serial: sccnxp: Allows the driver to be compiled as a module

[firefly-linux-kernel-4.4.55.git] / drivers / tty / serial / Kconfig

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 4720b4ba096a5d7b2efc6cca8aca82dd75c127e2..2a53be5f010d9af3ee0ed1950f5951524e9a7cb3 100644 (file)
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -141,6 +141,25 @@ config SERIAL_ATMEL_TTYAT
 
          Say Y if you have an external 8250/16C550 UART.  If unsure, say N.
 
+config SERIAL_KGDB_NMI
+       bool "Serial console over KGDB NMI debugger port"
+       depends on KGDB_SERIAL_CONSOLE
+       help
+         This special driver allows you to temporary use NMI debugger port
+         as a normal console (assuming that the port is attached to KGDB).
+
+         Unlike KDB's disable_nmi command, with this driver you are always
+         able to go back to the debugger using KGDB escape sequence ($3#33).
+         This is because this console driver processes the input in NMI
+         context, and thus is able to intercept the magic sequence.
+
+         Note that since the console interprets input and uses polling
+         communication methods, for things like PPP you still must fully
+         detach debugger port from the KGDB NMI (i.e. disable_nmi), and
+         use raw console.
+
+         If unsure, say N.
+
 config SERIAL_KS8695
        bool "Micrel KS8695 (Centaur) serial port support"
        depends on ARCH_KS8695
@@ -257,12 +276,19 @@ config SERIAL_MAX3100
        help
          MAX3100 chip support
 
-config SERIAL_MAX3107
-       tristate "MAX3107 support"
+config SERIAL_MAX310X
+       bool "MAX310X support"
        depends on SPI
        select SERIAL_CORE
+       select REGMAP_SPI if SPI
+       default n
        help
-         MAX3107 chip support
+         This selects support for an advanced UART from Maxim (Dallas).
+         Supported ICs are MAX3107, MAX3108.
+         Each IC contains 128 words each of receive and transmit FIFO
+         that can be controlled through I2C or high-speed SPI.
+
+         Say Y here if you want to support this ICs.
 
 config SERIAL_DZ
        bool "DECstation DZ serial driver"
@@ -686,7 +712,7 @@ config SERIAL_SH_SCI_CONSOLE
 
 config SERIAL_SH_SCI_DMA
        bool "DMA support"
-       depends on SERIAL_SH_SCI && SH_DMAE && EXPERIMENTAL
+       depends on SERIAL_SH_SCI && SH_DMAE
 
 config SERIAL_PNX8XXX
        bool "Enable PNX8XXX SoCs' UART Support"
@@ -704,6 +730,25 @@ config SERIAL_PNX8XXX_CONSOLE
          If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
          and you want to use serial console, say Y. Otherwise, say N.
 
+config SERIAL_HS_LPC32XX
+       tristate "LPC32XX high speed serial port support"
+       depends on ARCH_LPC32XX && OF
+       select SERIAL_CORE
+       help
+         Support for the LPC32XX high speed serial ports (up to 900kbps).
+         Those are UARTs completely different from the Standard UARTs on the
+         LPC32XX SoC.
+         Choose M or Y here to build this driver.
+
+config SERIAL_HS_LPC32XX_CONSOLE
+       bool "Enable LPC32XX high speed UART serial console"
+       depends on SERIAL_HS_LPC32XX
+       select SERIAL_CORE_CONSOLE
+       help
+         If you would like to be able to use one of the high speed serial
+         ports on the LPC32XX as the console, you can do so by answering
+         Y to this option.
+
 config SERIAL_CORE
        tristate
 
@@ -1104,6 +1149,24 @@ config SERIAL_SC26XX_CONSOLE
        help
          Support for Console on SC2681/SC2692 serial ports.
 
+config SERIAL_SCCNXP
+       tristate "SCCNXP serial port support"
+       depends on !SERIAL_SC26XX
+       select SERIAL_CORE
+       default n
+       help
+         This selects support for an advanced UART from NXP (Philips).
+         Supported ICs are SCC2681, SCC2691, SCC2692, SC28L91, SC28L92,
+         SC28L202, SCC68681 and SCC68692.
+         Positioned as a replacement for the driver SC26XX.
+
+config SERIAL_SCCNXP_CONSOLE
+       bool "Console on SCCNXP serial port"
+       depends on SERIAL_SCCNXP=y
+       select SERIAL_CORE_CONSOLE
+       help
+         Support for console on SCCNXP serial ports.
+
 config SERIAL_BFIN_SPORT
        tristate "Blackfin SPORT emulate UART"
        depends on BLACKFIN
@@ -1260,7 +1323,7 @@ config SERIAL_ALTERA_UART_CONSOLE
 
 config SERIAL_IFX6X60
         tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)"
-       depends on GPIOLIB && SPI && EXPERIMENTAL
+       depends on GPIOLIB && SPI
        help
          Support for the IFX6x60 modem devices on Intel MID platforms.