README.md: point non-git users to gitweb

[model-checker.git] / README.md

CDSChecker Readme
=================

Copyright © 2013 Regents of the University of California. All rights reserved.

CDSChecker is distributed under the GPL v2. See the LICENSE file for details.


Overview
--------

CDSChecker is a model checker for C11/C++11 which exhaustively explores the
behaviors of code under the C/C++ memory model. It uses partial order reduction
as well as a few other novel techniques to eliminate time spent on redundant
execution behaviors and to significantly shrink the state space. The model
checking algorithm is described in more detail in this paper (published in
OOPSLA '13):

>   <http://demsky.eecs.uci.edu/publications/c11modelcheck.pdf>

It is designed to support unit tests on concurrent data structure written using
C/C++ atomics.

CDSChecker is constructed as a dynamically-linked shared library which
implements the C and C++ atomic types and portions of the other thread-support
libraries of C/C++ (e.g., std::atomic, std::mutex, etc.). Notably, we only
support the C version of threads (i.e., `thrd_t` and similar, from `<threads.h>`),
because C++ threads require features which are only available to a C++11
compiler (and we want to support others, at least for now).

CDSChecker should compile on Linux and Mac OSX with no dependencies and has been
tested with LLVM (clang/clang++) and GCC. It likely can be ported to other \*NIX
flavors. We have not attempted to port to Windows.


Getting Started
---------------

If you haven't done so already, you may download CDSChecker using
[git](http://git-scm.com/) (for those without git, snapshots can be found at the
Gitweb URLs below):

      git clone git://demsky.eecs.uci.edu/model-checker.git

Get the benchmarks (not required; distributed separately):

      cd model-checker
      git clone git://demsky.eecs.uci.edu/model-checker-benchmarks.git benchmarks

Compile the model checker:

      make

Compile the benchmarks:

      make benchmarks

Run a simple example (the `run.sh` script does some very minimal processing for
you):

      ./run.sh test/userprog.o

To see the help message on how to run CDSChecker, execute:

      ./run.sh -h


Useful Options
--------------

`-m num`

  > Controls the liveness of the memory system. Note that multithreaded programs
  > often rely on memory liveness for termination, so this parameter is
  > necessary for such programs.
  >
  > Liveness is controlled by `num`: the number of times a load is allowed to
  > see the same store when a newer store exists---one that is ordered later in
  > the modification order.

`-y`

  > Turns on CHESS-like yield-based fairness support (requires `thrd_yield()`
  > instrumentation in test program).

`-f num`

  > Turns on alternative fairness support (less desirable than `-y`).

`-v`

  > Verbose: show all executions and not just buggy ones.

`-s num`

  > Constrain how long we will run to wait for a future value past when it is
  > expected

`-u num`

  > Value to provide to atomics loads from uninitialized memory locations. The
  > default is 0, but this may cause some programs to throw exceptions
  > (segfault) before the model checker prints a trace.

Suggested options:

>     -m 2 -y

or

>     -m 2 -f 10


Benchmarks
-------------------

Many simple tests are located in the `tests/` directory. You may also want to
try the larger benchmarks (distributed separately), which can be placed under
the `benchmarks/` directory. After building CDSChecker, you can build and run
the benchmarks as follows:

>     make benchmarks
>     cd benchmarks
>     ./run.sh barrier/barrier -y -m 2     # runs barrier test with fairness/memory liveness
>     ./bench.sh                           # run all benchmarks and provide timing results


Running your own code
---------------------

You likely want to test your own code, not just our simple tests. To do so, you
need to perform a few steps.

First, because CDSChecker executes your program dozens (if not hundreds or
thousands) of times, you will have the most success if your code is written as a
unit test and not as a full-blown program.

Second, because CDSChecker must be able to manage your program for you, your
program should declare its main entry point as `user_main(int, char**)` rather
than `main(int, char**)`.

Third, test programs should use the standard C11/C++11 library headers
(`<atomic>`/`<stdatomic.h>`, `<mutex>`, `<condition_variable>`, `<thread.h>`).
As of now, we only support C11 thread syntax (`thrd_t`, etc. from
`<thread.h>`).

Test programs may also use our included happens-before race detector by
including <librace.h> and utilizing the appropriate functions
(`store_{8,16,32,64}()` and `load_{8,16,32,64}()`) for loading/storing data from/to
non-atomic shared memory.

CDSChecker can also check boolean assertions in your test programs. Just
include `<model-assert.h>` and use the `MODEL_ASSERT()` macro in your test program.
CDSChecker will report a bug in any possible execution in which the argument to
`MODEL_ASSERT()` evaluates to false (that is, 0).

Test programs should be compiled against our shared library (libmodel.so) using
the headers in the `include/` directory. Then the shared library must be made
available to the dynamic linker, using the `LD_LIBRARY_PATH` environment
variable, for instance.


Reading an execution trace
--------------------------

When CDSChecker detects a bug in your program (or when run with the `--verbose`
flag), it prints the output of the program run (STDOUT) along with some summary
trace information for the execution in question. The trace is given as a
sequence of lines, where each line represents an operation in the execution
trace. These lines are ordered by the order in which they were run by CDSChecker
(i.e., the "execution order"), which does not necessarily align with the "order"
of the values observed (i.e., the modification order or the reads-from
relation).

The following list describes each of the columns in the execution trace output:

 * \#: The sequence number within the execution. That is, sequence number "9"
   means the operation was the 9th operation executed by CDSChecker. Note that
   this represents the execution order, not necessarily any other order (e.g.,
   modification order or reads-from).

 * t: The thread number

 * Action type: The type of operation performed

 * MO: The memory-order for this operation (i.e., `memory_order_XXX`, where `XXX` is
   `relaxed`, `release`, `acquire`, `rel_acq`, or `seq_cst`)

 * Location: The memory location on which this operation is operating. This is
   well-defined for atomic write/read/RMW, but other operations are subject to
   CDSChecker implementation details.

 * Value: For reads/writes/RMW, the value returned by the operation. Note that
   for RMW, this is the value that is *read*, not the value that was *written*.
   For other operations, 'value' may have some CDSChecker-internal meaning, or
   it may simply be a don't-care (such as `0xdeadbeef`).

 * Rf: For reads, the sequence number of the operation from which it reads.
   [Note: If the execution is a partial, infeasible trace (labeled INFEASIBLE),
   as printed during `--verbose` execution, reads may not be resolved and so may
   have Rf=? or Rf=Px, where x is a promised future value.]

 * CV: The clock vector, encapsulating the happens-before relation (see our
   paper, or the C/C++ memory model itself). We use a Lamport-style clock vector
   similar to [1]. The "clock" is just the sequence number (#). The clock vector
   can be read as follows:

   Each entry is indexed as CV[i], where

            i = 0, 1, 2, ..., <number of threads>

   So for any thread i, we say CV[i] is the sequence number of the most recent
   operation in thread i such that operation i happens-before this operation.
   Notably, thread 0 is reserved as a dummy thread for certain CDSChecker
   operations.

See the following example trace:

<pre>
------------------------------------------------------------------------------------
#    t    Action type     MO       Location         Value               Rf  CV
------------------------------------------------------------------------------------
1    1    thread start    seq_cst  0x7f68ff11e7c0   0xdeadbeef              ( 0,  1)
2    1    init atomic     relaxed        0x601068   0                       ( 0,  2)
3    1    init atomic     relaxed        0x60106c   0                       ( 0,  3)
4    1    thread create   seq_cst  0x7f68fe51c710   0x7f68fe51c6e0          ( 0,  4)
5    2    thread start    seq_cst  0x7f68ff11ebc0   0xdeadbeef              ( 0,  4,  5)
6    2    atomic read     relaxed        0x60106c   0                   3   ( 0,  4,  6)
7    1    thread create   seq_cst  0x7f68fe51c720   0x7f68fe51c6e0          ( 0,  7)
8    3    thread start    seq_cst  0x7f68ff11efc0   0xdeadbeef              ( 0,  7,  0,  8)
9    2    atomic write    relaxed        0x601068   0                       ( 0,  4,  9)
10   3    atomic read     relaxed        0x601068   0                   2   ( 0,  7,  0, 10)
11   2    thread finish   seq_cst  0x7f68ff11ebc0   0xdeadbeef              ( 0,  4, 11)
12   3    atomic write    relaxed        0x60106c   0x2a                    ( 0,  7,  0, 12)
13   1    thread join     seq_cst  0x7f68ff11ebc0   0x2                     ( 0, 13, 11)
14   3    thread finish   seq_cst  0x7f68ff11efc0   0xdeadbeef              ( 0,  7,  0, 14)
15   1    thread join     seq_cst  0x7f68ff11efc0   0x3                     ( 0, 15, 11, 14)
16   1    thread finish   seq_cst  0x7f68ff11e7c0   0xdeadbeef              ( 0, 16, 11, 14)
HASH 4073708854
------------------------------------------------------------------------------------
</pre>

Now consider, for example, operation 10:

This is the 10th operation in the execution order. It is an atomic read-relaxed
operation performed by thread 3 at memory address `0x601068`. It reads the value
"0", which was written by the 2nd operation in the execution order. Its clock
vector consists of the following values:

        CV[0] = 0, CV[1] = 7, CV[2] = 0, CV[3] = 10


Other Notes
-----------

* Deadlock detection: CDSChecker can detect deadlocks. For instance, try the
  following test program.

  >     ./run.sh test/deadlock.o

  Deadlock detection currently detects when a thread is about to step into a
  deadlock, without actually including the final step in the trace. But you can
  examine the program to see the next step.

* CDSChecker has to speculatively explore many execution behaviors due to the
  relaxed memory model, and many of these turn out to be infeasible (that is,
  they cannot be legally produced by the memory model). CDSChecker discards
  these executions as soon as it identifies them (see the "Number of infeasible
  executions" statistic); however, the speculation can occasionally cause
  CDSChecker to hit unexpected parts of the unit test program (causing a
  division by 0, for instance). In such programs, you might consider running
  CDSChecker with the `-u num` option.


See Also
--------

The CDSChecker project page:

>   <http://demsky.eecs.uci.edu/c11modelchecker.php>

The CDSChecker source and accompanying benchmarks on Gitweb:

>   <http://demsky.eecs.uci.edu/git/?p=model-checker.git>
>
>   <http://demsky.eecs.uci.edu/git/?p=model-checker-benchmarks.git>


Contact
-------

Please feel free to contact us for more information. Bug reports are welcome,
and we are happy to hear from our users. We are also very interested to know if
CDSChecker catches bugs in your programs.

Contact Brian Norris at <banorris@uci.edu> or Brian Demsky at <bdemsky@uci.edu>.


References
----------

[1] L. Lamport. Time, clocks, and the ordering of events in a distributed
    system. CACM, 21(7):558-565, July 1978.