Introduce a helper to combine instruction metadata.
[oota-llvm.git] / lib / Transforms / Scalar / GVN.cpp
1 //===- GVN.cpp - Eliminate redundant values and loads ---------------------===//
2 //
3 //                     The LLVM Compiler Infrastructure
4 //
5 // This file is distributed under the University of Illinois Open Source
6 // License. See LICENSE.TXT for details.
7 //
8 //===----------------------------------------------------------------------===//
9 //
10 // This pass performs global value numbering to eliminate fully redundant
11 // instructions.  It also performs simple dead load elimination.
12 //
13 // Note that this pass does the value numbering itself; it does not use the
14 // ValueNumbering analysis passes.
15 //
16 //===----------------------------------------------------------------------===//
17
18 #include "llvm/Transforms/Scalar.h"
19 #include "llvm/ADT/DenseMap.h"
20 #include "llvm/ADT/DepthFirstIterator.h"
21 #include "llvm/ADT/Hashing.h"
22 #include "llvm/ADT/MapVector.h"
23 #include "llvm/ADT/SetVector.h"
24 #include "llvm/ADT/SmallPtrSet.h"
25 #include "llvm/ADT/Statistic.h"
26 #include "llvm/Analysis/AliasAnalysis.h"
27 #include "llvm/Analysis/CFG.h"
28 #include "llvm/Analysis/ConstantFolding.h"
29 #include "llvm/Analysis/InstructionSimplify.h"
30 #include "llvm/Analysis/Loads.h"
31 #include "llvm/Analysis/MemoryBuiltins.h"
32 #include "llvm/Analysis/MemoryDependenceAnalysis.h"
33 #include "llvm/Analysis/PHITransAddr.h"
34 #include "llvm/Analysis/ValueTracking.h"
35 #include "llvm/IR/DataLayout.h"
36 #include "llvm/IR/Dominators.h"
37 #include "llvm/IR/GlobalVariable.h"
38 #include "llvm/IR/IRBuilder.h"
39 #include "llvm/IR/IntrinsicInst.h"
40 #include "llvm/IR/LLVMContext.h"
41 #include "llvm/IR/Metadata.h"
42 #include "llvm/IR/PatternMatch.h"
43 #include "llvm/Support/Allocator.h"
44 #include "llvm/Support/CommandLine.h"
45 #include "llvm/Support/Debug.h"
46 #include "llvm/Target/TargetLibraryInfo.h"
47 #include "llvm/Transforms/Utils/BasicBlockUtils.h"
48 #include "llvm/Transforms/Utils/Local.h"
49 #include "llvm/Transforms/Utils/SSAUpdater.h"
50 #include <vector>
51 using namespace llvm;
52 using namespace PatternMatch;
53
54 #define DEBUG_TYPE "gvn"
55
56 STATISTIC(NumGVNInstr,  "Number of instructions deleted");
57 STATISTIC(NumGVNLoad,   "Number of loads deleted");
58 STATISTIC(NumGVNPRE,    "Number of instructions PRE'd");
59 STATISTIC(NumGVNBlocks, "Number of blocks merged");
60 STATISTIC(NumGVNSimpl,  "Number of instructions simplified");
61 STATISTIC(NumGVNEqProp, "Number of equalities propagated");
62 STATISTIC(NumPRELoad,   "Number of loads PRE'd");
63
64 static cl::opt<bool> EnablePRE("enable-pre",
65                                cl::init(true), cl::Hidden);
66 static cl::opt<bool> EnableLoadPRE("enable-load-pre", cl::init(true));
67
68 // Maximum allowed recursion depth.
69 static cl::opt<uint32_t>
70 MaxRecurseDepth("max-recurse-depth", cl::Hidden, cl::init(1000), cl::ZeroOrMore,
71                 cl::desc("Max recurse depth (default = 1000)"));
72
73 //===----------------------------------------------------------------------===//
74 //                         ValueTable Class
75 //===----------------------------------------------------------------------===//
76
77 /// This class holds the mapping between values and value numbers.  It is used
78 /// as an efficient mechanism to determine the expression-wise equivalence of
79 /// two values.
80 namespace {
81   struct Expression {
82     uint32_t opcode;
83     Type *type;
84     SmallVector<uint32_t, 4> varargs;
85
86     Expression(uint32_t o = ~2U) : opcode(o) { }
87
88     bool operator==(const Expression &other) const {
89       if (opcode != other.opcode)
90         return false;
91       if (opcode == ~0U || opcode == ~1U)
92         return true;
93       if (type != other.type)
94         return false;
95       if (varargs != other.varargs)
96         return false;
97       return true;
98     }
99
100     friend hash_code hash_value(const Expression &Value) {
101       return hash_combine(Value.opcode, Value.type,
102                           hash_combine_range(Value.varargs.begin(),
103                                              Value.varargs.end()));
104     }
105   };
106
107   class ValueTable {
108     DenseMap<Value*, uint32_t> valueNumbering;
109     DenseMap<Expression, uint32_t> expressionNumbering;
110     AliasAnalysis *AA;
111     MemoryDependenceAnalysis *MD;
112     DominatorTree *DT;
113
114     uint32_t nextValueNumber;
115
116     Expression create_expression(Instruction* I);
117     Expression create_cmp_expression(unsigned Opcode,
118                                      CmpInst::Predicate Predicate,
119                                      Value *LHS, Value *RHS);
120     Expression create_extractvalue_expression(ExtractValueInst* EI);
121     uint32_t lookup_or_add_call(CallInst* C);
122   public:
123     ValueTable() : nextValueNumber(1) { }
124     uint32_t lookup_or_add(Value *V);
125     uint32_t lookup(Value *V) const;
126     uint32_t lookup_or_add_cmp(unsigned Opcode, CmpInst::Predicate Pred,
127                                Value *LHS, Value *RHS);
128     void add(Value *V, uint32_t num);
129     void clear();
130     void erase(Value *v);
131     void setAliasAnalysis(AliasAnalysis* A) { AA = A; }
132     AliasAnalysis *getAliasAnalysis() const { return AA; }
133     void setMemDep(MemoryDependenceAnalysis* M) { MD = M; }
134     void setDomTree(DominatorTree* D) { DT = D; }
135     uint32_t getNextUnusedValueNumber() { return nextValueNumber; }
136     void verifyRemoved(const Value *) const;
137   };
138 }
139
140 namespace llvm {
141 template <> struct DenseMapInfo<Expression> {
142   static inline Expression getEmptyKey() {
143     return ~0U;
144   }
145
146   static inline Expression getTombstoneKey() {
147     return ~1U;
148   }
149
150   static unsigned getHashValue(const Expression e) {
151     using llvm::hash_value;
152     return static_cast<unsigned>(hash_value(e));
153   }
154   static bool isEqual(const Expression &LHS, const Expression &RHS) {
155     return LHS == RHS;
156   }
157 };
158
159 }
160
161 //===----------------------------------------------------------------------===//
162 //                     ValueTable Internal Functions
163 //===----------------------------------------------------------------------===//
164
165 Expression ValueTable::create_expression(Instruction *I) {
166   Expression e;
167   e.type = I->getType();
168   e.opcode = I->getOpcode();
169   for (Instruction::op_iterator OI = I->op_begin(), OE = I->op_end();
170        OI != OE; ++OI)
171     e.varargs.push_back(lookup_or_add(*OI));
172   if (I->isCommutative()) {
173     // Ensure that commutative instructions that only differ by a permutation
174     // of their operands get the same value number by sorting the operand value
175     // numbers.  Since all commutative instructions have two operands it is more
176     // efficient to sort by hand rather than using, say, std::sort.
177     assert(I->getNumOperands() == 2 && "Unsupported commutative instruction!");
178     if (e.varargs[0] > e.varargs[1])
179       std::swap(e.varargs[0], e.varargs[1]);
180   }
181
182   if (CmpInst *C = dyn_cast<CmpInst>(I)) {
183     // Sort the operand value numbers so x<y and y>x get the same value number.
184     CmpInst::Predicate Predicate = C->getPredicate();
185     if (e.varargs[0] > e.varargs[1]) {
186       std::swap(e.varargs[0], e.varargs[1]);
187       Predicate = CmpInst::getSwappedPredicate(Predicate);
188     }
189     e.opcode = (C->getOpcode() << 8) | Predicate;
190   } else if (InsertValueInst *E = dyn_cast<InsertValueInst>(I)) {
191     for (InsertValueInst::idx_iterator II = E->idx_begin(), IE = E->idx_end();
192          II != IE; ++II)
193       e.varargs.push_back(*II);
194   }
195
196   return e;
197 }
198
199 Expression ValueTable::create_cmp_expression(unsigned Opcode,
200                                              CmpInst::Predicate Predicate,
201                                              Value *LHS, Value *RHS) {
202   assert((Opcode == Instruction::ICmp || Opcode == Instruction::FCmp) &&
203          "Not a comparison!");
204   Expression e;
205   e.type = CmpInst::makeCmpResultType(LHS->getType());
206   e.varargs.push_back(lookup_or_add(LHS));
207   e.varargs.push_back(lookup_or_add(RHS));
208
209   // Sort the operand value numbers so x<y and y>x get the same value number.
210   if (e.varargs[0] > e.varargs[1]) {
211     std::swap(e.varargs[0], e.varargs[1]);
212     Predicate = CmpInst::getSwappedPredicate(Predicate);
213   }
214   e.opcode = (Opcode << 8) | Predicate;
215   return e;
216 }
217
218 Expression ValueTable::create_extractvalue_expression(ExtractValueInst *EI) {
219   assert(EI && "Not an ExtractValueInst?");
220   Expression e;
221   e.type = EI->getType();
222   e.opcode = 0;
223
224   IntrinsicInst *I = dyn_cast<IntrinsicInst>(EI->getAggregateOperand());
225   if (I != nullptr && EI->getNumIndices() == 1 && *EI->idx_begin() == 0 ) {
226     // EI might be an extract from one of our recognised intrinsics. If it
227     // is we'll synthesize a semantically equivalent expression instead on
228     // an extract value expression.
229     switch (I->getIntrinsicID()) {
230       case Intrinsic::sadd_with_overflow:
231       case Intrinsic::uadd_with_overflow:
232         e.opcode = Instruction::Add;
233         break;
234       case Intrinsic::ssub_with_overflow:
235       case Intrinsic::usub_with_overflow:
236         e.opcode = Instruction::Sub;
237         break;
238       case Intrinsic::smul_with_overflow:
239       case Intrinsic::umul_with_overflow:
240         e.opcode = Instruction::Mul;
241         break;
242       default:
243         break;
244     }
245
246     if (e.opcode != 0) {
247       // Intrinsic recognized. Grab its args to finish building the expression.
248       assert(I->getNumArgOperands() == 2 &&
249              "Expect two args for recognised intrinsics.");
250       e.varargs.push_back(lookup_or_add(I->getArgOperand(0)));
251       e.varargs.push_back(lookup_or_add(I->getArgOperand(1)));
252       return e;
253     }
254   }
255
256   // Not a recognised intrinsic. Fall back to producing an extract value
257   // expression.
258   e.opcode = EI->getOpcode();
259   for (Instruction::op_iterator OI = EI->op_begin(), OE = EI->op_end();
260        OI != OE; ++OI)
261     e.varargs.push_back(lookup_or_add(*OI));
262
263   for (ExtractValueInst::idx_iterator II = EI->idx_begin(), IE = EI->idx_end();
264          II != IE; ++II)
265     e.varargs.push_back(*II);
266
267   return e;
268 }
269
270 //===----------------------------------------------------------------------===//
271 //                     ValueTable External Functions
272 //===----------------------------------------------------------------------===//
273
274 /// add - Insert a value into the table with a specified value number.
275 void ValueTable::add(Value *V, uint32_t num) {
276   valueNumbering.insert(std::make_pair(V, num));
277 }
278
279 uint32_t ValueTable::lookup_or_add_call(CallInst *C) {
280   if (AA->doesNotAccessMemory(C)) {
281     Expression exp = create_expression(C);
282     uint32_t &e = expressionNumbering[exp];
283     if (!e) e = nextValueNumber++;
284     valueNumbering[C] = e;
285     return e;
286   } else if (AA->onlyReadsMemory(C)) {
287     Expression exp = create_expression(C);
288     uint32_t &e = expressionNumbering[exp];
289     if (!e) {
290       e = nextValueNumber++;
291       valueNumbering[C] = e;
292       return e;
293     }
294     if (!MD) {
295       e = nextValueNumber++;
296       valueNumbering[C] = e;
297       return e;
298     }
299
300     MemDepResult local_dep = MD->getDependency(C);
301
302     if (!local_dep.isDef() && !local_dep.isNonLocal()) {
303       valueNumbering[C] =  nextValueNumber;
304       return nextValueNumber++;
305     }
306
307     if (local_dep.isDef()) {
308       CallInst* local_cdep = cast<CallInst>(local_dep.getInst());
309
310       if (local_cdep->getNumArgOperands() != C->getNumArgOperands()) {
311         valueNumbering[C] = nextValueNumber;
312         return nextValueNumber++;
313       }
314
315       for (unsigned i = 0, e = C->getNumArgOperands(); i < e; ++i) {
316         uint32_t c_vn = lookup_or_add(C->getArgOperand(i));
317         uint32_t cd_vn = lookup_or_add(local_cdep->getArgOperand(i));
318         if (c_vn != cd_vn) {
319           valueNumbering[C] = nextValueNumber;
320           return nextValueNumber++;
321         }
322       }
323
324       uint32_t v = lookup_or_add(local_cdep);
325       valueNumbering[C] = v;
326       return v;
327     }
328
329     // Non-local case.
330     const MemoryDependenceAnalysis::NonLocalDepInfo &deps =
331       MD->getNonLocalCallDependency(CallSite(C));
332     // FIXME: Move the checking logic to MemDep!
333     CallInst* cdep = nullptr;
334
335     // Check to see if we have a single dominating call instruction that is
336     // identical to C.
337     for (unsigned i = 0, e = deps.size(); i != e; ++i) {
338       const NonLocalDepEntry *I = &deps[i];
339       if (I->getResult().isNonLocal())
340         continue;
341
342       // We don't handle non-definitions.  If we already have a call, reject
343       // instruction dependencies.
344       if (!I->getResult().isDef() || cdep != nullptr) {
345         cdep = nullptr;
346         break;
347       }
348
349       CallInst *NonLocalDepCall = dyn_cast<CallInst>(I->getResult().getInst());
350       // FIXME: All duplicated with non-local case.
351       if (NonLocalDepCall && DT->properlyDominates(I->getBB(), C->getParent())){
352         cdep = NonLocalDepCall;
353         continue;
354       }
355
356       cdep = nullptr;
357       break;
358     }
359
360     if (!cdep) {
361       valueNumbering[C] = nextValueNumber;
362       return nextValueNumber++;
363     }
364
365     if (cdep->getNumArgOperands() != C->getNumArgOperands()) {
366       valueNumbering[C] = nextValueNumber;
367       return nextValueNumber++;
368     }
369     for (unsigned i = 0, e = C->getNumArgOperands(); i < e; ++i) {
370       uint32_t c_vn = lookup_or_add(C->getArgOperand(i));
371       uint32_t cd_vn = lookup_or_add(cdep->getArgOperand(i));
372       if (c_vn != cd_vn) {
373         valueNumbering[C] = nextValueNumber;
374         return nextValueNumber++;
375       }
376     }
377
378     uint32_t v = lookup_or_add(cdep);
379     valueNumbering[C] = v;
380     return v;
381
382   } else {
383     valueNumbering[C] = nextValueNumber;
384     return nextValueNumber++;
385   }
386 }
387
388 /// lookup_or_add - Returns the value number for the specified value, assigning
389 /// it a new number if it did not have one before.
390 uint32_t ValueTable::lookup_or_add(Value *V) {
391   DenseMap<Value*, uint32_t>::iterator VI = valueNumbering.find(V);
392   if (VI != valueNumbering.end())
393     return VI->second;
394
395   if (!isa<Instruction>(V)) {
396     valueNumbering[V] = nextValueNumber;
397     return nextValueNumber++;
398   }
399
400   Instruction* I = cast<Instruction>(V);
401   Expression exp;
402   switch (I->getOpcode()) {
403     case Instruction::Call:
404       return lookup_or_add_call(cast<CallInst>(I));
405     case Instruction::Add:
406     case Instruction::FAdd:
407     case Instruction::Sub:
408     case Instruction::FSub:
409     case Instruction::Mul:
410     case Instruction::FMul:
411     case Instruction::UDiv:
412     case Instruction::SDiv:
413     case Instruction::FDiv:
414     case Instruction::URem:
415     case Instruction::SRem:
416     case Instruction::FRem:
417     case Instruction::Shl:
418     case Instruction::LShr:
419     case Instruction::AShr:
420     case Instruction::And:
421     case Instruction::Or:
422     case Instruction::Xor:
423     case Instruction::ICmp:
424     case Instruction::FCmp:
425     case Instruction::Trunc:
426     case Instruction::ZExt:
427     case Instruction::SExt:
428     case Instruction::FPToUI:
429     case Instruction::FPToSI:
430     case Instruction::UIToFP:
431     case Instruction::SIToFP:
432     case Instruction::FPTrunc:
433     case Instruction::FPExt:
434     case Instruction::PtrToInt:
435     case Instruction::IntToPtr:
436     case Instruction::BitCast:
437     case Instruction::Select:
438     case Instruction::ExtractElement:
439     case Instruction::InsertElement:
440     case Instruction::ShuffleVector:
441     case Instruction::InsertValue:
442     case Instruction::GetElementPtr:
443       exp = create_expression(I);
444       break;
445     case Instruction::ExtractValue:
446       exp = create_extractvalue_expression(cast<ExtractValueInst>(I));
447       break;
448     default:
449       valueNumbering[V] = nextValueNumber;
450       return nextValueNumber++;
451   }
452
453   uint32_t& e = expressionNumbering[exp];
454   if (!e) e = nextValueNumber++;
455   valueNumbering[V] = e;
456   return e;
457 }
458
459 /// lookup - Returns the value number of the specified value. Fails if
460 /// the value has not yet been numbered.
461 uint32_t ValueTable::lookup(Value *V) const {
462   DenseMap<Value*, uint32_t>::const_iterator VI = valueNumbering.find(V);
463   assert(VI != valueNumbering.end() && "Value not numbered?");
464   return VI->second;
465 }
466
467 /// lookup_or_add_cmp - Returns the value number of the given comparison,
468 /// assigning it a new number if it did not have one before.  Useful when
469 /// we deduced the result of a comparison, but don't immediately have an
470 /// instruction realizing that comparison to hand.
471 uint32_t ValueTable::lookup_or_add_cmp(unsigned Opcode,
472                                        CmpInst::Predicate Predicate,
473                                        Value *LHS, Value *RHS) {
474   Expression exp = create_cmp_expression(Opcode, Predicate, LHS, RHS);
475   uint32_t& e = expressionNumbering[exp];
476   if (!e) e = nextValueNumber++;
477   return e;
478 }
479
480 /// clear - Remove all entries from the ValueTable.
481 void ValueTable::clear() {
482   valueNumbering.clear();
483   expressionNumbering.clear();
484   nextValueNumber = 1;
485 }
486
487 /// erase - Remove a value from the value numbering.
488 void ValueTable::erase(Value *V) {
489   valueNumbering.erase(V);
490 }
491
492 /// verifyRemoved - Verify that the value is removed from all internal data
493 /// structures.
494 void ValueTable::verifyRemoved(const Value *V) const {
495   for (DenseMap<Value*, uint32_t>::const_iterator
496          I = valueNumbering.begin(), E = valueNumbering.end(); I != E; ++I) {
497     assert(I->first != V && "Inst still occurs in value numbering map!");
498   }
499 }
500
501 //===----------------------------------------------------------------------===//
502 //                                GVN Pass
503 //===----------------------------------------------------------------------===//
504
505 namespace {
506   class GVN;
507   struct AvailableValueInBlock {
508     /// BB - The basic block in question.
509     BasicBlock *BB;
510     enum ValType {
511       SimpleVal,  // A simple offsetted value that is accessed.
512       LoadVal,    // A value produced by a load.
513       MemIntrin,  // A memory intrinsic which is loaded from.
514       UndefVal    // A UndefValue representing a value from dead block (which
515                   // is not yet physically removed from the CFG). 
516     };
517   
518     /// V - The value that is live out of the block.
519     PointerIntPair<Value *, 2, ValType> Val;
520   
521     /// Offset - The byte offset in Val that is interesting for the load query.
522     unsigned Offset;
523   
524     static AvailableValueInBlock get(BasicBlock *BB, Value *V,
525                                      unsigned Offset = 0) {
526       AvailableValueInBlock Res;
527       Res.BB = BB;
528       Res.Val.setPointer(V);
529       Res.Val.setInt(SimpleVal);
530       Res.Offset = Offset;
531       return Res;
532     }
533   
534     static AvailableValueInBlock getMI(BasicBlock *BB, MemIntrinsic *MI,
535                                        unsigned Offset = 0) {
536       AvailableValueInBlock Res;
537       Res.BB = BB;
538       Res.Val.setPointer(MI);
539       Res.Val.setInt(MemIntrin);
540       Res.Offset = Offset;
541       return Res;
542     }
543   
544     static AvailableValueInBlock getLoad(BasicBlock *BB, LoadInst *LI,
545                                          unsigned Offset = 0) {
546       AvailableValueInBlock Res;
547       Res.BB = BB;
548       Res.Val.setPointer(LI);
549       Res.Val.setInt(LoadVal);
550       Res.Offset = Offset;
551       return Res;
552     }
553
554     static AvailableValueInBlock getUndef(BasicBlock *BB) {
555       AvailableValueInBlock Res;
556       Res.BB = BB;
557       Res.Val.setPointer(nullptr);
558       Res.Val.setInt(UndefVal);
559       Res.Offset = 0;
560       return Res;
561     }
562
563     bool isSimpleValue() const { return Val.getInt() == SimpleVal; }
564     bool isCoercedLoadValue() const { return Val.getInt() == LoadVal; }
565     bool isMemIntrinValue() const { return Val.getInt() == MemIntrin; }
566     bool isUndefValue() const { return Val.getInt() == UndefVal; }
567   
568     Value *getSimpleValue() const {
569       assert(isSimpleValue() && "Wrong accessor");
570       return Val.getPointer();
571     }
572   
573     LoadInst *getCoercedLoadValue() const {
574       assert(isCoercedLoadValue() && "Wrong accessor");
575       return cast<LoadInst>(Val.getPointer());
576     }
577   
578     MemIntrinsic *getMemIntrinValue() const {
579       assert(isMemIntrinValue() && "Wrong accessor");
580       return cast<MemIntrinsic>(Val.getPointer());
581     }
582   
583     /// MaterializeAdjustedValue - Emit code into this block to adjust the value
584     /// defined here to the specified type.  This handles various coercion cases.
585     Value *MaterializeAdjustedValue(Type *LoadTy, GVN &gvn) const;
586   };
587
588   class GVN : public FunctionPass {
589     bool NoLoads;
590     MemoryDependenceAnalysis *MD;
591     DominatorTree *DT;
592     const DataLayout *DL;
593     const TargetLibraryInfo *TLI;
594     SetVector<BasicBlock *> DeadBlocks;
595
596     ValueTable VN;
597
598     /// LeaderTable - A mapping from value numbers to lists of Value*'s that
599     /// have that value number.  Use findLeader to query it.
600     struct LeaderTableEntry {
601       Value *Val;
602       const BasicBlock *BB;
603       LeaderTableEntry *Next;
604     };
605     DenseMap<uint32_t, LeaderTableEntry> LeaderTable;
606     BumpPtrAllocator TableAllocator;
607
608     SmallVector<Instruction*, 8> InstrsToErase;
609
610     typedef SmallVector<NonLocalDepResult, 64> LoadDepVect;
611     typedef SmallVector<AvailableValueInBlock, 64> AvailValInBlkVect;
612     typedef SmallVector<BasicBlock*, 64> UnavailBlkVect;
613
614   public:
615     static char ID; // Pass identification, replacement for typeid
616     explicit GVN(bool noloads = false)
617         : FunctionPass(ID), NoLoads(noloads), MD(nullptr) {
618       initializeGVNPass(*PassRegistry::getPassRegistry());
619     }
620
621     bool runOnFunction(Function &F) override;
622
623     /// markInstructionForDeletion - This removes the specified instruction from
624     /// our various maps and marks it for deletion.
625     void markInstructionForDeletion(Instruction *I) {
626       VN.erase(I);
627       InstrsToErase.push_back(I);
628     }
629
630     const DataLayout *getDataLayout() const { return DL; }
631     DominatorTree &getDominatorTree() const { return *DT; }
632     AliasAnalysis *getAliasAnalysis() const { return VN.getAliasAnalysis(); }
633     MemoryDependenceAnalysis &getMemDep() const { return *MD; }
634   private:
635     /// addToLeaderTable - Push a new Value to the LeaderTable onto the list for
636     /// its value number.
637     void addToLeaderTable(uint32_t N, Value *V, const BasicBlock *BB) {
638       LeaderTableEntry &Curr = LeaderTable[N];
639       if (!Curr.Val) {
640         Curr.Val = V;
641         Curr.BB = BB;
642         return;
643       }
644
645       LeaderTableEntry *Node = TableAllocator.Allocate<LeaderTableEntry>();
646       Node->Val = V;
647       Node->BB = BB;
648       Node->Next = Curr.Next;
649       Curr.Next = Node;
650     }
651
652     /// removeFromLeaderTable - Scan the list of values corresponding to a given
653     /// value number, and remove the given instruction if encountered.
654     void removeFromLeaderTable(uint32_t N, Instruction *I, BasicBlock *BB) {
655       LeaderTableEntry* Prev = nullptr;
656       LeaderTableEntry* Curr = &LeaderTable[N];
657
658       while (Curr->Val != I || Curr->BB != BB) {
659         Prev = Curr;
660         Curr = Curr->Next;
661       }
662
663       if (Prev) {
664         Prev->Next = Curr->Next;
665       } else {
666         if (!Curr->Next) {
667           Curr->Val = nullptr;
668           Curr->BB = nullptr;
669         } else {
670           LeaderTableEntry* Next = Curr->Next;
671           Curr->Val = Next->Val;
672           Curr->BB = Next->BB;
673           Curr->Next = Next->Next;
674         }
675       }
676     }
677
678     // List of critical edges to be split between iterations.
679     SmallVector<std::pair<TerminatorInst*, unsigned>, 4> toSplit;
680
681     // This transformation requires dominator postdominator info
682     void getAnalysisUsage(AnalysisUsage &AU) const override {
683       AU.addRequired<DominatorTreeWrapperPass>();
684       AU.addRequired<TargetLibraryInfo>();
685       if (!NoLoads)
686         AU.addRequired<MemoryDependenceAnalysis>();
687       AU.addRequired<AliasAnalysis>();
688
689       AU.addPreserved<DominatorTreeWrapperPass>();
690       AU.addPreserved<AliasAnalysis>();
691     }
692
693
694     // Helper fuctions of redundant load elimination 
695     bool processLoad(LoadInst *L);
696     bool processNonLocalLoad(LoadInst *L);
697     void AnalyzeLoadAvailability(LoadInst *LI, LoadDepVect &Deps, 
698                                  AvailValInBlkVect &ValuesPerBlock,
699                                  UnavailBlkVect &UnavailableBlocks);
700     bool PerformLoadPRE(LoadInst *LI, AvailValInBlkVect &ValuesPerBlock, 
701                         UnavailBlkVect &UnavailableBlocks);
702
703     // Other helper routines
704     bool processInstruction(Instruction *I);
705     bool processBlock(BasicBlock *BB);
706     void dump(DenseMap<uint32_t, Value*> &d);
707     bool iterateOnFunction(Function &F);
708     bool performPRE(Function &F);
709     Value *findLeader(const BasicBlock *BB, uint32_t num);
710     void cleanupGlobalSets();
711     void verifyRemoved(const Instruction *I) const;
712     bool splitCriticalEdges();
713     BasicBlock *splitCriticalEdges(BasicBlock *Pred, BasicBlock *Succ);
714     unsigned replaceAllDominatedUsesWith(Value *From, Value *To,
715                                          const BasicBlockEdge &Root);
716     bool propagateEquality(Value *LHS, Value *RHS, const BasicBlockEdge &Root);
717     bool processFoldableCondBr(BranchInst *BI);
718     void addDeadBlock(BasicBlock *BB);
719     void assignValNumForDeadCode();
720   };
721
722   char GVN::ID = 0;
723 }
724
725 // createGVNPass - The public interface to this file...
726 FunctionPass *llvm::createGVNPass(bool NoLoads) {
727   return new GVN(NoLoads);
728 }
729
730 INITIALIZE_PASS_BEGIN(GVN, "gvn", "Global Value Numbering", false, false)
731 INITIALIZE_PASS_DEPENDENCY(MemoryDependenceAnalysis)
732 INITIALIZE_PASS_DEPENDENCY(DominatorTreeWrapperPass)
733 INITIALIZE_PASS_DEPENDENCY(TargetLibraryInfo)
734 INITIALIZE_AG_DEPENDENCY(AliasAnalysis)
735 INITIALIZE_PASS_END(GVN, "gvn", "Global Value Numbering", false, false)
736
737 #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
738 void GVN::dump(DenseMap<uint32_t, Value*>& d) {
739   errs() << "{\n";
740   for (DenseMap<uint32_t, Value*>::iterator I = d.begin(),
741        E = d.end(); I != E; ++I) {
742       errs() << I->first << "\n";
743       I->second->dump();
744   }
745   errs() << "}\n";
746 }
747 #endif
748
749 /// IsValueFullyAvailableInBlock - Return true if we can prove that the value
750 /// we're analyzing is fully available in the specified block.  As we go, keep
751 /// track of which blocks we know are fully alive in FullyAvailableBlocks.  This
752 /// map is actually a tri-state map with the following values:
753 ///   0) we know the block *is not* fully available.
754 ///   1) we know the block *is* fully available.
755 ///   2) we do not know whether the block is fully available or not, but we are
756 ///      currently speculating that it will be.
757 ///   3) we are speculating for this block and have used that to speculate for
758 ///      other blocks.
759 static bool IsValueFullyAvailableInBlock(BasicBlock *BB,
760                             DenseMap<BasicBlock*, char> &FullyAvailableBlocks,
761                             uint32_t RecurseDepth) {
762   if (RecurseDepth > MaxRecurseDepth)
763     return false;
764
765   // Optimistically assume that the block is fully available and check to see
766   // if we already know about this block in one lookup.
767   std::pair<DenseMap<BasicBlock*, char>::iterator, char> IV =
768     FullyAvailableBlocks.insert(std::make_pair(BB, 2));
769
770   // If the entry already existed for this block, return the precomputed value.
771   if (!IV.second) {
772     // If this is a speculative "available" value, mark it as being used for
773     // speculation of other blocks.
774     if (IV.first->second == 2)
775       IV.first->second = 3;
776     return IV.first->second != 0;
777   }
778
779   // Otherwise, see if it is fully available in all predecessors.
780   pred_iterator PI = pred_begin(BB), PE = pred_end(BB);
781
782   // If this block has no predecessors, it isn't live-in here.
783   if (PI == PE)
784     goto SpeculationFailure;
785
786   for (; PI != PE; ++PI)
787     // If the value isn't fully available in one of our predecessors, then it
788     // isn't fully available in this block either.  Undo our previous
789     // optimistic assumption and bail out.
790     if (!IsValueFullyAvailableInBlock(*PI, FullyAvailableBlocks,RecurseDepth+1))
791       goto SpeculationFailure;
792
793   return true;
794
795 // SpeculationFailure - If we get here, we found out that this is not, after
796 // all, a fully-available block.  We have a problem if we speculated on this and
797 // used the speculation to mark other blocks as available.
798 SpeculationFailure:
799   char &BBVal = FullyAvailableBlocks[BB];
800
801   // If we didn't speculate on this, just return with it set to false.
802   if (BBVal == 2) {
803     BBVal = 0;
804     return false;
805   }
806
807   // If we did speculate on this value, we could have blocks set to 1 that are
808   // incorrect.  Walk the (transitive) successors of this block and mark them as
809   // 0 if set to one.
810   SmallVector<BasicBlock*, 32> BBWorklist;
811   BBWorklist.push_back(BB);
812
813   do {
814     BasicBlock *Entry = BBWorklist.pop_back_val();
815     // Note that this sets blocks to 0 (unavailable) if they happen to not
816     // already be in FullyAvailableBlocks.  This is safe.
817     char &EntryVal = FullyAvailableBlocks[Entry];
818     if (EntryVal == 0) continue;  // Already unavailable.
819
820     // Mark as unavailable.
821     EntryVal = 0;
822
823     BBWorklist.append(succ_begin(Entry), succ_end(Entry));
824   } while (!BBWorklist.empty());
825
826   return false;
827 }
828
829
830 /// CanCoerceMustAliasedValueToLoad - Return true if
831 /// CoerceAvailableValueToLoadType will succeed.
832 static bool CanCoerceMustAliasedValueToLoad(Value *StoredVal,
833                                             Type *LoadTy,
834                                             const DataLayout &DL) {
835   // If the loaded or stored value is an first class array or struct, don't try
836   // to transform them.  We need to be able to bitcast to integer.
837   if (LoadTy->isStructTy() || LoadTy->isArrayTy() ||
838       StoredVal->getType()->isStructTy() ||
839       StoredVal->getType()->isArrayTy())
840     return false;
841
842   // The store has to be at least as big as the load.
843   if (DL.getTypeSizeInBits(StoredVal->getType()) <
844         DL.getTypeSizeInBits(LoadTy))
845     return false;
846
847   return true;
848 }
849
850 /// CoerceAvailableValueToLoadType - If we saw a store of a value to memory, and
851 /// then a load from a must-aliased pointer of a different type, try to coerce
852 /// the stored value.  LoadedTy is the type of the load we want to replace and
853 /// InsertPt is the place to insert new instructions.
854 ///
855 /// If we can't do it, return null.
856 static Value *CoerceAvailableValueToLoadType(Value *StoredVal,
857                                              Type *LoadedTy,
858                                              Instruction *InsertPt,
859                                              const DataLayout &DL) {
860   if (!CanCoerceMustAliasedValueToLoad(StoredVal, LoadedTy, DL))
861     return nullptr;
862
863   // If this is already the right type, just return it.
864   Type *StoredValTy = StoredVal->getType();
865
866   uint64_t StoreSize = DL.getTypeSizeInBits(StoredValTy);
867   uint64_t LoadSize = DL.getTypeSizeInBits(LoadedTy);
868
869   // If the store and reload are the same size, we can always reuse it.
870   if (StoreSize == LoadSize) {
871     // Pointer to Pointer -> use bitcast.
872     if (StoredValTy->getScalarType()->isPointerTy() &&
873         LoadedTy->getScalarType()->isPointerTy())
874       return new BitCastInst(StoredVal, LoadedTy, "", InsertPt);
875
876     // Convert source pointers to integers, which can be bitcast.
877     if (StoredValTy->getScalarType()->isPointerTy()) {
878       StoredValTy = DL.getIntPtrType(StoredValTy);
879       StoredVal = new PtrToIntInst(StoredVal, StoredValTy, "", InsertPt);
880     }
881
882     Type *TypeToCastTo = LoadedTy;
883     if (TypeToCastTo->getScalarType()->isPointerTy())
884       TypeToCastTo = DL.getIntPtrType(TypeToCastTo);
885
886     if (StoredValTy != TypeToCastTo)
887       StoredVal = new BitCastInst(StoredVal, TypeToCastTo, "", InsertPt);
888
889     // Cast to pointer if the load needs a pointer type.
890     if (LoadedTy->getScalarType()->isPointerTy())
891       StoredVal = new IntToPtrInst(StoredVal, LoadedTy, "", InsertPt);
892
893     return StoredVal;
894   }
895
896   // If the loaded value is smaller than the available value, then we can
897   // extract out a piece from it.  If the available value is too small, then we
898   // can't do anything.
899   assert(StoreSize >= LoadSize && "CanCoerceMustAliasedValueToLoad fail");
900
901   // Convert source pointers to integers, which can be manipulated.
902   if (StoredValTy->getScalarType()->isPointerTy()) {
903     StoredValTy = DL.getIntPtrType(StoredValTy);
904     StoredVal = new PtrToIntInst(StoredVal, StoredValTy, "", InsertPt);
905   }
906
907   // Convert vectors and fp to integer, which can be manipulated.
908   if (!StoredValTy->isIntegerTy()) {
909     StoredValTy = IntegerType::get(StoredValTy->getContext(), StoreSize);
910     StoredVal = new BitCastInst(StoredVal, StoredValTy, "", InsertPt);
911   }
912
913   // If this is a big-endian system, we need to shift the value down to the low
914   // bits so that a truncate will work.
915   if (DL.isBigEndian()) {
916     Constant *Val = ConstantInt::get(StoredVal->getType(), StoreSize-LoadSize);
917     StoredVal = BinaryOperator::CreateLShr(StoredVal, Val, "tmp", InsertPt);
918   }
919
920   // Truncate the integer to the right size now.
921   Type *NewIntTy = IntegerType::get(StoredValTy->getContext(), LoadSize);
922   StoredVal = new TruncInst(StoredVal, NewIntTy, "trunc", InsertPt);
923
924   if (LoadedTy == NewIntTy)
925     return StoredVal;
926
927   // If the result is a pointer, inttoptr.
928   if (LoadedTy->getScalarType()->isPointerTy())
929     return new IntToPtrInst(StoredVal, LoadedTy, "inttoptr", InsertPt);
930
931   // Otherwise, bitcast.
932   return new BitCastInst(StoredVal, LoadedTy, "bitcast", InsertPt);
933 }
934
935 /// AnalyzeLoadFromClobberingWrite - This function is called when we have a
936 /// memdep query of a load that ends up being a clobbering memory write (store,
937 /// memset, memcpy, memmove).  This means that the write *may* provide bits used
938 /// by the load but we can't be sure because the pointers don't mustalias.
939 ///
940 /// Check this case to see if there is anything more we can do before we give
941 /// up.  This returns -1 if we have to give up, or a byte number in the stored
942 /// value of the piece that feeds the load.
943 static int AnalyzeLoadFromClobberingWrite(Type *LoadTy, Value *LoadPtr,
944                                           Value *WritePtr,
945                                           uint64_t WriteSizeInBits,
946                                           const DataLayout &DL) {
947   // If the loaded or stored value is a first class array or struct, don't try
948   // to transform them.  We need to be able to bitcast to integer.
949   if (LoadTy->isStructTy() || LoadTy->isArrayTy())
950     return -1;
951
952   int64_t StoreOffset = 0, LoadOffset = 0;
953   Value *StoreBase = GetPointerBaseWithConstantOffset(WritePtr,StoreOffset,&DL);
954   Value *LoadBase = GetPointerBaseWithConstantOffset(LoadPtr, LoadOffset, &DL);
955   if (StoreBase != LoadBase)
956     return -1;
957
958   // If the load and store are to the exact same address, they should have been
959   // a must alias.  AA must have gotten confused.
960   // FIXME: Study to see if/when this happens.  One case is forwarding a memset
961   // to a load from the base of the memset.
962 #if 0
963   if (LoadOffset == StoreOffset) {
964     dbgs() << "STORE/LOAD DEP WITH COMMON POINTER MISSED:\n"
965     << "Base       = " << *StoreBase << "\n"
966     << "Store Ptr  = " << *WritePtr << "\n"
967     << "Store Offs = " << StoreOffset << "\n"
968     << "Load Ptr   = " << *LoadPtr << "\n";
969     abort();
970   }
971 #endif
972
973   // If the load and store don't overlap at all, the store doesn't provide
974   // anything to the load.  In this case, they really don't alias at all, AA
975   // must have gotten confused.
976   uint64_t LoadSize = DL.getTypeSizeInBits(LoadTy);
977
978   if ((WriteSizeInBits & 7) | (LoadSize & 7))
979     return -1;
980   uint64_t StoreSize = WriteSizeInBits >> 3;  // Convert to bytes.
981   LoadSize >>= 3;
982
983
984   bool isAAFailure = false;
985   if (StoreOffset < LoadOffset)
986     isAAFailure = StoreOffset+int64_t(StoreSize) <= LoadOffset;
987   else
988     isAAFailure = LoadOffset+int64_t(LoadSize) <= StoreOffset;
989
990   if (isAAFailure) {
991 #if 0
992     dbgs() << "STORE LOAD DEP WITH COMMON BASE:\n"
993     << "Base       = " << *StoreBase << "\n"
994     << "Store Ptr  = " << *WritePtr << "\n"
995     << "Store Offs = " << StoreOffset << "\n"
996     << "Load Ptr   = " << *LoadPtr << "\n";
997     abort();
998 #endif
999     return -1;
1000   }
1001
1002   // If the Load isn't completely contained within the stored bits, we don't
1003   // have all the bits to feed it.  We could do something crazy in the future
1004   // (issue a smaller load then merge the bits in) but this seems unlikely to be
1005   // valuable.
1006   if (StoreOffset > LoadOffset ||
1007       StoreOffset+StoreSize < LoadOffset+LoadSize)
1008     return -1;
1009
1010   // Okay, we can do this transformation.  Return the number of bytes into the
1011   // store that the load is.
1012   return LoadOffset-StoreOffset;
1013 }
1014
1015 /// AnalyzeLoadFromClobberingStore - This function is called when we have a
1016 /// memdep query of a load that ends up being a clobbering store.
1017 static int AnalyzeLoadFromClobberingStore(Type *LoadTy, Value *LoadPtr,
1018                                           StoreInst *DepSI,
1019                                           const DataLayout &DL) {
1020   // Cannot handle reading from store of first-class aggregate yet.
1021   if (DepSI->getValueOperand()->getType()->isStructTy() ||
1022       DepSI->getValueOperand()->getType()->isArrayTy())
1023     return -1;
1024
1025   Value *StorePtr = DepSI->getPointerOperand();
1026   uint64_t StoreSize =DL.getTypeSizeInBits(DepSI->getValueOperand()->getType());
1027   return AnalyzeLoadFromClobberingWrite(LoadTy, LoadPtr,
1028                                         StorePtr, StoreSize, DL);
1029 }
1030
1031 /// AnalyzeLoadFromClobberingLoad - This function is called when we have a
1032 /// memdep query of a load that ends up being clobbered by another load.  See if
1033 /// the other load can feed into the second load.
1034 static int AnalyzeLoadFromClobberingLoad(Type *LoadTy, Value *LoadPtr,
1035                                          LoadInst *DepLI, const DataLayout &DL){
1036   // Cannot handle reading from store of first-class aggregate yet.
1037   if (DepLI->getType()->isStructTy() || DepLI->getType()->isArrayTy())
1038     return -1;
1039
1040   Value *DepPtr = DepLI->getPointerOperand();
1041   uint64_t DepSize = DL.getTypeSizeInBits(DepLI->getType());
1042   int R = AnalyzeLoadFromClobberingWrite(LoadTy, LoadPtr, DepPtr, DepSize, DL);
1043   if (R != -1) return R;
1044
1045   // If we have a load/load clobber an DepLI can be widened to cover this load,
1046   // then we should widen it!
1047   int64_t LoadOffs = 0;
1048   const Value *LoadBase =
1049     GetPointerBaseWithConstantOffset(LoadPtr, LoadOffs, &DL);
1050   unsigned LoadSize = DL.getTypeStoreSize(LoadTy);
1051
1052   unsigned Size = MemoryDependenceAnalysis::
1053     getLoadLoadClobberFullWidthSize(LoadBase, LoadOffs, LoadSize, DepLI, DL);
1054   if (Size == 0) return -1;
1055
1056   return AnalyzeLoadFromClobberingWrite(LoadTy, LoadPtr, DepPtr, Size*8, DL);
1057 }
1058
1059
1060
1061 static int AnalyzeLoadFromClobberingMemInst(Type *LoadTy, Value *LoadPtr,
1062                                             MemIntrinsic *MI,
1063                                             const DataLayout &DL) {
1064   // If the mem operation is a non-constant size, we can't handle it.
1065   ConstantInt *SizeCst = dyn_cast<ConstantInt>(MI->getLength());
1066   if (!SizeCst) return -1;
1067   uint64_t MemSizeInBits = SizeCst->getZExtValue()*8;
1068
1069   // If this is memset, we just need to see if the offset is valid in the size
1070   // of the memset..
1071   if (MI->getIntrinsicID() == Intrinsic::memset)
1072     return AnalyzeLoadFromClobberingWrite(LoadTy, LoadPtr, MI->getDest(),
1073                                           MemSizeInBits, DL);
1074
1075   // If we have a memcpy/memmove, the only case we can handle is if this is a
1076   // copy from constant memory.  In that case, we can read directly from the
1077   // constant memory.
1078   MemTransferInst *MTI = cast<MemTransferInst>(MI);
1079
1080   Constant *Src = dyn_cast<Constant>(MTI->getSource());
1081   if (!Src) return -1;
1082
1083   GlobalVariable *GV = dyn_cast<GlobalVariable>(GetUnderlyingObject(Src, &DL));
1084   if (!GV || !GV->isConstant()) return -1;
1085
1086   // See if the access is within the bounds of the transfer.
1087   int Offset = AnalyzeLoadFromClobberingWrite(LoadTy, LoadPtr,
1088                                               MI->getDest(), MemSizeInBits, DL);
1089   if (Offset == -1)
1090     return Offset;
1091
1092   unsigned AS = Src->getType()->getPointerAddressSpace();
1093   // Otherwise, see if we can constant fold a load from the constant with the
1094   // offset applied as appropriate.
1095   Src = ConstantExpr::getBitCast(Src,
1096                                  Type::getInt8PtrTy(Src->getContext(), AS));
1097   Constant *OffsetCst =
1098     ConstantInt::get(Type::getInt64Ty(Src->getContext()), (unsigned)Offset);
1099   Src = ConstantExpr::getGetElementPtr(Src, OffsetCst);
1100   Src = ConstantExpr::getBitCast(Src, PointerType::get(LoadTy, AS));
1101   if (ConstantFoldLoadFromConstPtr(Src, &DL))
1102     return Offset;
1103   return -1;
1104 }
1105
1106
1107 /// GetStoreValueForLoad - This function is called when we have a
1108 /// memdep query of a load that ends up being a clobbering store.  This means
1109 /// that the store provides bits used by the load but we the pointers don't
1110 /// mustalias.  Check this case to see if there is anything more we can do
1111 /// before we give up.
1112 static Value *GetStoreValueForLoad(Value *SrcVal, unsigned Offset,
1113                                    Type *LoadTy,
1114                                    Instruction *InsertPt, const DataLayout &DL){
1115   LLVMContext &Ctx = SrcVal->getType()->getContext();
1116
1117   uint64_t StoreSize = (DL.getTypeSizeInBits(SrcVal->getType()) + 7) / 8;
1118   uint64_t LoadSize = (DL.getTypeSizeInBits(LoadTy) + 7) / 8;
1119
1120   IRBuilder<> Builder(InsertPt->getParent(), InsertPt);
1121
1122   // Compute which bits of the stored value are being used by the load.  Convert
1123   // to an integer type to start with.
1124   if (SrcVal->getType()->getScalarType()->isPointerTy())
1125     SrcVal = Builder.CreatePtrToInt(SrcVal,
1126         DL.getIntPtrType(SrcVal->getType()));
1127   if (!SrcVal->getType()->isIntegerTy())
1128     SrcVal = Builder.CreateBitCast(SrcVal, IntegerType::get(Ctx, StoreSize*8));
1129
1130   // Shift the bits to the least significant depending on endianness.
1131   unsigned ShiftAmt;
1132   if (DL.isLittleEndian())
1133     ShiftAmt = Offset*8;
1134   else
1135     ShiftAmt = (StoreSize-LoadSize-Offset)*8;
1136
1137   if (ShiftAmt)
1138     SrcVal = Builder.CreateLShr(SrcVal, ShiftAmt);
1139
1140   if (LoadSize != StoreSize)
1141     SrcVal = Builder.CreateTrunc(SrcVal, IntegerType::get(Ctx, LoadSize*8));
1142
1143   return CoerceAvailableValueToLoadType(SrcVal, LoadTy, InsertPt, DL);
1144 }
1145
1146 /// GetLoadValueForLoad - This function is called when we have a
1147 /// memdep query of a load that ends up being a clobbering load.  This means
1148 /// that the load *may* provide bits used by the load but we can't be sure
1149 /// because the pointers don't mustalias.  Check this case to see if there is
1150 /// anything more we can do before we give up.
1151 static Value *GetLoadValueForLoad(LoadInst *SrcVal, unsigned Offset,
1152                                   Type *LoadTy, Instruction *InsertPt,
1153                                   GVN &gvn) {
1154   const DataLayout &DL = *gvn.getDataLayout();
1155   // If Offset+LoadTy exceeds the size of SrcVal, then we must be wanting to
1156   // widen SrcVal out to a larger load.
1157   unsigned SrcValSize = DL.getTypeStoreSize(SrcVal->getType());
1158   unsigned LoadSize = DL.getTypeStoreSize(LoadTy);
1159   if (Offset+LoadSize > SrcValSize) {
1160     assert(SrcVal->isSimple() && "Cannot widen volatile/atomic load!");
1161     assert(SrcVal->getType()->isIntegerTy() && "Can't widen non-integer load");
1162     // If we have a load/load clobber an DepLI can be widened to cover this
1163     // load, then we should widen it to the next power of 2 size big enough!
1164     unsigned NewLoadSize = Offset+LoadSize;
1165     if (!isPowerOf2_32(NewLoadSize))
1166       NewLoadSize = NextPowerOf2(NewLoadSize);
1167
1168     Value *PtrVal = SrcVal->getPointerOperand();
1169
1170     // Insert the new load after the old load.  This ensures that subsequent
1171     // memdep queries will find the new load.  We can't easily remove the old
1172     // load completely because it is already in the value numbering table.
1173     IRBuilder<> Builder(SrcVal->getParent(), ++BasicBlock::iterator(SrcVal));
1174     Type *DestPTy =
1175       IntegerType::get(LoadTy->getContext(), NewLoadSize*8);
1176     DestPTy = PointerType::get(DestPTy,
1177                                PtrVal->getType()->getPointerAddressSpace());
1178     Builder.SetCurrentDebugLocation(SrcVal->getDebugLoc());
1179     PtrVal = Builder.CreateBitCast(PtrVal, DestPTy);
1180     LoadInst *NewLoad = Builder.CreateLoad(PtrVal);
1181     NewLoad->takeName(SrcVal);
1182     NewLoad->setAlignment(SrcVal->getAlignment());
1183
1184     DEBUG(dbgs() << "GVN WIDENED LOAD: " << *SrcVal << "\n");
1185     DEBUG(dbgs() << "TO: " << *NewLoad << "\n");
1186
1187     // Replace uses of the original load with the wider load.  On a big endian
1188     // system, we need to shift down to get the relevant bits.
1189     Value *RV = NewLoad;
1190     if (DL.isBigEndian())
1191       RV = Builder.CreateLShr(RV,
1192                     NewLoadSize*8-SrcVal->getType()->getPrimitiveSizeInBits());
1193     RV = Builder.CreateTrunc(RV, SrcVal->getType());
1194     SrcVal->replaceAllUsesWith(RV);
1195
1196     // We would like to use gvn.markInstructionForDeletion here, but we can't
1197     // because the load is already memoized into the leader map table that GVN
1198     // tracks.  It is potentially possible to remove the load from the table,
1199     // but then there all of the operations based on it would need to be
1200     // rehashed.  Just leave the dead load around.
1201     gvn.getMemDep().removeInstruction(SrcVal);
1202     SrcVal = NewLoad;
1203   }
1204
1205   return GetStoreValueForLoad(SrcVal, Offset, LoadTy, InsertPt, DL);
1206 }
1207
1208
1209 /// GetMemInstValueForLoad - This function is called when we have a
1210 /// memdep query of a load that ends up being a clobbering mem intrinsic.
1211 static Value *GetMemInstValueForLoad(MemIntrinsic *SrcInst, unsigned Offset,
1212                                      Type *LoadTy, Instruction *InsertPt,
1213                                      const DataLayout &DL){
1214   LLVMContext &Ctx = LoadTy->getContext();
1215   uint64_t LoadSize = DL.getTypeSizeInBits(LoadTy)/8;
1216
1217   IRBuilder<> Builder(InsertPt->getParent(), InsertPt);
1218
1219   // We know that this method is only called when the mem transfer fully
1220   // provides the bits for the load.
1221   if (MemSetInst *MSI = dyn_cast<MemSetInst>(SrcInst)) {
1222     // memset(P, 'x', 1234) -> splat('x'), even if x is a variable, and
1223     // independently of what the offset is.
1224     Value *Val = MSI->getValue();
1225     if (LoadSize != 1)
1226       Val = Builder.CreateZExt(Val, IntegerType::get(Ctx, LoadSize*8));
1227
1228     Value *OneElt = Val;
1229
1230     // Splat the value out to the right number of bits.
1231     for (unsigned NumBytesSet = 1; NumBytesSet != LoadSize; ) {
1232       // If we can double the number of bytes set, do it.
1233       if (NumBytesSet*2 <= LoadSize) {
1234         Value *ShVal = Builder.CreateShl(Val, NumBytesSet*8);
1235         Val = Builder.CreateOr(Val, ShVal);
1236         NumBytesSet <<= 1;
1237         continue;
1238       }
1239
1240       // Otherwise insert one byte at a time.
1241       Value *ShVal = Builder.CreateShl(Val, 1*8);
1242       Val = Builder.CreateOr(OneElt, ShVal);
1243       ++NumBytesSet;
1244     }
1245
1246     return CoerceAvailableValueToLoadType(Val, LoadTy, InsertPt, DL);
1247   }
1248
1249   // Otherwise, this is a memcpy/memmove from a constant global.
1250   MemTransferInst *MTI = cast<MemTransferInst>(SrcInst);
1251   Constant *Src = cast<Constant>(MTI->getSource());
1252   unsigned AS = Src->getType()->getPointerAddressSpace();
1253
1254   // Otherwise, see if we can constant fold a load from the constant with the
1255   // offset applied as appropriate.
1256   Src = ConstantExpr::getBitCast(Src,
1257                                  Type::getInt8PtrTy(Src->getContext(), AS));
1258   Constant *OffsetCst =
1259     ConstantInt::get(Type::getInt64Ty(Src->getContext()), (unsigned)Offset);
1260   Src = ConstantExpr::getGetElementPtr(Src, OffsetCst);
1261   Src = ConstantExpr::getBitCast(Src, PointerType::get(LoadTy, AS));
1262   return ConstantFoldLoadFromConstPtr(Src, &DL);
1263 }
1264
1265
1266 /// ConstructSSAForLoadSet - Given a set of loads specified by ValuesPerBlock,
1267 /// construct SSA form, allowing us to eliminate LI.  This returns the value
1268 /// that should be used at LI's definition site.
1269 static Value *ConstructSSAForLoadSet(LoadInst *LI,
1270                          SmallVectorImpl<AvailableValueInBlock> &ValuesPerBlock,
1271                                      GVN &gvn) {
1272   // Check for the fully redundant, dominating load case.  In this case, we can
1273   // just use the dominating value directly.
1274   if (ValuesPerBlock.size() == 1 &&
1275       gvn.getDominatorTree().properlyDominates(ValuesPerBlock[0].BB,
1276                                                LI->getParent())) {
1277     assert(!ValuesPerBlock[0].isUndefValue() && "Dead BB dominate this block");
1278     return ValuesPerBlock[0].MaterializeAdjustedValue(LI->getType(), gvn);
1279   }
1280
1281   // Otherwise, we have to construct SSA form.
1282   SmallVector<PHINode*, 8> NewPHIs;
1283   SSAUpdater SSAUpdate(&NewPHIs);
1284   SSAUpdate.Initialize(LI->getType(), LI->getName());
1285
1286   Type *LoadTy = LI->getType();
1287
1288   for (unsigned i = 0, e = ValuesPerBlock.size(); i != e; ++i) {
1289     const AvailableValueInBlock &AV = ValuesPerBlock[i];
1290     BasicBlock *BB = AV.BB;
1291
1292     if (SSAUpdate.HasValueForBlock(BB))
1293       continue;
1294
1295     SSAUpdate.AddAvailableValue(BB, AV.MaterializeAdjustedValue(LoadTy, gvn));
1296   }
1297
1298   // Perform PHI construction.
1299   Value *V = SSAUpdate.GetValueInMiddleOfBlock(LI->getParent());
1300
1301   // If new PHI nodes were created, notify alias analysis.
1302   if (V->getType()->getScalarType()->isPointerTy()) {
1303     AliasAnalysis *AA = gvn.getAliasAnalysis();
1304
1305     for (unsigned i = 0, e = NewPHIs.size(); i != e; ++i)
1306       AA->copyValue(LI, NewPHIs[i]);
1307
1308     // Now that we've copied information to the new PHIs, scan through
1309     // them again and inform alias analysis that we've added potentially
1310     // escaping uses to any values that are operands to these PHIs.
1311     for (unsigned i = 0, e = NewPHIs.size(); i != e; ++i) {
1312       PHINode *P = NewPHIs[i];
1313       for (unsigned ii = 0, ee = P->getNumIncomingValues(); ii != ee; ++ii) {
1314         unsigned jj = PHINode::getOperandNumForIncomingValue(ii);
1315         AA->addEscapingUse(P->getOperandUse(jj));
1316       }
1317     }
1318   }
1319
1320   return V;
1321 }
1322
1323 Value *AvailableValueInBlock::MaterializeAdjustedValue(Type *LoadTy, GVN &gvn) const {
1324   Value *Res;
1325   if (isSimpleValue()) {
1326     Res = getSimpleValue();
1327     if (Res->getType() != LoadTy) {
1328       const DataLayout *DL = gvn.getDataLayout();
1329       assert(DL && "Need target data to handle type mismatch case");
1330       Res = GetStoreValueForLoad(Res, Offset, LoadTy, BB->getTerminator(),
1331                                  *DL);
1332   
1333       DEBUG(dbgs() << "GVN COERCED NONLOCAL VAL:\nOffset: " << Offset << "  "
1334                    << *getSimpleValue() << '\n'
1335                    << *Res << '\n' << "\n\n\n");
1336     }
1337   } else if (isCoercedLoadValue()) {
1338     LoadInst *Load = getCoercedLoadValue();
1339     if (Load->getType() == LoadTy && Offset == 0) {
1340       Res = Load;
1341     } else {
1342       Res = GetLoadValueForLoad(Load, Offset, LoadTy, BB->getTerminator(),
1343                                 gvn);
1344   
1345       DEBUG(dbgs() << "GVN COERCED NONLOCAL LOAD:\nOffset: " << Offset << "  "
1346                    << *getCoercedLoadValue() << '\n'
1347                    << *Res << '\n' << "\n\n\n");
1348     }
1349   } else if (isMemIntrinValue()) {
1350     const DataLayout *DL = gvn.getDataLayout();
1351     assert(DL && "Need target data to handle type mismatch case");
1352     Res = GetMemInstValueForLoad(getMemIntrinValue(), Offset,
1353                                  LoadTy, BB->getTerminator(), *DL);
1354     DEBUG(dbgs() << "GVN COERCED NONLOCAL MEM INTRIN:\nOffset: " << Offset
1355                  << "  " << *getMemIntrinValue() << '\n'
1356                  << *Res << '\n' << "\n\n\n");
1357   } else {
1358     assert(isUndefValue() && "Should be UndefVal");
1359     DEBUG(dbgs() << "GVN COERCED NONLOCAL Undef:\n";);
1360     return UndefValue::get(LoadTy);
1361   }
1362   return Res;
1363 }
1364
1365 static bool isLifetimeStart(const Instruction *Inst) {
1366   if (const IntrinsicInst* II = dyn_cast<IntrinsicInst>(Inst))
1367     return II->getIntrinsicID() == Intrinsic::lifetime_start;
1368   return false;
1369 }
1370
1371 void GVN::AnalyzeLoadAvailability(LoadInst *LI, LoadDepVect &Deps, 
1372                                   AvailValInBlkVect &ValuesPerBlock,
1373                                   UnavailBlkVect &UnavailableBlocks) {
1374
1375   // Filter out useless results (non-locals, etc).  Keep track of the blocks
1376   // where we have a value available in repl, also keep track of whether we see
1377   // dependencies that produce an unknown value for the load (such as a call
1378   // that could potentially clobber the load).
1379   unsigned NumDeps = Deps.size();
1380   for (unsigned i = 0, e = NumDeps; i != e; ++i) {
1381     BasicBlock *DepBB = Deps[i].getBB();
1382     MemDepResult DepInfo = Deps[i].getResult();
1383
1384     if (DeadBlocks.count(DepBB)) {
1385       // Dead dependent mem-op disguise as a load evaluating the same value
1386       // as the load in question.
1387       ValuesPerBlock.push_back(AvailableValueInBlock::getUndef(DepBB));
1388       continue;
1389     }
1390
1391     if (!DepInfo.isDef() && !DepInfo.isClobber()) {
1392       UnavailableBlocks.push_back(DepBB);
1393       continue;
1394     }
1395
1396     if (DepInfo.isClobber()) {
1397       // The address being loaded in this non-local block may not be the same as
1398       // the pointer operand of the load if PHI translation occurs.  Make sure
1399       // to consider the right address.
1400       Value *Address = Deps[i].getAddress();
1401
1402       // If the dependence is to a store that writes to a superset of the bits
1403       // read by the load, we can extract the bits we need for the load from the
1404       // stored value.
1405       if (StoreInst *DepSI = dyn_cast<StoreInst>(DepInfo.getInst())) {
1406         if (DL && Address) {
1407           int Offset = AnalyzeLoadFromClobberingStore(LI->getType(), Address,
1408                                                       DepSI, *DL);
1409           if (Offset != -1) {
1410             ValuesPerBlock.push_back(AvailableValueInBlock::get(DepBB,
1411                                                        DepSI->getValueOperand(),
1412                                                                 Offset));
1413             continue;
1414           }
1415         }
1416       }
1417
1418       // Check to see if we have something like this:
1419       //    load i32* P
1420       //    load i8* (P+1)
1421       // if we have this, replace the later with an extraction from the former.
1422       if (LoadInst *DepLI = dyn_cast<LoadInst>(DepInfo.getInst())) {
1423         // If this is a clobber and L is the first instruction in its block, then
1424         // we have the first instruction in the entry block.
1425         if (DepLI != LI && Address && DL) {
1426           int Offset = AnalyzeLoadFromClobberingLoad(LI->getType(), Address,
1427                                                      DepLI, *DL);
1428
1429           if (Offset != -1) {
1430             ValuesPerBlock.push_back(AvailableValueInBlock::getLoad(DepBB,DepLI,
1431                                                                     Offset));
1432             continue;
1433           }
1434         }
1435       }
1436
1437       // If the clobbering value is a memset/memcpy/memmove, see if we can
1438       // forward a value on from it.
1439       if (MemIntrinsic *DepMI = dyn_cast<MemIntrinsic>(DepInfo.getInst())) {
1440         if (DL && Address) {
1441           int Offset = AnalyzeLoadFromClobberingMemInst(LI->getType(), Address,
1442                                                         DepMI, *DL);
1443           if (Offset != -1) {
1444             ValuesPerBlock.push_back(AvailableValueInBlock::getMI(DepBB, DepMI,
1445                                                                   Offset));
1446             continue;
1447           }
1448         }
1449       }
1450
1451       UnavailableBlocks.push_back(DepBB);
1452       continue;
1453     }
1454
1455     // DepInfo.isDef() here
1456
1457     Instruction *DepInst = DepInfo.getInst();
1458
1459     // Loading the allocation -> undef.
1460     if (isa<AllocaInst>(DepInst) || isMallocLikeFn(DepInst, TLI) ||
1461         // Loading immediately after lifetime begin -> undef.
1462         isLifetimeStart(DepInst)) {
1463       ValuesPerBlock.push_back(AvailableValueInBlock::get(DepBB,
1464                                              UndefValue::get(LI->getType())));
1465       continue;
1466     }
1467
1468     // Loading from calloc (which zero initializes memory) -> zero
1469     if (isCallocLikeFn(DepInst, TLI)) {
1470       ValuesPerBlock.push_back(AvailableValueInBlock::get(
1471           DepBB, Constant::getNullValue(LI->getType())));
1472       continue;
1473     }
1474
1475     if (StoreInst *S = dyn_cast<StoreInst>(DepInst)) {
1476       // Reject loads and stores that are to the same address but are of
1477       // different types if we have to.
1478       if (S->getValueOperand()->getType() != LI->getType()) {
1479         // If the stored value is larger or equal to the loaded value, we can
1480         // reuse it.
1481         if (!DL || !CanCoerceMustAliasedValueToLoad(S->getValueOperand(),
1482                                                     LI->getType(), *DL)) {
1483           UnavailableBlocks.push_back(DepBB);
1484           continue;
1485         }
1486       }
1487
1488       ValuesPerBlock.push_back(AvailableValueInBlock::get(DepBB,
1489                                                          S->getValueOperand()));
1490       continue;
1491     }
1492
1493     if (LoadInst *LD = dyn_cast<LoadInst>(DepInst)) {
1494       // If the types mismatch and we can't handle it, reject reuse of the load.
1495       if (LD->getType() != LI->getType()) {
1496         // If the stored value is larger or equal to the loaded value, we can
1497         // reuse it.
1498         if (!DL || !CanCoerceMustAliasedValueToLoad(LD, LI->getType(),*DL)) {
1499           UnavailableBlocks.push_back(DepBB);
1500           continue;
1501         }
1502       }
1503       ValuesPerBlock.push_back(AvailableValueInBlock::getLoad(DepBB, LD));
1504       continue;
1505     }
1506
1507     UnavailableBlocks.push_back(DepBB);
1508   }
1509 }
1510
1511 bool GVN::PerformLoadPRE(LoadInst *LI, AvailValInBlkVect &ValuesPerBlock, 
1512                          UnavailBlkVect &UnavailableBlocks) {
1513   // Okay, we have *some* definitions of the value.  This means that the value
1514   // is available in some of our (transitive) predecessors.  Lets think about
1515   // doing PRE of this load.  This will involve inserting a new load into the
1516   // predecessor when it's not available.  We could do this in general, but
1517   // prefer to not increase code size.  As such, we only do this when we know
1518   // that we only have to insert *one* load (which means we're basically moving
1519   // the load, not inserting a new one).
1520
1521   SmallPtrSet<BasicBlock *, 4> Blockers;
1522   for (unsigned i = 0, e = UnavailableBlocks.size(); i != e; ++i)
1523     Blockers.insert(UnavailableBlocks[i]);
1524
1525   // Let's find the first basic block with more than one predecessor.  Walk
1526   // backwards through predecessors if needed.
1527   BasicBlock *LoadBB = LI->getParent();
1528   BasicBlock *TmpBB = LoadBB;
1529
1530   while (TmpBB->getSinglePredecessor()) {
1531     TmpBB = TmpBB->getSinglePredecessor();
1532     if (TmpBB == LoadBB) // Infinite (unreachable) loop.
1533       return false;
1534     if (Blockers.count(TmpBB))
1535       return false;
1536
1537     // If any of these blocks has more than one successor (i.e. if the edge we
1538     // just traversed was critical), then there are other paths through this
1539     // block along which the load may not be anticipated.  Hoisting the load
1540     // above this block would be adding the load to execution paths along
1541     // which it was not previously executed.
1542     if (TmpBB->getTerminator()->getNumSuccessors() != 1)
1543       return false;
1544   }
1545
1546   assert(TmpBB);
1547   LoadBB = TmpBB;
1548
1549   // Check to see how many predecessors have the loaded value fully
1550   // available.
1551   MapVector<BasicBlock *, Value *> PredLoads;
1552   DenseMap<BasicBlock*, char> FullyAvailableBlocks;
1553   for (unsigned i = 0, e = ValuesPerBlock.size(); i != e; ++i)
1554     FullyAvailableBlocks[ValuesPerBlock[i].BB] = true;
1555   for (unsigned i = 0, e = UnavailableBlocks.size(); i != e; ++i)
1556     FullyAvailableBlocks[UnavailableBlocks[i]] = false;
1557
1558   SmallVector<BasicBlock *, 4> CriticalEdgePred;
1559   for (pred_iterator PI = pred_begin(LoadBB), E = pred_end(LoadBB);
1560        PI != E; ++PI) {
1561     BasicBlock *Pred = *PI;
1562     if (IsValueFullyAvailableInBlock(Pred, FullyAvailableBlocks, 0)) {
1563       continue;
1564     }
1565
1566     if (Pred->getTerminator()->getNumSuccessors() != 1) {
1567       if (isa<IndirectBrInst>(Pred->getTerminator())) {
1568         DEBUG(dbgs() << "COULD NOT PRE LOAD BECAUSE OF INDBR CRITICAL EDGE '"
1569               << Pred->getName() << "': " << *LI << '\n');
1570         return false;
1571       }
1572
1573       if (LoadBB->isLandingPad()) {
1574         DEBUG(dbgs()
1575               << "COULD NOT PRE LOAD BECAUSE OF LANDING PAD CRITICAL EDGE '"
1576               << Pred->getName() << "': " << *LI << '\n');
1577         return false;
1578       }
1579
1580       CriticalEdgePred.push_back(Pred);
1581     } else {
1582       // Only add the predecessors that will not be split for now.
1583       PredLoads[Pred] = nullptr;
1584     }
1585   }
1586
1587   // Decide whether PRE is profitable for this load.
1588   unsigned NumUnavailablePreds = PredLoads.size() + CriticalEdgePred.size();
1589   assert(NumUnavailablePreds != 0 &&
1590          "Fully available value should already be eliminated!");
1591
1592   // If this load is unavailable in multiple predecessors, reject it.
1593   // FIXME: If we could restructure the CFG, we could make a common pred with
1594   // all the preds that don't have an available LI and insert a new load into
1595   // that one block.
1596   if (NumUnavailablePreds != 1)
1597       return false;
1598
1599   // Split critical edges, and update the unavailable predecessors accordingly.
1600   for (BasicBlock *OrigPred : CriticalEdgePred) {
1601     BasicBlock *NewPred = splitCriticalEdges(OrigPred, LoadBB);
1602     assert(!PredLoads.count(OrigPred) && "Split edges shouldn't be in map!");
1603     PredLoads[NewPred] = nullptr;
1604     DEBUG(dbgs() << "Split critical edge " << OrigPred->getName() << "->"
1605                  << LoadBB->getName() << '\n');
1606   }
1607
1608   // Check if the load can safely be moved to all the unavailable predecessors.
1609   bool CanDoPRE = true;
1610   SmallVector<Instruction*, 8> NewInsts;
1611   for (auto &PredLoad : PredLoads) {
1612     BasicBlock *UnavailablePred = PredLoad.first;
1613
1614     // Do PHI translation to get its value in the predecessor if necessary.  The
1615     // returned pointer (if non-null) is guaranteed to dominate UnavailablePred.
1616
1617     // If all preds have a single successor, then we know it is safe to insert
1618     // the load on the pred (?!?), so we can insert code to materialize the
1619     // pointer if it is not available.
1620     PHITransAddr Address(LI->getPointerOperand(), DL);
1621     Value *LoadPtr = nullptr;
1622     LoadPtr = Address.PHITranslateWithInsertion(LoadBB, UnavailablePred,
1623                                                 *DT, NewInsts);
1624
1625     // If we couldn't find or insert a computation of this phi translated value,
1626     // we fail PRE.
1627     if (!LoadPtr) {
1628       DEBUG(dbgs() << "COULDN'T INSERT PHI TRANSLATED VALUE OF: "
1629             << *LI->getPointerOperand() << "\n");
1630       CanDoPRE = false;
1631       break;
1632     }
1633
1634     PredLoad.second = LoadPtr;
1635   }
1636
1637   if (!CanDoPRE) {
1638     while (!NewInsts.empty()) {
1639       Instruction *I = NewInsts.pop_back_val();
1640       if (MD) MD->removeInstruction(I);
1641       I->eraseFromParent();
1642     }
1643     // HINT: Don't revert the edge-splitting as following transformation may
1644     // also need to split these critical edges.
1645     return !CriticalEdgePred.empty();
1646   }
1647
1648   // Okay, we can eliminate this load by inserting a reload in the predecessor
1649   // and using PHI construction to get the value in the other predecessors, do
1650   // it.
1651   DEBUG(dbgs() << "GVN REMOVING PRE LOAD: " << *LI << '\n');
1652   DEBUG(if (!NewInsts.empty())
1653           dbgs() << "INSERTED " << NewInsts.size() << " INSTS: "
1654                  << *NewInsts.back() << '\n');
1655
1656   // Assign value numbers to the new instructions.
1657   for (unsigned i = 0, e = NewInsts.size(); i != e; ++i) {
1658     // FIXME: We really _ought_ to insert these value numbers into their
1659     // parent's availability map.  However, in doing so, we risk getting into
1660     // ordering issues.  If a block hasn't been processed yet, we would be
1661     // marking a value as AVAIL-IN, which isn't what we intend.
1662     VN.lookup_or_add(NewInsts[i]);
1663   }
1664
1665   for (const auto &PredLoad : PredLoads) {
1666     BasicBlock *UnavailablePred = PredLoad.first;
1667     Value *LoadPtr = PredLoad.second;
1668
1669     Instruction *NewLoad = new LoadInst(LoadPtr, LI->getName()+".pre", false,
1670                                         LI->getAlignment(),
1671                                         UnavailablePred->getTerminator());
1672
1673     // Transfer the old load's AA tags to the new load.
1674     AAMDNodes Tags;
1675     LI->getAAMetadata(Tags);
1676     if (Tags)
1677       NewLoad->setAAMetadata(Tags);
1678
1679     // Transfer DebugLoc.
1680     NewLoad->setDebugLoc(LI->getDebugLoc());
1681
1682     // Add the newly created load.
1683     ValuesPerBlock.push_back(AvailableValueInBlock::get(UnavailablePred,
1684                                                         NewLoad));
1685     MD->invalidateCachedPointerInfo(LoadPtr);
1686     DEBUG(dbgs() << "GVN INSERTED " << *NewLoad << '\n');
1687   }
1688
1689   // Perform PHI construction.
1690   Value *V = ConstructSSAForLoadSet(LI, ValuesPerBlock, *this);
1691   LI->replaceAllUsesWith(V);
1692   if (isa<PHINode>(V))
1693     V->takeName(LI);
1694   if (V->getType()->getScalarType()->isPointerTy())
1695     MD->invalidateCachedPointerInfo(V);
1696   markInstructionForDeletion(LI);
1697   ++NumPRELoad;
1698   return true;
1699 }
1700
1701 /// processNonLocalLoad - Attempt to eliminate a load whose dependencies are
1702 /// non-local by performing PHI construction.
1703 bool GVN::processNonLocalLoad(LoadInst *LI) {
1704   // Step 1: Find the non-local dependencies of the load.
1705   LoadDepVect Deps;
1706   AliasAnalysis::Location Loc = VN.getAliasAnalysis()->getLocation(LI);
1707   MD->getNonLocalPointerDependency(Loc, true, LI->getParent(), Deps);
1708
1709   // If we had to process more than one hundred blocks to find the
1710   // dependencies, this load isn't worth worrying about.  Optimizing
1711   // it will be too expensive.
1712   unsigned NumDeps = Deps.size();
1713   if (NumDeps > 100)
1714     return false;
1715
1716   // If we had a phi translation failure, we'll have a single entry which is a
1717   // clobber in the current block.  Reject this early.
1718   if (NumDeps == 1 &&
1719       !Deps[0].getResult().isDef() && !Deps[0].getResult().isClobber()) {
1720     DEBUG(
1721       dbgs() << "GVN: non-local load ";
1722       LI->printAsOperand(dbgs());
1723       dbgs() << " has unknown dependencies\n";
1724     );
1725     return false;
1726   }
1727
1728   // Step 2: Analyze the availability of the load
1729   AvailValInBlkVect ValuesPerBlock;
1730   UnavailBlkVect UnavailableBlocks;
1731   AnalyzeLoadAvailability(LI, Deps, ValuesPerBlock, UnavailableBlocks);
1732
1733   // If we have no predecessors that produce a known value for this load, exit
1734   // early.
1735   if (ValuesPerBlock.empty())
1736     return false;
1737
1738   // Step 3: Eliminate fully redundancy.
1739   //
1740   // If all of the instructions we depend on produce a known value for this
1741   // load, then it is fully redundant and we can use PHI insertion to compute
1742   // its value.  Insert PHIs and remove the fully redundant value now.
1743   if (UnavailableBlocks.empty()) {
1744     DEBUG(dbgs() << "GVN REMOVING NONLOCAL LOAD: " << *LI << '\n');
1745
1746     // Perform PHI construction.
1747     Value *V = ConstructSSAForLoadSet(LI, ValuesPerBlock, *this);
1748     LI->replaceAllUsesWith(V);
1749
1750     if (isa<PHINode>(V))
1751       V->takeName(LI);
1752     if (V->getType()->getScalarType()->isPointerTy())
1753       MD->invalidateCachedPointerInfo(V);
1754     markInstructionForDeletion(LI);
1755     ++NumGVNLoad;
1756     return true;
1757   }
1758
1759   // Step 4: Eliminate partial redundancy.
1760   if (!EnablePRE || !EnableLoadPRE)
1761     return false;
1762
1763   return PerformLoadPRE(LI, ValuesPerBlock, UnavailableBlocks);
1764 }
1765
1766
1767 static void patchReplacementInstruction(Instruction *I, Value *Repl) {
1768   // Patch the replacement so that it is not more restrictive than the value
1769   // being replaced.
1770   BinaryOperator *Op = dyn_cast<BinaryOperator>(I);
1771   BinaryOperator *ReplOp = dyn_cast<BinaryOperator>(Repl);
1772   if (Op && ReplOp && isa<OverflowingBinaryOperator>(Op) &&
1773       isa<OverflowingBinaryOperator>(ReplOp)) {
1774     if (ReplOp->hasNoSignedWrap() && !Op->hasNoSignedWrap())
1775       ReplOp->setHasNoSignedWrap(false);
1776     if (ReplOp->hasNoUnsignedWrap() && !Op->hasNoUnsignedWrap())
1777       ReplOp->setHasNoUnsignedWrap(false);
1778   }
1779   if (Instruction *ReplInst = dyn_cast<Instruction>(Repl)) {
1780     // FIXME: If both the original and replacement value are part of the
1781     // same control-flow region (meaning that the execution of one
1782     // guarentees the executation of the other), then we can combine the
1783     // noalias scopes here and do better than the general conservative
1784     // answer used in combineMetadata().
1785
1786     // In general, GVN unifies expressions over different control-flow
1787     // regions, and so we need a conservative combination of the noalias
1788     // scopes.
1789     unsigned KnownIDs[] = {
1790       LLVMContext::MD_tbaa,
1791       LLVMContext::MD_alias_scope,
1792       LLVMContext::MD_noalias,
1793       LLVMContext::MD_range,
1794       LLVMContext::MD_fpmath,
1795       LLVMContext::MD_invariant_load,
1796     };
1797     combineMetadata(ReplInst, I, KnownIDs);
1798   }
1799 }
1800
1801 static void patchAndReplaceAllUsesWith(Instruction *I, Value *Repl) {
1802   patchReplacementInstruction(I, Repl);
1803   I->replaceAllUsesWith(Repl);
1804 }
1805
1806 /// processLoad - Attempt to eliminate a load, first by eliminating it
1807 /// locally, and then attempting non-local elimination if that fails.
1808 bool GVN::processLoad(LoadInst *L) {
1809   if (!MD)
1810     return false;
1811
1812   if (!L->isSimple())
1813     return false;
1814
1815   if (L->use_empty()) {
1816     markInstructionForDeletion(L);
1817     return true;
1818   }
1819
1820   // ... to a pointer that has been loaded from before...
1821   MemDepResult Dep = MD->getDependency(L);
1822
1823   // If we have a clobber and target data is around, see if this is a clobber
1824   // that we can fix up through code synthesis.
1825   if (Dep.isClobber() && DL) {
1826     // Check to see if we have something like this:
1827     //   store i32 123, i32* %P
1828     //   %A = bitcast i32* %P to i8*
1829     //   %B = gep i8* %A, i32 1
1830     //   %C = load i8* %B
1831     //
1832     // We could do that by recognizing if the clobber instructions are obviously
1833     // a common base + constant offset, and if the previous store (or memset)
1834     // completely covers this load.  This sort of thing can happen in bitfield
1835     // access code.
1836     Value *AvailVal = nullptr;
1837     if (StoreInst *DepSI = dyn_cast<StoreInst>(Dep.getInst())) {
1838       int Offset = AnalyzeLoadFromClobberingStore(L->getType(),
1839                                                   L->getPointerOperand(),
1840                                                   DepSI, *DL);
1841       if (Offset != -1)
1842         AvailVal = GetStoreValueForLoad(DepSI->getValueOperand(), Offset,
1843                                         L->getType(), L, *DL);
1844     }
1845
1846     // Check to see if we have something like this:
1847     //    load i32* P
1848     //    load i8* (P+1)
1849     // if we have this, replace the later with an extraction from the former.
1850     if (LoadInst *DepLI = dyn_cast<LoadInst>(Dep.getInst())) {
1851       // If this is a clobber and L is the first instruction in its block, then
1852       // we have the first instruction in the entry block.
1853       if (DepLI == L)
1854         return false;
1855
1856       int Offset = AnalyzeLoadFromClobberingLoad(L->getType(),
1857                                                  L->getPointerOperand(),
1858                                                  DepLI, *DL);
1859       if (Offset != -1)
1860         AvailVal = GetLoadValueForLoad(DepLI, Offset, L->getType(), L, *this);
1861     }
1862
1863     // If the clobbering value is a memset/memcpy/memmove, see if we can forward
1864     // a value on from it.
1865     if (MemIntrinsic *DepMI = dyn_cast<MemIntrinsic>(Dep.getInst())) {
1866       int Offset = AnalyzeLoadFromClobberingMemInst(L->getType(),
1867                                                     L->getPointerOperand(),
1868                                                     DepMI, *DL);
1869       if (Offset != -1)
1870         AvailVal = GetMemInstValueForLoad(DepMI, Offset, L->getType(), L, *DL);
1871     }
1872
1873     if (AvailVal) {
1874       DEBUG(dbgs() << "GVN COERCED INST:\n" << *Dep.getInst() << '\n'
1875             << *AvailVal << '\n' << *L << "\n\n\n");
1876
1877       // Replace the load!
1878       L->replaceAllUsesWith(AvailVal);
1879       if (AvailVal->getType()->getScalarType()->isPointerTy())
1880         MD->invalidateCachedPointerInfo(AvailVal);
1881       markInstructionForDeletion(L);
1882       ++NumGVNLoad;
1883       return true;
1884     }
1885   }
1886
1887   // If the value isn't available, don't do anything!
1888   if (Dep.isClobber()) {
1889     DEBUG(
1890       // fast print dep, using operator<< on instruction is too slow.
1891       dbgs() << "GVN: load ";
1892       L->printAsOperand(dbgs());
1893       Instruction *I = Dep.getInst();
1894       dbgs() << " is clobbered by " << *I << '\n';
1895     );
1896     return false;
1897   }
1898
1899   // If it is defined in another block, try harder.
1900   if (Dep.isNonLocal())
1901     return processNonLocalLoad(L);
1902
1903   if (!Dep.isDef()) {
1904     DEBUG(
1905       // fast print dep, using operator<< on instruction is too slow.
1906       dbgs() << "GVN: load ";
1907       L->printAsOperand(dbgs());
1908       dbgs() << " has unknown dependence\n";
1909     );
1910     return false;
1911   }
1912
1913   Instruction *DepInst = Dep.getInst();
1914   if (StoreInst *DepSI = dyn_cast<StoreInst>(DepInst)) {
1915     Value *StoredVal = DepSI->getValueOperand();
1916
1917     // The store and load are to a must-aliased pointer, but they may not
1918     // actually have the same type.  See if we know how to reuse the stored
1919     // value (depending on its type).
1920     if (StoredVal->getType() != L->getType()) {
1921       if (DL) {
1922         StoredVal = CoerceAvailableValueToLoadType(StoredVal, L->getType(),
1923                                                    L, *DL);
1924         if (!StoredVal)
1925           return false;
1926
1927         DEBUG(dbgs() << "GVN COERCED STORE:\n" << *DepSI << '\n' << *StoredVal
1928                      << '\n' << *L << "\n\n\n");
1929       }
1930       else
1931         return false;
1932     }
1933
1934     // Remove it!
1935     L->replaceAllUsesWith(StoredVal);
1936     if (StoredVal->getType()->getScalarType()->isPointerTy())
1937       MD->invalidateCachedPointerInfo(StoredVal);
1938     markInstructionForDeletion(L);
1939     ++NumGVNLoad;
1940     return true;
1941   }
1942
1943   if (LoadInst *DepLI = dyn_cast<LoadInst>(DepInst)) {
1944     Value *AvailableVal = DepLI;
1945
1946     // The loads are of a must-aliased pointer, but they may not actually have
1947     // the same type.  See if we know how to reuse the previously loaded value
1948     // (depending on its type).
1949     if (DepLI->getType() != L->getType()) {
1950       if (DL) {
1951         AvailableVal = CoerceAvailableValueToLoadType(DepLI, L->getType(),
1952                                                       L, *DL);
1953         if (!AvailableVal)
1954           return false;
1955
1956         DEBUG(dbgs() << "GVN COERCED LOAD:\n" << *DepLI << "\n" << *AvailableVal
1957                      << "\n" << *L << "\n\n\n");
1958       }
1959       else
1960         return false;
1961     }
1962
1963     // Remove it!
1964     patchAndReplaceAllUsesWith(L, AvailableVal);
1965     if (DepLI->getType()->getScalarType()->isPointerTy())
1966       MD->invalidateCachedPointerInfo(DepLI);
1967     markInstructionForDeletion(L);
1968     ++NumGVNLoad;
1969     return true;
1970   }
1971
1972   // If this load really doesn't depend on anything, then we must be loading an
1973   // undef value.  This can happen when loading for a fresh allocation with no
1974   // intervening stores, for example.
1975   if (isa<AllocaInst>(DepInst) || isMallocLikeFn(DepInst, TLI)) {
1976     L->replaceAllUsesWith(UndefValue::get(L->getType()));
1977     markInstructionForDeletion(L);
1978     ++NumGVNLoad;
1979     return true;
1980   }
1981
1982   // If this load occurs either right after a lifetime begin,
1983   // then the loaded value is undefined.
1984   if (IntrinsicInst *II = dyn_cast<IntrinsicInst>(DepInst)) {
1985     if (II->getIntrinsicID() == Intrinsic::lifetime_start) {
1986       L->replaceAllUsesWith(UndefValue::get(L->getType()));
1987       markInstructionForDeletion(L);
1988       ++NumGVNLoad;
1989       return true;
1990     }
1991   }
1992
1993   // If this load follows a calloc (which zero initializes memory),
1994   // then the loaded value is zero
1995   if (isCallocLikeFn(DepInst, TLI)) {
1996     L->replaceAllUsesWith(Constant::getNullValue(L->getType()));
1997     markInstructionForDeletion(L);
1998     ++NumGVNLoad;
1999     return true;
2000   }
2001
2002   return false;
2003 }
2004
2005 // findLeader - In order to find a leader for a given value number at a
2006 // specific basic block, we first obtain the list of all Values for that number,
2007 // and then scan the list to find one whose block dominates the block in
2008 // question.  This is fast because dominator tree queries consist of only
2009 // a few comparisons of DFS numbers.
2010 Value *GVN::findLeader(const BasicBlock *BB, uint32_t num) {
2011   LeaderTableEntry Vals = LeaderTable[num];
2012   if (!Vals.Val) return nullptr;
2013
2014   Value *Val = nullptr;
2015   if (DT->dominates(Vals.BB, BB)) {
2016     Val = Vals.Val;
2017     if (isa<Constant>(Val)) return Val;
2018   }
2019
2020   LeaderTableEntry* Next = Vals.Next;
2021   while (Next) {
2022     if (DT->dominates(Next->BB, BB)) {
2023       if (isa<Constant>(Next->Val)) return Next->Val;
2024       if (!Val) Val = Next->Val;
2025     }
2026
2027     Next = Next->Next;
2028   }
2029
2030   return Val;
2031 }
2032
2033 /// replaceAllDominatedUsesWith - Replace all uses of 'From' with 'To' if the
2034 /// use is dominated by the given basic block.  Returns the number of uses that
2035 /// were replaced.
2036 unsigned GVN::replaceAllDominatedUsesWith(Value *From, Value *To,
2037                                           const BasicBlockEdge &Root) {
2038   unsigned Count = 0;
2039   for (Value::use_iterator UI = From->use_begin(), UE = From->use_end();
2040        UI != UE; ) {
2041     Use &U = *UI++;
2042
2043     if (DT->dominates(Root, U)) {
2044       U.set(To);
2045       ++Count;
2046     }
2047   }
2048   return Count;
2049 }
2050
2051 /// isOnlyReachableViaThisEdge - There is an edge from 'Src' to 'Dst'.  Return
2052 /// true if every path from the entry block to 'Dst' passes via this edge.  In
2053 /// particular 'Dst' must not be reachable via another edge from 'Src'.
2054 static bool isOnlyReachableViaThisEdge(const BasicBlockEdge &E,
2055                                        DominatorTree *DT) {
2056   // While in theory it is interesting to consider the case in which Dst has
2057   // more than one predecessor, because Dst might be part of a loop which is
2058   // only reachable from Src, in practice it is pointless since at the time
2059   // GVN runs all such loops have preheaders, which means that Dst will have
2060   // been changed to have only one predecessor, namely Src.
2061   const BasicBlock *Pred = E.getEnd()->getSinglePredecessor();
2062   const BasicBlock *Src = E.getStart();
2063   assert((!Pred || Pred == Src) && "No edge between these basic blocks!");
2064   (void)Src;
2065   return Pred != nullptr;
2066 }
2067
2068 /// propagateEquality - The given values are known to be equal in every block
2069 /// dominated by 'Root'.  Exploit this, for example by replacing 'LHS' with
2070 /// 'RHS' everywhere in the scope.  Returns whether a change was made.
2071 bool GVN::propagateEquality(Value *LHS, Value *RHS,
2072                             const BasicBlockEdge &Root) {
2073   SmallVector<std::pair<Value*, Value*>, 4> Worklist;
2074   Worklist.push_back(std::make_pair(LHS, RHS));
2075   bool Changed = false;
2076   // For speed, compute a conservative fast approximation to
2077   // DT->dominates(Root, Root.getEnd());
2078   bool RootDominatesEnd = isOnlyReachableViaThisEdge(Root, DT);
2079
2080   while (!Worklist.empty()) {
2081     std::pair<Value*, Value*> Item = Worklist.pop_back_val();
2082     LHS = Item.first; RHS = Item.second;
2083
2084     if (LHS == RHS) continue;
2085     assert(LHS->getType() == RHS->getType() && "Equality but unequal types!");
2086
2087     // Don't try to propagate equalities between constants.
2088     if (isa<Constant>(LHS) && isa<Constant>(RHS)) continue;
2089
2090     // Prefer a constant on the right-hand side, or an Argument if no constants.
2091     if (isa<Constant>(LHS) || (isa<Argument>(LHS) && !isa<Constant>(RHS)))
2092       std::swap(LHS, RHS);
2093     assert((isa<Argument>(LHS) || isa<Instruction>(LHS)) && "Unexpected value!");
2094
2095     // If there is no obvious reason to prefer the left-hand side over the right-
2096     // hand side, ensure the longest lived term is on the right-hand side, so the
2097     // shortest lived term will be replaced by the longest lived.  This tends to
2098     // expose more simplifications.
2099     uint32_t LVN = VN.lookup_or_add(LHS);
2100     if ((isa<Argument>(LHS) && isa<Argument>(RHS)) ||
2101         (isa<Instruction>(LHS) && isa<Instruction>(RHS))) {
2102       // Move the 'oldest' value to the right-hand side, using the value number as
2103       // a proxy for age.
2104       uint32_t RVN = VN.lookup_or_add(RHS);
2105       if (LVN < RVN) {
2106         std::swap(LHS, RHS);
2107         LVN = RVN;
2108       }
2109     }
2110
2111     // If value numbering later sees that an instruction in the scope is equal
2112     // to 'LHS' then ensure it will be turned into 'RHS'.  In order to preserve
2113     // the invariant that instructions only occur in the leader table for their
2114     // own value number (this is used by removeFromLeaderTable), do not do this
2115     // if RHS is an instruction (if an instruction in the scope is morphed into
2116     // LHS then it will be turned into RHS by the next GVN iteration anyway, so
2117     // using the leader table is about compiling faster, not optimizing better).
2118     // The leader table only tracks basic blocks, not edges. Only add to if we
2119     // have the simple case where the edge dominates the end.
2120     if (RootDominatesEnd && !isa<Instruction>(RHS))
2121       addToLeaderTable(LVN, RHS, Root.getEnd());
2122
2123     // Replace all occurrences of 'LHS' with 'RHS' everywhere in the scope.  As
2124     // LHS always has at least one use that is not dominated by Root, this will
2125     // never do anything if LHS has only one use.
2126     if (!LHS->hasOneUse()) {
2127       unsigned NumReplacements = replaceAllDominatedUsesWith(LHS, RHS, Root);
2128       Changed |= NumReplacements > 0;
2129       NumGVNEqProp += NumReplacements;
2130     }
2131
2132     // Now try to deduce additional equalities from this one.  For example, if the
2133     // known equality was "(A != B)" == "false" then it follows that A and B are
2134     // equal in the scope.  Only boolean equalities with an explicit true or false
2135     // RHS are currently supported.
2136     if (!RHS->getType()->isIntegerTy(1))
2137       // Not a boolean equality - bail out.
2138       continue;
2139     ConstantInt *CI = dyn_cast<ConstantInt>(RHS);
2140     if (!CI)
2141       // RHS neither 'true' nor 'false' - bail out.
2142       continue;
2143     // Whether RHS equals 'true'.  Otherwise it equals 'false'.
2144     bool isKnownTrue = CI->isAllOnesValue();
2145     bool isKnownFalse = !isKnownTrue;
2146
2147     // If "A && B" is known true then both A and B are known true.  If "A || B"
2148     // is known false then both A and B are known false.
2149     Value *A, *B;
2150     if ((isKnownTrue && match(LHS, m_And(m_Value(A), m_Value(B)))) ||
2151         (isKnownFalse && match(LHS, m_Or(m_Value(A), m_Value(B))))) {
2152       Worklist.push_back(std::make_pair(A, RHS));
2153       Worklist.push_back(std::make_pair(B, RHS));
2154       continue;
2155     }
2156
2157     // If we are propagating an equality like "(A == B)" == "true" then also
2158     // propagate the equality A == B.  When propagating a comparison such as
2159     // "(A >= B)" == "true", replace all instances of "A < B" with "false".
2160     if (ICmpInst *Cmp = dyn_cast<ICmpInst>(LHS)) {
2161       Value *Op0 = Cmp->getOperand(0), *Op1 = Cmp->getOperand(1);
2162
2163       // If "A == B" is known true, or "A != B" is known false, then replace
2164       // A with B everywhere in the scope.
2165       if ((isKnownTrue && Cmp->getPredicate() == CmpInst::ICMP_EQ) ||
2166           (isKnownFalse && Cmp->getPredicate() == CmpInst::ICMP_NE))
2167         Worklist.push_back(std::make_pair(Op0, Op1));
2168
2169       // If "A >= B" is known true, replace "A < B" with false everywhere.
2170       CmpInst::Predicate NotPred = Cmp->getInversePredicate();
2171       Constant *NotVal = ConstantInt::get(Cmp->getType(), isKnownFalse);
2172       // Since we don't have the instruction "A < B" immediately to hand, work out
2173       // the value number that it would have and use that to find an appropriate
2174       // instruction (if any).
2175       uint32_t NextNum = VN.getNextUnusedValueNumber();
2176       uint32_t Num = VN.lookup_or_add_cmp(Cmp->getOpcode(), NotPred, Op0, Op1);
2177       // If the number we were assigned was brand new then there is no point in
2178       // looking for an instruction realizing it: there cannot be one!
2179       if (Num < NextNum) {
2180         Value *NotCmp = findLeader(Root.getEnd(), Num);
2181         if (NotCmp && isa<Instruction>(NotCmp)) {
2182           unsigned NumReplacements =
2183             replaceAllDominatedUsesWith(NotCmp, NotVal, Root);
2184           Changed |= NumReplacements > 0;
2185           NumGVNEqProp += NumReplacements;
2186         }
2187       }
2188       // Ensure that any instruction in scope that gets the "A < B" value number
2189       // is replaced with false.
2190       // The leader table only tracks basic blocks, not edges. Only add to if we
2191       // have the simple case where the edge dominates the end.
2192       if (RootDominatesEnd)
2193         addToLeaderTable(Num, NotVal, Root.getEnd());
2194
2195       continue;
2196     }
2197   }
2198
2199   return Changed;
2200 }
2201
2202 /// processInstruction - When calculating availability, handle an instruction
2203 /// by inserting it into the appropriate sets
2204 bool GVN::processInstruction(Instruction *I) {
2205   // Ignore dbg info intrinsics.
2206   if (isa<DbgInfoIntrinsic>(I))
2207     return false;
2208
2209   // If the instruction can be easily simplified then do so now in preference
2210   // to value numbering it.  Value numbering often exposes redundancies, for
2211   // example if it determines that %y is equal to %x then the instruction
2212   // "%z = and i32 %x, %y" becomes "%z = and i32 %x, %x" which we now simplify.
2213   if (Value *V = SimplifyInstruction(I, DL, TLI, DT)) {
2214     I->replaceAllUsesWith(V);
2215     if (MD && V->getType()->getScalarType()->isPointerTy())
2216       MD->invalidateCachedPointerInfo(V);
2217     markInstructionForDeletion(I);
2218     ++NumGVNSimpl;
2219     return true;
2220   }
2221
2222   if (LoadInst *LI = dyn_cast<LoadInst>(I)) {
2223     if (processLoad(LI))
2224       return true;
2225
2226     unsigned Num = VN.lookup_or_add(LI);
2227     addToLeaderTable(Num, LI, LI->getParent());
2228     return false;
2229   }
2230
2231   // For conditional branches, we can perform simple conditional propagation on
2232   // the condition value itself.
2233   if (BranchInst *BI = dyn_cast<BranchInst>(I)) {
2234     if (!BI->isConditional())
2235       return false;
2236
2237     if (isa<Constant>(BI->getCondition()))
2238       return processFoldableCondBr(BI);
2239
2240     Value *BranchCond = BI->getCondition();
2241     BasicBlock *TrueSucc = BI->getSuccessor(0);
2242     BasicBlock *FalseSucc = BI->getSuccessor(1);
2243     // Avoid multiple edges early.
2244     if (TrueSucc == FalseSucc)
2245       return false;
2246
2247     BasicBlock *Parent = BI->getParent();
2248     bool Changed = false;
2249
2250     Value *TrueVal = ConstantInt::getTrue(TrueSucc->getContext());
2251     BasicBlockEdge TrueE(Parent, TrueSucc);
2252     Changed |= propagateEquality(BranchCond, TrueVal, TrueE);
2253
2254     Value *FalseVal = ConstantInt::getFalse(FalseSucc->getContext());
2255     BasicBlockEdge FalseE(Parent, FalseSucc);
2256     Changed |= propagateEquality(BranchCond, FalseVal, FalseE);
2257
2258     return Changed;
2259   }
2260
2261   // For switches, propagate the case values into the case destinations.
2262   if (SwitchInst *SI = dyn_cast<SwitchInst>(I)) {
2263     Value *SwitchCond = SI->getCondition();
2264     BasicBlock *Parent = SI->getParent();
2265     bool Changed = false;
2266
2267     // Remember how many outgoing edges there are to every successor.
2268     SmallDenseMap<BasicBlock *, unsigned, 16> SwitchEdges;
2269     for (unsigned i = 0, n = SI->getNumSuccessors(); i != n; ++i)
2270       ++SwitchEdges[SI->getSuccessor(i)];
2271
2272     for (SwitchInst::CaseIt i = SI->case_begin(), e = SI->case_end();
2273          i != e; ++i) {
2274       BasicBlock *Dst = i.getCaseSuccessor();
2275       // If there is only a single edge, propagate the case value into it.
2276       if (SwitchEdges.lookup(Dst) == 1) {
2277         BasicBlockEdge E(Parent, Dst);
2278         Changed |= propagateEquality(SwitchCond, i.getCaseValue(), E);
2279       }
2280     }
2281     return Changed;
2282   }
2283
2284   // Instructions with void type don't return a value, so there's
2285   // no point in trying to find redundancies in them.
2286   if (I->getType()->isVoidTy()) return false;
2287
2288   uint32_t NextNum = VN.getNextUnusedValueNumber();
2289   unsigned Num = VN.lookup_or_add(I);
2290
2291   // Allocations are always uniquely numbered, so we can save time and memory
2292   // by fast failing them.
2293   if (isa<AllocaInst>(I) || isa<TerminatorInst>(I) || isa<PHINode>(I)) {
2294     addToLeaderTable(Num, I, I->getParent());
2295     return false;
2296   }
2297
2298   // If the number we were assigned was a brand new VN, then we don't
2299   // need to do a lookup to see if the number already exists
2300   // somewhere in the domtree: it can't!
2301   if (Num >= NextNum) {
2302     addToLeaderTable(Num, I, I->getParent());
2303     return false;
2304   }
2305
2306   // Perform fast-path value-number based elimination of values inherited from
2307   // dominators.
2308   Value *repl = findLeader(I->getParent(), Num);
2309   if (!repl) {
2310     // Failure, just remember this instance for future use.
2311     addToLeaderTable(Num, I, I->getParent());
2312     return false;
2313   }
2314
2315   // Remove it!
2316   patchAndReplaceAllUsesWith(I, repl);
2317   if (MD && repl->getType()->getScalarType()->isPointerTy())
2318     MD->invalidateCachedPointerInfo(repl);
2319   markInstructionForDeletion(I);
2320   return true;
2321 }
2322
2323 /// runOnFunction - This is the main transformation entry point for a function.
2324 bool GVN::runOnFunction(Function& F) {
2325   if (skipOptnoneFunction(F))
2326     return false;
2327
2328   if (!NoLoads)
2329     MD = &getAnalysis<MemoryDependenceAnalysis>();
2330   DT = &getAnalysis<DominatorTreeWrapperPass>().getDomTree();
2331   DataLayoutPass *DLP = getAnalysisIfAvailable<DataLayoutPass>();
2332   DL = DLP ? &DLP->getDataLayout() : nullptr;
2333   TLI = &getAnalysis<TargetLibraryInfo>();
2334   VN.setAliasAnalysis(&getAnalysis<AliasAnalysis>());
2335   VN.setMemDep(MD);
2336   VN.setDomTree(DT);
2337
2338   bool Changed = false;
2339   bool ShouldContinue = true;
2340
2341   // Merge unconditional branches, allowing PRE to catch more
2342   // optimization opportunities.
2343   for (Function::iterator FI = F.begin(), FE = F.end(); FI != FE; ) {
2344     BasicBlock *BB = FI++;
2345
2346     bool removedBlock = MergeBlockIntoPredecessor(BB, this);
2347     if (removedBlock) ++NumGVNBlocks;
2348
2349     Changed |= removedBlock;
2350   }
2351
2352   unsigned Iteration = 0;
2353   while (ShouldContinue) {
2354     DEBUG(dbgs() << "GVN iteration: " << Iteration << "\n");
2355     ShouldContinue = iterateOnFunction(F);
2356     Changed |= ShouldContinue;
2357     ++Iteration;
2358   }
2359
2360   if (EnablePRE) {
2361     // Fabricate val-num for dead-code in order to suppress assertion in
2362     // performPRE().
2363     assignValNumForDeadCode();
2364     bool PREChanged = true;
2365     while (PREChanged) {
2366       PREChanged = performPRE(F);
2367       Changed |= PREChanged;
2368     }
2369   }
2370
2371   // FIXME: Should perform GVN again after PRE does something.  PRE can move
2372   // computations into blocks where they become fully redundant.  Note that
2373   // we can't do this until PRE's critical edge splitting updates memdep.
2374   // Actually, when this happens, we should just fully integrate PRE into GVN.
2375
2376   cleanupGlobalSets();
2377   // Do not cleanup DeadBlocks in cleanupGlobalSets() as it's called for each
2378   // iteration. 
2379   DeadBlocks.clear();
2380
2381   return Changed;
2382 }
2383
2384
2385 bool GVN::processBlock(BasicBlock *BB) {
2386   // FIXME: Kill off InstrsToErase by doing erasing eagerly in a helper function
2387   // (and incrementing BI before processing an instruction).
2388   assert(InstrsToErase.empty() &&
2389          "We expect InstrsToErase to be empty across iterations");
2390   if (DeadBlocks.count(BB))
2391     return false;
2392
2393   bool ChangedFunction = false;
2394
2395   for (BasicBlock::iterator BI = BB->begin(), BE = BB->end();
2396        BI != BE;) {
2397     ChangedFunction |= processInstruction(BI);
2398     if (InstrsToErase.empty()) {
2399       ++BI;
2400       continue;
2401     }
2402
2403     // If we need some instructions deleted, do it now.
2404     NumGVNInstr += InstrsToErase.size();
2405
2406     // Avoid iterator invalidation.
2407     bool AtStart = BI == BB->begin();
2408     if (!AtStart)
2409       --BI;
2410
2411     for (SmallVectorImpl<Instruction *>::iterator I = InstrsToErase.begin(),
2412          E = InstrsToErase.end(); I != E; ++I) {
2413       DEBUG(dbgs() << "GVN removed: " << **I << '\n');
2414       if (MD) MD->removeInstruction(*I);
2415       DEBUG(verifyRemoved(*I));
2416       (*I)->eraseFromParent();
2417     }
2418     InstrsToErase.clear();
2419
2420     if (AtStart)
2421       BI = BB->begin();
2422     else
2423       ++BI;
2424   }
2425
2426   return ChangedFunction;
2427 }
2428
2429 /// performPRE - Perform a purely local form of PRE that looks for diamond
2430 /// control flow patterns and attempts to perform simple PRE at the join point.
2431 bool GVN::performPRE(Function &F) {
2432   bool Changed = false;
2433   SmallVector<std::pair<Value*, BasicBlock*>, 8> predMap;
2434   for (BasicBlock *CurrentBlock : depth_first(&F.getEntryBlock())) {
2435     // Nothing to PRE in the entry block.
2436     if (CurrentBlock == &F.getEntryBlock()) continue;
2437
2438     // Don't perform PRE on a landing pad.
2439     if (CurrentBlock->isLandingPad()) continue;
2440
2441     for (BasicBlock::iterator BI = CurrentBlock->begin(),
2442          BE = CurrentBlock->end(); BI != BE; ) {
2443       Instruction *CurInst = BI++;
2444
2445       if (isa<AllocaInst>(CurInst) ||
2446           isa<TerminatorInst>(CurInst) || isa<PHINode>(CurInst) ||
2447           CurInst->getType()->isVoidTy() ||
2448           CurInst->mayReadFromMemory() || CurInst->mayHaveSideEffects() ||
2449           isa<DbgInfoIntrinsic>(CurInst))
2450         continue;
2451
2452       // Don't do PRE on compares. The PHI would prevent CodeGenPrepare from
2453       // sinking the compare again, and it would force the code generator to
2454       // move the i1 from processor flags or predicate registers into a general
2455       // purpose register.
2456       if (isa<CmpInst>(CurInst))
2457         continue;
2458
2459       // We don't currently value number ANY inline asm calls.
2460       if (CallInst *CallI = dyn_cast<CallInst>(CurInst))
2461         if (CallI->isInlineAsm())
2462           continue;
2463
2464       uint32_t ValNo = VN.lookup(CurInst);
2465
2466       // Look for the predecessors for PRE opportunities.  We're
2467       // only trying to solve the basic diamond case, where
2468       // a value is computed in the successor and one predecessor,
2469       // but not the other.  We also explicitly disallow cases
2470       // where the successor is its own predecessor, because they're
2471       // more complicated to get right.
2472       unsigned NumWith = 0;
2473       unsigned NumWithout = 0;
2474       BasicBlock *PREPred = nullptr;
2475       predMap.clear();
2476
2477       for (pred_iterator PI = pred_begin(CurrentBlock),
2478            PE = pred_end(CurrentBlock); PI != PE; ++PI) {
2479         BasicBlock *P = *PI;
2480         // We're not interested in PRE where the block is its
2481         // own predecessor, or in blocks with predecessors
2482         // that are not reachable.
2483         if (P == CurrentBlock) {
2484           NumWithout = 2;
2485           break;
2486         } else if (!DT->isReachableFromEntry(P))  {
2487           NumWithout = 2;
2488           break;
2489         }
2490
2491         Value* predV = findLeader(P, ValNo);
2492         if (!predV) {
2493           predMap.push_back(std::make_pair(static_cast<Value *>(nullptr), P));
2494           PREPred = P;
2495           ++NumWithout;
2496         } else if (predV == CurInst) {
2497           /* CurInst dominates this predecessor. */
2498           NumWithout = 2;
2499           break;
2500         } else {
2501           predMap.push_back(std::make_pair(predV, P));
2502           ++NumWith;
2503         }
2504       }
2505
2506       // Don't do PRE when it might increase code size, i.e. when
2507       // we would need to insert instructions in more than one pred.
2508       if (NumWithout != 1 || NumWith == 0)
2509         continue;
2510
2511       // Don't do PRE across indirect branch.
2512       if (isa<IndirectBrInst>(PREPred->getTerminator()))
2513         continue;
2514
2515       // We can't do PRE safely on a critical edge, so instead we schedule
2516       // the edge to be split and perform the PRE the next time we iterate
2517       // on the function.
2518       unsigned SuccNum = GetSuccessorNumber(PREPred, CurrentBlock);
2519       if (isCriticalEdge(PREPred->getTerminator(), SuccNum)) {
2520         toSplit.push_back(std::make_pair(PREPred->getTerminator(), SuccNum));
2521         continue;
2522       }
2523
2524       // Instantiate the expression in the predecessor that lacked it.
2525       // Because we are going top-down through the block, all value numbers
2526       // will be available in the predecessor by the time we need them.  Any
2527       // that weren't originally present will have been instantiated earlier
2528       // in this loop.
2529       Instruction *PREInstr = CurInst->clone();
2530       bool success = true;
2531       for (unsigned i = 0, e = CurInst->getNumOperands(); i != e; ++i) {
2532         Value *Op = PREInstr->getOperand(i);
2533         if (isa<Argument>(Op) || isa<Constant>(Op) || isa<GlobalValue>(Op))
2534           continue;
2535
2536         if (Value *V = findLeader(PREPred, VN.lookup(Op))) {
2537           PREInstr->setOperand(i, V);
2538         } else {
2539           success = false;
2540           break;
2541         }
2542       }
2543
2544       // Fail out if we encounter an operand that is not available in
2545       // the PRE predecessor.  This is typically because of loads which
2546       // are not value numbered precisely.
2547       if (!success) {
2548         DEBUG(verifyRemoved(PREInstr));
2549         delete PREInstr;
2550         continue;
2551       }
2552
2553       PREInstr->insertBefore(PREPred->getTerminator());
2554       PREInstr->setName(CurInst->getName() + ".pre");
2555       PREInstr->setDebugLoc(CurInst->getDebugLoc());
2556       VN.add(PREInstr, ValNo);
2557       ++NumGVNPRE;
2558
2559       // Update the availability map to include the new instruction.
2560       addToLeaderTable(ValNo, PREInstr, PREPred);
2561
2562       // Create a PHI to make the value available in this block.
2563       PHINode* Phi = PHINode::Create(CurInst->getType(), predMap.size(),
2564                                      CurInst->getName() + ".pre-phi",
2565                                      CurrentBlock->begin());
2566       for (unsigned i = 0, e = predMap.size(); i != e; ++i) {
2567         if (Value *V = predMap[i].first)
2568           Phi->addIncoming(V, predMap[i].second);
2569         else
2570           Phi->addIncoming(PREInstr, PREPred);
2571       }
2572
2573       VN.add(Phi, ValNo);
2574       addToLeaderTable(ValNo, Phi, CurrentBlock);
2575       Phi->setDebugLoc(CurInst->getDebugLoc());
2576       CurInst->replaceAllUsesWith(Phi);
2577       if (Phi->getType()->getScalarType()->isPointerTy()) {
2578         // Because we have added a PHI-use of the pointer value, it has now
2579         // "escaped" from alias analysis' perspective.  We need to inform
2580         // AA of this.
2581         for (unsigned ii = 0, ee = Phi->getNumIncomingValues(); ii != ee;
2582              ++ii) {
2583           unsigned jj = PHINode::getOperandNumForIncomingValue(ii);
2584           VN.getAliasAnalysis()->addEscapingUse(Phi->getOperandUse(jj));
2585         }
2586
2587         if (MD)
2588           MD->invalidateCachedPointerInfo(Phi);
2589       }
2590       VN.erase(CurInst);
2591       removeFromLeaderTable(ValNo, CurInst, CurrentBlock);
2592
2593       DEBUG(dbgs() << "GVN PRE removed: " << *CurInst << '\n');
2594       if (MD) MD->removeInstruction(CurInst);
2595       DEBUG(verifyRemoved(CurInst));
2596       CurInst->eraseFromParent();
2597       Changed = true;
2598     }
2599   }
2600
2601   if (splitCriticalEdges())
2602     Changed = true;
2603
2604   return Changed;
2605 }
2606
2607 /// Split the critical edge connecting the given two blocks, and return
2608 /// the block inserted to the critical edge.
2609 BasicBlock *GVN::splitCriticalEdges(BasicBlock *Pred, BasicBlock *Succ) {
2610   BasicBlock *BB = SplitCriticalEdge(Pred, Succ, this);
2611   if (MD)
2612     MD->invalidateCachedPredecessors();
2613   return BB;
2614 }
2615
2616 /// splitCriticalEdges - Split critical edges found during the previous
2617 /// iteration that may enable further optimization.
2618 bool GVN::splitCriticalEdges() {
2619   if (toSplit.empty())
2620     return false;
2621   do {
2622     std::pair<TerminatorInst*, unsigned> Edge = toSplit.pop_back_val();
2623     SplitCriticalEdge(Edge.first, Edge.second, this);
2624   } while (!toSplit.empty());
2625   if (MD) MD->invalidateCachedPredecessors();
2626   return true;
2627 }
2628
2629 /// iterateOnFunction - Executes one iteration of GVN
2630 bool GVN::iterateOnFunction(Function &F) {
2631   cleanupGlobalSets();
2632
2633   // Top-down walk of the dominator tree
2634   bool Changed = false;
2635 #if 0
2636   // Needed for value numbering with phi construction to work.
2637   ReversePostOrderTraversal<Function*> RPOT(&F);
2638   for (ReversePostOrderTraversal<Function*>::rpo_iterator RI = RPOT.begin(),
2639        RE = RPOT.end(); RI != RE; ++RI)
2640     Changed |= processBlock(*RI);
2641 #else
2642   // Save the blocks this function have before transformation begins. GVN may
2643   // split critical edge, and hence may invalidate the RPO/DT iterator.
2644   //
2645   std::vector<BasicBlock *> BBVect;
2646   BBVect.reserve(256);
2647   for (DomTreeNode *x : depth_first(DT->getRootNode()))
2648     BBVect.push_back(x->getBlock());
2649
2650   for (std::vector<BasicBlock *>::iterator I = BBVect.begin(), E = BBVect.end();
2651        I != E; I++)
2652     Changed |= processBlock(*I);
2653 #endif
2654
2655   return Changed;
2656 }
2657
2658 void GVN::cleanupGlobalSets() {
2659   VN.clear();
2660   LeaderTable.clear();
2661   TableAllocator.Reset();
2662 }
2663
2664 /// verifyRemoved - Verify that the specified instruction does not occur in our
2665 /// internal data structures.
2666 void GVN::verifyRemoved(const Instruction *Inst) const {
2667   VN.verifyRemoved(Inst);
2668
2669   // Walk through the value number scope to make sure the instruction isn't
2670   // ferreted away in it.
2671   for (DenseMap<uint32_t, LeaderTableEntry>::const_iterator
2672        I = LeaderTable.begin(), E = LeaderTable.end(); I != E; ++I) {
2673     const LeaderTableEntry *Node = &I->second;
2674     assert(Node->Val != Inst && "Inst still in value numbering scope!");
2675
2676     while (Node->Next) {
2677       Node = Node->Next;
2678       assert(Node->Val != Inst && "Inst still in value numbering scope!");
2679     }
2680   }
2681 }
2682
2683 // BB is declared dead, which implied other blocks become dead as well. This
2684 // function is to add all these blocks to "DeadBlocks". For the dead blocks'
2685 // live successors, update their phi nodes by replacing the operands
2686 // corresponding to dead blocks with UndefVal.
2687 //
2688 void GVN::addDeadBlock(BasicBlock *BB) {
2689   SmallVector<BasicBlock *, 4> NewDead;
2690   SmallSetVector<BasicBlock *, 4> DF;
2691
2692   NewDead.push_back(BB);
2693   while (!NewDead.empty()) {
2694     BasicBlock *D = NewDead.pop_back_val();
2695     if (DeadBlocks.count(D))
2696       continue;
2697
2698     // All blocks dominated by D are dead.
2699     SmallVector<BasicBlock *, 8> Dom;
2700     DT->getDescendants(D, Dom);
2701     DeadBlocks.insert(Dom.begin(), Dom.end());
2702     
2703     // Figure out the dominance-frontier(D).
2704     for (SmallVectorImpl<BasicBlock *>::iterator I = Dom.begin(),
2705            E = Dom.end(); I != E; I++) {
2706       BasicBlock *B = *I;
2707       for (succ_iterator SI = succ_begin(B), SE = succ_end(B); SI != SE; SI++) {
2708         BasicBlock *S = *SI;
2709         if (DeadBlocks.count(S))
2710           continue;
2711
2712         bool AllPredDead = true;
2713         for (pred_iterator PI = pred_begin(S), PE = pred_end(S); PI != PE; PI++)
2714           if (!DeadBlocks.count(*PI)) {
2715             AllPredDead = false;
2716             break;
2717           }
2718
2719         if (!AllPredDead) {
2720           // S could be proved dead later on. That is why we don't update phi
2721           // operands at this moment.
2722           DF.insert(S);
2723         } else {
2724           // While S is not dominated by D, it is dead by now. This could take
2725           // place if S already have a dead predecessor before D is declared
2726           // dead.
2727           NewDead.push_back(S);
2728         }
2729       }
2730     }
2731   }
2732
2733   // For the dead blocks' live successors, update their phi nodes by replacing
2734   // the operands corresponding to dead blocks with UndefVal.
2735   for(SmallSetVector<BasicBlock *, 4>::iterator I = DF.begin(), E = DF.end();
2736         I != E; I++) {
2737     BasicBlock *B = *I;
2738     if (DeadBlocks.count(B))
2739       continue;
2740
2741     SmallVector<BasicBlock *, 4> Preds(pred_begin(B), pred_end(B));
2742     for (SmallVectorImpl<BasicBlock *>::iterator PI = Preds.begin(),
2743            PE = Preds.end(); PI != PE; PI++) {
2744       BasicBlock *P = *PI;
2745
2746       if (!DeadBlocks.count(P))
2747         continue;
2748
2749       if (isCriticalEdge(P->getTerminator(), GetSuccessorNumber(P, B))) {
2750         if (BasicBlock *S = splitCriticalEdges(P, B))
2751           DeadBlocks.insert(P = S);
2752       }
2753
2754       for (BasicBlock::iterator II = B->begin(); isa<PHINode>(II); ++II) {
2755         PHINode &Phi = cast<PHINode>(*II);
2756         Phi.setIncomingValue(Phi.getBasicBlockIndex(P),
2757                              UndefValue::get(Phi.getType()));
2758       }
2759     }
2760   }
2761 }
2762
2763 // If the given branch is recognized as a foldable branch (i.e. conditional
2764 // branch with constant condition), it will perform following analyses and
2765 // transformation.
2766 //  1) If the dead out-coming edge is a critical-edge, split it. Let 
2767 //     R be the target of the dead out-coming edge.
2768 //  1) Identify the set of dead blocks implied by the branch's dead outcoming
2769 //     edge. The result of this step will be {X| X is dominated by R}
2770 //  2) Identify those blocks which haves at least one dead prodecessor. The
2771 //     result of this step will be dominance-frontier(R).
2772 //  3) Update the PHIs in DF(R) by replacing the operands corresponding to 
2773 //     dead blocks with "UndefVal" in an hope these PHIs will optimized away.
2774 //
2775 // Return true iff *NEW* dead code are found.
2776 bool GVN::processFoldableCondBr(BranchInst *BI) {
2777   if (!BI || BI->isUnconditional())
2778     return false;
2779
2780   ConstantInt *Cond = dyn_cast<ConstantInt>(BI->getCondition());
2781   if (!Cond)
2782     return false;
2783
2784   BasicBlock *DeadRoot = Cond->getZExtValue() ? 
2785                          BI->getSuccessor(1) : BI->getSuccessor(0);
2786   if (DeadBlocks.count(DeadRoot))
2787     return false;
2788
2789   if (!DeadRoot->getSinglePredecessor())
2790     DeadRoot = splitCriticalEdges(BI->getParent(), DeadRoot);
2791
2792   addDeadBlock(DeadRoot);
2793   return true;
2794 }
2795
2796 // performPRE() will trigger assert if it comes across an instruction without
2797 // associated val-num. As it normally has far more live instructions than dead
2798 // instructions, it makes more sense just to "fabricate" a val-number for the
2799 // dead code than checking if instruction involved is dead or not.
2800 void GVN::assignValNumForDeadCode() {
2801   for (SetVector<BasicBlock *>::iterator I = DeadBlocks.begin(),
2802         E = DeadBlocks.end(); I != E; I++) {
2803     BasicBlock *BB = *I;
2804     for (BasicBlock::iterator II = BB->begin(), EE = BB->end();
2805           II != EE; II++) {
2806       Instruction *Inst = &*II;
2807       unsigned ValNum = VN.lookup_or_add(Inst);
2808       addToLeaderTable(ValNum, Inst, BB);
2809     }
2810   }
2811 }