Merge remote-tracking branch 'remotes/aosp/android-3.0' into develop-3.0

Conflicts:
drivers/mmc/card/block.c
drivers/net/usb/asix.c
drivers/net/wireless/airo.c
drivers/net/wireless/ath/ath5k/base.c
drivers/net/wireless/ath/ath9k/ar9002_calib.c
drivers/net/wireless/ath/ath9k/ar9002_hw.c
drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
drivers/net/wireless/ath/ath9k/ar9003_hw.c
drivers/net/wireless/ath/ath9k/ar9003_phy.h
drivers/net/wireless/ath/ath9k/hw.c
drivers/net/wireless/ath/ath9k/hw.h
drivers/net/wireless/ath/ath9k/init.c
drivers/net/wireless/ath/ath9k/main.c
drivers/net/wireless/ath/ath9k/pci.c
drivers/net/wireless/b43/main.c
drivers/net/wireless/hostap/hostap_main.c
drivers/net/wireless/iwlwifi/iwl-5000.c
drivers/net/wireless/iwlwifi/iwl-agn.c
drivers/net/wireless/iwlwifi/iwl-core.h
drivers/net/wireless/iwlwifi/iwl-power.c
drivers/net/wireless/iwlwifi/iwl-scan.c
drivers/net/wireless/iwlwifi/iwl-tx.c
drivers/net/wireless/rt2x00/rt2800lib.c
drivers/net/wireless/rt2x00/rt2800usb.c
drivers/net/wireless/rt2x00/rt2x00mac.c
drivers/net/wireless/rt2x00/rt2x00queue.c
drivers/net/wireless/rt2x00/rt2x00queue.h
drivers/net/wireless/rt2x00/rt2x00usb.c
drivers/usb/serial/option.c

input: gsensor: mma8452: initialize data early

fix this bug:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
PC is at __mutex_lock_slowpath+0x4c/0x154
LR is at mma8452_get_data+0x1fc/0x238
[<c07e4f2c>] (__mutex_lock_slowpath+0x4c/0x154) from [<c066d9c4>] (mma8452_get_data+0x1fc/0x238)
[<c066d9c4>] (mma8452_get_data+0x1fc/0x238) from [<c066da10>] (mma8452_delaywork_func+0x10/0x30)
[<c066da10>] (mma8452_delaywork_func+0x10/0x30) from [<c0466600>] (process_one_work+0x258/0x3ac)
[<c0466600>] (process_one_work+0x258/0x3ac) from [<c0468f60>] (worker_thread+0x238/0x440)
[<c0468f60>] (worker_thread+0x238/0x440) from [<c046c9ac>] (kthread+0x80/0x88)
[<c046c9ac>] (kthread+0x80/0x88) from [<c0433190>] (kernel_thread_exit+0x0/0x8)

rm rk2818 dma change

rk29: rm old vpu driver

rk29: memory.h: use ARM_DMA_ZONE_SIZE to adjust the zone sizes

rk29: clock: fix warning: 'actual' may be used uninitialized in this function

regulator: rk29-pwm-regulator: fix warning: initialization from incompatible pointer type

power: bq27510_battery: fix warning: initialization from incompatible pointer type

net: wireless: wifi_sys: fix warning: initialization from incompatible pointer type

rk29_modem: fix warning: initialization from incompatible pointer type

input: gsensor: mma8452: fix warning: initialization from incompatible pointer type

bluetooth: vflash: fix warning: initialization from incompatible pointer type

usb: serial: option: fix warning: "CINTERION_VENDOR_ID" redefined

input: touchscreen: eeti_egalax_i2c: fix warning: initialization from incompatible pointer type

net: wireless: bcm4329: Skip dhd_bus_stop() if bus is already down

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

net: wireless: bcmdhd: Skip dhd_bus_stop() if bus is already down

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

net: wireless: bcmdhd: Improve suspend/resume processing

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

net: wireless: bcmdhd: Check if FW is Ok for internal FW call

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

Revert "temp rename asix for merge 3.0"

This reverts commit 3c3de0df8bb4f8a278bd78ac6852805949dbb8e4.

Revert "temp revert rk change"

This reverts commit 15f7fabcb88e67792e49279de0b28d70fcfca0cd.

Conflicts:

.gitignore
arch/arm/boot/compressed/head.S
arch/arm/common/gic.c
arch/arm/kernel/Makefile
arch/arm/mm/proc-v7.S
arch/arm/tools/mach-types
arch/arm/vfp/vfphw.S
drivers/Kconfig
drivers/Makefile
drivers/char/Makefile
drivers/cpufreq/cpufreq_ondemand.c
drivers/gpio/gpiolib.c
drivers/gpio/tps65910-gpio.c
drivers/input/Makefile
drivers/input/keyboard/Kconfig
drivers/input/keyboard/Makefile
drivers/input/touchscreen/Kconfig
drivers/media/video/Makefile
drivers/media/video/ov2640.c
drivers/media/video/soc_camera.c
drivers/media/video/uvc/uvc_v4l2.c
drivers/media/video/v4l2-ioctl.c
drivers/mfd/Kconfig
drivers/mfd/Makefile
drivers/mfd/wm831x-core.c
drivers/mfd/wm831x-i2c.c
drivers/mfd/wm831x-irq.c
drivers/mfd/wm831x-spi.c
drivers/mfd/wm8994-core.c
drivers/misc/Kconfig
drivers/misc/Makefile
drivers/misc/pmem.c
drivers/mmc/card/block.c
drivers/mmc/core/core.c
drivers/mmc/core/mmc.c
drivers/mmc/core/sd.c
drivers/mmc/core/sdio.c
drivers/mmc/host/Makefile
drivers/net/wireless/Kconfig
drivers/net/wireless/Makefile
drivers/net/wireless/bcm4329/bcmsdh_linux.c
drivers/net/wireless/bcm4329/dhd.h
drivers/net/wireless/bcm4329/dhd_linux.c
drivers/net/wireless/bcm4329/wl_iw.c
drivers/net/wireless/bcm4329/wl_iw.h
drivers/power/wm831x_power.c
drivers/regulator/Makefile
drivers/regulator/core.c
drivers/regulator/tps65910-regulator.c
drivers/regulator/wm831x-dcdc.c
drivers/regulator/wm831x-isink.c
drivers/regulator/wm831x-ldo.c
drivers/rtc/Kconfig
drivers/rtc/Makefile
drivers/serial/Kconfig
drivers/serial/Makefile
drivers/staging/Kconfig
drivers/staging/Makefile
drivers/usb/Makefile
drivers/usb/gadget/Kconfig
drivers/usb/gadget/android.c
drivers/usb/gadget/f_mass_storage.c
drivers/usb/serial/option.c
drivers/video/backlight/wm831x_bl.c
fs/fat/dir.c
fs/fat/fatent.c
fs/fat/inode.c
fs/yaffs2/yaffs_fs.c
fs/yaffs2/yaffs_mtdif2.c
include/linux/i2c.h
include/linux/mfd/wm831x/core.h
include/linux/mfd/wm831x/pdata.h
include/linux/mfd/wm8994/core.h
include/linux/mfd/wm8994/pdata.h
include/linux/regulator/consumer.h
include/media/v4l2-chip-ident.h
kernel/power/earlysuspend.c
kernel/power/wakelock.c
kernel/sys.c
mm/page_alloc.c
sound/soc/codecs/Kconfig
sound/soc/codecs/Makefile
sound/soc/codecs/wm8900.c
sound/soc/codecs/wm8988.c
sound/soc/codecs/wm8994.c
sound/soc/codecs/wm8994.h
sound/soc/codecs/wm_hubs.c
sound/soc/soc-cache.c

tcp: Don't nuke connections for the wrong protocol

Currently, calling tcp_nuke_addr to reset IPv6 connections
resets IPv4 connections as well, because all Android
framework sockets are dual-stack (i.e., IPv6) sockets, and
we don't check the source address to see if the connection
was in fact an IPv4 connection.

Fix this by checking the source address and not resetting
the connection if it's a mapped address.

Also slightly tweak the IPv4 code path, which doesn't check
for mapped addresses either. This was not causing any
problems because tcp_is_local normally always returns true
for LOOPBACK4_IPV6 (127.0.0.6), because the loopback
interface is configured as as 127.0.0.0/8. However,
checking explicitly for LOOPBACK4_IPV6 makes the code a bit
more robust.

Bug: 5535055
Change-Id: I4d6ed3497c5b8643c864783cf681f088cf6b8d2a
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>

ARM: common: fiq_debugger: make uart irq be no_suspend

Change-Id: I8e3d2a95c0ddc2706b021cd33534fe2fd302268e
Signed-off-by: Dima Zavin <dima@android.com>

net: wireless: Skip connect warning for CONFIG_CFG80211_ALLOW_RECONNECT

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

Merge remote-tracking branch 'remotes/aosp/android-3.0' into develop-3.0

Conflicts:
drivers/net/wireless/adm8211.c
drivers/net/wireless/airo.c
drivers/net/wireless/airo_cs.c
drivers/net/wireless/at76c50x-usb.c
drivers/net/wireless/at76c50x-usb.h
drivers/net/wireless/ath/Kconfig
drivers/net/wireless/ath/Makefile
drivers/net/wireless/ath/ath.h
drivers/net/wireless/ath/ath5k/Kconfig
drivers/net/wireless/ath/ath5k/Makefile
drivers/net/wireless/ath/ath5k/ani.c
drivers/net/wireless/ath/ath5k/ani.h
drivers/net/wireless/ath/ath5k/ath5k.h
drivers/net/wireless/ath/ath5k/attach.c
drivers/net/wireless/ath/ath5k/base.c
drivers/net/wireless/ath/ath5k/base.h
drivers/net/wireless/ath/ath5k/caps.c
drivers/net/wireless/ath/ath5k/debug.c
drivers/net/wireless/ath/ath5k/debug.h
drivers/net/wireless/ath/ath5k/desc.c
drivers/net/wireless/ath/ath5k/desc.h
drivers/net/wireless/ath/ath5k/dma.c
drivers/net/wireless/ath/ath5k/eeprom.c
drivers/net/wireless/ath/ath5k/eeprom.h
drivers/net/wireless/ath/ath5k/initvals.c
drivers/net/wireless/ath/ath5k/led.c
drivers/net/wireless/ath/ath5k/pcu.c
drivers/net/wireless/ath/ath5k/phy.c
drivers/net/wireless/ath/ath5k/qcu.c
drivers/net/wireless/ath/ath5k/reg.h
drivers/net/wireless/ath/ath5k/reset.c
drivers/net/wireless/ath/ath5k/rfbuffer.h
drivers/net/wireless/ath/ath5k/sysfs.c
drivers/net/wireless/ath/ath9k/Kconfig
drivers/net/wireless/ath/ath9k/Makefile
drivers/net/wireless/ath/ath9k/ahb.c
drivers/net/wireless/ath/ath9k/ani.c
drivers/net/wireless/ath/ath9k/ani.h
drivers/net/wireless/ath/ath9k/ar5008_initvals.h
drivers/net/wireless/ath/ath9k/ar5008_phy.c
drivers/net/wireless/ath/ath9k/ar9001_initvals.h
drivers/net/wireless/ath/ath9k/ar9002_calib.c
drivers/net/wireless/ath/ath9k/ar9002_hw.c
drivers/net/wireless/ath/ath9k/ar9002_initvals.h
drivers/net/wireless/ath/ath9k/ar9002_mac.c
drivers/net/wireless/ath/ath9k/ar9002_phy.c
drivers/net/wireless/ath/ath9k/ar9002_phy.h
drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
drivers/net/wireless/ath/ath9k/ar9003_calib.c
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
drivers/net/wireless/ath/ath9k/ar9003_hw.c
drivers/net/wireless/ath/ath9k/ar9003_mac.c
drivers/net/wireless/ath/ath9k/ar9003_mac.h
drivers/net/wireless/ath/ath9k/ar9003_paprd.c
drivers/net/wireless/ath/ath9k/ar9003_phy.c
drivers/net/wireless/ath/ath9k/ar9003_phy.h
drivers/net/wireless/ath/ath9k/ath9k.h
drivers/net/wireless/ath/ath9k/beacon.c
drivers/net/wireless/ath/ath9k/btcoex.c
drivers/net/wireless/ath/ath9k/btcoex.h
drivers/net/wireless/ath/ath9k/calib.c
drivers/net/wireless/ath/ath9k/calib.h
drivers/net/wireless/ath/ath9k/common.c
drivers/net/wireless/ath/ath9k/common.h
drivers/net/wireless/ath/ath9k/debug.c
drivers/net/wireless/ath/ath9k/debug.h
drivers/net/wireless/ath/ath9k/eeprom.c
drivers/net/wireless/ath/ath9k/eeprom.h
drivers/net/wireless/ath/ath9k/eeprom_4k.c
drivers/net/wireless/ath/ath9k/eeprom_9287.c
drivers/net/wireless/ath/ath9k/eeprom_def.c
drivers/net/wireless/ath/ath9k/gpio.c
drivers/net/wireless/ath/ath9k/hif_usb.c
drivers/net/wireless/ath/ath9k/hif_usb.h
drivers/net/wireless/ath/ath9k/htc.h
drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
drivers/net/wireless/ath/ath9k/htc_drv_init.c
drivers/net/wireless/ath/ath9k/htc_drv_main.c
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
drivers/net/wireless/ath/ath9k/htc_hst.c
drivers/net/wireless/ath/ath9k/htc_hst.h
drivers/net/wireless/ath/ath9k/hw-ops.h
drivers/net/wireless/ath/ath9k/hw.c
drivers/net/wireless/ath/ath9k/hw.h
drivers/net/wireless/ath/ath9k/init.c
drivers/net/wireless/ath/ath9k/mac.c
drivers/net/wireless/ath/ath9k/mac.h
drivers/net/wireless/ath/ath9k/main.c
drivers/net/wireless/ath/ath9k/pci.c
drivers/net/wireless/ath/ath9k/phy.h
drivers/net/wireless/ath/ath9k/rc.c
drivers/net/wireless/ath/ath9k/rc.h
drivers/net/wireless/ath/ath9k/recv.c
drivers/net/wireless/ath/ath9k/reg.h
drivers/net/wireless/ath/ath9k/wmi.c
drivers/net/wireless/ath/ath9k/wmi.h
drivers/net/wireless/ath/ath9k/xmit.c
drivers/net/wireless/ath/debug.c
drivers/net/wireless/ath/hw.c
drivers/net/wireless/ath/main.c
drivers/net/wireless/ath/reg.h
drivers/net/wireless/ath/regd.c
drivers/net/wireless/ath/regd.h
drivers/net/wireless/ath/regd_common.h
drivers/net/wireless/atmel.c
drivers/net/wireless/atmel_cs.c
drivers/net/wireless/b43/Kconfig
drivers/net/wireless/b43/Makefile
drivers/net/wireless/b43/b43.h
drivers/net/wireless/b43/debugfs.c
drivers/net/wireless/b43/dma.c
drivers/net/wireless/b43/dma.h
drivers/net/wireless/b43/leds.c
drivers/net/wireless/b43/lo.c
drivers/net/wireless/b43/main.c
drivers/net/wireless/b43/main.h
drivers/net/wireless/b43/pcmcia.c
drivers/net/wireless/b43/phy_a.c
drivers/net/wireless/b43/phy_common.c
drivers/net/wireless/b43/phy_common.h
drivers/net/wireless/b43/phy_g.c
drivers/net/wireless/b43/phy_g.h
drivers/net/wireless/b43/phy_lp.c
drivers/net/wireless/b43/phy_n.c
drivers/net/wireless/b43/phy_n.h
drivers/net/wireless/b43/pio.c
drivers/net/wireless/b43/rfkill.c
drivers/net/wireless/b43/sdio.c
drivers/net/wireless/b43/sysfs.c
drivers/net/wireless/b43/tables_lpphy.c
drivers/net/wireless/b43/tables_nphy.c
drivers/net/wireless/b43/tables_nphy.h
drivers/net/wireless/b43/wa.c
drivers/net/wireless/b43/xmit.c
drivers/net/wireless/b43/xmit.h
drivers/net/wireless/b43legacy/b43legacy.h
drivers/net/wireless/b43legacy/debugfs.c
drivers/net/wireless/b43legacy/main.c
drivers/net/wireless/b43legacy/phy.c
drivers/net/wireless/b43legacy/rfkill.c
drivers/net/wireless/b43legacy/xmit.c
drivers/net/wireless/hostap/hostap_ap.c
drivers/net/wireless/hostap/hostap_ap.h
drivers/net/wireless/hostap/hostap_config.h
drivers/net/wireless/hostap/hostap_cs.c
drivers/net/wireless/hostap/hostap_hw.c
drivers/net/wireless/hostap/hostap_ioctl.c
drivers/net/wireless/hostap/hostap_main.c
drivers/net/wireless/hostap/hostap_wlan.h
drivers/net/wireless/ipw2x00/ipw2100.c
drivers/net/wireless/ipw2x00/ipw2100.h
drivers/net/wireless/ipw2x00/ipw2200.c
drivers/net/wireless/ipw2x00/ipw2200.h
drivers/net/wireless/ipw2x00/libipw_module.c
drivers/net/wireless/ipw2x00/libipw_rx.c
drivers/net/wireless/iwlwifi/Kconfig
drivers/net/wireless/iwlwifi/Makefile
drivers/net/wireless/iwlwifi/iwl-1000.c
drivers/net/wireless/iwlwifi/iwl-5000-hw.h
drivers/net/wireless/iwlwifi/iwl-5000.c
drivers/net/wireless/iwlwifi/iwl-6000-hw.h
drivers/net/wireless/iwlwifi/iwl-6000.c
drivers/net/wireless/iwlwifi/iwl-agn-calib.c
drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
drivers/net/wireless/iwlwifi/iwl-agn-hw.h
drivers/net/wireless/iwlwifi/iwl-agn-ict.c
drivers/net/wireless/iwlwifi/iwl-agn-lib.c
drivers/net/wireless/iwlwifi/iwl-agn-rs.c
drivers/net/wireless/iwlwifi/iwl-agn-rs.h
drivers/net/wireless/iwlwifi/iwl-agn-tx.c
drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
drivers/net/wireless/iwlwifi/iwl-agn.c
drivers/net/wireless/iwlwifi/iwl-agn.h
drivers/net/wireless/iwlwifi/iwl-commands.h
drivers/net/wireless/iwlwifi/iwl-core.c
drivers/net/wireless/iwlwifi/iwl-core.h
drivers/net/wireless/iwlwifi/iwl-csr.h
drivers/net/wireless/iwlwifi/iwl-debug.h
drivers/net/wireless/iwlwifi/iwl-debugfs.c
drivers/net/wireless/iwlwifi/iwl-dev.h
drivers/net/wireless/iwlwifi/iwl-devtrace.c
drivers/net/wireless/iwlwifi/iwl-devtrace.h
drivers/net/wireless/iwlwifi/iwl-eeprom.c
drivers/net/wireless/iwlwifi/iwl-eeprom.h
drivers/net/wireless/iwlwifi/iwl-fh.h
drivers/net/wireless/iwlwifi/iwl-hcmd.c
drivers/net/wireless/iwlwifi/iwl-helpers.h
drivers/net/wireless/iwlwifi/iwl-io.h
drivers/net/wireless/iwlwifi/iwl-led.c
drivers/net/wireless/iwlwifi/iwl-led.h
drivers/net/wireless/iwlwifi/iwl-power.c
drivers/net/wireless/iwlwifi/iwl-power.h
drivers/net/wireless/iwlwifi/iwl-prph.h
drivers/net/wireless/iwlwifi/iwl-rx.c
drivers/net/wireless/iwlwifi/iwl-scan.c
drivers/net/wireless/iwlwifi/iwl-sta.c
drivers/net/wireless/iwlwifi/iwl-sta.h
drivers/net/wireless/iwlwifi/iwl-tx.c
drivers/net/wireless/iwmc3200wifi/cfg80211.c
drivers/net/wireless/iwmc3200wifi/commands.c
drivers/net/wireless/iwmc3200wifi/debugfs.c
drivers/net/wireless/iwmc3200wifi/hal.c
drivers/net/wireless/iwmc3200wifi/netdev.c
drivers/net/wireless/iwmc3200wifi/rx.c
drivers/net/wireless/iwmc3200wifi/sdio.c
drivers/net/wireless/iwmc3200wifi/tx.c
drivers/net/wireless/libertas/README
drivers/net/wireless/libertas/cfg.c
drivers/net/wireless/libertas/cmd.c
drivers/net/wireless/libertas/cmdresp.c
drivers/net/wireless/libertas/debugfs.c
drivers/net/wireless/libertas/decl.h
drivers/net/wireless/libertas/defs.h
drivers/net/wireless/libertas/dev.h
drivers/net/wireless/libertas/ethtool.c
drivers/net/wireless/libertas/host.h
drivers/net/wireless/libertas/if_cs.c
drivers/net/wireless/libertas/if_sdio.c
drivers/net/wireless/libertas/if_sdio.h
drivers/net/wireless/libertas/if_spi.c
drivers/net/wireless/libertas/if_spi.h
drivers/net/wireless/libertas/if_usb.c
drivers/net/wireless/libertas/if_usb.h
drivers/net/wireless/libertas/main.c
drivers/net/wireless/libertas/mesh.c
drivers/net/wireless/libertas/mesh.h
drivers/net/wireless/libertas/rx.c
drivers/net/wireless/libertas/tx.c
drivers/net/wireless/libertas/types.h
drivers/net/wireless/libertas_tf/if_usb.c
drivers/net/wireless/libertas_tf/main.c
drivers/net/wireless/mac80211_hwsim.c
drivers/net/wireless/mwl8k.c
drivers/net/wireless/orinoco/cfg.c
drivers/net/wireless/orinoco/hw.c
drivers/net/wireless/orinoco/main.c
drivers/net/wireless/orinoco/orinoco_cs.c
drivers/net/wireless/orinoco/orinoco_usb.c
drivers/net/wireless/orinoco/scan.c
drivers/net/wireless/orinoco/scan.h
drivers/net/wireless/orinoco/spectrum_cs.c
drivers/net/wireless/orinoco/wext.c
drivers/net/wireless/p54/Kconfig
drivers/net/wireless/p54/eeprom.c
drivers/net/wireless/p54/eeprom.h
drivers/net/wireless/p54/fwio.c
drivers/net/wireless/p54/lmac.h
drivers/net/wireless/p54/main.c
drivers/net/wireless/p54/p54.h
drivers/net/wireless/p54/p54pci.c
drivers/net/wireless/p54/p54spi.c
drivers/net/wireless/p54/p54spi_eeprom.h
drivers/net/wireless/p54/p54usb.c
drivers/net/wireless/p54/txrx.c
drivers/net/wireless/prism54/isl_ioctl.c
drivers/net/wireless/prism54/islpci_dev.c
drivers/net/wireless/prism54/islpci_eth.c
drivers/net/wireless/prism54/islpci_hotplug.c
drivers/net/wireless/ray_cs.c
drivers/net/wireless/ray_cs.h
drivers/net/wireless/rayctl.h
drivers/net/wireless/rndis_wlan.c
drivers/net/wireless/rt2x00/Kconfig
drivers/net/wireless/rt2x00/Makefile
drivers/net/wireless/rt2x00/rt2400pci.c
drivers/net/wireless/rt2x00/rt2400pci.h
drivers/net/wireless/rt2x00/rt2500pci.c
drivers/net/wireless/rt2x00/rt2500pci.h
drivers/net/wireless/rt2x00/rt2500usb.c
drivers/net/wireless/rt2x00/rt2800.h
drivers/net/wireless/rt2x00/rt2800lib.c
drivers/net/wireless/rt2x00/rt2800lib.h
drivers/net/wireless/rt2x00/rt2800pci.c
drivers/net/wireless/rt2x00/rt2800pci.h
drivers/net/wireless/rt2x00/rt2800usb.c
drivers/net/wireless/rt2x00/rt2800usb.h
drivers/net/wireless/rt2x00/rt2x00.h
drivers/net/wireless/rt2x00/rt2x00config.c
drivers/net/wireless/rt2x00/rt2x00crypto.c
drivers/net/wireless/rt2x00/rt2x00debug.c
drivers/net/wireless/rt2x00/rt2x00dev.c
drivers/net/wireless/rt2x00/rt2x00dump.h
drivers/net/wireless/rt2x00/rt2x00firmware.c
drivers/net/wireless/rt2x00/rt2x00lib.h
drivers/net/wireless/rt2x00/rt2x00link.c
drivers/net/wireless/rt2x00/rt2x00mac.c
drivers/net/wireless/rt2x00/rt2x00pci.c
drivers/net/wireless/rt2x00/rt2x00pci.h
drivers/net/wireless/rt2x00/rt2x00queue.c
drivers/net/wireless/rt2x00/rt2x00queue.h
drivers/net/wireless/rt2x00/rt2x00reg.h
drivers/net/wireless/rt2x00/rt2x00soc.c
drivers/net/wireless/rt2x00/rt2x00usb.c
drivers/net/wireless/rt2x00/rt2x00usb.h
drivers/net/wireless/rt2x00/rt61pci.c
drivers/net/wireless/rt2x00/rt61pci.h
drivers/net/wireless/rt2x00/rt73usb.c
drivers/net/wireless/rt2x00/rt73usb.h
drivers/net/wireless/rtl818x/Makefile
drivers/net/wireless/rtl818x/rtl8180/grf5101.h
drivers/net/wireless/rtl818x/rtl8180/max2820.h
drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
drivers/net/wireless/rtl818x/rtl8180/rtl8225.h
drivers/net/wireless/rtl818x/rtl8180/sa2400.h
drivers/net/wireless/rtl818x/rtl8187/leds.h
drivers/net/wireless/rtl818x/rtl8187/rfkill.h
drivers/net/wireless/rtl818x/rtl8187/rtl8225.h
drivers/net/wireless/wl1251/io.h
drivers/net/wireless/wl12xx/Kconfig
drivers/net/wireless/wl12xx/Makefile
drivers/net/wireless/wl12xx/wl12xx_80211.h
drivers/net/wireless/wl3501_cs.c
drivers/net/wireless/zd1201.c
drivers/net/wireless/zd1211rw/Makefile
drivers/net/wireless/zd1211rw/zd_chip.c
drivers/net/wireless/zd1211rw/zd_chip.h
drivers/net/wireless/zd1211rw/zd_def.h
drivers/net/wireless/zd1211rw/zd_mac.c
drivers/net/wireless/zd1211rw/zd_mac.h
drivers/net/wireless/zd1211rw/zd_rf.h
drivers/net/wireless/zd1211rw/zd_rf_al2230.c
drivers/net/wireless/zd1211rw/zd_rf_al7230b.c
drivers/net/wireless/zd1211rw/zd_rf_rf2959.c
drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
drivers/net/wireless/zd1211rw/zd_usb.c
drivers/net/wireless/zd1211rw/zd_usb.h

revert android-tegra-2.6.36-honeycomb-mr1-9001adc to v2.6.36

temp revert rk change

temp rename asix for merge 3.0

rm some moto drivers for merge 3.0

rm some drivers on drivers/net/wireless for merge 3.0

Merge commit 'v3.0.8' into android-3.0

Merge remote-tracking branch 'kernel-2.6.32/develop' into develop-2.6.36

Conflicts:
drivers/media/video/rk29_camera_oneframe.c
drivers/mmc/core/core.c
drivers/usb/gadget/f_mass_storage.c
include/linux/mmc/host.h

mm: avoid livelock on !__GFP_FS allocations

Under the following conditions, __alloc_pages_slowpath can loop
forever:
gfp_mask & __GFP_WAIT is true
gfp_mask & __GFP_FS is false
reclaim and compaction make no progress
order <= PAGE_ALLOC_COSTLY_ORDER

The gfp conditions are normally invalid, because !__GFP_FS
disables most of the reclaim methods that __GFP_WAIT would
wait for.  However, these conditions happen very often during
suspend and resume, when pm_restrict_gfp_mask() effectively
converts all GFP_KERNEL allocations into __GFP_WAIT.

The oom killer is not run because gfp_mask & __GFP_FS is false,
but should_alloc_retry will always return true when order is less
than PAGE_ALLOC_COSTLY_ORDER.  __alloc_pages_slowpath will
loop forever between the rebalance label and should_alloc_retry,
unless another thread happens to release enough pages to satisfy
the allocation.

Add a check to detect when PM has disabled __GFP_FS, and do not
retry if reclaim is not making any progress.

[taken from patch on lkml by Mel Gorman, commit message by ccross]
Change-Id: I864a24e9d9fd98bd0e3d6e9c1e85b6c1b766850e
Signed-off-by: Colin Cross <ccross@android.com>

mmc: block: Improve logging of handling emmc timeouts

Add some logging to make it clear just how the emmc timeout
was handled.

Change-Id: Id33fd28d8b9778dc4e85db829e2637a328eddab4
Signed-off-by: Ken Sumrall <ksumrall@android.com>

mmc: block: add checking of r/w command response

Check the status bits in the r/w command response for any errors.
If error bits are set, then we won't have seen any data transferred,
so it's pointless doing any further checking.

Change-Id: If118a4bcbb0e57a7d95b5e40d662fca87fdcba7f
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

mmc: block: improve error recovery from command channel errors

Command channel errors fall into four classes:

1. The command was issued with the card in the wrong state
2. The command failed to be received by the card correctly
3. The cards response failed to be received by the host (CRC error)
4. The card failed to respond to the card

For (1), in theory we should know that the card is in the correct state.
However, a failed stop command (or other failure) may result in the card
remaining in a data transfer state from the previous command.  If we
detect this condition, we try to recover by sending a stop command.

For the initial commands (set block count and the read/write command)
no data will have been transferred.  All that we need deal with is
retrying at this point.  A failed stop command can be remedied as
above.

If we are unable to recover the card (eg, the card ignores our requests
for status, or we don't recognise the error code) then we immediately
fail the request.

Change-Id: Ief109a57fd21a247381b38f1164c22f0344f0284
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

mmc: block: allow get_card_status() to return error status

If the MMC_SEND_STATUS command is not successful, we should not return
a zero status word, but instead allow the caller to know positively
that an error occurred.

Convert the open-coded get_card_status() to use the helper function,
and provide definitions for the card state field.

Change-Id: Icfd6258af78a89c21abac386c556153fa3fac364
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

net: wireless: bcm4329: Prohibit FW access in case of FW crash

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

net: wireless: bcmdhd: Adjust scan parameters for wl_cfg80211_connect()

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

net: wireless: bcmdhd: Update to version 5.90.125.94

- Fix WFD interface removal
- Fix profile update
- Keep same mode for softap or WFD during early suspend
- Add dhd_console_ms parameter access

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

ARM: common: fiq_debugger: protect the uart state from the sleep timer

Change-Id: I6b834d5cab96c3466042f758feb69eae6893ec49
Signed-off-by: Dima Zavin <dima@android.com>

ARM: common: fiq_debugger: add suspend/resume handlers

Change-Id: If6eb75059fdf4867eb9a974d60b9d50e5e3350d4
Signed-off-by: Dima Zavin <dima@android.com>

ARM: common: fiq_debugger: add uart_enable/disable platform callbacks

This allows the platform specific drivers to properly enable
and disable the uart at the appropriate times. On some platforms, just
managing the clock is not enough.

Change-Id: I5feaab04cfe313a4a9470ca274838676b9684201
Signed-off-by: Dima Zavin <dima@android.com>

ARM: common: fiq_debugger: add non-fiq debugger support

Add irq-only support to the debugger. This allows the debugger
to always run at irq context. This introduces limitations to
being able to debug certain kinds of issues, but it is still
very useful as a debugging tool.

Change-Id: I1e4223e886cb2d90ef5ed31419bdd5cdd7f904ca
Signed-off-by: Dima Zavin <dima@android.com>

ARM: common: fiq_debugger: peek the 0th char in ringbuf

ringbuf_consume advances the tail ptr, so peek should always
just peek at offset 0

Change-Id: I8d3d22d2ec1e563d73b53ccbad302e6d74e64e53
Signed-off-by: Dima Zavin <dima@android.com>

ARM: common: fiq_debugger: fix the cleanup on errors in probe

Change-Id: I58bd0604c0520b13e11bf02836eb4ddbadba1372
Signed-off-by: Dima Zavin <dima@android.com>

ARM: common: fiq_debugger: do not disable debug when console is enabled

Change-Id: I5f8074a860f9b143ee0c87296683bbf2cffb5a36
Signed-off-by: Dima Zavin <dima@android.com>

ram_console: pass in a boot info string

Allow the board file to pass a boot info string through the
platform data that is appended to the /proc/last_kmsg file.

Change-Id: I37065fafb09676085465c93384d8e176fdd942d6
Signed-off-by: Colin Cross <ccross@android.com>

Close some printk sentences.

Add some ioctl operation for wimo in rk29_fb.c. some ipp operation are contained in those ioctl operation(most in fb0_ioctl).  you can close them by FB_WIMO_FLAG which is in rk29_fb.h.

Linux 3.0.8

hfsplus: Fix kfree of wrong pointers in hfsplus_fill_super() error path

commit f588c960fcaa6fa8bf82930bb819c9aca4eb9347 upstream.

Commit 6596528e391a ("hfsplus: ensure bio requests are not smaller than
the hardware sectors") changed the pointers used for volume header
allocations but failed to free the correct pointers in the error path
path of hfsplus_fill_super() and hfsplus_read_wrapper.

The second hunk came from a separate patch by Pavel Ivanov.

Reported-by: Pavel Ivanov <paivanof@gmail.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ALSA: hda - Add position_fix quirk for Dell Inspiron 1010

commit 051a8cb6550d917225ead1cd008b5966350f6d53 upstream.

The previous fix for the position-buffer check gives yet another
regression on a Dell laptop.  The safest fix right now is to add a
static quirk for this device (and better to apply it for stable
kernels too).

Reported-by: Éric Piel <Eric.Piel@tremplin-utc.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ALSA: HDA: conexant support for Lenovo T520/W520

commit ca201c096269ee2d40037fea96a59fd0695888c4 upstream.

This is patch for Conexant codec of Intel HDA driver, adding new quirk
for Lenovo Thinkpad T520 and W520. Conexant autodetection works fine for
T520 (similar subsystem ID is used also in W520 model) and detects more
mixer features compared to generic (fallback) Lenovo quirk with
hardcoded options in Conexant codec.

Patch was activelly tested with Linux 3.0.4, 3.0.6 and 3.0.7 without any
problems.

Signed-off-by: Daniel Suchy <danny@danysek.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

crypto: ghash - Avoid null pointer dereference if no key is set

commit 7ed47b7d142ec99ad6880bbbec51e9f12b3af74c upstream.

The ghash_update function passes a pointer to gf128mul_4k_lle which will
be NULL if ghash_setkey is not called or if the most recent call to
ghash_setkey failed to allocate memory.  This causes an oops.  Fix this
up by returning an error code in the null case.

This is trivially triggered from unprivileged userspace through the
AF_ALG interface by simply writing to the socket without setting a key.

The ghash_final function has a similar issue, but triggering it requires
a memory allocation failure in ghash_setkey _after_ at least one
successful call to ghash_update.

  BUG: unable to handle kernel NULL pointer dereference at 00000670
  IP: [<d88c92d4>] gf128mul_4k_lle+0x23/0x60 [gf128mul]
  *pde = 00000000
  Oops: 0000 [#1] PREEMPT SMP
  Modules linked in: ghash_generic gf128mul algif_hash af_alg nfs lockd nfs_acl sunrpc bridge ipv6 stp llc

  Pid: 1502, comm: hashatron Tainted: G        W   3.1.0-rc9-00085-ge9308cf #32 Bochs Bochs
  EIP: 0060:[<d88c92d4>] EFLAGS: 00000202 CPU: 0
  EIP is at gf128mul_4k_lle+0x23/0x60 [gf128mul]
  EAX: d69db1f0 EBX: d6b8ddac ECX: 00000004 EDX: 00000000
  ESI: 00000670 EDI: d6b8ddac EBP: d6b8ddc8 ESP: d6b8dda4
   DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
  Process hashatron (pid: 1502, ti=d6b8c000 task=d6810000 task.ti=d6b8c000)
  Stack:
   00000000 d69db1f0 00000163 00000000 d6b8ddc8 c101a520 d69db1f0 d52aa000
   00000ff0 d6b8dde8 d88d310f d6b8a3f8 d52aa000 00001000 d88d502c d6b8ddfc
   00001000 d6b8ddf4 c11676ed d69db1e8 d6b8de24 c11679ad d52aa000 00000000
  Call Trace:
   [<c101a520>] ? kmap_atomic_prot+0x37/0xa6
   [<d88d310f>] ghash_update+0x85/0xbe [ghash_generic]
   [<c11676ed>] crypto_shash_update+0x18/0x1b
   [<c11679ad>] shash_ahash_update+0x22/0x36
   [<c11679cc>] shash_async_update+0xb/0xd
   [<d88ce0ba>] hash_sendpage+0xba/0xf2 [algif_hash]
   [<c121b24c>] kernel_sendpage+0x39/0x4e
   [<d88ce000>] ? 0xd88cdfff
   [<c121b298>] sock_sendpage+0x37/0x3e
   [<c121b261>] ? kernel_sendpage+0x4e/0x4e
   [<c10b4dbc>] pipe_to_sendpage+0x56/0x61
   [<c10b4e1f>] splice_from_pipe_feed+0x58/0xcd
   [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10
   [<c10b51f5>] __splice_from_pipe+0x36/0x55
   [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10
   [<c10b6383>] splice_from_pipe+0x51/0x64
   [<c10b63c2>] ? default_file_splice_write+0x2c/0x2c
   [<c10b63d5>] generic_splice_sendpage+0x13/0x15
   [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10
   [<c10b527f>] do_splice_from+0x5d/0x67
   [<c10b6865>] sys_splice+0x2bf/0x363
   [<c129373b>] ? sysenter_exit+0xf/0x16
   [<c104dc1e>] ? trace_hardirqs_on_caller+0x10e/0x13f
   [<c129370c>] sysenter_do_call+0x12/0x32
  Code: 83 c4 0c 5b 5e 5f c9 c3 55 b9 04 00 00 00 89 e5 57 8d 7d e4 56 53 8d 5d e4 83 ec 18 89 45 e0 89 55 dc 0f b6 70 0f c1 e6 04 01 d6 <f3> a5 be 0f 00 00 00 4e 89 d8 e8 48 ff ff ff 8b 45 e0 89 da 0f
  EIP: [<d88c92d4>] gf128mul_4k_lle+0x23/0x60 [gf128mul] SS:ESP 0068:d6b8dda4
  CR2: 0000000000000670
  ---[ end trace 4eaa2a86a8e2da24 ]---
  note: hashatron[1502] exited with preempt_count 1
  BUG: scheduling while atomic: hashatron/1502/0x10000002
  INFO: lockdep is turned off.
  [...]

Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x25: Prevent skb overreads when checking call user data

commit 7f81e25befdfb3272345a2e775f520e1d515fa20 upstream.

x25_find_listener does not check that the amount of call user data given
in the skb is big enough in per-socket comparisons, hence buffer
overreads may occur.  Fix this by adding a check.

Signed-off-by: Matthew Daley <mattjd@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Acked-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

mm: fix race between mremap and removing migration entry

commit 486cf46f3f9be5f2a966016c1a8fe01e32cde09e upstream.

I don't usually pay much attention to the stale "? " addresses in
stack backtraces, but this lucky report from Pawel Sikora hints that
mremap's move_ptes() has inadequate locking against page migration.

 3.0 BUG_ON(!PageLocked(p)) in migration_entry_to_page():
 kernel BUG at include/linux/swapops.h:105!
 RIP: 0010:[<ffffffff81127b76>]  [<ffffffff81127b76>]
                       migration_entry_wait+0x156/0x160
  [<ffffffff811016a1>] handle_pte_fault+0xae1/0xaf0
  [<ffffffff810feee2>] ? __pte_alloc+0x42/0x120
  [<ffffffff8112c26b>] ? do_huge_pmd_anonymous_page+0xab/0x310
  [<ffffffff81102a31>] handle_mm_fault+0x181/0x310
  [<ffffffff81106097>] ? vma_adjust+0x537/0x570
  [<ffffffff81424bed>] do_page_fault+0x11d/0x4e0
  [<ffffffff81109a05>] ? do_mremap+0x2d5/0x570
  [<ffffffff81421d5f>] page_fault+0x1f/0x30

mremap's down_write of mmap_sem, together with i_mmap_mutex or lock,
and pagetable locks, were good enough before page migration (with its
requirement that every migration entry be found) came in, and enough
while migration always held mmap_sem; but not enough nowadays, when
there's memory hotremove and compaction.

The danger is that move_ptes() lets a migration entry dodge around
behind remove_migration_pte()'s back, so it's in the old location when
looking at the new, then in the new location when looking at the old.

Either mremap's move_ptes() must additionally take anon_vma lock(), or
migration's remove_migration_pte() must stop peeking for is_swap_entry()
before it takes pagetable lock.

Consensus chooses the latter: we prefer to add overhead to migration
than to mremapping, which gets used by JVMs and by exec stack setup.

Reported-and-tested-by: Paweł Sikora <pluto@agmk.net>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hwmon: (w83627ehf) Fix negative 8-bit temperature values

commit 133d324d82e144588939ad25b732b5b6c33b03d9 upstream.

Since 8-bit temperature values are now handled in 16-bit struct
members, values have to be cast to s8 for negative temperatures to be
properly handled. This is broken since kernel version 2.6.39
(commit bce26c58df86599c9570cee83eac58bdaae760e4.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86: Fix S4 regression

commit 8548c84da2f47e71bbbe300f55edb768492575f7 upstream.

Commit 4b239f458 ("x86-64, mm: Put early page table high") causes a S4
regression since 2.6.39, namely the machine reboots occasionally at S4
resume.  It doesn't happen always, overall rate is about 1/20.  But,
like other bugs, once when this happens, it continues to happen.

This patch fixes the problem by essentially reverting the memory
assignment in the older way.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Yinghai Lu <yinghai.lu@oracle.com>
[ We'll hopefully find the real fix, but that's too late for 3.1 now ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

firewire: sbp2: fix panic after rmmod with slow targets

commit 0278ccd9d53e07c4e699432b2fed9de6c56f506c upstream.

If firewire-sbp2 starts a login to a target that doesn't complete ORBs
in a timely manner (and has to retry the login), and the module is
removed before the operation times out, you end up with a null-pointer
dereference and a kernel panic.

[SR:  This happens because sbp2_target_get/put() do not maintain
module references.  scsi_device_get/put() do, but at occasions like
Chris describes one, nobody holds a reference to an SBP-2 sdev.]

This patch cancels pending work for each unit in sbp2_remove(), which
hopefully means there are no extra references around that prevent us
from unloading. This fixes my crash.

Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

xfs: revert to using a kthread for AIL pushing

commit 0030807c66f058230bcb20d2573bcaf28852e804 upstream

Currently we have a few issues with the way the workqueue code is used to
implement AIL pushing:

 - it accidentally uses the same workqueue as the syncer action, and thus
   can be prevented from running if there are enough sync actions active
   in the system.
 - it doesn't use the HIGHPRI flag to queue at the head of the queue of
   work items

At this point I'm not confident enough in getting all the workqueue flags and
tweaks right to provide a perfectly reliable execution context for AIL
pushing, which is the most important piece in XFS to make forward progress
when the log fills.

Revert back to use a kthread per filesystem which fixes all the above issues
at the cost of having a task struct and stack around for each mounted
filesystem.  In addition this also gives us much better ways to diagnose
any issues involving hung AIL pushing and removes a small amount of code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Tested-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

xfs: force the log if we encounter pinned buffers in .iop_pushbuf

commit 17b38471c3c07a49f0bbc2ecc2e92050c164e226 upstream

We need to check for pinned buffers even in .iop_pushbuf given that inode
items flush into the same buffers that may be pinned directly due operations
on the unlinked inode list operating directly on buffers.  To do this add a
return value to .iop_pushbuf that tells the AIL push about this and use
the existing log force mechanisms to unpin it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Tested-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

xfs: do not update xa_last_pushed_lsn for locked items

commit bc6e588a8971aa74c02e42db4d6e0248679f3738 upstream

If an item was locked we should not update xa_last_pushed_lsn and thus skip
it when restarting the AIL scan as we need to be able to lock and write it
out as soon as possible.  Otherwise heavy lock contention might starve AIL
pushing too easily, especially given the larger backoff once we moved
xa_last_pushed_lsn all the way to the target lsn.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Tested-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

xfs: use a cursor for bulk AIL insertion

commit 1d8c95a363bf8cd4d4182dd19c01693b635311c2 upstream

xfs: use a cursor for bulk AIL insertion

Delayed logging can insert tens of thousands of log items into the
AIL at the same LSN. When the committing of log commit records
occur, we can get insertions occurring at an LSN that is not at the
end of the AIL. If there are thousands of items in the AIL on the
tail LSN, each insertion has to walk the AIL to find the correct
place to insert the new item into the AIL. This can consume large
amounts of CPU time and block other operations from occurring while
the traversals are in progress.

To avoid this repeated walk, use a AIL cursor to record
where we should be inserting the new items into the AIL without
having to repeat the walk. The cursor infrastructure already
provides this functionality for push walks, so is a simple extension
of existing code. While this will not avoid the initial walk, it
will avoid repeating it tens of thousands of times during a single
checkpoint commit.

This version includes logic improvements from Christoph Hellwig.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

xfs: start periodic workers later

commit 2bcf6e970f5a88fa05dced5eeb0326e13d93c4a1 upstream

Start the periodic sync workers only after we have finished xfs_mountfs
and thus fully set up the filesystem structures.  Without this we can
call into xfs_qm_sync before the quotainfo strucute is set up if the
mount takes unusually long, and probably hit other incomplete states
as well.

Also clean up the xfs_fs_fill_super error path by using consistent
label names, and removing an impossible to reach case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

CIFS: Fix ERR_PTR dereference in cifs_get_root

commit 5b980b01212199833ee8023770fa4cbf1b85e9f4 upstream.

move it to the beginning of the loop.

Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/ttm: unbind ttm before destroying node in accel move cleanup

commit eac2095398668f989a3dd8d00be1b87850d78c01 upstream.

Nouveau makes the assumption that if a TTM is bound there will be a mm_node
around for it and the backwards ordering here resulted in a use-after-free
on some eviction paths.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/ttm: ensure ttm for new node is bound before calling move_notify()

commit 8d3bb23609d4ae22803a15d232289fc09a7b61c4 upstream.

This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't
the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some
paths as nouveau's move_notify() hook requires that the dma addresses be
valid at this point.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hfsplus: ensure bio requests are not smaller than the hardware sectors

commit 6596528e391ad978a6a120142cba97a1d7324cb6 upstream.

Currently all bio requests are 512 bytes, which may fail for media
whose physical sector size is larger than this. Ensure these
requests are not smaller than the block device logical block size.

BugLink: http://bugs.launchpad.net/bugs/734883
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

uvcvideo: Fix crash when linking entities

commit 4d9b2ebd335d83044b9e6656d0e604e8e1300334 upstream.

The uvc_mc_register_entity() function wrongfully selects the
media_entity associated with a UVC entity when creating links. This
results in access to uninitialized media_entity structures and can hit a
BUG_ON statement in media_entity_create_link(). Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

HID: magicmouse: ignore 'ivalid report id' while switching modes, v2

commit 35d851df23b093ee027f827fed2213ae5e88fc7a upstream.

This is basically a more generic respin of 23746a6 ("HID: magicmouse: ignore
'ivalid report id' while switching modes") which got reverted later by
c3a492.

It turns out that on some configurations, this is actually still the case
and we are not able to detect in runtime.

The device reponds with 'invalid report id' when feature report switching it
into multitouch mode is sent to it.

This has been silently ignored before 0825411ade ("HID: bt: Wait for ACK
on Sent Reports"), but since this commit, it propagates -EIO from the _raw
callback .

So let the driver ignore -EIO as response to 0xd7,0x01 report, as that's
how the device reacts in normal mode.

Sad, but following reality.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=35022

Reported-by: Chase Douglas <chase.douglas@canonical.com>
Reported-by: Jaikumar Ganesh <jaikumarg@android.com>
Tested-by: Chase Douglas <chase.douglas@canonical.com>
Tested-by: Jaikumar Ganesh <jaikumarg@android.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Platform: fix samsung-laptop DMI identification for N150/N210/220/N230

commit 78a7539b881eb557494a7c810625c0307b27296c upstream.

Some samsung latop of the N150/N2{10,20,30} serie are badly detected by the samsung-laptop platform driver, see bug # 36082.
It appears that N230 identifies itself as N150/N210/N220/N230 whereas the other identify themselves as N150/N210/220.
This patch attemtp fix #36082 allowing correct identification for all the said netbook model.

Reported-by: Daniel Eklöf <daniel@ekloef.se>
Signed-off-by: Thomas Courbon <thcourbon@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

fuse: fix memory leak

commit 5dfcc87fd79dfb96ed155b524337dbd0da4f5993 upstream.

kmemleak is reporting that 32 bytes are being leaked by FUSE:

  unreferenced object 0xe373b270 (size 32):
  comm "fusermount", pid 1207, jiffies 4294707026 (age 2675.187s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<b05517d7>] kmemleak_alloc+0x27/0x50
    [<b0196435>] kmem_cache_alloc+0xc5/0x180
    [<b02455be>] fuse_alloc_forget+0x1e/0x20
    [<b0245670>] fuse_alloc_inode+0xb0/0xd0
    [<b01b1a8c>] alloc_inode+0x1c/0x80
    [<b01b290f>] iget5_locked+0x8f/0x1a0
    [<b0246022>] fuse_iget+0x72/0x1a0
    [<b02461da>] fuse_get_root_inode+0x8a/0x90
    [<b02465cf>] fuse_fill_super+0x3ef/0x590
    [<b019e56f>] mount_nodev+0x3f/0x90
    [<b0244e95>] fuse_mount+0x15/0x20
    [<b019d1bc>] mount_fs+0x1c/0xc0
    [<b01b5811>] vfs_kern_mount+0x41/0x90
    [<b01b5af9>] do_kern_mount+0x39/0xd0
    [<b01b7585>] do_mount+0x2e5/0x660
    [<b01b7966>] sys_mount+0x66/0xa0

This leak report is consistent and happens once per boot on
3.1.0-rc5-dirty.

This happens if a FORGET request is queued after the fuse device was
released.

Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

cputimer: Cure lock inversion

commit bcd5cff7216f9b2de0a148cc355eac199dc6f1cf upstream.

There's a lock inversion between the cputimer->lock and rq->lock;
notably the two callchains involved are:

 update_rlimit_cpu()
   sighand->siglock
   set_process_cpu_timer()
     cpu_timer_sample_group()
       thread_group_cputimer()
         cputimer->lock
         thread_group_cputime()
           task_sched_runtime()
             ->pi_lock
             rq->lock

 scheduler_tick()
   rq->lock
   task_tick_fair()
     update_curr()
       account_group_exec()
         cputimer->lock

Where the first one is enabling a CLOCK_PROCESS_CPUTIME_ID timer, and
the second one is keeping up-to-date.

This problem was introduced by e8abccb7193 ("posix-cpu-timers: Cure
SMP accounting oddities").

Cure the problem by removing the cputimer->lock and rq->lock nesting,
this leaves concurrent enablers doing duplicate work, but the time
wasted should be on the same order otherwise wasted spinning on the
lock and the greater-than assignment filter should ensure we preserve
monotonicity.

Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/1318928713.21167.4.camel@twins
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/radeon/kms/atom: fix handling of FB scratch indices

commit 5a6e8482a16e61250a9121fc9ec719ab0529e760 upstream.

FB scratch indices are dword indices, but we were treating
them as byte indices.  As such, we were getting the wrong
FB scratch data for non-0 indices.  Fix the indices and
guard the indexing against indices larger than the scratch
allocation.

Fixes memory corruption on some boards if data was written
past the end of the FB scratch array.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Dave Airlie <airlied@redhat.com>
Tested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Avoid using variable-length arrays in kernel/sys.c

commit a84a79e4d369a73c0130b5858199e949432da4c6 upstream.

The size is always valid, but variable-length arrays generate worse code
for no good reason (unless the function happens to be inlined and the
compiler sees the length for the simple constant it is).

Also, there seems to be some code generation problem on POWER, where
Henrik Bakken reports that register r28 can get corrupted under some
subtle circumstances (interrupt happening at the wrong time?).  That all
indicates some seriously broken compiler issues, but since variable
length arrays are bad regardless, there's little point in trying to
chase it down.

"Just don't do that, then".

Reported-by: Henrik Grindal Bakken <henribak@cisco.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hwmon: (w83627ehf) Properly report thermal diode sensors

commit bf164c58e58328c40ebc597a8ac00cc6840f9703 upstream.

The w83627ehf driver is improperly reporting thermal diode sensors as
type 2, instead of 3. This caused "sensors" and possibly other
monitoring tools to report these sensors as "transistor" instead of
"thermal diode".

Furthermore, diode subtype selection (CPU vs. external) is only
supported by the original W83627EHF/EHG. All later models only support
CPU diode type, and some (NCT6776F) don't even have the register in
question so we should avoid reading from it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

HID: usbhid: Add support for SiGma Micro chip

commit f5e4282586dc0c9dab8c7d32e6c43aa07f68586b upstream.

Patch to add SiGma Micro-based keyboards (1c4f:0002) to hid-quirks.

These keyboards dont seem to allow the records to be initialized, and hence a
timeout occurs when the usbhid driver attempts to initialize them. The patch
just adds the signature for these keyboards to the hid-quirks list with the
setting HID_QUIRK_NO_INIT_REPORTS. This removes the 5-10 second wait for the
timeout to occur.

Signed-off-by: Jeremiah Matthey <sprg86@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ARM: 7117/1: perf: fix HW_CACHE_* events on Cortex-A9

commit 29a541f6c1f6e4a85628bb86071b9e72c9f8be2c upstream.

Using COHERENT_LINE_{MISS,HIT} for cache misses and references
respectively is completely wrong. Instead, use the L1D events which
are a better and more useful approximation despite ignoring instruction
traffic.

Reported-by: Alasdair Grant <alasdair.grant@arm.com>
Reported-by: Matt Horsnell <matt.horsnell@arm.com>
Reported-by: Michael Williams <michael.williams@arm.com>
Cc: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ARM: 7113/1: mm: Align bank start to MAX_ORDER_NR_PAGES

commit 002ea9eefec98dada56fd5f8e432a4e8570c2a26 upstream.

The VM subsystem assumes that there are valid memmap entries from
the bank start aligned to MAX_ORDER_NR_PAGES.

On the Ux500 we have a lot of mem=N arguments on the commandline
triggering this bug several times over and causing kernel
oops messages.

Cc: Michael Bohan <mbohan@codeaurora.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Johan Palsson <johan.palsson@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

add i2c_sram.c in sram  for i2c communication when system is sleep

mod old sdmmc drivers

i2s0针对音频随机性出噪声修改：
　　1) i2s0的rx, tx两者都为master，通过修改i2s0的clk来保证lrck_tx与lrck_rx同步
    2) 硬件上针对只有一路LRCK的codec，例如alc5631/5621，可以单独将I2S0_LRCK连接到codec的LRCK, 也可以将I2S0_LRCK与I2S0_LRCK_RX一起连接到codec的LRCK

I2S: add i2s use DMA event mode choose,default use static mode

wm8994: add the spk earpiece Differential signal BB config

rk_headset: Add if headset have not hook key judge

Optimize the powe up and down of wifi and SDcard module

rk29: add timer_cpu.c for debug

rk29: timer: peripheral timer use pclk_periph

We never change pclk_periph when use timer, so it is safe use pclk_periph
as parent clock.
We see some bug when use xin24m. For example rk29_timer_set_next_event will
loop 1s+ on ramos w15 machines.

net: wireless: bcmdhd: Fix crash in p2p OFF

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

ARM: smpboot: Enable irqs on secondary CPU after marking it online/active

Patch is the last version from tglx on Oct 7.

Discussion is at: http://comments.gmane.org/gmane.linux.ports.arm.kernel/131919

The original commit message for the first patch version:

Frank Rowand reported:

 I have a consistent (every boot) hang on boot with the RT patches.
 With a few hacks to get console output, I get:

  rcu_preempt_state detected stalls on CPUs/tasks

 I have also replicated the problem on the ARM RealView (in tree) and
 without the RT patches.

 The problem ended up being caused by the allowed cpus mask being set
 to all possible cpus for the ksoftirqd on the secondary processors.
 So the RCU softirq was never executing on the secondary cpu.

 The problem was that ksoftirqd was woken on the secondary processors before
 the secondary processors were online. This led to allowed cpus being set
 to all cpus.

   wake_up_process()
      try_to_wake_up()
         select_task_rq()
            if (... || !cpu_online(cpu))
               select_fallback_rq(task_cpu(p), p)
                  ...
                  /* No more Mr. Nice Guy. */
                  dest_cpu = cpuset_cpus_allowed_fallback(p)
                     do_set_cpus_allowed(p, cpu_possible_mask)
                        #  Thus ksoftirqd can now run on any cpu...
</report>

The reason is that the ARM SMP boot code for the secondary CPUs enables
interrupts before the newly brought up CPU is marked online and
active.

That causes a wakeup of ksoftirqd or a wakeup of any other kernel
thread which is affine to the brought up CPU break that threads
affinity and therefor being scheduled on already online CPUs.

This problem has been observed on x86 before and the only solution is
to mark the CPU online and wait for the CPU active bit before the
point where interrupts are enabled.

Change-Id: If948ef52d434191579e1ca95d18d0c50e91a03b9
Signed-off-by: Dima Zavin <dima@android.com>

ARM: smp: implement arch_trigger_all_cpus_backtrace using IPI

Based on a rough patch by frank.rowand@am.sony.com

Since ARM doesn't have an NMI (fiq's are not always available),
send an IPI to all other CPUs (current cpu prints the stack directly)
to capture a backtrace.

Change-Id: I8b163c8cec05d521b433ae133795865e8a33d4e2
Signed-off-by: Dima Zavin <dima@android.com>

power: cpufreq interactive governor: use default sample time 20ms

Lower the default time at which a higher speed is allowed to run
before lowering based on lower CPU load from 80ms to 20ms.  Most
Android devices should trade power for performance here,
although tablets and non-battery-powered devices may want to
override this default.

Change-Id: I1a4f7faeca12793c51d5b92db30a63cca8d4f1be
Signed-off-by: Todd Poynor <toddpoynor@google.com>

fix err about 'rk29fb:fix problem :UI jitter when carema DV DC switch'

rk29fb:fix problem :UI jitter when carema DV DC switch

tps65910 regulator aux2 error.

rk29: ddr3sdk: do not define empty rk29_setgpio_suspend_board/rk29_setgpio_resume_board, which is weak function

rk29: phonesdk: do not define empty rk29_setgpio_suspend_board/rk29_setgpio_resume_board, which is weak function

rk29: a22: do not define empty rk29_setgpio_suspend_board/rk29_setgpio_resume_board, which is weak function

rk29: gpio: give default weak empty implementation for board suspend/resume

rk29: add clk_vpu for notify vpu power on