X-Git-Url: http://plrg.eecs.uci.edu/git/?p=firefly-linux-kernel-4.4.55.git;a=blobdiff_plain;f=arch%2Farm%2Fboot%2Fdts%2Frk3288-evb-rk808.dts;h=f1347219b906aa35aa0947fdd2c7b2ee7b2c5171;hp=18eb6cb495f45449577a872c156ccbfc14f61174;hb=6a83e7f14032eced131bdee261c8adafeb252fa8;hpb=d9241b22b58e012f26dd2244508d9f4837402af0

diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index 18eb6cb495f4..f1347219b906 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -40,6 +40,7 @@
 
 /dts-v1/;
 #include "rk3288-evb.dtsi"
+#include "rk3288-android.dtsi"
 
 / {
 	compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
@@ -50,6 +51,22 @@
 		clock-output-names = "ext_gmac";
 		#clock-cells = <0>;
 	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &cpu0 {
@@ -102,6 +119,7 @@
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1250000>;
 				regulator-name = "vdd_gpu";
+				regulator-ramp-delay = <6000>;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <1000000>;
@@ -245,6 +263,10 @@
 	};
 };
 
+&edp_panel {
+	power-supply = <&vcc_lcd>;
+};
+
 &gmac {
 	phy-supply = <&vcc_phy>;
 	phy-mode = "rgmii";
@@ -260,3 +282,7 @@
 	rx_delay = <0x10>;
 	status = "ok";
 };
+
+&lvds_panel {
+	power-supply = <&vcc_lcd>;
+};