}
/**
- * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case
- * @dwc: pointer to our context structure
- *
- * This function will a best effort FIFO allocation in order
- * to improve FIFO usage and throughput, while still allowing
- * us to enable as many endpoints as possible.
- *
- * Keep in mind that this operation will be highly dependent
- * on the configured size for RAM1 - which contains TxFifo -,
- * the amount of endpoints enabled on coreConsultant tool, and
- * the width of the Master Bus.
- *
- * In the ideal world, we would always be able to satisfy the
- * following equation:
+ * dwc3_ep_inc_trb() - Increment a TRB index.
+ * @index - Pointer to the TRB index to increment.
*
- * ((512 + 2 * MDWIDTH-Bytes) + (Number of IN Endpoints - 1) * \
- * (3 * (1024 + MDWIDTH-Bytes) + MDWIDTH-Bytes)) / MDWIDTH-Bytes
- *
- * Unfortunately, due to many variables that's not always the case.
+ * The index should never point to the link TRB. After incrementing,
+ * if it is point to the link TRB, wrap around to the beginning. The
+ * link TRB is always at the last TRB entry.
*/
-int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc)
+static void dwc3_ep_inc_trb(u8 *index)
{
- int last_fifo_depth = 0;
- int ram1_depth;
- int fifo_size;
- int mdwidth;
- int num;
-
- if (!dwc->needs_fifo_resize)
- return 0;
-
- ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
- mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
-
- /* MDWIDTH is represented in bits, we need it in bytes */
- mdwidth >>= 3;
-
- /*
- * FIXME For now we will only allocate 1 wMaxPacketSize space
- * for each enabled endpoint, later patches will come to
- * improve this algorithm so that we better use the internal
- * FIFO space
- */
- for (num = 0; num < dwc->num_in_eps; num++) {
- /* bit0 indicates direction; 1 means IN ep */
- struct dwc3_ep *dep = dwc->eps[(num << 1) | 1];
- int mult = 1;
- int tmp;
-
- if (!(dep->flags & DWC3_EP_ENABLED))
- continue;
-
- if (usb_endpoint_xfer_bulk(dep->endpoint.desc)
- || usb_endpoint_xfer_isoc(dep->endpoint.desc))
- mult = 3;
-
- /*
- * REVISIT: the following assumes we will always have enough
- * space available on the FIFO RAM for all possible use cases.
- * Make sure that's true somehow and change FIFO allocation
- * accordingly.
- *
- * If we have Bulk or Isochronous endpoints, we want
- * them to be able to be very, very fast. So we're giving
- * those endpoints a fifo_size which is enough for 3 full
- * packets
- */
- tmp = mult * (dep->endpoint.maxpacket + mdwidth);
- tmp += mdwidth;
-
- fifo_size = DIV_ROUND_UP(tmp, mdwidth);
-
- fifo_size |= (last_fifo_depth << 16);
-
- dwc3_trace(trace_dwc3_gadget, "%s: Fifo Addr %04x Size %d",
- dep->name, last_fifo_depth, fifo_size & 0xffff);
-
- dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num), fifo_size);
+ (*index)++;
+ if (*index == (DWC3_TRB_NUM - 1))
+ *index = 0;
+}
- last_fifo_depth += (fifo_size & 0xffff);
- }
+static void dwc3_ep_inc_enq(struct dwc3_ep *dep)
+{
+ dwc3_ep_inc_trb(&dep->trb_enqueue);
+}
- return 0;
+static void dwc3_ep_inc_deq(struct dwc3_ep *dep)
+{
+ dwc3_ep_inc_trb(&dep->trb_dequeue);
}
void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
struct dwc3 *dwc = dep->dwc;
int i;
- if (req->queued) {
+ if (req->started) {
i = 0;
do {
- dep->busy_slot++;
- /*
- * Skip LINK TRB. We can't use req->trb and check for
- * DWC3_TRBCTL_LINK_TRB because it points the TRB we
- * just completed (not the LINK TRB).
- */
- if (((dep->busy_slot & DWC3_TRB_MASK) ==
- DWC3_TRB_NUM- 1) &&
- usb_endpoint_xfer_isoc(dep->endpoint.desc))
- dep->busy_slot++;
+ dwc3_ep_inc_deq(dep);
} while(++i < req->request.num_mapped_sgs);
- req->queued = false;
+ req->started = false;
}
list_del(&req->list);
req->trb = NULL;
usb_gadget_unmap_request(&dwc->gadget, &req->request,
req->direction);
- dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
- req, dep->name, req->request.actual,
- req->request.length, status);
trace_dwc3_gadget_giveback(req);
spin_unlock(&dwc->lock);
usb_gadget_giveback_request(&dep->endpoint, &req->request);
spin_lock(&dwc->lock);
+
+ if (dep->number > 1)
+ pm_runtime_put(dwc->dev);
}
int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param)
{
u32 timeout = 500;
+ int status = 0;
+ int ret = 0;
u32 reg;
- trace_dwc3_gadget_generic_cmd(cmd, param);
-
dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param);
dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT);
do {
reg = dwc3_readl(dwc->regs, DWC3_DGCMD);
if (!(reg & DWC3_DGCMD_CMDACT)) {
- dwc3_trace(trace_dwc3_gadget,
- "Command Complete --> %d",
- DWC3_DGCMD_STATUS(reg));
- if (DWC3_DGCMD_STATUS(reg))
- return -EINVAL;
- return 0;
+ status = DWC3_DGCMD_STATUS(reg);
+ if (status)
+ ret = -EINVAL;
+ break;
}
+ } while (timeout--);
- /*
- * We can't sleep here, because it's also called from
- * interrupt context.
- */
- timeout--;
- if (!timeout) {
- dwc3_trace(trace_dwc3_gadget,
- "Command Timed Out");
- return -ETIMEDOUT;
- }
- udelay(1);
- } while (1);
+ if (!timeout) {
+ ret = -ETIMEDOUT;
+ status = -ETIMEDOUT;
+ }
+
+ trace_dwc3_gadget_generic_cmd(cmd, param, status);
+
+ return ret;
}
-int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
- unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
+static int __dwc3_gadget_wakeup(struct dwc3 *dwc);
+
+int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
+ struct dwc3_gadget_ep_cmd_params *params)
{
- struct dwc3_ep *dep = dwc->eps[ep];
+ struct dwc3 *dwc = dep->dwc;
u32 timeout = 500;
u32 reg;
- trace_dwc3_gadget_ep_cmd(dep, cmd, params);
+ int cmd_status = 0;
+ int susphy = false;
+ int ret = -EINVAL;
+
+ /*
+ * Synopsys Databook 2.60a states, on section 6.3.2.5.[1-8], that if
+ * we're issuing an endpoint command, we must check if
+ * GUSB2PHYCFG.SUSPHY bit is set. If it is, then we need to clear it.
+ *
+ * We will also set SUSPHY bit to what it was before returning as stated
+ * by the same section on Synopsys databook.
+ */
+ if (dwc->gadget.speed <= USB_SPEED_HIGH) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+ if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
+ susphy = true;
+ reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ }
+ }
+
+ if (cmd == DWC3_DEPCMD_STARTTRANSFER) {
+ int needs_wakeup;
+
+ needs_wakeup = (dwc->link_state == DWC3_LINK_STATE_U1 ||
+ dwc->link_state == DWC3_LINK_STATE_U2 ||
+ dwc->link_state == DWC3_LINK_STATE_U3);
+
+ if (unlikely(needs_wakeup)) {
+ ret = __dwc3_gadget_wakeup(dwc);
+ dev_WARN_ONCE(dwc->dev, ret, "wakeup failed --> %d\n",
+ ret);
+ }
+ }
- dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
- dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
- dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2);
+ dwc3_writel(dep->regs, DWC3_DEPCMDPAR0, params->param0);
+ dwc3_writel(dep->regs, DWC3_DEPCMDPAR1, params->param1);
+ dwc3_writel(dep->regs, DWC3_DEPCMDPAR2, params->param2);
- dwc3_writel(dwc->regs, DWC3_DEPCMD(ep), cmd | DWC3_DEPCMD_CMDACT);
+ dwc3_writel(dep->regs, DWC3_DEPCMD, cmd | DWC3_DEPCMD_CMDACT);
do {
- reg = dwc3_readl(dwc->regs, DWC3_DEPCMD(ep));
+ reg = dwc3_readl(dep->regs, DWC3_DEPCMD);
if (!(reg & DWC3_DEPCMD_CMDACT)) {
+ cmd_status = DWC3_DEPCMD_STATUS(reg);
+
dwc3_trace(trace_dwc3_gadget,
"Command Complete --> %d",
- DWC3_DEPCMD_STATUS(reg));
- if (DWC3_DEPCMD_STATUS(reg))
- return -EINVAL;
- return 0;
- }
+ cmd_status);
- /*
- * We can't sleep here, because it is also called from
- * interrupt context.
- */
- timeout--;
- if (!timeout) {
- dwc3_trace(trace_dwc3_gadget,
- "Command Timed Out");
- return -ETIMEDOUT;
+ switch (cmd_status) {
+ case 0:
+ ret = 0;
+ break;
+ case DEPEVT_TRANSFER_NO_RESOURCE:
+ dwc3_trace(trace_dwc3_gadget, "no resource available");
+ ret = -EINVAL;
+ break;
+ case DEPEVT_TRANSFER_BUS_EXPIRY:
+ /*
+ * SW issues START TRANSFER command to
+ * isochronous ep with future frame interval. If
+ * future interval time has already passed when
+ * core receives the command, it will respond
+ * with an error status of 'Bus Expiry'.
+ *
+ * Instead of always returning -EINVAL, let's
+ * give a hint to the gadget driver that this is
+ * the case by returning -EAGAIN.
+ */
+ dwc3_trace(trace_dwc3_gadget, "bus expiry");
+ ret = -EAGAIN;
+ break;
+ default:
+ dev_WARN(dwc->dev, "UNKNOWN cmd status\n");
+ }
+
+ break;
}
+ } while (--timeout);
- udelay(1);
- } while (1);
+ if (timeout == 0) {
+ dwc3_trace(trace_dwc3_gadget,
+ "Command Timed Out");
+ ret = -ETIMEDOUT;
+ cmd_status = -ETIMEDOUT;
+ }
+
+ trace_dwc3_gadget_ep_cmd(dep, cmd, params, cmd_status);
+
+ if (unlikely(susphy)) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+ reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ }
+
+ return ret;
+}
+
+static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep)
+{
+ struct dwc3 *dwc = dep->dwc;
+ struct dwc3_gadget_ep_cmd_params params;
+ u32 cmd = DWC3_DEPCMD_CLEARSTALL;
+
+ /*
+ * As of core revision 2.60a the recommended programming model
+ * is to set the ClearPendIN bit when issuing a Clear Stall EP
+ * command for IN endpoints. This is to prevent an issue where
+ * some (non-compliant) hosts may not send ACK TPs for pending
+ * IN transfers due to a mishandled error condition. Synopsys
+ * STAR 9000614252.
+ */
+ if (dep->direction && (dwc->revision >= DWC3_REVISION_260A))
+ cmd |= DWC3_DEPCMD_CLEARPENDIN;
+
+ memset(¶ms, 0, sizeof(params));
+
+ return dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms);
}
static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
memset(¶ms, 0x00, sizeof(params));
cmd = DWC3_DEPCMD_DEPSTARTCFG;
- ret = dwc3_send_gadget_ep_cmd(dwc, 0, cmd, ¶ms);
+ ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms);
if (ret)
return ret;
| DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc));
/* Burst size is only needed in SuperSpeed mode */
- if (dwc->gadget.speed == USB_SPEED_SUPER) {
- u32 burst = dep->endpoint.maxburst - 1;
-
- params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst);
+ if (dwc->gadget.speed >= USB_SPEED_SUPER) {
+ u32 burst = dep->endpoint.maxburst;
+ params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst - 1);
}
if (ignore)
dep->interval = 1 << (desc->bInterval - 1);
}
- return dwc3_send_gadget_ep_cmd(dwc, dep->number,
- DWC3_DEPCMD_SETEPCONFIG, ¶ms);
+ return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETEPCONFIG, ¶ms);
}
static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1);
- return dwc3_send_gadget_ep_cmd(dwc, dep->number,
- DWC3_DEPCMD_SETTRANSFRESOURCE, ¶ms);
+ return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE,
+ ¶ms);
}
/**
reg |= DWC3_DALEPENA_EP(dep->number);
dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
- if (!usb_endpoint_xfer_isoc(desc))
+ if (usb_endpoint_xfer_control(desc))
return 0;
- /* Link TRB for ISOC. The HWO bit is never reset */
+ /* Link TRB. The HWO bit is never reset */
trb_st_hw = &dep->trb_pool[0];
trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
trb_link->ctrl |= DWC3_TRB_CTRL_HWO;
}
- switch (usb_endpoint_type(desc)) {
- case USB_ENDPOINT_XFER_CONTROL:
- strlcat(dep->name, "-control", sizeof(dep->name));
- break;
- case USB_ENDPOINT_XFER_ISOC:
- strlcat(dep->name, "-isoc", sizeof(dep->name));
- break;
- case USB_ENDPOINT_XFER_BULK:
- strlcat(dep->name, "-bulk", sizeof(dep->name));
- break;
- case USB_ENDPOINT_XFER_INT:
- strlcat(dep->name, "-int", sizeof(dep->name));
- break;
- default:
- dev_err(dwc->dev, "invalid endpoint transfer type\n");
- }
-
return 0;
}
{
struct dwc3_request *req;
- if (!list_empty(&dep->req_queued)) {
+ if (!list_empty(&dep->started_list)) {
dwc3_stop_active_transfer(dwc, dep->number, true);
/* - giveback all requests to gadget driver */
- while (!list_empty(&dep->req_queued)) {
- req = next_request(&dep->req_queued);
+ while (!list_empty(&dep->started_list)) {
+ req = next_request(&dep->started_list);
dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
}
}
- while (!list_empty(&dep->request_list)) {
- req = next_request(&dep->request_list);
+ while (!list_empty(&dep->pending_list)) {
+ req = next_request(&dep->pending_list);
dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
}
dep->type = 0;
dep->flags = 0;
- snprintf(dep->name, sizeof(dep->name), "ep%d%s",
- dep->number >> 1,
- (dep->number & 1) ? "in" : "out");
-
return 0;
}
dep = to_dwc3_ep(ep);
dwc = dep->dwc;
- if (dep->flags & DWC3_EP_ENABLED) {
- dev_WARN_ONCE(dwc->dev, true, "%s is already enabled\n",
- dep->name);
+ if (dev_WARN_ONCE(dwc->dev, dep->flags & DWC3_EP_ENABLED,
+ "%s is already enabled\n",
+ dep->name))
return 0;
- }
spin_lock_irqsave(&dwc->lock, flags);
ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false, false);
dep = to_dwc3_ep(ep);
dwc = dep->dwc;
- if (!(dep->flags & DWC3_EP_ENABLED)) {
- dev_WARN_ONCE(dwc->dev, true, "%s is already disabled\n",
- dep->name);
+ if (dev_WARN_ONCE(dwc->dev, !(dep->flags & DWC3_EP_ENABLED),
+ "%s is already disabled\n",
+ dep->name))
return 0;
- }
spin_lock_irqsave(&dwc->lock, flags);
ret = __dwc3_gadget_ep_disable(dep);
chain ? " chain" : "");
- trb = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
+ trb = &dep->trb_pool[dep->trb_enqueue];
if (!req->trb) {
- dwc3_gadget_move_request_queued(req);
+ dwc3_gadget_move_started_request(req);
req->trb = trb;
req->trb_dma = dwc3_trb_dma_offset(dep, trb);
- req->start_slot = dep->free_slot & DWC3_TRB_MASK;
+ req->first_trb_index = dep->trb_enqueue;
}
- dep->free_slot++;
- /* Skip the LINK-TRB on ISOC */
- if (((dep->free_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
- usb_endpoint_xfer_isoc(dep->endpoint.desc))
- dep->free_slot++;
+ dwc3_ep_inc_enq(dep);
trb->size = DWC3_TRB_SIZE_LENGTH(length);
trb->bpl = lower_32_bits(dma);
trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
else
trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS;
+
+ /* always enable Interrupt on Missed ISOC */
+ trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
break;
case USB_ENDPOINT_XFER_BULK:
BUG();
}
+ /* always enable Continue on Short Packet */
+ trb->ctrl |= DWC3_TRB_CTRL_CSP;
+
if (!req->request.no_interrupt && !chain)
- trb->ctrl |= DWC3_TRB_CTRL_IOC;
+ trb->ctrl |= DWC3_TRB_CTRL_IOC | DWC3_TRB_CTRL_ISP_IMI;
- if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
- trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
- trb->ctrl |= DWC3_TRB_CTRL_CSP;
- } else if (last) {
+ if (last)
trb->ctrl |= DWC3_TRB_CTRL_LST;
- }
if (chain)
trb->ctrl |= DWC3_TRB_CTRL_CHN;
trace_dwc3_prepare_trb(dep, trb);
}
-/*
- * dwc3_prepare_trbs - setup TRBs from requests
- * @dep: endpoint for which requests are being prepared
- * @starting: true if the endpoint is idle and no requests are queued.
- *
- * The function goes through the requests list and sets up TRBs for the
- * transfers. The function returns once there are no more TRBs available or
- * it runs out of requests.
- */
-static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
+static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
{
- struct dwc3_request *req, *n;
- u32 trbs_left;
- u32 max;
- unsigned int last_one = 0;
-
- BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
-
- /* the first request must not be queued */
- trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK;
-
- /* Can't wrap around on a non-isoc EP since there's no link TRB */
- if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
- max = DWC3_TRB_NUM - (dep->free_slot & DWC3_TRB_MASK);
- if (trbs_left > max)
- trbs_left = max;
- }
+ struct dwc3_trb *tmp;
/*
- * If busy & slot are equal than it is either full or empty. If we are
- * starting to process requests then we are empty. Otherwise we are
- * full and don't do anything
+ * If enqueue & dequeue are equal than it is either full or empty.
+ *
+ * One way to know for sure is if the TRB right before us has HWO bit
+ * set or not. If it has, then we're definitely full and can't fit any
+ * more transfers in our ring.
*/
- if (!trbs_left) {
- if (!starting)
- return;
- trbs_left = DWC3_TRB_NUM;
- /*
- * In case we start from scratch, we queue the ISOC requests
- * starting from slot 1. This is done because we use ring
- * buffer and have no LST bit to stop us. Instead, we place
- * IOC bit every TRB_NUM/4. We try to avoid having an interrupt
- * after the first request so we start at slot 1 and have
- * 7 requests proceed before we hit the first IOC.
- * Other transfer types don't use the ring buffer and are
- * processed from the first TRB until the last one. Since we
- * don't wrap around we have to start at the beginning.
- */
- if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
- dep->busy_slot = 1;
- dep->free_slot = 1;
- } else {
- dep->busy_slot = 0;
- dep->free_slot = 0;
+ if (dep->trb_enqueue == dep->trb_dequeue) {
+ /* If we're full, enqueue/dequeue are > 0 */
+ if (dep->trb_enqueue) {
+ tmp = &dep->trb_pool[dep->trb_enqueue - 1];
+ if (tmp->ctrl & DWC3_TRB_CTRL_HWO)
+ return 0;
}
+
+ return DWC3_TRB_NUM - 1;
}
- /* The last TRB is a link TRB, not used for xfer */
- if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->endpoint.desc))
- return;
+ return dep->trb_dequeue - dep->trb_enqueue;
+}
- list_for_each_entry_safe(req, n, &dep->request_list, list) {
- unsigned length;
- dma_addr_t dma;
- last_one = false;
+static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
+ struct dwc3_request *req, unsigned int trbs_left)
+{
+ struct usb_request *request = &req->request;
+ struct scatterlist *sg = request->sg;
+ struct scatterlist *s;
+ unsigned int last = false;
+ unsigned int length;
+ dma_addr_t dma;
+ int i;
- if (req->request.num_mapped_sgs > 0) {
- struct usb_request *request = &req->request;
- struct scatterlist *sg = request->sg;
- struct scatterlist *s;
- int i;
+ for_each_sg(sg, s, request->num_mapped_sgs, i) {
+ unsigned chain = true;
- for_each_sg(sg, s, request->num_mapped_sgs, i) {
- unsigned chain = true;
+ length = sg_dma_len(s);
+ dma = sg_dma_address(s);
- length = sg_dma_len(s);
- dma = sg_dma_address(s);
+ if (sg_is_last(s)) {
+ if (list_is_last(&req->list, &dep->pending_list))
+ last = true;
- if (i == (request->num_mapped_sgs - 1) ||
- sg_is_last(s)) {
- if (list_empty(&dep->request_list))
- last_one = true;
- chain = false;
- }
+ chain = false;
+ }
- trbs_left--;
- if (!trbs_left)
- last_one = true;
+ if (!trbs_left)
+ last = true;
- if (last_one)
- chain = false;
+ if (last)
+ chain = false;
- dwc3_prepare_one_trb(dep, req, dma, length,
- last_one, chain, i);
+ dwc3_prepare_one_trb(dep, req, dma, length,
+ last, chain, i);
- if (last_one)
- break;
- }
+ if (last)
+ break;
+ }
+}
- if (last_one)
- break;
- } else {
- dma = req->request.dma;
- length = req->request.length;
- trbs_left--;
+static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
+ struct dwc3_request *req, unsigned int trbs_left)
+{
+ unsigned int last = false;
+ unsigned int length;
+ dma_addr_t dma;
- if (!trbs_left)
- last_one = 1;
+ dma = req->request.dma;
+ length = req->request.length;
- /* Is this the last request? */
- if (list_is_last(&req->list, &dep->request_list))
- last_one = 1;
+ if (!trbs_left)
+ last = true;
- dwc3_prepare_one_trb(dep, req, dma, length,
- last_one, false, 0);
+ /* Is this the last request? */
+ if (list_is_last(&req->list, &dep->pending_list))
+ last = true;
- if (last_one)
- break;
- }
+ dwc3_prepare_one_trb(dep, req, dma, length,
+ last, false, 0);
+}
+
+/*
+ * dwc3_prepare_trbs - setup TRBs from requests
+ * @dep: endpoint for which requests are being prepared
+ *
+ * The function goes through the requests list and sets up TRBs for the
+ * transfers. The function returns once there are no more TRBs available or
+ * it runs out of requests.
+ */
+static void dwc3_prepare_trbs(struct dwc3_ep *dep)
+{
+ struct dwc3_request *req, *n;
+ u32 trbs_left;
+
+ BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
+
+ trbs_left = dwc3_calc_trbs_left(dep);
+
+ list_for_each_entry_safe(req, n, &dep->pending_list, list) {
+ if (req->request.num_mapped_sgs > 0)
+ dwc3_prepare_one_trb_sg(dep, req, trbs_left--);
+ else
+ dwc3_prepare_one_trb_linear(dep, req, trbs_left--);
+
+ if (!trbs_left)
+ return;
}
}
-static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
- int start_new)
+static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param)
{
struct dwc3_gadget_ep_cmd_params params;
struct dwc3_request *req;
struct dwc3 *dwc = dep->dwc;
+ int starting;
int ret;
u32 cmd;
- if (start_new && (dep->flags & DWC3_EP_BUSY)) {
- dwc3_trace(trace_dwc3_gadget, "%s: endpoint busy", dep->name);
- return -EBUSY;
- }
-
- /*
- * If we are getting here after a short-out-packet we don't enqueue any
- * new requests as we try to set the IOC bit only on the last request.
- */
- if (start_new) {
- if (list_empty(&dep->req_queued))
- dwc3_prepare_trbs(dep, start_new);
+ starting = !(dep->flags & DWC3_EP_BUSY);
- /* req points to the first request which will be sent */
- req = next_request(&dep->req_queued);
- } else {
- dwc3_prepare_trbs(dep, start_new);
-
- /*
- * req points to the first request where HWO changed from 0 to 1
- */
- req = next_request(&dep->req_queued);
- }
+ dwc3_prepare_trbs(dep);
+ req = next_request(&dep->started_list);
if (!req) {
dep->flags |= DWC3_EP_PENDING_REQUEST;
return 0;
memset(¶ms, 0, sizeof(params));
- if (start_new) {
+ if (starting) {
params.param0 = upper_32_bits(req->trb_dma);
params.param1 = lower_32_bits(req->trb_dma);
cmd = DWC3_DEPCMD_STARTTRANSFER;
}
cmd |= DWC3_DEPCMD_PARAM(cmd_param);
- ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms);
+ ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms);
if (ret < 0) {
- dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n");
-
/*
* FIXME we need to iterate over the list of requests
* here and stop, unmap, free and del each of the linked
dep->flags |= DWC3_EP_BUSY;
- if (start_new) {
- dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc,
- dep->number);
+ if (starting) {
+ dep->resource_index = dwc3_gadget_ep_get_transfer_index(dep);
WARN_ON_ONCE(!dep->resource_index);
}
{
u32 uf;
- if (list_empty(&dep->request_list)) {
+ if (list_empty(&dep->pending_list)) {
dwc3_trace(trace_dwc3_gadget,
"ISOC ep %s run out for requests",
dep->name);
/* 4 micro frames in the future */
uf = cur_uf + dep->interval * 4;
- __dwc3_gadget_kick_transfer(dep, uf, 1);
+ __dwc3_gadget_kick_transfer(dep, uf);
}
static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
struct dwc3 *dwc = dep->dwc;
int ret;
+ if (!dep->endpoint.desc) {
+ dwc3_trace(trace_dwc3_gadget,
+ "trying to queue request %p to disabled %s\n",
+ &req->request, dep->endpoint.name);
+ return -ESHUTDOWN;
+ }
+
+ if (WARN(req->dep != dep, "request %p belongs to '%s'\n",
+ &req->request, req->dep->name)) {
+ dwc3_trace(trace_dwc3_gadget, "request %p belongs to '%s'\n",
+ &req->request, req->dep->name);
+ return -EINVAL;
+ }
+
+ pm_runtime_get(dwc->dev);
+
req->request.actual = 0;
req->request.status = -EINPROGRESS;
req->direction = dep->direction;
trace_dwc3_ep_queue(req);
+ /*
+ * Per databook, the total size of buffer must be a multiple
+ * of MaxPacketSize for OUT endpoints. And MaxPacketSize is
+ * configed for endpoints in dwc3_gadget_set_ep_config(),
+ * set to usb_endpoint_descriptor->wMaxPacketSize.
+ */
+ if (dep->direction == 0 &&
+ req->request.length % dep->endpoint.desc->wMaxPacketSize)
+ req->request.length = roundup(req->request.length,
+ dep->endpoint.desc->wMaxPacketSize);
+
/*
* We only add to our list of requests now and
* start consuming the list once we get XferNotReady
if (ret)
return ret;
- list_add_tail(&req->list, &dep->request_list);
+ list_add_tail(&req->list, &dep->pending_list);
/*
* If there are no pending requests and the endpoint isn't already
if (!usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
!usb_endpoint_xfer_int(dep->endpoint.desc) &&
!(dep->flags & DWC3_EP_BUSY)) {
- ret = __dwc3_gadget_kick_transfer(dep, 0, true);
+ ret = __dwc3_gadget_kick_transfer(dep, 0);
goto out;
}
* notion of current microframe.
*/
if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
- if (list_empty(&dep->req_queued)) {
+ if (list_empty(&dep->started_list)) {
dwc3_stop_active_transfer(dwc, dep->number, true);
dep->flags = DWC3_EP_ENABLED;
}
return 0;
}
- ret = __dwc3_gadget_kick_transfer(dep, 0, true);
+ ret = __dwc3_gadget_kick_transfer(dep, 0);
if (!ret)
dep->flags &= ~DWC3_EP_PENDING_REQUEST;
(dep->flags & DWC3_EP_BUSY) &&
!(dep->flags & DWC3_EP_MISSED_ISOC)) {
WARN_ON_ONCE(!dep->resource_index);
- ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index,
- false);
+ ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index);
goto out;
}
* handled.
*/
if (dep->stream_capable)
- ret = __dwc3_gadget_kick_transfer(dep, 0, true);
+ ret = __dwc3_gadget_kick_transfer(dep, 0);
out:
if (ret && ret != -EBUSY)
- dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
+ dwc3_trace(trace_dwc3_gadget,
+ "%s: failed to kick transfers\n",
dep->name);
if (ret == -EBUSY)
ret = 0;
return ret;
}
+static void __dwc3_gadget_ep_zlp_complete(struct usb_ep *ep,
+ struct usb_request *request)
+{
+ dwc3_gadget_ep_free_request(ep, request);
+}
+
+static int __dwc3_gadget_ep_queue_zlp(struct dwc3 *dwc, struct dwc3_ep *dep)
+{
+ struct dwc3_request *req;
+ struct usb_request *request;
+ struct usb_ep *ep = &dep->endpoint;
+
+ dwc3_trace(trace_dwc3_gadget, "queueing ZLP\n");
+ request = dwc3_gadget_ep_alloc_request(ep, GFP_ATOMIC);
+ if (!request)
+ return -ENOMEM;
+
+ request->length = 0;
+ request->buf = dwc->zlp_buf;
+ request->complete = __dwc3_gadget_ep_zlp_complete;
+
+ req = to_dwc3_request(request);
+
+ return __dwc3_gadget_ep_queue(dep, req);
+}
+
static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
gfp_t gfp_flags)
{
int ret;
spin_lock_irqsave(&dwc->lock, flags);
- if (!dep->endpoint.desc) {
- dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
- request, ep->name);
- ret = -ESHUTDOWN;
- goto out;
- }
-
- if (WARN(req->dep != dep, "request %p belongs to '%s'\n",
- request, req->dep->name)) {
- ret = -EINVAL;
- goto out;
- }
-
ret = __dwc3_gadget_ep_queue(dep, req);
-out:
+ /*
+ * Okay, here's the thing, if gadget driver has requested for a ZLP by
+ * setting request->zero, instead of doing magic, we will just queue an
+ * extra usb_request ourselves so that it gets handled the same way as
+ * any other request.
+ */
+ if (ret == 0 && request->zero && request->length &&
+ (request->length % ep->desc->wMaxPacketSize == 0))
+ ret = __dwc3_gadget_ep_queue_zlp(dwc, dep);
+
spin_unlock_irqrestore(&dwc->lock, flags);
return ret;
spin_lock_irqsave(&dwc->lock, flags);
- list_for_each_entry(r, &dep->request_list, list) {
+ list_for_each_entry(r, &dep->pending_list, list) {
if (r == req)
break;
}
if (r != req) {
- list_for_each_entry(r, &dep->req_queued, list) {
+ list_for_each_entry(r, &dep->started_list, list) {
if (r == req)
break;
}
if (value) {
if (!protocol && ((dep->direction && dep->flags & DWC3_EP_BUSY) ||
- (!list_empty(&dep->req_queued) ||
- !list_empty(&dep->request_list)))) {
- dev_dbg(dwc->dev, "%s: pending request, cannot halt\n",
+ (!list_empty(&dep->started_list) ||
+ !list_empty(&dep->pending_list)))) {
+ dwc3_trace(trace_dwc3_gadget,
+ "%s: pending request, cannot halt",
dep->name);
return -EAGAIN;
}
- ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
- DWC3_DEPCMD_SETSTALL, ¶ms);
+ ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETSTALL,
+ ¶ms);
if (ret)
dev_err(dwc->dev, "failed to set STALL on %s\n",
dep->name);
else
dep->flags |= DWC3_EP_STALL;
} else {
- ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
- DWC3_DEPCMD_CLEARSTALL, ¶ms);
+
+ ret = dwc3_send_clear_stall_ep_cmd(dep);
if (ret)
dev_err(dwc->dev, "failed to clear STALL on %s\n",
dep->name);
return DWC3_DSTS_SOFFN(reg);
}
-static int dwc3_gadget_wakeup(struct usb_gadget *g)
+static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
{
- struct dwc3 *dwc = gadget_to_dwc(g);
-
unsigned long timeout;
- unsigned long flags;
+ int ret;
u32 reg;
- int ret = 0;
-
u8 link_state;
u8 speed;
- spin_lock_irqsave(&dwc->lock, flags);
-
/*
* According to the Databook Remote wakeup request should
* be issued only when the device is in early suspend state.
speed = reg & DWC3_DSTS_CONNECTSPD;
if (speed == DWC3_DSTS_SUPERSPEED) {
- dev_dbg(dwc->dev, "no wakeup on SuperSpeed\n");
- ret = -EINVAL;
- goto out;
+ dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed\n");
+ return 0;
}
link_state = DWC3_DSTS_USBLNKST(reg);
case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */
break;
default:
- dev_dbg(dwc->dev, "can't wakeup from link state %d\n",
- link_state);
- ret = -EINVAL;
- goto out;
+ dwc3_trace(trace_dwc3_gadget,
+ "can't wakeup from '%s'\n",
+ dwc3_gadget_link_string(link_state));
+ return -EINVAL;
}
ret = dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RECOV);
if (ret < 0) {
dev_err(dwc->dev, "failed to put link in Recovery\n");
- goto out;
+ return ret;
}
/* Recent versions do this automatically */
if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) {
dev_err(dwc->dev, "failed to send remote wakeup\n");
- ret = -EINVAL;
+ return -EINVAL;
}
-out:
+ return 0;
+}
+
+static int dwc3_gadget_wakeup(struct usb_gadget *g)
+{
+ struct dwc3 *dwc = gadget_to_dwc(g);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&dwc->lock, flags);
+ ret = __dwc3_gadget_wakeup(dwc);
spin_unlock_irqrestore(&dwc->lock, flags);
return ret;
u32 reg;
u32 timeout = 500;
+ if (pm_runtime_suspended(dwc->dev))
+ return 0;
+
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
if (is_on) {
if (dwc->revision <= DWC3_REVISION_187A) {
static irqreturn_t dwc3_interrupt(int irq, void *_dwc);
static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc);
-static int dwc3_gadget_start(struct usb_gadget *g,
- struct usb_gadget_driver *driver)
+/**
+ * dwc3_gadget_setup_nump - Calculate and initialize NUMP field of DCFG
+ * dwc: pointer to our context structure
+ *
+ * The following looks like complex but it's actually very simple. In order to
+ * calculate the number of packets we can burst at once on OUT transfers, we're
+ * gonna use RxFIFO size.
+ *
+ * To calculate RxFIFO size we need two numbers:
+ * MDWIDTH = size, in bits, of the internal memory bus
+ * RAM2_DEPTH = depth, in MDWIDTH, of internal RAM2 (where RxFIFO sits)
+ *
+ * Given these two numbers, the formula is simple:
+ *
+ * RxFIFO Size = (RAM2_DEPTH * MDWIDTH / 8) - 24 - 16;
+ *
+ * 24 bytes is for 3x SETUP packets
+ * 16 bytes is a clock domain crossing tolerance
+ *
+ * Given RxFIFO Size, NUMP = RxFIFOSize / 1024;
+ */
+static void dwc3_gadget_setup_nump(struct dwc3 *dwc)
{
- struct dwc3 *dwc = gadget_to_dwc(g);
- struct dwc3_ep *dep;
- unsigned long flags;
- int ret = 0;
- int irq;
- u32 reg;
+ u32 ram2_depth;
+ u32 mdwidth;
+ u32 nump;
+ u32 reg;
- irq = platform_get_irq(to_platform_device(dwc->dev), 0);
- ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
- IRQF_SHARED, "dwc3", dwc);
- if (ret) {
- dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
- irq, ret);
- goto err0;
- }
+ ram2_depth = DWC3_GHWPARAMS7_RAM2_DEPTH(dwc->hwparams.hwparams7);
+ mdwidth = DWC3_GHWPARAMS0_MDWIDTH(dwc->hwparams.hwparams0);
- spin_lock_irqsave(&dwc->lock, flags);
+ nump = ((ram2_depth * mdwidth / 8) - 24 - 16) / 1024;
+ nump = min_t(u32, nump, 16);
- if (dwc->gadget_driver) {
- dev_err(dwc->dev, "%s is already bound to %s\n",
- dwc->gadget.name,
- dwc->gadget_driver->driver.name);
- ret = -EBUSY;
- goto err1;
- }
+ /* update NumP */
+ reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+ reg &= ~DWC3_DCFG_NUMP_MASK;
+ reg |= nump << DWC3_DCFG_NUMP_SHIFT;
+ dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+}
- dwc->gadget_driver = driver;
+static int __dwc3_gadget_start(struct dwc3 *dwc)
+{
+ struct dwc3_ep *dep;
+ int ret = 0;
+ u32 reg;
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
reg &= ~(DWC3_DCFG_SPEED_MASK);
}
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+ /*
+ * We are telling dwc3 that we want to use DCFG.NUMP as ACK TP's NUMP
+ * field instead of letting dwc3 itself calculate that automatically.
+ *
+ * This way, we maximize the chances that we'll be able to get several
+ * bursts of data without going through any sort of endpoint throttling.
+ */
+ reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
+ reg &= ~DWC3_GRXTHRCFG_PKTCNTSEL;
+ dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
+
+ dwc3_gadget_setup_nump(dwc);
+
/* Start with SuperSpeed Default */
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
false);
if (ret) {
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
- goto err2;
+ goto err0;
}
dep = dwc->eps[1];
false);
if (ret) {
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
- goto err3;
+ goto err1;
}
/* begin to receive SETUP packets */
dwc3_gadget_enable_irq(dwc);
- spin_unlock_irqrestore(&dwc->lock, flags);
-
return 0;
-err3:
- __dwc3_gadget_ep_disable(dwc->eps[0]);
-
-err2:
- dwc->gadget_driver = NULL;
-
err1:
- spin_unlock_irqrestore(&dwc->lock, flags);
-
- free_irq(irq, dwc);
+ __dwc3_gadget_ep_disable(dwc->eps[0]);
err0:
return ret;
}
-static int dwc3_gadget_stop(struct usb_gadget *g)
+static int dwc3_gadget_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
struct dwc3 *dwc = gadget_to_dwc(g);
unsigned long flags;
+ int ret = 0;
int irq;
+ irq = platform_get_irq(to_platform_device(dwc->dev), 0);
+ ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
+ IRQF_SHARED, "dwc3", dwc->ev_buf);
+ if (ret) {
+ dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
+ irq, ret);
+ goto err0;
+ }
+ dwc->irq_gadget = irq;
+
spin_lock_irqsave(&dwc->lock, flags);
+ if (dwc->gadget_driver) {
+ dev_err(dwc->dev, "%s is already bound to %s\n",
+ dwc->gadget.name,
+ dwc->gadget_driver->driver.name);
+ ret = -EBUSY;
+ goto err1;
+ }
+
+ dwc->gadget_driver = driver;
+
+ if (pm_runtime_active(dwc->dev))
+ __dwc3_gadget_start(dwc);
+
+ spin_unlock_irqrestore(&dwc->lock, flags);
+
+ return 0;
+
+err1:
+ spin_unlock_irqrestore(&dwc->lock, flags);
+ free_irq(irq, dwc);
+
+err0:
+ return ret;
+}
+static void __dwc3_gadget_stop(struct dwc3 *dwc)
+{
dwc3_gadget_disable_irq(dwc);
__dwc3_gadget_ep_disable(dwc->eps[0]);
__dwc3_gadget_ep_disable(dwc->eps[1]);
+}
- dwc->gadget_driver = NULL;
+static int dwc3_gadget_stop(struct usb_gadget *g)
+{
+ struct dwc3 *dwc = gadget_to_dwc(g);
+ unsigned long flags;
+ spin_lock_irqsave(&dwc->lock, flags);
+ __dwc3_gadget_stop(dwc);
+ dwc->gadget_driver = NULL;
spin_unlock_irqrestore(&dwc->lock, flags);
- irq = platform_get_irq(to_platform_device(dwc->dev), 0);
- free_irq(irq, dwc);
+ free_irq(dwc->irq_gadget, dwc->ev_buf);
return 0;
}
u8 i;
for (i = 0; i < num; i++) {
- u8 epnum = (i << 1) | (!!direction);
+ u8 epnum = (i << 1) | (direction ? 1 : 0);
dep = kzalloc(sizeof(*dep), GFP_KERNEL);
if (!dep)
dep->dwc = dwc;
dep->number = epnum;
dep->direction = !!direction;
+ dep->regs = dwc->regs + DWC3_DEP_BASE(epnum);
dwc->eps[epnum] = dep;
snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1,
(epnum & 1) ? "in" : "out");
dep->endpoint.name = dep->name;
+ spin_lock_init(&dep->lock);
dwc3_trace(trace_dwc3_gadget, "initializing %s", dep->name);
dep->endpoint.caps.dir_in = !!direction;
dep->endpoint.caps.dir_out = !direction;
- INIT_LIST_HEAD(&dep->request_list);
- INIT_LIST_HEAD(&dep->req_queued);
+ INIT_LIST_HEAD(&dep->pending_list);
+ INIT_LIST_HEAD(&dep->started_list);
}
return 0;
if (count) {
trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size);
if (trb_status == DWC3_TRBSTS_MISSED_ISOC) {
- dev_dbg(dwc->dev, "incomplete IN transfer %s\n",
+ dwc3_trace(trace_dwc3_gadget,
+ "%s: incomplete IN transfer\n",
dep->name);
/*
* If missed isoc occurred and there is
* If there are still queued request
* then wait, do not issue either END
* or UPDATE TRANSFER, just attach next
- * request in request_list during
+ * request in pending_list during
* giveback.If any future queued request
* is successfully transferred then we
* will issue UPDATE TRANSFER for all
- * request in the request_list.
+ * request in the pending_list.
*/
dep->flags |= DWC3_EP_MISSED_ISOC;
} else {
int ret;
do {
- req = next_request(&dep->req_queued);
- if (!req) {
- WARN_ON_ONCE(1);
+ req = next_request(&dep->started_list);
+ if (WARN_ON_ONCE(!req))
return 1;
- }
+
i = 0;
do {
- slot = req->start_slot + i;
- if ((slot == DWC3_TRB_NUM - 1) &&
- usb_endpoint_xfer_isoc(dep->endpoint.desc))
+ slot = req->first_trb_index + i;
+ if (slot == DWC3_TRB_NUM - 1)
slot++;
slot %= DWC3_TRB_NUM;
trb = &dep->trb_pool[slot];
break;
} while (1);
+ /*
+ * Our endpoint might get disabled by another thread during
+ * dwc3_gadget_giveback(). If that happens, we're just gonna return 1
+ * early on so DWC3_EP_BUSY flag gets cleared
+ */
+ if (!dep->endpoint.desc)
+ return 1;
+
if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
- list_empty(&dep->req_queued)) {
- if (list_empty(&dep->request_list)) {
+ list_empty(&dep->started_list)) {
+ if (list_empty(&dep->pending_list)) {
/*
* If there is no entry in request list then do
* not issue END TRANSFER now. Just set PENDING
return 1;
}
+ if (usb_endpoint_xfer_isoc(dep->endpoint.desc))
+ if ((event->status & DEPEVT_STATUS_IOC) &&
+ (trb->ctrl & DWC3_TRB_CTRL_IOC))
+ return 0;
return 1;
}
status = -ECONNRESET;
clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
- if (clean_busy && (is_xfer_complete ||
+ if (clean_busy && (!dep->endpoint.desc || is_xfer_complete ||
usb_endpoint_xfer_isoc(dep->endpoint.desc)))
dep->flags &= ~DWC3_EP_BUSY;
if (!(dep->flags & DWC3_EP_ENABLED))
continue;
- if (!list_empty(&dep->req_queued))
+ if (!list_empty(&dep->started_list))
return;
}
dwc->u1u2 = 0;
}
+ /*
+ * Our endpoint might get disabled by another thread during
+ * dwc3_gadget_giveback(). If that happens, we're just gonna return 1
+ * early on so DWC3_EP_BUSY flag gets cleared
+ */
+ if (!dep->endpoint.desc)
+ return;
+
if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
int ret;
- ret = __dwc3_gadget_kick_transfer(dep, 0, is_xfer_complete);
+ ret = __dwc3_gadget_kick_transfer(dep, 0);
if (!ret || ret == -EBUSY)
return;
}
dep->resource_index = 0;
if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
- dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n",
+ dwc3_trace(trace_dwc3_gadget,
+ "%s is an Isochronous endpoint\n",
dep->name);
return;
}
dep->name, active ? "Transfer Active"
: "Transfer Not Active");
- ret = __dwc3_gadget_kick_transfer(dep, 0, !active);
+ ret = __dwc3_gadget_kick_transfer(dep, 0);
if (!ret || ret == -EBUSY)
return;
- dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
+ dwc3_trace(trace_dwc3_gadget,
+ "%s: failed to kick transfers\n",
dep->name);
}
case DEPEVT_STREAMEVT_NOTFOUND:
/* FALLTHROUGH */
default:
- dev_dbg(dwc->dev, "Couldn't find suitable stream\n");
+ dwc3_trace(trace_dwc3_gadget,
+ "unable to find suitable stream\n");
}
break;
case DWC3_DEPEVT_RXTXFIFOEVT:
- dev_dbg(dwc->dev, "%s FIFO Overrun\n", dep->name);
+ dwc3_trace(trace_dwc3_gadget, "%s FIFO Overrun\n", dep->name);
break;
case DWC3_DEPEVT_EPCMDCMPLT:
dwc3_trace(trace_dwc3_gadget, "Endpoint Command Complete");
cmd |= DWC3_DEPCMD_CMDIOC;
cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
memset(¶ms, 0, sizeof(params));
- ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms);
+ ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms);
WARN_ON_ONCE(ret);
dep->resource_index = 0;
dep->flags &= ~DWC3_EP_BUSY;
for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
struct dwc3_ep *dep;
- struct dwc3_gadget_ep_cmd_params params;
int ret;
dep = dwc->eps[epnum];
dep->flags &= ~DWC3_EP_STALL;
- memset(¶ms, 0, sizeof(params));
- ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
- DWC3_DEPCMD_CLEARSTALL, ¶ms);
+ ret = dwc3_send_clear_stall_ep_cmd(dep);
WARN_ON_ONCE(ret);
}
}
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->setup_packet_pending = false;
usb_gadget_set_state(&dwc->gadget, USB_STATE_NOTATTACHED);
+
+ dwc->connected = false;
}
static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
{
u32 reg;
+ dwc->connected = true;
+
/*
* WORKAROUND: DWC3 revisions <1.88a have an issue which
* would cause a missing Disconnect Event if there's a
*
* Our suggested workaround is to follow the Disconnect
* Event steps here, instead, based on a setup_packet_pending
- * flag. Such flag gets set whenever we have a XferNotReady
- * event on EP0 and gets cleared on XferComplete for the
+ * flag. Such flag gets set whenever we have a SETUP_PENDING
+ * status for EP0 TRBs and gets cleared on XferComplete for the
* same endpoint.
*
* Refers to:
* implemented.
*/
- dwc->gadget_driver->resume(&dwc->gadget);
+ if (dwc->gadget_driver && dwc->gadget_driver->resume) {
+ spin_unlock(&dwc->lock);
+ dwc->gadget_driver->resume(&dwc->gadget);
+ spin_lock(&dwc->lock);
+ }
}
static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
}
}
-static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
+static irqreturn_t dwc3_process_event_buf(struct dwc3_event_buffer *evt)
{
- struct dwc3_event_buffer *evt;
+ struct dwc3 *dwc = evt->dwc;
irqreturn_t ret = IRQ_NONE;
int left;
u32 reg;
- evt = dwc->ev_buffs[buf];
left = evt->count;
if (!(evt->flags & DWC3_EVENT_PENDING))
evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE;
left -= 4;
- dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(buf), 4);
+ dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 4);
}
evt->count = 0;
ret = IRQ_HANDLED;
/* Unmask interrupt */
- reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(buf));
+ reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(0));
reg &= ~DWC3_GEVNTSIZ_INTMASK;
- dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(buf), reg);
+ dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), reg);
return ret;
}
-static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc)
+static irqreturn_t dwc3_thread_interrupt(int irq, void *_evt)
{
- struct dwc3 *dwc = _dwc;
+ struct dwc3_event_buffer *evt = _evt;
+ struct dwc3 *dwc = evt->dwc;
unsigned long flags;
irqreturn_t ret = IRQ_NONE;
- int i;
spin_lock_irqsave(&dwc->lock, flags);
-
- for (i = 0; i < dwc->num_event_buffers; i++)
- ret |= dwc3_process_event_buf(dwc, i);
-
+ ret = dwc3_process_event_buf(evt);
spin_unlock_irqrestore(&dwc->lock, flags);
return ret;
}
-static irqreturn_t dwc3_check_event_buf(struct dwc3 *dwc, u32 buf)
+static irqreturn_t dwc3_check_event_buf(struct dwc3_event_buffer *evt)
{
- struct dwc3_event_buffer *evt;
+ struct dwc3 *dwc = evt->dwc;
u32 count;
u32 reg;
- evt = dwc->ev_buffs[buf];
+ if (pm_runtime_suspended(dwc->dev)) {
+ pm_runtime_get(dwc->dev);
+ disable_irq_nosync(dwc->irq_gadget);
+ dwc->pending_events = true;
+ return IRQ_HANDLED;
+ }
- count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf));
+ count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
count &= DWC3_GEVNTCOUNT_MASK;
if (!count)
return IRQ_NONE;
evt->flags |= DWC3_EVENT_PENDING;
/* Mask interrupt */
- reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(buf));
+ reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(0));
reg |= DWC3_GEVNTSIZ_INTMASK;
- dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(buf), reg);
+ dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), reg);
return IRQ_WAKE_THREAD;
}
-static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
+static irqreturn_t dwc3_interrupt(int irq, void *_evt)
{
- struct dwc3 *dwc = _dwc;
- int i;
- irqreturn_t ret = IRQ_NONE;
+ struct dwc3_event_buffer *evt = _evt;
- for (i = 0; i < dwc->num_event_buffers; i++) {
- irqreturn_t status;
-
- status = dwc3_check_event_buf(dwc, i);
- if (status == IRQ_WAKE_THREAD)
- ret = status;
- }
-
- return ret;
+ return dwc3_check_event_buf(evt);
}
/**
goto err3;
}
+ dwc->zlp_buf = kzalloc(DWC3_ZLP_BUF_SIZE, GFP_KERNEL);
+ if (!dwc->zlp_buf) {
+ ret = -ENOMEM;
+ goto err4;
+ }
+
dwc->gadget.ops = &dwc3_gadget_ops;
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->gadget.sg_supported = true;
dwc->gadget.name = "dwc3-gadget";
+ dwc->gadget.is_otg = dwc->dr_mode == USB_DR_MODE_OTG;
/*
* FIXME We might be setting max_speed to <SUPER, however versions
ret = dwc3_gadget_init_endpoints(dwc);
if (ret)
- goto err4;
+ goto err5;
ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
if (ret) {
dev_err(dwc->dev, "failed to register udc\n");
- goto err4;
+ goto err5;
}
return 0;
+err5:
+ kfree(dwc->zlp_buf);
+
err4:
dwc3_gadget_free_endpoints(dwc);
dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE,
dwc->ep0_bounce, dwc->ep0_bounce_addr);
kfree(dwc->setup_buf);
+ kfree(dwc->zlp_buf);
dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
dwc->ep0_trb, dwc->ep0_trb_addr);
int dwc3_gadget_suspend(struct dwc3 *dwc)
{
- if (dwc->pullups_connected) {
- dwc3_gadget_disable_irq(dwc);
- dwc3_gadget_run_stop(dwc, true, true);
- }
+ int ret;
- __dwc3_gadget_ep_disable(dwc->eps[0]);
- __dwc3_gadget_ep_disable(dwc->eps[1]);
+ if (!dwc->gadget_driver)
+ return 0;
+
+ ret = dwc3_gadget_run_stop(dwc, false, false);
+ if (ret < 0)
+ return ret;
- dwc->dcfg = dwc3_readl(dwc->regs, DWC3_DCFG);
+ dwc3_disconnect_gadget(dwc);
+ __dwc3_gadget_stop(dwc);
return 0;
}
int dwc3_gadget_resume(struct dwc3 *dwc)
{
- struct dwc3_ep *dep;
int ret;
- /* Start with SuperSpeed Default */
- dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
+ if (!dwc->gadget_driver)
+ return 0;
- dep = dwc->eps[0];
- ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
- false);
- if (ret)
+ ret = __dwc3_gadget_start(dwc);
+ if (ret < 0)
goto err0;
- dep = dwc->eps[1];
- ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
- false);
- if (ret)
+ ret = dwc3_gadget_run_stop(dwc, true, false);
+ if (ret < 0)
goto err1;
- /* begin to receive SETUP packets */
- dwc->ep0state = EP0_SETUP_PHASE;
- dwc3_ep0_out_start(dwc);
-
- dwc3_writel(dwc->regs, DWC3_DCFG, dwc->dcfg);
-
- if (dwc->pullups_connected) {
- dwc3_gadget_enable_irq(dwc);
- dwc3_gadget_run_stop(dwc, true, false);
- }
-
return 0;
err1:
- __dwc3_gadget_ep_disable(dwc->eps[0]);
+ __dwc3_gadget_stop(dwc);
err0:
return ret;
}
+
+void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
+{
+ if (dwc->pending_events) {
+ dwc3_interrupt(dwc->irq_gadget, dwc->ev_buf);
+ dwc->pending_events = false;
+ enable_irq(dwc->irq_gadget);
+ }
+}
projects / firefly-linux-kernel-4.4.55.git / blobdiff