Merge tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd

[firefly-linux-kernel-4.4.55.git] / drivers / mtd / maps / Kconfig

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index c26938382f6488992828d211781b06d84ecde5e3..bed9d58d5741246f58bafe178851e8faf42744e2 100644 (file)
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -249,22 +249,6 @@ config MTD_LANTIQ
        help
          Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
 
-config MTD_DILNETPC
-       tristate "CFI Flash device mapped on DIL/Net PC"
-       depends on X86 && MTD_CFI_INTELEXT && BROKEN
-       help
-         MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP".
-         For details, see <http://www.ssv-embedded.de/ssv/pc104/p169.htm>
-         and <http://www.ssv-embedded.de/ssv/pc104/p170.htm>
-
-config MTD_DILNETPC_BOOTSIZE
-       hex "Size of DIL/Net PC flash boot partition"
-       depends on MTD_DILNETPC
-       default "0x80000"
-       help
-         The amount of space taken up by the kernel or Etherboot
-         on the DIL/Net PC flash chips.
-
 config MTD_L440GX
        tristate "BIOS flash chip on Intel L440GX boards"
        depends on X86 && MTD_JEDECPROBE
@@ -274,42 +258,6 @@ config MTD_L440GX
 
          BE VERY CAREFUL.
 
-config MTD_TQM8XXL
-       tristate "CFI Flash device mapped on TQM8XXL"
-       depends on MTD_CFI && TQM8xxL
-       help
-         The TQM8xxL PowerPC board has up to two banks of CFI-compliant
-         chips, currently uses AMD one. This 'mapping' driver supports
-         that arrangement, allowing the CFI probe and command set driver
-         code to communicate with the chips on the TQM8xxL board. More at
-         <http://www.denx.de/wiki/PPCEmbedded/>.
-
-config MTD_RPXLITE
-       tristate "CFI Flash device mapped on RPX Lite or CLLF"
-       depends on MTD_CFI && (RPXCLASSIC || RPXLITE)
-       help
-         The RPXLite PowerPC board has CFI-compliant chips mapped in
-         a strange sparse mapping. This 'mapping' driver supports that
-         arrangement, allowing the CFI probe and command set driver code
-         to communicate with the chips on the RPXLite board. More at
-         <http://www.embeddedplanet.com/>.
-
-config MTD_MBX860
-       tristate "System flash on MBX860 board"
-       depends on MTD_CFI && MBX
-       help
-         This enables access routines for the flash chips on the Motorola
-         MBX860 board. If you have one of these boards and would like
-         to use the flash chips on it, say 'Y'.
-
-config MTD_DBOX2
-       tristate "CFI Flash device mapped on D-Box2"
-       depends on DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD
-       help
-         This enables access routines for the flash chips on the Nokia/Sagem
-         D-Box 2 board. If you have one of these boards and would like to use
-         the flash chips on it, say 'Y'.
-
 config MTD_CFI_FLAGADM
        tristate "CFI Flash device mapping on FlagaDM"
        depends on 8xx && MTD_CFI
@@ -349,15 +297,6 @@ config MTD_IXP4XX
          IXDP425 and Coyote. If you have an IXP4xx based board and
          would like to use the flash chips on it, say 'Y'.
 
-config MTD_IXP2000
-       tristate "CFI Flash device mapped on Intel IXP2000 based systems"
-       depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000
-       help
-         This enables MTD access to flash devices on platforms based
-         on Intel's IXP2000 family of network processors. If you have an
-         IXP2000 based board and would like to use the flash chips on it,
-         say 'Y'.
-
 config MTD_AUTCPU12
        bool "NV-RAM mapping AUTCPU12 board"
        depends on ARCH_AUTCPU12
@@ -372,13 +311,6 @@ config MTD_IMPA7
          This enables access to the NOR Flash on the impA7 board of
          implementa GmbH. If you have such a board, say 'Y' here.
 
-config MTD_H720X
-       tristate "Hynix evaluation board mappings"
-       depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
-       help
-         This enables access to the flash chips on the Hynix evaluation boards.
-         If you have such a board, say 'Y'.
-
 # This needs CFI or JEDEC, depending on the cards found.
 config MTD_PCI
        tristate "PCI MTD driver"
@@ -433,15 +365,6 @@ config MTD_UCLINUX
        help
          Map driver to support image based filesystems for uClinux.
 
-config MTD_DMV182
-        tristate "Map driver for Dy-4 SVME/DMV-182 board."
-        depends on DMV182
-       select MTD_MAP_BANK_WIDTH_32
-       select MTD_CFI_I8
-       select MTD_CFI_AMDSTD
-        help
-          Map driver for Dy-4 SVME/DMV-182 board.
-
 config MTD_INTEL_VR_NOR
        tristate "NOR flash on Intel Vermilion Range Expansion Bus CS0"
        depends on PCI