#define DWC3_MSG_MAX 500
/* Global constants */
+#define DWC3_ZLP_BUF_SIZE 1024 /* size of a superspeed bulk */
#define DWC3_EP0_BOUNCE_SIZE 512
#define DWC3_ENDPOINTS_NUM 32
#define DWC3_XHCI_RESOURCES_NUM 2
#define DWC3_SCRATCHBUF_SIZE 4096 /* each buffer is assumed to be 4KiB */
-#define DWC3_EVENT_SIZE 4 /* bytes */
-#define DWC3_EVENT_MAX_NUM 64 /* 2 events/endpoint */
-#define DWC3_EVENT_BUFFERS_SIZE (DWC3_EVENT_SIZE * DWC3_EVENT_MAX_NUM)
+#define DWC3_EVENT_BUFFERS_SIZE 4096
#define DWC3_EVENT_TYPE_MASK 0xfe
#define DWC3_EVENT_TYPE_DEV 0
#define DWC3_GCTL 0xc110
#define DWC3_GEVTEN 0xc114
#define DWC3_GSTS 0xc118
+#define DWC3_GUCTL1 0xc11c
#define DWC3_GSNPSID 0xc120
#define DWC3_GGPIO 0xc124
#define DWC3_GUID 0xc128
#define DWC3_DGCMDPAR 0xc710
#define DWC3_DGCMD 0xc714
#define DWC3_DALEPENA 0xc720
-#define DWC3_DEPCMDPAR2(n) (0xc800 + (n * 0x10))
-#define DWC3_DEPCMDPAR1(n) (0xc804 + (n * 0x10))
-#define DWC3_DEPCMDPAR0(n) (0xc808 + (n * 0x10))
-#define DWC3_DEPCMD(n) (0xc80c + (n * 0x10))
+
+#define DWC3_DEP_BASE(n) (0xc800 + (n * 0x10))
+#define DWC3_DEPCMDPAR2 0x00
+#define DWC3_DEPCMDPAR1 0x04
+#define DWC3_DEPCMDPAR0 0x08
+#define DWC3_DEPCMD 0x0c
/* OTG Registers */
#define DWC3_OCFG 0xcc00
/* Bit fields */
+/* Global Debug Queue/FIFO Space Available Register */
+#define DWC3_GDBGFIFOSPACE_NUM(n) ((n) & 0x1f)
+#define DWC3_GDBGFIFOSPACE_TYPE(n) (((n) << 5) & 0x1e0)
+#define DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(n) (((n) >> 16) & 0xffff)
+
+#define DWC3_TXFIFOQ 1
+#define DWC3_RXFIFOQ 3
+#define DWC3_TXREQQ 5
+#define DWC3_RXREQQ 7
+#define DWC3_RXINFOQ 9
+#define DWC3_DESCFETCHQ 13
+#define DWC3_EVENTQ 15
+
+/* Global RX Threshold Configuration Register */
+#define DWC3_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 19)
+#define DWC3_GRXTHRCFG_RXPKTCNT(n) (((n) & 0xf) << 24)
+#define DWC3_GRXTHRCFG_PKTCNTSEL (1 << 29)
+
/* Global Configuration Register */
#define DWC3_GCTL_PWRDNSCALE(n) ((n) << 19)
#define DWC3_GCTL_U2RSTECN (1 << 16)
/* Global USB2 PHY Configuration Register */
#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
+#define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS (1 << 30)
#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
#define DWC3_GUSB2PHYCFG_ULPI_UTMI (1 << 4)
#define DWC3_GUSB2PHYCFG_ENBLSLPM (1 << 8)
+#define DWC3_GUSB2PHYCFG_PHYIF(n) (n << 3)
+#define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM(n) (n << 10)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK DWC3_GUSB2PHYCFG_USBTRDTIM(0xf)
+#define USBTRDTIM_UTMI_8_BIT 9
+#define USBTRDTIM_UTMI_16_BIT 5
+#define UTMI_PHYIF_16_BIT 1
+#define UTMI_PHYIF_8_BIT 0
/* Global USB2 PHY Vendor Control Register */
#define DWC3_GUSB2PHYACC_NEWREGREQ (1 << 25)
/* Global USB3 PIPE Control Register */
#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
#define DWC3_GUSB3PIPECTL_U2SSINP3OK (1 << 29)
+#define DWC3_GUSB3PIPECTL_DISRXDETINP3 (1 << 28)
#define DWC3_GUSB3PIPECTL_REQP1P2P3 (1 << 24)
#define DWC3_GUSB3PIPECTL_DEP1P2P3(n) ((n) << 19)
#define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK DWC3_GUSB3PIPECTL_DEP1P2P3(7)
#define DWC3_GEVNTSIZ_INTMASK (1 << 31)
#define DWC3_GEVNTSIZ_SIZE(n) ((n) & 0xffff)
+/* Global HWPARAMS0 Register */
+#define DWC3_GHWPARAMS0_USB3_MODE(n) ((n) & 0x3)
+#define DWC3_GHWPARAMS0_MBUS_TYPE(n) (((n) >> 3) & 0x7)
+#define DWC3_GHWPARAMS0_SBUS_TYPE(n) (((n) >> 6) & 0x3)
+#define DWC3_GHWPARAMS0_MDWIDTH(n) (((n) >> 8) & 0xff)
+#define DWC3_GHWPARAMS0_SDWIDTH(n) (((n) >> 16) & 0xff)
+#define DWC3_GHWPARAMS0_AWIDTH(n) (((n) >> 24) & 0xff)
+
/* Global HWPARAMS1 Register */
#define DWC3_GHWPARAMS1_EN_PWROPT(n) (((n) & (3 << 24)) >> 24)
#define DWC3_GHWPARAMS1_EN_PWROPT_NO 0
/* Global HWPARAMS6 Register */
#define DWC3_GHWPARAMS6_EN_FPGA (1 << 7)
+/* Global HWPARAMS7 Register */
+#define DWC3_GHWPARAMS7_RAM1_DEPTH(n) ((n) & 0xffff)
+#define DWC3_GHWPARAMS7_RAM2_DEPTH(n) (((n) >> 16) & 0xffff)
+
/* Global Frame Length Adjustment Register */
#define DWC3_GFLADJ_30MHZ_SDBND_SEL (1 << 7)
#define DWC3_GFLADJ_30MHZ_MASK 0x3f
#define DWC3_DCFG_LOWSPEED (2 << 0)
#define DWC3_DCFG_FULLSPEED1 (3 << 0)
+#define DWC3_DCFG_NUMP_SHIFT 17
+#define DWC3_DCFG_NUMP(n) (((n) >> DWC3_DCFG_NUMP_SHIFT) & 0x1f)
+#define DWC3_DCFG_NUMP_MASK (0x1f << DWC3_DCFG_NUMP_SHIFT)
#define DWC3_DCFG_LPM_CAP (1 << 22)
/* Device Control Register */
#define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
#define DWC3_DEPCMD_STATUS(x) (((x) >> 12) & 0x0F)
#define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11)
+#define DWC3_DEPCMD_CLEARPENDIN (1 << 11)
#define DWC3_DEPCMD_CMDACT (1 << 10)
#define DWC3_DEPCMD_CMDIOC (1 << 8)
#define DWC3_EP_DIRECTION_TX true
#define DWC3_EP_DIRECTION_RX false
-#define DWC3_TRB_NUM 32
-#define DWC3_TRB_MASK (DWC3_TRB_NUM - 1)
+#define DWC3_TRB_NUM 256
/**
* struct dwc3_ep - device side endpoint representation
* @endpoint: usb endpoint
- * @request_list: list of requests for this endpoint
- * @req_queued: list of requests on this ep which have TRBs setup
+ * @pending_list: list of pending requests for this endpoint
+ * @started_list: list of started requests on this endpoint
+ * @lock: spinlock for endpoint request queue traversal
+ * @regs: pointer to first endpoint register
* @trb_pool: array of transaction buffers
* @trb_pool_dma: dma address of @trb_pool
- * @free_slot: next slot which is going to be used
- * @busy_slot: first slot which is owned by HW
+ * @trb_enqueue: enqueue 'pointer' into TRB array
+ * @trb_dequeue: dequeue 'pointer' into TRB array
* @desc: usb_endpoint_descriptor pointer
* @dwc: pointer to DWC controller
* @saved_state: ep state saved during hibernation
* @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK
* @resource_index: Resource transfer index
* @interval: the interval on which the ISOC transfer is started
+ * @allocated_requests: number of requests allocated
+ * @queued_requests: number of requests queued for transfer
* @name: a human readable name e.g. ep1out-bulk
* @direction: true for TX, false for RX
* @stream_capable: true when streams are enabled
*/
struct dwc3_ep {
struct usb_ep endpoint;
- struct list_head request_list;
- struct list_head req_queued;
+ struct list_head pending_list;
+ struct list_head started_list;
+
+ spinlock_t lock;
+ void __iomem *regs;
struct dwc3_trb *trb_pool;
dma_addr_t trb_pool_dma;
- u32 free_slot;
- u32 busy_slot;
const struct usb_ss_ep_comp_descriptor *comp_desc;
struct dwc3 *dwc;
/* This last one is specific to EP0 */
#define DWC3_EP0_DIR_IN (1 << 31)
+ /*
+ * IMPORTANT: we *know* we have 256 TRBs in our @trb_pool, so we will
+ * use a u8 type here. If anybody decides to increase number of TRBs to
+ * anything larger than 256 - I can't see why people would want to do
+ * this though - then this type needs to be changed.
+ *
+ * By using u8 types we ensure that our % operator when incrementing
+ * enqueue and dequeue get optimized away by the compiler.
+ */
+ u8 trb_enqueue;
+ u8 trb_dequeue;
+
u8 number;
u8 type;
u8 resource_index;
+ u32 allocated_requests;
+ u32 queued_requests;
u32 interval;
char name[20];
#define DWC3_TRB_CTRL_IOC (1 << 11)
#define DWC3_TRB_CTRL_SID_SOFN(n) (((n) & 0xffff) << 14)
+#define DWC3_TRBCTL_TYPE(n) ((n) & (0x3f << 4))
#define DWC3_TRBCTL_NORMAL DWC3_TRB_CTRL_TRBCTL(1)
#define DWC3_TRBCTL_CONTROL_SETUP DWC3_TRB_CTRL_TRBCTL(2)
#define DWC3_TRBCTL_CONTROL_STATUS2 DWC3_TRB_CTRL_TRBCTL(3)
/* HWPARAMS7 */
#define DWC3_RAM1_DEPTH(n) ((n) & 0xffff)
+/**
+ * struct dwc3_request - representation of a transfer request
+ * @request: struct usb_request to be transferred
+ * @list: a list_head used for request queueing
+ * @dep: struct dwc3_ep owning this request
+ * @first_trb_index: index to first trb used by this request
+ * @epnum: endpoint number to which this request refers
+ * @trb: pointer to struct dwc3_trb
+ * @trb_dma: DMA address of @trb
+ * @direction: IN or OUT direction flag
+ * @mapped: true when request has been dma-mapped
+ * @queued: true when request has been queued to HW
+ */
struct dwc3_request {
struct usb_request request;
struct list_head list;
struct dwc3_ep *dep;
- u32 start_slot;
+ u8 first_trb_index;
u8 epnum;
struct dwc3_trb *trb;
dma_addr_t trb_dma;
unsigned direction:1;
unsigned mapped:1;
- unsigned queued:1;
+ unsigned started:1;
};
/*
* @ctrl_req: usb control request which is used for ep0
* @ep0_trb: trb which is used for the ctrl_req
* @ep0_bounce: bounce buffer for ep0
+ * @zlp_buf: used when request->zero is set
* @setup_buf: used while precessing STD USB requests
* @ctrl_req_addr: dma address of ctrl_req
* @ep0_trb: dma address of ep0_trb
* @gadget_driver: pointer to the gadget driver
* @regs: base address for our registers
* @regs_size: address space size
+ * @fladj: frame length adjustment
+ * @irq_gadget: peripheral controller's IRQ number
* @nr_scratch: number of scratch buffers
- * @num_event_buffers: calculated number of event buffers
* @u1u2: only used on revisions <1.83a for workaround
* @maximum_speed: maximum speed requested (mainly for testing purposes)
* @revision: revision register contents
* @dr_mode: requested mode of operation
+ * @hsphy_mode: UTMI phy mode, one of following:
+ * - USBPHY_INTERFACE_MODE_UTMI
+ * - USBPHY_INTERFACE_MODE_UTMIW
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
* @usb2_generic_phy: pointer to USB2 PHY
* @lpm_nyet_threshold: LPM NYET response threshold
* @hird_threshold: HIRD threshold
* @hsphy_interface: "utmi" or "ulpi"
+ * @connected: true when we're connected to a host, false otherwise
* @delayed_status: true when gadget driver asks for delayed status
* @ep0_bounced: true when we used bounce buffer
* @ep0_expect_in: true when we expect a DATA IN transfer
* 0 - utmi_sleep_n
* 1 - utmi_l1_suspend_n
* @is_fpga: true when we are using the FPGA board
- * @needs_fifo_resize: not all users might want fifo resizing, flag it
+ * @pending_events: true when we have pending IRQs to be handled
* @pullups_connected: true when Run/Stop bit is set
- * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes.
* @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
* @start_config_issued: true when StartConfig command has been issued
* @three_stage_setup: set if we perform a three phase setup
* @del_phy_power_chg_quirk: set if we enable delay phy power change quirk
* @lfps_filter_quirk: set if we enable LFPS filter quirk
* @rx_detect_poll_quirk: set if we enable rx_detect to polling lfps quirk
+ * @dis_u3_autosuspend_quirk: set if the we disable usb3 autosuspend
* @dis_u3_susphy_quirk: set if we disable usb3 suspend phy
* @dis_u2_susphy_quirk: set if we disable usb2 suspend phy
* @dis_enblslpm_quirk: set if we clear enblslpm in GUSB2PHYCFG,
* disabling the suspend signal to the PHY.
+ * @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists
+ * in GUSB2PHYCFG, specify that USB2 PHY doesn't
+ * provide a free-running PHY clock.
+ * @dis_del_phy_power_chg_quirk: set if we disable delay phy power
+ * change quirk.
+ * @xhci_slow_suspend_quirk: set if need an extraordinary delay to wait
+ * for xHC enter the Halted state after the Run/Stop
+ * (R/S) bit is cleared to '0'.
* @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
* @tx_de_emphasis: Tx de-emphasis value
* 0 - -6dB de-emphasis
struct usb_ctrlrequest *ctrl_req;
struct dwc3_trb *ep0_trb;
void *ep0_bounce;
+ void *zlp_buf;
void *scratchbuf;
u8 *setup_buf;
dma_addr_t ctrl_req_addr;
struct platform_device *xhci;
struct resource xhci_resources[DWC3_XHCI_RESOURCES_NUM];
- struct dwc3_event_buffer **ev_buffs;
+ struct dwc3_event_buffer *ev_buf;
struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM];
struct usb_gadget gadget;
size_t regs_size;
enum usb_dr_mode dr_mode;
+ enum usb_phy_interface hsphy_mode;
- /* used for suspend/resume */
- u32 dcfg;
- u32 gctl;
-
+ u32 fladj;
+ u32 irq_gadget;
u32 nr_scratch;
- u32 num_event_buffers;
u32 u1u2;
u32 maximum_speed;
* just so dwc31 revisions are always larger than dwc3.
*/
#define DWC3_REVISION_IS_DWC31 0x80000000
-#define DWC3_USB31_REVISION_110A (0x3131302a | DWC3_REVISION_IS_USB31)
+#define DWC3_USB31_REVISION_110A (0x3131302a | DWC3_REVISION_IS_DWC31)
enum dwc3_ep0_next ep0_next_event;
enum dwc3_ep0_state ep0state;
const char *hsphy_interface;
+ unsigned connected:1;
unsigned delayed_status:1;
unsigned ep0_bounced:1;
unsigned ep0_expect_in:1;
unsigned has_lpm_erratum:1;
unsigned is_utmi_l1_suspend:1;
unsigned is_fpga:1;
- unsigned needs_fifo_resize:1;
+ unsigned pending_events:1;
unsigned pullups_connected:1;
- unsigned resize_fifos:1;
unsigned setup_packet_pending:1;
- unsigned start_config_issued:1;
unsigned three_stage_setup:1;
unsigned usb3_lpm_capable:1;
unsigned del_phy_power_chg_quirk:1;
unsigned lfps_filter_quirk:1;
unsigned rx_detect_poll_quirk:1;
+ unsigned dis_u3_autosuspend_quirk:1;
unsigned dis_u3_susphy_quirk:1;
unsigned dis_u2_susphy_quirk:1;
unsigned dis_enblslpm_quirk:1;
+ unsigned dis_rxdet_inp3_quirk:1;
+ unsigned dis_u2_freeclk_exists_quirk:1;
+ unsigned dis_del_phy_power_chg_quirk:1;
+ unsigned xhci_slow_suspend_quirk:1;
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
#define DEPEVT_STATUS_CONTROL_DATA 1
#define DEPEVT_STATUS_CONTROL_STATUS 2
+/* In response to Start Transfer */
+#define DEPEVT_TRANSFER_NO_RESOURCE 1
+#define DEPEVT_TRANSFER_BUS_EXPIRY 2
+
u32 parameters:16;
} __packed;
/* prototypes */
void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
-int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc);
+u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type);
+
+/* check whether we are on the DWC_usb31 core */
+static inline bool dwc3_is_usb31(struct dwc3 *dwc)
+{
+ return !!(dwc->revision & DWC3_REVISION_IS_DWC31);
+}
#if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
int dwc3_host_init(struct dwc3 *dwc);
int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
int dwc3_gadget_get_link_state(struct dwc3 *dwc);
int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
-int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
- unsigned cmd, struct dwc3_gadget_ep_cmd_params *params);
+int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
+ struct dwc3_gadget_ep_cmd_params *params);
int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param);
#else
static inline int dwc3_gadget_init(struct dwc3 *dwc)
enum dwc3_link_state state)
{ return 0; }
-static inline int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
- unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
+static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
+ struct dwc3_gadget_ep_cmd_params *params)
{ return 0; }
static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,
int cmd, u32 param)
#if !IS_ENABLED(CONFIG_USB_DWC3_HOST)
int dwc3_gadget_suspend(struct dwc3 *dwc);
int dwc3_gadget_resume(struct dwc3 *dwc);
+void dwc3_gadget_process_pending_events(struct dwc3 *dwc);
#else
static inline int dwc3_gadget_suspend(struct dwc3 *dwc)
{
{
return 0;
}
+
+static inline void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
+{
+}
#endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */
#if IS_ENABLED(CONFIG_USB_DWC3_ULPI)
projects / firefly-linux-kernel-4.4.55.git / blobdiff