select ARCH_BINFMT_ELF_RANDOMIZE_PIE
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select ARCH_HAVE_CUSTOM_GPIO_H
+ select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAS_GCOV_PROFILE_ALL
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select HARDIRQS_SW_RESEND
- select HAVE_AOUT
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
select HAVE_ARCH_KGDB
select HAVE_ARCH_SECCOMP_FILTER
default DRAM_BASE if REMAP_VECTORS_TO_RAM
default 0x00000000
help
- The base address of exception vectors.
+ The base address of exception vectors. This must be two pages
+ in size.
config ARM_PATCH_PHYS_VIRT
bool "Patch physical to virtual translations at runtime" if EMBEDDED
bool "IXP4xx-based"
depends on MMU
select ARCH_HAS_DMA_SET_COHERENT_MASK
+ select ARCH_SUPPORTS_BIG_ENDIAN
select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select CPU_XSCALE
MultiThreading at a cost of slightly increased overhead in some
places. If unsure say N here.
+config DISABLE_CPU_SCHED_DOMAIN_BALANCE
+ bool "(EXPERIMENTAL) Disable CPU level scheduler load-balancing"
+ help
+ Disables scheduler load-balancing at CPU sched domain level.
+
+config SCHED_HMP
+ bool "(EXPERIMENTAL) Heterogenous multiprocessor scheduling"
+ depends on DISABLE_CPU_SCHED_DOMAIN_BALANCE && SCHED_MC && FAIR_GROUP_SCHED && !SCHED_AUTOGROUP
+ help
+ Experimental scheduler optimizations for heterogeneous platforms.
+ Attempts to introspectively select task affinity to optimize power
+ and performance. Basic support for multiple (>2) cpu types is in place,
+ but it has only been tested with two types of cpus.
+ There is currently no support for migration of task groups, hence
+ !SCHED_AUTOGROUP. Furthermore, normal load-balancing must be disabled
+ between cpus of different type (DISABLE_CPU_SCHED_DOMAIN_BALANCE).
+ When turned on, this option adds sys/kernel/hmp directory which
+ contains the following files:
+ up_threshold - the load average threshold used for up migration
+ (0 - 1023)
+ down_threshold - the load average threshold used for down migration
+ (0 - 1023)
+ hmp_domains - a list of cpumasks for the present HMP domains,
+ starting with the 'biggest' and ending with the
+ 'smallest'.
+ Note that both the threshold files can be written at runtime to
+ control scheduler behaviour.
+
+config SCHED_HMP_PRIO_FILTER
+ bool "(EXPERIMENTAL) Filter HMP migrations by task priority"
+ depends on SCHED_HMP
+ help
+ Enables task priority based HMP migration filter. Any task with
+ a NICE value above the threshold will always be on low-power cpus
+ with less compute capacity.
+
+config SCHED_HMP_PRIO_FILTER_VAL
+ int "NICE priority threshold"
+ default 5
+ depends on SCHED_HMP_PRIO_FILTER
+
+config HMP_FAST_CPU_MASK
+ string "HMP scheduler fast CPU mask"
+ depends on SCHED_HMP
+ help
+ Leave empty to use device tree information.
+ Specify the cpuids of the fast CPUs in the system as a list string,
+ e.g. cpuid 0+1 should be specified as 0-1.
+
+config HMP_SLOW_CPU_MASK
+ string "HMP scheduler slow CPU mask"
+ depends on SCHED_HMP
+ help
+ Leave empty to use device tree information.
+ Specify the cpuids of the slow CPUs in the system as a list string,
+ e.g. cpuid 0+1 should be specified as 0-1.
+
+config HMP_VARIABLE_SCALE
+ bool "Allows changing the load tracking scale through sysfs"
+ depends on SCHED_HMP
+ help
+ When turned on, this option exports the load average period value
+ for the load tracking patches through sysfs.
+ The values can be modified to change the rate of load accumulation
+ used for HMP migration. 'load_avg_period_ms' is the time in ms to
+ reach a load average of 0.5 for an idle task of 0 load average
+ ratio which becomes 100% busy.
+ For example, with load_avg_period_ms = 128 and up_threshold = 512,
+ a running task with a load of 0 will be migrated to a bigger CPU after
+ 128ms, because after 128ms its load_avg_ratio is 0.5 and the real
+ up_threshold is 0.5.
+ This patch has the same behavior as changing the Y of the load
+ average computation to
+ (1002/1024)^(LOAD_AVG_PERIOD/load_avg_period_ms)
+ but removes intermediate overflows in computation.
+
+config HMP_FREQUENCY_INVARIANT_SCALE
+ bool "(EXPERIMENTAL) Frequency-Invariant Tracked Load for HMP"
+ depends on SCHED_HMP && CPU_FREQ
+ help
+ Scales the current load contribution in line with the frequency
+ of the CPU that the task was executed on.
+ In this version, we use a simple linear scale derived from the
+ maximum frequency reported by CPUFreq.
+ Restricting tracked load to be scaled by the CPU's frequency
+ represents the consumption of possible compute capacity
+ (rather than consumption of actual instantaneous capacity as
+ normal) and allows the HMP migration's simple threshold
+ migration strategy to interact more predictably with CPUFreq's
+ asynchronous compute capacity changes.
+
+config SCHED_HMP_LITTLE_PACKING
+ bool "Small task packing for HMP"
+ depends on SCHED_HMP
+ default n
+ help
+ Allows the HMP Scheduler to pack small tasks into CPUs in the
+ smallest HMP domain.
+ Controlled by two sysfs files in sys/kernel/hmp.
+ packing_enable: 1 to enable, 0 to disable packing. Default 1.
+ packing_limit: runqueue load ratio where a RQ is considered
+ to be full. Default is NICE_0_LOAD * 9/8.
+
config HAVE_ARM_SCU
bool
help
for (multi-)cluster based systems, such as big.LITTLE based
systems.
+config BIG_LITTLE
+ bool "big.LITTLE support (Experimental)"
+ depends on CPU_V7 && SMP
+ select MCPM
+ help
+ This option enables support for the big.LITTLE architecture.
+
+config BL_SWITCHER
+ bool "big.LITTLE switcher support"
+ depends on BIG_LITTLE && MCPM && HOTPLUG_CPU
+ select CPU_PM
+ select ARM_CPU_SUSPEND
+ help
+ The big.LITTLE "switcher" provides the core functionality to
+ transparently handle transition between a cluster of A15's
+ and a cluster of A7's in a big.LITTLE system.
+
+config BL_SWITCHER_DUMMY_IF
+ tristate "Simple big.LITTLE switcher user interface"
+ depends on BL_SWITCHER && DEBUG_KERNEL
+ help
+ This is a simple and dummy char dev interface to control
+ the big.LITTLE switcher core code. It is meant for
+ debugging purposes only.
+
choice
prompt "Memory split"
default VMSPLIT_3G
Enable hardware performance counter support for perf events. If
disabled, perf events will use software events only.
+config SYS_SUPPORTS_HUGETLBFS
+ def_bool y
+ depends on ARM_LPAE
+
+config HAVE_ARCH_TRANSPARENT_HUGEPAGE
+ def_bool y
+ depends on ARM_LPAE
+
source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
projects / firefly-linux-kernel-4.4.55.git / blobdiff