//===---------------------------------------------------------------------===// // Random ideas for the X86 backend: SSE-specific stuff. //===---------------------------------------------------------------------===// //===---------------------------------------------------------------------===// SSE Variable shift can be custom lowered to something like this, which uses a small table + unaligned load + shuffle instead of going through memory. __m128i_shift_right: .byte 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 .byte -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 ... __m128i shift_right(__m128i value, unsigned long offset) { return _mm_shuffle_epi8(value, _mm_loadu_si128((__m128 *) (___m128i_shift_right + offset))); } //===---------------------------------------------------------------------===// SSE has instructions for doing operations on complex numbers, we should pattern match them. For example, this should turn into a horizontal add: typedef float __attribute__((vector_size(16))) v4f32; float f32(v4f32 A) { return A[0]+A[1]+A[2]+A[3]; } Instead we get this: _f32: ## @f32 pshufd $1, %xmm0, %xmm1 ## xmm1 = xmm0[1,0,0,0] addss %xmm0, %xmm1 pshufd $3, %xmm0, %xmm2 ## xmm2 = xmm0[3,0,0,0] movhlps %xmm0, %xmm0 ## xmm0 = xmm0[1,1] movaps %xmm0, %xmm3 addss %xmm1, %xmm3 movdqa %xmm2, %xmm0 addss %xmm3, %xmm0 ret Also, there are cases where some simple local SLP would improve codegen a bit. compiling this: _Complex float f32(_Complex float A, _Complex float B) { return A+B; } into: _f32: ## @f32 movdqa %xmm0, %xmm2 addss %xmm1, %xmm2 pshufd $1, %xmm1, %xmm1 ## xmm1 = xmm1[1,0,0,0] pshufd $1, %xmm0, %xmm3 ## xmm3 = xmm0[1,0,0,0] addss %xmm1, %xmm3 movaps %xmm2, %xmm0 unpcklps %xmm3, %xmm0 ## xmm0 = xmm0[0],xmm3[0],xmm0[1],xmm3[1] ret seems silly when it could just be one addps. //===---------------------------------------------------------------------===// Expand libm rounding functions inline: Significant speedups possible. http://gcc.gnu.org/ml/gcc-patches/2006-10/msg00909.html //===---------------------------------------------------------------------===// When compiled with unsafemath enabled, "main" should enable SSE DAZ mode and other fast SSE modes. //===---------------------------------------------------------------------===// Think about doing i64 math in SSE regs on x86-32. //===---------------------------------------------------------------------===// This testcase should have no SSE instructions in it, and only one load from a constant pool: double %test3(bool %B) { %C = select bool %B, double 123.412, double 523.01123123 ret double %C } Currently, the select is being lowered, which prevents the dag combiner from turning 'select (load CPI1), (load CPI2)' -> 'load (select CPI1, CPI2)' The pattern isel got this one right. //===---------------------------------------------------------------------===// Lower memcpy / memset to a series of SSE 128 bit move instructions when it's feasible. //===---------------------------------------------------------------------===// Codegen: if (copysign(1.0, x) == copysign(1.0, y)) into: if (x^y & mask) when using SSE. //===---------------------------------------------------------------------===// Use movhps to update upper 64-bits of a v4sf value. Also movlps on lower half of a v4sf value. //===---------------------------------------------------------------------===// Better codegen for vector_shuffles like this { x, 0, 0, 0 } or { x, 0, x, 0}. Perhaps use pxor / xorp* to clear a XMM register first? //===---------------------------------------------------------------------===// External test Nurbs exposed some problems. Look for __ZN15Nurbs_SSE_Cubic17TessellateSurfaceE, bb cond_next140. This is what icc emits: movaps (%edx), %xmm2 #59.21 movaps (%edx), %xmm5 #60.21 movaps (%edx), %xmm4 #61.21 movaps (%edx), %xmm3 #62.21 movl 40(%ecx), %ebp #69.49 shufps $0, %xmm2, %xmm5 #60.21 movl 100(%esp), %ebx #69.20 movl (%ebx), %edi #69.20 imull %ebp, %edi #69.49 addl (%eax), %edi #70.33 shufps $85, %xmm2, %xmm4 #61.21 shufps $170, %xmm2, %xmm3 #62.21 shufps $255, %xmm2, %xmm2 #63.21 lea (%ebp,%ebp,2), %ebx #69.49 negl %ebx #69.49 lea -3(%edi,%ebx), %ebx #70.33 shll $4, %ebx #68.37 addl 32(%ecx), %ebx #68.37 testb $15, %bl #91.13 jne L_B1.24 # Prob 5% #91.13 This is the llvm code after instruction scheduling: cond_next140 (0xa910740, LLVM BB @0xa90beb0): %reg1078 = MOV32ri -3 %reg1079 = ADD32rm %reg1078, %reg1068, 1, %NOREG, 0 %reg1037 = MOV32rm %reg1024, 1, %NOREG, 40 %reg1080 = IMUL32rr %reg1079, %reg1037 %reg1081 = MOV32rm %reg1058, 1, %NOREG, 0 %reg1038 = LEA32r %reg1081, 1, %reg1080, -3 %reg1036 = MOV32rm %reg1024, 1, %NOREG, 32 %reg1082 = SHL32ri %reg1038, 4 %reg1039 = ADD32rr %reg1036, %reg1082 %reg1083 = MOVAPSrm %reg1059, 1, %NOREG, 0 %reg1034 = SHUFPSrr %reg1083, %reg1083, 170 %reg1032 = SHUFPSrr %reg1083, %reg1083, 0 %reg1035 = SHUFPSrr %reg1083, %reg1083, 255 %reg1033 = SHUFPSrr %reg1083, %reg1083, 85 %reg1040 = MOV32rr %reg1039 %reg1084 = AND32ri8 %reg1039, 15 CMP32ri8 %reg1084, 0 JE mbb Still ok. After register allocation: cond_next140 (0xa910740, LLVM BB @0xa90beb0): %EAX = MOV32ri -3 %EDX = MOV32rm , 1, %NOREG, 0 ADD32rm %EAX, %EDX, 1, %NOREG, 0 %EDX = MOV32rm , 1, %NOREG, 0 %EDX = MOV32rm %EDX, 1, %NOREG, 40 IMUL32rr %EAX, %EDX %ESI = MOV32rm , 1, %NOREG, 0 %ESI = MOV32rm %ESI, 1, %NOREG, 0 MOV32mr , 1, %NOREG, 0, %ESI %EAX = LEA32r %ESI, 1, %EAX, -3 %ESI = MOV32rm , 1, %NOREG, 0 %ESI = MOV32rm %ESI, 1, %NOREG, 32 %EDI = MOV32rr %EAX SHL32ri %EDI, 4 ADD32rr %EDI, %ESI %XMM0 = MOVAPSrm %ECX, 1, %NOREG, 0 %XMM1 = MOVAPSrr %XMM0 SHUFPSrr %XMM1, %XMM1, 170 %XMM2 = MOVAPSrr %XMM0 SHUFPSrr %XMM2, %XMM2, 0 %XMM3 = MOVAPSrr %XMM0 SHUFPSrr %XMM3, %XMM3, 255 SHUFPSrr %XMM0, %XMM0, 85 %EBX = MOV32rr %EDI AND32ri8 %EBX, 15 CMP32ri8 %EBX, 0 JE mbb This looks really bad. The problem is shufps is a destructive opcode. Since it appears as operand two in more than one shufps ops. It resulted in a number of copies. Note icc also suffers from the same problem. Either the instruction selector should select pshufd or The register allocator can made the two-address to three-address transformation. It also exposes some other problems. See MOV32ri -3 and the spills. //===---------------------------------------------------------------------===// Consider: __m128 test(float a) { return _mm_set_ps(0.0, 0.0, 0.0, a*a); } This compiles into: movss 4(%esp), %xmm1 mulss %xmm1, %xmm1 xorps %xmm0, %xmm0 movss %xmm1, %xmm0 ret Because mulss doesn't modify the top 3 elements, the top elements of xmm1 are already zero'd. We could compile this to: movss 4(%esp), %xmm0 mulss %xmm0, %xmm0 ret //===---------------------------------------------------------------------===// Here's a sick and twisted idea. Consider code like this: __m128 test(__m128 a) { float b = *(float*)&A; ... return _mm_set_ps(0.0, 0.0, 0.0, b); } This might compile to this code: movaps c(%esp), %xmm1 xorps %xmm0, %xmm0 movss %xmm1, %xmm0 ret Now consider if the ... code caused xmm1 to get spilled. This might produce this code: movaps c(%esp), %xmm1 movaps %xmm1, c2(%esp) ... xorps %xmm0, %xmm0 movaps c2(%esp), %xmm1 movss %xmm1, %xmm0 ret However, since the reload is only used by these instructions, we could "fold" it into the uses, producing something like this: movaps c(%esp), %xmm1 movaps %xmm1, c2(%esp) ... movss c2(%esp), %xmm0 ret ... saving two instructions. The basic idea is that a reload from a spill slot, can, if only one 4-byte chunk is used, bring in 3 zeros the one element instead of 4 elements. This can be used to simplify a variety of shuffle operations, where the elements are fixed zeros. //===---------------------------------------------------------------------===// This code generates ugly code, probably due to costs being off or something: define void @test(float* %P, <4 x float>* %P2 ) { %xFloat0.688 = load float* %P %tmp = load <4 x float>* %P2 %inFloat3.713 = insertelement <4 x float> %tmp, float 0.0, i32 3 store <4 x float> %inFloat3.713, <4 x float>* %P2 ret void } Generates: _test: movl 8(%esp), %eax movaps (%eax), %xmm0 pxor %xmm1, %xmm1 movaps %xmm0, %xmm2 shufps $50, %xmm1, %xmm2 shufps $132, %xmm2, %xmm0 movaps %xmm0, (%eax) ret Would it be better to generate: _test: movl 8(%esp), %ecx movaps (%ecx), %xmm0 xor %eax, %eax pinsrw $6, %eax, %xmm0 pinsrw $7, %eax, %xmm0 movaps %xmm0, (%ecx) ret ? //===---------------------------------------------------------------------===// Some useful information in the Apple Altivec / SSE Migration Guide: http://developer.apple.com/documentation/Performance/Conceptual/ Accelerate_sse_migration/index.html e.g. SSE select using and, andnot, or. Various SSE compare translations. //===---------------------------------------------------------------------===// Add hooks to commute some CMPP operations. //===---------------------------------------------------------------------===// Apply the same transformation that merged four float into a single 128-bit load to loads from constant pool. //===---------------------------------------------------------------------===// Floating point max / min are commutable when -enable-unsafe-fp-path is specified. We should turn int_x86_sse_max_ss and X86ISD::FMIN etc. into other nodes which are selected to max / min instructions that are marked commutable. //===---------------------------------------------------------------------===// We should materialize vector constants like "all ones" and "signbit" with code like: cmpeqps xmm1, xmm1 ; xmm1 = all-ones and: cmpeqps xmm1, xmm1 ; xmm1 = all-ones psrlq xmm1, 31 ; xmm1 = all 100000000000... instead of using a load from the constant pool. The later is important for ABS/NEG/copysign etc. //===---------------------------------------------------------------------===// These functions: #include __m128i a; void x(unsigned short n) { a = _mm_slli_epi32 (a, n); } void y(unsigned n) { a = _mm_slli_epi32 (a, n); } compile to ( -O3 -static -fomit-frame-pointer): _x: movzwl 4(%esp), %eax movd %eax, %xmm0 movaps _a, %xmm1 pslld %xmm0, %xmm1 movaps %xmm1, _a ret _y: movd 4(%esp), %xmm0 movaps _a, %xmm1 pslld %xmm0, %xmm1 movaps %xmm1, _a ret "y" looks good, but "x" does silly movzwl stuff around into a GPR. It seems like movd would be sufficient in both cases as the value is already zero extended in the 32-bit stack slot IIRC. For signed short, it should also be save, as a really-signed value would be undefined for pslld. //===---------------------------------------------------------------------===// #include int t1(double d) { return signbit(d); } This currently compiles to: subl $12, %esp movsd 16(%esp), %xmm0 movsd %xmm0, (%esp) movl 4(%esp), %eax shrl $31, %eax addl $12, %esp ret We should use movmskp{s|d} instead. //===---------------------------------------------------------------------===// CodeGen/X86/vec_align.ll tests whether we can turn 4 scalar loads into a single (aligned) vector load. This functionality has a couple of problems. 1. The code to infer alignment from loads of globals is in the X86 backend, not the dag combiner. This is because dagcombine2 needs to be able to see through the X86ISD::Wrapper node, which DAGCombine can't really do. 2. The code for turning 4 x load into a single vector load is target independent and should be moved to the dag combiner. 3. The code for turning 4 x load into a vector load can only handle a direct load from a global or a direct load from the stack. It should be generalized to handle any load from P, P+4, P+8, P+12, where P can be anything. 4. The alignment inference code cannot handle loads from globals in non-static mode because it doesn't look through the extra dyld stub load. If you try vec_align.ll without -relocation-model=static, you'll see what I mean. //===---------------------------------------------------------------------===// We should lower store(fneg(load p), q) into an integer load+xor+store, which eliminates a constant pool load. For example, consider: define i64 @ccosf(float %z.0, float %z.1) nounwind readonly { entry: %tmp6 = fsub float -0.000000e+00, %z.1 ; [#uses=1] %tmp20 = tail call i64 @ccoshf( float %tmp6, float %z.0 ) nounwind readonly ret i64 %tmp20 } declare i64 @ccoshf(float %z.0, float %z.1) nounwind readonly This currently compiles to: LCPI1_0: # <4 x float> .long 2147483648 # float -0 .long 2147483648 # float -0 .long 2147483648 # float -0 .long 2147483648 # float -0 _ccosf: subl $12, %esp movss 16(%esp), %xmm0 movss %xmm0, 4(%esp) movss 20(%esp), %xmm0 xorps LCPI1_0, %xmm0 movss %xmm0, (%esp) call L_ccoshf$stub addl $12, %esp ret Note the load into xmm0, then xor (to negate), then store. In PIC mode, this code computes the pic base and does two loads to do the constant pool load, so the improvement is much bigger. The tricky part about this xform is that the argument load/store isn't exposed until post-legalize, and at that point, the fneg has been custom expanded into an X86 fxor. This means that we need to handle this case in the x86 backend instead of in target independent code. //===---------------------------------------------------------------------===// Non-SSE4 insert into 16 x i8 is atrociously bad. //===---------------------------------------------------------------------===// <2 x i64> extract is substantially worse than <2 x f64>, even if the destination is memory. //===---------------------------------------------------------------------===// INSERTPS can match any insert (extract, imm1), imm2 for 4 x float, and insert any number of 0.0 simultaneously. Currently we only use it for simple insertions. See comments in LowerINSERT_VECTOR_ELT_SSE4. //===---------------------------------------------------------------------===// On a random note, SSE2 should declare insert/extract of 2 x f64 as legal, not Custom. All combinations of insert/extract reg-reg, reg-mem, and mem-reg are legal, it'll just take a few extra patterns written in the .td file. Note: this is not a code quality issue; the custom lowered code happens to be right, but we shouldn't have to custom lower anything. This is probably related to <2 x i64> ops being so bad. //===---------------------------------------------------------------------===// LLVM currently generates stack realignment code, when it is not necessary needed. The problem is that we need to know about stack alignment too early, before RA runs. At that point we don't know, whether there will be vector spill, or not. Stack realignment logic is overly conservative here, but otherwise we can produce unaligned loads/stores. Fixing this will require some huge RA changes. Testcase: #include typedef short vSInt16 __attribute__ ((__vector_size__ (16))); static const vSInt16 a = {- 22725, - 12873, - 22725, - 12873, - 22725, - 12873, - 22725, - 12873};; vSInt16 madd(vSInt16 b) { return _mm_madd_epi16(a, b); } Generated code (x86-32, linux): madd: pushl %ebp movl %esp, %ebp andl $-16, %esp movaps .LCPI1_0, %xmm1 pmaddwd %xmm1, %xmm0 movl %ebp, %esp popl %ebp ret //===---------------------------------------------------------------------===// Consider: #include __m128 foo2 (float x) { return _mm_set_ps (0, 0, x, 0); } In x86-32 mode, we generate this spiffy code: _foo2: movss 4(%esp), %xmm0 pshufd $81, %xmm0, %xmm0 ret in x86-64 mode, we generate this code, which could be better: _foo2: xorps %xmm1, %xmm1 movss %xmm0, %xmm1 pshufd $81, %xmm1, %xmm0 ret In sse4 mode, we could use insertps to make both better. Here's another testcase that could use insertps [mem]: #include extern float x2, x3; __m128 foo1 (float x1, float x4) { return _mm_set_ps (x2, x1, x3, x4); } gcc mainline compiles it to: foo1: insertps $0x10, x2(%rip), %xmm0 insertps $0x10, x3(%rip), %xmm1 movaps %xmm1, %xmm2 movlhps %xmm0, %xmm2 movaps %xmm2, %xmm0 ret //===---------------------------------------------------------------------===// We compile vector multiply-by-constant into poor code: define <4 x i32> @f(<4 x i32> %i) nounwind { %A = mul <4 x i32> %i, < i32 10, i32 10, i32 10, i32 10 > ret <4 x i32> %A } On targets without SSE4.1, this compiles into: LCPI1_0: ## <4 x i32> .long 10 .long 10 .long 10 .long 10 .text .align 4,0x90 .globl _f _f: pshufd $3, %xmm0, %xmm1 movd %xmm1, %eax imull LCPI1_0+12, %eax movd %eax, %xmm1 pshufd $1, %xmm0, %xmm2 movd %xmm2, %eax imull LCPI1_0+4, %eax movd %eax, %xmm2 punpckldq %xmm1, %xmm2 movd %xmm0, %eax imull LCPI1_0, %eax movd %eax, %xmm1 movhlps %xmm0, %xmm0 movd %xmm0, %eax imull LCPI1_0+8, %eax movd %eax, %xmm0 punpckldq %xmm0, %xmm1 movaps %xmm1, %xmm0 punpckldq %xmm2, %xmm0 ret It would be better to synthesize integer vector multiplication by constants using shifts and adds, pslld and paddd here. And even on targets with SSE4.1, simple cases such as multiplication by powers of two would be better as vector shifts than as multiplications. //===---------------------------------------------------------------------===// We compile this: __m128i foo2 (char x) { return _mm_set_epi8 (1, 0, 0, 0, 0, 0, 0, 0, 0, x, 0, 1, 0, 0, 0, 0); } into: movl $1, %eax xorps %xmm0, %xmm0 pinsrw $2, %eax, %xmm0 movzbl 4(%esp), %eax pinsrw $3, %eax, %xmm0 movl $256, %eax pinsrw $7, %eax, %xmm0 ret gcc-4.2: subl $12, %esp movzbl 16(%esp), %eax movdqa LC0, %xmm0 pinsrw $3, %eax, %xmm0 addl $12, %esp ret .const .align 4 LC0: .word 0 .word 0 .word 1 .word 0 .word 0 .word 0 .word 0 .word 256 With SSE4, it should be movdqa .LC0(%rip), %xmm0 pinsrb $6, %edi, %xmm0 //===---------------------------------------------------------------------===// We should transform a shuffle of two vectors of constants into a single vector of constants. Also, insertelement of a constant into a vector of constants should also result in a vector of constants. e.g. 2008-06-25-VecISelBug.ll. We compiled it to something horrible: .align 4 LCPI1_1: ## float .long 1065353216 ## float 1 .const .align 4 LCPI1_0: ## <4 x float> .space 4 .long 1065353216 ## float 1 .space 4 .long 1065353216 ## float 1 .text .align 4,0x90 .globl _t _t: xorps %xmm0, %xmm0 movhps LCPI1_0, %xmm0 movss LCPI1_1, %xmm1 movaps %xmm0, %xmm2 shufps $2, %xmm1, %xmm2 shufps $132, %xmm2, %xmm0 movaps %xmm0, 0 //===---------------------------------------------------------------------===// rdar://5907648 This function: float foo(unsigned char x) { return x; } compiles to (x86-32): define float @foo(i8 zeroext %x) nounwind { %tmp12 = uitofp i8 %x to float ; [#uses=1] ret float %tmp12 } compiles to: _foo: subl $4, %esp movzbl 8(%esp), %eax cvtsi2ss %eax, %xmm0 movss %xmm0, (%esp) flds (%esp) addl $4, %esp ret We should be able to use: cvtsi2ss 8($esp), %xmm0 since we know the stack slot is already zext'd. //===---------------------------------------------------------------------===// Consider using movlps instead of movsd to implement (scalar_to_vector (loadf64)) when code size is critical. movlps is slower than movsd on core2 but it's one byte shorter. //===---------------------------------------------------------------------===// We should use a dynamic programming based approach to tell when using FPStack operations is cheaper than SSE. SciMark montecarlo contains code like this for example: double MonteCarlo_num_flops(int Num_samples) { return ((double) Num_samples)* 4.0; } In fpstack mode, this compiles into: LCPI1_0: .long 1082130432 ## float 4.000000e+00 _MonteCarlo_num_flops: subl $4, %esp movl 8(%esp), %eax movl %eax, (%esp) fildl (%esp) fmuls LCPI1_0 addl $4, %esp ret in SSE mode, it compiles into significantly slower code: _MonteCarlo_num_flops: subl $12, %esp cvtsi2sd 16(%esp), %xmm0 mulsd LCPI1_0, %xmm0 movsd %xmm0, (%esp) fldl (%esp) addl $12, %esp ret There are also other cases in scimark where using fpstack is better, it is cheaper to do fld1 than load from a constant pool for example, so "load, add 1.0, store" is better done in the fp stack, etc. //===---------------------------------------------------------------------===// These should compile into the same code (PR6214): Perhaps instcombine should canonicalize the former into the later? define float @foo(float %x) nounwind { %t = bitcast float %x to i32 %s = and i32 %t, 2147483647 %d = bitcast i32 %s to float ret float %d } declare float @fabsf(float %n) define float @bar(float %x) nounwind { %d = call float @fabsf(float %x) ret float %d } //===---------------------------------------------------------------------===// This IR (from PR6194): target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128" target triple = "x86_64-apple-darwin10.0.0" %0 = type { double, double } %struct.float3 = type { float, float, float } define void @test(%0, %struct.float3* nocapture %res) nounwind noinline ssp { entry: %tmp18 = extractvalue %0 %0, 0 ; [#uses=1] %tmp19 = bitcast double %tmp18 to i64 ; [#uses=1] %tmp20 = zext i64 %tmp19 to i128 ; [#uses=1] %tmp10 = lshr i128 %tmp20, 32 ; [#uses=1] %tmp11 = trunc i128 %tmp10 to i32 ; [#uses=1] %tmp12 = bitcast i32 %tmp11 to float ; [#uses=1] %tmp5 = getelementptr inbounds %struct.float3* %res, i64 0, i32 1 ; [#uses=1] store float %tmp12, float* %tmp5 ret void } Compiles to: _test: ## @test movd %xmm0, %rax shrq $32, %rax movl %eax, 4(%rdi) ret This would be better kept in the SSE unit by treating XMM0 as a 4xfloat and doing a shuffle from v[1] to v[0] then a float store. //===---------------------------------------------------------------------===// [UNSAFE FP] void foo(double, double, double); void norm(double x, double y, double z) { double scale = __builtin_sqrt(x*x + y*y + z*z); foo(x/scale, y/scale, z/scale); } We currently generate an sqrtsd and 3 divsd instructions. This is bad, fp div is slow and not pipelined. In -ffast-math mode we could compute "1.0/scale" first and emit 3 mulsd in place of the divs. This can be done as a target-independent transform. If we're dealing with floats instead of doubles we could even replace the sqrtss and inversion with an rsqrtss instruction, which computes 1/sqrt faster at the cost of reduced accuracy. //===---------------------------------------------------------------------===// This function should be matched to haddpd when the appropriate CPU is enabled: #include double f (__m128d p) { return p[0] + p[1]; } similarly, v[0]-v[1] should match to hsubpd, and {v[0]-v[1], w[0]-w[1]} should turn into hsubpd also. //===---------------------------------------------------------------------===// define <2 x i32> @foo(<2 x double> %in) { %x = fptosi <2 x double> %in to <2 x i32> ret <2 x i32> %x } Should compile into cvttpd2dq instead of being scalarized into 2 cvttsd2si. //===---------------------------------------------------------------------===//