tmp5, %loop ] %tmp5 = add i64 %tmp2, %tmp4 %tmp6 = getelementptr i8, i8 addrspace(1)* %in, i64 %tmp5 %tmp7 = load i8, i8 addrspace(1)* %tmp6, align 1 %tmp8 = or i64 %tmp5, 1 %tmp9 = getelementptr i8, i8 addrspace(1)* %in, i64 %tmp8 %tmp10 = load i8, i8 addrspace(1)* %tmp9, align 1 %tmp11 = add i8 %tmp7, %tmp10 %tmp12 = sext i8 %tmp11 to i32 store i32 %tmp12, i32 addrspace(1)* %out %tmp13 = icmp slt i64 %tmp5, 10 br i1 %tmp13, label %loop, label %done done: ; preds = %loop ret void } ; Test moving an SMRD instruction to the VALU ; GCN-LABEL: {{^}}smrd_valu: ; GCN: buffer_load_dword [[OUT:v[0-9]+]] ; GCN: buffer_store_dword [[OUT]] define void @smrd_valu(i32 addrspace(2)* addrspace(1)* %in, i32 %a, i32 %b, i32 addrspace(1)* %out) #1 { entry: %tmp = icmp ne i32 %a, 0 br i1 %tmp, label %if, label %else if: ; preds = %entry %tmp1 = load i32 addrspace(2)*, i32 addrspace(2)* addrspace(1)* %in br label %endif else: ; preds = %entry %tmp2 = getelementptr i32 addrspace(2)*, i32 addrspace(2)* addrspace(1)* %in %tmp3 = load i32 addrspace(2)*, i32 addrspace(2)* addrspace(1)* %tmp2 br label %endif endif: ; preds = %else, %if %tmp4 = phi i32 addrspace(2)* [ %tmp1, %if ], [ %tmp3, %else ] %tmp5 = getelementptr i32, i32 addrspace(2)* %tmp4, i32 3000 %tmp6 = load i32, i32 addrspace(2)* %tmp5 store i32 %tmp6, i32 addrspace(1)* %out ret void } ; Test moving an SMRD with an immediate offset to the VALU ; GCN-LABEL: {{^}}smrd_valu2: ; GCN: buffer_load_dword v{{[0-9]+}}, v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:16{{$}} define void @smrd_valu2(i32 addrspace(1)* %out, [8 x i32] addrspace(2)* %in) #1 { entry: %tmp = call i32 @llvm.r600.read.tidig.x() #0 %tmp1 = add i32 %tmp, 4 %tmp2 = getelementptr [8 x i32], [8 x i32] addrspace(2)* %in, i32 %tmp, i32 4 %tmp3 = load i32, i32 addrspace(2)* %tmp2 store i32 %tmp3, i32 addrspace(1)* %out ret void } ; Use a big offset that will use the SMRD literal offset on CI ; GCN-LABEL: {{^}}smrd_valu_ci_offset: ; GCN: s_movk_i32 s[[OFFSET:[0-9]+]], 0x4e20{{$}} ; GCN: buffer_load_dword v{{[0-9]+}}, v{{\[[0-9]+:[0-9]+\]}}, s{{\[}}[[OFFSET]]:{{[0-9]+}}], 0 addr64{{$}} ; GCN: v_add_i32_e32 ; GCN: buffer_store_dword define void @smrd_valu_ci_offset(i32 addrspace(1)* %out, i32 addrspace(2)* %in, i32 %c) #1 { entry: %tmp = call i32 @llvm.r600.read.tidig.x() #0 %tmp2 = getelementptr i32, i32 addrspace(2)* %in, i32 %tmp %tmp3 = getelementptr i32, i32 addrspace(2)* %tmp2, i32 5000 %tmp4 = load i32, i32 addrspace(2)* %tmp3 %tmp5 = add i32 %tmp4, %c store i32 %tmp5, i32 addrspace(1)* %out ret void } ; GCN-LABEL: {{^}}smrd_valu_ci_offset_x2: ; GCN: s_mov_b32 s[[OFFSET:[0-9]+]], 0x9c40{{$}} ; GCN: buffer_load_dwordx2 v{{\[[0-9]+:[0-9]+\]}}, v{{\[[0-9]+:[0-9]+\]}}, s{{\[}}[[OFFSET]]:{{[0-9]+}}], 0 addr64{{$}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: buffer_store_dwordx2 define void @smrd_valu_ci_offset_x2(i64 addrspace(1)* %out, i64 addrspace(2)* %in, i64 %c) #1 { entry: %tmp = call i32 @llvm.r600.read.tidig.x() #0 %tmp2 = getelementptr i64, i64 addrspace(2)* %in, i32 %tmp %tmp3 = getelementptr i64, i64 addrspace(2)* %tmp2, i32 5000 %tmp4 = load i64, i64 addrspace(2)* %tmp3 %tmp5 = or i64 %tmp4, %c store i64 %tmp5, i64 addrspace(1)* %out ret void } ; GCN-LABEL: {{^}}smrd_valu_ci_offset_x4: ; GCN: s_movk_i32 s[[OFFSET:[0-9]+]], 0x4d20{{$}} ; GCN: buffer_load_dwordx4 v{{\[[0-9]+:[0-9]+\]}}, v{{\[[0-9]+:[0-9]+\]}}, s{{\[}}[[OFFSET]]:{{[0-9]+}}], 0 addr64{{$}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: buffer_store_dwordx4 define void @smrd_valu_ci_offset_x4(<4 x i32> addrspace(1)* %out, <4 x i32> addrspace(2)* %in, <4 x i32> %c) #1 { entry: %tmp = call i32 @llvm.r600.read.tidig.x() #0 %tmp2 = getelementptr <4 x i32>, <4 x i32> addrspace(2)* %in, i32 %tmp %tmp3 = getelementptr <4 x i32>, <4 x i32> addrspace(2)* %tmp2, i32 1234 %tmp4 = load <4 x i32>, <4 x i32> addrspace(2)* %tmp3 %tmp5 = or <4 x i32> %tmp4, %c store <4 x i32> %tmp5, <4 x i32> addrspace(1)* %out ret void } ; Original scalar load uses SGPR offset on SI and 32-bit literal on ; CI. ; GCN-LABEL: {{^}}smrd_valu_ci_offset_x8: ; GCN: s_mov_b32 s[[OFFSET0:[0-9]+]], 0x9a40{{$}} ; GCN: buffer_load_dwordx4 v{{\[[0-9]+:[0-9]+\]}}, v{{\[[0-9]+:[0-9]+\]}}, s{{\[}}[[OFFSET0]]:{{[0-9]+}}], 0 addr64{{$}} ; SI: s_add_i32 s[[OFFSET1:[0-9]+]], s[[OFFSET0]], 16 ; SI: buffer_load_dwordx4 v{{\[[0-9]+:[0-9]+\]}}, v{{\[[0-9]+:[0-9]+\]}}, s{{\[}}[[OFFSET1]]:{{[0-9]+}}], 0 addr64{{$}} ; CI: s_mov_b32 s[[OFFSET1:[0-9]+]], 0x9a50{{$}} ; CI: buffer_load_dwordx4 v{{\[[0-9]+:[0-9]+\]}}, v{{\[[0-9]+:[0-9]+\]}}, s{{\[}}[[OFFSET1]]:{{[0-9]+}}], 0 addr64{{$}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: buffer_store_dword ; GCN: buffer_store_dword ; GCN: buffer_store_dword ; GCN: buffer_store_dword ; GCN: buffer_store_dword ; GCN: buffer_store_dword ; GCN: buffer_store_dword ; GCN: buffer_store_dword define void @smrd_valu_ci_offset_x8(<8 x i32> addrspace(1)* %out, <8 x i32> addrspace(2)* %in, <8 x i32> %c) #1 { entry: %tmp = call i32 @llvm.r600.read.tidig.x() #0 %tmp2 = getelementptr <8 x i32>, <8 x i32> addrspace(2)* %in, i32 %tmp %tmp3 = getelementptr <8 x i32>, <8 x i32> addrspace(2)* %tmp2, i32 1234 %tmp4 = load <8 x i32>, <8 x i32> addrspace(2)* %tmp3 %tmp5 = or <8 x i32> %tmp4, %c store <8 x i32> %tmp5, <8 x i32> addrspace(1)* %out ret void } ; FIXME: should use immediate offset instead of using s_add_i32 for adding to constant. ; GCN-LABEL: {{^}}smrd_valu_ci_offset_x16: ; GCN: s_mov_b32 s[[OFFSET0:[0-9]+]], 0x13480{{$}} ; SI-DAG: s_add_i32 s[[OFFSET1:[0-9]+]], s[[OFFSET0]], 16 ; GCN-DAG: buffer_load_dwordx4 v{{\[[0-9]+:[0-9]+\]}}, v{{\[[0-9]+:[0-9]+\]}}, s{{\[}}[[OFFSET0]]:{{[0-9]+}}], 0 addr64{{$}} ; CI-DAG: s_mov_b32 s[[OFFSET1:[0-9]+]], 0x13490{{$}} ; GCN-DAG: buffer_load_dwordx4 v{{\[[0-9]+:[0-9]+\]}}, v{{\[[0-9]+:[0-9]+\]}}, s{{\[}}[[OFFSET1]]:{{[0-9]+}}], 0 addr64{{$}} ; SI-DAG: s_add_i32 s[[OFFSET2:[0-9]+]], s[[OFFSET0]], 32 ; CI-DAG: s_mov_b32 s[[OFFSET2:[0-9]+]], 0x134a0 ; GCN-DAG: buffer_load_dwordx4 v{{\[[0-9]+:[0-9]+\]}}, v{{\[[0-9]+:[0-9]+\]}}, s{{\[}}[[OFFSET2]]:{{[0-9]+}}], 0 addr64{{$}} ; GCN-DAG: s_add_i32 s[[OFFSET3:[0-9]+]], s[[OFFSET2]], 16 ; GCN-DAG: buffer_load_dwordx4 v{{\[[0-9]+:[0-9]+\]}}, v{{\[[0-9]+:[0-9]+\]}}, s{{\[}}[[OFFSET3]]:{{[0-9]+}}], 0 addr64{{$}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: v_or_b32_e32 {{v[0-9]+}}, {{s[0-9]+}}, {{v[0-9]+}} ; GCN: buffer_store_dword ; GCN: buffer_store_dword ; GCN: buffer_store_dword ; GCN: buffer_store_dword ; GCN: buffer_store_dword ; GCN: buffer_store_dword ; GCN: buffer_store_dword ; GCN: buffer_store_dword define void @smrd_valu_ci_offset_x16(<16 x i32> addrspace(1)* %out, <16 x i32> addrspace(2)* %in, <16 x i32> %c) #1 { entry: %tmp = call i32 @llvm.r600.read.tidig.x() #0 %tmp2 = getelementptr <16 x i32>, <16 x i32> addrspace(2)* %in, i32 %tmp %tmp3 = getelementptr <16 x i32>, <16 x i32> addrspace(2)* %tmp2, i32 1234 %tmp4 = load <16 x i32>, <16 x i32> addrspace(2)* %tmp3 %tmp5 = or <16 x i32> %tmp4, %c store <16 x i32> %tmp5, <16 x i32> addrspace(1)* %out ret void } ; GCN-LABEL: {{^}}smrd_valu2_salu_user: ; GCN: buffer_load_dword [[MOVED:v[0-9]+]], v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:16{{$}} ; GCN: v_add_i32_e32 [[ADD:v[0-9]+]], vcc, s{{[0-9]+}}, [[MOVED]] ; GCN: buffer_store_dword [[ADD]] define void @smrd_valu2_salu_user(i32 addrspace(1)* %out, [8 x i32] addrspace(2)* %in, i32 %a) #1 { entry: %tmp = call i32 @llvm.r600.read.tidig.x() #0 %tmp1 = add i32 %tmp, 4 %tmp2 = getelementptr [8 x i32], [8 x i32] addrspace(2)* %in, i32 %tmp, i32 4 %tmp3 = load i32, i32 addrspace(2)* %tmp2 %tmp4 = add i32 %tmp3, %a store i32 %tmp4, i32 addrspace(1)* %out ret void } ; GCN-LABEL: {{^}}smrd_valu2_max_smrd_offset: ; GCN: buffer_load_dword v{{[0-9]+}}, v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:1020{{$}} define void @smrd_valu2_max_smrd_offset(i32 addrspace(1)* %out, [1024 x i32] addrspace(2)* %in) #1 { entry: %tmp = call i32 @llvm.r600.read.tidig.x() #0 %tmp1 = add i32 %tmp, 4 %tmp2 = getelementptr [1024 x i32], [1024 x i32] addrspace(2)* %in, i32 %tmp, i32 255 %tmp3 = load i32, i32 addrspace(2)* %tmp2 store i32 %tmp3, i32 addrspace(1)* %out ret void } ; Offset is too big to fit in SMRD 8-bit offset, but small enough to ; fit in MUBUF offset. ; FIXME: We should be using the offset but we don't ; GCN-LABEL: {{^}}smrd_valu2_mubuf_offset: ; SI: s_movk_i32 s[[OFFSET:[0-9]+]], 0x400{{$}} ; SI: buffer_load_dword v{{[0-9]+}}, v{{\[[0-9]+:[0-9]+\]}}, s{{\[}}[[OFFSET]]:{{[0-9]+\]}}, 0 addr64{{$}} ; CI: buffer_load_dword v{{[0-9]+}}, v{{\[[0-9]+:[0-9]+\]}}, s{{\[[0-9]+:[0-9]+\]}}, 0 addr64 offset:1024{{$}} define void @smrd_valu2_mubuf_offset(i32 addrspace(1)* %out, [1024 x i32] addrspace(2)* %in) #1 { entry: %tmp = call i32 @llvm.r600.read.tidig.x() #0 %tmp1 = add i32 %tmp, 4 %tmp2 = getelementptr [1024 x i32], [1024 x i32] addrspace(2)* %in, i32 %tmp, i32 256 %tmp3 = load i32, i32 addrspace(2)* %tmp2 store i32 %tmp3, i32 addrspace(1)* %out ret void } ; GCN-LABEL: {{^}}s_load_imm_v8i32: ; GCN: buffer_load_dwordx4 ; GCN: buffer_load_dwordx4 define void @s_load_imm_v8i32(<8 x i32> addrspace(1)* %out, i32 addrspace(2)* nocapture readonly %in) #1 { entry: %tmp0 = tail call i32 @llvm.r600.read.tidig.x() %tmp1 = getelementptr inbounds i32, i32 addrspace(2)* %in, i32 %tmp0 %tmp2 = bitcast i32 addrspace(2)* %tmp1 to <8 x i32> addrspace(2)* %tmp3 = load <8 x i32>, <8 x i32> addrspace(2)* %tmp2, align 4 store <8 x i32> %tmp3, <8 x i32> addrspace(1)* %out, align 32 ret void } ; GCN-LABEL: {{^}}s_load_imm_v8i32_salu_user: ; GCN: buffer_load_dwordx4 ; GCN: buffer_load_dwordx4 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: buffer_store_dword define void @s_load_imm_v8i32_salu_user(i32 addrspace(1)* %out, i32 addrspace(2)* nocapture readonly %in) #1 { entry: %tmp0 = tail call i32 @llvm.r600.read.tidig.x() %tmp1 = getelementptr inbounds i32, i32 addrspace(2)* %in, i32 %tmp0 %tmp2 = bitcast i32 addrspace(2)* %tmp1 to <8 x i32> addrspace(2)* %tmp3 = load <8 x i32>, <8 x i32> addrspace(2)* %tmp2, align 4 %elt0 = extractelement <8 x i32> %tmp3, i32 0 %elt1 = extractelement <8 x i32> %tmp3, i32 1 %elt2 = extractelement <8 x i32> %tmp3, i32 2 %elt3 = extractelement <8 x i32> %tmp3, i32 3 %elt4 = extractelement <8 x i32> %tmp3, i32 4 %elt5 = extractelement <8 x i32> %tmp3, i32 5 %elt6 = extractelement <8 x i32> %tmp3, i32 6 %elt7 = extractelement <8 x i32> %tmp3, i32 7 %add0 = add i32 %elt0, %elt1 %add1 = add i32 %add0, %elt2 %add2 = add i32 %add1, %elt3 %add3 = add i32 %add2, %elt4 %add4 = add i32 %add3, %elt5 %add5 = add i32 %add4, %elt6 %add6 = add i32 %add5, %elt7 store i32 %add6, i32 addrspace(1)* %out ret void } ; GCN-LABEL: {{^}}s_load_imm_v16i32: ; GCN: buffer_load_dwordx4 ; GCN: buffer_load_dwordx4 ; GCN: buffer_load_dwordx4 ; GCN: buffer_load_dwordx4 define void @s_load_imm_v16i32(<16 x i32> addrspace(1)* %out, i32 addrspace(2)* nocapture readonly %in) #1 { entry: %tmp0 = tail call i32 @llvm.r600.read.tidig.x() #1 %tmp1 = getelementptr inbounds i32, i32 addrspace(2)* %in, i32 %tmp0 %tmp2 = bitcast i32 addrspace(2)* %tmp1 to <16 x i32> addrspace(2)* %tmp3 = load <16 x i32>, <16 x i32> addrspace(2)* %tmp2, align 4 store <16 x i32> %tmp3, <16 x i32> addrspace(1)* %out, align 32 ret void } ; GCN-LABEL: {{^}}s_load_imm_v16i32_salu_user: ; GCN: buffer_load_dwordx4 ; GCN: buffer_load_dwordx4 ; GCN: buffer_load_dwordx4 ; GCN: buffer_load_dwordx4 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: v_add_i32_e32 ; GCN: buffer_store_dword define void @s_load_imm_v16i32_salu_user(i32 addrspace(1)* %out, i32 addrspace(2)* nocapture readonly %in) #1 { entry: %tmp0 = tail call i32 @llvm.r600.read.tidig.x() #1 %tmp1 = getelementptr inbounds i32, i32 addrspace(2)* %in, i32 %tmp0 %tmp2 = bitcast i32 addrspace(2)* %tmp1 to <16 x i32> addrspace(2)* %tmp3 = load <16 x i32>, <16 x i32> addrspace(2)* %tmp2, align 4 %elt0 = extractelement <16 x i32> %tmp3, i32 0 %elt1 = extractelement <16 x i32> %tmp3, i32 1 %elt2 = extractelement <16 x i32> %tmp3, i32 2 %elt3 = extractelement <16 x i32> %tmp3, i32 3 %elt4 = extractelement <16 x i32> %tmp3, i32 4 %elt5 = extractelement <16 x i32> %tmp3, i32 5 %elt6 = extractelement <16 x i32> %tmp3, i32 6 %elt7 = extractelement <16 x i32> %tmp3, i32 7 %elt8 = extractelement <16 x i32> %tmp3, i32 8 %elt9 = extractelement <16 x i32> %tmp3, i32 9 %elt10 = extractelement <16 x i32> %tmp3, i32 10 %elt11 = extractelement <16 x i32> %tmp3, i32 11 %elt12 = extractelement <16 x i32> %tmp3, i32 12 %elt13 = extractelement <16 x i32> %tmp3, i32 13 %elt14 = extractelement <16 x i32> %tmp3, i32 14 %elt15 = extractelement <16 x i32> %tmp3, i32 15 %add0 = add i32 %elt0, %elt1 %add1 = add i32 %add0, %elt2 %add2 = add i32 %add1, %elt3 %add3 = add i32 %add2, %elt4 %add4 = add i32 %add3, %elt5 %add5 = add i32 %add4, %elt6 %add6 = add i32 %add5, %elt7 %add7 = add i32 %add6, %elt8 %add8 = add i32 %add7, %elt9 %add9 = add i32 %add8, %elt10 %add10 = add i32 %add9, %elt11 %add11 = add i32 %add10, %elt12 %add12 = add i32 %add11, %elt13 %add13 = add i32 %add12, %elt14 %add14 = add i32 %add13, %elt15 store i32 %add14, i32 addrspace(1)* %out ret void } attributes #0 = { nounwind readnone } attributes #1 = { nounwind }