Getting Started with the LLVM System

Written by: John Criswell, Chris Lattner, Misha Brukman, Vikram Adve, and Guochun Shi.

Overview

Welcome to LLVM! In order to get started, you first need to know some basic information.

First, LLVM comes in two pieces. The first piece is the LLVM suite. This contains all of the tools, libraries, and header files needed to use the low level virtual machine. It contains an assembler, disassembler, bytecode analyzer and bytecode optimizer. It also contains a test suite that can be used to test the LLVM tools and the GCC front end.

The second piece is the GCC front end. This component provides a version of GCC that compiles C and C++ code into LLVM bytecode. Currently, the GCC front end is a modified version of GCC 3.4 (we track the GCC 3.4 development). Once compiled into LLVM bytecode, a program can be manipulated with the LLVM tools from the LLVM suite.

There is a third, optional piece called llvm-test. It is a suite of programs with a testing harness that can be used to further test LLVM's functionality and performance.

Getting Started Quickly (A Summary)

Here's the short story for getting up and running quickly with LLVM:

  1. Read the documentation.
  2. Read the documentation.
  3. Remember that you were warned twice about reading the documentation.
  4. Install the GCC front end if you intend to compile C or C++:
    1. cd where-you-want-the-C-front-end-to-live
    2. gunzip --stdout llvm-gcc.platform.tar.gz | tar -xvf -
    3. cd llvm-gcc3.4/platform (llvm-gcc3.4 only)
      ./fixheaders
    4. Add llvm-gcc's "bin" directory to your PATH variable.
  5. Get the LLVM Source Code
    • With the distributed files (or use CVS):
      1. cd where-you-want-llvm-to-live
      2. gunzip --stdout llvm-version.tar.gz | tar -xvf -
  6. [Optional] Get the Test Suite Source Code
    • With the distributed files (or use CVS):
      1. cd where-you-want-llvm-to-live
      2. cd llvm/projects
      3. gunzip --stdout llvm-test-version.tar.gz | tar -xvf -
  7. Configure the LLVM Build Environment
    1. cd where-you-want-to-build-llvm
    2. /path/to/llvm/configure [options]
      Some common options:
      • --prefix=directory

        Specify for directory the full pathname of where you want the LLVM tools and libraries to be installed (default /usr/local).

      • --with-llvmgccdir=directory

        Optionally, specify for directory the full pathname of the C/C++ front end installation to use with this LLVM configuration. If not specified, the PATH will be searched.

      • --enable-spec2000=directory

        Enable the SPEC2000 benchmarks for testing. The SPEC2000 benchmarks should be available in directory.

  8. Build the LLVM Suite:
    1. gmake -k |& tee gnumake.out    # this is csh or tcsh syntax
    2. If you get an "internal compiler error (ICE)" or test failures, see below.

Consult the Getting Started with LLVM section for detailed information on configuring and compiling LLVM. See Setting Up Your Environment for tips that simplify working with the GCC front end and LLVM tools. Go to Program Layout to learn about the layout of the source code tree.

Requirements

Before you begin to use the LLVM system, review the requirements given below. This may save you some trouble by knowing ahead of time what hardware and software you will need.

Hardware

LLVM is known to work on the following platforms:

OS Arch Compilers
Linux x861 GCC
Solaris V9 (Ultrasparc) GCC
FreeBSD x861 GCC
MacOS X2 PowerPC GCC
MacOS X2 x86 GCC
Cygwin/Win32 x861,8 GCC 3.4.X, binutils 2.15
MinGW/Win32 x861,6,8 GCC 3.4.X, binutils 2.15
Linux amd643 GCC

LLVM has partial support for the following platforms:

OS Arch Compilers
Windows x861 Visual Studio .NET4,5
AIX3,4 PowerPC GCC
Linux3,5 PowerPC GCC
Linux7 Alpha GCC
Linux7 Itanium (IA-64) GCC
HP-UX7 Itanium (IA-64) HP aCC

Notes:

  1. Code generation supported for Pentium processors and up
  2. Code generation supported for 32-bit ABI only
  3. No native code generation
  4. Build is not complete: one or more tools don't link
  5. The GCC-based C/C++ frontend does not build
  6. The port is done using the MSYS shell. Download and install bison (excl. M4.exe) and flex in that order. Build binutils-2.15 from source, if necessary. Bison & flex can be also grabbed from GNUWin32 sf.net project.
  7. Native code generation exists but is not complete.
  8. Binutils up to post-2.17 has bug in bfd/cofflink.c preventing LLVM from building correctly. Several workarounds have been introduced into LLVM build system, but the bug can occur anytime in the future. We highly recommend that you rebuild your current binutils with the patch from Binutils bugzilla, if it wasn't already applied.

Note that you will need about 1-3 GB of space for a full LLVM build in Debug mode, depending on the system (it is so large because of all the debugging information and the fact that the libraries are statically linked into multiple tools). If you do not need many of the tools and you are space-conscious, you can disable them individually in llvm/tools/Makefile. The Release build requires considerably less space.

The LLVM suite may compile on other platforms, but it is not guaranteed to do so. If compilation is successful, the LLVM utilities should be able to assemble, disassemble, analyze, and optimize LLVM bytecode. Code generation should work as well, although the generated native code may not work on your platform.

The GCC front end is not very portable at the moment. If you want to get it to work on another platform, you can download a copy of the source and try to compile it on your platform.

Software

Compiling LLVM requires that you have several software packages installed. The table below lists those required packages. The Package column is the usual name for the software package that LLVM depends on. The Version column provides "known to work" versions of the package. The Notes column describes how LLVM uses the package and provides other details.

PackageVersionNotes
GNU Make 3.79, 3.79.1 Makefile/build processor
GCC 3.4.2 C/C++ compiler1
TeXinfo 4.5 For building the CFE
Flex 2.5.4 LEX compiler
Bison 1.28, 1.35, 1.75, 1.875d, 2.0, or 2.1
(not 1.85 or 1.875)
YACC compiler
CVS ≥1.11 CVS access to LLVM2
DejaGnu 1.4.2 Automated test suite3
tcl 8.3, 8.4 Automated test suite3
expect 5.38.0 Automated test suite3
perl ≥5.6.0 Nightly tester, utilities
GNU M4 1.4 Macro processor for configuration4
GNU Autoconf 2.59 Configuration script builder4
GNU Automake 1.9.2 aclocal macro generator4
libtool 1.5.10 Shared library manager4

Notes:

  1. Only the C and C++ languages are needed so there's no need to build the other languages for LLVM's purposes. See below for specific version info.
  2. You only need CVS if you intend to build from the latest LLVM sources. If you're working from a release distribution, you don't need CVS.
  3. Only needed if you want to run the automated test suite in the llvm/test directory.
  4. If you want to make changes to the configure scripts, you will need GNU autoconf (2.59), and consequently, GNU M4 (version 1.4 or higher). You will also need automake (1.9.2). We only use aclocal from that package.

Additionally, your compilation host is expected to have the usual plethora of Unix utilities. Specifically:

Broken versions of GCC

LLVM is very demanding of the host C++ compiler, and as such tends to expose bugs in the compiler. In particular, several versions of GCC crash when trying to compile LLVM. We routinely use GCC 3.3.3, 3.4.0, and Apple 4.0.1 successfully with them (however, see below). Other versions of GCC will probably work as well. GCC versions listed here are known to not work. If you are using one of these versions, please try to upgrade your GCC to something more recent. If you run into a problem with a version of GCC not listed here, please let us know. Please use the "gcc -v" command to find out which version of GCC you are using.

GCC versions prior to 3.0: GCC 2.96.x and before had several problems in the STL that effectively prevent it from compiling LLVM.

GCC 3.2.2: This version of GCC fails to compile LLVM.

GCC 3.3.2: This version of GCC suffered from a serious bug which causes it to crash in the "convert_from_eh_region_ranges_1" GCC function.

Cygwin GCC 3.3.3: The version of GCC 3.3.3 commonly shipped with Cygwin does not work. Please upgrade to a newer version if possible.

SuSE GCC 3.3.3: The version of GCC 3.3.3 shipped with SuSE 9.1 (and possibly others) does not compile LLVM correctly (it appears that exception handling is broken in some cases). Please download the FSF 3.3.3 or upgrade to a newer version of GCC.

IA-64 GCC 4.0.0: The IA-64 version of GCC 4.0.0 is known to miscompile LLVM.

Apple Xcode 2.3: GCC crashes when compiling LLVM at -O3 (which is the default with ENABLE_OPTIMIZED=1. To work around this, build with "ENABLE_OPTIMIZED=1 OPTIMIZE_OPTION=-O2".

GCC 4.1.1: GCC fails to build LLVM with template concept check errors compiling some files. At the time of this writing, GCC mainline (4.2) did not share the problem.

GCC 4.1.1 on X86-64/amd64: GCC miscompiles portions of LLVM when compiling llvm itself into 64-bit code. LLVM will appear to mostly work but will be buggy, e.g. failing portions of its testsuite.

GNU ld 2.16.X. Some 2.16.X versions of the ld linker will produce very long warning messages complaining that some ".gnu.linkonce.t.*" symbol was defined in a discarded section. You can safely ignore these messages as they are erroneous and the linkage is correct. These messages disappear using ld 2.17.

Getting Started with LLVM

The remainder of this guide is meant to get you up and running with LLVM and to give you some basic information about the LLVM environment.

The later sections of this guide describe the general layout of the the LLVM source tree, a simple example using the LLVM tool chain, and links to find more information about LLVM or to get help via e-mail.

Terminology and Notation

Throughout this manual, the following names are used to denote paths specific to the local system and working environment. These are not environment variables you need to set but just strings used in the rest of this document below. In any of the examples below, simply replace each of these names with the appropriate pathname on your local system. All these paths are absolute:

SRC_ROOT
This is the top level directory of the LLVM source tree.

OBJ_ROOT
This is the top level directory of the LLVM object tree (i.e. the tree where object files and compiled programs will be placed. It can be the same as SRC_ROOT).

LLVMGCCDIR
This is where the LLVM GCC Front End is installed.

For the pre-built GCC front end binaries, the LLVMGCCDIR is llvm-gcc/platform/llvm-gcc.

Setting Up Your Environment

In order to compile and use LLVM, you may need to set some environment variables.

LLVM_LIB_SEARCH_PATH=/path/to/your/bytecode/libs
[Optional] This environment variable helps LLVM linking tools find the locations of your bytecode libraries. It is provided only as a convenience since you can specify the paths using the -L options of the tools and the C/C++ front-end will automatically use the bytecode files installed in its lib directory.
Unpacking the LLVM Archives

If you have the LLVM distribution, you will need to unpack it before you can begin to compile it. LLVM is distributed as a set of two files: the LLVM suite and the LLVM GCC front end compiled for your platform. There is an additional test suite that is optional. Each file is a TAR archive that is compressed with the gzip program.

The files are as follows, with x.y marking the version number:

llvm-x.y.tar.gz
Source release for the LLVM libraries and tools.
llvm-test-x.y.tar.gz
Source release for the LLVM test suite.
llvm-gcc4-x.y.source.tar.gz
Source release of the llvm-gcc4 front end. See README.LLVM in the root directory for build instructions.
llvm-gcc4-x.y-platform.tar.gz
Binary release of the llvm-gcc4 front end for a specific platform.

It is also possible to download the sources of the llvm-gcc4 front end from a read-only subversion mirror at svn://anonsvn.opensource.apple.com/svn/llvm/trunk.

Checkout LLVM from CVS

If you have access to our CVS repository, you can get a fresh copy of the entire source code. All you need to do is check it out from CVS as follows:

This will create an 'llvm' directory in the current directory and fully populate it with the LLVM source code, Makefiles, test directories, and local copies of documentation files.

If you want to get a specific release (as opposed to the most recent revision), you can specify a label. The following releases have the following labels:

If you would like to get the LLVM test suite (a separate package as of 1.4), you get it from the CVS repository:

  cd llvm/projects
  cvs -z3 -d :pserver:anon@llvm.org:/var/cvs/llvm co llvm-test

By placing it in the llvm/projects, it will be automatically configured by the LLVM configure script as well as automatically updated when you run cvs update.

If you would like to get the GCC 3.4 front end source code, you can also get it from the CVS repository:

  cvs -z3 -d :pserver:anon@llvm.org:/var/cvs/llvm co llvm-gcc

Please note that you must follow these instructions to successfully build the LLVM GCC front-end.

Install the GCC Front End

Before configuring and compiling the LLVM suite, you need to extract the LLVM GCC front end from the binary distribution. It is used for building the bytecode libraries later used by the GCC front end for linking programs, and its location must be specified when the LLVM suite is configured.

To install the GCC front end, do the following:

  1. cd where-you-want-the-front-end-to-live
  2. gunzip --stdout llvmgcc-version.platform.tar.gz | tar -xvf -

The binary versions of the GCC front end may not suit all of your needs. For example, the binary distribution may include an old version of a system header file, not "fix" a header file that needs to be fixed for GCC, or it may be linked with libraries not available on your system.

In cases like these, you may want to try building the GCC front end from source. This is not for the faint of heart, so be forewarned.

Local LLVM Configuration

Once checked out from the CVS repository, the LLVM suite source code must be configured via the configure script. This script sets variables in the various *.in files, most notably llvm/Makefile.config and llvm/include/Config/config.h. It also populates OBJ_ROOT with the Makefiles needed to begin building LLVM.

The following environment variables are used by the configure script to configure the build system:

VariablePurpose
CC Tells configure which C compiler to use. By default, configure will look for the first GCC C compiler in PATH. Use this variable to override configure's default behavior.
CXX Tells configure which C++ compiler to use. By default, configure will look for the first GCC C++ compiler in PATH. Use this variable to override configure's default behavior.

The following options can be used to set or enable LLVM specific options:

--with-llvmgccdir
Path to the LLVM C/C++ FrontEnd to be used with this LLVM configuration. The value of this option should specify the full pathname of the C/C++ Front End to be used. If this option is not provided, the PATH will be searched for a program named llvm-gcc and the C/C++ FrontEnd install directory will be inferred from the path found. If the option is not given, and no llvm-gcc can be found in the path then a warning will be produced by configure indicating this situation. LLVM may still be built with the tools-only target but attempting to build the runtime libraries will fail as these libraries require llvm-gcc and llvm-g++. See Install the GCC Front End for details on installing the C/C++ Front End. See Bootstrapping the LLVM C/C++ Front-End for details on building the C/C++ Front End.
--with-tclinclude
Path to the tcl include directory under which tclsh can be found. Use this if you have multiple tcl installations on your machine and you want to use a specific one (8.x) for LLVM. LLVM only uses tcl for running the dejagnu based test suite in llvm/test. If you don't specify this option, the LLVM configure script will search for the tcl 8.4 and 8.3 releases.

--enable-optimized
Enables optimized compilation by default (debugging symbols are removed and GCC optimization flags are enabled). The default is to use an unoptimized build (also known as a debug build).

--enable-debug-runtime
Enables debug symbols in the runtime libraries. The default is to strip debug symbols from the runtime libraries.
--enable-jit
Compile the Just In Time (JIT) compiler functionality. This is not available on all platforms. The default is dependent on platform, so it is best to explicitly enable it if you want it.

--enable-targets=target-option
Controls which targets will be built and linked into llc. The default value for target_options is "all" which builds and links all available targets. The value "host-only" can be specified to build only a native compiler (no cross-compiler targets available). The "native" target is selected as the target of the build host. You can also specify a comma separated list of target names that you want available in llc. The target names use all lower case. The current set of targets is:
alpha, ia64, powerpc, skeleton, sparc, x86.

--enable-doxygen
Look for the doxygen program and enable construction of doxygen based documentation from the source code. This is disabled by default because generating the documentation can take a long time and producess 100s of megabytes of output.
--with-udis86
LLVM can use external disassembler library for various purposes (now it's used only for examining code produced by JIT). This option will enable usage of udis86 x86 (both 32 and 64 bits) disassembler library.

To configure LLVM, follow these steps:

  1. Change directory into the object root directory:
    cd OBJ_ROOT

  2. Run the configure script located in the LLVM source tree:
    SRC_ROOT/configure --prefix=/install/path [other options]

Compiling the LLVM Suite Source Code

Once you have configured LLVM, you can build it. There are three types of builds:

Debug Builds
These builds are the default when one types gmake (unless the --enable-optimized option was used during configuration). The build system will compile the tools and libraries with debugging information.

Release (Optimized) Builds
These builds are enabled with the --enable-optimized option to configure or by specifying ENABLE_OPTIMIZED=1 on the gmake command line. For these builds, the build system will compile the tools and libraries with GCC optimizations enabled and strip debugging information from the libraries and executables it generates.

Profile Builds
These builds are for use with profiling. They compile profiling information into the code for use with programs like gprof. Profile builds must be started by specifying ENABLE_PROFILING=1 on the gmake command line.

Once you have LLVM configured, you can build it by entering the OBJ_ROOT directory and issuing the following command:

gmake

If the build fails, please check here to see if you are using a version of GCC that is known not to compile LLVM.

If you have multiple processors in your machine, you may wish to use some of the parallel build options provided by GNU Make. For example, you could use the command:

gmake -j2

There are several special targets which are useful when working with the LLVM source code:

gmake clean
Removes all files generated by the build. This includes object files, generated C/C++ files, libraries, and executables.

gmake dist-clean
Removes everything that gmake clean does, but also removes files generated by configure. It attempts to return the source tree to the original state in which it was shipped.

gmake install
Installs LLVM header files, libraries, tools, and documentation in a hierarchy under $PREFIX, specified with ./configure --prefix=[dir], which defaults to /usr/local.

gmake -C runtime install-bytecode
Assuming you built LLVM into $OBJDIR, when this command is run, it will install bytecode libraries into the GCC front end's bytecode library directory. If you need to update your bytecode libraries, this is the target to use once you've built them.

Please see the Makefile Guide for further details on these make targets and descriptions of other targets available.

It is also possible to override default values from configure by declaring variables on the command line. The following are some examples:

gmake ENABLE_OPTIMIZED=1
Perform a Release (Optimized) build.

gmake ENABLE_OPTIMIZED=1 DISABLE_ASSERTIONS=1
Perform a Release (Optimized) build without assertions enabled.

gmake ENABLE_PROFILING=1
Perform a Profiling build.

gmake VERBOSE=1
Print what gmake is doing on standard output.

gmake TOOL_VERBOSE=1
Ask each tool invoked by the makefiles to print out what it is doing on the standard output. This also implies VERBOSE=1.

Every directory in the LLVM object tree includes a Makefile to build it and any subdirectories that it contains. Entering any directory inside the LLVM object tree and typing gmake should rebuild anything in or below that directory that is out of date.

Cross-Compiling LLVM

It is possible to cross-compile LLVM. That is, you can create LLVM executables and libraries for a platform different than the one one which you are compiling. To do this, a few additional steps are required. 1 To cross-compile LLVM, use these instructions:

  1. Configure and build LLVM as a native compiler. You will need just TableGen from that build.
    • If you have $LLVM_OBJ_ROOT=$LLVM_SRC_ROOT just execute make -C utils/TableGen after configuring.
    • Otherwise you will need to monitor building process and terminate it just after TableGen was built.
  2. Copy the TableGen binary to somewhere safe (out of your build tree).
  3. Configure LLVM to build with a cross-compiler. To do this, supply the configure script with --build and --host options that are different. The values of these options must be legal target triples that your GCC compiler supports.
  4. Put the saved TableGen executable into the into $LLVM_OBJ_ROOT/{BUILD_TYPE}/bin directory (e.g. into .../Release/bin for a Release build).
  5. Build LLVM as usual.

The result of such a build will produce executables that are not executable on your build host (--build option) but can be executed on your compile host (--host option).

Notes:

  1. Cross-compiling was tested only with Linux as build platform and Windows as host using mingw32 cross-compiler. Other combinations have not been tested.
The Location of LLVM Object Files

The LLVM build system is capable of sharing a single LLVM source tree among several LLVM builds. Hence, it is possible to build LLVM for several different platforms or configurations using the same source tree.

This is accomplished in the typical autoconf manner:

The LLVM build will place files underneath OBJ_ROOT in directories named after the build type:

Debug Builds
Tools
OBJ_ROOT/Debug/bin
Libraries
OBJ_ROOT/Debug/lib


Release Builds
Tools
OBJ_ROOT/Release/bin
Libraries
OBJ_ROOT/Release/lib


Profile Builds
Tools
OBJ_ROOT/Profile/bin
Libraries
OBJ_ROOT/Profile/lib
Optional Configuration Items

If you're running on a Linux system that supports the " binfmt_misc" module, and you have root access on the system, you can set your system up to execute LLVM bytecode files directly. To do this, use commands like this (the first command may not be required if you are already using the module):

   $ mount -t binfmt_misc none /proc/sys/fs/binfmt_misc
   $ echo ':llvm:M::llvm::/path/to/lli:' > /proc/sys/fs/binfmt_misc/register
   $ chmod u+x hello.bc                (if needed)
   $ ./hello.bc

This allows you to execute LLVM bytecode files directly. Thanks to Jack Cummings for pointing this out!

Program Layout

One useful source of information about the LLVM source base is the LLVM doxygen documentation available at http://llvm.org/doxygen/. The following is a brief introduction to code layout:

CVS directories

Every directory checked out of CVS will contain a CVS directory; for the most part these can just be ignored.

llvm/examples

This directory contains some simple examples of how to use the LLVM IR and JIT.

llvm/include

This directory contains public header files exported from the LLVM library. The three main subdirectories of this directory are:

llvm/include/llvm
This directory contains all of the LLVM specific header files. This directory also has subdirectories for different portions of LLVM: Analysis, CodeGen, Target, Transforms, etc...
llvm/include/llvm/Support
This directory contains generic support libraries that are provided with LLVM but not necessarily specific to LLVM. For example, some C++ STL utilities and a Command Line option processing library store their header files here.
llvm/include/llvm/Config
This directory contains header files configured by the configure script. They wrap "standard" UNIX and C header files. Source code can include these header files which automatically take care of the conditional #includes that the configure script generates.
llvm/lib

This directory contains most of the source files of the LLVM system. In LLVM, almost all code exists in libraries, making it very easy to share code among the different tools.

llvm/lib/VMCore/
This directory holds the core LLVM source files that implement core classes like Instruction and BasicBlock.
llvm/lib/AsmParser/
This directory holds the source code for the LLVM assembly language parser library.
llvm/lib/ByteCode/
This directory holds code for reading and write LLVM bytecode.
llvm/lib/Analysis/
This directory contains a variety of different program analyses, such as Dominator Information, Call Graphs, Induction Variables, Interval Identification, Natural Loop Identification, etc.
llvm/lib/Transforms/
This directory contains the source code for the LLVM to LLVM program transformations, such as Aggressive Dead Code Elimination, Sparse Conditional Constant Propagation, Inlining, Loop Invariant Code Motion, Dead Global Elimination, and many others.
llvm/lib/Target/
This directory contains files that describe various target architectures for code generation. For example, the llvm/lib/Target/X86 directory holds the X86 machine description while llvm/lib/Target/CBackend implements the LLVM-to-C converter.
llvm/lib/CodeGen/
This directory contains the major parts of the code generator: Instruction Selector, Instruction Scheduling, and Register Allocation.
llvm/lib/Debugger/
This directory contains the source level debugger library that makes it possible to instrument LLVM programs so that a debugger could identify source code locations at which the program is executing.
llvm/lib/ExecutionEngine/
This directory contains libraries for executing LLVM bytecode directly at runtime in both interpreted and JIT compiled fashions.
llvm/lib/Support/
This directory contains the source code that corresponds to the header files located in llvm/include/Support/.
llvm/lib/System/
This directory contains the operating system abstraction layer that shields LLVM from platform-specific coding.
llvm/projects

This directory contains projects that are not strictly part of LLVM but are shipped with LLVM. This is also the directory where you should create your own LLVM-based projects. See llvm/projects/sample for an example of how to set up your own project. See llvm/projects/Stacker for a fully functional example of a compiler front end.

llvm/runtime

This directory contains libraries which are compiled into LLVM bytecode and used when linking programs with the GCC front end. Most of these libraries are skeleton versions of real libraries; for example, libc is a stripped down version of glibc.

Unlike the rest of the LLVM suite, this directory needs the LLVM GCC front end to compile.

llvm/test

This directory contains feature and regression tests and other basic sanity checks on the LLVM infrastructure. These are intended to run quickly and cover a lot of territory without being exhaustive.

llvm-test

This is not a directory in the normal llvm module; it is a separate CVS module that must be checked out (usually to projects/llvm-test). This module contains a comprehensive correctness, performance, and benchmarking test suite for LLVM. It is a separate CVS module because not every LLVM user is interested in downloading or building such a comprehensive test suite. For further details on this test suite, please see the Testing Guide document.

llvm/tools

The tools directory contains the executables built out of the libraries above, which form the main part of the user interface. You can always get help for a tool by typing tool_name --help. The following is a brief introduction to the most important tools. More detailed information is in the Command Guide.

bugpoint
bugpoint is used to debug optimization passes or code generation backends by narrowing down the given test case to the minimum number of passes and/or instructions that still cause a problem, whether it is a crash or miscompilation. See HowToSubmitABug.html for more information on using bugpoint.
llvmc
The LLVM Compiler Driver. This program can be configured to utilize both LLVM and non-LLVM compilation tools to enable pre-processing, translation, optimization, assembly, and linking of programs all from one command line. llvmc also takes care of processing the dependent libraries found in bytecode. This reduces the need to get the traditional -l<name> options right on the command line. Please note that this tool, while functional, is still experimental and not feature complete.
llvm-ar
The archiver produces an archive containing the given LLVM bytecode files, optionally with an index for faster lookup.
llvm-as
The assembler transforms the human readable LLVM assembly to LLVM bytecode.
llvm-dis
The disassembler transforms the LLVM bytecode to human readable LLVM assembly.
llvm-ld
llvm-ld is very similar to gccld and provides a general purpose and extensible linker for LLVM. This is the linker invoked by llvmc. It allows optimization modules to be loaded so that language specific optimizations can be applied at link time. This tool is considered experimental.
llvm-link
llvm-link, not surprisingly, links multiple LLVM modules into a single program.
lli
lli is the LLVM interpreter, which can directly execute LLVM bytecode (although very slowly...). In addition to a simple interpreter, lli also has a tracing mode (entered by specifying -trace on the command line). Finally, for architectures that support it (currently x86, Sparc, and PowerPC), by default, lli will function as a Just-In-Time compiler (if the functionality was compiled in), and will execute the code much faster than the interpreter.
llc
llc is the LLVM backend compiler, which translates LLVM bytecode to a native code assembly file or to C code (with the -march=c option).
llvm-gcc
llvm-gcc is a GCC-based C frontend that has been retargeted to emit LLVM code as the machine code output. It works just like any other GCC compiler, taking the typical -c, -S, -E, -o options that are typically used. The source code for the llvm-gcc tool is available as a separate CVS module.
gccas
This tool is invoked by the llvm-gcc frontend as the "assembler" part of the compiler. This tool actually assembles LLVM assembly to LLVM bytecode, performs a variety of optimizations, and outputs LLVM bytecode. Thus when you invoke llvm-gcc -c x.c -o x.o, you are causing gccas to be run, which writes the x.o file (which is an LLVM bytecode file that can be disassembled or manipulated just like any other bytecode file). The command line interface to gccas is designed to be as close as possible to the system `as' utility so that the gcc frontend itself did not have to be modified to interface to a "weird" assembler.
gccld
gccld links together several LLVM bytecode files into one bytecode file and does some optimization. It is the linker invoked by the GCC frontend when multiple .o files need to be linked together. Like gccas, the command line interface of gccld is designed to match the system linker, to aid interfacing with the GCC frontend.
opt
opt reads LLVM bytecode, applies a series of LLVM to LLVM transformations (which are specified on the command line), and then outputs the resultant bytecode. The 'opt --help' command is a good way to get a list of the program transformations available in LLVM.
opt can also be used to run a specific analysis on an input LLVM bytecode file and print out the results. It is primarily useful for debugging analyses, or familiarizing yourself with what an analysis does.
llvm/utils

This directory contains utilities for working with LLVM source code, and some of the utilities are actually required as part of the build process because they are code generators for parts of LLVM infrastructure.

codegen-diff
codegen-diff is a script that finds differences between code that LLC generates and code that LLI generates. This is a useful tool if you are debugging one of them, assuming that the other generates correct output. For the full user manual, run `perldoc codegen-diff'.

cvsupdate
cvsupdate is a script that will update your CVS tree, but produce a much cleaner and more organized output than simply running `cvs -z3 up -dP' will. For example, it will group together all the new and updated files and modified files in separate sections, so you can see at a glance what has changed. If you are at the top of your LLVM CVS tree, running utils/cvsupdate is the preferred way of updating the tree.

emacs/
The emacs directory contains syntax-highlighting files which will work with Emacs and XEmacs editors, providing syntax highlighting support for LLVM assembly files and TableGen description files. For information on how to use the syntax files, consult the README file in that directory.

getsrcs.sh
The getsrcs.sh script finds and outputs all non-generated source files, which is useful if one wishes to do a lot of development across directories and does not want to individually find each file. One way to use it is to run, for example: xemacs `utils/getsources.sh` from the top of your LLVM source tree.

llvmgrep
This little tool performs an "egrep -H -n" on each source file in LLVM and passes to it a regular expression provided on llvmgrep's command line. This is a very efficient way of searching the source base for a particular regular expression.
makellvm
The makellvm script compiles all files in the current directory and then compiles and links the tool that is the first argument. For example, assuming you are in the directory llvm/lib/Target/Sparc, if makellvm is in your path, simply running makellvm llc will make a build of the current directory, switch to directory llvm/tools/llc and build it, causing a re-linking of LLC.

NightlyTest.pl and NightlyTestTemplate.html
These files are used in a cron script to generate nightly status reports of the functionality of tools, and the results can be seen by following the appropriate link on the LLVM homepage.

TableGen/
The TableGen directory contains the tool used to generate register descriptions, instruction set descriptions, and even assemblers from common TableGen description files.

vim/
The vim directory contains syntax-highlighting files which will work with the VIM editor, providing syntax highlighting support for LLVM assembly files and TableGen description files. For information on how to use the syntax files, consult the README file in that directory.

llvm/win32

This directory contains build scripts and project files for use with Visual C++. This allows developers on Windows to build LLVM without the need for Cygwin. The contents of this directory should be considered experimental at this time.

An Example Using the LLVM Tool Chain

This section gives an example of using LLVM. llvm-gcc3 is now obsolete, so we only include instructiosn for llvm-gcc4.

Note: The gcc4 frontend's invocation is considerably different from the previous gcc3 frontend. In particular, the gcc4 frontend does not create bytecode by default: gcc4 produces native code. As the example below illustrates, the '--emit-llvm' flag is needed to produce LLVM bytecode output. For makefiles and configure scripts, the CFLAGS variable needs '--emit-llvm' to produce bytecode output.

Example with llvm-gcc4
  1. First, create a simple C file, name it 'hello.c':
       #include <stdio.h>
       int main() {
         printf("hello world\n");
         return 0;
       }
           
  2. Next, compile the C file into a native executable:

    % llvm-gcc hello.c -o hello

    Note that llvm-gcc works just like GCC by default. The standard -S and -c arguments work as usual (producing a native .s or .o file, respectively).

  3. Next, compile the C file into a LLVM bytecode file:

    % llvm-gcc -O3 -emit-llvm hello.c -c -o hello.bc

    The -emit-llvm option can be used with the -S or -c options to emit an LLVM ".ll" or ".bc" file (respectively) for the code. This allows you to use the standard LLVM tools on the bytecode file.

    Unlike llvm-gcc3, llvm-gcc4 correctly responds to -O[0123] arguments.

  4. Run the program in both forms. To run the program, use:

    % ./hello

    and

    % lli hello.bc

    The second examples shows how to invoke the LLVM JIT, lli.

  5. Use the llvm-dis utility to take a look at the LLVM assembly code:

    % llvm-dis < hello.bc | less

  6. Compile the program to native assembly using the LLC code generator:

    % llc hello.bc -o hello.s

  7. Assemble the native assembly language file into a program:

    Solaris:% /opt/SUNWspro/bin/cc -xarch=v9 hello.s -o hello.native

    Others:% gcc hello.s -o hello.native

  8. Execute the native code program:

    % ./hello.native

    Note that using llvm-gcc to compile directly to native code (i.e. when the -emit-llvm option is not present) does steps 6/7/8 for you.

Common Problems

If you are having problems building or using LLVM, or if you have any other general questions about LLVM, please consult the Frequently Asked Questions page.

Links

This document is just an introduction to how to use LLVM to do some simple things... there are many more interesting and complicated things that you can do that aren't documented here (but we'll gladly accept a patch if you want to write something up!). For more information about LLVM, check out:


Valid CSS! Valid HTML 4.01! Chris Lattner
Reid Spencer
The LLVM Compiler Infrastructure
Last modified: $Date$