Merge tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

[firefly-linux-kernel-4.4.55.git] / drivers / mfd / Kconfig

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f4b4dad77391590d02967faefc1476c5c65ac6b8..e129c820df7da7d6430e62891558f92cdbe235ab 100644 (file)
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -106,6 +106,19 @@ config UCB1400_CORE
          To compile this driver as a module, choose M here: the
          module will be called ucb1400_core.
 
+config MFD_LM3533
+       tristate "LM3533 Lighting Power chip"
+       depends on I2C
+       select MFD_CORE
+       select REGMAP_I2C
+       help
+         Say yes here to enable support for National Semiconductor / TI
+         LM3533 Lighting Power chips.
+
+         This driver provides common support for accessing the device;
+         additional drivers must be enabled in order to use the LED,
+         backlight or ambient-light-sensor functionality of the device.
+
 config TPS6105X
        tristate "TPS61050/61052 Boost Converters"
        depends on I2C
@@ -177,8 +190,8 @@ config MFD_TPS65910
        bool "TPS65910 Power Management chip"
        depends on I2C=y && GPIOLIB
        select MFD_CORE
-       select GPIO_TPS65910
        select REGMAP_I2C
+       select IRQ_DOMAIN
        help
          if you say yes here you get support for the TPS65910 series of
          Power Management chips.
@@ -409,6 +422,19 @@ config PMIC_ADP5520
          individual components like LCD backlight, LEDs, GPIOs and Kepad
          under the corresponding menus.
 
+config MFD_MAX77693
+       bool "Maxim Semiconductor MAX77693 PMIC Support"
+       depends on I2C=y && GENERIC_HARDIRQS
+       select MFD_CORE
+       select REGMAP_I2C
+       help
+         Say yes here to support for Maxim Semiconductor MAX77693.
+         This is a companion Power Management IC with Flash, Haptic, Charger,
+         and MUIC(Micro USB Interface Controller) controls on chip.
+         This driver provides common support for accessing the device;
+         additional drivers must be enabled in order to use the functionality
+         of the device.
+
 config MFD_MAX8925
        bool "Maxim Semiconductor MAX8925 PMIC Support"
        depends on I2C=y && GENERIC_HARDIRQS
@@ -454,9 +480,9 @@ config MFD_S5M_CORE
         of the device
 
 config MFD_WM8400
-       tristate "Support Wolfson Microelectronics WM8400"
+       bool "Support Wolfson Microelectronics WM8400"
        select MFD_CORE
-       depends on I2C
+       depends on I2C=y
        select REGMAP_I2C
        help
          Support for the Wolfson Microelecronics WM8400 PMIC and audio
@@ -473,6 +499,7 @@ config MFD_WM831X_I2C
        select MFD_CORE
        select MFD_WM831X
        select REGMAP_I2C
+       select IRQ_DOMAIN
        depends on I2C=y && GENERIC_HARDIRQS
        help
          Support for the Wolfson Microelecronics WM831x and WM832x PMICs
@@ -485,6 +512,7 @@ config MFD_WM831X_SPI
        select MFD_CORE
        select MFD_WM831X
        select REGMAP_SPI
+       select IRQ_DOMAIN
        depends on SPI_MASTER && GENERIC_HARDIRQS
        help
          Support for the Wolfson Microelecronics WM831x and WM832x PMICs
@@ -597,17 +625,32 @@ config MFD_MC13783
        tristate
 
 config MFD_MC13XXX
-       tristate "Support Freescale MC13783 and MC13892"
-       depends on SPI_MASTER
+       tristate
+       depends on SPI_MASTER || I2C
        select MFD_CORE
        select MFD_MC13783
        help
-         Support for the Freescale (Atlas) PMIC and audio CODECs
-         MC13783 and MC13892.
-         This driver provides common support for accessing  the device,
+         Enable support for the Freescale MC13783 and MC13892 PMICs.
+         This driver provides common support for accessing the device,
          additional drivers must be enabled in order to use the
          functionality of the device.
 
+config MFD_MC13XXX_SPI
+       tristate "Freescale MC13783 and MC13892 SPI interface"
+       depends on SPI_MASTER
+       select REGMAP_SPI
+       select MFD_MC13XXX
+       help
+         Select this if your MC13xxx is connected via an SPI bus.
+
+config MFD_MC13XXX_I2C
+       tristate "Freescale MC13892 I2C interface"
+       depends on I2C
+       select REGMAP_I2C
+       select MFD_MC13XXX
+       help
+         Select this if your MC13xxx is connected via an I2C bus.
+
 config ABX500_CORE
        bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
        default y if ARCH_U300 || ARCH_U8500
@@ -651,7 +694,7 @@ config EZX_PCAP
 
 config AB8500_CORE
        bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
-       depends on GENERIC_HARDIRQS && ABX500_CORE
+       depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
        select MFD_CORE
        help
          Select this option to enable access to AB8500 power management
@@ -722,6 +765,16 @@ config LPC_SCH
          LPC bridge function of the Intel SCH provides support for
          System Management Bus and General Purpose I/O.
 
+config LPC_ICH
+       tristate "Intel ICH LPC"
+       depends on PCI
+       select MFD_CORE
+       help
+         The LPC bridge function of the Intel ICH provides support for
+         many functional units. This driver provides needed support for
+         other drivers to control these functions, currently GPIO and
+         watchdog.
+
 config MFD_RDC321X
        tristate "Support for RDC-R321x southbridge"
        select MFD_CORE
@@ -854,6 +907,11 @@ config MFD_RC5T583
          Additional drivers must be enabled in order to use the
          different functionality of the device.
 
+config MFD_STA2X11
+       bool "STA2X11 multi function device support"
+       depends on STA2X11
+       select MFD_CORE
+
 config MFD_ANATOP
        bool "Support for Freescale i.MX on-chip ANATOP controller"
        depends on SOC_IMX6Q